13 best toilet bowl bolts
Toilet bowl bolts, also known as closet bolts or toilet flange bolts, are essential components in toilet installations and repairs. These bolts play a critical role in securing the toilet to the floor and ensuring a watertight connection between the toilet and the drain pipe. Here's what you need to know about toilet bowl bolts:
Materials: Toilet bowl bolts are typically made of solid brass or stainless steel. These materials are chosen for their corrosion resistance, durability, and strength. Stainless steel is a popular choice due to its rust-resistant properties.
Length: Toilet bowl bolts come in various lengths to accommodate different toilet and floor configurations. It's important to select bolts that are long enough to extend through the toilet base, wax ring, and into the floor flange, ensuring a secure attachment.
Threaded Ends: The upper ends of the toilet bowl bolts are threaded to allow for secure attachment of nuts and washers.
Slotted Heads: The lower ends of the bolts have slotted heads, which help anchor the bolts in place during installation.They can be adjusted to the desired height, and when tightened, they prevent the toilet from rocking or shifting.
Wax Ring Placement: Toilet bowl bolts are inserted through the wax ring, which creates a watertight seal between the toilet and the drain pipe. Proper placement and alignment of the wax ring with the bolts are crucial to prevent leaks.
Securing Nuts and Washers: After positioning the toilet over the bolts, nuts and washers are used to secure the toilet to the floor. The nuts are threaded onto the bolts, and washers are placed between the nuts and the porcelain base of the toilet.
Tightening: It's important to evenly and snugly tighten the nuts on the toilet bowl bolts to create a secure seal without over-tightening, which could crack the toilet's base.
Leak Prevention: Proper installation of toilet bowl bolts and a wax ring is essential to prevent leaks. Any misalignment or loose bolts can lead to water leakage, which can cause damage to the floor and subfloor.
Replacement: In cases of toilet repairs or if the toilet needs to be removed, the existing toilet bowl bolts may need replacement. Old or corroded bolts can be challenging to work with and may not provide a secure seal.
In summary, toilet bowl bolts are crucial components in toilet installation and repair. Their proper selection, placement, and installation are vital to ensure a watertight and secure connection between the toilet and the drain pipe. Using high-quality materials and following proper installation procedures is essential to prevent leaks and maintain the integrity of the bathroom's plumbing system.
Below you can find our editor's choice of the best toilet bowl bolts on the market
2 Pack Toilet Tank to Bowl Bolt Kits, Heavy Duty Bolts Toilet Bolts for Tank Solid Brass with Extra Long Nuts Easy to install and Double Gaskets for Fastening
- 1.Quick and easy install: Extra long nut on lower side (bottom lock) is great for easy installation. And as locking nuts to avoid shifting.
- 2.Tank to bowl bolts: Large rubber gromets on both upper and lower sides. This secures and seals the toilet tank to the bowl.
- 3.Application: Hibbent bolts, screws and gaskets are what you need to install and secure your toilet.
- 4.Toilet Tank Screws Material: Hibbent bolts are made from solid brass, and all gaskets are made from high-quality rubber.
- 5.Customer Service: Hibbent ensures 100% satisfied customer service.
User questions & answers
| Question: | is this for 2 pairs for a total of |
| Answer: | Yes, it is for the bolts that attach the tank to the toilet bow. It is easy to repair the toielt tank with the long stainless steel nut. |
| Question: | Will this fit a 18 year old toto toilet |
| Answer: | Depends how old! My toilet 2005. So I hope that helps |
| Question: | Will this work with american standard cadet pressure assisted 2 piece toilet? this is for the bolts that attach the tank to the toilet |
| Answer: | I've never used on 5/4 lumber but it should work. My last project was full thickness 2x10x10 cedar for a deck. It worked great. However, I used three of these with the ten foot lumber. Also used three with 14 + 16 foot treated lumber for a deck. I would not do a wood deck without using these. |
| Question: | Will this product fit an older model tank American Standard |
| Answer: | I not 100% sure, although I haven't used concealed fasteners, I think that my understanding is that some of them actually have built in spacing on the fasteners. You might want to look them up to be sure. |
Product features
2 PACK Toilet Tank to Bowl Bolt Kits
- 1.Includes two brass bolts, four brass gaskets and four rubber washers.
- 2.Two extra long bottom lock nuts and 2 normal brass nuts.
- 3.Fits all brands of toilets.
Tank to bowl toilet tank screws with washers and nuts
- 4* Brass flat washers
- 4* Black rubber washers
- 2*Brass nuts
- 2*Brass bolts
- 2* Extra long brass lock nuts
The installation can be divided into three steps:
- Inside the Tank: Larger black washers for stoping water leak inside the toilet tank.
- Between Tank and Bowl: Brass flat washer and brass nut for connect tank and toilet bowl.
- Bottom of Bowl: Small Black and Brass flat washer for under the toilet bowl.
- Extra Long Brass Nuts for Downlock the bolt.
DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 2-Set (80156)
Danco
Product description
Danco is one of the largest plumbing repair, replacement, and remodel suppliers in the home improvement industry focused largely on empowering 'Do-It-Yourself' consumers with plumbing solutions that are as practical as they are affordable, giving your home a more fresh appeal and renewed elegance. We provide stylish design-oriented innovative home solutions that are user-friendly to support and encourage customers to tackle home improvement tasks on their own - without the heavy price tag of professional services. These Danco closet bolts will be the final touch as you finish remodeling your bath. These bolts anchor the toilet to the floor once you have set everything in place. They are pure brass and are complete with washers. Order yours today
From the Manufacturer
Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry. We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing decors for bathrooms and kitchens.
- INCLUDES 2 BOLTS, washers and nuts in the set
- SECURELY FASTENS a toilet bowl to the floor
- DURABLE BRASS CONSTRUCTION provides strength and reliability
- EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
- CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
User questions & answers
| Question: | why is magnet attract the closet bolts, washers and nuts |
| Answer: | I ordered a second QC 3.0 USB fast charger port and just swapped the quick charger for the regular USB. It's just a standard size, so they all work. |
| Question: | These can be used to hold a toilet seat on |
| Answer: | Plastic or Metal enclosure both ok for this switch. But the thickness of enclosure should less than 10mm. And the depth of enclosure should more than 27mm. Maybe the 125B enclosure is ok for you, the ASIN is B07VNCDSN7 |
| Question: | Where does this thin black rectangular metal piece go (it's pictured underneath the washer |
| Answer: | The terminals of this switch are from left to right: POWER, LOAD, GROUND, which are also marked on the label of the switch, hope to help you. |
| Question: | Are the included nuts metal or plastic? Some of the reviews and an earlier question say plastic, picture shows metal |
| Answer: | This switch is with 30A 12VDC rating, So of course it can be used with 1A, Even 0.1A is also ok. |
Product features
Right Part. Real Savings.
These Danco closet bolts will be the final touch as you finish remodeling your bath. These bolts anchor the toilet to the floor once you have set everything in place. They are pure brass and are complete with washers. Order yours today!
Toliet Bolts,Tank to Bowl Stainless Stell 5/16inch by 3Inch Heavy Duty Bolts with Rubber and Stainless Steal Washers and Wing Nuts,Toliet Bolt
Product description
HD Three Inch Toilet Bolts to lock the tank to the bowl. Bolts, Wingnuts, and washers are all Stainless Steel with locking Stainless Steel Nuts. Product Description
- H.D Stainless Steel Bolts
- Large Rubber Gromets onboth upper and lower sides.
- Wing nuts for easy install
- All stainless for no rust problems.
- Includes Locking Nuts to avoid Shifting
User questions & answers
| Question: | One reviewer claims the wingnuts are not stainless steel. Are they or aren't they |
| Answer: | We have these bolts in two or three in a package for American Standard. Check your toilet for how many bolts you need. |
| Question: | I was sent this item with 5 stainless washers, but your images don't show more than 2 installed. Do they go above the top rubber washer |
| Answer: | They are standard tank bolts. If you need something specific I would recommend a specialty store since these are good but low grade stainless. |
| Question: | Does this fit an American standard toilet |
| Answer: | Hi, it is total of 2 |
| Question: | What are Threads per inch |
| Answer: | it will fit |
Fluidmaster 7530P8 Better Than Wax Waxless Toilet Gasket, 1
Fluidmaster
Product description
Looking for a superior solution to an old problem? That is why Fluidmaster has introduced the Better Than Wax no leaks, worry-free toilet seal. Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won't cause leaks. Plus, you don't have to worry about getting wax on your hands, floor, and toilet. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts & hardware. Complete your next project feeling confident that you have chosen the Better Than Wax Toilet Seal.
From the Manufacturer
Looking for a superior solution to an old problem? That is why Fluidmaster has introduced the Better Than Wax no leaks, worry-free toilet seal. Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won't cause leaks. Plus, you don't have to worry about getting wax on your hands, floor, and toilet. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts & hardware. Complete your next project feeling confident that you have chosen the Better Than Wax Toilet Seal.
- No wax, no mess and can be repositioned; No-rust brass bolts & hardware
- Plunging won't cause leaks; 10-year warranty
- Fits any flange, any toilet
- No minimum temperature required for installation
- Seals on uneven floors or over tile floors with recessed flanges
User questions & answers
| Question: | Will tis extend for counter sunk holes? I needed two wax rings last time. Will this work to replace height of 2 was rings |
| Answer: | In description it says 1/4" x 31/2' bolts. Hope this helps. |
| Question: | will it work on a drain that is only 2 1/2 opening |
| Answer: | 1/4" |
| Question: | What is the difference between Fluidmaster 7530 and 7530P |
| Answer: | They are solid brass. |
| Question: | for one, but for a 2 pack the price is $31.44. Why is it way more than 3 times |
| Answer: | I found these to be very good quality. Worked perfectly. |
Product features
Better Than Wax
Looking for a superior solution to an old problem? That is why Fluidmaster has introduced the Better Than Wax no leaks, worry-free toilet seal. Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won't cause leaks. Plus, you don't have to worry about getting wax on your hands, floor, and toilet. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts and hardware.
Fluidmaster 7110A-001-P10 Setfast Self-adjusting Toilet Bowl To Floor Bolts, Brass
Fluidmaster
Product description
The Fluid master 7110A Set Fast Adjustable Closet Toilet Bolts are designed to be an easy to install bowl-to-floor bolt set, that eliminates cutting or breaking off. The innovative design allows for a quick twist adjustment, so the toilet bowl bolts either shorten or lengthen for a perfect fit. This closet bolt kit includes all you need to set your toilet fast, including adjustable brass toilet bolts, brass nuts and stainless steel washers. Built to last this design offers a 1 year and durable brass construction for strength and corrosion protection. For the fastest bowl-to-flange installation possible choose Fluid master's Set Fast Toilet Bolts.
- Quickly reset and seal your toilet bowl to flange with adjustable closet toilet bolts
- Easy to install, no cutting or breaking off
- Self-adjusting design, simply screw up or down to fit
- Size 5/16 in. and between 2-1/4 in. - 1-1/2 in. length
- Durable solid brass bolts for a long lifespan
- 1 year
User questions & answers
| Question: | Are these bolts 5/16" or 1/4" in diameter |
| Answer: | 3.5" high, 4" wide, 2" deep |
Product features
Fluidmaster 7110A SetFast Adjustable Closet Toilet Bolts
Universal White Plastic Toilet Seat Hinge Bolt Screw For Top Mount Toilet Seat Hinges, 2 Pack
Qualihome
Product description
These Qualihome Toilet Seat Hinge Bolts offer an easy alternative to replacing an entire toilet seat
They feature a sturdy plastic construction that provides strength and durability
These hinge bolts are used for securing the toilet seat onto the toilet bowl
Easy do-it-yourself installation instructions included
Replacement bolts for top mount toilet seat hinge, White finish, Easy to install
- These Qualihome Toilet Seat Hinge Bolts offer an easy alternative to replacing an entire toilet seat
- They feature a sturdy plastic construction that provides strength and durability
- These hinge bolts are used for securing the toilet seat onto the toilet bowl
- Easy do-it-yourself installation instructions included
- Replacement bolts for top mount toilet seat hinge, White finish, Easy to install
User questions & answers
| Question: | Please provide dimensions |
| Answer: | The bottom part is a nut. Just unscrew it and insert the bolt in the holes. The bolts were too thick for my seat hinges so I couldn’t use them. |
| Question: | How long are this bolts |
| Answer: | I'm measuring 7/16 - the seat I'm using is 5/16, so I'm needing to drill the seat to get these in. The head is 9/16ths, so there's not a lot of support here. I'm going to try drilling to 3/8" and hope I can squeeze this in. |
| Question: | how does screw with top go into seat hinges |
| Answer: | NuFlush wingnuts are stainless steel. |
| Question: | It is not clear why they don't just give the bolt mesurement, mine are 3/8". so what size are these |
| Answer: | Stainless steel washers are not required on the rubber washer. As shown in the picture, each pair of bolts consists of two pairs of waterproof rubber gaskets, a pair of stainless steel washers, a pair of stainless steel nuts and a pair of stainless steel wing nuts. They are packed together in a package. If you have extra washers, you can leave it as a spare. Our products are shipped by Amazon Logistics. After the purchase, you can get them in a short time. If you have any other questions, please feel free to contact us. |
Fluidmaster Tank To Bowl Bolt Kit 6101
Fluidmaster
Product description
The Fluidmaster 6101 Universal Tank-To-Bowl Bolts are made to last. Hardware featuring solid brass and stainless steel materials help resist corrosion and ensure a secure toilet tank for a long time. The stainless steel nuts and washers are also included for complete replacement of all old hardware. Tank Bolts are proven durable, and the 5/16” size x 2 ¾” length will fit most brands and models. Repair your rocking toilet tank with new toilet bolts.
From the Manufacturer
6101 2-3/4-Inch Tank to Bowl Bolts. Durable solid-brass bolts with washers and nuts. Installs Easily.
- Replace old bolts and secure your toilet tank with new brass bolts and hardware
- Easy to install, universal design works with most toilets
- Includes: 2 solid brass bolts, metal washers and nuts, plastic washers
- Stainless Steel washers resist rust and corrosion
- 2 ¾” long x 5/16” size solid brass bolts, built to last
User questions & answers
| Question: | What is the nut size so i can buy the proper socket |
| Answer: | The bolts are: 2 & 3/4 inch long by 5/16 inch solid brass.. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
| Question: | Are they solid brass bolts and washers |
| Answer: | Fluidmaster provides for an extra washer and hex nut in order for you to seal the tank with a washer and nut first, before setting the tank onto the bowl. By securing the bolt into the tank first we can try and stop leaks from the bolts. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
| Question: | Product info say 2 3/4" bolts. Are you sure they are not 3/8" bolts |
| Answer: | Screw is 2 3/4" inch tall. The bolt that fits come with the screw. As long as your hole is 3/4" big, it should fit. I think toilets are pretty standard. |
| Question: | Why are there four sets of washers and bolts |
| Answer: | 3 -3 1/2 inches, they are long enough for any toilet... |
Product features
Fluidmaster 6101 2-3/4-Inch Tank to Bowl Bolts
This secures and seals the toilet tank to the bowl. Fluidmaster bolts, screws and gaskets are what you need to install and secure your toilet. All bolts are made from solid brass, and all gaskets are made from high-quality rubber.
Fluidmaster The Leader In Toilet Repair
Fluidmaster is one of the toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Toilet Tank Plastic Bolts, 4 PACK M10 Tank to Bowl Bathroom Toilet Repair Kits Fitting Screws and Seal Set, Pan Head Bolts Fits Two Piece Toilet(White)
Product description
Great to replace old rusted out tank bolts.
Features:
Toilet tank plastci bolts, comes with 4 pieces toilet seat bolts, provide an easy alternative to replacing.
Made of durable plastic and rubber, built to last.
Bolts can be cut off, If needed after you install seat for an exact fit.
Specifications:
Quantity: 4 x Toilet Seat bolts
Material: plastic and rubber
Color: white
Size: 3/8-inch in thread diameter, 4 inch in length
- Anti corrosion POM plastic screws, will not rust, corrode, mineralize or bind.
- Help solve your toilet tank bolts corrosion issue.
- Easy to install and replace, don’t over tighten them, holds well against leaks
- Four inch bolts fit most two piece toilets.
- Screw length could be customized per needs.
User questions & answers
| Question: | Are these universal? I have a Mansfield toilet |
| Answer: | Thank you for your question. The nut diameter is ½ inch. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
| Question: | Okay so it will never corrode, I like that. But is it as durable as brass? Do you worry about stripping the plastic threads |
| Answer: | Thank you for posting this review concerning our product 6101. Yes the bolts are brass all the way through. If you need help with your installation or have any concerns contact Fluidmaster’s Technical Service Department as we are available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
Fluidmaster Tank To Bowl Bolt & Gasket Kit 6102
Fluidmaster
Product description
6102 Toilet Tank-To-Bowl - 2 3/4"Bolts And Gasket
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Since 1957, we have been guiding our customers to the right toilet repair solutions. Fluidmaster is dedicated to making the installation of its products easy and simple with a complete line of toilet repair parts including: fill valves, single and dual flush valves, flappers, tank levers, toilet seals (bowl wax and wax-free), toilet repair kits, flush valve seals, connectors and more. Fluidmaster parts are found in more toilets than all other brands combined. Fluidmaster distributes to over 90 countries and is the trusted brand by toilet manufacturers and professionals worldwide.
- TANK-TO-BOWL 2 BOLTS & GASKET KIT
User questions & answers
| Question: | Are the nuts and washers made of brass? The picture makes them appear to be some sort of steel |
| Answer: | The gasket is designed to fit over the lock nut of the flush valve for a two piece toilet. The flush valve system needs to be a 2 inch drain for this gasket to work. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
| Question: | Will it work on a Toto tank |
| Answer: | Our bolts are brass plated stainless steel. NuFlush |
| Question: | Will this fit over the plastic but on the bottom of the tank |
| Answer: | I don't see any reason they can't be used as long as you have a 2 piece toilet but even if they don't 10.00 isn't really worth getting upset about |
| Question: | Are these bolts made of solid brass, or brass-plated |
| Answer: | The bolts that I received were not as described: they were for attachment of the seat, not the tank. |
Product features
Fluidmaster 6102 2-3/4-Inch Tank to Bowl Bolts and Gasket
This gasket seals the toilet tank to the bowl. Fluidmaster bolts, screws and gaskets are what you need to install or repair a rocking toilet. Includes a high-quality rubber gasket and brass bolts with hardware.
Fluidmaster The Leader In Toilet Repair
Fluidmaster is one of the leading repair brands in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Universal Toilet Tank To Bowl Gaskets with 3 Sets Brass Hardware Kits Fits Most 2-Inch 2.5-Inch flush valve opening 2-Piece Toilet Tanks
- 1.Tank to Bowl Coupling Kits: Universal Tank-to-Bowl gasket replacements with tank to bowl bolts.
- 2.Fits 2" flush valve opening: The 2 inch Tank to Bowl Gasket and Hardware Kit is universal to fit most 2 inch two-piece toilet tanks.
- 3.Tank To Bowl Bolts: The included hardware kits are brass to ensure long lasting. Special designed extra long nuts are for easy installation.
- 4.Longest Lasting Materials: Tank-to-bowl gasket made from long lasting sponge rubber construction.
- 5.Easy to install: Including totally 3 sets toilet tank to bowl bolts and 2 size of gaskets(2 inch +2.5 inch) for fit flush valve opening.
User questions & answers
| Question: | will this work with a Cato toilet |
| Answer: | Yes, it is for the bolts and rubber seals that attach the tank to the toilet bowl, to prevent the toilet tank leaking. It is easy to repair the toielt tank with the long stainless steel nut. |
| Question: | where does the small nut go? inside the tank or under the tank |
| Answer: | There is no such thing as a 28gpf toilet. Figure out what you actually haveand we'll try to help you. |
| Question: | Will this work with american standard model # 2462.100.020? this is for the bolts that attach the tank to the toilet |
| Answer: | Thank you for your question concerning 6102 2-3/4-Inch Tank to Bowl Bolts and Gasket. The washers and nuts are not brass. Since these washers do not come into direct contact with water these items can be made from steel where they will be safe from corrosion. For additional questions on any Fluidmaster product please contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
| Question: | Will this work with kohler toilets -this is a 2009 model toilet 28gpf |
| Answer: | Most Toto toilets use a larger flush valve and if your Toto toilet has a 3 inch flush valve this bowl gasket will not fit. For additional questions on this Fluidmaster product or help with selecting a product please contact Fluidmaster at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
Product features
Universal Toilet Tank To Bowl Gaskets for Most 2'' /2.5'' Flush Valve Opening
- 1.This gasket seals the toilet tank to the bowl
- 2.Including Bolts, screws and gaskets are what you need to install
- 3.Made of Sponge Rubber material
- 4.High quality rubber seal
- 5.Installs Easily
- 6.Including Bolts, screws and gaskets are what you need to install
The installation steps:
- Inside the Tank: Larger black washers for stoping water leak inside the toilet tank.
- Between Tank and Bowl: Brass flat washer and brass nut for connect tank and toilet bowl.
- Bottom of Bowl: Small Black and Brass flat washer for under the toilet bowl.
- Extra Long Brass Nuts for Downlock the bolt.
Package including:
- 2 inch Sponge Gasket
- 2.5 inch Sponge Gasket
- 3 Sets of brass bolts with hardware
Toilet Floor Bolts and Caps Set, Universal Toilet Bowl to Floor Bolts Solid Brass, Including 2 Brass Bolts, 4 Bolt Caps with Nuts/Washers Toilet Bolts Heavy Duty Bolts Closet Bolt Set, Solid Brass
Product description
Floor bolts features:
1.These bolts are made of long-lasting durable brass.
2.One pair bolts with double nuts and washers for toilet upside and bottom.
3.Universal fit for most toilet.
4.Solid brass closet bolt set.
Amazing features of Bolt caps:
1.Easy and simple use kit
2.White / almond plastic finish
3.Round caps
4.Used to cover toilet bolts
5.Mounting piece included
6.Universal easy DIY project, fits most
Package including:
2 * Toilet bolts caps in white color: 3.6 cm/ 1.44 inch height
2 * Toilet bolts caps in almond color: 2.8 cm/1.1 inch height
2 * Brass T-bolts with brass nuts and rubber washers
4 * Transparent retainer washers
4 * Brown retainer washers
- 1.Toilet Floor Bolts: Secures the toilet bowl to floor flange. T-bolts and nuts are made of solid brass.
- 2.Brass plated components: 2 pcs brass T-bolts, 4 brass plated open end nuts, 4 metal washers, 4 rubber washer, plastic washers.
- 3.High quality bolt caps: High quality plastic constructed bolt caps ensure the durability and life span. 2 pairs bolt caps are in 2 different heights: 1.44 inch and 1.1 inch.
- 4.Installs Easily: Easy DIY project. Toilet floor bolts fit most toilet. We offer manual and you can follow the product instruction step by step.
- 5.Package including: 2 pack toilet floor bolts sets with nuts and washers, 4 toilet bolt caps, 4 white retainer washers, 4 brown retainer washers.
User questions & answers
| Question: | What are these made of? Plastic? Ceramic? Metal |
| Answer: | Don't need relay, this switch can be used well under 100 watt. |
Fluidmaster 7111 Universal 3-Inch Bowl to Floor Bolts, Includes 2 Brass Bolts
Fluidmaster
Product description
Fluidmaster 7111 Universal 3-Inch Bowl to Floor Bolts, Includes 2 Brass Bolts
From the Manufacturer
7111 3-Inch Bowl to Floor Bolts. Installs Easily. Fits All Brands.
- Manufactured in China
- Easy to use
- Highly durable
- Installs Easily
- Fits All Brands
- 1 Year
- Installs Easily
User questions & answers
| Question: | What is the thread size? 1/4" or |
| Answer: | I can't recall specifically, but I will say I'd never use plastic, and I don't recall being annoyed by them, so I'm pretty certain they're metal |
| Question: | What diameter are these bolts |
| Answer: | Plastic. |
| Question: | Description says solid brass bolts. are they solid or plated |
| Answer: | No it comes with everything there and fuses but you don’t need a relay |
| Question: | How good is the quality |
| Answer: | 4.1" w X 3.4" h X 1.77" d See photo 4 in description. |
Product features
Fluidmaster 7111 3” Bowl to Floor Bolts
Secures toilet bowl to floor flange. Fluidmaster quality toilet bowl 3-1/2”brass bolts, stainless washers and nuts.
Fluidmaster The Leader In Toilet Repair
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Fluidmaster Tank to Bowl Bolt & Gasket Kit 6106
Fluidmaster
Product description
Fluidmaster Tank to Bowl Bolt & Gasket Kit 6106
From the Manufacturer
6106 2-3/4-Inch Tank to Bowl - Three Bolts and Gasket. Durable solid-brass bolts with washers and nuts. Installs Easily.
- TANK TO BOWL 3 BOLTS & GASKET KIT
User questions & answers
| Question: | Will this work for a Gerber toilet that requires the recess in the gasket for the flush valve nut |
| Answer: | Yes it’s universal very easy |
| Question: | Will this work on Kohler standard toilet |
| Answer: | This gasket is designed to be used with a 2 inch flush valve system for a toilet and should only be used in the application it was designed for - Toilets. For additional questions on this Fluidmaster product or help with selecting a product please contact Fluidmaster at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. |
| Question: | My toilet tank is Mansfield 160. Does the kit will work on my tank |
| Answer: | Hi, gaskets fit for only 2 inch flush opening. Check yours before order. Thank you. |
| Question: | Will the seal go over the plastic 2 inch hex nut at the base of the tub |
| Answer: | It goes under the tank. |
Product features
Fluidmaster 6106 Tank to Bowl Gasket and Hardware
This secures and seals the toilet tank to the bowl. Fluidmaster bolts, screws and gaskets are what you need to install and secure your toilet. All bolts are made from solid brass, and all gaskets are made from high-quality rubber.
Fluidmaster The Leader In Toilet Repair
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Latest Reviews
View all
Nintendo Camera For Kids
- Updated: 28.02.2023
- Read reviews
Chicago Pneumatic Wrench
- Updated: 11.02.2023
- Read reviews
Wifi Cable Modems
- Updated: 16.02.2023
- Read reviews
Loops
- Updated: 06.03.2023
- Read reviews
Sam Edelman Clogs
- Updated: 07.01.2023
- Read reviews
Nintendo Camera For Kids
- Updated: 28.02.2023
- Read reviews
Chicago Pneumatic Wrench
- Updated: 11.02.2023
- Read reviews
Wifi Cable Modems
- Updated: 16.02.2023
- Read reviews
Loops
- Updated: 06.03.2023
- Read reviews
Sam Edelman Clogs
- Updated: 07.01.2023
- Read reviews
Nintendo Camera For Kids
- Updated: 28.02.2023
- Read reviews