12 best craftsman table saws

Product description

Get your work done from the inside. The V20* cordless 7-in. Compact wet tile saw features water fill-lines inside the tube to help maintain excellent water containment whether the product is being used inside or outside. The innovative sliding cart allows for improved accuracy while allowing the user to have ease of use during tile cutting applications. Store in a compact place, on the job or in the truck, and easy maneuverability with the roll cage handles.

• Ease of cutting: innovative sliding cart for improved accuracy
• Extra large cutting capacity: 17-in. Of cutting capacity
• Indoor use: excellent water containment
• Excellent water containment: water fill-lines inside Tub help maintain excellent water containment
• Maneuverability: roll cage handle for easy carrying

User questions & answers

Question:	Can i put a wood blade on this
Answer:	No, this saw is intended for tile cutting applications only.
Question:	Dewalt 20v batteries will work correct
Answer:	DEWALT and CRAFTSMAN are sister companies but we are individual products. They are not interchangeable.

Product description

CRAFTSMAN saw blades are a great value for an economy blade. Induction-brazed carbide teeth provide durability and long life, while precision grinding makes for smooth accurate cuts. The steel plate is heat-treated to reduce warping and then a corrosion resistant coating is added to prevent rust.

• Induction-brazed Carbide tips for durability and long life
• Heat-treated plate eliminates warping
• Precision ground teeth for smooth, accurate cuts
• Corrosion resistant coating designed to prevent rust

User questions & answers

Question:	What size arbor do these fit
Answer:	5/8in
Question:	Are these flat kerf blades
Answer:	Pretty close. I was impressed. But they're not labeled as flat kerf, I believe.
Question:	Is the arbor size 1/2 inch
Answer:	Arbor Diameter = 5/8-in
Question:	Will these blades fit sears model number
Answer:	I think the saw number is 137.212410? If so, the blade should work fine as long as the arbor hole is 5/8" diameter. The blade should work for any saw requiring a 10" blade with 5/8" arbor.

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This circuit breaker (part number 0LSL) is for table saws. Circuit breaker 0LSL stops the flow of electricity through the table saw if an overload or short circuit occurs. Unplug the table saw before installing this part. Wear work gloves to protect your hands. For Craftsman, Tradesman, & Companion.

• This part is compatible with models including; 137218240,137218020,137248830,137218040,137218041,137218101,137218300,137248850,137218100,137284630,137415020,137218301,137218010,137218073,137218030,137248101,137248100,137248840,137218071,137218072,137271180,137218070,137232040,55-6883-2,137248481,137248880,137248480
• This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 2853D55521
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman,Tradesman,Companion
• This circuit breaker (part number 0LSL) is for table saws
• Unplug the table saw before installing this part

Product description

This key is an OEM injection molded part. It is not a 3D printed copy.

• This Safety Key fits many Sears Craftsman Rocker Style, Power Switchs used on many models of Craftsman power tools.
• Key head is and approximate 7/8" in diameter but is slightly oval shaped. The longest leg is about 15/16" and the short leg is about 5/8" long.
• Sears sold this key under several part numbers including 22255, 60256, and 976863-001.
• The last picture shows the key installed in a typical switch. This listing is for the KEY ONLY.

User questions & answers

Question:	Does this fit sears jointer
Answer:	Yes, this is the correct replacement key for your jointer as long as your jointer has it's original rocker switch. Your switch should look like the one in the last photo of the listing.
Question:	will this fit a craftsman spindle sander model
Answer:	I believe there are one too many 2's in your model number. If you model number is 113.2225705 this is the correct key for your sander. Best regards, Or1More Tools
Question:	Does this fit a delta small bandsaw model 28-180 ? it looks like it
Answer:	This key will not fit the original switch on a Delta 28-180 bandsaw. Please see the pictures in this listing of the switch with the key installed.
Question:	looking red switch key for #113 226880, 113 298090 table saw
Answer:	This is the correct safety key for your model table saw. The safety key is yellow and the rocker switch is red.

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This table (part number 821367) is for radial arm saws. Table 821367 attaches to the radial arm saw and provides a stable workspace. Unplug the radial arm saw before installing this part. Wear work gloves to protect your hands. For Craftsman.

• This part is compatible with models including; 113199270,113199250,11319771,11319770,113197732,113196421,113190060,113197731,113197752,113195250,113199410,113196380,113196221,113196320,113197751,113199350,113196321,113196420,113197750,113199450,113196120,113196220,113190600,11319707-0,113197702,113197701,113199200,113199300,113190650
• This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 63948,63675
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
• This table (part number 821367) is for radial arm saws
• Unplug the radial arm saw before installing this part

User questions & answers

Question:	What are it’s dimensions
Answer:	Rear Table, 63675 1" x 2" x 40" Table Spacer, 63429 1" x 6.75" x 40" Rip Fence, 63432 .75" x 1.75" x 44" Front Table, 63674 1" x 18" x 40"

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This screw (part number 31114.00) is for table saws. Follow appropriate safety practices when installing screw 31114.00. For Craftsman.

• This part is compatible with models including; 141218331,351218330,351218331
• This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 31114.00
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
• This screw (part number 31114
• Follow appropriate safety practices when installing screw 31114

Product description

This CRAFTSMAN V20 20V max* 7-1/4 in. Cordless sliding miter saw is powered by a powerful motor running at 3, 800 RPM designed for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease. The sliding 7-1/4 in. Blade allows for a cross cut capacity of up to 8 in. While the 9 Miter detents and single bevel blade allow for angled cuts. The lightweight design coming in at 21.8 lbs. Coupled with the side carry handles make this unit extremely portable. The LED light eliminates shadows and provides an accurate and easy Cut line to follow.

• Part of the V20 cordless system
• 7-1/4in. V20 20V max* miter saw has a powerful 3, 800 RPM motor for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease
• Slide capacity allows for 8 in. Cross cut at 90 degrees and 5.5 in. Cross cut at 45 degrees
• Capacity to cut 3-5/8 in. Nested Crown and 3-1/2 in. Baseboard vertically
• Lightweight design at 21.8 lbs. With side carry handles make this unit extremely portable
• 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	does this saw comes with a charger?? Thanks
Answer:	Yes, the CMCS714M1 comes with a charger.
Question:	I just bought a craftsman v20 cordless brad nailer kit, 18ga (cmcn618c1) the battery is compatible with this miter saw
Answer:	Yes
Question:	does this saw have a opional plug for a wall socket
Answer:	It is as described, CORDLESS! This means it takes a V20 Battery. It's a great saw especially for working with moldings using miter cuts. The battery lasts all day and then some. I would have an extra battery just in case.
Question:	How wide is the saw looking at it from the front
Answer:	21 "

Product description

Sears/Craftsman Dado Molding Insert 9-29995, For Use with 7-inch Diameter Dado Sets or 7-inch Diameter Molding Head: Insert No. 9-29995 Measures 14" Long (closer to 13-15/16" Opening is 6" X 1-5/16") and fits the following Craftsman 12-inch Table Saws: 113.29930, 113.299130, 113.299132, 113.29931, 113.24181 Includes Instruction/Safety Sheet Made in the U.S.A.

• Sears/Craftsman Dado/Molding Head Insert 9-29995

User questions & answers

Question:	Will it fit Model #315228390 if I don't' use the Rife knive
Answer:	Yes I'm pretty sure it will... I'm not exactly sure of my model number, but I have a 10" craftsman contractor style table saw that I bought new about 25 years ago and I don't have a Rife knife in mine. This dado insert works just fine.
Question:	Will this fit a Craftsman 113.241691 flex drive table saw
Answer:	Thank you for your interest. After doing some research we found that our item 9-29995 will not fit your model. The part you need is 62873 which we do not have on hand at this time. I wish we could have been more help.Respectfully,Nicki
Question:	I have 10" craftsman table saw model 113.298142. Insert dimensions are the same as your insert. Any reason it would not fit my saw with 6" dado blade
Answer:	Thank you for your interest. It appears our Insert will not fit your model according to SearsPartsCentral website. It shows that you bonded part# 62703 I wish we could have been more helpful. Respectfully, Nicki
Question:	Will it fit model 113298720 belt drive
Answer:	Don’t know. Mine is flex shaft. Be happy you have belt drive

• 【Powerful Motor】15A 2000W pure copper motor can generate 4800RPM cutting power to rip through various materials such as wood, hardboard, plywood, blockboard and chipboard
• 【45ºBevel Cutting】 Bevel tilt angle handle allows a left bevel cutting from 0-45°. Max cut depth is 2-4/5'' at 90°and 2'' at 45°. The table saw is equipped with 10'' 24T carbide-tipped blade for wood and compatible with most of the 10'' blades
• 【Aluminum Extension Tabletop】 Aluminum table surface features excellent antioxidant and anti-deformation, coated to reduce friction for more smooth sliding. The dimension of tabletop is 25.3''x 28.3'' and extension length is up to 3.9'' on both sides, providing more stability when cutting long wood
• 【Miter Gauge & Rip Fence】 Cross cutting requires the use of the miter gauge to position and guide the work. Miter angle can be adjusted from -45°to +45°according to your demand. Rip fence helps you make stable and accurate cuts, max rip capacity is 16.5 in.(42cm) in the left and 12.6 in.(32cm) in the right
• 【More Convenient Design】 On-board storage provides easy access to push stick and Allen wrench for extra convenience. Transparent blade guard ensures a clear vision and forbids careless touching hurt. 2-1/4" dust collection port can be connected with vacuum cleaner for more effective dust cleaning

User questions & answers

Question:	Where is this product manufactured
Answer:	It is made in China.
Question:	Now that you have had a chance to use the saw, would you buy it again
Answer:	It is cheaper than we thought. Also the stand that came with it didn’t fit the saw. Because we needed to use it we wired it on to an old saw stand. I guess you get what you pay for.
Question:	What are the square plastic things for? I dont see them in the instructions, and nd were just sitting in the box. Kind of looks like a holder for the
Answer:	The instructions are really not helpful at all. They do not match any of the parts labels stamped on the parts
Question:	Will blade included for this table saw
Answer:	Sorry, the blades will not included in the package.

Product features

TACKLIFE TABLE SAW 10-Inch 15A, 31 - 1/2'' RIP CAPACITY, 45ºBEVEL CUTTING, ALUMINUM EXTENSION TABLE

• 15A motor is more powerful compared with regular table saws, very suitable for cutting hardwood materials
• 31 - 1/2'' Rip capacity allow cutting a variety of large materials
• Aluminum table extendable on both sides, 25 -1/3'' x 28 -1/3'' aluminum table extends to 25 -1/3'' x 36 - 1/5''
• Max cut depth is 2-4/5'' at 90°and 2'' at 45°
• Miter Gauge & Rip Fence provide variety and more precise cutting
• Dust cleaning efficiently by connecting with aspirator that has 1-3/8-inch

Aluminum Extension Table

Aluminum table coated could reduce friction for more smooth sliding

The arms do extend to allow for a 3.9'' on both sides

About Rip Fence

31 - 1/2'' Rip capacity allow for cut large sheet materials to size

The blade can reach 4800 RPM

About Miter Gauge

Cross cutting requires the use of the miter gauge to position and guide the work

Miter angle can be adjusted from -45°to +45°according to your demand

About On-Board Storage

Provides easy access to push stick and Allen wrench for extra convenience.

A respect Management on your workbench

About Collection System

It features an excellent dust port and collection system

It minimize the amount of cleanup that you have to do

About Excellent Stability

Solid iron stand enhances stability.

Triangle support feet prevents table from tilting when cutting

Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

• ➤THE BEST GIFT FOR YOUR FAMILY AND FRIENDS & FASTEST DELIVERY BY AMAZON
• ➤POWERFUL MOTOR: Features a 15-Amp 2000W copper motor to deliver full-size performance at 4800RPM cutting power, cutting through various materials such as wood, hardboard, plywood, blockboard and chipboard. Extending the applications of the saw table.
• ➤FLEXIBLE 90° & 45° BEVEL CUTTING：Bevel tilt angle handle allows a left bevel cutting from 0-45° easily. Max cut depth is 2-4/5'' at 90°and 2'' at 45°.The 10'' 24T carbide-tipped blade is aligned with the riving knife well .
• ➤ALUMINUM EXTENSION TABLE:The dimension of flat tabletop is 25.3''x 28.3'', the extension length is up to 3.9'' on both sides providing more stability when cutting long wood . The specially coated aluminum table surface has excellent oxidation resistance and deformation resistance.
• ➤RIP FENCE&MITER GAUGE: The fence can be placed on both sides according to your need.Max rip capacity is 16.5 in.(42cm) in the left and 12.6 in.(32cm) in the right. Miter angle can be adjusted from -45°to +45°. Cross piece is molded aluminum ,which is durable and stable.
• ➤ MORE INTIMATE DESIGNThe :Transparent blade guard keeps visibility.The outside of the table saw comes with a wrench hook for easy operation. The 2-2-1/4" dust collection port can be connected with the vacuum cleaner to keep the table surface clean. Metal Stand provides good stability.

User questions & answers

Question:	The pdf for the user manual is invalid! And it's not listed in the description. What is the arbor size for this saw
Answer:	yes.
Question:	where can I buy a tackle saw blade with a 1-3/16" arbor 120 teeth
Answer:	Yes
Question:	Is blade replacable
Answer:	The table has a sliding fence that extends to 25" right of the blade
Question:	Is it compatible with dado blade
Answer:	Direct drive

Product description

For over 100 years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-6013 Portable 10 inch contractor table saw was designed with the professional in mind. Powered by a 15 amp motor it is maximized for precision, durability, and mobility. The heavy duty one piece rail system, along with the newly designed fence system allows for precision cuts every time. The fence incorporates a special design allowing you to cut narrow pieces of stock. The saw has a large 25 inch rip capacity 3-1/2 inch depth of cut at 90 degrees and 2-1/2 inch at 45 degrees. A 2. 5 inch dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.

• Powerful 15 Amp Contractor Grade motor easily handles treated lumber and hardwoods
• 25 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
• Heavy Duty Fence Construction with quick position tabs
• Professional Grade 5-Year

User questions & answers

Question:	dado blade compatible
Answer:	I would say yes but it’s an educated guess
Question:	Is there a base stand available for it
Answer:	I had to enlarge the opening a bit to install the new switch. The saw case is plastic and it's easy to modify the opening with a hacksaw - the kind with a small bayonet type handle for use in tight spaces. The plastic case is very easy to cut through. Got the switch installed and everything works just like it's supposed to.
Question:	Does this saw come with an extension
Answer:	Any time you are replacing a wired item, you should be removing one wire at a time from the old item and placing it on the new one. If you didn't think to do that, it's still not the end of the world. Looking at the switch from the backside, the black wires connect to the left side terminals and the white wires go to the right side. If you're still confused, here's a link to the wiring diagram: http://keyboard-keys.info/ryobi-table-saw-wiring-diagram
Question:	Is this belt drive or direct drive
Answer:	This switch has power for the main circuit and two side circuits. In the intended design they power the light and Lazer. If your tool is set up this way then it should work.

Product features

HUGE RIP CAPACITY

The Delta 36-6013 houses a powerful 15 amp motor and boosts an enormous 25 inch rip capacity. Its 559 square inch table surface and tube steel frame provides you the stability needs for those large cuts. This is an excellent saw for the Professional Flooring Contractor.

THE PRECISION YOU DEMAND

The Delta 36-6013 features a telescoping rails system make fence adjustments fast, smooth, and accurate. The rails utilize 3 quick adjustment tabs that allow you to quickly relocate the fence while ensuring the blade and fence are always parallel guaranteeing consistent and true cuts.