13 best ridgid compound miter saws

Product description

The RIDGID 15-Amp 12 in. Dual Bevel Sliding Miter Saw can handle any job thrown its way. It features an industry-leading 0-70-degree miter range with 70 degrees to the left and to the right. A dual-bevel design with crown molding stops enables you to move the saw head instead of the material for added convenience. It boasts a work light to improve the accuracy of the cut for precision and a 15-amp motor that easily handles the toughest of materials.

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Bought is less that a year light for blade cut is out where can get the replacement part
Answer:	You can’t use It’s not deep to 2 1/4
Question:	What is the widest board it can cut if it is laying flat
Answer:	Add a few drops of oil to where the air goes in every time you use it.
Question:	Is it made in USA
Answer:	I don’t think so this wrench is heavy! Work well
Question:	Do we get lifetime warranty on this product
Answer:	Max.Torque is 500FT-LB(680N-M). For safety, top performance and maximum durability of parts, operate this tool at 90 PSI; 6.3 bar max air pressure with 3/8" diameter air supply hose.

Product description

Includes 089028007017 Dust Guide Elbow. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid R4120 12" Compound Miter Saw

• Sold on Amazon

User questions & answers

Question:	What are tbe specific sizes of the id and od of this product
Answer:	Yes it does, along with a led light
Question:	Does this fit the ridgid r4120 miter saw
Answer:	Taiwan
Question:	Is this for the 2.5 inch dust port
Answer:	Cut Capacity at 90 (In.): 14 x 4 Cut Capacity at 45 Miter (In.): 14 x 2 (L), 14 x 1-3/8 (R) Cut Capacity at 45 Bevel (In.): 10 x 4 Cut Capacity at 45 Compound (In.): 10 x 2 (L), 10 x 1-3/8 (R)
Question:	Can you hook up a dust collector to it
Answer:	Yes

Product description

Includes 089028007011 Throat Plate. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid R4120 12" Compound Miter Saw

• Includes 089028007011 Throat Plate
• New, Bulk Packed
• Genuine Ridgid Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

User questions & answers

Question:	Will this fit ridgit miter saw ms1250lz
Answer:	Thin steel you can cut but have to have the correct blade that is make to cut steel.

Product description

Includes 089028007011 Throat Plates. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid R4120 12" Compound Miter Saw

• Sold on Amazon

User questions & answers

Question:	what are the dimensions of the plate
Answer:	Arbor size is standard 5/8"

Product description

Compatible with: R41221

• Genuine, OEM Ridgid Replacement Part
• Ridgid replacement dust bag, part number 89041033158
• Compatible with: R41221

User questions & answers

Question:	Will this bag fit a ridgid model msl290lz miter saw
Answer:	Try the Ridgid web site.
Question:	Does this bag include the plastic frame thats located inside the origional
Answer:	At 90 deg. You can cut a 2" x 12" board. It is in the description if you look it up.
Question:	what is the size of the ring/opening? 2/5 inches? smaller
Answer:	No. It's made in China.
Question:	Will this fit a 12" craftsman miter saw with a 1-5/8" dia opening
Answer:	If I understand correctly, the warranties good for two years and after that if you've registered the product within 30 days after you purchase it you get a lifetime limited warranty. I know the two year warranty is a basic warranty that covers basic parts in the event of failure not sure what the limited lifetime warranty covers. When my Ridgid saw nearly exploded I took it to Home Depot and they replace nearly the entire thing all under warranty and Richard's warranty folks are painless and friendly.

Product description

Brand New Genuine Ridgid 089028007011 Throat Plate Fits R4120 12" Miter Saw OEM... Genuine Ridgid Part # 089028007011 Genuine OEM Ridgid Part

• Sold on Amazon

User questions & answers

Question:	Does this item fit ridgid ms1290lsa 12" mitre saw part
Answer:	Stamped
Question:	Does this fit the saw with the number E48467 on the motor housing
Answer:	Yes. With ease

Product description

Includes 089028007140 Dust Bags. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid R4120 12" Compound Miter Saw

• Genuine, OEM Ridgid Replacement Part
• Ridgid replacement dust bag, part number 89028007140
• Compatible with: R4120

Product description

Includes (10) 089028007011 Throat Plates. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid R4120 12" Compound Miter Saw

• Includes (10) 089028007011 Throat Plates
• New, Bulk Packed
• Genuine Ridgid Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

Product description

Ridgid makes setting up on the job site easy with the Miter Saw Utility Vehicle that offers a quick release extension lock making repositioning extensions incredibly fast and easy. It achieves ultimate user comfort with a lightweight design, weighing in at only 57lbs and featuring a carrying capacity of 400lbs. Plus, there's no need to worry about sliding or compound miter saw compatibility as the improved Ridgid MSUV has a universal quick release mounting bracket design that's compatible with all sliding and compound miter saws. And the secondary lock helps to ensure a secure fit!

User questions & answers

Question:	I bought the AC9946 & was wondering if anybody had a parts issue like me? The black frame bolts they included are too short to get the nut on
Answer:	Saw side od is 2 1/4 in and Id is 2 in The dust collector side od 2 1/2 in and Id is 2 1/4 In
Question:	Is it painted steel or aluminum
Answer:	Yes but it sucks. Bag is always in way when you cut beveled or you just cut a 12" s. Horrible set up
Question:	What is the maximum measurements of the saw mount brackets mounting slots? I need 14.5" X 24.5" but don't won't to put on plywood
Answer:	Yes, its transition between saw dust port and dust bag.
Question:	What is the footprint of this stand in it's folded position
Answer:	Yes, you hook a dust bag

Product description

The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

• Power and durability: 15 amp, 4,000 Rpm motor
• Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
• Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
• Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Ridgid 089036008914 10" Miter Saw Replacement Dust Bag

This part is compatible with the following machines:

Ridgid

R4112 10-In. Miter Saw

• Genuine, OEM Ridgid Replacement Part
• Ridgid replacement dust bag assembly, part number 89036008914
• Compatible with: R4112, R41121

User questions & answers

Question:	Will this fit Rigid 10" R
Answer:	No
Question:	Will this work with the tube size on my saw being
Answer:	The dust bag I purchased did not have a plastic liner. There is a wire frame to hold the bag horizontally
Question:	will this fit delta mitre saw
Answer:	2.5"
Question:	How big is the opening
Answer:	the Rigid ring is 2.25... I had to rig mine (1.5" opening) with a piece of 2" PVC I bored out with a hole saw.... I think that should be part of description would have saved some time

• 🔥Ideal gift for your family & professional work
• 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
• 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
• 🎅Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.
• 🎅Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.

Product features

TACKLIFE Advanced 10-Inch 15-Amp Multifunctional Sliding Miter Saw-EMS01A

- Uses: can be widely applied to various materials like wood, MDF, chipboard, plywood, blockboard, hardboard, wood with nails, 3 mm mild steel plates and more.

- If you have the demand to change the blade, calibrate the bevel angle and know more about operating instrument

Please refer to the video guide below.

Extensible Table

Extended platform on both sides adds the stability when cutting the long material. Vice clamping system helps to fix the object.

Laser Guide

Red laser guidance illuminates the cutting line, and add the accuracy when you operate in dim environment.

Portable Tool

Weigh only 31.5 pounds, it can be carried around the job-site effortlessly with the help of built-in portable handle.

Dual speed adjustment for versatile uses

Dual speed adjustment for multiple applications - The speed can be adjusted to meet different cutting requirements. - Speed 1(3200 RPM): Ideal for soft aluminum, soft steel and more. - Speed 2(4500 RPM): Ideal for wood, plastic, plywood and more. - Now experience the cutting-edge design.

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.