11 best kobalt 12 miter saw

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

Specification

- Diameter: 12"(305mm)

- Teeth: 80-Tooth ATB

- RPM: up to 5000

- Arbor: 1 Inch

From the Manufacturer

TOMAX is a fully integrated enterprise, incorporating technology, research and development, manufacturing and marketing functions. We have over 10 years production experience in circular saw blades, abrasives and diamond tools.

• Ideal for cutting all types of wood
• Construction grade carbide teeth provide maximum resistance for longer life
• Electrophoretic Coating reduces the rusting and corrosion
• For use with miter or table saws
• Quality Guarantee, Limited Lifetime Warranty by TOMAX

User questions & answers

Question:	Does the blade make a flat cut like a rip blade or is it angled
Answer:	flat and square, works great
Question:	To cut engineered bamboo flooring do you recommend an 80 or 100 tooth blade
Answer:	yes, it comes with adjustment wrenches, wheel mandrels and other accessories.
Question:	Do i need a 100t or 80t for 4x4s. pallets boards etc on a compound miter saw? thank you
Answer:	So there is no water supply attached, we purchased a container and added a hose and it works great.
Question:	Does the blade make a flat cut or is it angled
Answer:	No we added and just put a hose attached to bottom hole and extended so it would go outside.

Product features

TOMAX Wood Cutting Saw

Diameter: 12"(305mm)

Teeth: 80-Tooth ATB

RPM: up to 5000

Arbor: 1 Inch

TOMAX is a fully integrated enterprise, incorporating technology, research and development, manufacturing and marketing functions. We have over 10 years production experience in circular saw blades, abrasives and diamond tools

Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish

Super Material

TOMAX saw blades are carefully crafted using the best materials, the most innovative designs, and the industry's most sophisticated manufacturing processes. Every blade is specifically designed for superior performance and maximum life.

Specifical Design

Carbide size is extremely important when it comes to sharpness as well as the rate at which an edge wears. The larger the carbide grain, the faster an edge will wear. Select the TOMAX blade for your application from a wide variety of designs and sizes.

Less Noise

Laser-cut anti-vibration Technology reduces noise and extends cutting life, Laser Cut steel blade body for smoother cuts and flatness, and Non-stick Perma-Shield Coating that reduces gumming, rusting, and corrosion for longer life with less wear.

About TOMAX

TOMAX is a fully integrated enterprise, incorporating technology, research and development, manufacturing and marketing functions. We have over 10 years production experience in circular saw blades, abrasives and diamond tools.

• Real industry quality level with elegant and simple design, C4 construction grade tungsten carbide teeth provide maximum resistance for 3X longer life
• Ideal for ripping & crosscutiing in softwood, hardwood, chip board and plywood with fine finishing
• For use on Miter Saws and Table Saws, Max RPM 5,000
• 2.5mm thin kerf design for fast cut and smooth cutting action allows extremely durable with minimal material waste
• Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp

User questions & answers

Question:	I need to cut rough 1/4 plywood. Will this do a smooth job? Buying for a ryobi table saw
Answer:	No. It is a ATB grind. But cuts fairly fast and smooth.
Question:	Does this blade cleanly cut plastic
Answer:	It can I have used this blade in a mitersaw and a table saw to rip.
Question:	Will this blade fot a model 5400 skilsaw
Answer:	I use a 100 tooth. The fine blade works best, in my opinion.
Question:	Is this a flat tooth blade
Answer:	The 80t is a finish blade, I use it with hard woods and trim/molding. I use a 40t for 4x4 and 4x6 and soft wood studs and treated lumber. I use 100t for 1/8 to 1/2" plywood.

Product features

Specification - Diameter: 12"(305mm) - Teeth: 60-Tooth ATB - RPM: up to 5000 - Arbor: 1 Inch

Product description

Includes: 40 tooth carbide tipped saw blade, blade wrench, dust bag, safety clamp, retractable die-cast aluminum extensions, manual.

• Maximum crosscut up to 2 in x 8 in (nominal) at 90 degrees and 2 in x 6 in at 45, idea for molding and framing cuts
• Lightweight (under 23 lbs) for easy transport from storage to work location
• Miter cuts up to 50 degrees left and right with 9 positive stops at the most used degrees. Tool-less adjustable upfront mounted laser guide system projects accurate pre-cutting line for precise alignment. Tall, die-cast aluminum fence gives support during setup and cutting
• Powerful 10.0 Amp ball bearing motor, delivers up to 5,000 RPM for accurate cuts. Large, die-cast aluminum base and table for increased work support
• Bevel cutting up to 47 degrees to the left, positive stops at 0 and 45 degrees. Dual slide rail system with linear bearings allows for smooth and accurate operation

User questions & answers

Question:	Will it cut a 1x
Answer:	I think you have to ask
Question:	Is it battery operated
Answer:	That’s odd. We purchased two packs and they’ve been great. I’m not sure what the issue is. Amazon should take them back. Maybe switch to another torch?
Question:	What's the tallest cut it can take? Will it cut a 4x
Answer:	You fill this lighter with butane. Turn the lighter upside down. You will need to "burp" the lighter. Push the pin in on the bottom of the lighter. You will hear the air come out. The when you fill the lighter, it will fill much easier.
Question:	Will this cut a 4X
Answer:	They come full

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

• 10" Compound Miter Saw
• MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
• LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
• MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
• BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
• LARGE TABLE: Offers better material support with vice clamping system to secure work piece
• THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

User questions & answers

Question:	Does this take any 10” blade
Answer:	Yes, it will take any 10" blade with a 5/8" arbor.
Question:	does this come ready to use or is assembly required
Answer:	Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps!
Question:	Is the depth of cut adjustable
Answer:	Depth can't be adjusted on this model number. You will need a sliding compound miter saw.
Question:	According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too
Answer:	Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one.

Product features

45 Degree Bevel Range

To the left to provide clean and accurate bevel cuts

Horizontal handle

For a secure hold

15 Amp motor

Delivers high power for the toughest cutting jobs

Large table

for better material support with vice clamping system to secure work piece

Product description

Remember when your Miter saw could do it all? Create cuts at any angle with the WEN 10-inch single bevel sliding compound Miter saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive Miter stops: Two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, The Miter Lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-Tooth carbide-tipped blade (W/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust Collection port allows for connection to either the included dust bag or your dust Collection device of choice. And, because it’s a WEN product, your Miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick
• Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left
• Onboard Class II laser guide illuminates your line of cut
• Features a 7-1/2-inch Crown molding nested capacity and a 6-3/4-inch base board vertical capacity
• Includes a 10-inch 40-Tooth carbide-tipped blade, Two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

User questions & answers

Question:	Cut steel
Answer:	Thin steel you can cut but have to have the correct blade that is make to cut steel.
Question:	What size is the arbor
Answer:	Arbor size is standard 5/8"
Question:	Are the indents on the miter gauge tape or stamped
Answer:	Stamped
Question:	Will this saw cut a 4x4 piece of lumber
Answer:	Yes. With ease

Product description

Introducing the Deluxe Portable Miter Saw Stand by POWERTEC. This heavy duty workstation was designed to provide you with seamless and mobile integration with your miter saws and bench-top tools. From the compact size, to the high quality construction, and onto any of the many unique features this miter saw stand was made for optimal convenience for every professional contractor or DIY enthusiast. Heavy Duty Construction – Made with industrial strength round steel tubing for durability, and flaunts a 330 lbs maximum weight capacity to support your benchtop power-tools. Built-In 110V Power Outlet – Eliminates the inconvenience of having to place your bench top power tools in a location near a power supply. Spring-Loaded Locking Legs – Allows you to quickly set up or collapse the foldable miter saw stand, without complicated or lengthy instructions. Rolling Mobility – Equipped with eight-inch super grip rubber wheels that deliver optimal traction that won’t bog down into the soil. Compact Portability – Possesses a manageable 40lb weight and foldable design that allows you to efficiently store this cost effective unit at home or take it with you on the road. Universal Compatibility – Utilizing quick release adjustable mounting brackets, our miter saw stand accepts most 10” and 12” miter saws from all of the major brands. Additional Product Specs• Height: 31-7/8"• Width (extended): 79-1/4"• Outlet Input Voltage: 125V AC• Input Ampere: 15 Amps• Net Weight: 40 lbs. (18 kg) POWERTEC MT4000 can safely be stored, with or without a saw attached, in the horizontal position. A foot or bracket is not provided that would allow for vertical storage. However, with the saw removed, the stand can be stored vertically if supported or lashed.

• INCLUDES: Portable Miter Saw/ Planer Table
• FUNCTION: A hassle-free and practical workstation stand for miter saws, planers, chop saws and other bench top-tools
• FEATURES: Portable design with super-grip 8-inch rubber wheels, spring-loaded locking legs for easy set-up and break down, universal quick-release mounting brackets that work with most miter saw
• SELF POWER SUPPLY: Flaunts a convenient 110V 3-3 prong power strip along the lower base to eliminate the need of a nearby outlet for your power tools
• PREMIUM BUILD: Miter saw work station is made with high quality round steel tubing for superior industrial strength that supports a 330 lbs maximum weight capacity

User questions & answers

Question:	My miter saws leg bolts are 14.5 inches apart. Anyone know if my saw will work
Answer:	David L. Miller answered correctly. The slots on the arm accepts a 15 inch span. So measure the distance between the bolt holes from front to back on your saw and make sure they are 15" or smaller and you're good. I have used this stand extensively this year. Its well worth the money. Very sturdy.
Question:	I have a Makita 12 inch slide. Will this stand fit my saw
Answer:	It should there is a lot of adjustment on the clamp bars that bolt to the saw.
Question:	Will my Dewalt 10" and 12" miter saws work with the supplied adapters
Answer:	Yes it seems to fit just fine with my 10" Dewalt Miter that I have. I would guess the 12" would be fine as well.
Question:	What is the approximate width inside curve to inside curve of the clamping area? Ie. what width of stand will these clamps work on
Answer:	12" with adjustable clamp to 1". I use 3 different portahorse stands Black and Decker is a great stand for these clamps also Home Depot brand fold and travel, Menards also sells their own brand also I made my own stand for my work station. These clamps are great the handles on the sides make portability a major plus, they are a great value. I had purchased 4 sets to fit on my equipment.

Product features

The Deluxe Portable Miter Saw Stand by POWERTEC

This heavy duty workstation was designed to provide you with seamless and mobile integration with your miter saws and bench-top tools. From the compact size, to the high quality construction, and onto any of the many unique features this miter saw stand was made for optimal convenience for every professional contractor or DIY enthusiast.

Heavy Duty Construction

Made with industrial strength round steel tubing for durability, and flaunts a 330 lbs maximum weight capacity to support your benchtop power-tools.

Utilizing quick release adjustable mounting brackets, our miter saw stand accepts most 10” and 12” miter saws from all of the major brands.

Universal Compatibility

Possesses a manageable 40lb weight and foldable design that allows you to efficiently store this cost effective unit at home or take it with you on the road.

POWERTEC MT4000 can safely be stored, with or without a saw attached, in the horizontal position. A foot or bracket is not provided that would allow for vertical storage. However, with the saw removed, the stand can be stored vertically if supported or lashed.

Built-In 110V Power Outlet

Eliminates the inconvenience of having to place your bench top power tools in a location near a power supply.

Input Voltage: 125V AC

Input Ampere: 15 Amps

Spring-Loaded Locking Legs

Allows you to quickly set up or collapse the foldable miter saw stand, without complicated or lengthy instructions.

Rolling Mobility

Equipped with eight-inch super grip rubber wheels that deliver optimal traction that won’t bog down into the soil.

• 🔥Ideal gift for your family & professional work
• 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
• 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
• 🎅Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.
• 🎅Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.

Product features

TACKLIFE Advanced 10-Inch 15-Amp Multifunctional Sliding Miter Saw-EMS01A

- Uses: can be widely applied to various materials like wood, MDF, chipboard, plywood, blockboard, hardboard, wood with nails, 3 mm mild steel plates and more.

- If you have the demand to change the blade, calibrate the bevel angle and know more about operating instrument

Please refer to the video guide below.

Extensible Table

Extended platform on both sides adds the stability when cutting the long material. Vice clamping system helps to fix the object.

Laser Guide

Red laser guidance illuminates the cutting line, and add the accuracy when you operate in dim environment.

Portable Tool

Weigh only 31.5 pounds, it can be carried around the job-site effortlessly with the help of built-in portable handle.

Dual speed adjustment for versatile uses

Dual speed adjustment for multiple applications - The speed can be adjusted to meet different cutting requirements. - Speed 1(3200 RPM): Ideal for soft aluminum, soft steel and more. - Speed 2(4500 RPM): Ideal for wood, plastic, plywood and more. - Now experience the cutting-edge design.

Product description

The 10 In. Sliding Compound Dual Bevel Miter Saw with Laser Marker System - C10FSHCT is designed to deliver a professional finish. The C10FSHCT is lightweight (40.7 lbs.) and equipped with the new simple and compact slide structure. This slide system decreases the footprint of the saw by up to a foot, enabling the saw to sit nearly flush against a wall or on a bench without compromising the range of movement. For this reason, the C10FSHCT miter saw is a great miter saw for small shops and tight garages. The saw is equipped with an LED light to give the user more visibility and a safer work environment in low light situations. This saw does not include soft start

• INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench
• POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease
• BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place
• MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility
• COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance
• LASER MARKER SYSTEM: Marker system increases cutting accuracy
• LIGHTWEIGHT: Only 40.7 lbs makes for easy transport to the jobsite

User questions & answers

Question:	Is the laser battery powered
Answer:	Wondering about height limits. I will have an overhead over the bench. What is the distance from bench top to the top of the handle when the saw is in the fully up position?
Question:	Can this hang upside down in a flip-to cart and not damage the saw
Answer:	Thank you for your question. The height of CM10DG from the base to the table is 3 3/4" and 27" in width and 32" from front to back. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	How long is the power cord
Answer:	The base of the saw is 26"x16" (wide by deep) and therefore would hangover - would not recommend. Also, the base is not solid, only three inches on each end are are solid where the base rests. Finally the saw itself is approximately 32" deep. Again, I think it would be unstable to put on a 24" cart.
Question:	What is the maximum width of cut for a 1”” thick board
Answer:	Expanded cutting capacity: 12 In. horizontal capacity (nominal); 5-1/2 in. vertical capacity against the fence (base); 6 in. crown capacity against the fence (45° spring). Also, you can find cutting instructions in the manual starting on page 33. Here is a link to the manual:http://mdm.boschwebservices.com/files/r51484v2.pdf

Product features

Zero Rear Clearance Slide System

Allows the saw head to slide along fixed rails for effortless and smooth movement, while easily fitting on a benchtop without compromising the range of motion

Equipped with LED Light

For added visibility and a safer work environment in low light situations

Ergonomic Upfront Bevel Lock

For quick and easy adjustments of the bevel angles without having to reach around to the back of the saw

Tool-less Laser Marker

For cutting accuracy that can be easily adjusted to the users preference

Product description

DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2x4 Pine - or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2x8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

• Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility. Capacity to cup 3 5/8in nested crown and 3 1/2 base vertically
• Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy
• Compact, lightweight design (30 lbs.) allows for easy transport and storage
• Cam lock miter handle delivers quick and accurate miter angles
• Precise miter system and machined base fence support optimize durability and cutting accuracy
• Battery & Charger Sold Separately

User questions & answers

Question:	How well was this product packaged? Did anyone experience damage during shipping? I don't usually buy heavy items like this on-line. Thanks
Answer:	The saw was sufficiently packaged to protect it during shipping. I got mine in perfect condition. The manufacturer's packaging took care of most of the protection, and I'm pretty sure it was over-boxed as well. Hope this helps, and enjoy the saw. I haven't had a ton of use from mine yet, but have done several smaller projects with just a few cuts and have been pleased with the performance (it's not a cheap toy) and ease of handling. The size and weight make it easy to get it out and start cutting, then put away quickly when the job is done.
Question:	What is the difference between the dcs361b and the dcs361m
Answer:	The M1 is the European version
Question:	I see the vertical max is 3 5/8, but could this cut 4x4 lumber
Answer:	No not with one cut. You would have to turn the 4x4 over. Blade is a 7 1/4" diameter, same as a hand held circular saw. From the tip of the teeth to the edge of the washer (at center of blade) I get 2 7/8".
Question:	What's the cross cut capacity if we use the entire sliding action
Answer:	On a straight 90, I can cut 8" wide boards. On a 45, I can cut right around 5-7/8". This saw was a great addition for me, as I'm constantly working in places away from a simple power source (my generator is a beast and not easy to transport). It cuts cleanly, hasn't bogged down yet (even on wet 2x6 treated), and is super light and easy to transport.