14 best baseboard heaters

Product description

High-impact Lexan end panels with built-in handles. Built-in thermostat with power light with an attractive chimney fin element design. Its 100% energy efficient with 120V operationIts made in USA Its best suited for dens,bedrooms and basements.

• High-impact Lexan end panels with built-in handles
• Built-in thermostat with power light with an attractive chimney fin element design
• Its 100% energy efficient with 120V operationIts made in USA Its best suited for dens,bedrooms and basements

User questions & answers

Question:	Dual Wattage, does that mean it can be hard wired
Answer:	No, this unit was not designed to be hard wired. It has a suitable electrical cord with a plug on it, intended to be plugged into a 20 amp wall outlet. Dual wattage means it has a high and a low heat output, which is controlled by a switch that comes on the unit.
Question:	Is there any sort of safety screen for this? I'd be concerned about small things falling into it, or children pushing small toys into it
Answer:	There is no safety screen at all on this heater. You may be able to attach a heat resistant mesh on the outside of the heater for little hands/small things not to find their way into the heater. The heating element does sit way back and inferiorly on the heater but without the screen it is pretty easy for curious hands to find their way into it. Hope this helps.
Question:	Is this on oil filled heater
Answer:	No. It's a convection resistor with fins.
Question:	I just purchased and set up and indeed the smell is awful. For those who stuck it out, how long until the smell dissipates
Answer:	It's been a while since I purchased mine, but I left it on for a couple of hours in my garage before I started using it, and there's no smell at all when I use it now.

Product description

Cadet Manufacturing 05532 White Baseboard Hardwire Electric Zone Heater 120V, 750W, 6.25A, 36" requires a thermostat. 25 gauge steel, 20 gauge junction box with ground, all metal, powder coated. UL listed.

• Requires A Thermostat
• 25 Gauge Steel
• 20 Gauge Junction Box With Ground, All Metal, And Powder Coated
• UL Listed Heater
• Requires A Thermostat
• 25 Gauge Steel
• 20 Gauge Junction Box With Ground, All Metal and Powder Coated
• UL Listed Heater

User questions & answers

Question:	I returned you product to a local Kohls and i received an email today that the product was never received. Can you give me some info on this please
Answer:	This is a link from Home Depot I used when I purchased mine. https://www.homedepot.com/catalog/pdfImages/0c/0c48b303-97be-48ec-82b6-ff341b740842.pdf excellent heater. I love it
Question:	What size room with minimal insulation will this heat
Answer:	You may use an extension cord that is designed to handle 15 amps. This cord can pull up to 12 amps. A good appliance style, one outlet 3 prong 12 gauge cord will handle this. Do not plug anything else into this cord. Always use the shortest length extension cord possible. IE Don't use a 25' extension cord for this 8 foot run. A six foot 12 g. 3 prong would be all that is needed.
Question:	do all the cadet thermostat come with a wiring diagram
Answer:	my experience is a 300 to 500 sq ft. but it also depends on how high the ceilings are. This is great heater, but dont expect it to be quick heating. Takes about 15 minutes for the room to heat up.
Question:	Does this unit have any sort of control? thermostat? on-off switch? high-low control
Answer:	there is a control, you can set so that it keeps the area heated but it 1000w all the time turn it down it comes on less.

Product features

36" Electric Baseboard, White

• Practical design is ideal for new construction and built to last
• Easy installation with pre-punched knockouts at 1-inch intervals
• Universal wiring available at either end
• Proven construction helps maximize surface area and funnel heated air
• Place under a window for best results
• Rest easy—includes high-temperature safety shutoff feature
• Durable, powder-coated finish stands up to nicks and scratches
• Proudly made in the USA

Product description

Cadet Manufacturing 09954 White Baseboard Hardwire Electric Zone Heater 240V, 1000W, 48" requires a thermostat. 25 gauge steel. 20 gauge junction box with ground, all metal and powder coated. UL listed.

User questions & answers

Question:	Can i wire 2 or 3 of them together an what size breaker
Answer:	When the A is ON the thermostat is controlling heat. Use + or - to set desired temp. When the A is OFF, the heater is simply on and heating away. If it's in a small room (10x10 say) it can easily heat that space to 90 degrees. So use the thermostat.
Question:	Does this require a single pole or double pole t-stat
Answer:	It's completely dark. No glowing. The only light emitted is from a digital display.
Question:	Anyone aware of the energy efficiency of this heater
Answer:	the 5622 is white, the 5620 is grey and the 5624 is black. I can't seem to find any other differences. You can check it out for yourself here: http://www.laskoproducts.com/low-profile-heaters/
Question:	getting this for a 4 season porch. I need a separate thermostat. Will this work with the Nest thermostat
Answer:	It's not going right to 77.... it's saying that the temperature in the room is 77. The digital display will always read the current temperature in the room, so if you're setting it to keep the room at 73, then it won't come on if it's already 77. If you're not warm enough, then you'll have to set it higher than what the thermometer on the heater is reading.

Product description

Stiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 208-240 VoltsStiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 208-240 Volts is ideal for bathrooms, kitchens, hallways, and any location where quick heat is needed. They feature surface-mount design with quick, easy installation, and can be installed over existing outdated heaters. They have a unique design that enhances decor. The compact design fits almost anywhere, and the downdraft design eliminates cold floors. The features also include quiet operation, built in thermostat, and quality construction. The Stiebel Eltron CK 20E electric wall mounted heater is a sleek alternative to conventional electric space or recessed heaters and provides quick heat in just about any location. It can be mounted anywhere in the house and has a new design to effectively and efficiently disburse heat throughout the general area. At 240 volts it produces 2000 watts of heat with a fan to help improve heat transfer. Stiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 208 Volts Specifications: 208 Volt 7.2 Amps 1.5 KW 15 Amp circuit breaker 14 AWG in. supply wire gauge Heating element: Nichrome Wire Thermostat: Bimetal type High limit: Bimetal type Motor: 18 Watt shaded pole Blower: Galvanized steel, squirrel cage type Height x Width x Depth: 18 1/8" x 13 1/4" x 4 3/4"; 460mm x 335mm x 123mm Housing: Painted steel/plastic Model: CK20E Stiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 240 Volts Specifications: 240 Volt 7.5 Amps 2.0 kW 15 Amp circuit breaker 14 AWG in. supply wire gauge Heating element: Nichrome Wire Thermostat: Bimetal type High limit: Bimetal type Motor: 18 Watt shaded pole Blower: Galvanized steel, squirrel cage type Height x Width x Depth: 18 1/8" x 13 1/4" x 4 3/4"; 460mm x 335mm x 123mm Model: CK20E Housing: Painted steel/plastic

From the Manufacturer

Stiebel Eltron CK 20E Wall Mounted Electric Fan Heater-240V/2000 watts offers and exciting room heating alternative for new construction and renovation projects. This unit is an ideal replacement for recess-mount heaters.

• Surface mount design
• Quality construction
• Quiet operation
• Built in thermostat for maximum comfort
• Reliable performance

User questions & answers

Question:	Can this be mounted high instead of low on the wall? Would higher be a safety issue? I need a heater for my toddler's room that he cannot get to
Answer:	Yes, the model H4810 is BPA free. If you need additional assistance, please contact [email protected] or call 1-866-603-5900
Question:	How much airflow is there? i cannot find a cfm rating.... help
Answer:	Yes, you can see through the tank to see where the water level is. If further assistance is needed please contact us at [email protected] or at 866-603-5900 X213 M-F 8:30-4:30 EST.
Question:	what is the maximum room size for one unit
Answer:	You can change the mist output to low, medium or high. This unit does not offer the capability to set a certain percentage. If further assistance is needed please contact us at [email protected] or at 866-603-5900 X213 M-F 8:30-4:30 EST.
Question:	I have an old (and utterly useless) 220v baseboard I was thinking of replacing with this. What is the advantage of 220v over
Answer:	In winter of January 2018 we used only Distilled Water and had NO WHITE DUST PROBLEM. In winter of Dec. 2018 to Mar. 2019, we used only Tap Water and had a white film appear on every vinyl surface and shelf surface in the two Bedroom apartment - even on vinyl CD cases inside a binder.

Product features

Made in Germany

All CK heaters are made by us in our factory in Germany. We pride ourselves on a reputation for engineering & manufacturing excellence since 1924.

Ultra quiet fan

CK and CKT heaters have galvanized steel, squirrel cage type blowers that operate at a quiet 49.7 dB(a). The glass-reinforced poly-carbonate, radial type blower in CK Trend heaters operates at an even quieter 49 dB(a).

Even-heating down-draft design

CK and CKT heaters pull in cool room air from the top and blow warm air out the bottom. This down-draft design helps to evenly heat a space for maximum comfort.

Stand-alone or supplemental heat

CK heaters can be the sole heat source for small rooms. They can also supplement heat to a room that doesn’t get warm enough from a central source, as sometimes happens with a mini-split retrofit.

Built-in thermostat

All CK heaters have an integral thermostat for easy heat adjustment. CK and CKT heaters can be controlled by a wall thermostat in a room larger than 215 sq. ft.

Booster timer on CKT

The CKT booster timer outputs heat at maximum for up to 60 minutes. When the timer goes off, the CKT reverts to its thermostat setting, maintaining comfort at the original setting.

Frost protection setting

CK heaters have a frost protection setting. The lowest thermostat setting will maintain above freezing temperatures in an appropriately sized space.

CK Trend On/Off Switch

The CK Trend’s convenient and positive on/off switch completely shuts the heater off when it is not needed. The off position will disable the frost protection setting.

Installation notes

These heaters are not supplied with a cord and must be hard-wired.

CK and CKT models stick out 5“ from the wall and the CK Trend models 5⅛”.

Because these are fan heaters that blow warm air out the bottom, the recommended installation location is about 6-8” off floor, with 4” for a minimum.

All CK heaters should be mounted vertically.

Observe all installation manual precautions regarding minimum allowed clearances between the installed appliance and any hard surfaces.

Do not allow combustible materials on or near the heater.

Product description

Power 1500 Watt Heater - There's plenty of power in this digital baseboard heater thanks to its 1500 Watts, so you can rest assured that you'll warm up in no time. The convection heater features two heat settings and a digital adjustable thermostat with temperature display, so you'll have the level of control you need for the precise temperature you want.



Silent Operation in a Stylish Design - The electric baseboard heater delivers silent operation to ensure that no one is disturbed. Read a book, watch TV or chat without being distracted by irritating background noise. The low-profile black heater features dent-proof end panels for durability, so the unit will look stylish for years to come.



Safety First - An advanced safety system provides added peace of mind, especially if you have pets or children in the home. The system includes a safety tip-over switch that cuts power if your heater is accidentally knocked over, a stay-cool body and an overheat protection sensor that prevents it from getting too hot.



Reduces Heating Costs - If you're looking for a way to save on home heating bills, look no further than this electric baseboard heater with thermostat. It allows you to keep the room you're in at a warm and comfortable level while lowering the heat in the rest of your home, particularly in unused areas.

• PLENTY OF POWER: Ideal for medium-sized rooms, this 1500-watt convection heater features 2 heat settings and a digital adjustable thermostat with temperature display.
• SILENT OPERATION: This electric baseboard heater operates quietly to ensure that room occupants aren't disturbed. Keep your TV or music at a reasonable level and enjoy normal conversation without distracting noise.
• ADVANCED SAFETY: Features an advanced safety system that includes a safety tip-over switch, stay-cool body and overheat protection sensor.
• DENT-PROOF ENDS: The end panels on this sleek, low-profile convection baseboard heater are dent-proof, so it won't start to look beat up with regular use.
• HELPS LOWER HOME HEATING COSTS: An electric baseboard heater with thermostat helps lower home heating costs by providing targeted heat in the room you're in rather than your whole house.

User questions & answers

Question:	Digital" usually means that the devise will not automatically restart or resume after a power 'blink' or outage. Is that the case with this heater
Answer:	Yes
Question:	What are the dimensions
Answer:	The dimensions on this heater are Length‐29.25"xWidth‐5.31"xHeight‐9.13".
Question:	how do I set the thermostat
Answer:	You are correct, it is not as easy as it should be. Use the menu botton until you can use the up and down arrows to adjust the temperature. Not sure if the user manual explains this or not, but it could be a good source. Manufacturer web site might have manual for download. Regards, Dr. Greg Holte
Question:	Standing right next to it, is there an electrical hum when on? Or is it truely and totally silent (except for the popping sounds as it heats up
Answer:	There may be a slight hum to the heater when it is running. I would consider this part of the normal operation, just like the popping you mentioned.

Product description

' Electric Baseboard Heater, Conventional, Residential, Voltage 240/208, 1 Phase, BtuH Output 6824/5118, Mounting Type Wall, Length 96 In., Depth 2-1/4 In., Height 6-3/4 In., 60 Hz, 2000/1500 Watts, 8.33/7.21 Amps AC, Color White, Finish Powder Coat, Housing Material Steel, Standards UL '

• Price For: Each Housing Style: Conventional Standards: UL Hz: 60 Finish: Powder Coated Mounting Type: Wall Item: Electric Baseboard Heater Height: 6-3/4" Housing Material: Steel Color: White Phase: 1 Primary Application: Residential Depth: 2-1/2" Length: 96" Amps AC: 7.21/8.33 BtuH Output: 5118 / 6824 Watts: 1500/2000 Voltage: 208/240
• Country of Origin (subject to change): United States

User questions & answers

Question:	is there a temperature control on the unit or does it require a separate thermostat
Answer:	You need to purchase a thermostat regardless...on the unit or on the wall
Question:	How many sq ft does this cover
Answer:	I have two units in a combination living room, kitchen and dining area and it’s toasty.
Question:	Are these heaters energy efficient
Answer:	Not terribly but we were operating on 100 per cent electric heaters as we are having to replace our wood burner which these heaters were doing 100 per cent of the heating this past winter in Michigan.
Question:	How many square feet with this heat? I have a 500 square foot room, will I need one or two of these to keep it toasty
Answer:	I would suggest two.
Question:	I returned you product to a local Kohls and i received an email today that the product was never received. Can you give me some info on this please
Answer:	Don't waste your money.
Question:	What size room with minimal insulation will this heat
Answer:	If it is a room with a door and not opened to other rooms it will heat about a 10' x 10' room.
Question:	do all the cadet thermostat come with a wiring diagram
Answer:	Your question says "thermostat" but this unit does not come with a thermostat. It does have a wiring diagram and is very easy to install but you do need a separate baseboard thermostat to control this.
Question:	Does this unit have any sort of control? thermostat? on-off switch? high-low control
Answer:	This unit does not come with a thermostat, however the thermostat would be used as an on/off switch as well as a temperature control. The unit does have a high-temperature safety shutoff feature.

Product features

36" Electric Baseboard, White

• Practical design is ideal for new construction and built to last
• Easy installation with pre-punched knockouts at 1-inch intervals
• Universal wiring available at either end
• Proven construction helps maximize surface area and funnel heated air
• Place under a window for best results
• Rest easy—includes high-temperature safety shutoff feature
• Durable, powder-coated finish stands up to nicks and scratches
• Proudly made in the USA

User questions & answers

Question:

Can you control the temperature

Answer:

It has a thermostadt that can be digitaly set to the desired temp. Now whether it can be set as low as 45 degrees I am not sure but you surely can set if for 50 degrees and it will function very well. I have a 400 square foot den and on the coldest days, and I am talking 20 degrees below, it will run you out of the room when set on 70 degrees. I had to set it at about 65 degrees to tolerate the heat. This heater really performs well. To answer your question will it turn off once the temp is reached...the answer is YES it will and turn on when it drops below the desired temp too.

• Baseboarders Basic Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length
• Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look
• Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater.
• All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow.
• Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original.

User questions & answers

Question:	Hi, is this material insulated
Answer:	negative
Question:	I see on the pictures that the caps go all the way down to the floor. Mine do not. Not sure if I need to “force” the cover more; worried about breakin
Answer:	You probably set the clip that holds the main unit too high on the wall. Hence, your end caps aren't reaching the floor, after you snap them on because of your measurement from the floor. I believe it is a specific height you need to screw the holders into the wall. Lower the the unit the distance your short and you should be all set.
Question:	Are these rust free
Answer:	We are very happy with these. They are well made and have a substantial glossy finish on them. Look great (so much better than our old flimsy, rusted ones). They have no evidence of rust.
Question:	These are really expensive for an l bracket. can't i just use standard 2.5" x 2.5" l brackets
Answer:	The only difference is that they put a fold I the metal so that there is a little space between the bracket and the wall for the lip of the cover to slip into. If you use a regular bracket and put a washer in between the bracket and the wall, I think it would work just as well.

Product features

Amazingly Durable

Each Baseboarders Basic panel and accessory is made of hiqh quality steel, is professionally powder-coated and will not rust.

Designed with Safety In Mind

Single piece panel construction ensures proper airflow around the heating element while prohibiting direct access to it, making it safer for children and pets.

Easy Slip-on Installation

Installation is an easy DIY project, requiring no tools or hired help. Simply remove the existing baseboard heater endcaps and front cover panel, snap your new Baseboarders Endcaps onto your Baseboarders panel, position the Baseboarders assembly onto the original back plate & push down firmly into place, that's it — you're done!

STEP 1: Remove one endcap and the front panel. Measure between the floor and the top of the heater.

• Objective: 7.5" or greater
• If less than 7.5" use the Wall Brackets (WB001) for mounting. This will bring the height up by a minimum of 1.25".

STEP 2: Measure from the bottom of the heating element to the top of the heater.

• Objective: Between 5″ and 6.75″
• If less than 5″ use the Wall Brackets (WB001) for mounting. If the distance is greater than 6.75″, the Premium TALL profile should be used.

STEP 3: Measure from the outside face of the finned tube heating element to the back plate.

• Objective: Less than 3.25″
• If larger 4″ x 4″ or 4″ x 6″ commercial style element is in place, a wood molding will solve the depth issue.

STEP 4: Measure for length and layout

• There is no need for fractional or perfect measurements. Each endcap can offer up to 1.75" for a total of 3.5" when using an endcap at both ends of the panel.
• Standard straight lengths are measured from end to end using the original back plate. If a straight section is missing the back plate, measure from one extreme end of desired coverage to the other extreme end of coverage. Then subtract 1″. This is the ideal panel length.
• Baseboard heaters longer than 6′ will require the use of multiple panels and couplers to register the ends together. Example: 8′ = Two 4′ panels and a Baseboarders Basic Coupler to connect them.
• If Inside Corners are required, panel lengths can be determined by: a. Removing endcaps, b. Measuring side 1 from pipe to corner, c. Subtract 3'' for depth of the adjacent cover, d. Repeat with side 2.

Product description

For gentle heat with maximum efficiency, look no further than this hydronic baseboard heater. This hard-wired unit provides gentle, steady heat for superior comfort. Since it uses liquid-element technology, the heater is cool to the touch, making it an excellent choice around children and pets. Low-profile design makes it a perfect fit for bedrooms, bathrooms, living rooms and dens. This heater is UL listed for safe operation on flooring, tile or carpet, and its thermal cutoff function prevents overheating.

• This baseboard model provides worry-free heating around pets and kids thanks to its hydronic design. The surface of the unit stays cooler to the touch while still providing reliable radiant heat.
• This convection heater starts up and stops without the disruptive popping or pinging sounds given off by traditional baseboard models.
• Keep dust and other particles from circulating, thanks to this hydronic baseboard heater's fan less operation. With no blower or exhaust fan, allergens and dander won't be blowing around the room.
• Keep the room comfortable and reduce unnecessary on/off cycles with this unit's up to 100% energy-efficient design.
• For worry-free operation, the unit's overheat protection feature prevents the heater from running when its air intake is blocked. , reducing fire risk

User questions & answers

Question:	is this unit white? or a beige color as shown in the photo
Answer:	More an Almond color, not as dark as a beige might be. Nice unit working well. Worth the extra money to not have unit that gets extremely hot as do standard baseboard units.
Question:	What is the square footage of space that this unit will heat comfortably
Answer:	This is difficult to answer as it depends on the insulation integrity of the space being heated (e.g., how much heat is lost), and the VOLUME of the space (ceiling height). Also, how many of the walls are exterior walls, and how many windows there are and their heat loss. You might find some heat system design calculators on line to help with this.
Question:	The info sheet data tells me the unit is only 2.9 inches wide. That could not be correct. What is the actual width of this heater
Answer:	The Fahrenheat baseboard heaters are uniformly 2.9" (2-7/8") deep (or thick) and 8.4" (8-3/8") high (or tall). The length or width varies with the wattage; I have 1500-watt units that are 70" long. Go to the Lowe's website to get trustworthy length/width measurements.
Question:	Are these quieter than a traditional electric baseboard heater? The frequent tick tick tick of our current heater makes us crazy at night
Answer:	To be completely honest, I never hear this running. It is in my home office which is a closed room and I never even know its on except the room is toasty and warm. This office is in an outside building on my property and it is right now 10 degrees outside and snowing and it is 67 cozy degrees in here. So short answer, no you never hear this running.

Product description

This new Wifi heater will make it easy for you to control the temperature of your wifi unit right from your phone!

• (Wall Mounted Heater Only.) Wi-Fi enabled makes it possible for you to control the temperature from your phone!
• Safe to the touch grill. 1500 watts of power
• Space saving wall mount design means you don't lose floor space. Perfect for bedrooms, kitchens, offices and more
• When installed over the outlet, you can hide the cord inside the heater. This unit stays cool to the touch and the wall stays cool.
• Safe to the touch grill. Wall mounted version, Feet not included.
• Voltage: 110 Volts

User questions & answers

Question:	Are you able to change the temp using google home? How do you get google home to tell you the current temp in F
Answer:	One should cover a average to large bedroom easily.
Question:	Does this heater allow you to start at a specific time? For example,start at 6am with plans to wake up at 7am
Answer:	I don't know. I can tell to you that we take them to hotels all the time. For both deodorizing and to kill germsome. We usually check in and get them going. Go have dinner. Come back and cut air on and room smells like it just rained!! Plus all the bacteria are clobbered too.
Question:	How do I know if this is 'energy efficient' as the description claims
Answer:	It is an ozone generator and it definatly does work. I just read the box and it doesn't say anything about negative ions but if I leave it on full blast over night, my livingroom/kitchen smells like a pool area
Question:	Is there an automatic shut-off feature after a certain number of hours of operation
Answer:	After 4 months the $0.20 Chinese fan got very very loud. I would have to repeatedly tap the device for it to get quiet. After seconds or hours it would get loud again. After 6 months it is always very very loud.

Product features

Heat Storm Heating Technology

EnergyWise Solutions is located in beautiful Cache County Utah and was created in 2008 as a distributor for infrared heaters for a variety of companies. As the infrared heater market continued to expand, EnergyWise recognized that a much better product could be built to bring the consumer a better experience.

EnergyWise started in 2011 with designing and creating our own technology and in 2012 we launched our own brand of infrared heaters, Heat Storm. We also filed a patent for our propriety Heat Management System (HMS patent #9,036,986 ).

WiFi Smart Heaters

Many of our models now come with WiFi technology making it easy for you to control your heater from your phone.

ETL Safety Certified

ETL is a Nationally Recognized Testing Laboratories (NRTL). NRTLs are in place to provide independent safety and quality certifications on products. All Heat Storm products are ETL certified. Conforms to STD. 1278 Certified to CSA STD C22.2 NO. 46, Interek 4006901 D.O.M. 2018/07

Efficient

Your room will warm up quickly and you will be able to rest easy knowing that Heat Storm infrared heaters are extremely energy efficient due to our patented HMS dual wall technology.

Portable

Heat Storm has created a line-up of heating units that are portable or wall mountable, making them perfect for heating bedrooms, living rooms, or any room in your home.

Product description

For maximum, steady heat with a gentle and comfortable effect, the Fahrenheat PLF Liquid Filled Electric Hydronic Baseboard Heater is the solution. This hard-wired UL-listed unit uses liquid-element technology, which makes it cool to the touch. This feature makes it an excellent choice to use just about anywhere, since it’s safe for kids and pets. The large element reservoir maximizes volume of heat storage fluid for prolonged comfort while maintaining individual room temperature, so you’re only heating the rooms you want. The linear high-temperature safety cutout automatically shuts off the unit if the air is blocked, and the tip-over switch prevents it from operating if it’s knocked over. The sleek, contemporary design seamlessly blends into most room aesthetics. Thanks to the high-impact Lexan ends and steel body, this heater resists dents, scratches, and rust. Fahrenheat is part of the Marley Engineered Products family, which provides a wide range of innovative, quality engineered, commercial, industrial, and residential electric comfort heaters and ventilation solutions. All our products are engineered with aesthetics, functionality, safety, and structural tolerance in mind. Prevent the insertion of foreign objects and other airflow blockages with this hydronic baseboard heater; its welded bar grille offers maximum airflow without allowing entry points for tampering. Wire up and connect this baseboard heater quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp; you can connect it to power from either side or even chain multiple units together. Hard-wired unit; 46 in. length; 240-Volt, 1000-Watt, 4.1 Amp; field-installed thermostat.

• USE ANYWHERE DESIGN: This heating unit provides gentle heat with maximum efficiency. Its hydronic design and safety grille means it stays cool to touch while providing unobstructed radiant heat, making it safe to use around small children and pets.
• OPTIMAL HEAT: The low-profile design makes it perfect for home use in bedrooms, basements, bathrooms, and living rooms, and perfect for commercial use in waiting rooms, day cares, offices, and more.
• EASY TO INSTALL: This unit can mount directly to any wall, and flat on the floor to wood, tile, and even carpet; the trim and low operating temperature allows for carpeting to be installed around it.
• SAFE AND EFFICIENT: This energy-efficient design reduces unnecessary on/off cycles, and the overheat protection feature prevents the heater from running when its air intake is blocked, reducing risk of fire.
• QUIET AND EFFECTIVE: The convection heater operates without the annoying popping and pinging noise that many other models give off. The fan-less operation keeps dust, allergens, and dander from circulating through the room.

User questions & answers

Question:	Multiple packs prices are incorrect: 1pk- $166.00, 2pk- $644.00, 3pk-$996.00, 4pk- $1,328.00, 5pk- $260.82. can I buy the 5pk for
Answer:	We're all customers like you. Best if you talk directly to the manufacturer or Amazon for pricing questions.
Question:	do these need to be installed by an electrician? or do they just plug in
Answer:	Electrician. In all loving kindness, if you don't understand that this is a 220-240 volt appliance and not the 110-120 volt appliance, then you wouldn't have the expertise to install this yourself. 110-120 volt circuits are what you normally plug your toaster, computer, TV, hair dryer, etc. into, that is, your standard wall plug. 220-240 volt plugs use heavy duty wires and plugs and are used for clothes dryers and kitchen stove/range/ovens. Usually water heaters and baseboard heaters are "hard-wired", that is, bypassing any plug-in and being permanently wired into the 220-240 circuit. You must also have a 220-240 volt circuit breaker in your electrical service box and a 220-240 volt circuit wired to the room you wish to have your heater installed - unless you are replacing a previous 220-240 volt heater. Putting in that type of circuit, stringing the wire from your service box to the room, would be a major task and expense, and require a permit from the local building authority as well as a certified electrician to do the work.
Question:	how long is this heater
Answer:	the heater is 116.cm, 46 inches or real close to 4 feet long
Question:	Is this a left or right wire
Answer:	Left wire install was seamless. I can't remember if it had a right side option.
Question:	Can i wire 2 or 3 of them together an what size breaker
Answer:	I have 3 of them hooked together. An 8', 4' and 2' one. They are on a 20 amp breaker. Always check with an electrician.
Question:	Does this require a single pole or double pole t-stat
Answer:	Double pole 20 AMP breaker and buy a thermostat individually that mounts to either end or wall thermostat?
Question:	Anyone aware of the energy efficiency of this heater
Answer:	This is just a standard 1000W baseboard heater there is no efficiency about it. You need a thermostat To control this unit either a wall or unit mount. And the heater will run until it reaches the temp you want.
Question:	getting this for a 4 season porch. I need a separate thermostat. Will this work with the Nest thermostat
Answer:	No, Nest thermostats don’t operate at “line” voltage(220volts). They operate at much lower voltage and cannot control resistance baseboard type heaters. I’ve been looking for such a smart “line” voltage thermostat and so far haven’t been able to find one.

Product description

Optimus brings you the finest in fans and heaters. The H-3603 is a baseboard convection heater. Features include two heat settings of 750 and 1500 -Watt, automatic thermostat control, three position function switch with off, low and hi settings, internal heat limiting thermostat, and power indicator light.

• 2 heat settings (750 and 1500 -watt)
• Automatic thermostat control
• Internal heat limiting thermostat with overheat alert and tip-over safety switch
• Durable heavy gauge sheet metal cabinet
• Built-in carrying handle

User questions & answers

Question:	Is this heater plugin or hardwire
Answer:	plugin
Question:	how long is the power cord
Answer:	5 ft 6 in long is the power cord
Question:	What are the exact unit dimentions
Answer:	28" long, 8" high and 6" deep
Question:	Just got mine. It rattles alot where the controls are when I move it around. Is this normal
Answer:	Mine doesn't rattle.

Product description

Quick comfort — that's what you'll get with this baseboard convector. This hard-wired heater provides fan-free warmth without circulating dust and debris. There's no need to worry about the unit overheating — its thermal cutoff function disconnects the power if it senses an unnecessarily high temperature. And it's UL listed for safe installation on carpet, tile or other flooring.

• Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling.
• Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp.
• For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked.
• This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design.
• This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet.

User questions & answers

Question:	Please tell me if this item is 72 Inch long
Answer:	Yes; however, I returned this item as it was damaged during shipping and then ordered a 60" space heater (different brand) as my window was only 60" long. I would not recommend the referenced space heater
Question:	Is this unit quiet as it heats up and then cools down when it shuts off
Answer:	You never hear it.
Question:	can it be wired from either side
Answer:	yes.
Question:	can two be wired together
Answer:	Yes

Product description

Honeywell Home RLV4305A 5-2 Day Digital Programmable Thermostat for Electric Baseboard Heating - now with white backlit screen 1 setting for week and 1 setting for the weekend 4 programmable periods per day Silent switching for accurate temperature control Use with electric baseboards (120 240V) convectors and to wire radiant ceilings Compatible with fan forced heaters

• Separate programming for the weekdays and weekends; up to 4 program periods per day
• Saves energy with personalized temperature control
• Compatible with electric baseboards (120-240V), convectors, and radiant ceilings. Product dimensions (WxDxH):4.8 x 1.2 x 5 inches
• TRIAC silent switching for accurate temperature control of +/-0.5°F.Storage temperature:-4°F to 120°F (-20°C to 50°C)
• Fast, easy, two-wire installation. High capacity, up to 3,500 watts at 240 volts.

User questions & answers

Question:	how do you install with four wires/two hot two nuetral to the two wires on thermostat
Answer:	Yes, I have 20 yo boiler system and 2 wires is all you need.
Question:	buying this for a ski resort condo wher power outages are common and water pipes are prone to freezing. Will it automatically start after outages
Answer:	Yes it's a green display with black txt, just as the picture shows
Question:	How many watts is the Honeywell RLV4305A1000/E 5-2 Day Programmable Thermostat for Electric Baseboard Heaters good for
Answer:	http://yourhome.honeywell.com/en/products/thermostat/5-2-day-programmable-thermostat-rth2300b1012 is the location. Scroll down the page and look under resources.
Question:	Can this unit be set to allow a large temp. swing before turning on/off to maintain room temperature, rather than turning on/off every few seconds
Answer:	Updated link to the product manual:https://customer.honeywell.com/resources/techlit/TechLitDocuments/69-0000s/69-2448EF.pdfAs noted elsewhere, in a 2 wire case it will always be Red and White

Product features

5-2 Day Programmable Electric Heat Thermostat

This versatile thermostat with TRIAC switching features outstanding accuracy and a backlit display.

Advantages of TRIAC switching:

• 100% silent operation -- ideal even for bedrooms
• Unsurpassed temperature control eliminates temperature swings
• No temperature swings means you are comfortable at a lower setpoint
• Comfort at a lower setpoint saves money on heating bills

Easy to Use

• Backlit display for easy reading
• Instructions inside front panel enable quick programming
• Battery-free backup means no re-programming your schedule after power outage

Simple Installation

• 2-wire non-polarized connection means fast, hassle-free installation
• Temporary bypass enables temperature override without changing programming

5-2 Day Programmable

• 5-2 Day Programming allows for separate programs for the weekdays and weekends
  • 4 time periods per day
  • Pre-programmed or personalized schedules
  • Selectable 12 or 24 hour format

Electric Heat Only

Compatible with:

• Electric baseboards
• Convectors
• Fan-forced heaters

Also ideal for radiant ceilings