5 best dewalt dw745

Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

Product description

The DEWALT DCS7485B FLEXVOLT 60V Max* 8-1/4" Table Saw Baretool features FLEXVOLT technology; this saw operates with the world's first battery that automatically changes voltage when you change tools. The FLEXVOLT battery is backwards compatible with our 20V Max* tools so you get up to 4X the runtime. (**With FLEXVOLT 60V max* battery when used with DEWALT 20V Max* tools). This is a bare tool item - battery sold separately. This table saw features 24" of rip capacity for ripping 4x8 Plywood or OSB sheets. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate, with tool free adjustment of the guarding. Table coating reduces friction for smoother cutting. This saw offers 'power-loss reset' which prevents accidental re-starts following a power disruption when the switch is left in the "on" position. It has a metal roll cage base for greater durability than plastic bases. On board storage included for guard, fence, push stick, riving knife, wrenches and miter gauge. Specs: no load speed 5800 RPM, arbor size: 5/8", depth of cut at 90 degrees: 2-1/2", depth of cut at 45 degrees: 1-3/4". Kit includes: table saw, carbide blade, push stick, blade wrenches, blade guard, rip fence, non-thru cut riving knife, miter gauge, and user guide. Battery sold separately.

From the Manufacturer

The DEWALT DCS7485B FLEXVOLT 60V Max* 8-1/4" Table Saw Baretool features FLEXVOLT technology; this saw operates with the world's first battery that automatically changes voltage when you change tools. The FLEXVOLT battery is backwards compatible with our 20V Max* tools so you get up to 4X the runtime. (**With FLEXVOLT 60V max* battery when used with DEWALT 20V Max* tools). This is a bare tool item - battery sold separately. This table saw features 24" of rip capacity for ripping 4x8 Plywood or OSB sheets. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate, with tool free adjustment of the guarding. Table coating reduces friction for smoother cutting. This saw offers 'power-loss reset' which prevents accidental re-starts following a power disruption when the switch is left in the "on" position. It has a metal roll cage base for greater durability than plastic bases. On board storage included for guard, fence, push stick, riving knife, wrenches and miter gauge. Specs: no load speed 5800 RPM, arbor size: 5/8", depth of cut at 90 degrees: 2-1/2", depth of cut at 45 degrees: 1-3/4". Kit includes: table saw, carbide blade, push stick, blade wrenches, blade guard, rip fence, non-thru cut riving knife, miter gauge, and user guide. Battery sold separately.

• Flexible - power of corded. Freedom of cordless. The world's first battery that automatically changes voltage when you change tools
• 24" of Rip capacity for ripping 4x8 plywood or osb sheets
• Rack and pinion telescoping fence rails make fence adjustments smooth and accurate
• Metal roll cage base offer greater durability than plastic Bases
• Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position
• Battery & Charger Sold Separately

User questions & answers

Question:	Does this table saw run on battery power and 120 V grid power as well
Answer:	Same as listed in the description 27.5 inches where the fabric attaches to the tubing and roughly 29.5 inches between the arms.
Question:	What is the average run time for a 60v battery in this application
Answer:	but what is the actual seat width inside the tubing?
Question:	is there a port for a vac hookup
Answer:	So sturdy!!! I have bad knees and this chair ticks all the boxes. Highly recommend!
Question:	What does flex volt saw blade mean
Answer:	I’m in FL .. no issues. Check with your state.

Product features

60V MAX 8-¼ TABLE SAW

● 24-inch rip capacity

● Cordless convenience with the power of a corded tool

● Rack and pinion telescoping fence system

● Site-Pro Modular Guarding System allows for tool free adjustments

● Material support allows for narrow rip cuts

● On-board storage for components included with saw

INTRODUCING FLEXVOLT

The world’s first battery that automatically changes voltage when you change tools.

THIS IS NEXT LEVEL POWER

The FLEXVOLT system brings you the future of power with cordless tools unlike anything you’ve ever experienced. With a highly innovative voltage-changing battery and a lineup of groundbreaking 60V MAX* and 120V MAX* tools to match, FLEXVOLT tools have the power that will change the way work gets done.

THE TECHNOLOGY THAT GETS IT DONE

The FLEXVOLT battery’s ability to automatically change between two voltages gives users a serious advantage when it comes to efficiency. It’s the battery that not only powers, but improves the run-time of our DEWALT 20V MAX* tools, so you don’t have to invest in a whole new system. It’s the battery that brings the power of corded to a new lineup of 60V MAX* and 120V MAX* DEWALT tools so you can finally work on a fully cordless jobsite. This revolutionary battery will change the way things get done.

ONE BATTERY. TWO VOLTAGES.

The FLEXVOLT battery is backwards compatible with our 20V MAX* tools so you get up to 4x the run-time. And because the FLEXVOLT battery is the only battery that automatically changes voltages when you change tools, you can slide the battery into a whole new lineup of 60V MAX* and 120V MAX* tools from DEWALT.

Product description

The DEWALT DWE74911 Rolling Table Saw Stand is designed for easy setup and break down with excellent stability. This stand is lightweight for enhanced mobility and portability. It features durable steel construction, and is designed for easy loading and unloading into and out of vehicle. Can be used with DWE7490X, DWE7491RS, DWE7499GD, DWE7480 and DW745.

• Durable steel construction
• Easy setup and break down with excellent stability
• Designed for easy loading and unloading into and out of vehicle

User questions & answers

Question:	Will this work with a dcs7485t
Answer:	Hi, thank you for your inquiry, The PDP Xbox One LVL 1 Chat Gaming Headset can be used with any Xbox remote with a 3.5 mm headphone jack input as well as any smartphone or other device with a headphone jack. Hope this helps. PDP Customer Experience
Question:	Is this stand compatible with the dewalt dwe7485 8-1/4 in. compact jobsite table saw
Answer:	Chat and game volume
Question:	does it work for flexvolt table saw
Answer:	Yes you can.. I've owned mine for about 2 weeks now and I have zero problems with it.. it works great
Question:	Can this stand work for a dewalt dwe
Answer:	No you do not. We have two Xbox one controllers. First generation needs adapter. Second generation does not.

Product description

The DEWALT DW7451 compact table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Heavy-duty tube steel construction provides the strength you need for safe operation. Integrated support bar hardware holes for secure fastening of saw to the stand. This stand is lightweight; it folds flat for easy handling, storage, and transport. Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw. Backed by a 3-Year limited warranty.

• Heavy-Duty tube steel construction provides the strength you need for safe operation
• Upport bar hardware holes for secure fastening of saw to the stand
• Lightweight; folds flat for easy handling, storage, and transport
• Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw

User questions & answers

Question:	does anyone have instructions to put the saw on the stand? #dwe
Answer:	You can view or download instructions via https://servicenet.dewalt.com/Products/Detail?productNumber=DW7451
Question:	I have the dwe7490. what is the correct stand for that model
Answer:	You can order stand #N272401 online or via the following link: https://servicenet.dewalt.com/Parts/Detail/320318
Question:	Do the legs adjust for uneven ground
Answer:	No, the legs are not adjustable.
Question:	Do this stand is foldable pretty easy for transportation
Answer:	Yes, it folds up very easily. However, it is bolted to the table saw, and it will not fold when attached, (which is good thing when you are using it!). What I do, when I haul this table saw, is just lay it on its side (with the stand attached) in the bed of the truck. It saves me unbolting the stand to haul it, and bolting it together again to to use it at the job site. The table saw that fits this stand is very light, so moving or lifting it with the stand on is no problem.

Product features

DEWALT DW7451 Compact Table Saw Stand

The DEWALT DW7451 table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Featuring heavy-duty tube steel construction that can support the stress of tough saw jobs, this stand is designed for use with the DWE7480 (10" Compact table saw) DCS7485 (60V 8 1/4" Table Saw) and the DW7450 (10" Compact table saw). DEWALT DW745 10-inch compact job site table saw. Integrated support bar hardware holes make it easy to secure the saw to the stand for confident operation.

Product description

DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2x4 Pine - or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2x8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

• Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility. Capacity to cup 3 5/8in nested crown and 3 1/2 base vertically
• Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy
• Compact, lightweight design (30 lbs.) allows for easy transport and storage
• Cam lock miter handle delivers quick and accurate miter angles
• Precise miter system and machined base fence support optimize durability and cutting accuracy
• Battery & Charger Sold Separately

User questions & answers

Question:	How well was this product packaged? Did anyone experience damage during shipping? I don't usually buy heavy items like this on-line. Thanks
Answer:	The saw was sufficiently packaged to protect it during shipping. I got mine in perfect condition. The manufacturer's packaging took care of most of the protection, and I'm pretty sure it was over-boxed as well. Hope this helps, and enjoy the saw. I haven't had a ton of use from mine yet, but have done several smaller projects with just a few cuts and have been pleased with the performance (it's not a cheap toy) and ease of handling. The size and weight make it easy to get it out and start cutting, then put away quickly when the job is done.
Question:	What is the difference between the dcs361b and the dcs361m
Answer:	The M1 is the European version
Question:	I see the vertical max is 3 5/8, but could this cut 4x4 lumber
Answer:	No not with one cut. You would have to turn the 4x4 over. Blade is a 7 1/4" diameter, same as a hand held circular saw. From the tip of the teeth to the edge of the washer (at center of blade) I get 2 7/8".
Question:	What's the cross cut capacity if we use the entire sliding action
Answer:	On a straight 90, I can cut 8" wide boards. On a 45, I can cut right around 5-7/8". This saw was a great addition for me, as I'm constantly working in places away from a simple power source (my generator is a beast and not easy to transport). It cuts cleanly, hasn't bogged down yet (even on wet 2x6 treated), and is super light and easy to transport.