12 best compound miter saws

Product description

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

• 10" Compound Miter Saw
• MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
• LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
• MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
• BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
• LARGE TABLE: Offers better material support with vice clamping system to secure work piece
• THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

User questions & answers

Question:	Does this take any 10” blade
Answer:	Yes, it will take any 10" blade with a 5/8" arbor.
Question:	does this come ready to use or is assembly required
Answer:	Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps!
Question:	Is the depth of cut adjustable
Answer:	Depth can't be adjusted on this model number. You will need a sliding compound miter saw.
Question:	According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too
Answer:	Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one.

Product features

45 Degree Bevel Range

To the left to provide clean and accurate bevel cuts

Horizontal handle

For a secure hold

15 Amp motor

Delivers high power for the toughest cutting jobs

Large table

for better material support with vice clamping system to secure work piece

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

• 🔥Ideal gift for your family & professional work
• 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
• 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
• 🎅Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.
• 🎅Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.

Product features

TACKLIFE Advanced 10-Inch 15-Amp Multifunctional Sliding Miter Saw-EMS01A

- Uses: can be widely applied to various materials like wood, MDF, chipboard, plywood, blockboard, hardboard, wood with nails, 3 mm mild steel plates and more.

- If you have the demand to change the blade, calibrate the bevel angle and know more about operating instrument

Please refer to the video guide below.

Extensible Table

Extended platform on both sides adds the stability when cutting the long material. Vice clamping system helps to fix the object.

Laser Guide

Red laser guidance illuminates the cutting line, and add the accuracy when you operate in dim environment.

Portable Tool

Weigh only 31.5 pounds, it can be carried around the job-site effortlessly with the help of built-in portable handle.

Dual speed adjustment for versatile uses

Dual speed adjustment for multiple applications - The speed can be adjusted to meet different cutting requirements. - Speed 1(3200 RPM): Ideal for soft aluminum, soft steel and more. - Speed 2(4500 RPM): Ideal for wood, plastic, plywood and more. - Now experience the cutting-edge design.

• 🔥Ideal gift for your family & professional work.Usually ships within 5 days.
• ➤DOUBLE BEVEL CUTTING & RED LASER GUIDE - Double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different cutting wood, plastic tubing and soft metal. Integrated laser controlled by single switch, marking the cutting line, helping sawing long work pieces.
• ➤3800 POWER MOTOR & EFFICIENT FOR OPERATION - With 15 AMP MOTOR and full-size performance at 3800 RPM, TACKLIFE sliding compound miter saw provides powerful, smoother, faster cutting. The equipment of soft-grip cutting handle and base angle change handle for added comfort. SLIDING DESIGN can extend cutting flexibility and add cutting width.
• ➤EFFICIENT DUST COLLECTION SYSTEM - Efficient dust bag can collect more than 70% of the dust produced. The 35 mm dust port allows you to connect a vacuum cleaner to achieve the ideal 100% dust collection, keeping the environment clean.
• ➤40 T BLADE & EXTENSIBLE TABLE - The 305mm 40-tooth TCT strong blade is ideal for cutting wood, plastic tubing and soft metal.Equipped with allen wrench, the blade can be easily changed.The wide worktable provides better material support during operation, and the pair clamping system ensures the safety of the workpiece, allowing for more secure cutting operations.

Product features

TACKLIFE 12-inch Double-Bevel Sliding Compound Miter Saw - PMS03A

• Powerful Motor: Powerful 15 Amp/1700 W saw delivers full-size performance at 3500 rpm, making cutting faster, smoother.
• Double Sliding Design: Sliding design for extended cutting flexibility and added cutting width.
• Double Bevel Cutting: You can adjust the cutting angle from left 45° to right 45° to meet different cutting needs.
• Clamping Device: The clamping device system ensures the stability and ensures the safety of operation.
• Comfortable Handle: Soft-grip cutting handle and base angle change handle to increase users' comfort.
• 3 Metes Cable: 3 meters long cable for your cutting work to provide more convenience.

Double-Bevel Cutting

You can adjust the angle from -45°-0°-45° to meet different needs, In detail: 0° : 4.13 x 12.99 inch, 45°(L) : 2.36 x 12.99inch, 45°(R) : 1.38 x 12.99 inch.

Precise Miter Angle

Adjustable miter scale with positive stops (-45°/-22.5°/0°/+22.5°/+45°) allow users to quickly adjust the saw to do square cuts, bevel cuts and compound cuts.

Maximum Cutting Performance

90°x90°: 105x335 mm

90°x45°(L): 60x335 mm

90°x45°(R): 35 mmx335 mm

45°x90°: 105x235 mm

45°x45°(L): 60x235 mm

45°x45°(R): 35x235 mm

Large Extended Worktable

2 Extension rods for a larger working table to meet your requirement of large pieces cuts. Vice clamping system helps to fix the objects and free your hands.

Precise Laser Guide

Built-in laser controlled with single switch, it works once the machine is power on, making straight cuts more professional and easier.

90% DUST COLLECTION

Included dust bag helps to collect over 90% dust to maintain a tidy working space. 30mm dust port also can connect with household vacuum cleaner.

Product description

The DWS716XPS 12 in. Double-bevel compound Miter saw is powered by a 15 amp motor that drives 3, 800 RPM to deliver extended power and durability. Integrated cutline™ LED work light system provides adjustment-free cut line indication for accuracy and visibility. This saw features a stainless steel Miter detent plate with 14 positive stops and cam Miter Lock system that provides repeatable accuracy and durability with easy adjustments. Tall sliding fences support 6-1/2 in. Of base molding vertically and 6-5/8 in. Of crown molding vertically nested.High efficiency dust duct is concentrated at the point of cut for maximum Collection. Lightweight design and built-in carry handle for portability. The new Dewalt DWS716XPS 12″ miter saw is almost identical to the DW716XPS, but there are some small changes. - Upgraded high visibility bevel scale - Longer base legs - New vertical quick clamp - Upgraded dust collection - Removable table under-guarding - New blade bolt design

• POWER AND DURABILITY: 15 amp, 3,800 rpm motor
• INTEGRATED XPS CUT LINE positioning system with LED light provides adjustment free cut line indication
• MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops
• MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents
• EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts
• CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90° and a 2x6-Inch dimensional lumber at 45°
• DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material

User questions & answers

Question:	Does anyone know a dewalt vacuum dust port adapter that would work with this dewalt dw716xps miter saw? thanks
Answer:	Adapters DWV9120, DWV9130 or DWV9150 are compatible.
Question:	Can you put a metal cutting blade on it to cut steel tubing
Answer:	Good question and I don't see any reason why not depending on the thickness of the tubing. I have a Dewalt chop saw I used to cut aluminum studs when I was refinishing my basement and it cut just fine with a metal cutting blade. It was a 10" vs 12" saw however. Motors and Amp rating was the same as my DW 716 Mite Saw. May want to ping someone at DeWalt or search thier web site. May not be the right thing to do but you could ask someone at one of the Big Box Home Improvement stores as well.
Question:	on dewalt's site it says this model is 3800rpm on here it says 3500rpm is this an older model
Answer:	On the saw that I bought 2 months ago, it says 3800 rpm on the motor casing.
Question:	Is the only difference between the DW716 and DW716 with XPS, the LED
Answer:	Dewalt 716 Type 20 will accept a light. You'll spend 75 on a handle, power supply, and led. MM Tool parts has the kit. The light is worth it.

Product description

Make Genesis Power Tools The beginning of your next DIY project! the Genesis GMS1015LC 10 in. Compound Miter saw with laser features a powerful 15 amp motor while competitor models only offer 14 amps for the same price. The included 60 tooth blade is great for finish carpentry cuts and means you don T have to spend additional money for a quality blade to start your project! laser Guided cutting offers better accuracy and an Electric brake stops the blade within a few seconds after releasing the trigger. An arbor lock makes blade changes faster and easier and an included hold down clamp assists with holding the work in place for safer operation! add the Genesis 10 in. Compound Miter saw with laser to your tool Collection today!

• Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!
• Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!
• Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!
• Electric brake stops the blade in seconds and Arbor lock for quick blade changes
• Includes: 60T Carbide blade installed, hold down Clamp, dust bag, Two extension wings, blade wrench and two AAA batteries for laser
• Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles
• Arbor lock for quick blade changes

User questions & answers

Question:	Where can I get parts for this saw
Answer:	tel:1.888.552.8665 Based in South Carolina, you’ll talk to a real American! So be sure you call during office hours on the East Standard Time Zone. (EST)
Question:	wiill this work with a harbor freight 12 inch sliding compound saw
Answer:	It may?? I am using my stand with a Hitachi 10" miter saw but it is not sliding.. It has good balance and I have not had any issues with it yet.I did have to mount a piece of plywood on the stand and the saw to the plywood but other than that it works well. Centering the saw on the stand will probably be the key with a sliding set up.
Question:	Will the saw store on stand vertically
Answer:	Yes
Question:	Can you cut finished 2x6s with this saw
Answer:	Yes. Put a piece of blue tape across the 2X6 where you want to cut it and cut the board right through the tape. Tape will help to insure a clean cut.

Product features

Safe and Powerful

The electric brake stops the blade in seconds and Arbor lock for quick blade changes.

Laser Cutting Guide

Know where the cut will be ahead of time with the integrated laser guide for quicker alignment and improved accuracy.

Versatile for Every Project

Use compound cutting for crown molding, shadow boxes, picture frames, and so much more. Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles.

You're Covered!

Genesis Power Tools are warranted free from defects in material and workmanship for two years after date of the original purchase. Please call our Toll-Free Help Line if you need any additional help: 888-552-8665

Product description

The C12RSH2S miter saw is the top of the line 12" sliding dual compound miter saw Applications: Ideal for trim carpenters, framers and woodworkers who demand precision and reliability. Compact slide system: The compact slide system requires zero clearance. The fixed rail system allows the miter saw head to smoothly glide along the fixed rails, eliminating the rear clearance that other sliding miter saws require. The compact slide system decreases the footprint of the saw by up to a foot, saving valuable real estate in any shop environment. Tall Sliding Fences: The miter saw also features tall sliding fences that allow for cutting much larger material, while easily sliding out of the way when making bevel cuts. Tool-less Laser Market: Easily adjust the laser marker allowing novice to expert users higher prcecision to make perfect accurate cuts. Miter Angle: 0-57 degree miter angle to the right and 0-45 degree to the left for flexibility Bevel: 0-45 degree bevel angle range to the right and left allowing quicker and easier cuts Motor: Powerful 15 amp motor to tackle tough cutting jobs with ease

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• (Motor) Powerful 15 amp motor to tackle tough cutting jobs with ease
• (Compact Slide System) Allows the saw head to slide along fixed rails, eliminating the need for rear clearance
• (Includes) C12RSH2S miter saw, 12 inch 60T TCT Saw Blade, Dust Bag, Vice Assembly, 17mm Box Wrench
• (Large Sliding Fences) Raise fence height to 5-1/8 inches to cut up to 7-1/2" Crown molding vertically

User questions & answers

Question:	A little confusing on whether it comes with a blade. The two options are for with or without blade but the cheaper one advertises the blade included
Answer:	I got it with a blade. It’s. Cheap one so I replaced mine right away
Question:	Is this saw really 77lbs
Answer:	Yes ! It’s heavy . I purchased the portable miter table with wheels from harbor freight to roll it around but you still have to take it on and off the table before beginning to move saw . Example; when putting it in and out the bed of a truck you have to attach and detach the saw
Question:	Anyone know the difference between the c12rsh2s and the c12rsh2m (seen in big box store)? can't find info on either on metabo site
Answer:	Hi there! The C12RSH2S has been updated to comply with the most recent UL standards. Hope this helps!
Question:	maximum height and thickness of cut at 90 degrees
Answer:	Capacity at 90 Degree Cross Cut = 4-3/16" x 12-1/4" or 4-11/16" x 10-3/16"

Product features

Compact Slide System

Allows the saw head to slide along fixed rails, eliminating the need for rear clearance

Laser Marker System

Increases cutting accuracy

Large Sliding Fences

Raise fence height to 5-1/8 inches to cut up to 7-1/2" crown molding vertically

57 Degree Miter Angle

To the right and 0-45 degree to the left for flexibility and 0-45 degree bevel angle range to the right and left

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

The Makita 10” dual-bevel sliding compound Miter saw with laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you'll get all the cutting performance you need in a slide compound saw, but with the most compact size in the Category for increased portability. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4” baseboard, capacity, it can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more. The LS1019L is powered by a 15 amp direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.

• 10" slide miter saw with the Crown molding cutting capacity (6-5/8" nested) of a 12" miter saw
• Linear ball bearing system engineered to deliver "dead-on" accurate cuts
• Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4")
• Unique 2-steel rail sliding system design offers single slide-glide operation; reducing saw's footprint and allowing operation flush against a wall
• Less weight (57.9 lbs.) and the most compact design in its Class for easy jobsite portability

User questions & answers

Question:	How close is the laser to the cut line? Does the laser line move as you lower the saw blade
Answer:	I'm not aware of any movement of the laser as you are lowering the saw down. Although the purpose of the laser is to be able to cut a mark line when the saw is in upright position.
Question:	Does this saw come with the extension wings like its pictured
Answer:	Yes they are included, they are attached to the saw. Loosen the thumb screw and slide them out.
Question:	As of Mar 2018, Does it still cut an arc when sliding, as opposed to a straight line
Answer:	Mine does not. Be careful with damaged packaging and saw impact
Question:	Does the laser show both sides of the blade, that is is it a dual laser? Also does the laser have a separate switch or is it centrifical
Answer:	The laser is on one line only and it can be switched left or right of the blade. There is a separate ON/OFF switch for the laser

Product features

Makita LS1019L 10" Dual-Bevel Sliding Compound Miter Saw with Laser

The Makita 10” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you'll get all the cutting performance you need in a slide compound saw, but with the most compact size in the category for increased portability. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 5-1/4” baseboard, capacity, it can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more.

The LS1019L is powered by a 15 AMP direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.

LS1019L Includes:

Vertical Vise (122854-6).

Dust Bag (122852-0).

Triangular Rule (762001-3).

10" x 5/8" 60T Micro-Polished Miter Saw Blade.

Hex Wrench 6 (781044-6).

Product description

The Makita 12” dual-bevel sliding compound Miter saw with laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-steel rail sliding system that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). it will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). the bevel Lock is located in the front of the saw for easy access and Quick adjustments from 0° to 48° (left and right). the saw is powered by a 15 amp direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. In addition, the electronic speed control maintains Constant speed under load for smoother, higher-quality cutting. Additional features include a high-quality 60T carbide-tipped blade, and a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise “left-of-blade” or “right-of-blade” cutting. It has dual dust Collection ports for improved dust Collection capability for use with a bag (included) or vacuum (sold separately). it also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting.

• Unique 2-steel rail sliding system design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall
• Increased capacity for up to 8" Crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90
• In-front bevel lock for convenient operation
• Dual dust collection ports provide excellent dust extraction performance
• Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4")

User questions & answers

Question:	can you turn the laser off
Answer:	Yes
Question:	Has it led light
Answer:	Yes
Question:	I’m considering the dewalt and bosch versions of this saw as well. has anyone had experience with the makita v either the dewalt or bosch? thanks
Answer:	I tried DW's 780 model last year on a small commercial job and it just sucked. Well, it didn't suck in one respect, namely dust collection, which was the worst I've seen on a modern tool. As bad, the dual sliding tubes had stiction built-in so you got a very jerky action when pulling the saw forward or pushing it back. The thing was terrible in a few other respects as well, and I returned it to the leading big box store under their branded credit card return policy. I have an older DW 12" miter saw that I've had since it was new about 13 years ago and it's only a little better. I'm going to try a Makita pretty soon and will seel the old, inaccurate, troublesome-since-new DW. I like their battery tools but I'm all done with their plug-in stuff.
Question:	Does the back fence move
Answer:	No

Product features

Makita LS1219L 12" Dual-Bevel Sliding Compound Miter Saw with Laser

The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees.

DXT™ DEEP AND EXACT CUTTING TECHNOLOGY

Deep and Exact Cutting Technology (DXT) is a series of features that give Makita miter saws more cutting capacity and out-of-the-box accuracy for superior cutting performance. The innovative direct drive gearbox and guard system utilizes a portion of the back of the blade for significantly more vertical cutting capacity when cutting baseboard and nested crown molding. In addition, the direct drive gear box has no belts to slip or replace, so power is transferred more efficiently from the motor to the blade. The patented 4-steel rail sliding system with 6 linear ball bearings is engineered for minimal deflection for smooth, dead-on cuts for lasting accuracy, job after job.

Product description

DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity

View larger Functionality and Portability The DEWALT DWE7491RS 10-inch Jobsite Table Saw with 32-1/2 inch (82.5cm) Rip Capacity and a Rolling Stand features a rack & pinion fence system which makes fence adjustments fast, smooth and accurate. The 32-1/2 inch rip capacity easily cuts a variety of larger shelving and trim materials - the patented material support allows this to be used for narrow rip cuts. This unit features a 15 amp motor which quickly rips through hardwoods with ease. The telescoping fence rails easily extend and retract to create a small portable package and the flip-over ripping fence allows for narrow rip cuts. This saw offers 3-1/8 inch depth of cut at 90 degrees and 2-1/4 inch at 45 degrees. A 2-inch dust collection port easily connects to a vacuum for efficient dust extraction to keep clean up at a minimum. The rolling stand is designed for easy set up and breakdown with excellent stability, and features large heavy duty wheels that easily roll over steps, curbs, and jobsite debris. The 26-1/4 inch X 22 inch table provides superior material support. This unit features an on-board storage system which provides easy access to the Site-Pro Guard components and push stick when not in use. View larger Common Applications Cabinet Installers: ripping filler boards. Hardwood Floor Installers; ripping floor boards. Trim Carpenters: ripping moldings, wainscoting, ripping and cross cutting 1X material for framing book shelves and entertainment centers, ripping framing lumber. Deck Builders: ripping deck boards, rail cap, railing. Remodelers: ripping framing lumber, sheet material (4 feet X 8 feet). Serious Woodworkers: home hobbyists, ripping sheet material (4 feet X 8 feet), framing lumber, (2-inch X 12-inch), sizing material up to 3-inches thick, ripping and cross cutting 1X material used for dados, rabbets, mortise and tenons.

What's in the Box Jobsite Table Saw 10-inch 24-Tooth Carbide Blade Rolling stand Push Stick Miter Gauge View larger About DEWALT DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.



DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Product 1: Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Product 1: Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Product 1: Rolling stand designed for easy set up and breakdown with excellent stability
• Product 1: Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Product 2: Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Product 2: Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Product 2: Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Product 2: Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

Product description

Remember when your Miter saw could do it all? Create cuts at any angle with the WEN 10-inch single bevel sliding compound Miter saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive Miter stops: Two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, The Miter Lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-Tooth carbide-tipped blade (W/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust Collection port allows for connection to either the included dust bag or your dust Collection device of choice. And, because it’s a WEN product, your Miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick
• Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left
• Onboard Class II laser guide illuminates your line of cut
• Features a 7-1/2-inch Crown molding nested capacity and a 6-3/4-inch base board vertical capacity
• Includes a 10-inch 40-Tooth carbide-tipped blade, Two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

User questions & answers

Question:	Cut steel
Answer:	Thin steel you can cut but have to have the correct blade that is make to cut steel.
Question:	What size is the arbor
Answer:	Arbor size is standard 5/8"
Question:	Are the indents on the miter gauge tape or stamped
Answer:	Stamped
Question:	Will this saw cut a 4x4 piece of lumber
Answer:	Yes. With ease