14 best bosch miter saws

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

The innovation responsible for both the unique appearance and the unparalleled level of performance is Bosch's patented Axial-Glide system. Beyond giving the CM10GD its distinctive profile, Bosch's Axial-Glide system eliminates three key challenges miter saw users have endured since the first slide systems debuted many years ago. While the traditional sliding compound miter saw approach enables users to make wider cross cuts, that system takes up more space and is prone to misalignment and stickiness over time. By replacing the sliding rail system with a hinged or articulating glide arm system - similar to the linkage used in a four-bar suspension design - Bosch created a more compact miter saw that delivers durable precision, remaining true and smooth over time. The Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw features a powerful 15-Amp, 4, 000-RPM motor with large easy-to-read bevel and miter scales allowing for precise, quick and easy adjustments: 52-Degree Left/60-Degree Right Miter Capacity; 47-Degree Left/47-Degree Right Bevel Capacity with marked detents and roof pitch angles. The tall sliding 4-1/4-Inch fences allow for increased cutting capacity when cutting tall base and crown moulding. With an ergonomic soft-grip ambidextrous trigger handle and a clear lower guard for unobstructed visibility throughout cut, the CM10GD provides maximum comfort for all-day use.

• ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment
• CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy clean-up.
• CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown/chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown.Depth Front-to-Back, Not Including Arm:30 inch
• COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do.
• COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.

User questions & answers

Question:	What are the dimensions for this saw
Answer:	Maximum crosscut up to 2-in x 8-in (nominal) at 90 degrees and 2-in x 6-in at 45
Question:	I have looked everywhere and can't find the saw's footprint size. How wide and deep in the saw base not counting the glide system
Answer:	No it is not
Question:	I have a flip top cart, the with is about 24 inch, can this saw fit on that
Answer:	yes
Question:	What is the maximum board thickness this saw can cut? This specification is listed nowhere for some reason
Answer:	yes

Product features

Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw

The Bosch CM10GD 10-inch Dual-Bevel Glide miter saw provides power and versatility. Thanks to the compact design and the innovative Axial-Glide System, this unit provides smooth cutting control in up to 10 inches less workspace than other miter saws, so users are able to work productively in hallways and other tight quarters. The saw delivers 4,800 no load rpm with outstanding cut capacity – 12-inch horizontal capacity (nominal), 5-1/2-inch vertical capacity against the fence (base), and a 6-inch crown capacity against the fence (45 degree spring).

Includes

10-Inch Dual Bevel Glide Miter Saw, 60-Tooth Blade, Material Clamp, Dust Bag

Axial-Glide System

The innovative Bosch Axial-Glide System gives the user durable precision in a compact workspace. Replacing the sliding rail system with a hinged or articulated glide arm system saves up to 10 inches of working room while giving the user enhanced alignment and a smooth glide for the life of the unit. As a result, users produce smooth cuts and have complete control over the saw's cutting motion.

Flexibility and Ease of Use

The all-metal bevel lock lever and range selector was designed to be upfront on this unit, to enable fast and easy bevel settings without reaching around behind the saw. The tall 4-1/4-inch sliding fences also support quick bevel set-ups, professional level precision and increased crown molding capacity.

Lock and Chop

For the utmost in chop cutting capacity for a 10-inch miter saw, the Bosch CM10GD has a crown/chop lock that locks the head in place. This enables users to power through upright base molding and nested crown molding. The adjustable miter detents with easy-read markings let you accurately set cuts up to 47 degrees left or right. The common angles have miter detents at 0, 15, 22.5, 31.6 and 45 degrees on the right and left, and 60 degrees on the right.

Dust in the Bag

Like other Bosch models, this saw includes a combination dust chute and vacuum adapter to hook up your 1-14-inch and 35mm hoses. The "click and clean" platform ensures that the vac hose remains in place, so users can concentrate on making the cut.

Product description

This Bosch Surgeon 12 In. miter saw features the Axial-Glide™ System and BITURBO Brushless Technology to deliver a professional cordless solution to the jobsite. The GCM18V-12GDC features the Bosch-exclusive Axial-Glide™ for wider cross-cuts, enhanced alignment and smooth glide for the life of the tool. This system features and articulating arm with no slide arms behind the saw, so it takes less space than a sliding-rail miter saw. It delivers a large cutting capacity, with a 4.7 In. depth and a 15.7 In. width/crosscut. The bevel controls are upfront for easy access. This compact saw is portable while being compatible with a variety of 12 In. blades. This miter saw is part of the PROFACTOR System, which pairs BITURBO Brushless Technology with a CORE18V PROFACTOR battery. BITURBO Brushless Technology is a high-performance motor and drive-train system designed to deliver power comparable to high-demand corded tools. It has ECO mode, which extends the battery runtime by up to 20%. The saw features connectivity (module sold separately), providing a link to a connected device via Bosch Toolbox App to customize speed selection and individual mode setting.The saw provides integrated base extensions that extend material support up to 43 In. The 4-3/4 In. tall fence design supports taller material for accurate cuts.

• Surgeon PROFACTOR performance – for a truly mobile jobsite solution, this saw provides light weight and pro capacity
• Axial-Glide system – has an articulating arm, for wider cross-cuts enhanced alignment, and smooth glide while taking less space
• Large cutting capacity – features a cut capacity of 4.7 In. depth and a 15.7 In. width/crosscut
• BITURBO Brushless Technology – featuring a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by CORE18V PROFACTOR batteries (sold separately)
• Convenient portability – weighs only 59.3 Lbs. (tool only, not including battery)

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Bosch Power Tools GCM12SD - 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

Oshlun LG-M01 Miter and Portable Saw Laser Guide, Miter & Portable Saws

Oshlun’s new 2nd generation laser guide is the easiest and best way to turn your saw into a precision cutting machine. Installation is fast and easy, simply replace the outer blade flange with the laser unit. There are no confusing parts or adjustments. The laser guide provides a brighter, more accurate line on the left of the saw blade kerf and improves safety by showing you where the blade will cut. The centrifugal switch activates the laser automatically. Notes: Will not fit some 12-Inch saw models that have interlocking arbor flanges, including Rigid and ProTech. Use our Radial Arm Saw model LG-R01 for saws with a 5/8-Inch threaded arbor shaft.

Our new 2nd generation laser guide is the easiest and best way to turn your saw into a precision cutting machine. Installation is fast and easy, simply replace the outer blade flange with the laser unit. There are no confusing parts or adjustments. The laser guide provides a brighter, more accurate line on the left of the saw blade kerf and improves safety by showing you where the blade will cut. The centrifugal switch activates the laser automatically. Notes: Will not fit some 12-Inch saw models that have interlocking arbor flanges, including Rigid and ProTech. Use our Radial Arm Saw model LG-R01 for saws with a 5/8-Inch threaded arbor shaft. 630-680nm, Max Output: <5mW, Class IIIa Laser Product. Complies with subchapter J, 21 CFR CH 1. Wavelength: 630-680nm, Max Output: <5mW, Class IIIa Laser Product. Complies with subchapter J, 21 CFR CH 1.

• Product 1: Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Product 1: Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Product 1: Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Product 1: Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Product 2: Fits most 7-1/4, 8, 8-1/4, 10, and 12-Inch Miter, sliding compound miter, chop, and portable saws
• Product 2: New recessed laser design to protect the laser from hitting the material on deep cuts
• Product 2: New thinner design to fit more saws
• Product 2: New brighter and more accurate laser line

User questions & answers

Question:	is ther laser on this saw
Answer:	Yes I do think you would need the larger bracelet my wrist is 6 1/2 inches and it’s very very snug. I do think this is the most beautiful piece of jewelry that I’ve ever owned
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	In my opinion it is just as nice
Question:	Where is this saw made? Asia/US/EU
Answer:	Thank you for your inquiry. The 7 inch will be in stock within the next 2 weeks.
Question:	Why buy this miter saw versus the Bosch
Answer:	Thank you for your inquiry. This bracelet is not engravable.

Product description

The Bosch CM8S 8-Inch Single Bevel Sliding Compound Miter Saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighing only 37 lbs., these features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales and detent system provides quick and accurate cuts. Uniform marks from 52-degrees left to 60-degrees right with 10 adjustable miter detents set at most common cuts. The CM8S also has the same crosscut capacity (12-3/4-Inch) as a 10-Inch miter saw, at 30-percent the weight.

• CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.
• SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°
• STABILITY: The Bosch CM8S miter saw features an adjustable front stabilizing foot, maintaining saw stability when performing slide cuts allowing maximum capacity.
• CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.
• PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1/4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds

User questions & answers

Question:	Is it 8 or 8 1/2 " both sizes on description page
Answer:	England. My housemate is from Oxford & they are his favorite. I enjoy them, also.
Question:	What is the maximum depth of cut with the 8-1/2" blade - can it cut through a 4 x 4 (3-1/2") without having to turn the material
Answer:	Have only ordered currants.
Question:	can a metal cutting blade be used on this saw
Answer:	The 100g package is 2 strips of 5 biscuits each or 10 biscuits per 100g package. The case of 12 100g packages is the best deal due to shipping. Besides it is not that much really.
Question:	comparing this saw to other standard 10in sliding saws (dewalt, rigid), how does it compare for precision? (my existing harborfreight saw is terrible
Answer:	The Garibaldi Biscuits I recently received have an expiration date of July 2017, and I received them in September 2016. That's a long shelf life. Perhaps by the phrase "so stale", you may be referring to the crumbly nature of these biscuits. The biscuit part is a little thicker, and a little more crumbly than the old "Sunshine Raisin Biscuits" that were discontinued long ago. If by "stale" you mean crumbly, yes they are. I suggest eating them over a paper plate or over a sink - definitely NOT on the couch without a plate underneath.

Product features

Bosch CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw

The CM8S 8-1/2 In. single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds.

These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw.

The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts.

Product description

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N14 Surgeon tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31. 5 Lbs. , this saw features easy portability while still providing a 10-5/8 In. crosscut capacity. It features BITURBO Brushless Technology, a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah (sold separately) CORE18V batteries. In testing, the saw delivers 377 cuts per charge with a CORE18V 8. 0 Ah Performance Battery. With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

• Portable, powerful 18V miter saw design – a truly mobile jobsite solution, this saw provides light weight and pro capacity
• Pro capacity – delivers 3-5/8 In. nested crown cutting, with 47° left to 47° right cuts against fence and 10-5/8 In. crosscuts
• Convenient portability – weighs only 31. 5 Lbs. (tool only, not including battery)
• Accurate laser guide system – precisely aligns the cut line to the blade
• Precisely centered sliding bars – delivers very smooth and easy saw sliding
• CORE18V 8.0 Ah PROFACTOR Performance Battery – delivers 100% more runtime and over 75% more power than the CORE18V 4.0 Ah battery for high-demand applications

Product description

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N Surgeon bare tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31. 5 Lbs. (tool only, not including battery), this saw features easy portability while still providing a 10-5/8 In. crosscut capacity. It features Bosch’s MEGAWATT Technology, a Bosch-exclusive brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah CORE18V batteries (sold separately). In testing, the saw delivers 377 cuts per charge with a CORE18V 8. 0 Ah Performance Battery. With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

• Portable, powerful 18V miter saw design – a truly mobile jobsite solution, This saw provides light weight and Pro capacity
• Pro capacity – delivers 3-5/8 in. Nested Crown cutting, with 47° left to 47° right cuts against fence and 10-5/8 in. Crosscuts
• Convenient portability – weighs only 31. 5 lbs. (Tool only, not including battery)
• MEGAWATT Technology – a Bosch-exclusive brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah CORE18V batteries (sold separately)
• Accurate laser guide system – precisely aligns the cut line to the blade. Max. Cut Capacity - 0° Miter 0° Bevel-2-3/4 inch x 10-5/8 inch. Max. Cut Capacity - 0° Miter 45° Left Bevel-1-1/2 inch x 10-5/8 inch. Max. Cut Capacity - 45° Miter 0° Bevel-2-3/4 inch x 7-1/2 inch. Max. Cut Capacity - 45° Miter 45° Left Bevel-1-1/2 inch x 7-1/2 inch

User questions & answers

Question:	How many amps is the motor
Answer:	Hi! Since he GCM18V-08N is a cordless tool, the amps would depend on the battery used. For best performance, we recommend using the GBA18V80 8.0Ah battery. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does this saw have an LED light to create a shadow line or just a laser
Answer:	The GCM18V-08N features an accurate laser guide system – precisely aligns the cut line to the blade. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the blade arbor size for the US version of this saw
Answer:	5/8" minimum arbor. Blade diameter 8¼" – 8½"
Question:	Is there a way to plug in or is a adapter planned for that? Thank you
Answer:	No way to plug in that I know of. Have not heard of any plans to make it adaptable to corded and cordless.

Product features

Bosch GCM18V-08N 18V 8-1/2 In. Single-Bevel Slide Miter Saw

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N Surgeon bare tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31.5 Lbs. (tool only, not including battery), this saw features easy portability while still providing a 10-5/8 In. crosscut capacity.

With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

Product description

This 12-Inch compound miter saw, model 3821, includes the Quick Mount System, a laser, extension rails and a powerful motor that make it an ideal miter saw for any intermediate Dyer or woodworker.

• Laser cutline guide for fast and accurate cuts
• 9 positive stops for setting common miter angles
• Powerful 15 amp motor with 4,500 RPM
• Table extension with left/right extension rails for long, large work pieces
• Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02)

User questions & answers

Question:	Some specs I saw said it would cut up to 8” vertically laid against the fence base, is that true
Answer:	HI Our 61900Q is 3600 RPM's thank you
Question:	will this cut 6 inch laminate flooring with one cut? and on a
Answer:	Yes the 61900 can do plunge cuts. There is a knob that can be loosened so the head can move upward then down. Reference page 22 (Plunge Cut) in owner’s manual http://www.qep.com/wp-content/uploads/2015/09/OM_61900Q_123_123.pdf
Question:	Blade included
Answer:	Good day,The 61900Q will do plunge cuts.Thank you for choosing QEP.Customer Service
Question:	I am confused. Does it come with a stand? It seems to say that but then they are referring to a quick mount stand like it was a seperate product
Answer:	metal cutting application with this product are dry only.

Product features

The Ultimate Miter Saw Design

The SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser comes with a Powerful 15 Amp Motor with 4,500 RPM. This miter saw by SKIL also comes with a Quick-Mount System for quick and easy setup on SKIL miter saw stand.

Easy to Assemble

Simple to adjust and convenient to use, the SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser is highly recommended for woodwork and other fabrication. It has an innovative design with positive stops for setting common miter angles. Well-built of heavy-duty and tough material, this miter saw speaks well of its safety.

A Stunning Laser

Use the Positive stops for setting common miter angles is super-efficient as it also includes a Laser Cutline Guide for fast and accurate and precise cuts.

Product description

The MX1234 Miter Saw Length Stop Kit is designed to work with all Bosch Miter saws featuring adjustable works supports.

• Quickly attaches to miter saw work support
• Allows for quick sizing of materials
• Designed for years of high performance
• Item Package Dimension: 7.0" L x 3.0" W x 1.15" H

User questions & answers

Question:	This works for cm10gd
Answer:	Not sure. I bought a switch for my Bosch and it fit. If this is the one I bought it worked well
Question:	Is this just one stop or two (would need one for each side of the saw
Answer:	Pull the guard back and place a dowel or screw in the slot where the guide screw is.
Question:	Does it come with the 2 rails
Answer:	Fits good. The EU as lit and price is good
Question:	does it work with the gcm12sd
Answer:	yes, it should, it's got a large opening wire on it

Product features

Bosch MS1234 Miter Saw Length Stop

The MS1234 is made of 1/8 In. steel that is designed to assist in making repeated cuts of the same length. Package includes all needed mounting hardware. Easily stores on-board tool when not in use.

Product description

The Delta Cruzer 12 Inch sliding miter saw uses military-grade aluminum frame members with heavy duty bearings for super smooth cutting operation and extremely long life. The dual bevel sliding CRUZER Miter saw has an industry leading 18 inch nominal cross cut capacity. The space saving design is easy to transport and fits against the wall in a shop. 1.5 in dust port for vacuum connection and excellent dust collection

• Shadow guide cutting line projects a consistent and accurate cutting line on your work piece
• Product dimensions – 30” D x 25.5” W x 21.5” H | Weight – 57 lbs. | Voltage – 120V | Blade size – 12” Diameter | Arbor hole size – 1” | Speed – 4,000 RPM | Max cut thickness – 6.5” | Cord length – 7 ft.
• One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety
• Molded handle and full size trigger is comfortable for right or left handed users 15 amp motor for powerful cuts and blade brake for safety shadow guide cut line for repeatable accuracy
• Dual bevel 47° left/47° right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops | 50° left miter/60° right miter capacity with 10 miter detents and positive stops

User questions & answers

Question:	Is there a restocking fee
Answer:	Mine came with two 18V Lithium batteries. They were the XC5.0 (5 Ah).
Question:	What is the dimension from the top of the table to the bottom of the base if I want to make extension wings
Answer:	I can't remember.If it did, I'm not using it because it was cheap,or didn't fit everything. I do use the big clippers to cut my hair every two weeks.
Question:	Is this the gen
Answer:	The oil is listed as made in china, "a pure thin natural oil with no additives" but it does not say what kind. It has not caused any reaction and keeps the blades clean and moving well.
Question:	Is this a gen-1 or
Answer:	7/8"

Product features

Maximum capacity

A HUGE 18 inch cross cut capability, 12” carbide blade and an extending arm on the Delta DUAL BEVEL Sliding Compound miter saw provides you versatility to take on the most demanding projects. Easily cut 7-1/2 inch crown and 6-1/2 standing base mouldings. The saw’s unique design operates in compact space compared to sliding miter saws with long rail systems

.

Accuracy

One-hand front miter controls with push button miter detent override and front bevel release for quick Accurate alignment. The patented extending arms reduce lateral movement of the cutter head. This saw is designed to provide you repeatability and the Accuracy demanded by professionals

Durability

The Delta Cruzer 12 inch sliding miter saw uses military-grade aluminum frame members with 18 heavy duty bearings for smooth cutting operation on and extremely long life. It’s 15 amp motor, advanced engineering, and 5-year PLEDGE establish this miter saw as a DURABLE and dependable tool that you can count for many years

Close quarters

This saw can operate in tight spaces and against a workshop wall

Powerful

15 amps of power plows through stock and heavy timbers

Smart design

The forward located DUAL BEVEL lever prevents you from the difficulty of reaching behind the saw to make bevel adjustments

Crown master

The Delta Cruzer makes perfect crown moulding cuts every time

Product description

The Bosch GKT13-225 Track Saw with Plunge Action delivers precision and power, ideal for making table-saw quality cuts to wood and wood-based sheet goods such as laminated particle boards and plywood. The track-guidance system provides exact adjustments for precision end-to-end cuts and plunge cuts. The saw and track combination makes it a more easily transportable alternative to a table saw. The precision of the track saw and blade combine with the optional Bosch tracks (sold separately) to deliver a straight fast finish cuts. The saw is engineered to fit precisely to the tracks. The saw includes constant electronics to help maintain speed under load. The saw also features a spindle lock, a swiveling hose port and a lock-off mechanism. It features overload protection. It has a single pivot point for both bevel and non-bevel cuts, from -1° (for slight undercuts) to +47° cuts. It allows for efficient dust extraction when connected to a suitable vacuum cleaner. The GKT13-225L Kit includes a 48-tooth 6-1/2 In. track saw blade, blade-change wrench, and an L-Box case. Bosch offers a full range of optional attachments, including four different track lengths, connector for connecting multiple tracks, an angle guide and a rip fence.

• Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood
• Plunge mechanism – allows for precise plunge cuts with accurate depth of cut
• Single bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cuts
• Constant electronics – helps maintain speed under the load of more-demanding applications
• Overload protection – protect the motor from overheating
• Efficient dust extraction – when connected to suitable vacuum cleaner, supports easier working conditions
• Swiveling hose port – keeps optional vacuum cleaner hose out of the way

User questions & answers

Question:	Does anyone know how to align this saw at the 90 degree cut position? What set screws should be adjusted
Answer:	I had the same problem with mine. I didn't see any way to adjust it. I returned it and bought the Festool TS75. I've been happy with that.
Question:	What is the motor amperage
Answer:	Hi! The GKT13-225L has a motor amperage of 13.0. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does it have a splinter guard like the festool
Answer:	Yes
Question:	Does it come with the tracks
Answer:	Hi! The GKT13-225L does not come with a track. The compatible tracks for this model are FSN800, FSN1100, FSN1600 and FSN2100. You can check for these items from this link https://www.boschtools.com/us/en/boschtools-ocs/track-plunge-saw-attachments-36319-c/. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Efficient and Easy Operation

The Bosch Tools Track Saw - GKT13-225L 6-1/2 In. Precision Saw works for the most demanding applications in wood, masonry and metal. The super-efficient and powerful plunge action provides a fast and easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood.

Heavy Duty

Along with various functions of this tool, it includes a plunge mechanism that allows for precise plunge cuts with accurate depth of cut fuel gauge. It also comes with an overload protection that helps protect the motor from overheating.

Packed with Features

The Bosch Tools Track Saw - GKT13-225L 6-1/2 In. Precision Saw with Plunge Action & Carrying Case also includes an efficient dust extraction and swiveling hose port that helps keep the work area clean when you are working on wood and other materials. Ideal for cutting, trimming, carving and other applications, this hand tool by Bosch is ideal completing projects around the house.

Product description

Makita's LS1221 12-Inch Compound Miter Saw combines power, performance, and ease of use for common miter cuts, including a range of applications in woodworking, cabinetry, deck building, framing, and more.

15 AMP Motor for Improved Performance

The LS1221 has a dynamically balanced 15-amp direct-drive motor with 4,000 rpm for improved performance and is engineered to never slip or bog down like belt-drive units. The electronic speed control maintains constant speed under load.

Precise Miter and Bevel Cuts

The LS1221 has a large capacity (3-7/8 inches x 6 inches at 90 degrees), with a 4-1/2-inch tall pivoting fence for cutting up to 5-1/2-inch crown molding and a pivoting fence for supporting larger stock. The saw has 9 positive miter stops at 15, 22.5, 31.6, and 45 degrees (left or right), and 0 degree (90-degree cuts). The engineered aluminum base ensures accurate cuts. Ease-of-use features include a horizontal D-handle design for easy and comfortable operation and a compact size (weighs only 37 pounds) for easy portability.

Best in Class for a Range of Applications

The LS1221 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, and general contractors seeking a superior 12-inch compound miter saw for the jobsite or the benchtop. The LS1221 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Saws

Cut after cut, Makita saws deliver power, performance, and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal, and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.

About Makita

Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best-in-Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

What's in the Box

Makita LS1221 12-Inch Compound Miter Saw, 12-inch C.T blade, vertical vise, extension wings, wrench, and dust bag.

From the Manufacturer

Our most popular 12-inch compound miter saw is ideal for picture framers, furniture makers, and trim carpenters. The 4-1/2-inches tall pivoting fence on this miter saw supports up to 5-1/2-inch crown molding for controlled cutting and the extra large cutting capacity can easily handle a 4-by-6 at 90-degrees. The high-torque 15 amp motor also delivers a strong performance at 4,000 rpm. Its large, easy-to-read miter scale has ultra positive stops at 15, 22.5, 31.6, 45 (left and right), and 0-degrees, and the 12-inch carbide-tipped blade with 1-incharbor will give you precise cutting every time. Your purchase includes blade, vertical vise, extension wings, socket wrenchand dust bag.

• Powerful 15.0 AMP motor delivers 4,000 RPM
• 4-1/2"" tall pivoting fence for cutting up to 5-1/2"" crown molding
• Positive miter stops at 9 settings: 15°, 22.5°, 31.6°, 45° right or left and 0° (90° cuts)
• Horizontal D-handle design for easy and comfortable operation
• Carbide tipped blade for precision cutting
• Electric brake for maximum productivity
• Pivoting fence for supporting larger material

User questions & answers

Question:	Could someone verify the current country of origin? Thanks
Answer:	Model # 9682080 arbor shaft is 5/8" diameter.
Question:	does this saw have a soft start
Answer:	the diameter of grinding disc and polish pads are 75mm. And the machine power is 1200w.
Question:	is this double bevel or single bevel
Answer:	Buy it for my son last summer he said they fit perfect . Well compare to the nike brand don't really know.
Question:	What is the country of origin
Answer:	Ok, here is a site that I got some information from: http://www.zappos.com/measure-your-shoe-size?gclid=CN6Vpoa358QCFQEaaQod4kQAGg - It shows that a men's size 6 is 9.25 inches long. It shows that a Big Kid size 5.5 is also 9.25 inches long. That is all I would be able to tell you on that. If I were you, I would order a men's size 6, but be prepared to return them if they would end up being too wide! Good luck!

Product features

Makita LS1221 12" Compound Miter Saw

Makita’s 12” Compound Miter Saw (model LS1221) combines power, performance, and ease of use for most common miter cuts for a range of applications.

15 AMP Motor for Improved Performance

The LS1221 has a dynamically balanced 15 AMP direct drive motor with 4,000 RPM for improved performance, and is engineered not to slip or bog down like belt-drive units.

Precise Miter and Bevel Cuts

The LS1221 has a large capacity with a 4-1/2-inch tall pivoting fence for cutting up to 5-1/2-inch crown molding and a pivoting fence for supporting larger stock. The saw has 9 positive miter stops at 15°, 22.5°, 31.6°, and 45° (left or right), and 0° (90° cuts). The precision-machined aluminum base ensures accurate cuts.

Range of Applications

The LS1221 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, general contractors seeking a 12” compound miter saw for the jobsite or the benchtop.

Product description

A mightier Miter saw. Backed by legendary worm drive gearing, The 12 in. Dual bevel sliding miter saw combines dependable quality and lightweight portability into one powerful tool. The time-tested worm drive provides relentless power with a 15 amp Dual-Field motor that keeps cool on the job, increasing longevity and work efficiency. Dual bevel capabilities allow for both left and right cuts, paired with adjustable bevel stops and 4 x 14 cross cut capacities to let you handle any joints on the jobsite. This saw is the lightest in its class - making For easy transportation. Feel the might, with SKILSAW.

• Worm drive delivers the relentless power and trusted durability needed to get the job done on any jobsite
• Lightest-in-class construction and convenient top handle makes transportation easy
• Led shadow light provides high precision cuts with greater accuracy than lasers
• 15 amp Dual-Field motor keeps the motor cooler, increasing longevity and work efficiency; 4 x 14 cross cut capacity lets you handle any cut needed for the job
• Dual bevel cutting capacity for both left and right cuts gives you more flexibility, while adjustable 0 ̊ and 45 ̊ bevel stop presets provide greater accuracy

User questions & answers

Question:	Does this miter have a depth stop
Answer:	No, I don’t think they would work on this fence.
Question:	Does it not come with a stand
Answer:	So far the work I have use this saw for is finish work which is the reason I purchased it. I am cutting ash, cherry and maple. I would recommend the SKILSAW. The contractor who was working on my home remodel asked to to use it and was impressed.
Question:	How many amps / rpm
Answer:	Good weight and nice wheels to move around
Question:	Does the saw come with brackets to mount on stand
Answer:	The only difference is the 12 comes with a higher tooth Diablo blade. The answer about "engine" size, a.) makes no sense and b.) is wrong.