13 best dental resin

Product description

7mL Bottle #6-030

• bond adhesive 6-030

User questions & answers

Question:	Can I use this to put on a tooth gem
Answer:	No it seems to hold the resin if you are using it to replace some of a tooth then use the light..if you are using to straighten a tooth chip it should work fine. Dry the area first and my best advice is to get a little paint brush to help otherwise you get too much and it burnssss when it puts too much out
Question:	Is it ok if i dont use curing light with this? Will it still be effective
Answer:	No,, I don't believe it would Bond the crown, the crown is usually bonded with cement.
Question:	Can this be used to cement a lose crown with post
Answer:	I didnt
Question:	Do you have to use an etching gel with this before use
Answer:	Boiling water or alcohol

Product description

This is lower shrinkage for dental orthdontic model, high accurate and easy for cleaning with water only. High temperature Resistance 140℃ which is possible to make orthodontic brace with therforming machine.

• Lower shrinkage & High precision, makes prints with more sharp details, specially for the tiniy figure
• Easy Cleaning, No IPA, No detergent, No cleaning device required
• Fasting Printing, 1.5-3S / Layer on LCD mono, 3-8S / Layer on LCD RGB, 1.-6S / Layer on DLP printer, Suitable on most brand 3d printers
• High temperature Resistance 140℃ (284°F), easy to make orthodontic brace
• Eco-friendly, Non VOC, RoHS, Reach, EN71-3 certificated

Product description

Easy mix rapid setting zinc oxide-eugenol cement for thermal insulation and temporary restoration. Fixation Of Crowns & Bridges, Inlays And Orthodontic Brackets Cavity Lining Under All Restorative Materials.very Low Film Thickness./ High Compressive Strength Radio-opaque And Offers Strong Adhesion To Enamel And Dentine. fixation Of Crowns & Bridges, Inlays And Orthodontic Brackets Cavity Lining Under All Restorative Materials.very Low Film Thickness./ High Compressive Strength Radio-opaque And Offers Strong Adhesion To Enamel And Dentine. Advantages This Product exhibit a number of advantages over other restorative materials. Adhesion By bonding a restorative material to tooth structure, the cavity is theoretically sealed, protecting the pulp, eliminating secondary caries and preventing leakage at the margins. This also allows cavity forms to be more conservative and, to some extent, reinforces the remaining tooth by integrating restorative material with the tooth structures. Margin Adaptation and Leakage Fluoride Release Fluoride is released from the glass powder at the time of mixing and lies free within the matrix

• Tooth Filling Kit
• High Strength , Suitable for instant fillings, bridges & caps
• Self Curing, self adherent & Universal shade
• 20 gm Powder + 10 ml Liquid + Mixing pad + Measuring Spoon + Mixing Pad + Leaflet for instructions
• Zinc Oxide Eugenol

User questions & answers

Question:	Is it for internally
Answer:	Zinc Phosphate cement when set is very hard and was used a a permanent cementing material for crowns. Zinc Oxide was used mainly as a temporary filling material. Today, dentist use newer materials with different properties.
Question:	what is the difference between zinc oxide-eugenol cement and zinc phosphate cement, can i use both
Answer:	Do not use this product on a tooth fracture. The Eugneol will interfere with the setting of dental bonding agents a dentist might use to seal the fracture. The fracture can be treated with a bonding agent and composite material. If a fracture is severe a crown may be required or sometimes a root canal is required to save the tooth if the pulp is affected. Many small fractures are benign and a simple xray can help diagnose the issue.
Question:	If I use this product to seal a tooth fracture, will the dentist be able to easily remove the material to prepare the tooth for a crown
Answer:	mix 1 scoop of powder to 1 to 2 drops of liquid. Mix in powder in increments until all is mixed. Work quickly it sets ups fast.
Question:	How to use? I lost in small instruction leaflet in the box
Answer:	Yes. I got most of my stuff on here for my gem business. You do need a dental led curing light to make them stick to the tooth. Mouth openers, cotton swabs to dry the teeth, Swarovski gems, the gem pick up tool etc

Product description

Prime

User questions & answers

Question:	Do I need to buy additional curing light for this item ? if yes which brand is suitable for this kit
Answer:	Kit totally useless. Bonding cement too dry, hard, brittle...will not stick to teeth. Discarded it. Total waste of money. Saliva dissolves bonding.
Question:	Can I use this kit for applying tooth gems
Answer:	Si, si lo es y muy buena calidad!!!
Question:	hola! me gustaria saber si esto es un relleno profecional, permanete? necesito copmpara relleno para uso profecional
Answer:	Viene todo! Resinas, adhesivo y ácido grabador
Question:	cuales exactamente son los productos que vienen en el kit, viene el desmineralizante
Answer:	Use it in your teeth, but try not to swallow any bits that separate from the filling when shaping it in your cavity. Would not recommend for use on vaginal-dentada though.

Product description

Fusion Flo is an excellent flowable composite that delivers high strength & wear resistance. It is characterized by optimum surface affinity, penetrates into most difficult area. It combines esthetics as well as flow on demand handling for use.

User questions & answers

Question:	Can this be use to attach a tooth gems
Answer:	No, it does not come with the etchant.
Question:	Does the come with etchant? is this an idea product for tooth gems? a: not really. you would need an etchant
Answer:	It is opaque. Good product.
Question:	Is it clear
Answer:	Yes, it does.
Question:	Does this require some sort of etchant pretreatment in order to bond properly
Answer:	You do need a curing light. Just buy a ddntsk curing light and you can use that for any composite you purchase

Product description

Highly polishable, 67% filled, esthetic composite used for all types of cavity preparations. The composite has a nominal particle size of 0.7 micron.

User questions & answers

Question:	What color is this A2? Is it white ? Thanks in advance
Answer:	The kit only includes the following: (4) 2g. Syringes, (20) Dispensing Tips
Question:	Is everything included in this kit or do I have to buy anything separate? Thanks in advance
Answer:	A2 is the color
Question:	What does a2 mean ? i see there are diff types a2, a3,b2,b
Answer:	Hi, it expires: 10/30/2017. I have it in stock and can be shipped right away!
Question:	Hi good evening! I want to know when expires the composites
Answer:	Yes, that's what I used it for.

Product description

****Fast Shipping Check our Reviews**** Prime Dental Auto mix Dual Cure Core Build Up Material 4 x 10g Syringe Kit A2 4 x 10 Gram Paste ( in syringe) 28 Blending Tips 28 Intra oral Tips A composite based core material designed for the easy fabrication of core build-ups. The core material is a dual cure, fluoride releasing resin core material. Provides a consistent, homogeneous mix. for precise, direct placement of core material. Available in a contrast blue shade which is easily distinguishable from tooth structure and natural (A2) shade for optimum results beneath ceramic crowns. The core material releases fluoride to help reduce secondary caries. Dual curing and quick setting eliminating time consuming layering of material and allowing for easy bulk fill. Highly radiopaque and exhibits a short settings time without heat generation.

Product description

This is lower shrinkage for dental orthdontic model, high accurate and easy for cleaning with water only. And it is high temperature Resistance 140℃ (284°F), easy to make orthodontic brace.

• Lower shrinkage & High precision, makes prints with more sharp details, specially for the tiniy figure
• Easy cleaning, No IPA, No detergent, No cleaning device required
• Fasting Printing, 1.5-3S / Layer on LCD mono, 3-8S / Layer on LCD RGB, 1.-6S / Layer on DLP printer, Suitable on most brand 3d printers
• High temperature Resistance 140℃ (284°F), easy to make orthodontic brace
• Eco-friendly, Non VOC, RoHS, Reach, EN71-3 certificated

• formulated specifically for all open source lcd printers such as phrozen, anycubic etc.
• excellent mechanical properties that produce strong but non-brittle models
• dimensional accuracy and no shrinkage for applications that require precision such as aligner models and scale models etc.
• optimized for fast, efficient and accurate printing
• easy cleaning and post curing process
• voc free, very little odor

User questions & answers

Question:	Is msds data or patent information available
Answer:	YES. ITS REGULAR A-2 SHADE OF WHITE

Product features

ApplyLabWork MSLA Resin for LED/LCD Printers

Finest print details, dimensionally accurate, fast print time, matte and smooth finish. Dental color is easy on the eyes, excellent for dental applications.

• For all LED/LCD type printers, such as AnyCubic Photon and Phrozen Shuffle
• Tensile strength (47-55Mpa) / Elongation (1-4%)
• VOC Free, very low odor
• Dental color is easy on the eyes, excellent for dental applications

Product description

Technology data:

.Capability of batterty:2200mA/h3.7v

.Working Voltage:AC110-240V 50-60Hz

.Wavelength:420-480nm

.Light power:more than 1500mw/cm

.Solidification time and depth:5s/3mm

.Large-capacity lithium battery,ultra-long standby time:90 days

.Full charging,to work for 10 seconds eachtime,can be used continuously for more than 500times



Packing list:

1 x Power unit

1 x Optical fiber

1 x Charger

1 x Light proof screen

1 x Whitening tip

1 x English Manual

• *Working modes:strong,gradually strong,flashing
• *Automatic standby/Automatic shutdown
• *Solidify all brands of resin materiais
• *5W Big power LED
• *Covered by ABS painting

Product description

These Halloween fake teeth look like real tooth and not the cheap ones in market, suitable for dental and lab use, also for artwork and Halloween party cosplay, these dental acrylic resin teeth can meet your different needs.



Color: white

Material: acrylic resin



Package includes:

168 x Halloween fake teeth

• Total 6Sets 168pcs
• Material: Resin
• Realistic looking, used them for a makeup look.

• Color: A2.Material: Acrylic Resin
• Acrylic resin teeth,they are not crowns,they are not hollow, and solid.
• Acrylic resin teeth can repair dental defects or make full dentures,but need eed to be used under the guidance of a professional dentist.
• Please note it is 3 set a box(28 teeth/set)
• It is suitable for dentists to make complete dentures or single dentures for patients, DIY Study Model or used for Halloween Horror Prop

User questions & answers

Question:	Please, I need a good glue, some advices
Answer:	Hi! My hubby placed one tooth on a partial. He used gorilla glue... hope this helps!
Question:	how do you keep them in your mouth? what do you use to affix them or multiple teeth
Answer:	They don’t clip on. They are solid. I used them to make a makeshift crown for the one I lost. I used these teeth and a small grinder to fit them to my mouth, and then affixed the missing one to a molded plate I made with dental beads. Worked wonderfully and no one can tell the difference.
Question:	Do they clip on your teeth? If you’re missing teeth how do they work
Answer:	No, they will not stay in place. My brother trashed his because he wasn't sure how to get them to stay in place. If you have a tooth still in place next to the missing tooth look for, "Polly Plastics Moldable Plastic Pellets." It is a mold. You have to use hot water, and be quick. But it stays into place! Also, when you are ready to remove the mold, you have to make it hot, to remove it. Out of everything my brother has tried, this has worked the best.
Question:	I have other missing teeth. Will these stay in? What do I use to secure them in
Answer:	Hi Emib, Thanks for your question. You may find related information (MSDS) by visiting our website: https://www.applylabwork.com/material-safety-data-sheet/ ApplyLabWork

Product features

PRODUCT SIZE:

• 28 teeth/Set.(Upper teeth : 14pcs, lower teeth : 14pcs)

Product description

AZDENT premium quality denture tooth,made of selected medical material,not the cheap ones in market.



Please note that these tooth are solid,which works perfectly for denture,emergency tooth problem,also for arts and crafts,etc.



If you have any problem about the item,pelase contact.

• High quality synthetic Resin material,look like real tooth,perfect for dental/lab use,also for artwork,not the cheap ones in market.
• T8,L8,34U,34L,A2
• Low affinity to plaque
• Minimum water absorption
• 1 box include 4 suits,1 suit include 28 pieces

User questions & answers

Question:	How many teeth come in this set? it says that "1 box include 4 suits,1 suit include 28 pieces," does that mean there are 112 pieces per box
Answer:	T8 size is 10.3mm in height (not including the upper "neck) and 8.7mm wide for the central upper incisor; the six upper fronts which includes the canines total width side-by-side = 46.8mm. Nbr 34 posteriors have a 28 degree angle. I don't know what the other individual teeth measures are of these Huge Dental Kaili series, but if there was way to post a picture with these answers. then it would be easier to examine the dimensional differences. Denture teeth are made in different shapes: in this case T = tapered, and those marked S are square. As for color, one should look into the differences between A1 and A2 as well as B1 and B2 shades. Example of shades from A1-D4: 1. A1-A4 reddish-brownish 2. B1-B4 reddish-yellowish 3. C1-C4 greyish-shades 4. D1-D4 reddish-grey If the color you need is not available, there are acrylic resins in tooth shades like Lang's Jet Tooth Shades and Jet Set-4. Be aware that Methyl methacrylate (or PMMA) is toxic to cells/stem cells. Soak in water for a day or two, to reduce this effect, however I don't think it can be eliminated. BTW: if this toxicity is of concern, realize that most filling materials contain Methyl Methacrylate. For further info, for examples, search "cytotoxicity and acrylic resins "cytotoxicity and denture base resins" and "cytotoxicity and oral prosthesis". Not much else I can add here, hope this enough to be helpful.
Question:	what size are they
Answer:	Hola, tenemos A3 en stock, no dude en enviarnos un correo electrónico a traves de [email protected] para obtener más detalles, gracias.
Question:	Esta disponible en a
Answer:	They are just the loose teeth. Several sets as a matter of fact. I also purchased a container of temp tooth plastic which gets soft in very hot water. I made a denture from the plastic and glued the teeth I needed for prosthetic into the temp tooth plastic denture with gorilla glue. So I made my own denture prosthetic and these were just a component of it. It works good, I can eat and everything else with it just like a normal denture but I was able to make it for less. About $60 in parts.
Question:	how do they stay in your mouth.? what do you need for them to stay in
Answer:	Watch FX vampire teeth on YouTube. Make or get plaster copy of teeth. All supplies can be bought here. Also get pink dental acrylic. It is mixed and applied like acrylic nails. I’ve started making my own dentures too.