13 best porter cable scroll saw

Product description

The PCB375SS features a broad 12-5/8" x 20" aluminum dual tilting table, enabling 45 degrees left and 15 degrees right bevel cuts for a range of accurate cut angles visible on a scale conveniently and securely situated in the tabletop. An upfront tool-less blade holder and a cam action blade tension adjustment allow woodworkers to quickly and easily change and regulate pin or plain blades. It also includes an upfront on/off switch that simplifies speed control changes between 500-1,500 SPM, a die cast aluminum frame, and a large cast iron base that reduces vibration in cutting heights ranging from 2-1/4" (45 degrees right) and 1-1/4" (45 degrees left) to 2-1/4" (maximum cutting height). The saw includes blade storage and a study steel stand.

• Large aluminum 20" x 12 5/8" dual tilting table allows for bevel cutting up to 45 degrees
• Patented table top bevel scale for accurate and convenient readings
• Tool-less blade holder makes quick and easy 5" pin or plain end blade changes
• Built-in adjustable LED work lamp for better illumination of work area
• Variable speeds between 500 and 1500 SFM with upfront control knob

User questions & answers

Question:	What type of blade does the 375 use
Answer:	The shapton 16000 grit flattening Stone comes flat right out of the box and it doesn't need flattening for a while and this year sharpening knives on it or something
Question:	Can the unit be operated on a benchtop without the stand
Answer:	Shapton glass stones are arguably the best sharpening stones on the market. The 16000 stone is for polishing not sharpening and it will polish Damascus steel without a problem. These stones are rated to sharpen and polish steels of all Rockwell hardness. When considering what stones to use it isn't a matter of Damascus or not it is all about the hardness of the steel and Shapton stones have you covered.
Question:	Needing to know the dimensions of the box? Will it fit in back seat of a car like a chevy cruze? Gonna buy locally cus its cheaper than amazon
Answer:	They come in 36 and 80. the 36+ in the lower left is the grit. They both work well but don't last a super long time under heavy grinding. They are best saved for times when tight space filing is needed. Good luck, Arty
Question:	How easy is it to unhook and rehook blades for doing inner cuts
Answer:	The tool can be either electric or pneumatic, what matters is the width and length of the tool. These are for a 1/2" x 18" file tool and the difference is the grit of the file belt itself, you have 36, 60, and 80 grit belts. I personally recommend the 60, and 80 grit belt files as the 36 wears out much faster.

Product features

Innovative table top bevel scale for accurate and convenient readings

Upfront controls for variable speeds, on/off and LED work light.

Includes:

Scroll Saw, Stand, 5 inch Pinned Saw Blade, Hex Key, Instruction Manual.

Table Top Bevel Scale

Innovative table top scale allows for accurate bevel angle readings without having to look under the table.

Large Work Table

Large, stable die-cast aluminum table tilts for bevel cutting angles from 45° right and 15° left.

Upfront Control Knob

Controls for on/off, speed adjustment, LED work light and dust blower are conveniently located in front and top of the saw.

Variable Speeds

Variable speeds for cutting a wide variety of materials such as plastic, aluminum, soft and hard woods.

Quick Tool-Free Blade Changes

Cam locking blade tension lever means faster blade changes.

LED Work Light

Adjustable light provides added illumination to the work area.

SawDust Blower

Adjustable built-in dust blower clears the cutting path of ahead of blade.

Product description

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

User questions & answers

Question:	Is the pinless adapter upgraded in this model
Answer:	Yes
Question:	What’s the difference between this and the
Answer:	The difference is toolless or tooled blade changes. That's the only difference I found in the 2 units.
Question:	What blades are you all using
Answer:	I use spiral blades which, unlike regular flat blades, you can cut by pushing and pulling your piece being cut.
Question:	I am new to scroll saws so have to ask. Is it worth the $40 difference in price for the 3921 over the 3920 and why
Answer:	this model(3921) replaces the 3920, they added a few features and the pinless clamps to the mix. the price difference is for the design changes and the extra pieces they add. 3921 is better than the 3920 when you count in the extra features.
Question:	does it come with sand paper
Answer:	Ours didn't. But just cut a full sheet in half and half again. Love how well it works.
Question:	is it ok to use on an old desk? I am concerned about the circar pattern of this sander, I won't be able to follow the grain of the wood
Answer:	It's a small orbit, about 1/16", like a vibration. For $30 give it a try. If you use fine paper on the last pass and move the sander in the directionof the grain, should be ok. I think it's agreat little tool.
Question:	What about the cutted sections in the sandpaper
Answer:	Hi, Put the sandpaper section on the sander. The sander came with a black square item that has spikes. Push the sander over the spikes and the holes in the sandpaper will appear. Also the holes are only needed if you want to collect the dust in the bag. I do not use the collection bag.
Question:	Where do I find refills online for the 1/4 sheet
Answer:	What is "Full Sized Sheet"? , I see 8 1/2 x 11 and 8 x 10.

Product features

BLACK+DECKER BDEQS300 1/4-Sheet Orbital Sander

The BLACK+DECKER BDEQS300 1/4-sheet orbital sander is ideal for finish sanding and detail work around the house. This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal. This sander offers high-performance dust collection to provide a clean work surface.

Versatile

This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal.

Convenient

This sander features paddle switch activation for easy on/off during application.

Ergonomic

With a compact size and ergonomic design, this sander can get into tight spaces and maximizes user control.

Efficient

Ideal for detail work and finish sanding, this sander also offers high-performance dust collection to provide a clean work surface.

Beveling Table

The spacious table features a 16-inch depth for cutting large workpieces and bevels up to 45 degrees to the left.

Blade Variety

Whether your preference is pinned or pinless blades, the WEN 16-inch Variable Speed Scroll Saw handles them both.

Variable Speed

Variable speed can be adjusted anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.

Flexible Worklight

The flexible worm work light can be adjusted and moved to illuminate workpieces of any shape and size.

Product description

The PORTER-CABLE PCE345 6 amp Orbital Jig Saw is designed with a 7 position speed dial (0-3200 rpm) integrated into the trigger which provides multiple speed settings for optimal cutting results. The 6 Amp motor delivers more power in demanding applications, and the 4 orbital settings provide best cutting performance in a variety of materials. It offers a lock-on button that provides easier control during prolonged use, and help to diminish user fatique, along with an oversized front and handle overmold that provide greater control and comfort during use. This jig saw also offers tool-free blade change to make blade replacements fast and easy and minimize down time.

• 7 position speed dial integrated in the trigger
• 6 amp motor for more power
• 4 orbital settings for a variety of materials
• Lock-on button for prolonged use
• Tool free blade change

User questions & answers

Question:	Is it 110V only
Answer:	I don't know without digging it out of the garage, but I don't remember mine having a laser on it. Maybe you have another model than mine
Question:	Does the saw take U-shank or T-shank blades
Answer:	Yes
Question:	Dose this tool have a case , if so how much will it cost & and where can I buy it
Answer:	That might depend on the thickness and type of plastic. Very thick, dense plastics with a low melting point might melt a bit. Most wouldn't melt. Glass, is not really suited to this kind of cutting tool, besides it is usually scored and cracked apart. If you need curves in glass, score the curve once and make radial scores away from the curve and break it off in smaller sections.
Question:	Im cutting inch thick trim thats in place can i set the blade cutting depth
Answer:	It does not come with a case.

Product description

The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.

• [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
• [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
• [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
• [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
• [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
• [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut

User questions & answers

Question:	What is the difference between this unit and the RK7321 BladeRunner
Answer:	It is a 30mm arbor. You have to get metric sizes in blades.
Question:	how would it work w/ making pinewood derby cars
Answer:	the tacklife saw blade has that size arbor ans 120 teeth
Question:	Can it hold up to regular use with 1" hardwood like maple and ash? If not, what will
Answer:	Yes, it can be replaced.
Question:	Is the table made from plastic? It is hard to tell if it is made from black plastic or anodized aluminum
Answer:	No it is not.

Product features

Adjustable Miter Gauge

Make cuts from 0-60° so you can tackle all common woodworking projects that require miter cuts.

Accessory Storage in the Base

For easy transport and organization, just pop the rip fence, miter gauge, and extra blades into the bottom when not in use.

Portable and Powerful

A table saw that you can take with you to the job or easily move around the workshop. Convenient carry handle makes it easy.

Capability of Larger Table Saws

Rip, cross, scroll, and miter cuts are all possible thanks to the standard guard and riving knife system.

5 Blades Included

Wood, ceramic, plastic, aluminum, and metal. Plus, the tool-less blade change system accepts any brand’s standard 4” T-shank blades.

Weighs Only 15 Lbs. for Easy Transport

Throw it in the back of the truck and take it to the job site. That’s not something you can do with a traditional, permanently installed table saw. Saves time when you don’t have to bring materials back and forth between the workshop and worksite.

Make Miter Cuts 0-60° for a Wide Range of Projects

Even though it’s compact, this saw features a standard guard and riving knife system to give you the flexibility and performance of larger table saws. And 5 blades are included to get your started right out of the box.

Product description

Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long

The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.

Unique Arm Design for Accurate Cuts

A scroll saw needs to perform both reliably and accurately, whether you're crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw's double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.

This unique arm design also works to keep the saw's blade perpendicular to whatever you're working on, reducing the chance of over cutting or under cutting.

Easy to Handle with Variable-Speed Control

Adding to the saw's intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw's on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw's flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.

The scroll saw's electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.

Save Time with Tool-Free Blade Changes and Adjustable Table

Whether you're working with a variety of specialty materials or you're simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.

Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw's oversized, cast-iron table provides excellent support no matter what you're working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.

This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.

• Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
• Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
• On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
• Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
• Arm lifts so blade can be easily threaded through the material for inside cuts

User questions & answers

Question:	Does this saw come with the stand
Answer:	no stand comes with the saw check out harbor freight thats where i purchased my stand and light for about $75which work very well but i did have to use a 2x12 board to mount to the stand.
Question:	How thick of a hardwood piece can this cut with ease
Answer:	The thickest that I have cut is about an inch and a quarter hardwood, had no problem, I believe you could even thicker if you took your time and not push it real hard and use sharp blades! Hope this helps !!
Question:	Has anyone used this saw for pinewood derby cars? Is it powerful enough
Answer:	I would say no. This saw is designed for small flat wood. To cut out pinewood derby cars I would suggest a nice bandsaw.
Question:	How can I tell if my 788 is made in Canada or in Asia
Answer:	Your can contact DeWalt at 1 800 433 9258DeWalt is now a popular brand of tools for commercial contractors. In 2002, DeWalt ceased all tool manufacturing in the USA and moved manufacturing to China, Mexico, Thailand, Japan and Korea. In 2004, Black and Decker bought rival power tool manufacturer Porter-Cable and combined it with DeWalt in Jackson, Tennessee.

Product features

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right.

Product description

Perfect For Hobbyists, Jewelers, Crafters And Do-It-Yourselfers! After 25 years in production, one of the most popular MicroLux saws ever offered has been re-engineered, making this already great saw better than ever! This is one of the few power saws in the world that can use coarser coping saw-type blades and ultra-fine blades for the finest cuts you've ever seen! It is the power saw you've been waiting for . . . re-designed and sized for hundreds of small projects. Cuts just about everything from balsa to pine, basswood, cherry, walnut, mahogany and other exotic woods to light gauge, non-ferrous materials…copper, brass, silver and other precious metals, aluminum, and plastics. It will even cut styrofoam without shredding or tearing! Made in Japan for Micro-Mark, Multi-Saw features a 90 watt (1/10 hp) motor which runs on 110VAC household current. Variable speed: 500 - 1,700 strokes per minute. Overall size: 12" high x 13-1/2" wide (with vacuum adapter installed: 9-1/2" without adapter) x 19" deep. Weight: 7 lbs. Table size: 6-1/4" x 6-1/4" cast aluminum with smoothly machined surface. Multi-Saw cuts soft woods up to 2" thick, hard wood up to 1/2" thick, printed circuit boards and non-ferrous metals up to 5/64" thick. MicroLux Multi-Saw includes 6 premium blades: 2 fine (#80856) and 2 medium blades (#87937) for wood, plastic and metals such as aluminum, brass, silver, gold, plus 2 coarse blades (#80857), primarily for wood cutting; adjustable rip fence; 0 to 90 degree miter gauge; 2 C-style bench clamps for mounting the saw on work surfaces up to 1-7/8" thick; assorted mounting screws; extra-long hex key and set-up instructions.

• Almost twice the stroke length - increased from .200" to .375" (3/8")
• Integrated blower device provides a clean view of your sawing line
• Elbow-jointed overhead yoke arm provides easy, fast (45 seconds or less) re-positioning of material being sawn; ideal for making complex interior cuts
• Larger-size side compartment with tool-less push-button removal mechanism
• Improved vacuum port attachment design.

User questions & answers

Question:	Can this saw be used to cut fine curves on thicker cardboard
Answer:	Go to their website and check out all the YouTube videos.
Question:	Would this cut mother of pearl for inlaying fretboards on guitars
Answer:	Currently we are unable to offer free shipping and our products are currently not prime eligible either.
Question:	how can you grip a bead to cut in half
Answer:	Raphael, Thank you for your interest in Stone Coat Countertops. Our normal Stone Coat Countertops epoxy is designed to be poured at 1/8" or less and provides great heat and scratch resistance. Give us a call to discuss the details of your project, filling larger voids, and our casting resins (541) 450-1976. We offer free project support anytime. We look forward to hearing from you!
Question:	What size blades does this saw take
Answer:	I wouldn't recommend this. If there is an existing backsplash on your wall that is attached to your countertop you can coat it with effects like you would on your countertops. There are tutorial videos for that. Or you could just get peel and stick tile to add to the backsplash area AFTER you epoxy countertops then seal with silicone.
Question:	Just received saw and arm is very stiff and hard to lift and lower. Will this improve in time? Can I add some wd 40 at the swivel point of the arm
Answer:	Once the clear top flood coat is applied and has cured then you are going to have a sealed smooth non porous surface when you are all done. We have applied top coats over our flood coat in the past and found that there was no added benefit for doing so.
Question:	does it come with the stand and the floor petal
Answer:	Our 1 Gallon Kit is enough material for 20 square feet of coverage. That does include being able to lay down your decorative flood coat and then coming back 24 hours later and pouring your clear top flood coat as well. You will have enough material for both coats for 20 square feet.
Question:	What kind of blades does this one use? Pin-end or plain end blades
Answer:	No , is 8 1/4 + 2 3/4 exact.
Question:	Is it still made in taiwan or made in Mainland china
Answer:	You use the ceramic side.

Product description

16” Scroll Saw with Light is manufactured with an electronic variable speed control to easily cut a variety of materials plus a 16” throat for cutting thicker pieces and a tilting 16”x10” work table tilting 0-45 degrees for precise cutting results. Features an integrated dust removal system for a cutline free of debris, a 1-1/2” dust port allowing work area to stay clear of dust and an articulating LED work light ensuring work piece is clearly lit. Includes convenient on tool blade storage keeping blades handy when needed and a keyless blade change for hassle-free blade changes. Product is sold with blades.

• Integrated dust removal system keeps cutline free of debris
• Articulating LED worklight ensures that the work piece is clearly lit.1.5 inches Dust port keeps work area clear of dust
• Electronic variable speed control helps cut a variety of materials
• Tilting 16" x 10" work table tilts 0-45 degrees for precise cuts
• 16" throat allows for cutting thicker pieces

User questions & answers

Question:	I have tried to find this scroll saw at the skil site and can not find this or any scroll saw. is this still in production. tia
Answer:	Once fully cured SCC Epoxy has a heat resistance up up to 475 degrees.
Question:	Would this saw cut 1/8 thick Aluminum
Answer:	SCC Epoxy has a heat resistance up to 475 degrees when fully cured.
Question:	Where can I get parts for this saw
Answer:	stonecoat counter top sells base tint
Question:	Is this by directional
Answer:	do not know as we used stone coat and loved the final product.

Product description

Variable speed 16 in. scroll saw includes an air pump to clear away sawdust as you cut. Our variable-speed scroll saw does a beautiful job cutting highly intricate curves and designs quickly and precisely. This versatile scroll saw has a tilting table for making precise bevel cuts. A built-in air pump keeps your line of sight clear of sawdust to help you make detailed scrolling cuts. This scroll saw has a cast iron base for less vibration and variable speed control for working with a wide range of materials. Accessories Included: Blade, two blade adapters, hex keys

• Sold on Amazon

User questions & answers

Question:	What is the length of the blades
Answer:	We do not offer replacement jaws for other manufactures vices.
Question:	does it work on metal
Answer:	Nope, it does not swivel... Which I like because it's one less thing to break. Great industrial strength heavy-duty vise.... Highly recommend!
Question:	Does it cut Kydex/plastic
Answer:	After thirty days it is said to cure to heat resistance. I haven’t had any problems with spilled grease and run the crock pot and air fryer directly on the counter with no problems. I used a less heat resistant product on my island as I did it first and didn’t know differently and everything hot sticks to it so this product is better by far
Question:	What is that straw coming out from the top and pointing at the blade
Answer:	We use Acetone to clean up the epoxy when it is still wet. We let the epoxy dry in our mixing buckets, but we tip them on end, then when it's dry it can be peeled out of the smooth plastic bucket. The brushes can be cleaned in acetone or only used once. If the epoxy is dry, heat up the dried epoxy with a heat gun or blow dryer, then use a scraper or flat head screwdriver to pull up if it spilled on the floor.

Product description

The Bucktool Model SSA16LVF 16-Inch Scroll Saw is perfect for any woodworker that’s looking for a quality scroll saw at a reasonable price. The 9-Inch by 16-Inch cast iron table tilts 0-45 degrees for greater stability and low vibration.

The Bucktool SSA16LVF Scroll Saw provides the user with the flexibility to work with a variety of materials. Well designed blade holders can make sure long life of blade and easy changing at this price level. New side panel with quick open door for easy hand access to change blade.

Fixed LED in the front ensures a vibration-free lighting. A flexible dust blower can blow at any direction for better sawdust removal.

The speed of the 5-Inch blade can be varied from 550 to 1650 strokes per minute. Cutting depth is 2-Inch with a 16-Inch throat depth. With pedal, switch operate your tools with hands-free convenience and easily stop tool with the tap of your foot when you need to drill a new hole, change blades, or if an emergency occurs.

• Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth Performance
• LED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
• Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
• Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
• Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth

User questions & answers

Question:	where is it made and how does it compare with excalibur and the like
Answer:	Using a massage stone heater, soak in to above the surface of the stones arranged in single later. Use distilled water to avoid mineral precipitation. Set the temperature to pre heat. I use a meat thermometer and set the alarm at 125 degrees F then turn the heater temperature knob counterclockwise to normal then stoned are ready for use. Turn off and unplug after use for cleaning.
Question:	What the warranty on the buck scroll saw
Answer:	An user instruction is included.
Question:	What is the actual weight of just the saw (not packaged weight)? This is for my wife who will need to move it aroung the house and garage
Answer:	It holds heat for around 10-15 minutes after sufficient heating.
Question:	can you cut aluminum with this saw
Answer:	Thank you for contacting Irwin Tools. We strive to give the highest quality of customer service. We only recommend using Irwin replacement jaw plates on the Irwin vises.

Product features

Are you looking for a powerful variable speed scroll saw?

The Bucktool Model SSA16LVF 16-Inch Scroll Saw is perfect for any woodworker that’s looking for a quality and powerful scroll saw, provides the user with the flexibility to work with a variety of materials.

Product Information:

· 1.2-Amp DC Motor

· Table Bevel: 0°- 45°

· Table Size: 9 x 16 inch

· Blade Size: 5-inch pinned & pinless

· Blade Speed: 550 to 1600 SPM

· Cutting Depth: 2 inch

· Throat Depth: 16 inch

INSTALLATION OF NEW SAW BLADE PINLESS

1. Release the blade tension by lift up the blade tension handle.
2. Unscrew the inner hex nut of upper blade holder by TURN CLOCKWISE.
3. Open the side cover plate.
4. Unscrew the inner hex nut of lower blade holder by TURN CLOCKWISE.
5. Install the blade in lower blade holder and fasten the nut by wrench in ANTI CLOCKWISE.
6. Install the upper side of blade to blade holder, fasten the nut by wrench in ANTI CLOCKWISE.
7. Gently push down the blade tension handle and try the tension of blade . Adjust the tension by turn the handle. Tighten by clockwise and loosen by anti clockwise.

INSTALLATION OF PIN BLADE

1. Release the blade tension by lift up the blade tension handle.
2. Hang the blade on the lower blade holder.
3. Hang the balde on the upper blade holder .
4. Tighten the blade tension handle and try the tension of blade . Adjust the tension by turn the handle .Tighten by clockwise and loosen by anti clockwise.

Product description

Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. The Shop Fox Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45-degree tilt table and easy blade changes.

• 1/8HP, 1.2-Amps, 110-Volt, 60Hz motor
• 16-Inch maximum cutting width
• Includes a gooseneck work light, dust blower and dust port
• Plain or pin blades
• No load speed: 550-1700 SPM

User questions & answers

Question:	Well this cut O-1 steel 3/16ths thick
Answer:	I think the saw would handle it but you would smoke the blade. I cut some 1/2 Black Oak with my saw and the going was slow.
Question:	Will this work well with cutting 1.5" to 2' thick dried oak on a consistent basis
Answer:	I wouldn’t recommend it. Mine lasted about 3 months just cutting plywood.
Question:	For small projects (like puzzle making) would a respirator, an air purifier and a shop vac prevent dust problems if the saw is used indoors
Answer:	I think you pretty much have it covered, the Scroll saw does not make a lot of fine dust so most of it would be picked up with the shop vac, the Air Purifier is a Plus and a respirator will protect your lungs. other than that there may be residual dust that gets on the floor but not much.
Question:	What brand of scroll saw blades can this machine use? I just ordered it. THank you Fay
Answer:	We got the Proxxon 02815 set from Amazon (18 pieces), consisting of 28740, 28742 and 28744 scroll Saw Blades for DSH Coarse Pin End Blades, very satisfied with them.

Product features

Shop Fox W1713 16" Variable Speed Scroll Saw

Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. The Shop Fox Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45° tilt table and easy blade changes.

Table Tilt

The Shop Fox Scroll Saw offers the ability to cut at angles from 0-45-degrees with the table tilt mechanism. The table lock knob and tilt scale are used to tilt the table for horizontal angle cuts.

Keep your saw running smooth and your shop clean by connecting the 1-1⁄4 inch dust port of your scroll saw to a shop vacuum to keep the wood debris from accumulating underneath the table insert.

Plain and Pin-End Blade Compatible

The W1713 accepts standard plain or pin-end saw blades and is designed to make blade changes easy with the included adapters.

A adjustable hold-down shoe prevents the workpiece from rising up with the force of the moving blade while the air nozzle blows air at the cutting location to keep wood debris away from the line of the cut.

Product description

After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.

Motor: 1.3 Amp



Speeds: 400-1,750 SPM



Capacity: 20 in.



Stroke Length: 3/4 in.



Table Size: 16 in. x 24 in.



Table Tilt: 0°-45°, Left and Right



Cutting Capacities: at 90°: 2 1/8 in. at 45°: 1 5/8 in.



Assembled Depth: 39 in.



Assembled Width: 16 in.

• Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
• Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
• Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
• Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
• On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
• On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades

User questions & answers

Question:	Does this saw come with a stand
Answer:	NO! Even though Delta and DeWalt are very similar, The DeWalt stand has to be adapted to fit the Delta saw. Takes a few minutes.
Question:	What is the 'thing' on left side? How easy to change blade, need a tool? Disappointed no light, any available
Answer:	That black tube thing on the left is an adjustable hose that blows puffs of air (generated I think from the up and down motion of the upper arm) which will help keep your lines clear of sawdust. Changing blades is a snap, simply loosen the thumb / wing screw on the top arm and the lower holder and slide out the blade. As for the light, I make due with a shop lamp that I have hanging from the ceiling of my garage. You can check woodcraft or rockler for magnetic portable lamps that may stick to the saw somewhere - not sure if its magnetic everywhere, never tried
Question:	The saw is great but I can not get the hold down to stay in place. I move the wood and it also moves. Any thoughts
Answer:	I removed mine even though it held just fine as I found that it got in my way. This was after I'd gotten used to the saw and the forces involved. I haven't had an issue using it without the hold down, but you have to do the holding down.
Question:	There's such a price difference, what's the main difference between this saw and the dewalt dw
Answer:	Only difference is some of the outside sheet metal, the inner workings are the same. You are paying for the Dewalt name. They both used to owned by the same company.

Product features

LOW VIBRATION, HEAVY DUTY CONSTRUCTION

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOW VIBRATION & BUILT TO LAST

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. · On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

ENORMOUS CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

HUGE CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

AND MUCH MORE

• THE SPECIFICATIONS ➤1.2Amp Pure copper motor, 16 Inches Scroll Saw, Variable speed goes from 500 to 1700 SPM. Variable speed options, large-size worktable, and pure copper motor power are enough to cut various types of wood.
• FOOT SWITCH & GRINDER ➤Besides ordinary switches, TACKLIFE scroll saw also has a footswitch, which can freely control the speed during cutting and sanding work. The scroll saw with a sander is equipped with 31 sanding accessories for the final step of making great artwork. The variable speed of the grinder goes from 2400 to 4500 RPM.
• 45° BEVEL CUTTING ➤Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts. The cutting depth of the table at 90° is 2.2 inches, and the cutting depth of the table at 45° is 1 inch.
• MULTIFUNCTION ➤Tool-free blade changes, a cast iron base, an air pump, a LED light, a dust port, a footswitch, flexible shaft grinder, onboard storage, and four blades. All these functions are just for you to have a better cutting experience.
• WARM PROMPT ➤For the better user experience, when using the electric grinder function, please fix the scroll saw on the stand before using, to prevent the running saw from causing danger. Please wear working headphones to reduce the working noise.

User questions & answers

Question:	Does this saw come with the stand
Answer:	No it does not come with a stand. You have to buy one or make one your self.
Question:	how heavy is the machine
Answer:	It is 13800g.
Question:	Is the base Metal or Plastic, it looks like plastic
Answer:	It seems to be cast metal.
Question:	How loud is it competing to other devices
Answer:	Very similar, not especially loud or quiet

Product features

TACKLIFE -The Future of Tools.

At TACKLIFE, we aim to create the best products that inspire our consumers to live a more convenient, secure lifestyle. We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products. As important as the high quality of products, is our attractive design. We always lead the path of similar companies to provide you with all the convenience at a revolutionary quality.

BLADE VARIETY

TACKLIFE 16-inch Variable Speed Scroll Saw equipped with two pinned blades and two pinless blades to prevent accidental damage to the blade.

FOOT SWITCH

When need two hands to move the wood, the footswitch may become an indispensable tool. Then the cutting speed can be controlled at will.

LED WORKLIGHT

The flexible work light can be adjusted and moved to illuminate workpieces from several angles.

DUST PORT

The universal dust port is suitable for vacuum cleaners in the homes of most woodworking enthusiasts and can vacuum efficiently.

WORKTABLE SIZE

16.3*10.0 inches worktable can put a larger size of wood, and also easy to move wood when cutting.

AIR PUMP & BLADE PROTECTION

We could see the cutting line more clearly after the air pump blew away the dust;

The blade protection can protect the saw blade and extend its service life.

Product description

PORTER CABLE PCC650B 20v MAX Lithium Bare Jigsaw features 3 orbital settings which can easily adjust the cut aggressiveness across wide range of applications. It also features a variable speed trigger (0-2,500 SPM) which provides control for clean and accurate cuts. The integrated dust blower clears debris for better visability. It also has a tool-free blade release that allows for quick and easy blade changes, along with a beveling shoe that provides the ability to cut 0 to 45 degree bevel cuts. The contoured overmolded handle optimizes increased comfort. Applications include: Straight and scroll cuts in wood and metal, Bevel cuts in wood, Sink cutouts, Cutting PVC pipe, Cutting up to 1.5" copper pipe. This tool is part of the 20V Max System - a high performance cordless platform. (This is a bare tool item - battery sold separately). Includes: PCC650B Jig Saw and 4" Wood Blade.

• 3 orbital settings
• Variable speed trigger (0-2,500 SPM)
• Tool-free blade release
• Dust Blower clears debris for better visability
• Part of the 20V Max System

User questions & answers

Question:	Do the 18v PC batteries fit this
Answer:	If you're referring to 18V NiCaD Porter-Cable batteries, probably not. The batteries must fit the 20V Max tool battery interface--that's the important key. Stanley holds the patent on 18V and 20V LiON tool batteries. 18V lithiun really is the same as The 20V LiON--20V lithium tool batteries available for Porter-Cable, from Stanley and 3rd parties, is just pumped-up marketing for actual 18V. Porter-Cable was purchased by Stanley some years ago--the point is moot. Kobalt put out 24V lithium tools--simply to bypass Stanley's royalties and legal hassles for 18-20V lithium batteries.....
Question:	Are the 18 volt lithium ion batteries usable on the 20 volt systems and vice versa
Answer:	Each tool and battery has a configuration to only allow the right battery to be inserted.18 and 20 are not interchangeable.
Question:	Does this jigsaw comes with a built-in LED light
Answer:	MY SAW DOES NOT HAVE A LIGHT.
Question:	does this saw use U-shank or T-shank blades
Answer:	It uses T-shank blades.