10 best dewalt scroll saws

Product description

Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long

The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.

Unique Arm Design for Accurate Cuts

A scroll saw needs to perform both reliably and accurately, whether you're crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw's double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.

This unique arm design also works to keep the saw's blade perpendicular to whatever you're working on, reducing the chance of over cutting or under cutting.

Easy to Handle with Variable-Speed Control

Adding to the saw's intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw's on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw's flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.

The scroll saw's electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.

Save Time with Tool-Free Blade Changes and Adjustable Table

Whether you're working with a variety of specialty materials or you're simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.

Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw's oversized, cast-iron table provides excellent support no matter what you're working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.

This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.

• Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
• Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
• On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
• Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
• Arm lifts so blade can be easily threaded through the material for inside cuts

User questions & answers

Question:	Does this saw come with the stand
Answer:	no stand comes with the saw check out harbor freight thats where i purchased my stand and light for about $75which work very well but i did have to use a 2x12 board to mount to the stand.
Question:	How thick of a hardwood piece can this cut with ease
Answer:	The thickest that I have cut is about an inch and a quarter hardwood, had no problem, I believe you could even thicker if you took your time and not push it real hard and use sharp blades! Hope this helps !!
Question:	Has anyone used this saw for pinewood derby cars? Is it powerful enough
Answer:	I would say no. This saw is designed for small flat wood. To cut out pinewood derby cars I would suggest a nice bandsaw.
Question:	How can I tell if my 788 is made in Canada or in Asia
Answer:	Your can contact DeWalt at 1 800 433 9258DeWalt is now a popular brand of tools for commercial contractors. In 2002, DeWalt ceased all tool manufacturing in the USA and moved manufacturing to China, Mexico, Thailand, Japan and Korea. In 2004, Black and Decker bought rival power tool manufacturer Porter-Cable and combined it with DeWalt in Jackson, Tennessee.

Product features

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right.

Product description

This DEWALT scroll stand is a great accessory to have when you don’t have a lot of work bench space and you’re looking for a sold surface for you DEWALT DW788 scroll saw. Ruggedly crafted with holes at the base so you can bolt the stand to the floor, this stand is built to last in even heavy duty applications. It’s built from all metal can be simply orientated to the height you need with the rear adjustable legs.

From the Manufacturer

DEWALT DW7880 Scroll Saw Stand

• Sturdy, lightweight stand
• Robust all-metal construction
• Adjustable legs allows height adjustment for optimum comfort

User questions & answers

Question:	I am buying the dewalt 788 scroll saw in looking at this stand i find i cannot sit at it. can anyone recommend a stand brand that i can sit at
Answer:	Not sure why you would use a mask on the laser cutter. This is a temporary adhesive. I have used it while cutting .75-1.0 inch thick hardwood and the blade gets very hot. I had no issues removing the product due to the heat but I also control my speed to avoid burning so this is no where near your temperatures.
Question:	Will this work with wen scroll saw 24x11x
Answer:	Probably not. It’s sticky on one side to apply it to the wood, then the paper is peeled off the other side to attach the pattern. The sticky side won’t go through your printer.
Question:	I ordered through Amazon. It didn't have any bolts in the box (which was damaged upon arrival). If you ordered through Amazon did you get bolts
Answer:	not exactly sure, as long as the wood i apply it to is good n smoothe n dust free it does good holding my patterns to the wood while im scrollsaw cutting, i would say try it with a small scrap piece first and see how it does for you.
Question:	Can anyone tell me what the assembled height (floor to table) is for the scroll saw when it is mounted on this stand
Answer:	Sorry the Lifter will not work on the Delta 40-694. It only works on the Dewalt 788 and the Delta 40-690. The Delta 40-694 has a built in mechanism for holding the saw arm in the up position. Frank - Papa's Workshop
Question:	Do these fit any scroll saw
Answer:	The Dewalt scroll saw arm will not stay in the UP (raised) position by itself. This makes it difficult to move your blade to a new position for an different interior cut in your project. The LIFTER is an accessory for the scroll saw that allows you to latch the saw arm in the UP position when you need to. Then you just unlatch the LIFTER and lower the saw arm so you can continue to make cuts in your pattern. Many folks, including myself, used to prop up the saw arm with a block of wood. Now we don't have that problem anymore. Thanks Frank Carey - Papa's Workshop
Question:	Can i order just the number 5 one
Answer:	Bill, thanks for the question. What you're suggesting does work - sorta. Here's my thoughts. When you tighten the screw enough to hold up the arm, then there is added resistance when you want to lift the arm. Also when you want to lower the arm you have to also overcome the added resistance. So it does require extra effort on your part to raise and lower the saw arm. Granted if you don't set it too tight, it doesn't take a lot of muscle to raise and lower the arm. But if you're doing a lot of fretwork you'll be raising and lowering the arm a lot. So the extra effort gets kinda old after a while. I tried that method a long time ago and found I didn't care for it. If you make it too tight then the resistance is worse and if you make it too loose then the arm won't stay up. I think I was on a forum some time ago and someone said not to use that method on the Dewalt 788. Sorry but I don't remember which forum. One of the benefits of the Lifter is that it has no added resistance to the raising and lowering of the arm. The Lifter has about 95 reviews on Amazon and about 93 on my Papa's Workshop website. Almost all of them are 5 STAR reviews. If you have any questions please let me know. Thanks - Frank
Question:	do they fit the dewalt
Answer:	Tamara, I can't answer that Yes or No. In my personal opinion I don't think it would since it doesn't affect the operation of the saw in any way. However, that is just my opinion. You might contact Dewalt Tech Support and see what they say. Here's a number that I found - 1-800-4-dewalt.
Question:	What are the tpi for each number? I find they vary according to manufacturer and would like to know if possible
Answer:	I have the "Smoke" ones and they have been fine in the rain.

Product description

The DEWALT DCK421D2 20V MAX lithium-ion 4-tool kit features four powerful tools for a wide variety of jobs and projects. The fast performance of the DCD780 1/2-inch drill/driver pairs well with the compact power of the DCF885 1/4-inch impact driver to provide a well-rounded pair of tools that help everyone from steel stud framers and contractors to cabinetmakers and plumbers work their way through a variety of applications. The DCS393 6-1/2-inch circular saw features a powerful motor that makes the most demanding cuts with ease. Rounding out the kit, the versatile DCL040 worklight delivers 110 lumens of light output with an efficient LED bulb and head that rotates 120 degrees.

• DCD780 20V MAX 1/2-inch drill/driver features a two-speed transmission (0-600/0-2000RPM)
• DCF885 20V MAX 1/4-inch impact driver features a 3-LED light ring with 20 second delay
• All metal lever action keyless blade
• Battery and charger sold separately.All metal keyless shoe bevel

User questions & answers

Question:	amp hour battery large enough for the 6.5" saw for ripping long pieces of wood? I don't expect much more than 10 minutes of continuous 2x4 ripping
Answer:	Yes you can use a 12 inch blade. But you do need 2 batteries. they don't last to long. this is why I bought mine to cut tree branches.
Question:	will the charger work on 230 V 50 Hz
Answer:	El DCS310S1 viene con una batería y un cargador.
Question:	How many batteries does it come with
Answer:	Love the blade. I have it on my 10” double compound mitre saw. DeWalt of course.
Question:	Is this USA made or China / Mexico
Answer:	Maximum Speed is 6000 RPM.

Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

Product description

After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.

Motor: 1.3 Amp



Speeds: 400-1,750 SPM



Capacity: 20 in.



Stroke Length: 3/4 in.



Table Size: 16 in. x 24 in.



Table Tilt: 0°-45°, Left and Right



Cutting Capacities: at 90°: 2 1/8 in. at 45°: 1 5/8 in.



Assembled Depth: 39 in.



Assembled Width: 16 in.

• Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
• Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
• Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
• Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
• On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
• On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades

User questions & answers

Question:	Does this saw come with a stand
Answer:	NO! Even though Delta and DeWalt are very similar, The DeWalt stand has to be adapted to fit the Delta saw. Takes a few minutes.
Question:	What is the 'thing' on left side? How easy to change blade, need a tool? Disappointed no light, any available
Answer:	That black tube thing on the left is an adjustable hose that blows puffs of air (generated I think from the up and down motion of the upper arm) which will help keep your lines clear of sawdust. Changing blades is a snap, simply loosen the thumb / wing screw on the top arm and the lower holder and slide out the blade. As for the light, I make due with a shop lamp that I have hanging from the ceiling of my garage. You can check woodcraft or rockler for magnetic portable lamps that may stick to the saw somewhere - not sure if its magnetic everywhere, never tried
Question:	The saw is great but I can not get the hold down to stay in place. I move the wood and it also moves. Any thoughts
Answer:	I removed mine even though it held just fine as I found that it got in my way. This was after I'd gotten used to the saw and the forces involved. I haven't had an issue using it without the hold down, but you have to do the holding down.
Question:	There's such a price difference, what's the main difference between this saw and the dewalt dw
Answer:	Only difference is some of the outside sheet metal, the inner workings are the same. You are paying for the Dewalt name. They both used to owned by the same company.

Product features

LOW VIBRATION, HEAVY DUTY CONSTRUCTION

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOW VIBRATION & BUILT TO LAST

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. · On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

ENORMOUS CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

HUGE CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

AND MUCH MORE

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This air nozzle (part number 286311-00) is for scroll saws. Air nozzle 286311-00 directs air from the bellow to the work surface to blow away sawdust. Unplug the saw before installing this part. For Dewalt.

• This part is compatible with models including; DW788 TYPE 1,DW788 TYPE 2
• Air nozzle 286311-00 directs air from the bellow to the work surface to blow away sawdust
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Dewalt
• This air nozzle (part number 286311-00) is for scroll saws
• Unplug the saw before installing this part

Product description

Designed for use with the DW788 scroll saw, the DeWalt DW7881 scroll saw work light makes it easy to keep your work area well-lit for improved visibility, accuracy, and safety. Featuring a flexible-neck design that allows you to have complete control over positioning and a three-wire grounded plug, this light is durable and easy to mount. The work light comes with a 25-watt bulb.

From the Manufacturer

DEWALT DW7881 Scroll Saw Work Light

• Included Components: Unit, Instruction Guide

User questions & answers

Question:	Is this the newer version? Apparently there is an improvement to this item that makes it more likely to stay where it is positioned
Answer:	medium brown
Question:	What type of bulb, it said "intermediate" base?? what size is that
Answer:	Toe box on Veronica is about same size but shape is more pointy. Soles are not grippy like engineer
Question:	what are the electrical properties of the bulb
Answer:	I just received these boots within the last two weeks. I own several pair of Frye boots, shoes and sandals which have been bought at various retail stores and directly from Frye as well as Amazon. I have actually ordered 3 different Frye sandals/boots/shoes from Amazon and every time I have ordered, they have been the Frye quality I expect.
Question:	What type of bulb does the DW7881 lamp take
Answer:	On my pair of 8.5’s, they are 16.5 inches from the bottom of the boot. I hope this helps.
Question:	Hello, I'de like to buy this product. Is it possible to send it to France ( Paris ) Thanks
Answer:	15" around, but there are also 2 elastic gores, 1 on either side of the back seam.
Question:	Can this be used to mask laser cut pieces
Answer:	The calf measures 16", but l got the extended version. They were a little tight at first but after wearing for a while they fit well with skinny jeans and were quite comfortable.
Question:	Can I run this through my Inkjet printer
Answer:	i'm not sure how long of a period of time you have in mind, but i've spent a half day out in the snow with these and was dry throughout. i've used them in some rain storms too, and as long as the puddles don't go above the leather, you're left nice and dry!
Question:	Could this be used to hold layers of veneer together while cutting
Answer:	I don't know that there is a rating, but toes seem to get cold easily in most rubber boots. These are nice boots, and look great, but I wouldn't wear them in temps much below freezing for long. Also, I have many boots, but these are some of the heaviest I own. Excellent lug sole for traction in snow.

Product description

DEWALT DCS331B 20 Volt MAX Li Ion Jig Saw. It covers 3 Year Limited Warranty. All metal lever action keyless blade. Battery and charger sold separately.All metal keyless shoe bevel.

• All metal lever action keyless blade
• Battery and charger sold separately. All metal key less shoe level
• 4 position orbital action
• Battery & charger sold separately

User questions & answers

Question:	WILL THIS WORK WITH THE BATTERY DCB200 3.O.AH 20V
Answer:	Yes the blade change is keyless but it take a nontraditional blade.
Question:	Is this Product has Battery
Answer:	Yes the base can be tilted
Question:	Which dewal jig saw bare tool is brushless like makita 18 v lxt brushless
Answer:	Yes. Any of the Ryobi 18V lithium ion batteries will work in this tool. The P108 is a 4.0AH battery that has the standard Ryobi connector design. The saw works beautifully by the way. If you're a homeowner who won't be using this all day every day on a job site, this is all the Sabre Saw you'll ever need.
Question:	will the jig saw DCS331B work with the battery DCB
Answer:	According to the answer from "Riyobi Tool Team" on the HD web site, "The difference in the two models is that the P5231 has an upgraded blade clamp", but then the "Community Answer" claims, for what it's worth, that the P523 "is more powerful and yellow as opposed to blue"

• All-metal lever-action keyless blade change
• All-metal keyless shoe bevel with detents at 0Degree, 15Degree, 30Degree and 45Degree
• T-shank design fits all Bosch and DEWALT jig saws
• 6, 10, 12, 18, 32-teeth per inch blades

User questions & answers

Question:	Will this model (DCS331M1)work on Battery DCB200-2 3.0 Ah
Answer:	Bi metal will leave a cleaner hole, however this will plow through 2x pine all day. 50+ 3" holes and still going strong
Question:	Does it come with a charger
Answer:	Yes it can. I recommend using as low speed drill drill as possible (~ 300 rpm or less if possible). You may also want to consider placing tape around the hole area to help prevent radial cracks. This is a large cutter, take it slow and easy and be prepared as it may grab if not square to the work.
Question:	How many batteries come with it, one or two and is it a 3.0AH or higher
Answer:	Yes, there is more or less a standard for reciprocating saw blades (the term "Sawzall" is a trademark of Milwaukee tools). I've had a previous cordless Dewalt reciprocating saw (plus a corded version before that), and have used Milwaukee, Bosch, and Freud blades with it - maybe even some cheapo off-brands as well. As long as its a "reciprocating saw" blade (versus, say, a jig saw blade) you should be fine.
Question:	Does the case hold 1 battery or
Answer:	No it does not come with the blades.
Question:	Just received saw and arm is very stiff and hard to lift and lower. Will this improve in time? Can I add some wd 40 at the swivel point of the arm
Answer:	No blades with the tool purchased bare tool
Question:	does it come with the stand and the floor petal
Answer:	Yes all 18 volt Lithium Battery fits any 18 volt device.
Question:	What kind of blades does this one use? Pin-end or plain end blades
Answer:	Tim, I'm not really sure. Any store that sells DeWalt stuff? I never looked for short blades. Short blades are good for metal cutting but most of my chores are wood.
Question:	Is it still made in taiwan or made in Mainland china
Answer:	Hello Tommaso...my charger indicates 110/120 volt only. Not sure I understand your question about a converter...my charger indicates .6 amp load so small converter would work. Hope this helps; we have been to Italy twice and loved it.

Product description

Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. 5.5 Amp motor deliver powerful cuts in the hardest materials. Variable speed delivers 0 3,100 strokes per minute for optimal cutting speed. 4position orbital action allows for faster, more aggressive cuts in a variety of materials. Allmetal gear case provides superior durability on a professional site.

• Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
• 5.5 Amp motor deliver powerful cuts in the hardest materials
• Variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed
• 4-position orbital action allows for faster, more aggressive cuts in a variety of materials
• All-metal gear case provides superior durability on a professional site

User questions & answers

Question:	whats the wattage
Answer:	Yes, this jig saw is equipped with four cutting actions, three orbital and one straight.
Question:	will this saw cut without any drift from the blade or cut vertically square
Answer:	No we did not get a case. It came in a cardboard box.
Question:	Does it come with a case as it indicates? Comments on the review state the case is not included
Answer:	You are limited by the length of the blade used. The blade stroke is one-inch for this saw, so the max depth of wood to cut is approximately the length of the blade minus one-inch. A two-inch long blade is fine for standard 3/4-inch wood; I have used a three inch long blade for a 1/-3/4 inch thick (two-by boards) with good results.
Question:	How thick of wood will this cut
Answer:	Probably not. These pliers are made for thicker wire.