14 best skil miter saws

Product description

The 10” dual bevel sliding miter saw is powered by a 15-Amp motor that drives 4,800 RPM, delivering extended power and durability. This miter saw features a horizontal grip handle with a center located safety trigger for left- or right-handed use. The 9 detents on the stainless-steel miter plate and 11 miter locations allows for 50-degree cuts left or right, with 11 positive stop positions at commonly used angles. The tool comes equipped with a cam miter lock knob for repeatable accuracy, durability, and easy adjustments, while the tall sliding fences support 4-1/2” base molding vertically, and 6-1/4” crown molding vertically nested. The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability. The quick work clamp quickly secures materials for safer cutting.

• POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts
• DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right
• LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers
• 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees
• CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it comes with a blade! Not one of the best but it will get you started.
Question:	Will the saw sit flat on a work bench when legs are folded up
Answer:	Hello, Yes this saw can sit plat with the table folded up underneath. Thank you for your inquiry!
Question:	Is the miter slot a standard 3/4" size
Answer:	Yes
Question:	Why is Amazon humping the Skil router with this saw? Can you mount it from underneath and make a router table
Answer:	No. You can't attach a router to this table saw. A recommended table for the router could be the Skil RAS900 Router Table.
Question:	I am looking to cut rebar into various lengths for craft projects. Is this the type of saw I need to cut 1/2" rebar? Thank you for your help, new at
Answer:	Get a better blade. The saw is great, the blade that comes with it is garbage.
Question:	What type of blade does it come with? I want to cut up wood from salvaged pallets
Answer:	It comes with a blade for cutting metal, not wood.
Question:	can it cut 4" pvc piping
Answer:	Yes, It will cut 4" pvc piping.
Question:	Does the saw cut metal fast
Answer:	Yes, it cuts fast. Saw is very powerful.

Product description

A mightier Miter saw. Backed by legendary worm drive gearing, The 12 in. Dual bevel sliding miter saw combines dependable quality and lightweight portability into one powerful tool. The time-tested worm drive provides relentless power with a 15 amp Dual-Field motor that keeps cool on the job, increasing longevity and work efficiency. Dual bevel capabilities allow for both left and right cuts, paired with adjustable bevel stops and 4 x 14 cross cut capacities to let you handle any joints on the jobsite. This saw is the lightest in its class - making For easy transportation. Feel the might, with SKILSAW.

• Worm drive delivers the relentless power and trusted durability needed to get the job done on any jobsite
• Lightest-in-class construction and convenient top handle makes transportation easy
• Led shadow light provides high precision cuts with greater accuracy than lasers
• 15 amp Dual-Field motor keeps the motor cooler, increasing longevity and work efficiency; 4 x 14 cross cut capacity lets you handle any cut needed for the job
• Dual bevel cutting capacity for both left and right cuts gives you more flexibility, while adjustable 0 ̊ and 45 ̊ bevel stop presets provide greater accuracy

User questions & answers

Question:	Does this miter have a depth stop
Answer:	No, I don’t think they would work on this fence.
Question:	Does it not come with a stand
Answer:	So far the work I have use this saw for is finish work which is the reason I purchased it. I am cutting ash, cherry and maple. I would recommend the SKILSAW. The contractor who was working on my home remodel asked to to use it and was impressed.
Question:	How many amps / rpm
Answer:	Good weight and nice wheels to move around
Question:	Does the saw come with brackets to mount on stand
Answer:	The only difference is the 12 comes with a higher tooth Diablo blade. The answer about "engine" size, a.) makes no sense and b.) is wrong.

Product description

This 12-Inch compound miter saw, model 3821, includes the Quick Mount System, a laser, extension rails and a powerful motor that make it an ideal miter saw for any intermediate Dyer or woodworker.

• Laser cutline guide for fast and accurate cuts
• 9 positive stops for setting common miter angles
• Powerful 15 amp motor with 4,500 RPM
• Table extension with left/right extension rails for long, large work pieces
• Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02)

User questions & answers

Question:	Some specs I saw said it would cut up to 8” vertically laid against the fence base, is that true
Answer:	HI Our 61900Q is 3600 RPM's thank you
Question:	will this cut 6 inch laminate flooring with one cut? and on a
Answer:	Yes the 61900 can do plunge cuts. There is a knob that can be loosened so the head can move upward then down. Reference page 22 (Plunge Cut) in owner’s manual http://www.qep.com/wp-content/uploads/2015/09/OM_61900Q_123_123.pdf
Question:	Blade included
Answer:	Good day,The 61900Q will do plunge cuts.Thank you for choosing QEP.Customer Service
Question:	I am confused. Does it come with a stand? It seems to say that but then they are referring to a quick mount stand like it was a seperate product
Answer:	metal cutting application with this product are dry only.

Product features

The Ultimate Miter Saw Design

The SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser comes with a Powerful 15 Amp Motor with 4,500 RPM. This miter saw by SKIL also comes with a Quick-Mount System for quick and easy setup on SKIL miter saw stand.

Easy to Assemble

Simple to adjust and convenient to use, the SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser is highly recommended for woodwork and other fabrication. It has an innovative design with positive stops for setting common miter angles. Well-built of heavy-duty and tough material, this miter saw speaks well of its safety.

A Stunning Laser

Use the Positive stops for setting common miter angles is super-efficient as it also includes a Laser Cutline Guide for fast and accurate and precise cuts.

Product description

The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2” (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup.



This large coated cast aluminum tabletop saw comes equipped with a 10”, 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.

• RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
• INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
• PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
• 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
• 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
• DUST PORT ELBOW – Redirects dust to a container for easy cleanup

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it comes with a blade! Not one of the best but it will get you started.
Question:	Will the saw sit flat on a work bench when legs are folded up
Answer:	Hello, Yes this saw can sit plat with the table folded up underneath. Thank you for your inquiry!
Question:	Is the miter slot a standard 3/4" size
Answer:	Yes
Question:	Why is Amazon humping the Skil router with this saw? Can you mount it from underneath and make a router table
Answer:	No. You can't attach a router to this table saw. A recommended table for the router could be the Skil RAS900 Router Table.

Product description

Using the Select System, the Skil 18-Volt 5-3/8-Inch Circular Saw lets you chose whether you want to power your tool with Skil Ni-Cd or Lithium batteries (Battery and Charger Sold Separately). This gives you the freedom to choose the tools you want in your workshop or home and gives you the option of what 18-volt power system you use.

From the Manufacturer

Using the Select System, the Skil 18-Volt 5-3/8-Inch Circular Saw lets you chose whether you want to power your tool with Skil Ni-Cd or Lithium batteries (Battery and Charger Sold Separately). This gives you the freedom to choose the tools you want in your workshop or home and gives you the option of what 18-volt power system you use.

• Select System -Lithium and Ni-Cd Battery Compatible
• Lightest saw in its class for less user fatigue
• Anti-snag lower guard reduces snags when making narrow cut-offs
• Cross cut and rip two times material with ease
• Compatible with SKIL lithium-ion battery/charger combo SB18B-LI (Sold Separately)

User questions & answers

Question:	does skil make this saw with normal right hand blade
Answer:	the coating on the saw is most likely lacquer to protect against rust and I would not take it off personally. I would just wax the blade with any type of floor wax or other was and let the coating wear off with use. Most handsaws will rust on the blade in you don't wax or wd40 it regularly.
Question:	Can I use the skil 20V lithium battery with this
Answer:	Yes, the blade is included. The saw works great - very accurate and easy to use. I have only used it to cut small material (1/8 x 2 flat stock, 1/8 x 2 angle, 2" box) but it rips right through it.
Question:	Does it have ability to conect to a shopvac to vacuum away the saw dust while sawing
Answer:	unknown
Question:	Is the blade included
Answer:	I think the larger diameter blades spin at a slower RPM. But the speed of the blade on the outside perimeter is probably the same. I did read that Evolution chop saws operate at a different RPM than other chop saws, but that is because they are designed to use the Evolution blades.

Product description

With the capabilities of a standard miter and table saws, the compact SKIL flooring saw model 3601 allows you to cut flooring right where you're installing. Durable, lightweight and portable, DIYers and flooring specialists agree it makes wood floor installation easier and faster.

• Cuts solid, engineered and laminate flooring with ease
• Makes cross, miter and rip cuts
• Lightweight design for transport and use at any project location
• Miter detents at 0, 22.5 and 45 degrees
• Die-cast aluminum miter and rip fence

User questions & answers

Question:	How is the second 45deg cut made on 1/4 round to make piece for the 90deg corner? It’s obvious how to make the 1st 45deg cut, not the seoncd
Answer:	No, the DCCS620P1 does not include a case.
Question:	How well does it handle rip cuts? (specifically for the last row of a floor where you may need to rip the entire length of a board
Answer:	The 20V batteries come in Amp ratings. 2 Amps, 4 Amps, 5 Amps, 6 Amps. For more powerful tools like the Chainsaw, or Leaf Blower or Sawzall Recip Saw, you need 5 Amps and up. Therefore, while you could use any 20V battery, it would drain too fast and damage the battery. The reason the smaller 2 Amp batteries are useful is because they are lighter and you have less hand fatigue using smaller power tools like drill and impact driver. They do fine with 2 amp batteries.
Question:	Is there a dust collection hookup? How much mess does it make
Answer:	Works amazingly well. Cut a tree with about a 16" diameter into pieces. Great saw. Will never buy gas again. (Even after rebuilding carb and replacing feul lines and filter my gas saw gave me troubles)
Question:	How well will this saw cut waterproof vinyl flooring? Is there a special blade I would need
Answer:	The chain is pre sharpened. I also improved mine by using a 14" oregon bar and chain with a guage of 0.50 instead of the 0.43 guage. This saw is powerful enough to use a 14" bar and the 0.50 guage seems to cut much faster.

Product features

Lightweight Design

Easy to transport and use at any project location.

Cross, Miter and Rip Cuts

Cuts through solid hardwood, engineered and laminate flooring.

Miter Gauge

Detents at 0°, 22.5° and 45°, giving flexibility for different types of cuts.

Die Cast Aluminum Miter and Rip Fence

Sturdy, stable and durable miter and rip fence.

More About This Product

• Amperage: 7.0
• Rating: 120V
• No Load RPM: 11,000
• Blade Diameter: 4.375”
• Miter Angle Range: 0°, 22.5° and 45°
• Weight: 24 lbs.

Product description

CHOP SAW DRY CUT 12IN W/DIABLO

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

Product description

For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You'll cut through a variety of wood materials with the 6-TPI blade. Make quick angle and height changes with the rack and pinion adjustable table. EZ View Blade Tracking lets you easily align the blade. Other features include a rip fence for straight cuts and a miter gauge for cross cuts. The dust port keeps your work area dust-free, while the LED work light adjusts so that you can see exactly what you're doing.

• Rip fence for straight, accurate cuts; 6 TPI band saw blade cuts through a variety of wood materials
• Articulating LED work light for better view of work piece and cut line
• Features a 1-1/2 inch dust port that keeps work area clear of dust
• Rack and pinion table adjustment for quick angle and height adjustments
• Motor is 1 speed for wood or metal based materials

User questions & answers

Question:	can I cut glass
Answer:	Not unless you can find a diamond/carbide blade - glass is usually cut by abrasion. That would be unlikely for a small saw of this type.
Question:	what are the dimensions of the base....LxW
Answer:	The black base is 14-1/4" long, by 8-1/2 wide, and 2" tall. This SKIL Bandsaw is a wonderful addition to my shop and works beautifully! I have had mine for over 2 years now! Enjoy!
Question:	What are the specs on the included sawblade (TPI and width)? How many saw blades does this come with
Answer:	The blade that's included is 6 TPI. This saw accepts 1/8" to 3/8" blade widths, 59 1/2" and 59 1/4" length blades.
Question:	Can this saw be bolted down to a table? To make less subject to "wobbling
Answer:	Depends on why it wobbles. If it wobbles because it sets on an uneven surface, then yes bolting works. If wobble is from an oblong wheel, out of balance wheel, or something else along thode lines; then no, bolting it down won't help.

Product features

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light

For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the new 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You’ll cut through a variety of wood materials with the 6-TPI blade. Make quick angle and height changes with the rack and pinion adjustable table. EZ View Blade Tracking lets you easily align the blade. Other features include a rip fence for straight cuts and a miter gauge for cross cuts. The dust port keeps your work area dust-free, while the LED work light adjusts so that you can see exactly what you’re doing.

Includes

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light, Blade, Miter Gauge, Rip Fence.

Articulating LED Work Light

The articulating LED Work Light illuminates cut line and ensures proper visibility.

Rack and Pinion Table Adjustment

To quickly make the right angle and height changes, a convenient rack and pinion table adjustment is found on the band saw.

Rip Fence and Miter Gauge

The adjustable rip fence helps guide the work piece for straight and accurate cuts, while the miter gauge comes in handy when making crosscuts.

Dust Port

To minimize dust and debris in the work space, a dust port is available to attach a vacuum hose.

Product description

Power and Performance

The SKIL PWRCore 12 Cordless Circular Saw is designed for compact power, efficiency, and performance. Whether you’re cutting through lumber, paneling, or trim, this compact circular saw is portable and easy to control for a variety of cuts—perfect for all of your projects throughout in your home.    



More About SKIL PWRCore 12 Brushless 12V 5-1/2 Inch Circular Saw:

-Ideal for accurate and quick cuts through wood

-Electric saw with compact and powerful brushless 4200 RPM motor

-5-1/2 inch thin kerf, 18-tooth, carbide-tipped blade for fast and clean cuts

-Bevel capacity up to 50 degrees

-Quick depth adjustment for greater range

-Steel shoe provides durability for long-term cut accuracy

-Electric brake stops blade quickly

-Integrated dust blower keeps cut line visible

-LED light helps you see your work clearly and safely

 

About SKIL PWRCore 12 Technology:

The innovative PWRCore 12 system is built for longer battery life, faster charging, and convenience. Industry-leading PWRCore 12 Lithium Battery technology utilizes a patented cooling system; each cell is wrapped with temperature management material to keep the battery cool and powering on for 25% longer run time and 2X battery life. PWRJump charges the battery from 0% to 25% in just 5 minutes, providing enough power to blast through 100 screws (based on 2.0Ah battery).  And PWRAssist Mobile Charging provides power on-the-go with a USB port to charge other devices. These innovations fuel the powerful performance of the PWRCore 12 system.

• QUICK AND CLEAN CUTS—18-tooth thin kerf carbide-tipped blade and durable steel shoe ensures accurate cuts again and again, while integrated dust blower keeps cut line visible.
• Compact SIZE—The digital Brushless motor provides compact, lightweight power for cutting through Many materials.
• EASY DEPTH ADJUSTMENT—Quickly adjust depth for greater range of applications.
• 0-50 DEGREE BEVEL CAPACITY—Easy bevel adjustment allows for a variety of bevel cuts and a multitude of applications.
• ELECTRIC BRAKE—Reduces downtime between cuts by quickly stopping the blade.
• LED LIGHT WITH PRE-LIGHT AND AFTER-GLOW—Illuminates work area when trigger is pressed, and light remains on 10 seconds after trigger is released.

User questions & answers

Question:	cuantas baterias trae
Answer:	This saw is a cut off saw. It is not designed for ripping.
Question:	Does this 12v circular saw have an electronic brake
Answer:	This saw is not one that has hardened teeth. It can be sharpened with a triangular saw file. Takes me about 15 min. Easy to do.
Question:	Perdón mi ignorancia, que significa "sin escobillas
Answer:	It is firmly riveted. No issues.
Question:	Incluye batería y cargador
Answer:	Its a Fleam cut saw meaning it will crosscut and rip. It does crosscut faster than it rips, but will do both.

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

SKIL 3540-02 7-Inch Wet Tile Saw

Skil Benchtop Power Tools are Quality Tools at a Great Price !

Skil 3540-02 7" Wet Tile Saw Complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw Features: Stainless Steel Table top is Resistant to Corrosion Adjustable Rip Fence with Miter Gauge for Accurate Straight and Miter Cuts 0-45 Degree Bevel for a Wide Range of Cuts Blade Cooling Water Reservoir to Keep Blade Cool and Minimize Dust and Debris 7" Diamond Blade for Fast and Smooth Cutting Skil 3540-02 7" Wet Tile Saw Specifications: Amperage: 4. 2 Arbor Size: 5/8" Bevel Angle Range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No Load RPM: 3600 Voltage: 120V AC Only Weight (lbs. ): 18 Width: 13. 25"



QEP 6-7001Q 7" Continuous Rim Diamond Blade For Wet Tile Saws For Ceramic Tile

The QEP 6-7001Q 7 in. Continuous rim diamond blade provides accurate cutting with minimal chipping. The blade is specifically engineered for cutting ceramic tile. Designed for wet cutting and long lasting performance.

• Product 1: Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Product 1: Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Product 1: Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Product 1: Bevel cuts tile from 0 to 45 degrees. Cut Material: Stone/Masonry
• Product 2: Exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts
• Product 2: General purpose blade for wet/dry cutting of ceramic
• Product 2: Diamond blade for long-lasting performance with minimal chipping
• Product 2: 8730 maximum RPM, arbor size of 0.625 in.

Product description

Need a more powerful circular saw for weekend or DIY projects? The SKIL 5180 14-Amp 7-1/4 inch circular saw slices through 2x4's and cuts plywood down to size. The integrated dust blower keeps the line of cut sawdust-free so you can get the job done easily and accurately. The 51-degree bevel, with positive stop at 45-degree, gives you a wider variety of angle and miter cuts. At 7.2 pounds, it's lighter than its predecessor and has been updated with a spindle lock for easier blades changes using the on-tool wrench.

• 14-Amp motor for more power and performance than the SKIL 5480
• 15% weight reduction vs. SKIL 5480, reduces user fatigue
• 51Degree bevel with positive stop at 45Degree for greater cut capacity that SKIL 5480
• Improved dust blower keeps line of cut free of sawdust
• Includes 20-Tooth Carbide Blade

User questions & answers

Question:	does it have a cutting depth adjustment
Answer:	this is too delicate for wood planks. it is more for fine detail work.
Question:	Arbor diameter???? I´m guessing 5/8" as usual
Answer:	It is a pull saw. The teeth are small so it doesn't saw fast but it does saw fine, meaning that the cut it smooth and clean It would take a long time to get through a 2 X 4 but to cut dovetail joint or finger joints, a small piece of oak or maple or another piece of fine wood, it leaves a very smooth and nice cut. Nice saw!
Question:	Where was this made
Answer:	I have the 7160 with wood handle.. As far as I can tell the only difference is the wood handle versus a plastic handle on the 16290. It is a great cutting blade.
Question:	Does this saw require oil changes
Answer:	Well, yes & no. It comes with a cardboard cover (sheath) for protection of your fingers and its blade, but not a leather sheath. I bought two very nice leather sheaths on Amazon for two of my Corona saws and am very happy with them. The cardboard covers will last for a while if you take good care of them. Hope this helps.

Product features

SKIL 5180-01 14 Amp 7-1/4 In. Circular Saw

When it’s time to tackle your next project, look no further than the SKIL 5180-01 14 Amp 7-1/4 In. Circular Saw. Its power, and user friendly features make it the go-to circular saw for your weekend and DIY projects. The 14 amp motor gives you the power and performance you need to slice through two-by-fours to build a deck and easily cut plywood down to size.

At 7.2 lbs. the 5180-01 is lighter than its predecessor (5480-01) for easy handling and comfortable use. With depth of cut at 2-3/8 in. and 51 degree bevel, with a positive stop at 45 degrees, this saw gives a wider variety of angle and miter cuts. The 7-1/4 in. circular saw comes with a 20-tooth carbide blade so you’re ready to tackle projects right out of the box.

Includes

SKIL 5180, 20-tooth Carbide blade, and wrench stored in foot

Power-on Indicator

Know when the saw is powered for the job

Spindle Lock

Easy blade changes with spindle lock and a wrench stored in the foot

Dust Blower

Keeps the line of cut free of sawdust for accurate cuts

Guarded Trigger

Minimizes accidental start up

Product description

Introducing the lightest pro circular saw on the market, the new SPT67WL-01 SKILSAW SIDEWINDER, from the company that invented circular saws. Legendary SKILSAW worm drive inspired technology has been integrated into this SIDEWINDER with our best-in-class Dual-Field motor invented specifically for saws. The combination of the lightweight housing and unique Dual-Field motor results in a saw that lets you power through the toughest days on the jobsite, year after year. The 15 Amp motor ensures power for each demanding cut. Add the 56 degree precision beveling capacity and true grip to the list of benefits. The SPT67WL-01 is backed by the SKILSAW Stay True Guarantee which includes a 1 Year limited warranty as well as a 180 Day money back, no questions asked guarantee. SKILSAW, true to the trade since 1924.

• Lightest weight professional circular saw in its class at 8.6 pound
• 56 degree bevel with positive stop at 45 degree allows you to complete a variety of cuts
• 15 Amp motor ensures power for demanding cuts
• Dual-Field motor dissipates heat, allowing the motor to stay cool and last longer
• 10 foot cord minimizes hanging on sheet materials

User questions & answers

Question:	Does this allow for the addition of a rip fence? If so what is recommended/compatiable
Answer:	Yes, the control is trash! The saw is crap too, had one, it vibrated and the descent control is set to one rate. When you need to reset it for the next cut you must open the valve then adjust it all over againi. Skip it, not worth the money. If your looking for a clean cutting Saw that cuts 1 piece at a time buy a dry chop, you'll love it. Clean cut and if you mess up you can adjust it to and cut a bit closer, the part is cold after the cut and the clean up are just metal fines.
Question:	Este producto es nuevo o restaurado
Answer:	No. My name is Chad I make knives. I think there is a way to cut it off but my switch was Bbroken when I got it. My gear in the back just stripped. I use it constantly. I don't think it's worth the money.
Question:	What’s Depth of the cut
Answer:	Blade is .024” and kerf is .029”. Just measured on my calipers.
Question:	Is there a dust collection port accessory for this saw
Answer:	Yes it will it is kind of big. It will cut through dog treats.

Product features

7-1/4 In. Lightweight SIDEWINDER Circular Saw

From the magnesium components to cord length this saw was built for the pro and every day jobsite demands. Designed with a lightweight resin housing and durable magnesium guard and footplate, SIDEWINDER is the lightest weight saw in its class, weighing only 8.6 lbs. The dual-field motor, a best-in-class powerful 15-amp motor, helps keep the motor cool through the toughest cuts. This 7-1/4 in. saw has a max cutting capacity of 2-7/16 in. at 90° with a maximum 56° bevel capacity featuring positive stop at 0° and 45°. Ideal for applications such as framing, decking, siding and ceilings. Works with soft, hard and engineered woods. Included with the SPT67WL-01 is an on-tool multi-function wrench for blade and brush changes and a 24-tooth carbide SKILSAW blade.