11 best stanley orbital sander

Product description

The new 5 inch Random Orbit Finishing Sander SV13YST features a palm grip design that gives the user complete control. Its soft elastomer covered body provides a comfortable grip while also helping to reduce vibration. With a powerful, 2.8 amp motor and an impressive 9,000-13,000 OPM this sander can remove a lot of stock in a short period. Standing at only 5 to 9 In. high and weighing only 3.1 lbs, this compact workhorse will make a nice addition to any woodworker's arsenal.

• PALM SANDER: Palm-style, soft comfort grip reduces vibration and provides a comfortable grip
• POWER: 9,000 To 13,000 RPM variable speed dial to achieve super Smooth finishes
• MOTOR: 230W 2.8 Amp motor
• INCLUDES: Dust collection hose connector and adapter to reduce clean up time
• SIZE: 5-11/16-in high, this compact sander is easy to use for long periods of time
• LIGHTWEIGHT: Only 3.1 lbs for easy maneuverability and low fatigue
• GRIP: Soft elastomer covered grip reduces vibration and provides a comfortable hold

User questions & answers

Question:	Is the paper 8 hole hook and loop
Answer:	As long as the pad is 8 holes and 5 inches. I am using them on a rigid 5 inch sander and they work fine.
Question:	Will mesh sanding discs work with this sander
Answer:	Mine does not have a center hole.
Question:	What grit is the sand paper it comes with
Answer:	My name is Lenora from Affinity Tool Works, the manufacture for your HTC Universal Mobile Base. I apologize that some of your hardware did not work to your expectations. We would like to resolve this for you. Please contact our customer service dept at 866-588-0395 or [email protected] for replacement hardware at no cost to you.ThanksAffinity Tool [email protected]
Question:	What sandpaper does this use? 5 hole? 8 hole
Answer:	I plan to use this on a fridge - but a smaller fridge that lives in the garage anyway. It should fit, (Kenmore 69319) but if it doesn't, I'll attach a piece of 3/4" plywood to the mover, then set the fridge on the plywood. It won't be moved often, but it does need to move easily on occasion - more than normal fridge wheels can facilitate. I'll have to figure a way to bolt it down to the plywood if I have to go that route.

Product description

The DWE6421 5-inch Single Speed Random Orbital Sander with hook and loop pad has a 3-amp motor that delivers 12,000 OPM. The separate counterweight reduces vibration and along with the rubber overmold grip provides comfortable sanding. A shorter design allows users to get closer to the work surface and the one-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the power sander directly to the DWV010 or DWV012 dust collectors.

• 3.0-amp motor of the orbital sander spins the pad at 12,000 OPM
• Shorter height of the hand sander allows the user to get closer to work piece
• Separate counterweight design reduces vibration for improved comfort of the electric sander
• Rubber over-mold in all of the critical areas of the sander
• Improved dust-sealed switch to protect against dust ingestion for longer switch life
• Improved dust collection and one-handed locking dust bag
• Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors
• To attach dust port to other vacuum systems with 1-1/4" hoses, use DWV9000 Universal Quick Connector

User questions & answers

Question:	Can you use this package - mestool 58-ap 100 per box include 60 80 120 150 and 220 grits that you offer with this particular sander
Answer:	I suggest you get educated on the tools, Velcro is for Velcro ( hook and loop) , adhesive is for smooth vinyl pad , hope this helps someone...
Question:	replacment pad ? cant find one,help
Answer:	With the right grit sandpaper yes.
Question:	How long is the cord
Answer:	I've used mine about a year now at the shop I work at.
Question:	Can this be used to sand a car
Answer:	The Orbit Diameter for 6 inch and 5 inch both is 3/16”, hope this can help you. Have a nice day!

Product description

Non-vacuum 3M Random Orbital Sanders are air powered sanders designed to deliver professional performance and a swirl-free finish in high-production industrial environments where dust extraction is not required. This palm sander is loaded with features to reduce vibration and noise and increase ergonomics and operator comfort. These features include a comfortable rubber grip and a recessed lever platform that eliminates pinching and pressure points on the operator’s palm. An innovative internal muffler helps reduce noise and won’t break off during use. A Stikit disc pad is included with this 6 inch random orbital sander, allowing the operator to quickly and easily apply adhesive-backed discs to the sanding tool. 3M pneumatic orbital sanders are designed to optimize the performance of 3M abrasives, with speed control and a low-profile, balanced design. 5/16” diameter orbit provides an aggressive cut-rate on metal, composites, wood and more. Operates at 90 psi with an air flow rate of 17 SCFM. The 3M™ Random Orbital Sander 20324 non-vacuum tool is air-powered and delivers professional performance and a swirl-free finish hour after hour in high-production industrial environments where dust extraction is not required. Designed to optimize the performance of 3M™ Abrasives, this high-quality 3M tool features a 6" diameter for broader coverage, and a 5/16" orbit ideal for aggressive sanding applications, where material removal is more important than finish. Built with a powerful, precision-balanced 0.28 hp motor and durable lightweight aluminum housing, 3M pneumatic random orbital sanders run smoothly and are built to last. Use them with a wide selection of 3M abrasives and accessories. A 3M™ Stikit™ Disc Pad is included. Disc Pad Included for Optimal Performance 3M sanders perform best when paired with 3M disc pads and abrasives. The disc pad included with the tool reduces vibrations for smoother running, provides reliable disc adhesion, and enables optimal performance of the tool. The box includes one 6" 3M Stikit Low Profile Disc Pad 20354 recommended for flat sanding operations, for use with 6" Stikit discs (sold separately). This versatile sander also works with 3M™ Hookit™ disc pads, enabling operators to use Scotch-Brite™ discs in addition to coated abrasive discs. Using Your Pneumatic Sander This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air supply with an airflow rate of 17 standard cubic feet per minute (SCFM), or 481 liters per minute (LPM), and 90 pounds per square inch (psi) at the tool, i.e. the point where the air hose is connected to the tool, when the tool is running with the level fully depressed. Recommended is an approved 3/8 inch (10 mm) airline at the minimum length required for the application, with a maximum length of 25 feet (8 m). For more details about connecting the tool to your air supply, see the Instruction Manual. Max RPM is 12,000 at 90 psi. Why Choose a Random Orbital Sander? 3M random orbital sanders optimize sanding and surface preparation on wood, metal, fiberglass and composite materials, and many other substrates. Also known as dual action (D/A) palm sanders, these industrial-grade tools rotate the abrasive disc and disc pad in two simultaneous overlapping oval patterns so no single abrasive particle follows the same path twice, producing a random scratch and swirl-free finish ready for paint or varnish. About 3M Abrasive Systems For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value. What's in the Box:

From the Manufacturer

The 3M™ Random Orbital Sander 20324 non-vacuum tool is air-powered and delivers professional performance and a swirl-free finish hour after hour in high-production industrial environments where dust extraction is not required. Designed to optimize the performance of 3M™ Abrasives, this high-quality 3M tool features a 6" diameter for broader coverage, and a 5/16" orbit ideal for aggressive sanding applications, where material removal is more important than finish. Built with a powerful, precision-balanced 0.28 hp motor and durable lightweight aluminum housing, 3M pneumatic random orbital sanders run smoothly and are built to last. Use them with a wide selection of 3M abrasives and accessories. A 3M™ Stikit™ Disc Pad is included.

Disc Pad Included for Optimal Performance

3M sanders perform best when paired with 3M disc pads and abrasives. The disc pad included with the tool reduces vibrations for smoother running, provides reliable disc adhesion, and enables optimal performance of the tool. The box includes one 6" 3M Stikit Low Profile Disc Pad 20354 recommended for flat sanding operations, for use with 6" Stikit discs (sold separately). This versatile sander also works with 3M™ Hookit™ disc pads, enabling operators to use Scotch-Brite™ discs in addition to coated abrasive discs.

Using Your Pneumatic Sander

This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air supply with an airflow rate of 17 standard cubic feet per minute (SCFM), or 481 liters per minute (LPM), and 90 pounds per square inch (psi) at the tool, i.e. the point where the air hose is connected to the tool, when the tool is running with the level fully depressed. Recommended is an approved 3/8 inch (10 mm) airline at the minimum length required for the application, with a maximum length of 25 feet (8 m). For more details about connecting the tool to your air supply, see the Instruction Manual. Max RPM is 12,000 at 90 psi.

Why Choose a Random Orbital Sander?

3M random orbital sanders optimize sanding and surface preparation on wood, metal, fiberglass and composite materials, and many other substrates. Also known as dual action (D/A) palm sanders, these industrial-grade tools rotate the abrasive disc and disc pad in two simultaneous overlapping oval patterns so no single abrasive particle follows the same path twice, producing a random scratch and swirl-free finish ready for paint or varnish.

About 3M Abrasive Systems

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

What's in the Box:

3M™ Random Orbital Sander 20324 Pneumatic Non-Vacuum Tool

3M™ Stikit™ Disc Pad 20354

Sample of 3M Air Tool Lubricant

24 mm Pad Wrench 28108

Instruction Manual

• PROFESSIONAL PERFORMANCE – Powerful 0. 28 HP motor provides enough power for sanding and finishing applications
• SMOOTH OPERATION – Precision balanced motor operates smoothly for greater comfort and control
• PNEUMATIC POWER – Exceeds the capability of standard electric sanders, supplying hours of continual use
• EASY ADHESIVE DISC ATTACHMENT – Includes 3M Stikit Disc Pad for use with adhesive-backed sanding discs
• BUILT FOR DURABILITY – Aluminum body and durable composite cover, reduce the risk of cracked housings and downtime
• ERGONOMIC DESIGN – Low-profile, balanced design optimizes ergonomics and performance of 3M sanding abrasives
• Special Features: Compact

User questions & answers

Question:	How much air does it use
Answer:	40 nails per strip.
Question:	Is it Velcro pad
Answer:	The DPT-8DR113GFH is ring shank.

Product description

Get cordless convenience with the 20V MAX* Cordless Random Orbital Sander. Tackle home repairs or upcycle furniture with the power and control you need to remove old material fast. The dust collection canister of BLACK+DECKER sander lets you leave a smooth, clean finish by helping to keep your work surface clear as you go.

• The 20V MAX* Random Orbital Sander brings cordless convenience for small projects and quick touches
• Hand sander is 30% more compact than leading competitor, Ryobi P411
• Power sander with 12k OPM provides the speed to quickly remove material, paint, or stain
• Dust collection helps to keep the work surface clean
• Hook and loop system helps make paper changes easy

User questions & answers

Question:	I have the black & decker weedwhacker and blower that i bought about five years ago that takes the big brick batt. 36? can it be used
Answer:	No. Only one speed.
Question:	I read reviews saying the dust bag gets holes in it. Can u get replacement dust bags
Answer:	Hello Eldeil, This unit is only compatible with 80v batteries only. The 60v battery will not fit/operate this tool. If you have a 60v battery you can use it with TL60L2510 which is the 60v cultivator.
Question:	Can I use a 36v or 40v B&D battery with this sander
Answer:	Hello there, The width of the unit is 14".
Question:	Can this be purchased without the battery and charger? I already have several with my other B&D tools
Answer:	Hello there, Yes, this tiller can be used to till soil. The ideal condition of soil should not be too wet or too dry. Till the soil when it reaches approximately 60°F.

Product description

The Bosch ROS20VSC 5" Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well blended, ultra smooth finish. This tool is designed to allow finish carpenters and cabinet makers to Complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect Speed for whatever task they need to Complete, with an optimal on board system for filtering fine dust.

• Smooth Finish: Pad dampening system designed to eliminate swirl marks on both flat and contoured surfaces
• Easy Disc attachment: Through Bosch's signature Hook and Loop disc attachment system, sanding pads stick to the hand sander, acting like a Velcro adhesion material
• Variable speed Control: Powerful 2.5 AMP motor allows speed to work piece and task matching with ease
• Dust collection: Features a micro filter system for fine dust and trapping particles as small as a 1/2 micron in diameter. Durable and compact, the dust canister shows dust level and easily detaches for mess free tasks
• Kit contents: Includes sanding pad, sanding disc, dampening ring, dust canister, vacuum adapter and carrying case

User questions & answers

Question:	Where could I get replacment filters
Answer:	Thank you for your question. The filters are not available separately it would be a replacement dust canister part #2609199179. http://www.amazon.com/Bosch-Sander-Replacement-Container-2609199179/dp/B002ENHE14/ref=sr_1_2?s=hi&ie=UTF8&qid=1428435615&sr=1-2&keywords=Bosch+2609199179 If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Can this sander be hooked up to a vaccum using standard attachments
Answer:	Yes it can, I hook mine upto a Rigid Shop Vac. However, because of the size of a shop vac type hose I would suggest going into a smaller hose that you would attach to the larger shop vac hose. For your Information, this sander does have a connector to connect to a dust extraction hose instead of the included dust system. This sander does make a lot of dust so going into an external extraction system is a big help.
Question:	My new ros20vsc, set at 6, slows noticeably if i just set it on a suface to sand. is this normal
Answer:	Thank you for your question. The ROS20VSC Orbit sander normally has a slow start, however, if it is for the whole time you are using the tool with the speed of 6, we might need to evaluate it. Kindly contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the difference between this and the ROS20VSK version? Just the carrying bag? Does the 'K' version have anything this one does not
Answer:	Thank you for your question. The ROS20VS is the same sander in both kits. The difference is the ROS20VCS will have a soft canvas carrying bag and the ROS20VSCK will include a hard carrying case. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

ROS20VSC 5-Inch Random Orbit Sander/Polisher Kit

The Bosch ROS20VSC 5-inch Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well-blended, ultra-smooth finish. This tool is designed to allow carpenters and cabinet makers to complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect speed for whatever task they need to complete, with an optimal on-board system for filtering fine dust.

Includes

ROS20VSC 5-inch Random Orbit Sander, Soft Backing Pad, Sanding Disc, Vacuum Hose Adapter, Contractor Bag.

Built to Erase Swirl Marks

The Bosch ROS20VSC is designed to eliminate the most common complaint of random orbit sander users, swirl marks on the work piece. It features an integral pad dampening system that helps prevent swirl marks. The tool features Bosch’s signature HookTight hook-and-loop disc attachment. This attachment has over 35,000 long-life hooks that will ensure firm grip of the disc during use. Additionally, the microcellular backing pad is pliable to ensure a smooth, fine finish on both flat and contoured surfaces alike.

Right Speed for the Task

This random orbit sander/polisher includes variable-speed control, so users can demand the exactly right speed for each individual task. The speed is adjustable from between 7,500 and 12,000 opm, with a single speed of 12,000 opm, so operators can dial up or down. The orbit diameter is 3/64-inch, and the tool weighs in at only 3.5 pounds, furnishing remarkable sanding effectiveness in a tool that is straightforward and easy to deal with.

Comfort Comes First

The Bosch ROS20VSC features a comfortable soft-grip top and body in its design, which allows the user to have multiple grip positions. Thanks to this feature, the days of user fatigue and discomfort from a single grip are gone. In addition, this sander produces a low-vibration operation for extended periods of use. Constant response circuitry maintains constant speed under load.

Dust Prevention

This tool has a built in microfilter system that traps particles as small as 1/2 micron in diameter. The microfilter dust canister curtails dust spillback into the sander. This ensures that users aren’t breathing in too much dust on the job. The compact dust canister simply twists off, making the dust level visible and incredibly easy to detach when necessary. The sander is compatible with standard 1-1/4-inch and 1-1/2-inch vacuum hoses or any Bosch vacuum cleaner hose, and it features a dust-sealed switch.

Product description

Remember when you could sand those hard to reach places? the WEN variable speed drywall Sander goes where no Sander has gone before. With a pivoting 8.5-Inch head that swivels in all directions, the WEN drywall Sander automatically adjusts to be flush against every surface that crosses its path. Adjust the speed anywhere from 600 to 1500 RPM to meet the needs of the project at hand. The hook and loop base Pad makes Sandpaper changes a breeze while the Foldable design allows for simple storage and transportation. The lightweight 9-pound body telescopes to reach lengths up to five feet away. This package also includes six pieces of hook and loop Sandpaper Disks (60, 80, 120, 150, 180 and 240 Grit) along with a flexible dust vacuum hose that stretches up to 15 feet for reliable dust removal. And because it's a WEN product, your variable speed drywall Sander comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer helpline. Remember when you could reach the unreachable? remember WEN.

• Variable speed adjustment operates anywhere from 600 to 1500 RPM
• Hook-and-loop base pad makes changing sandpaper easier than ever
• 5-Amp head-mounted motor provides maximum torque to the sanding disk
• Automatic dust removal system combined with the 15-foot dust hose minimizes Clean-up
• Includes 60, 80, 120, 150, 180 and 240 grit hook-and-loop 9-inch sanding discs

User questions & answers

Question:	Can it be used with a ridgid shop vac
Answer:	It uses drywall sand screen. Yes you must attach the sand screen. If you use sand paper, the attached vacuum will not pickup the drywall particles.
Question:	Can you buy replacement head pad
Answer:	The bottom is actually a slightly hardened rubber with a Groove pattern in it for allowing the Dust to flow to the vacuum tube
Question:	How many holes does it have for the sand paper? (8 or
Answer:	it was able to adjust to both the 1 7/8" and 2" size hoses without problems. Note: I did find the need to use duct tape at the shop vac to minimize the fine dust and routed the output out the window to keep the dust to a minimum.....
Question:	Do u have 180 sandpaper or
Answer:	I just tear 9" X 11" sheets in half long ways.

Product features

Hook & Loop Base Pad

The hook and loop base pad makes switching between the 6 included combination-grit sanding discs a breeze.

360˚ Pivoting Head

The 8.5" head swivels in all directions and automatically adjusts to be flush against every surface that crosses its path.

Automatic Dust Removal

Messy workspaces are a thing of the past. The flexible dust vacuum hose stretches up to 15 feet for reliable dust removal.

Variable Speed Motor

The variable speed dial allows for simple adjustments anywhere from 600 to 1500 RPM while the 5-amp head-mounted motor design maximizes torque during operation.

Product description

Makita's 5-Inch Random Orbit Sander with variable speed (model BO5041) combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. It is ideal for woodworkers, finish carpenters and general contractors. The BO5041 features a Makita-built 3 AMP motor with over-sized sealed ball bearing construction for longer tool life. The variable speed control dial (4,000 - 12,000 OPM) allows the user to match the sanding speed to the material, with a large two-finger trigger switch with conveniently located lock-on button for continuous use and increased operator comfort. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. Additional comfort and ease-of-use features include a new adjustable front handle to allow for sanding in corners and confined areas, as well as ergonomic rubberized handles for improved operator comfort and control. The BO5041 uses quick-change five-inch eight-hole hook-and-loop abrasive disc, and has an efficient through-the-pad dust collection system that helps provide a cleaner work environment. The high capacity dust collection system with built-in vacuum port adapter is engineered for improved dust collection. The rubberized palm grip and top handle fit like a glove with even pressure and easy control.

• More Power for Faster Sanding and a Smooth Finish
• Smooth and fast sanding with 3.0 AMP motor
• Variable speed control dial (4,000-12,000 OPM) enables user to match the sanding speed to the application
• Ergonomic rubberized palm grip and handle for improved operator comfort and control
• Adjustable front handle allows for sanding in corners and confined areas
• Smooth and fast sanding with 3.0 AMP motor
• Variable speed control dial (4,000-12,000 OPM) enables user to match the sanding speed to the application

User questions & answers

Question:	how easy is it to connect this to a shop-vac? What is the size/shape of the port on the sander than a shop vac hose would connect to
Answer:	Very easy with Ridgid Shop Vacs. Size and shape is a 7/8" outer diameter circle. To connect to Ridgid brand shop vacs, simply use a Carlon 3/4 in. PVC conduit box adapter from Home Depot's electrical department - the inner diameter is a direct fit for the sander's dust port and the outer diameter is a direct fit for the nozzle end of the 1-1/4 inch hoses. The conduit adapter is 50 cents and there is also a Ridgid 3-piece adapter kit for $8.50 to step down to the conduit adapter from the 2-1/2 inch hoses. No glue, no tape, no hose clamps - just press the adapter in and get to sanding.
Question:	How well does it collect dust when attached to vacuum system? I'm comparing this with Festool sander
Answer:	With a small shop vac, mine collects about 90 % of the dust...but needs frequent cleaning of the vac filters....depends on the material being sanded, and the sanding grit being used. With the vac tube open, the sander jets a stream of dust out of the chute. This is an excellent unit....but I have zero experience with Festool.....
Question:	The first picture shows a plastic type "dust bag," while the other pictures show a cloth type bag. Which bag is included? Does it fall off easily
Answer:	I bought mine about 6 months ago. The dust bag is cloth and the attachment does not fall off but could be better designed. I am on by 5th or 6th sander is about 15 years and all handled dust about the same. All of my previous sanders broke or stopped working after about a year and the 2 different Rigid models only lasted about 6 months. This is why I bought this more expensive model. So far it is working great.
Question:	How is the vibration on this sander, can you barely feel it
Answer:	Mine is a very low mileage model. But I can say it is a pleasure to use after having some low cost sanders in the past. I think, even with extended usage, the vibration level is low enough to not cause any stress from using it.
Question:	Is there anyway to get into corners or sand curves with this sander? Is that a problem
Answer:	Sanding curves is no problem but it won't get into enclosed corners
Question:	How long is the cord
Answer:	The cord is 6 ft. 5 in. long.
Question:	Will this work with bosch compatible papers? there is no mention of the correct paper to use, and no paper options mention b&d compatibility
Answer:	Yes. I ordered a box of Bosch papers (80 - 220 grain) and they work great with B&D.
Question:	Does the dust collector actually work or does it spew dust all over the place
Answer:	Spews dust ALL OVER THE PLACE !!.....I'm ready to send mine back.....the dust recovery system is flawed

Product features

BLACK+DECKER BDERO100 Random Orbit Sander

The BLACK+DECKER BDERO100 5-inch random orbit sander provides fast, efficient material removal. Its compact size brings DIYers close to the work surface, which affords them premium maneuverability around their projects. The sander features random orbital action for a high removal rate and a high-quality finish. Its hook and loop system allows users to make fast and easy paper changes.

Efficient

The sander features random orbital action for a high removal rate and a high-quality finish.

Compact

The sander's compact size brings DIYers close to the work surface, which affords them premium maneuverability.

Convenient

The hook and loop system allows users to make fast and easy paper changes.

Clean

The sander has a dust sealed switch to keep all dust and debris out, to extend tool life.

About BLACK+DECKER

Since 1910, BLACK+DECKER has been setting the standard for innovation and design of power tools, accessories, outdoor yard care equipment, home cleaning products, automotive and lighting products, hardware, and other home improvement products. The inventor of the first portable electric drill with pistol grip and trigger switch, BLACK+DECKER has evolved from a small machine shop in Baltimore, Maryland, to a global manufacturing and marketing powerhouse with a broad line of quality products used in and around the home and for commercial applications. When users need to get work done, they trust BLACK+DECKER for the products that will do the job efficiently and reliably.

Makita BO5041 5" Random Orbit Sander

Makita’s 5-Inch Random Orbit Sander with variable speed (model BO5041) combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. It is ideal for woodworkers, finish carpenters and general contractors.

The BO5041 features a Makita-built 3 AMP motor with over-sized sealed ball bearing construction for longer tool life. The variable speed control dial (4,000 – 12,000 OPM) allows the user to match the sanding speed to the material, with a large two-finger trigger switch with conveniently located lock-on button for continuous use and increased operator comfort. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up.

More Power for Faster Sanding and a Smooth Finish

Additional comfort and ease-of-use features include a new adjustable front handle to allow for sanding in corners and confined areas, as well as ergonomic rubberized handles for improved operator comfort and control.

The BO5041 uses quick-change five-inch eight-hole hook-and-loop abrasive disc, and has an efficient through-the-pad dust collection system that helps provide a cleaner work environment. The high capacity dust collection system with built-in vacuum port adapter is engineered for improved dust collection. The rubberized palm grip and top handle fit like a glove with even pressure and easy control.

Product description

The Bosch ROS20VSK 5" Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well-blended, ultra-smooth finish. This tool is designed to allow finish carpenters and cabinet makers to complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect speed for whatever task they need to complete, with an optimal on-board system for filtering fine dust.

From the Manufacturer

The Bosch ROS20VS is designed to give even the most exacting finish carpenters, cabinet makers, woodworkers and others exactly what they want, beginning with great performance and results. The optimized combination of pad orbit and rotation delivers fast removal and a well-blended, ultra-smooth finish. Bosch's integral pad dampening system, a pad braking system, is designed to eliminate the most common complaint of random orbit sander users; swirl marks on the workpiece. Finish quality is further enhanced with the use of a soft microcellular backing pad. The pliable pad ensures a smooth, fine finish on flat or contoured surfaces.

• SMOOTH FINISH: Pad dampening system designed to eliminate swirl marks on both flat and contoured surfaces
• EASY DISC ATTACHMENT: Through Bosch's signature Hook and Loop disc attachment system, sanding pads stick to the hand sander, acting like a Velcro-adhesion material
• VARIABLE SPEED CONTROL: Powerful 2. 5 AMP motor allows speed to work-piece and task matching with ease.No Load OPM:7,500-12,000
• DUST COLLECTION: Features a micro filter system for fine dust and trapping particles as small as a 1/2-micron in diameter. Durable and compact, the dust canister shows dust level and easily detaches for mess-free tasks
• KIT CONTENTS: Includes sanding pad, sanding disc, dampening ring, dust canister, vacuum adapter and hard carrying case

User questions & answers

Question:	Is there an adapter or some conversion where I could add a buffing pad? (I realize it's not meant for that
Answer:	No. mine has worked fine, three years later still going strong. Never gets hot.
Question:	I broke the sawdust collector by stepping on it. Where in the world can i order just that piece
Answer:	1/2" Arbor
Question:	Is 1/16" cupping in the disc normal
Answer:	It does not have a horse power rating motor description says a rugged 2.1 amp induction motor have not used it much But has plenty of power for my minimal usage it will see hope that helps you
Question:	will the dust collection connection on the sander body accept a vacuum hose
Answer:	Pretty sure I just used some drywall screws.

Product features

Versatile

Variable-speed control to match speed to workpiece and task

Comfortable

Soft-grip top and body with low-vibration operation

Professional

Delivers fast removal and a well blended, ultra smooth finish

Powerful

2.5 Amp motor allows finish carpenters and cabinet makers to complete their tasks quickly

Product description

This 20V MAX* XR 5-inch Brushless Cordless Random Orbital Sander comes with a 2.0Ah battery and provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the wood sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for quick, easy paper changing.

• Orbital sander with brushless motor provides runtime and efficiency to get the job done
• Variable-speed control of the hand sander from 8,000 to 12,000 OPM to match the speed to the application.
• Low-profile height of the power sander allows user to get close to work surface for precise sanding.
• Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing
• Dust-sealed switch to protect against dust ingestion for long switch life.
• Texturized rubber overmold grip for comfortable sanding
• One-handed locking dust bag

User questions & answers

Question:	Can you get a 6inch sanding pad for this
Answer:	Regular sticky back sanding disks will work
Question:	Can the dust bag be easily replaced with hook up to shop vacuum (without multiple adapters or tape
Answer:	Yes, you can attach the sander directly to the DWV010 or DWV012 dust collectors.
Question:	can this be used for a buffer also
Answer:	The DCW210D1 is designed for sanding only .
Question:	Is this a redesigned battery or will my (several) Dewalt batteries, for my drills, fit this
Answer:	This is a 20v Lithium Ion Battery. If you have 20v Lithium Ion Batteries for your drill which was branded by DeWalt, then they would be interchangeable.

Product features

DEWALT 20V MAX Random Orbit Sander, 5-Inch, Cordless Kit

This 20V MAX XR 5 in. Brushless Cordless Random Orbital Sander comes with a 2.0Ah battery and provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for quick, easy paper changing.

FEATURES

• Dust-sealed switch to protect against dust ingestion for long switch life.
• Texturized rubber overmold grip for comfortable sanding
• One-handed locking dust bag
• To attach dust port to other vacuum systems with 1-1/4 in. hoses, use DWV9000 Universal Quick Connector (sold separately).
• PSA replacement pad available as service part number N373679 (sold separately)

Product description

Makita’s 5-Inch Random Orbit Sander, Model BO5030K, delivers fast, smooth performance with better grip and control. The BO5030K is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander.



The BO5030K features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030K is precision engineered with all ball bearing construction for longer tool life.

Makita's 5-Inch Random Orbit Sander, Model BO5030K, delivers fast, smooth performance with better grip and control. The BO5030K is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander.

View larger

BO5030K Features PERFORMANCE - 1/8" random orbit action SPEED - 3.0 AMP motor rotates pad 12,000 OPM for fast and smooth sanding CONVENIENCE - Uses hook-and-loop abrasive discs for quick changes EFFICIENCY - Efficient through-the-pad dust collection system INCLUDES - Abrasive disc, dust bag and tool case

Tool Specifications Pad size 4-13/16" Abrasive disc size 5" No load speed 12,000 OPM Orbit diameter 1/8" AMPS (115V) 3.0 Overall length 6" Net weight 2.9 lbs.

The BO5030K features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030K is precision engineered with all ball bearing construction for longer tool life.

Comfort and ease-of-use features include an ergonomically designed rubberized palm that fits like a glove with even pressure and easy control. The rubber sealed switch minimizes dust contamination and increases durability. The efficient through-the-pad dust collection system helps provide a cleaner work environment, while the fabric dust bag has an extra wide mouth for faster disposal. The BO5030K uses quick-change five-inch eight-hole hook-and-loop abrasive disc.

Model BO5030K includes abrasive disc, dust bag and tool case. It is ideal for a wide range of sanding applications. The BO5030K is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's Power Tools

Makita delivers precision, accuracy, capacity, and innovation to woodworkers. Makita has full range of miter saws, jig saws, circular saws, routers, planers, sanders, nailers and staplers, blades, compact cordless drills and impacts, and more. Makita's woodworking solutions are engineered for pro contractors, for use in high production settings and in home shops.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

Whats in the Box

Makita BO5030K 5-Inch Random Orbit Sander, abrasive disc, dust bag and tool case.

From the Manufacturer

Smooth and fast sanding with 3.0 AMP motor (12,000 OPM).Large 1/8" random orbit action for fast and super smooth sanding.Pad control system for controlled pad speed upon start-up.Efficient through-the-pad dust collection system for a cleaner environment.Dust sealed swith minimizes contamination.Rubberized grip for improved operator comfort and control.uses quick change 5" (8 hole) hook-and-loop abrasive paper.Oversized sealed ball bearing construction for longer tool life.

• Smooth and fast sanding with 3.0 AMP motor (12,000 OPM)
• Rubberized grip for improved operator comfort and control
• Large 1/8" random orbit action for fast and super smooth sanding
• Pad control system for controlled pad speed upon start-up
• Efficient through-the-pad dust collection system for a cleaner work environment
• Dust-sealed switch minimizes contamination
• Uses quick-change 5" (8-hole) hook-and-loop abrasive paper (abrasive paper sold separately)

User questions & answers

Question:	is this price for one thing
Answer:	No
Question:	Why is the tool with case cheaper
Answer:	The one without case is variable speed, I think
Question:	Se puede conectar a 220v?o solo
Answer:	La lijadora funciona a 110 v solamente
Question:	is it available in 220V version
Answer:	Thank you for contacting CPO! No, we do not sell 220V versions of this unit. If we can be of further assistance, please do not hesitate to contact us.Sincerely,CPO Customer Care800-714-0918www.CPOoutlets.com

Product features

Makita 5" Random Orbit Sander

Makita’s 5-Inch Random Orbit Sander delivers fast, smooth performance with better grip and control. It is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander.

Sander features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The sander is precision engineered with all ball bearing construction for longer tool life.

Comfort and ease-of-use features include an ergonomically designed rubberized palm that fits like a glove with even pressure and easy control. The rubber sealed switch minimizes dust contamination and increases durability. The efficient through-the-pad dust collection system helps provide a cleaner work environment, while the fabric dust bag has an extra wide mouth for faster disposal.

Product description

The DEWALT DWE6411 1/4 Sheet Orbital Finish Sander features a 2.3 AMP motor which sands at 14,000 OPM. A rubber overmold texture will provide smooth and comfortable control while sanding. It has an improved paper clamp features for better paper retention, and a locking dust-port system that allows the user to lock vacuum hose up with the sander. The reduced overall height of the sander to get the user closer to their work, while the separate counterweight design reduces vibration. It also features a rubber dust boot over the switch to protect against dust ingestion for longer switch life. Includes: 1/4 sheet sander, paper punch, owners manual, Dust Bag.

• 2.3 AMP motor which sands at 14,000 OPM
• Improved paper clamp features for better paper retention
• Locking dust-port system that allows the user to lock vacuum hose
• Separate counterweight design reduces vibration
• Rubber dust boot over the switch to protect against dust

User questions & answers

Question:	Can 4-1/2” sticky back sand paper be used with this unit? Thank you
Answer:	don't think so it has a rubber mat backing don't think the glue will stick very well, I used whole sheet 8 1/2 X 11 and cut it in half and trim the edges give you more choices on the paper
Question:	What size length x width sandpaper does this sander use
Answer:	I buy full sheets of sandpaper then cut them up myself. Get 4 per sheet. I use Festool Granat 9 x 11 paper.
Question:	Do you have to have 'holes' in the sandpaper to use it
Answer:	The answer is that no you do not have to have holes in the paper to use it, but if you do not have the holes you will not be able to utilize the vacuum capability of removing the dust created by the sander. If this is not a factor and you have other was to remove the dust or are working outside then this will not be a factor.
Question:	What is the purpose of the extra metal plate
Answer:	If you asking about the plate with the raised pegs it's to perforate your sandpaper so the dust collector will work properly.