6 best trane gas furnaces

Trane is a well-known brand in the heating, ventilation, and air conditioning (HVAC) industry, and they manufacture a range of gas furnaces designed to provide efficient and reliable home heating. Here's some information about Trane gas furnaces:

  1. High-Quality Heating: Trane gas furnaces are known for their high-quality heating performance. They are designed to effectively and evenly distribute warm air throughout your home, ensuring comfort during cold seasons.

  2. Energy Efficiency: Trane offers a variety of energy-efficient furnace models that can help homeowners reduce their energy bills. Many Trane furnaces have high Annual Fuel Utilization Efficiency (AFUE) ratings, which measure how efficiently the furnace converts fuel (natural gas or propane) into heat.

  3. Variable-Speed Blowers: Trane furnaces often feature variable-speed blowers. These blowers can adjust their speed to match the heating requirements of your home, resulting in improved comfort and energy savings.

  4. Quiet Operation: Trane focuses on minimizing noise levels in their furnaces. Many models are designed to operate quietly, reducing disturbances in your home.

  5. Durability: Trane is known for its durable and long-lasting HVAC equipment. Their furnaces are built to withstand the rigors of regular use and come with warranties to provide peace of mind.

  6. Advanced Control: Trane offers advanced thermostat and control options, allowing homeowners to fine-tune their heating system for optimal comfort and efficiency. Some models are compatible with smart thermostats for remote control and automation.

  7. Air Quality: Trane furnaces often include features to improve indoor air quality, such as air filtration systems and compatibility with air purifiers and humidifiers.

  8. Professional Installation: It's important to have a Trane furnace installed by a certified HVAC professional to ensure proper setup, safety, and efficiency.

  9. Maintenance and Repairs: Trane provides maintenance guidelines to keep your furnace operating at peak performance. If repairs are needed, it's recommended to contact a Trane-authorized service provider for expert assistance.

  10. Product Range: Trane offers a variety of gas furnace models to meet different heating needs and budgets. They have single-stage, two-stage, and modulating furnaces, allowing homeowners to choose the level of heating precision they desire.

In summary, Trane gas furnaces are recognized for their quality, efficiency, and advanced features in the HVAC industry.When considering a Trane gas furnace for your home, it's essential to consult with a professional HVAC technician who can help you select the right model and ensure proper installation and maintenance.

Below you can find our editor's choice of the best trane gas furnaces on the market
  

Trane SEN01114 Flame Sensor

Trane

Based on 497 reviews Check latest price

Product description

This is an O.E.M. authorized part. Fits various Trane models. OEM Part Number SEN01114. Made in United States.

  • This is an O.E.M. authorized part
  • Fits various Trane models
  • OEM Part Number SEN01114
  • This is a Trane replacement part
  • Part Number SEN01114
  • This is an O.E.M. part

User questions & answers

Question: Will this part work for a trane model #tuh2b080a9v3vaa
Answer: Hi A customer,Have a nice day.Thank you for your message. All Eyeskey Optics products have been covered by a Limited Lifetime Warranty. Eyeskey Optics guarantees these products to be free of defects in materials and workmanship for the lifetime of the original owner. These warranties do not cover consumer caused damages such as misuse, abuse or repairs attempted by someone other than our authorized technicians. If you have any question, please feel free to let us know. Thank you very much.Best Regards,Klay
Question: Will this part fit trane furnace xb80 serial #tde060a936m
Answer: Yes, it comes with a user manual.
Question: Is this correct for model tud2c080a9v4vba
Answer: Very little is in the manual. You will need another source for education
Question: Will this work with trane xe78Tud080c936a
Answer: Yes it is! They are liquid filled, so it is very shake proof! Sincerely, Austin Sun Company, Inc.

SEN01114 SEN0491 Flame Sensor Replacement Part for Trane American Standard Gas Furnace B340888-1

Based on 37 reviews Check latest price

Product description





Material:metal&plastic

The flame sensor monitors the burner to detect whether or not a flame is present by sending a DC current through the sensor via the flame itself, received by the computer. If the flame sensor is defective, the furnace may not heat, or start and/or shut off after a few seconds to a minute continuously or intermittently after starting.  This part is the most commonly replaced part (after the air filter) Order today



Fit Lennox Model :ADD1B080A9451AB ADD1B080A9H31AA ADD1B080A9H31BA ADD1B080A9H31BB ADD1B100A9451AA ADD1B100A9451AB ADD1C100A9481AA ADD1C100A9481AB ADD1C100A9541AA ADD1C100A9541AB ADD1C100A9H51AA ADD1C100A9H51BA ADD1C100A9H51BB ADD1C120A9541AA ADD1C120A9541AB ADD1D120A9601AA ADD1D120A9601AB ADD1D120A9H51AA ADD1D120A9H51BA ADD1D120A9H51BB ADD1D140A9601AA ADD2B060ACV32AA ADD2B060ACV32AB ADD2B080ACV32AA ADD2B080ACV32AB ADD2C100ACV52AA ADD2C100ACV52AB ADD2D120ACV52AA ADD2D120ACV52AB ADE1A060A9361AA ADE1A060A9361AB ADE1B060A9361AA ADE1B060A9361AB ADE1B080A9451AA ADE1B080A9451AB,etc.

Not all applicable models are listed,if you have any question please contact us.



There are no instructions included in this.If you want too know how to use or install it,Please contact us,we will provide help as much as possible.

  • ★Part Number: SEN01114 Furnace Flame Sensor.
  • ★Replaces Number: SEN01114, SEN1114, SEN0337, SEN0441, SEN441, SEN491, SEN0491, SEN00491, and B340888P01,etc
  • ★2" From Mounting Flange to Bend - Ceramic Length 1-1/2" - 1/4" Male Quick Connect Termina.
  • ★Easy instill:Fix it yourself is simple and cost-effective.
  • ★Please make sure to check your original part to confirm that you are buying correct product.

User questions & answers

Question: Will this work on a trane tud2b060a9v3vb model
Answer: A: No! Lids melt and misshape easily in the microwave. Leaving the lid slightly off center results in the lid forming a tight seal on its own, then melting during microwave operation.
Question: My furnace model # looks like it says tux080c936 or tux080r936 or tux080p936. I can't read the one letter on the label. Do you have a list this fits
Answer: It’s 24k gold plated other than that I’m not sure
Question: Will this work on a Trane XL80 furnace
Answer: the weight is 0.09kg
Question: Will this work on a trane xr80 tud040c924ko model
Answer: I wouldn’t. If going from 1wire to 4wires I’d start at 0 and then you can run 4-8 guage wires but your always better off with one solid connection all the way through so I recommend 4 runs to power source

2-Pack SEN01114 SEN0491 Flame Sensor Replacement Part for Trane American Standard Gas Furnace B340888-1

Based on 67 reviews Check latest price

Product description





Material:metal&plastic

The flame sensor monitors the burner to detect whether or not a flame is present by sending a DC current through the sensor via the flame itself, received by the computer. If the flame sensor is defective, the furnace may not heat, or start and/or shut off after a few seconds to a minute continuously or intermittently after starting.  This part is the most commonly replaced part (after the air filter) Order today



Fit Lennox Model :ADD1B080A9451AB ADD1B080A9H31AA ADD1B080A9H31BA ADD1B080A9H31BB ADD1B100A9451AA ADD1B100A9451AB ADD1C100A9481AA ADD1C100A9481AB ADD1C100A9541AA ADD1C100A9541AB ADD1C100A9H51AA ADD1C100A9H51BA ADD1C100A9H51BB ADD1C120A9541AA ADD1C120A9541AB ADD1D120A9601AA ADD1D120A9601AB ADD1D120A9H51AA ADD1D120A9H51BA ADD1D120A9H51BB ADD1D140A9601AA ADD2B060ACV32AA ADD2B060ACV32AB ADD2B080ACV32AA ADD2B080ACV32AB ADD2C100ACV52AA ADD2C100ACV52AB ADD2D120ACV52AA ADD2D120ACV52AB ADE1A060A9361AA ADE1A060A9361AB ADE1B060A9361AA ADE1B060A9361AB ADE1B080A9451AA ADE1B080A9451AB,etc.

Not all applicable models are listed,if you have any question please contact us.



There are no instructions included in this.If you want too know how to use or install it,Please contact us,we will provide help as much as possible.

  • ★Part Number: 2 PC SEN01114 Flame Sensor. The dimension of the SEN01114 flame sensor is 3.4 inch*2.1 inch.
  • ★Replaces Number: SEN01114, SEN1114, SEN0337, SEN0441, SEN441, SEN491, SEN0491, SEN00491, and B340888P01,etc
  • ★2" From Mounting Flange to Bend - Ceramic Length 1-1/2" - 1/4" Male Quick Connect Termina.
  • ★Easy instill:Fix it yourself is simple and cost-effective.
  • ★Please make sure to check your original part to confirm that you are buying correct product.

Duralight Furnace Hot Surface Ignitor Direct Replacement For Trane American Standard IGN00034 and IGN00054

Based on 104 reviews Check latest price

Product description

This ignitor is the "narrow" style used by Trane and American Standard. The ceramic block on this ignitor is 1-1/4" wide, 1-3/16" deep, and 1/2" thick on the edge without the ridge. There is a locating ridge on the top right corner of the ceramic block when viewed from the wire end. The heating element portion of the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a plug housing that has two "D" shaped plastic prongs and two latching claws on the sides. This connection style was used on many Trane and American Standard furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Trane and American Standard part numbers B340039P01, IGN34, and IGN00034. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

  • Duralight Two Year Warranty
  • Made In USA
  • Direct Replacement Part For Many Trane and American Standard Furnaces
  • Includes Two High Temp Ceramic Wire Nuts
  • Replaces Part Numbers B340039P01, IGN34, IGN00034, IGN54, and IGN00054

User questions & answers

Question: does this work for ign
Answer: Yes, they’re Pyrex.
Question: will this work on avtrane xe80 model tud080c936b
Answer: Yes, you can order lids separately on Amazon.
Question: Will this replace ign
Answer: Hi Clarairan! The 2 cup is 4.75'' in diameter, the 4 cup is 6'' in diameter and the 7 cup is 7.5'' in diameter.
Question: is the part a replacement for norton 271N
Answer: The lids and the bowls have "Made in USA" molded into them.

4-Pack SEN01114 Furnace Flame Sensor Replacement Part for Trane & American Standard Furnace - Replaces SEN0491 SEN00491

Based on 33 reviews Check latest price

Product description





Material:metal&plastic

The flame sensor monitors the burner to detect whether or not a flame is present by sending a DC current through the sensor via the flame itself, received by the computer. If the flame sensor is defective, the furnace may not heat, or start and/or shut off after a few seconds to a minute continuously or intermittently after starting.  This part is the most commonly replaced part (after the air filter) Order today



Fit Lennox Model :ADD1B080A9451AB ADD1B080A9H31AA ADD1B080A9H31BA ADD1B080A9H31BB ADD1B100A9451AA ADD1B100A9451AB ADD1C100A9481AA ADD1C100A9481AB ADD1C100A9541AA ADD1C100A9541AB ADD1C100A9H51AA ADD1C100A9H51BA ADD1C100A9H51BB ADD1C120A9541AA ADD1C120A9541AB ADD1D120A9601AA ADD1D120A9601AB ADD1D120A9H51AA ADD1D120A9H51BA ADD1D120A9H51BB ADD1D140A9601AA ADD2B060ACV32AA ADD2B060ACV32AB ADD2B080ACV32AA ADD2B080ACV32AB ADD2C100ACV52AA ADD2C100ACV52AB ADD2D120ACV52AA ADD2D120ACV52AB ADE1A060A9361AA ADE1A060A9361AB ADE1B060A9361AA ADE1B060A9361AB ADE1B080A9451AA ADE1B080A9451AB,etc.

Not all applicable models are listed,if you have any question please contact us.



There are no instructions included in this.If you want too know how to use or install it,Please contact us,we will provide help as much as possible.

  • ★Part Number: SEN01114 Flame Sensor 4-Pack. The dimension of the SEN01114 flame sensor is 3.4 inch*2.1 inch.
  • ★Replaces Number: SEN01114, SEN1114, SEN0337, SEN0441, SEN441, SEN491, SEN0491, SEN00491, and B340888P01,etc
  • ★2" From Mounting Flange to Bend - Ceramic Length 1-1/2" - 1/4" Male Quick Connect Termina.
  • ★Easy instill:Fix it yourself is simple and cost-effective.
  • ★Please make sure to check your original part to confirm that you are buying correct product.

User questions & answers

Question: I want to use this sensor with a garden propane burner , what type of controller should I used with it
Answer: Hi! The rectangle dishes are 7.25'' wide x 5.5'' deep x 1.75'' high.

Emerson 768A 815 Hot Surface Ignitor, 80V, Silicon Nitride

Emerson Thermostats

Based on 262 reviews Check latest price

Product description

The Emerson 768A-815 hot surface ignitor features white Teflon coated leads, and 2 terminal amp receptacle with 083 inch female sockets. This ignitor must be used with hot surface ignition for residential furnaces (silicon nitride replacement only).

  • Silicon nitride 80V hot surface ignitor
  • 2 Terminal amp receptacle with 083-inch female sockets
  • Must be used with hot surface ignition for residential furnaces
  • Country of Origin: Mexico

User questions & answers

Question: compatibale with american standard freedom 80 furnace ADD080C936 EO
Answer: The 13 x 9 dish measures 13 x 9 inside but molded glass handles make the overall length 16.5 inches. The outside width is 9.75 and the overall height is 2.5 inches.
Question: Is this the same as 768a-15? I dont havr the 8 before the 15. Looks about exactly like it. I do not want to get some other part as some have said
Answer: I've done this with no problems. The instructions state, "As soon as possible, & no more than two minutes after removing the Pyrex glassware from the oven, put the plastic lid directly on the hot dish. Immediately place dish in carrying case". I hope this helped.
Question: Is there any warranty on this item
Answer: The 4 cup round containers are (6" x 2.75") and the 3 cup rectangle containers are (7.5'' wide x 5.5'' deep x 1.5'' high ).
Question: A DB600 showed up instead of the 768A-815. It looks like it's a discontinued product. Will this work well in my Trane furnace
Answer: Hi Rachel! Our Pyrex set meets the current safety standards.

Latest Reviews

View all