13 best power disc sanders

Product description

Remember when you could sand those hard to reach places? the WEN variable speed drywall Sander goes where no Sander has gone before. With a pivoting 8.5-Inch head that swivels in all directions, the WEN drywall Sander automatically adjusts to be flush against every surface that crosses its path. Adjust the speed anywhere from 600 to 1500 RPM to meet the needs of the project at hand. The hook and loop base Pad makes Sandpaper changes a breeze while the Foldable design allows for simple storage and transportation. The lightweight 9-pound body telescopes to reach lengths up to five feet away. This package also includes six pieces of hook and loop Sandpaper Disks (60, 80, 120, 150, 180 and 240 Grit) along with a flexible dust vacuum hose that stretches up to 15 feet for reliable dust removal. And because it's a WEN product, your variable speed drywall Sander comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer helpline. Remember when you could reach the unreachable? remember WEN.

• Variable speed adjustment operates anywhere from 600 to 1500 RPM
• Hook-and-loop base pad makes changing sandpaper easier than ever
• 5-Amp head-mounted motor provides maximum torque to the sanding disk
• Automatic dust removal system combined with the 15-foot dust hose minimizes Clean-up
• Includes 60, 80, 120, 150, 180 and 240 grit hook-and-loop 9-inch sanding discs

User questions & answers

Question:	Can it be used with a ridgid shop vac
Answer:	It uses drywall sand screen. Yes you must attach the sand screen. If you use sand paper, the attached vacuum will not pickup the drywall particles.
Question:	Can you buy replacement head pad
Answer:	The bottom is actually a slightly hardened rubber with a Groove pattern in it for allowing the Dust to flow to the vacuum tube
Question:	How many holes does it have for the sand paper? (8 or
Answer:	it was able to adjust to both the 1 7/8" and 2" size hoses without problems. Note: I did find the need to use duct tape at the shop vac to minimize the fine dust and routed the output out the window to keep the dust to a minimum.....
Question:	Do u have 180 sandpaper or
Answer:	I just tear 9" X 11" sheets in half long ways.

Product features

Hook & Loop Base Pad

The hook and loop base pad makes switching between the 6 included combination-grit sanding discs a breeze.

360˚ Pivoting Head

The 8.5" head swivels in all directions and automatically adjusts to be flush against every surface that crosses its path.

Automatic Dust Removal

Messy workspaces are a thing of the past. The flexible dust vacuum hose stretches up to 15 feet for reliable dust removal.

Variable Speed Motor

The variable speed dial allows for simple adjustments anywhere from 600 to 1500 RPM while the 5-amp head-mounted motor design maximizes torque during operation.

Product description

3M Elite Central-Vacuum-Ready Random Orbital Sanders deliver professional, dust-free performance along with a swirl-free finish, hour after hour in high-production industrial environments where dust extraction is required.

From the Manufacturer

3M Elite Central-Vacuum-Ready Random Orbital Sanders are best-in-class tools designed to optimize the performance of 3M abrasives. Built with a powerful, precision-balanced air-driven motors and durable lightweight aluminum housing, these ergonomically designed workhorses stand up to industrial production and reduce user fatigue for hours of comfortable operation.Elite central-vacuum-ready sanders can be connected to a central vacuum system or used with an external portable vacuum such as a shop vacuum. It has a threaded attachment feature that enables easy yet secure attachment and detachment of a 1" external threaded vacuum hose (sold separately) to effectively eliminate dust from the workpiece and surrounding space.



High Performance, Superior Ergonomics

Designed with the operator in mind, 3M Elite Central-Vacuum-Ready Random Orbital Sanders are loaded with ergonomic features that decrease work strain and improve productivity.



Wrist and hand support

• Extended curved wrist rest reduces stress on hand and wrist and provides additional leverage
• Recessed lever platform eliminates pinch and pressure points on the operator's palm
• Three grip sizes enable operator preference. The grip diameter on the tool is 2-3/4” with two additional grip sizes available (diameters of 2-1/2” and 3” sold separately)

Reduced vibration

• The rubber grip absorbs and reduces vibration and features 3M Gripping Material for a stronger grip and more control with less effort
• Durable composite cover extends to the base to absorb vibration and keeps tools in service by preventing cracked housings

Enhanced safety features

• Internal muffler protects operator hearing and will not break off
• Convenient thumb-controlled speed dial reduces inadvertent speed changes

Why Choose a Random Orbital Sander?

3M random orbital sanders optimize sanding and surface preparation on wood, metal, fiberglass and composite materials, and many other substrates. Also known as dual action (D/A) palm sanders, these industrial-grade tools rotate the abrasive disc and disc pad in two simultaneous overlapping oval patterns so no single abrasive particle follows the same path twice, producing a random scratch and swirl-free finish ready for paint or varnish.

• Precision-balanced steel workings and powerful air driven motors run smoothly with less vibration, ideal for high production industrial environments
• Improved durability, ergonomics and noise level maximize comfort and control for prolonged use
• Pneumatic power exceeds the capability of standard electric sanders, supplying hours of continual use
• Aluminum body and durable composite cover reduce cracked housings and downtime
• Composite cover to prevent crack housings
• Precision-balanced steel workings and powerful air driven motors run smoothly with less vibration, ideal for high production industrial environments
• Improved durability, ergonomics and noise level maximize comfort and control for prolonged use

User questions & answers

Question:	Can I use this for damp/wet sanding on automotive finishes
Answer:	I am not sure I can answer your question with any authority but it appears to me that the larger orbit size makes it more aggressive. That said the 3 M sanders work very well. I have both a 6” and 3” sander and I use ten with everything from 40 grit to 1000. I am very happy with both. BTW, I purchased the larger orbit.
Question:	My compressor is 4.6cfm@90psi. Can I run this sander for woodworking purposes? If not could you please recommend a good alternative
Answer:	1/2 HP
Question:	What is the relationship between stock removal and orbit size ? I am looking to do fine work with composites
Answer:	I measured mine the best I could and they seem to be 2 1/4 inches in diameter.Hope this helps out.Jim

Product features

3M Elite Central-Vacuum-Ready Random Orbital Sanders

3M Elite Central-Vacuum-Ready Random Orbital Sanders deliver professional, dust-free performance along with a swirl-free finish, hour after hour in high-production industrial environments where dust extraction is required

Product description

Heavy duty cast iron construction with a heavy duty trunion assembly supporting the Table. Powerful 1/2 HP, 120V motor for long lasting, smooth operation. Convenient top-mounted manual brake stops the sanding disc in seconds. Cast iron table tilts left and right with positive stops at 22.5, 45 and 90-Degrees and locks in place with one dual purpose lock and bevel table adjustment handle. Superior integral dust collection fan draws dust away from the table and into the hose for cleaner sanding operation.Unit features a 3/8-Inch by 3/4-Inch miter guage slotmachined into the cast iron table for projects that require sanding at an angle or straight edge.

• Dust collection draws from under the table, 2 1/2in OD attaches quickly to any standard shop vac or dust collector
• Cast Iron Base with pre-drilled holes for easy bench mounting
• Backed by a 5 year warranty

User questions & answers

Question:	What kind of metal is the disc made of
Answer:	Yes it does. At least mine did. I would highly recommend checking the bed and disc for flatness. Mine came with a concave disc that was so bad that I needed to return it.
Question:	What's the difference with other same products
Answer:	Stand on the left. disc rotates counterclockwise
Question:	Does the sander come with any sandpaper
Answer:	Yes
Question:	when facing the disc does it rotate clockwise or counterclockwise? i.e. do you sand on the right or the left
Answer:	it will run but your compressor will not keep up with it. you will need at least 13-15cfm @90 psi to run a pneumatic sander. i’d recommend getting an electric or battery powered sander. milwaukee makes a cordless m18 random orbit sander.

Product features

Pure Power, Built-to-Last, Fully Featured Performance

Pure Power Raw Torque

The Delta 31-140 is Powered by a 1/2 horse power direct drive motor that produces 1,750 rpm. This is a high torque tool able to withstand the punishment of a production environment!

Built-to-Last

Cast iron construction, solid steel sanding disc and a heavy duty steel bevel assembly supporting the table so you can load this tool up.

Fully Featured

Easy to reach top-mounted manual brake stops the sanding disc in seconds combined with an integral dust collection fan which draws dust away from table and into the hose for faster sanding operation and a cleaner work space.

• ✨Ginour provide free replacement & LIFETIME Warranty☛✉[email protected] ☛ https://www.facebook.com/ginour.us
• ✨【MULTIPLE ACCESSORIES】 12 * sanding discs (K80-K100-K120-K150-180-K240), 2 * Carbon Brushes; 1 * Dual-purpose Screw Driver; 1 * Socket Wrench; 1 * 13ft Dust Hose; 1* Dust Collection Bag; 1*User Manual
• ✨【EXCELLENT DESIGN】：9-inch head can 360° rotate in different directions, removable bottom for grinding to the edge or perpendicular wall. Floating head allows for a swing up and down from side to side which designed for automatic adjustment for uneven walls, fluctuation range is 1-10mm
• ✨【7 VARIABLE SPEED 】: Min /1/2/3/4/5/ Max, 7-level variable speed dial allows user to set 1000/1800 RPM according to different applications. The dry sander weighs 4.8 kg. For some people, the machine may be a bit heavy. We recommend that customers take a break when working long hours
• ✨【EXTENSIBLE HANDLE & LED LIGHT】: Equipped with a aluminum alloy extension rod, the handle can be extended to 5.5ft. The detachable handle design for simple storage and easy to move. Come with LED light around the base pad, improving brightness for dark workplace
• ✨【 AUTOMATIC DUST REMOVAL】：Automatic dust removal system eligible for 98% dust absorption. Combined with a 13-feet flexible dust hose and a dust bag with zipper reach the perfect dust collection effect. Of course, user can hook to a shopvac

Product features

Electric drywall sander which is designed for sanding walls and ceilings

Automatic vacuum & Powerful motor & LED & 7-Level Variable Speed & 360°Pivoting Head & Extensible Handle & 6 PCS sanding discs

• 7-Level Variable : The variable no-load speed motor operates from 1000 to 1800Rpm
• For Corner/Ceiling : 9-inch head can 360° rotate in different directions, removable bottom for grinding to the edge or perpendicular wall
• For uneven walls：Floating head allows for a swing up and down from side to side which designed for automatic adjustment for uneven walls
• Cleaning：Automatic dust removal system eligible for 98% dust absorption. Combined with a 13-feet flexible dust hose and a dust bag with zipper reach the perfect dust collection effect
• Lock button : Keeping the current speed constant, reducing the pressure on the motor that has been working for a long time
• Accessory : Supplied with 12pcs hook and loop sanding discs ( 80, 100, 120, 150, 180, 240 grit )

Keep cleaning

Automatic dust removal system eligible for 98% dust absorption

Combined with a 13-feet flexible dust hose and a dust bag with zipper reach the perfect dust collection effect

For sanding ceiling

9-inch head can 360° rotate in different directions, remove chassis edge for grinding to the edge or perpendicular wall

7-Level variable speed

750W powerful motor provides 7-level variable speed dial allows user to set 1000/1800 RPM according to different applications

Product description

5" Extreme ROS, NV, 3/16", PSA 12K RPM. New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction. Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator’s palm.

• American-made from the highest grade materials for long-life and high durability.
• New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs
• Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort
• Premium sanding pad is weight-mated for the lowest vibration levels. Made from the highest quality materials for extreme durability and longevity.

User questions & answers

Question:	What is the orbit on this sander
Answer:	The factory nuts on our JLU worked on our wheels, so yours should also. The lug nuts can work as long as they are cone/conical/tapered seat and are not wider than 1.25". Please check this prior to installation.
Question:	Is this sander vacuum
Answer:	These are not compatible with a 2018 Honda Ridgeline. Your vehicle has 5x120 bolt pattern and these wheels are 5x127. You could get them to fit if you purchased a 5x120 to 5x127 adapter. However, this is not recommended as it will push the wheels out too far.
Question:	This is a 5 inch self adhesive pad non vacuum
Answer:	Yes the RT109 would fit on a JL Wrangler. The JK and JL pictured in the listing are running the -12mm offset, so you have reference of where they would sit. If you want a slightly less aggressive fitment, the +12mm offset will sit ~1" more inwards (ie closer to the suspension) compared to the -12mm offset.
Question:	Does this come with a 5 inch self adhesive pad
Answer:	Unfortunately we do not have plans to bring in 16" versions of our wheels.

Product features

Extreme sanding in any application

Dynabrade proudly introduces our most refined random orbital sander to date. The Dynorbital Extreme boasts the greatest power and most consistent speed of any palm-style orbital sander. Power and speed combine to quickly and reliably produce the desired finish, while ergonomic features keep operators safe and comfortable throughout their day. Symmetrical design allows left or right-handed operators to work comfortably, while the compact size of the Dynorbital Extreme fits naturally in most operator's hands.

Extreme Power

– New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs.

– Most consistent speed under load in industry, running at 92% of rated tool speed.

– New rotor design enhances power with less friction.

Extreme Comfort

– Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort.

– Soft grip co-molded to rigid composite base housing for maximum comfort and durability.

– Recessed throttle lever eliminates pinch and pressure points on an operator’s palm.

Extreme Performance

– Achieve consistent, superior finishes in less time.

– Premium sanding pad is weight-mated for the lowest vibration levels.

– Made from the highest quality materials for extreme durability and longevity.

Dynorbital Extreme

High-performance sanding coupled with best-in-class vacuum pickup.

Extreme Sanding Pad

All new channel design for use with vacuums and multi-hole abrasives. Dust/debris migrates to pad’s center where pick-up is greatest.

Dynacut Extreme Orange

Unique sawtooth spiral vacuum pattern for maximum

dust/debris extraction. Center hole and positive flow moves dust/debris to center of the disc where vacuum pick-up is greatest.

Raptor Vac Vacuum Systems

Designed for specific environments and dust collection requirements in both pneumatic and electric motor configurations. Certified explosion-proof systems are available for combustible dusts.

Product description

Shop Fox W1828 12" Disc Sander w/ 1Hp 1,700 Rpm Fan Cooled Direct Drive Motor

• Motor is 1HP, 110V, single-phase, 10A, 1725 RPM
• 15-3/4-inch width by 4-1/2-inch depth table
• Ball bearing construction
• Powder coated paint
• Safety switch with disabling key

User questions & answers

Question:	How does this sander perform on ferrous metals
Answer:	Size and power. I have both sets.
Question:	Has your opinion of this Shop Fox sander improved, since writing your review? Or, become more critical? Kindly explain, please
Answer:	Astro's website says 3 cfm average.
Question:	What is the distance from the miter inside edge to the disc? I need a sander with at least 3 inches for an angle jig I like. Thanks
Answer:	Not loud at all and no
Question:	Does it have a disc brake
Answer:	I have had my set for several years now. The RPMs is easily controlled by turning and adjustment dial (essentially a flathead screw) on the top. Trigger control is pretty smooth, I've never had a problem slowing or speeding up the tool.

Product features

Shop Fox W1828 Disc Sander

This production style 12-inch Disc Sander is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45-degrees and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications. Uses 12-inch pressure sensitive adhesive sanding discs.

Deluxe Miter Gauge

This sander includes a deluxe miter gauge for moving workpieces into the sanding disc at a specific angle. To use the miter gauge simply slide it into the miter slot, loosen the lock knob, set the angle, then re-tighten the knob.

Degree Scale

The easy-to-read degree scale lets you know your exact sanding angle for precision and accuracy.

Safety Switch

The W1828 features a safety paddle switch which provides a greater degree of safety over other types of 'On/Off' switches due to its oversize paddle and removable lock-out key. No more fumbling around to find the 'Off' button. Simply slap the paddle down to switch off power.

Product description

Drywall sander

• 【Vacuum Sunction】Electric sander has a self suction that collects dust into the bag through a hose. Prevents you from inhaling a lot of dust at work, creating a healthy working environment for you
• 【Detachable Handle】Ergonomic grip is beefy and rugged, lightweight body can quickly complete the work even in the most difficult tasks. With a detachable handle, it can be installed on either side of this drywall sanding machine for the convenience of left-handed and right-handed users
• 【Variable Speed】750W motor provides strong power with lower electricity consumption, the speed of this sander can be set from 770rpm to 2,150rpm, 6 speeds adjustments for different needs of your project
• 【Surrounding LED Light】The high quality 2 strips LED lights surrounded the head offer a convenient working condition, it provides brightness for meticulous sanding work in the dark environment, excellent for low light conditions
• 【Self-Sunction Adjustknob】you can move the sanding disc easier according to adjust the self suction knob; and It comes with 4 gaskets(2 pre-installed) to extend the sanding pad, if the sanding pad sits below the plastic rim

Product description

The All NEW Genesis 4.3A Belt Disc Sander works great for removing splinters and rough edges from woodworking projects around the home. With the power of a belt platform and 6 inch disc you can shape and finish all of your DIY projects! A Belt speed of 1,900 FPM and Disc speed of 3,600 RPM your next project will be completed in less time than other manual or handheld sanding tools! The 39 lb base can be mounted to a benchtop surface for steady & safe operation. Remove jagged and rough edges from your wood and lumber with ease and enjoy the results of your work with the 4.3A Belt and Disc Sander from Genesis!

• 4.3 Amp Induction Motor for Quiet, Smooth Performance
• Quick-Release Belt Change System
• Belt Tracking Knob for Easy Belt Adjustment
• Heavy Cast-Iron Base with Pre-Drilled Holes
• Includes: 80 Grit 4'x36" Sanding Belt, 80 Grit
• 2 Year Warranty

Product description

The 6" Disc is positioned so it does not protrude above the belt, allowing you to sand the full range of your work.

• Cast Iron and Steel Construction. Heavy duty base provides vibration-free operation
• Belt Speed 1900 SFPM Helps finish the workpiece fast with smooth results
• Disc Speed 3450 RPM Direct drive for increased torque and reliability

User questions & answers

Question:	WHAT IS THE HORSE POWER
Answer:	I would suggest you contact Rikon directly - I have found them to be very helpful. The belt is easy to replace and should not be expensive.
Question:	What is the diameter of the belt rollers
Answer:	Does this come with a sanding belt and disc attached? What grade is the sandpaper?
Question:	I need a drive belt for this rikon beltsander
Answer:	Not sure what holes are you talking about, but assuming that the back up pad on your sander has holes to absorb the dust, most sanding discs come without holes except Festool brand. You can find them here in Amazon depending on the grit that you need.
Question:	Does it come with any sandpaper
Answer:	Technically speaking, you don't even need a vacuum. It's got built-in suction and the exhaust is blown into the bag. I don't use the bag. Nearly any vacuum will work, but some are more appropriate than others, and I would highly suggest putting a bag in your canister vac before using it with drywall.

Product description

6" Extreme ROS, CV, 3/16", 12K RPM. New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction. Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator’s palm.

• American-made from the highest grade materials for long-life and high durability.
• New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs
• Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort
• Premium sanding pad is weight-mated for the lowest vibration levels. Made from the highest quality materials for extreme durability and longevity.

Product features

Extreme sanding in any application

Dynabrade proudly introduces our most refined random orbital sander to date. The Dynorbital Extreme boasts the greatest power and most consistent speed of any palm-style orbital sander. Power and speed combine to quickly and reliably produce the desired finish, while ergonomic features keep operators safe and comfortable throughout their day. Symmetrical design allows left or right-handed operators to work comfortably, while the compact size of the Dynorbital Extreme fits naturally in most operator's hands.

Extreme Power

– New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs.

– Most consistent speed under load in industry, running at 92% of rated tool speed.

– New rotor design enhances power with less friction.

Extreme Comfort

– Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort.

– Soft grip co-molded to rigid composite base housing for maximum comfort and durability.

– Recessed throttle lever eliminates pinch and pressure points on an operator’s palm.

Extreme Performance

– Achieve consistent, superior finishes in less time.

– Premium sanding pad is weight-mated for the lowest vibration levels.

– Made from the highest quality materials for extreme durability and longevity.

Dynorbital Extreme

High-performance sanding coupled with best-in-class vacuum pickup.

Extreme Sanding Pad

All new channel design for use with vacuums and multi-hole abrasives. Dust/debris migrates to pad’s center where pick-up is greatest.

Dynacut Extreme Orange

Unique sawtooth spiral vacuum pattern for maximum

dust/debris extraction. Center hole and positive flow moves dust/debris to center of the disc where vacuum pick-up is greatest.

Raptor Vac Vacuum Systems

Designed for specific environments and dust collection requirements in both pneumatic and electric motor configurations. Certified explosion-proof systems are available for combustible dusts.

• ★【COMPLETE DRYWALL SANDER KIT】Coming with 26ft super long power cord and LED light, built in automatic vacuum system with extra mess sanding discs and safety kit let you start work right away.
• ★【THIS IS A MUST HAVE】This is one energy saving, time saving, emotion saving, lung saving dust-free drywall vacuum sander! No more conventional sanding. No more dust disaster.
• ★【FLOATING HEAD & ADJUSTABLE SUCTION】7 inch pad with floated motion will adjust automatically to make sure the sanding is even. Suction power dial allows adjusting the perceived weight of the drywall power sander.
• ★【WORK FASTER & LESS DUST】6.0A motor provides high power to work efficiently and variable speeds are to meet the needs of the surfaces for both rapid material removal or fine finishes. Drywall sanders with vacuum attachment can collect most of dust to have healthy working environment.
• ★【COMFORTABLE DESIGN & LED LIGHT】 Ergonomic grip is beefy and rugged, lightweight body makes quick work out of even the toughest of tasks. Comes with a detachable handle, it can be assembled to either side of this ceiling sander for both left-handed and right-handed users. LED light with angle adjustable helps you work conveniently at dim condition.
• ★【WHAT YOU GET】1 x CUBEWAY drywall electric sander (26ft power cord), 6 x sanding discs+4 x mess sanding discs, 1 x set of safety kit(1 x goggle 1 x earplugs, 1 x mask ), 1 x dust collection bag, 2 x vacuum hose connectors, 1 x vacuum hose converter, 1x dust extracting hose, 1x hex wrench, 2 x carbon brushes, 2 x gaskets, 1 x manual and one year quality guarantee.

Product features

What you get

1 x CUBEWAY electric drywall sander with 26ft power cord,

6 x sanding discs+4 x mess sanding discs,

1 x set of safety kit(1 x goggle 1 x earplugs, 1 x mask ),

1 x dust collection bag,

3 x vacuum hose connectors,

1 x dust extracting hose,

1x hex wrench,

2 x carbon brushes

• 🏡Higher Efficiency - 6.5A (800W) motor has more efficient power than most other wall sanders. It has 6 adjustable speeds from 500RPM to 1800RPM, so you can set the corresponding speed. The sander machine can easily cope with wall, roof and corner (Since it is very powerful, customers are advised to wear earmuffs and goggle when using the sander)
• 🏡More Thoughtful - The double-deck LED lights around the bottom of the drywall tools make the working environment brighter, the power cord 4.5M gets rid of the short line trouble. You are free to polish the walls and corners where the light is weak.
• 🏡More Flexible - Equipped with aluminum alloy extension rod, the handle can be extended to 1.9M. Adjustable 90° rotation and removable bottom make sanding edges easier and more convenient. Your electric drywall sander can reach the places hard-to-reach.
• 🏡Higher Cleanliness - The drywall tool has great dust removal efficiency wirh the design of automatic dust collection and turbofan dust collection system. The 2M hose is connected to the dust bag, it can quickly and efficiently concentrate dust into the dust bag.

Product features

TACKLIFE 800W Drywall Sander with 6 Variable Speed

ATTENTION:

The weight of the sander is 6kg. For some person, the machine may be a bit heavy. It is recommended that customers take a break after period of time.

Firstly, insert the extendable rod into the circular hole, adjust the handle to the length you need, and then tighten it.

Next, connect the suction hose to the end of the handle, press the two snaps and release your finger, and make sure it is secure.

Then seal the dust bag with the gray card board.

Finally, connect the other end of the hose to the dust bag.

• 【Various accessories】 12 * sanding disc (K80-K100-K120-K150-180-K240), 2 * carbon brush; 1 * dual-purpose screwdriver; 1 * socket wrench; 1 * 13ft dustproof hose; 1 * set Dust bag; 1 *User manual
• 【Convenient design】The 9-inch head can rotate 360 degrees in different directions, the bottom can be moved, and it can be polished to the edge or vertical wall. The floating head can swing left and right, can automatically adjust the uneven wall surface, the fluctuation range is 1-10mm
• 【LED light and retractable handle】Equipped with LED light, it can improve the brightness of the working environment during use; equipped with a retractable handle, the handle can be extended to 5.5 feet, to meet the different use scenarios of distance and height, and the extension rod can be removed , Reduce the placement space.
• 【Powerful and 7 variable speed】With strong power, fast frosting; Come with an additional pair of carbon brushes, easy to replace the carbon brushes; with min+5+max7 speed adjustment, the appropriate frosting speed can be selected according to different use environments; press to lock Button, one-key lock, simple and labor-saving
• 【Vacuum cleaning function】It adopts the design of self-cleaning function, and is equipped with a light and easy to clean dust bag with a zipper. The dust can be poured out when the zipper is opened. Of course, users can connect to shopvac

User questions & answers

Question:	I have ginour 360 i need more sanding disc. Do you sell the correct ones to match the holes on sander
Answer:	I got mine after a coupe weeks, I even forgot I had bought it 😅
Question:	Can you use any shop vac
Answer:	It does not come with a storage bag. It's also not that easy to break down for storage later. I keep mine in the rafters when I'm not using it.
Question:	I order this sander from November 25 and now is December 7 and still havent shipped. No one contacted to say why
Answer:	These are PSA Pressure sensative adhesive or Peel & Stick
Question:	Is it easy to take apart and store for later? And does it come with a storage bag
Answer:	This Bistro Blade Grinder comes with a 2-year warranty. If your blades have broken within 2 years of purchase, please reach out to [email protected] and they will happy to provide a replacement grinder. We do not sell the blade separately at this time.

Product features

Electric drywall sander which is designed for sanding walls and ceilings

Automatic vacuum & Powerful motor & LED & 7-Level Variable Speed & 360°Pivoting Head & Extensible Handle & 6 PCS sanding discs

• 7-Level Variable : The variable no-load speed motor operates from 1000 to 1800Rpm
• For Corner/Ceiling : 9-inch head can 360° rotate in different directions, removable bottom for grinding to the edge or perpendicular wall
• For uneven walls：Floating head allows for a swing up and down from side to side which designed for automatic adjustment for uneven walls
• Cleaning：Automatic dust removal system eligible for 98% dust absorption. Combined with a 13-feet flexible dust hose and a dust bag with zipper reach the perfect dust collection effect
• Lock button : Keeping the current speed constant, reducing the pressure on the motor that has been working for a long time
• Accessory : Supplied with 6pcs hook and loop sanding discs ( 80, 100, 120, 150, 180, 240 grit )

Keep cleaning

Automatic dust removal system eligible for 98% dust absorption

Combined with a 13-feet flexible dust hose and a dust bag with zipper reach the perfect dust collection effect

For sanding ceiling

9-inch head can 360° rotate in different directions, remove chassis edge for grinding to the edge or perpendicular wall

7-Level variable speed

750W powerful motor provides 7-level variable speed dial allows user to set 1000/1800 RPM according to different applications