8 best sandblasters
A sandblaster is a power tool used in various industrial, automotive, and home improvement applications for surface preparation, cleaning, and finishing tasks.Here's what you need to know about sandblasters:
Basic Function: Sandblasters, also known as abrasive blasters or sandblasting machines, use high-pressure air or other blasting media to forcibly propel abrasive materials, such as sand, glass beads, or steel shot, onto a surface. This process effectively removes rust, paint, coatings, dirt, and other contaminants from a variety of materials.
Applications: Sandblasters are used in a wide range of applications, including:
- Surface Preparation: They are commonly used to prepare surfaces for painting, powder coating, or other finishing processes.
- Rust and Corrosion Removal: Sandblasting can efficiently remove rust and corrosion from metal surfaces.
- Cleaning: Sandblasters can clean surfaces, machinery, and equipment by removing stubborn dirt, grime, and coatings.
- Restoration: They are often used in automotive restoration to strip paint and surface imperfections from cars and parts.
- Etching and Engraving: Sandblasting can be used for artistic applications, such as glass etching and engraving on various materials.
Types of Sandblasters: There are several types of sandblasters available, including:
- Pressure Blasters: These units use compressed air to propel abrasive media at high speeds. They are versatile and suitable for various applications.
- Siphon Blasters: These models use suction to draw abrasive media into the airstream. They are generally less powerful than pressure blasters and are often used for smaller tasks.
- Portable Blasters: Portable sandblasters are designed for ease of mobility and are often used for on-site jobs or smaller DIY projects.
- Cabinet Blasters: Cabinet-style sandblasters have an enclosed workspace that allows for controlled blasting and containment of abrasive media and debris.
Safety Precautions: Sandblasting involves high-speed abrasive particles and dust, which can be hazardous if not used safely. Users should wear protective gear, including goggles, gloves, and respiratory protection, and work in a well-ventilated area or wear a dust collector helmet.
Media Selection: The choice of abrasive media depends on the specific task. Different materials and particle sizes are suitable for various surfaces and applications. It's essential to select the right abrasive media to achieve the desired results.
Maintenance: Proper maintenance of the sandblaster is crucial for its performance and longevity. This includes cleaning and inspecting nozzles, hoses, and the blasting chamber and ensuring that air and media flow are consistent.
Regulations: In industrial and professional settings, there may be regulations and safety standards governing the use of sandblasters, such as the use of containment systems to capture and recycle abrasive media and dust.
DIY and Professional Use: Sandblasters are available in a range of sizes and capacities, making them suitable for both DIY enthusiasts and professional contractors.
Accessories: Various accessories and nozzles are available for sandblasters to achieve different effects, patterns, and levels of abrasion.
Sandblasters are versatile tools with a wide range of applications, but they should be used with care and attention to safety to prevent injury and ensure effective results. Users should follow the manufacturer's guidelines and safety recommendations for the specific sandblaster they are using.
Below you can find our editor's choice of the best sandblasters on the market
Le Lematec Sandblaster Gun Kit with Continuous and Gravity Blasting Functions
LE LEMATEC
- Premium Sand blaster optimal blasting pressure is One Hundred Fifty psi with a minimum of four cfm
- The Sand Blaster Gun Kit has a media compartment supporting various media like steel grit glass beads soda silicon carbide aluminum oxide black diamond and more
- A gravity feed sandblaster gun offering flexibility and perfect for spot sandblasting. It also works as a siphon feed media blaster for small to large scale sandblasting activities
- Perfect for glass etching paint stripping rust grime moss mold and scale on an automobile hot tubs tile pools and other surfaces
- Longer sandblasting action with its ten foot siphon hose and siphon tube best for larger jobs
User questions & answers
| Question: | I have tar on concrete from a messy workman. Black Beauty 20/40 mesh is my plan, will this device support this media. What are my compressor needs |
| Answer: | Hi Craig, thanks for the great question. We have created an extensive media guide that we can send you electronically. If you want this, please contact us through Amazon messenger, this way, we can attach the file to your message. thanks |
| Question: | how many tips come with this |
| Answer: | Hi Craig, we don’t recommend walnut media that is this big in size as you will find that you need more continuous high pressure to meet that media demand |
| Question: | Where can I find out which media are best for which jobs? First job is blasting some water streaking and stains off stone on my house |
| Answer: | The widest point is in fact 1/2" the smallest point is 3/8" |
| Question: | Am i correct in my undstanding that 18-40 grit - medium to fine grit walnut shells will not work with this blaster |
| Answer: | Don’t waste your time with this. It will take you forever. But something bigger. |
Product features
The Gravity Feed and Siphon Feed Sandblaster Gun in One!
Do you have problems figuring out which one to use, gravity feed or siphon feed for your sandblasting activities? Either way, you still have to get separate units depending on your preference. What if you can get the same feature in a single unit? Sounds like it is a perfect tool for any type of sandblasting job.
This is all made possible by Lematec AS118-2 Portable Sandblaster Kit. It is designed to deliver gravity feed (with a suction cup on top) and siphon feed (with 10-foot siphon hose and siphon tube). With this simple and small sandblaster compared to conventional sand blasting equipment with cabinet, the AS118-2 sandblaster gun offers high flexibility and convenience of use. Perform gravity feed sandblasting or siphon feed sandblasting with no problems. It also provides fast setup and very easy to use. This is one compressed air tool that is worth your investment!
Gravity Feed and Siphon Feed Sand Blaster with Switch
Both functions of gravity feed and siphon feed are included in this single sandblaster gun. Change to your preference with switch configurations.
Supports Various Abrasives
This sandblaster gun supports different media like steel grit, glass beads, walnut shells, silicon carbide, aluminum oxide and more.
Durable and Heavy-Duty Sandblaster Gun
Lematec always provides quality air tools that are impact resistant. The Lematec AS118-2 Portable Sandblaster Kit is built from tough ABS material that performs even perfectly even when subjected to Different workshop environments.
Complete Portable Sandblaster Kit
The Lematec AS118-2 Portable Sandblaster Kit comes with a 10-ft hose and siphon tube for complete siphon sandblasting.
With Easy Switch Configurations
The Lematec AS118-2 Portable Sandblaster Kit can be used for both gravity and siphon feed sandblasting. Given these features, this media blaster is engineered to provide quality blasting and enables you to quickly change from gravity to siphon and vice versa. It also has a shut OFF switch configuration to make sure the sandblaster is set to OFF to avoid accidents.
The Perfect Surface Treatment and Preparation Air Tool
When you include Lematec AS118-2 Portable Sandblaster Kit to your compressed air tool collection, you will gain multiple benefits and will improve the quality of your workshop tasks. Use AS118 to remove rusts off metal components, remove paint, remove excessive and years of grease and grime and remove tough stains. It is a perfect home improvement tool and works wonders in art crafting, autocare and DIY projects.
Neiko 30042A Closed Cycle Four Nozzles Included Spot Shot Sandblaster Kit
Product description
Pro Pneumatic Closed Cycle Air Spot Shot Sand Blaster Compressor Tool Kit. Spot Sand Blasting Gun without Blasting Grit
- Effectively clean hard to reach corners and edges with the spot sand gun and without blasting grit
- Closed-cycle system recycles blasting abrasive for minimal waste and mess
- Perfect for small rust areas and small sand blasting operations
- Quality construction to provide great spot sanding jobs to remove paint or rust
- Set includes: surface spot nozzle, inside corner nozzle, outside corner nozzle and panel edge nozzle
User questions & answers
| Question: | I have this unit (no instructions) and the sand is not recycling. When I lift the nozzle off the surface after blasting, the sand falls out. Ideas |
| Answer: | I never had much success with this unit but it did recycle, albeit poorly, although once the sand is used its pretty ineffective. I think it is more useful in stopping the sand/garnet going everywhere rather than recycling. |
PS-2 Heavy Duty Sandblaster Sand Blasting Gun Kit with 4 Ceramic Nozzle Tips 5mm and 6 mm
Product description
model :PS-2
Rubber tube Length : 1m
Air consumption: 0.36 (m3 / min)
Weight : 1kg (with nozzle)
Ceramic Nozzle Feture :
Wear resistance , anti-erosion, durable high temperature resistant :1600 Degree Celsius
Body density 3.6-3.8g / cm3, solid texture
- Powerful tool for removing tar, rust, old paint and many other materials. Designed for fast efficien
- can also be used to clean the structural parts, mechanical parts and products and other items.
- package include a 5mm and 6 mm steel gun nozzle .
- Additional : 2 pieces 5 mm Ceramic Nozzle (use for Glass or marble engraving )
- 2 pieces 6 mm Ceramic Nozzle ( use for Metal derusting )
User questions & answers
| Question: | Will this work on Harbor Frieght blasting cabinet |
| Answer: | Yes, it will work in an HF cabinet. I originally had an HF cabinet and replaced it with this upgraded equipment. I have since taken it out as I have a much larger one. I was glad I upgraded and would recommend anyone to do the same. |
| Question: | What size fitting is on the end |
| Answer: | I can’t remember what size fitting but the attachment at the end doesn’t fit American compressor hoses. I had to heat up the grip to loosen the glue on the fitting. Then I was able to change it to the fitting that I needed |
| Question: | What is the OD measurement |
| Answer: | .610-.604 |
| Question: | Will this work on Harbor Frieght blasting cabinet |
| Answer: | No it not a good gun |
Performance Tool M549 Portable Abrasive Blaster Kit
Performance Tool
Product description
Remove rust, paint, graffiti, corrosion and scale. Heavy duty 50lb capacity hopper, aluminum blast gun and 15' material hose. Compatible with any abrasive: silica, sand, glass beads, and pecan shells. Operating pressure: 90psi. Minimum air requirement 3.5cfm at 50psi
- Remove rust, paint, graffiti, corrosion and scale
- Heavy duty 50lb capacity hopper, aluminum blast gun and 15' material hose
- Compatible with any abrasive: silica, sand, glass beads, and pecan shells
- Operating pressure: 90psi
- Minimum air requirement 3.5cfm at 50psi
User questions & answers
| Question: | What is the outside diameter of this tip. Trying to find one that is |
| Answer: | Your set screw might be too far in. |
| Question: | Does the container need to be above the gun, or does a venturi form that pulls the abrasive up the tube. i need to work at the top of a 15' ceiling |
| Answer: | When you decide on the air, forget hp, forget psi. You want to consider CFM in the very first place. To pull tiny particles up the hose you can survive with an 11 CFM compressor. That is basically a 60 gallon compressor. Below 60 gallons you won't sandblast anything. Now, if you go to an 80 gallons compressor, you get 15 CFM and that allows you to pull "medium" particles up the hose (like crushed glass or medium coal slag). Those particles will eat the surface nice and fast. Although the next variable is psi and the third is gun tip width, the first variable CFM is the one that either makes it work or not. As for psi, open your compressor to 90 or up to 120. As for gun nozzle, keep is small for small particles, and get it bigger like 1/4 inch for medium abrasive (abrasive is what you shoot at the surface and crushed glass or medium coal slag are the best - coal slag is also known as "black diamond"). |
| Question: | I am trying to switch out nozzles but I can't get the nozzle back into the gun. How do I do this |
| Answer: | Yes this can certainly be used to Etch glass. This will be done best with the following medias: Glass bead, Aluminum Oxide, or Silicon Carbide. |
| Question: | what size air compressor is required |
| Answer: | 15 to 20 cfm you need a 5 hp compressor the best would be two stage or larger. this thing sucks air big time , if you are not set up right , forget it. My 5hp single stage would only let me blast under two minutes , before running again. Eastwood makes it look like you can plug in and go , no so for most of us home shop guys. |
Sandblaster Tips,10pcs replacement Sandblasting Nozzle Ceramic Tip 11/64 3/16 15/64 9/64 Inner Diameter for Sandblaster Gun
Product description
Discription:
Ceramic Nozzle Tips
Sizes: 4mm(x2), 5mm(x3), 6mm(x3) and 7mm(x2)
Quantity: 10 PCS
Material: Ceramic
Bore diameter:4mm/5mm/6mm/7mm
Color:Pink
Quantity:10x
Package included:
2pcs x 4mm Sandblaster Nozzle tips
3pcs x 5mm Sandblaster Nozzle tips
3pcs x 6mm Sandblaster Nozzle tips
2pcs x 7mm Sandblaster Nozzle tips
Note:
1.Please allow 1-2mm error due to manual measurement
- 1. 10pcs Replacement Abrasive Blaster Ceramic Nozzle Tips,comes in 2pcs 11/64"(4.5mm), 3pcs 3/16"(5mm), 3pcs 15/64"(6mm) and 2pcs 9/32"(7mm)
- 2. Size - Bore diameter:11/64" 3/16" 15/64" 9/64" , Outside diameter:5/8", Length:1-3/8"
- 3. Instead of cast iron, alloy steel blast nozzle,saving steel, reduce the cost.
- 4. Using the performance is good, strong wear resistance, long life, high efficiency.
- 5. Mainly used in machinery, industrial machinery parts, such as metallurgical casting, casting surface deoxidization.
25 Gallon Bench Top Abrasive Blast Cabinet Sandblaster for Rust Grime Paint Removing/Various Media Compatible Pressure Benchtop Air Sand Blast Cabinet
Product description
Specifications:
1. Material: Cold-Rolled Sheet
2. Color: Red
3. Weight: 13.9kg / 30.64lbs
4. Air Compressor Delivery: 40-80PSI/5CFM
5. Overall Dimensions: (25 x 21 x 19)" / (63.5 x 53.34 x 48.26)cm (L x W x H)
6. Working Space Dimensions: (22 x 18 x 11)" / (55.88 x 45.72 x 27.94)cm (L x W x H)
7. Function: Red Finish Steel Cabinet have a Transparent Plastic Top Door, Helps Keep Abrasive Dry
8. For Use with: Glass Beads,Sillica Sand,Alum Oxide and more
9. Capacity: 25 Gallon
Package Includes:
1 x 25 Gallon Sandblast Cabinet
4 x Assorted Ceramic Nozzles
1 x Dust Collector Port
1 x Blasting Gun
- Use on work bench or take to a job site
- Use silicon sand, glass beads or aluminum oxide to clean or polish material
- Made of high quality steel material, sturdy and durable in use
- Ideal for any business, garage or house
- Portable all steel cabinet with plexiglass viewing lid
COLIBROX New 10 Gallon Portable Air Sandblaster Sand Blaster Kit High Pressure Tank
COLIBROX
Product description
Introductions: This portable sandblaster is ideal for professional shops as well as your home garage. The large capacity tank allows you to store up to 10 gallons of media abrasive material and is easily transported with two rubber wheels. Two handles make it easy to move it. Feature: 1. Large capacity, can hold 10 gallon abrasive material 2. Made of solid steel, durable and long lasting 3. Portable & durable comes with mask 4. Easy to operation 5. 10FT hose with 3/8" brass shut off valve 6. Heavy duty 6" wheels for easy transporting Specifications: 1. Material: Steel 2. Color: Red 3. Capacity: 10 Gallon 3. Size of rubber wheel: 6" 4. Hose Length: 10ft 5. Size of four nozzles: 9/64", 1/8", 7/64", and 3/32" 6. Diameter of brass valve: 3/8" 7. Working pressure: 65-125 PSI 8. Air consumption: 6-25cfm 9. Tank dimension: 12" diameter , 20" length 10. Overall dimension: 33-1/2" x 18-3/4" x 13" (H x L x W) Package Includes: 1 x 10 Gallon Sandblaster
User questions & answers
| Question: | I purchased this the other day and can’t get media to flow through consistently. Any thoughts on how to fix the issue |
| Answer: | Yes, it sure can.I bought this and it works very well. |
| Question: | Can you use corn medium |
| Answer: | About 13 inch pull-on water gun, up to 21 inch when you fill it with water |
| Question: | Is this an all in one unit? Do i need a compressor |
| Answer: | Maybe, I bought two sets because it is affordable, and the both sets are equipped with 4 squirt guns. |
| Question: | What is the maximum pot pressure? How many psi |
| Answer: | The rings and sticks are always stand up when they arrives at the bottom. Are easy to pick up and give a lot of fun |
SUNCOO Bench Top Abrasive Blast Cabinet with Dust Collection Reclaimer System for Rust Grime Paint Removing/Various Media Compatible Pressure Benchtop Sandblaster Cabinet
Product description
Feature:
The sandblaster is ideal for safely cleaning and restoring parts and assemblies and accepts a variety of blasting media
Portable enough to use on work bench or take to a job site
Built-in low voltage 15 VDC light provides visibility for intricate work
Compact design is perfect for those in search of space saving options
Safely blast away paint and rust without making a mess around your shop
This sandblaster is equipped with top access for easy entry and exit of your workpiece or cabinet cleaning
The two sealed glove ports allow access inside the enclosed cabinet for operating the blast gun and moving the parts being worked upon.
Come with a dust collector system that can help you clear the air blast more efficiently and effectively when you are operating.
The sandblaster is equipped with an industrial-duty blast gun with ceramic tip, siphon hose, built-in light, large viewing window, and sealed rubber gloves
Specifications:
Color: Red
Work With: Glass Beads, Silica Sand, Alum Oxide, and more
Material: Steel
Blast Cabinet Capacity: 25 Gallons
Dust Collection Capacity: 1-4/5 Gallon
Operate Air: 40-90PSI / 5-9.5 CFM
Air Compressor Required: Yes
Overall Dimension
Blast Cabinets: 34.5" x 22.4" x 54.4"
Dust Collection: 21.7'' x 9.3''
Package Content:
Sandblast Cabinet
Dust Collection System
Rubber Gloves
4 Ceramic Nozzles
Dust Collector Port
Hopper and Screen
Blasting Gun with Trigger
- ✔IDEAL SURFACE TREATMENT - SUNCOO Blast Cabinet Bench Top can perfectly handle the paint, rust, and oxidation of the surface of a workpiece, suitable for the high-density surface treatment requirements.While the Dust Collection System can capture dust and help assure a safe, clean work environment. Average Air Consumption: 9.5 CFM@90 PSI
- ✔4 EXTRA NOZZLE+LARGE GLOVES - Equipped with blasting gun kit, 4 pcs replaceable ceramic nozzle(4.5/5/6/7mm), and oversized rubber gloves for operating the blast gun.Removable mesh-design work surface tray and drain plug for easy cleaning
- ✔TOP ACCESS DOOR - This sandblaster is equipped with an 18.7*28.7inch top access door for easy entry and exit of your workpiece or cabinet cleaning. It also has a built-in exhaust for smaller blast cleaning jobs. Blast Abrasive Media: glass beads, silicon carbide, aluminum oxide, crushed walnut shell, etc.
- ✔OVERSIZED RUBBER GLASS+LED TUBE - Oversized viewing rubber glass with built-in LED tube for better visibility. Removable plastic film（4 pcs） to protect the glass from corrosion. Viewing Window: 25.4 Inch X 13.4 Inch
- ✔STURDY STEEL CONSTRUCTION - This sandblaster is made of sturdy steel with a powder-coated finish that can resist rust and corrosion. The support frame consists of 4 sturdy legs and 4 top & bottom reinforcing beams. Electrical Current Requirement (Lamp): 120 Volt, 60 Hz，Dimension(Blast Cabinet)：34.5*22.4*54.4 Inch,(Dust Collection)：21.7 x9.3 Inch
User questions & answers
| Question: | What does cabinet weigh |
| Answer: | could tell you , you can drag it , i welded casters to leg base to move around |
| Question: | Where do I get a replacement filter for the dust collector? And a replacement viewing window |
| Answer: | havent researched the filter rep. it comes with three tear offs my welding supply has rep. tear offs |
| Question: | What air compressor are you all using for this cabinet |
| Answer: | 60 gal. 6hp |
| Question: | Is there an option to mount the reclaimer on the side of the cabinet |
| Answer: | There is no option to move to the side. |
| Question: | What pressure and cfm are needed |
| Answer: | I used it to remove paint- A lot of nooks and crannies in this piece of furniture; |
Latest Reviews
View all
Rugby Equipment Bags
- Updated: 06.05.2023
- Read reviews
Hp Jumper Cables
- Updated: 09.01.2023
- Read reviews
Bbtac Magazines
- Updated: 30.01.2023
- Read reviews
Jump Rope For Weight Loss
- Updated: 04.07.2023
- Read reviews
Dupont Shower Sealants
- Updated: 13.07.2023
- Read reviews