12 best palm routers

Product description

1-1/4 HP motor delivers 6.5 Amps for improved performance. Heavy Duty aluminum motor for increased durability.

• Variable speed control dial (10,000 to 30,000 RPM) enables user to match the speed to the application
• Smooth rack and pinion fine depth adjustment system for more precise settings
• Slim and ergonomically designed body for increased comfort and control
• Quick release cam lock system for easy depth adjustments and base removal/installation
• Electronic speed control maintains constant speed under load
• Soft start feature for smooth start ups
• Fixed base accepts industry standard template guides for convenience

User questions & answers

Question:	can you set this up for a table router
Answer:	My short answer would be yes. I'm not sure whether there are commercially available tables for it, though. You may have to build one yourself.
Question:	What is the set of drill bits should I buy for this tool. I bought the MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks and are n
Answer:	This is a 1/4" collet router. If you want to use 3/8" (new to me) or 1/2" get a 1/2" router. I've used routers for 45 years. Own a 1/4" and two 1/2" Here's a quick guide: 1/4" router is the most widely useful, can be held in one hand for quick work, your arm doesn't get tired as fast as with a larger router. This one is good for hinge guides and door installs, laminate trimming (laminate trim bits with bearings), round over of the edges of boards or plywood. Makes a neat no slivers edge, get 1/2", 3/4" diameter cove bits (these will make 1/4 and 3/8" from the edge curves) I get these with bearings as well. (If you want less of a curve, use less depth, the curve is not symmetrical--no one will care. This is what I usually grab my 1/4" router for (I've got a Porter Cable 1/4" that's 40 years old. Can't figure out how to take it apart to replace the cord. Rather than a $60 trip to the tool repair I'm thinking of this one, vacuum dust collection is a plus). Shelf dados, usually 1/2 to 3/4" wide, is best done with a more powerful 1/2" router, but you can get by with this with two passes (overlapping) of a 1/2" straight bit. Plunge routing: always use dust collection. Freehand scroll work: 1/8 or 1/4" round bits- I don't do this, others do. If you don't yet have a router, or a specific shop need, get a 1/4". If you think you need one of those $400 router tables: don't. Make your own or buy a jointer. Figuring out how to make a router table will teach you about making jigs (you can make a fence that has finer adjustment than the fanciest most expensive one on the market) Direction of working. There's a correct direction to running a router along the edge of a board. With plywood, pine, fir, spruce, etc.. going the correct way can rip out long splinters. If you first make a very shallow pass in the 'wrong' direction to knock off the edge, then go normal depth in the correct direction, you can avoid this. (I still don't know if I want this router or not. There were 6 opened and reclosed boxes (returns?) at the Home Depot. Why?)
Question:	can it be used for wood doors and frames for hinges
Answer:	Yes, but it is a much better used as router than a door or frame hinge.
Question:	Can I trim my toe nails with it
Answer:	I definitely would use a flush trim bit. A round over or rabbiting bit might be too much. IMO

Product features

Performance & Precision

The Makita 1-1/4 HP Compact Router (model RT0701C) delivers performance and precision in a compact design. With a full 1-1/4 maximum horsepower, the RT0701C is engineered for a range of precision routing applications.

The RT0701C has a powerful 1-1/4 HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application. Additional performance features include electronic speed control to maintain constant speed under load, and soft start feature for smooth start-ups. The RT0701C is double-insulated with a heavy-duty aluminum motor housing for increased durability.

The RT0701C is engineered for precision and includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal/installation, with a high-visibility base design for improved handling and performance.

Additional features include a slim and ergonomic design that weighs only 3.9 lbs., with a durable flat top design for added convenience when changing bits. The base can be removed quickly to install other bases (sold separately), and the shaft lock is engineered for quick and easy bit changes. The RT0701C uses ¼” shank router bits.

Includes:

-1/4" Collet (763637-1).

-Straight Guide (122965-7).

-Spanner Wrench (781039-9).

-Spanner Wrench (781011-1.

1 Year - 30 Day Warranty

Every Makita product is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Certain products referenced below have longer warranties. Should any trouble develop during the one-year period, return the Complete product, freight prepaid by user, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge.

These warranties do not apply to Makita Accessories or where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers, normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The tool has been abused, misused, improperly maintained or operated. With regard to Pneumatic Nailers, improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting. With regard to Lithium-Ion Tools, improper operation includes the use of a non-genuine or 'knock-off' battery on a Lithium-Ion Tool or Charger. With regard to Laser Instruments, abuse includes liquid damage or physical damage caused by impact.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold under these warranties, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose' after the expiration of any express warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Bosch GKF125CE Colt variable-speed palm-grip router with 1.25 horsepower (max) lets you feel the power in your hand. This Bosch Colt Palm Router has an ergonomic palm-grip design with soft-grip to make it very comfortable to hold, making it typically more convenient to use than larger routers. But it also has ample power, with a 1.25 HP (max) rating. Far more than a laminate trimmer, it’s the ideal tool for rounding-over deck planks and railings, hinge mortising, decorative edge forming, slot cutting, window cutouts, decorative inlays, laminate trimming and more. The motor features soft-start circuitry, a variable-speed dial and Constant Response circuitry to maintain speed under load. Its PR101 fixed base features macro- and micro-fine depth adjustment and a centerable round subbase for easy guidance. The GKF125CEN Colt Palm Router package includes the router, self-releasing collet chuck and a comfortable forged collet chuck wrench.

• Ease of use: Revolutionary new woodworking depth adjustment system for easy and precise depth adjustment
• Power: Featuring a 1.25-Hp, 7.0 amp motor for compact versatility with speeds of 16,000-35,000 RPM
• Convenience: Wide-bit capacity - fixed base accepts bits up to 1-5/16-in wide
• Consistency: Constant response circuitry - monitors and maintains speed under load for consistent performance - provides overload protection and soft start for reduced start-up torque
• Comfort: Palm-grip design with soft grip and finger support pockets - provides exceptional comfort and control

User questions & answers

Question:	I need to replace my colt router in my shark cnc does this router have the same body size to fit
Answer:	No, the GKF125CE and the PR20EVS are not the same diameter. With the increase in power in the GKF125CE, the motor is bigger.
Question:	Collet size
Answer:	1/4" collet!
Question:	No edge guide? Is there one for this model
Answer:	Thank you for your question. You can use PR102 Straight edge guide for the GKF125CEN Colt Router. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Will the plunge base and other accessories that fit the previous Colt palm router, fit on this model
Answer:	The GKF125CEN has an ergonomic palm-grip design with soft-grip to make it very comfortable to hold, making it typically more convenient to use than larger routers. The depth adjustment system has also been redesigned, these new features prevent this router from working with the previous Colt (PR10/PR20) plunge base. We offer the PR111 plunge base which is compatible with the GKF125CEN.

• Powerful Motor & Variable Speed - 6.5-Amp motor with max horsepower of 1.25 delivers abundant power for a variety of routing and trimming applications; The variable speed control dial (10000-32000 RPM) allows users to choose a more appropriate speed for different materials.
• Precise Operation & Led Lights - Smooth rack-and-pinion depth adjustment system ensures precise operation for a range of cabinetry and woodworking applications; Dual bright LED lights illuminates dark working areas.
• Ergonomic Design & Convenience - Rubber covered handle for comfortable grip;The quick locking system for convenient depth adjustments and base change.
• Durable Housing & Clean Jobsite - The aluminum body and base for long term durability; Dust hood removes dust to leave a clean work space.
• Package Included - 1.25 HP compact router tool with 12.1Ft/3.7m cord, 5 router bits, edge guide, roller guide, dust hood, 3/8” and 1/4” collet, wrench and tool bag.

User questions & answers

Question:	Can this be used to make words on wood planks/signs
Answer:	Yes, you can use it to do that.
Question:	can it go up and down on depth without twisting the base
Answer:	Hi, To adjust the cutting depth, loosen the locking lever and move the tool base up or down as desired by turning the adjusting screw. After adjusting, tighten the locking lever firmly to secure the tool base.
Question:	is there a plunge adapter for this tool
Answer:	Yes, if you need one, please kindly contact Masterworks customer service. Also we will have plunge bases for sell on Amazon next month.
Question:	Can this router cut a sink hole in butcher block
Answer:	Yes, this router cut a sink hole in butcher block, but you have to apply with a router table

Product features

Accurate

Smooth rack-and-pinion fine depth adjustment system.

Comfort

Ergonomically designed body for increased comfort and control.

Led Work Light

Dual LED's ensure maximum visibility in operation.

Variable Speed Operation

Our powerful 6.5-amp motor provides anywhere from 10000-32000 RPM rotations per minute.

Quick Locking System

Enables simple coarse height adjustments and motor release.

Powerful Motor

6.5-Amp motor with max horsepower of 1.25 delivers abundant power.

Accepts 1/4 and 3/8-inch Collets

1/4 and 3/8-inch collets allow for compatibility with a wide variety of bits.

Durability

Heavy duty aluminum motor housing and base for increased durability and stability.

Avid Power 6.5-Amp 1.25 HP Fixed-Base Wood Router

Avid Power 6.5-Amp 1.25 HP wood router tool with fixed base, variable speed, dual LED working lights, edge guide, roller guide and dust hood, is perfect for a variety of routing and trimming applications.

Its smooth rack-and-pinion depth adjustment system provides precise depth adjustment.

Product description

The Bosch PR20EVS Colt electronic variable Speed palm router combines power, precision and versatility in a small sized tool. It has a 1.0 horsepower, 5.6 amp motor that spins at a variable Speed of 16,000 to 35,000 rpm. The variable Speed dial is conveniently mounted on top of the tool body. The router features constant response circuitry, which maintains a consistent Speed by detecting heavy loads and increasing power to maintain the selected rpm. It features soft start circuitry, which reduces startup torque. Additionally, the depth can be adjusted by simply aligning and lowering the motor and then locking the router in position with the clamping level. Micro fine adjustments are equally effortless, thanks to the wheel on the back of the router's base. It accepts standard 1/4 Inch bits for flexibility, with an impressive max cutter diameter of 1 5/16 Inch. The motor housing has a palm shaped, rubber over molded grip that allows for comfortable operation. The included rugged aluminum fixed base is durable, solid and precise. Includes: PR20EVS Palm Router, PR001 Fixed Base, 1/4 Inch Self Releasing Collet Chuck, Shaft Wrench, Collet Wrench.

• PR20EVS Colt Palm Router features a 1.0 HorsePower 5.6 amp variable speed motor with speeds from 16,000 to 35,000 rpm
• Convenient: Provides a straight edge guide to lead router along edges of work piece or up to 3-5/8 inch from edge; The wood router also features an angled cord exit to keep the cord out of the way when working
• Durable: The rugged aluminum fixed base of the wood router is durable, solid and precise; The PR20EVS features unique finger support pockets for additional stability, especially when trimming edges
• Precision: The fast and precise depth adjustment system allows both macro and micro adjustment while the quick clamp system allows motor to be easily adjusted or moved from base to base
• Versatile: The PR20EVS provides enhanced bit capacity with a fixed base that accepts bits up to 1 5/16 inch in diameter; Versatile bit changing system allows for fast, easy bit changes using two wrenches or spindle lock and one wrench

User questions & answers

Question:	where is it made
Answer:	The best that I can answer is that it was assembled in Mexico according to the labeling on the router. No indication as to where te components were made.
Question:	you can have with bulb voltage
Answer:	Always check the data plate for the correct operating voltage required to run the tool. Never run a tool that is placarded as 115 VAC on a 200 to 220 VAC source. Vice a Versa, a tool that is placarded for 220 VAC will not work on a 115 VAC source. So, any "bulbs" would have to match the input voltage. Check with a hardware store or tool repair location.
Question:	what size bit fits this router
Answer:	1/4" shank. Maximum bit diameter 0f 1 3/8". With a maximum bit diameter of 1 3/8" don't attempt to make heavy cuts as that could tend to over load the motor. Take light cuts and increase depth or horizontal cuts incrementally as long as they don't affect router speed or loading.
Question:	Does anyone have a correction for bits working out of the collet, towards the work, when cutting with the side of a straight bit
Answer:	I wonder if you had bottomed out the bit in tne collet. Insert the bit, then pull it back out by a small distance and tighten the collet. Bits bottomed out have a habit of coming loose.

Product features

Description

The Bosch PR20EVS Colt variable-speed palm-grip router puts routing power and precision in the palm of your hand. The PR20EVS has an ergonomic palm-grip design with softgrip to make it very comfortable to hold, yet it also has ample power, making it typically easier to use than larger routers. It's more than a just a laminate trimmer, as it is the ideal tool for putting roundovers on deck railings, mortising for hinges, slot cutting, and much more. The motor features soft-start, a variable-speed control, and Constant Response circuitry to maintain speed under load. The PR001 fixed base features macro- and micro-fine depth adjustment. The PR20EVSK also includes a self-releasing 1/4 In. collet chuck, comfortable forged bit-changing wrenches, edge guide.

• 【Powerful Motor】6.5-Amp motor with max horsepower of 1.25 delivers abundant power for a variety of routing and trimming applications; The speed (30000 RPM) will provide enough power to finish the project.
• 【Easy to Operate】The compact router kit can applicate under normal ambient conditions, equipped with the right rotary. Transparent cover to control the flying sawdust. And it will allow you to clearly observe the processing conditions. The transparent base is designed to recognize accuracy easily in processing.
• 【Rich Accessories】Include several accessories, such as wrenches, chucks, template guide adapter, sub-base plate, and more. The Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine. Straight guide, thicker models are stable and not deformed, straight processing is stable. You can tighten the router bits with the wrenches.
• 【Wide Application】This wood compact router is widely used in wood processing, cabinet processing, handicraft production, wood veneer, and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities, DIY.
• 【What You Will Get】15 pieces 1/4" shank router bits set(Bonus Gift!), 1x 110V compact router, 10 x sandpapers, 1 x 1/4" to 1/2 " router collet, 1 x straight guide, 1 x guide plate, 1 x trimming guide, 2 x wrenches, 6 x carbon brush, 1 x bolt, 1x screw, 1 x manual, and our easy-reach customer service.

User questions & answers

Question:	What kind of router bits does this router come with
Answer:	Yes.
Question:	Does this wood router make a circle compass
Answer:	This drill has burned out on me multiple times, and twice I have contacted the seller and they sent me a new drill without having to send the broken one back. I am happy with the service, I put a decent amount of wear onto this drill, I have one that I have beat the crap out of and it still works, kind of 50/50 whether you will get a good one or not, but I think there's a 3 year warranty?
Question:	How can a neophite like me make the base plate wider
Answer:	Yes
Question:	Does the 15pcs router bits set comes with the wood router
Answer:	The DCD778L will have a mode selection collar that can be used to select the correct operating mode depending upon the planned application. The modes are: drilling, screwdriving, and hammerdrilling.

Product features

Pefect for Wood trimming, Metal grooving, Metal carving.

• Stainless steel gear transmission
• Blade to grip more tightly
• Convenient to change the blade bit
• Non-slip rubber handle Comfort grip
• Fixed bottom knob
• Improved Aluminiumm Machine Enclosure
• Powerful motor can work continuously
• Durable and Long-lasting
• Water-Proof and Rust-Proof
• Lengthen international power cord- convenient for wide range working space

Clear view, easier operation

What You Will Get：

• 1 x compact router
• 1 x 1/4" to 1/2"router router collet
• 1 x Straight Guide
• 1 x Guide plate
• 1 x Trimming Guide
• 2 x Wrenches, 6 x Carbon brush
• 1 x Bolt , 1 x Screw
• 15PCS 1/4" Shank Woodworking Router Bits Set
• 1 x manual,10 x sandpapers

Warm Tips:

• To avoid from getting an electric shock, please make sure to pay attention to the safety notes on the manual book received. Read carefully before operatig the machine.
• Take care of the blade bit as it may hurt you if hold improperly.
• Before installing or takin off the blade bit , please make sure to pull the plug out !
• Make sure to tighten the blade tight enough so it won't loosen during working!

Extra tips:

• Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
• Please understand that colors may exist chromatic aberration as the different placement of pictures.

Quick Change

1/4" to 1/2 "router router collet for quick change.

Deburring

10 pieces of sandpapers for deburring.

Removing Bearings

Allen wrench for removing bearings.

Two ways to work: W/ Trimming Guide

Roller running along the curve to ensure exact cutting

How to replace the carbon brush

• Step 1: Open the cap on the side
• Step 2: Pull out the carbon brush
• Step 3: Replace a new carbon brush into and screw the cap on
• In order to better protect the motor, we recommend you to replace a pair of carbon brushes after using for 50-60 hours.

Two ways to work: W/ Trimming Guide

To ensure stable straight processing on thicker models.

Product description

Voltage: 110V (US Plug)



Input Power: 800W



No Load Speed: 30000rpm



Frequency: 50 / 60Hz



Collet Diameter: 6.35mm(1/4")



Power Cord Length: about 4.4 ft



Machine weight: 3 lbs



Package weight: 5 lbs



Package includes

1x 110V Palm Router

1 x Router Bit

1 x Straight Guide

1 x Guide plate

1 x Trimming Guide

2 x Wrenches

1 x Bolt

1 x Screw

1 x Manual



15PCS 1/4" Shank Router Bits Set:

R6.35mm Cove Box Bit

R6.35mm Bearing Cove Box Bit

6mm Panel Pilot Bit

12.7mm Dovetail Bit

12.7mm Bearing Flute Trim Bit

R3.17mm Cove Box Bit

12.7mm 45° Chamfer bit

12.7mm 45° Grooving bit

R9.5mm Rounding Over Bit

12.7mm 90° V Grooving bit

R4mm Roman Ogee Bit

5mm/6mm/12mm/16mm Straight bits



features

Transparent base design makes the operation process visible and it is easy to control.



Comfort handle ergonomic design.you can operate it easily.



Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine.



Machine comes with a 15pcs bits which can meet almost all daily needs of woodworking.If you are a beginner who are looking for a palm router set for practicing, it would be your perfect and smart choice.



Widely used in wood processing, handicraft producing, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY.

• Powerful motor 800W power for a variety of routing and trimming applications.Transparent base design makes the operation process visible and it is easy to control.
• Edge guide and roller guide makes the straight trimming easier and faster.Smooth rack-and-pinion depth adjustment system ensures precise operation for a range of cabinetry and woodworking applications.
• Ergonomic handle grip.Rubber covered handle for comfortable grip and anti-fatigue long term operation.The durable aluminum body chassis and base is waterproof and dust proof with better heat resistance performance.Exquisite steel chuck for stable and fast bits changing.Spiral vent on the top for high efficiency heat diffusion ensures the machine has a longer running time.
• Universal carbon brush is easy to replace.The knife scale can be adjusted precisely by lifting the knob refer to the scale printed on the machine so that the cutting is exact,curve processing is fine.Widely used in wood trimming, grooving and drilling.
• Package includes 800W compact router tool with 5ft cord, 15 router bits, edge guide, roller guide, guide plate,wrenches, bolt, screw, replacement carbon brushes, manual.

Product description

The 20V max XR Cordless compact router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base Change.

• Dual LED lights help illuminate the work surface
• Depth adjustment ring allows for fast and easy height adjustments
• Electronic brake slows the motor down faster after the unit is shut off; Speed 16,000 to 25,500 rpm
• Variable speed dial allows the user to match speed of the router to the application
• Soft start motor with full time electronic feedback allows the motor to maintain speed during cuts

User questions & answers

Question:	What's the equivalent HP? 1.25 or greater
Answer:	1.25HP
Question:	which batteries work with this tool? are they compatible with any stanley / porter cable / black+decker batteries
Answer:	The DCW600B is compatible with the DEWALT 20V battery line. It is not compatible with any other Brand.
Question:	Can you use a flexvolt battery with this
Answer:	Yes. I tried it and works fine with flex volt batteries.
Question:	Can it use 1/4 in bits
Answer:	Yes, we recommend using only 1/4" bits with the DCW600B.

• 【Premium Quality】- The wood trimmer is made with high quality Aluminum + Plastic which is durable to use and have long service life.
• 【Easy to Operate】- Trimmer applicable under normal ambient conditions, equipped with the right rotary. Transparent cover to control the flying sawdust. Can clearly observe the processing conditions. Transparent base design is great for accuracy easily recognizable in processing. The scale is clearly visible, easy to operate.
• 【A Set of Accessories Included】- It includes several accessories, such as wrenches, chucks, template guide adapter, sub-base plate and more. The Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine. Straight guide, thicker models are stable and not deformed, straight processing is stable. With the wrenches you can tighten the router bits.
• 【Widely Used】-This electric trimmer is widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY. Easy to wood trimming, grooving.
• 【What's in the Box！】- 12PCS 1/4" Shank Woodworking Router Bits Set(Bonus Gift!) 【Including 6mm/12mm/16mm Straight bits,12.7mm 90°"V" Grooving bit,12.7mm Dovetail bit,32mm 45°Chamfer bit, 12.7mm Dovetail bit, 32mm 45°Chamfer bit, 12.7mm Flush trim bit,R6.3mm/R9.5mm Round over bit, R6.3mm Core box bit,R6.3mm Core bit,R4mm Roman ogee bit.】 1x 110V Palm Router, 1 x Router Bit, 1 x Straight Guide, 1 x Guide plate, 1 x Trimming Guide, 2 x Wrenches, 6 x Carbon brush, 1 x Bolt, 1x Screw, 1 x Manual.

User questions & answers

Question:	Does this router make a circle compass
Answer:	It was a gift. I don’t know. I will say they like using it
Question:	I didn’t receive the instruction manual with the trimmer. Is there a pdf file available
Answer:	I didn't get one either its not hard to figure out juts play ×ith scrap wood first and you will see how easy it is to use i use mine all the time eith different bits and hadn't had any problems
Question:	How far can it go in terms of length
Answer:	Have used mine for about 6.5 hours for 5 days to cut a 1" 45* angle on 2 x 4's at least 1,600 running feet - still going strong.
Question:	It shows bits in picture does it come with these
Answer:	Hello, YES my router came with 1 bit albeit not a high end one but it works! I recommend Bosch bits, I have always had very good results with them over the years.

Product features

CtopoGo 800W Electric Hand Trimmer Wood Laminator Palm Router

• With this electric trimmer, make it smooth in the woodworking.
• Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine.
• Lift knob, the scale can be adjusted.
• The scale is clearly visible, easy to operate.

Pefect for Wood trimming, Metal grooving, Metal carving.

• Stainless steel gear transmission
• Blade to grip more tightly
• Convenient to change the blade bit
• Non-slip rubber handle Comfort grip
• Fixed bottom knob
• Improved Aluminiumm Machine Enclosure
• Powerful motor can work continuously
• Durable and Long-lasting
• Water-Proof and Rust-Proof
• Lengthen international power cord- convenient for wide range working space

Two ways to work: W/ Trimming Guide

Roller running along the curve to ensure exact cutting

How to replace the carbon brush

• Step 1: Open the cap on the side
• Step 2: Pull out the carbon brush
• Step 3: Replace a new carbon brush into and screw the cap on
• In order to better protect the motor, we recommend you to replace a pair of carbon brushes after using for 50-60 hours.

Two ways to work: W/ Straight Guide

To ensure stable straight processing on thicker models.

Clear view, easier operation.The scale is clearly visible, easy to operate.

What's in the box:

• 1 x Electric Trimmer Wood Tool
• 1 x Router Bit
• 1 x Straight Guide
• 1 x Guide plate
• 1 x Trimming Guide
• 2 x Wrenches, 6 x Carbon brush
• 1 x Bolt , 1 x Screw
• 12PCS 1/4" Shank Woodworking Router Bits Set
• 1 x Instruction

Warm Note:

• To avoid from getting an electric shock, please make sure to pay attention to the safety notes on the manual book received. Read carefully before operatig the machine.
• Take care of the blade bit as it may hurt you if hold improperly.
• Before installing or takin off the blade bit , please make sure to pull the plug out !
• Make sure to tighten the blade tight enough so it won't loosen during working!

• Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
• Please understand that colors may exist chromatic aberration as the different placement of pictures.

Product description

The Bosch GKF125CEPK Colt 1.25 HP (max) variable-speed palm router combination kit pairs a tool that lets you feel the power in your hand with a fixed base and a plunge base. The GKF125CE has an ergonomic palm-grip design with soft-grip. It has ample power, with a 1.25 HP (max) rating. Far more than a laminate Trimmer, it is the ideal tool for rounding-over railings, hinge Mortising, decorative edge forming and more, As well as laminate trimming. The motor features soft-start circuitry, a variable-speed dial and constant response circuitry. Its fixed base features macro- and micro-fine depth adjustment and a centerable round subbase. The plunge base features a precision centering design to keep the bit on the cut line, as well as a Spring-Lock plunge lever depth rod with fine adjustment. The quick-clamp system allow user to move the motor to move from base to base. The kit includes Straight-Edge guide and a carrying case.

• Robust variable-speed palm Router construction – Made to provide precision and power with a 1.25 horsepower (max.) Motor, advanced electronics, high-performance bases & Proven ergonomics
• Powerful 1.25 HP (max), 7.0 amp motor – delivers abundant power for routing and trimming applications
• Ground-breaking fixed-base depth-adjustment system – ensures precise depth adjustment
• Rugged fixed base 360° (non-split) aluminum base housing with wide-bit capacity — Accepts bits up to 1-5/16 in. Wide
• Smooth-action plunge base – provides a spring-lock plunge control lever for easy plunge action

User questions & answers

Question:	Can it be mounted to a table
Answer:	No, the GKF125CEPK includes a colt router, which is tool small to be mounted on a router table. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Can this case be purchased separately? Been unable to find one
Answer:	Better to find in the ebay, I think some will not want this case and want to sell.
Question:	Comes with the P102 straight edge guide, but I have not seen the adaptor or mounting hardward to attach it to the router in my box
Answer:	I found mine in the lid of the box. It had slipped in the holes in the lid.
Question:	Does it accept template guide adapter
Answer:	The GKF125CEPK needs PR110 Subbase for a threaded Template Guide. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Accurate and Sharp

The Bosch GKF125CEPK Colt 1.25 HP (Max) Variable-Speed Palm Router Combination Kit can seamlessly be applied in various applications, displaying top performance. With utmost accuracy, you will be able to experience this precision-machined and adjustable router that allows a variable speed range.

Helps Guide Accurate and Clean Work

The Bosch GKF125CEPK Colt 1.25 HP (Max) Variable-Speed Palm Router Combination Kit features an ergonomic palm-grip design with soft-grip. The motor features soft-start circuitry, a variable-speed dial and constant response circuitry. The kit includes a Straight-Edge guide and a carrying case, making it super convenient to carry along.

Product description

The Bosch GKF125CE Colt variable-speed palm-grip router with 1.25 horsepower (max) lets you feel the power in your hand. The GKF125CE has an ergonomic palm-grip design with soft-grip to make it very comfortable to hold, making it typically more convenient to use than larger routers. But it also has ample power, with a 1.25 HP (max) rating. It's far more than a laminate trimmer, as it is the ideal tool for rounding-over deck planks and railings, hinge mortising, decorative edge forming, slot cutting, window cutouts, decorative inlays, laminate trimming and more. The motor features soft-start circuitry, a variable-speed dial and Constant Response circuitry to maintain speed under load. Its PR101 fixed base features macro- and micro-fine depth adjustment and a centerable round subbase for easy guidance. The GKF125CEK Colt Palm Router Kit includes straight-edge guide is included that can guide the bit up to 3-5/8 In. in from the edge of workpiece, plus a carrying case.

• Powerful 1.25-HP Max motor – with the compact versatility of 16,000-35,000 RPM provides a durable, solid and precise palm router
• Ground-breaking depth-adjustment system – ensures precise depth adjustment
• Rugged 360° (non-split) aluminum base housing with wide-bit capacity — accepts bits up to 1-5/16 In. wide
• LED lighting – provides enhanced view of bit area
• Variable speed dial from 16,000 to 35,000 RPM – allows for accurately matching speed to workpiece and task

User questions & answers

Question:	does this fit a 1/4 inch router bit
Answer:	Dear Customer. The batteries we deliver with this brushless drill are 2.0Ah large capacity Lithium-Ion batteries are powerful enough to keep the power drill constantly running. if you need to use the drill If you need to work for a long time, our package will include two batteries to meet your working needs.

• 【Specification】voltage: 100V, frequency: 50 / 60Hz, power consumption: 650W, weight: 1.35Kg, rotation number: 2800rpm, no-load rotation number: 3000rpm, trolley chuck diameter: 6.35mm, special purpose
• 【design】 high efficient and practical electric pruning instrument, all copper motor can keep high temperature and reduce heat generated by prolonging service time. Using a transparent and adjustable base, the truck can be directly observed and cut off to achieve the correctness and convenience of operation.
• 【beginner's power tool】 the 3000rpm copper motor with no load speed can provide maximum power to meet the most severe woodworking applications. It has high-quality plastic, power switch and high-quality rubber handle with anti-skid pad. Get out of DIY like a beginner.
• 【purpose】 it can be widely used for chamfering, grooving, trimming, drilling, carving characters, arranging processing, etc.
• 【What's in the Box！】- 12PCS 1/4" Shank Woodworking Router Bits Set(Bonus Gift!) 【Including 6mm/12mm/16mm Straight bits,12.7mm 90°"V" Grooving bit,12.7mm Dovetail bit,32mm 45°Chamfer bit, 12.7mm Dovetail bit, 32mm 45°Chamfer bit, 12.7mm Flush trim bit,R6.3mm/R9.5mm Round over bit, R6.3mm Core box bit,R6.3mm Core bit,R4mm Roman ogee bit.】 1x 110V Palm Router, 1 x Router Bit, 1 x Straight Guide, 1 x Guide plate, 1 x Trimming Guide, 2 x Wrenches, 6 x Carbon brush, 1 x Bolt, 1x Screw, 1 x Manual.

Product description

The M18 Fuel Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router leverages our Powerstate Brushless Motor and Redlink Plus electronics. This delivers the power of corded 1.25 horsepower trim routers and best-in-class 31,000 RPM providing you with power and speed for clean, quality cuts in hard materials.

Compact and Portable

With the M18 Redlithium XC5.0 battery, the cordless compact router cuts up to 250 feet of 3/8-inch roundovers in red-oak, providing you with all-day run time with fewer trips to the charger.

Versatile

The handheld router is equipped with a micro-adjust dial and macro-adjust button, providing you with fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives you control in all applications.

Features

The compact router also features a sturdy 4-inch sub-base plate providing you with stability, and dual-LED lights illuminate your work surface. The M18 FUEL Compact Router is compatible with a plunge base and an offset base (sold separately).

• POWERSTATE BRUSHLESS MOTOR: Power of corded compact routers and higher SPM to complete cuts in hardwoods
• PERFORMANCE: Redlink Plus intelligence ensures maximum performance and protects from overloads, heating and over-discharge. Variable speed dial ranges between 10,000 and 31,000 rpm, providing precise control for clean edges and details
• ADJUSTMENTS: Macro Adjust button allows for fast macro-adjustments and 1.5-inch of adjustable range. Fine adjustment screw allows for precise adjustments beyond 1/64-inch increments
• COMPATIBILITY: Compatible with Milwaukee Plunge base and Offset base attachments (sold separately)
• MILWAUKEE AUTHORIZED DEALER: Includes USA Manufacturer Warranty

User questions & answers

Question:	se debe comprar por separado las baterias y el cargador de baterias
Answer:	Si no incluye cargador ni batería pero es una buena herramienta se lo recomiendo 👌
Question:	Will the router base work with guide bushings
Answer:	It comes with a second, larger base and that one will accept a guide bushing.
Question:	is it possible to use bits with a shank of a larger diameter? Need to use 8mm shank
Answer:	No it is only a 1/4" shank router.
Question:	where is it made
Answer:	China