10 best wet polishers

• ➤ 5" FULLY ASSEMBLED WET POLISHER WITH 6 MONTHS WARRANTY - Stadea® 5” Wet Stone Polisher with powerful DTM+ motor gear system features enhanced power and optimal polishing speed; Designed for stone concrete wet polishing; Variable dial control to match speed of either stone polishing process. Ready to use fully assembled unit, No need of assembling parts prior to use, 6 Months Warranty on manufacturing defects or malfuction for peace of mind. Contact Stadea Tools for warranty claim
• ➤ ERGONOMIC DESIGN FOR LONGER NON-TIRING USAGE - Ergonomic grip-size, out of core, soft back handle transfers minimal polisher weight to back handle minimizing back hand fatigue; Innovative head heavy polisher design transfers machine weight on the stone concrete polishing surface to increase polishing pressure and naturally enhanced polishing performance, and minimizes back hand fatigue; Out of body back handle eliminates air vent hand blockage increasing motor performance and durability
• ➤ CONNECTS TO GARDEN HOSE & UNDER-POLISHER WATER FLOW LINE - In-built water quick-connect to standard water hose, Water pressure control, Water Stopper, Extra-long water line, under-polisher water flow line does not interfere with polisher handling during usage, three-hole 120 degree water hole for even water distribution
• ➤ EASE OF USE - Arbor lock for easy release of tool accessories, Soft-start, Polisher power start one-push lock switch for easy continuous use, splash guard with vacuum connector to easier water and dust control, Dual handle support to easily meet specific use cases, Top D-handle must for stone polishing, ambidextrous side handle for easy multi-purpose use, ergonomic easy back handle
• ➤ ENHANCED SAFETY - Class-A GFCI for enhanced electrical safety to safeguard hazardous electrical shock, Double-insulation motor, Extra-long 12 feet industrial grade electrical cable

User questions & answers

Question:	What is the warranty
Answer:	Why not? It is basically a grinder with water. Might burn out over time if too much torque is used. A polisher does not use that much torque. Pay attention to the smell of the motor and slow down if you smell a burning. A 4inch Makita is only 59 bucks and has the high speed that is designed for cutting and abuse. Better choice and faster production. Time is money. Good luck
Question:	Does this work for marble countertops in kitchen and bathroom
Answer:	Lock nut is not included.
Question:	you mentioned var-6 speeds, not indicate its low- high speeds. they are? * above performance descp shows 3000--- is that high speed? or what
Answer:	I've used it without water and it's not good, it doesn't take much water too polish, now if you use a regular orbital sander, you can do most of your shaping, start with 100 grit and work your way up at the end use the polisher and finish up.
Question:	Stone Mason here, can you use these to cut venerr stone as a grinder/cutting tool instead of a flat polish tool
Answer:	You want to stick to 3000-5000 rpms for all of the pads. The finer the grit the lower the speed is my recommendation.

Product features

Variable Speed

Allow Change in Speed While Polisher is in Use -

Placed on top of polisher and right in front of the hand grip, the variable speed dial allows an operator to change speed with a thumb while polisher is in use.



One finger-touch operation -

Easy to change polisher speed



Match Stone Polish Speed - 

Variable speed control matches the specific polishing speed suitable to various stones surfaces

3 Hole Under WaterLine

Non-Interfering UnderWater Line -

The water line is placed at the bottom on the polisher, it allows clean top surface without any water line for non-interfering faster polishing.



Even Water Distribution -

Three-hole water head each at 120 degrees for even and adequate water distribution. It ensures continuous wet surface at high or low RPM. 



Zero Dry Spots -

Water distribution control and 3 hole water flow optimal water flow for zero dry spots during wet polishing.

Water Control-Connect

Quick-Connect to Standard Water Hose -

Built-in water quick-connect adapter to connect to a standard water hose.

Long water line for reaching long countertops.



Stop or Adjust Water Flow While Polisher in Use -

In-built quick-access water control to

• Adjust water flow
• Stop water flow

to match exact water flow needed, and eliminates guess work. Located close to hand grip for Quick access and One hand operation

GFCI & Long Cable

Cuts Off Electricity - GFCI - 



Built-in GFCI security against electrical shock while Wet polishing process. The polisher cuts off electricity in case of electrical shock.



Extra Long Electrical Cable - 

Industrial grade 12 feet extra long electrical cable line for

• Easy access to long counters
• Easy maneuvering

Ergonomic Handles

Comfortable Handles for Longer Operation -

All three handles (Back, Top D, Side Handles) are ergonomically designed for longer comfortable operations. 



Easy to Apply Pressure with Top D-Handle - 

Placed right above the heavy head, the top D handle provided adequate pressure on the surface easily for the best polishing result. 



General Purpose Ambidextrous Side-Handle -

Can be used for left handed or right handed operations. It is very useful for general purpose grinding polishing. 









 

Head Heavy & Balanced

Less Tiring Longer Operation -

Head Heavy Design transfers the maximum polisher weight on the polishing surface and minimum weight on back handle. It causes minimal pressure on the backhand,  and make the polishing process less tiring. It makes longer operations easier and possible.



The ergonomic back-handle works as a guide and comfortable to grip and operate



Balanced - A well-balanced machine for better control





 

DTM+ Power, Soft Start

Optimal Power For Wet Polishing -

Powerful 800W motor to drive the optimal power. Stone Concrete polishing needs constant speed on varying load, DTM+ Gear System is designed to maintain contact speed giving the best polishing performance.



Jerk-Free Start -

Soft start of the motor for better control and easy jerk-free start. Ensures work accuracy and perfection

One Push Lock Switch

One Finger Touch On-Off Switch - 

Placed below the back-hand grip of the polisher, the on-off power switch allows an operator to on and off with a finger.



Continuous Operation Without Holding Power Switch -

The power lock button locks the machine for continuous run, allows the operator to keep the machined powered on without continual pressing on the button. Placed below the back-hand grip, it has quick access while polishing is in use.

Flexible Splash Guard

Polishes Corners and Uneven Areas - 

Flexible splash guard can flex to reach corners and provides maximum reach for polishing. It can flush on uneven surface to provide maximum water protection. 



Matches Tools Height for Maximum Water Protection -

High-quality rubber flexes to match the reducing height of tools as it grinds down. It creates a flushed cover to provide maximum water protection and coverage.  

Arbor Lock

Faster Release of Accessories -

The arbor lock on top of polisher arbor locks the arbor for faster release of tool accessories - backing pad, profile wheels etc.



Optional Wrench Included -

The optional wrench also comes with the tool, the accessories can also be opened with the wrench. Refer to the section, What is the box for the complete list of items in the package.

Double Insulation

Double Insulation for Electrical Safety -

The double insulated polisher provided the electrical safety. Along with GFCI, Splash guard it provides multi-layered electrical hazard safety for the operator.

What is in the box

What is in the Box -

1. Wet Polisher
2. Water Shroud
3. Top Handle
4. Water Hose Adapter
5. Gear Box Cover
6. Side Handle
7. Carbon Brushes 
8. Water Bush
9. Wrench
10. Manual

Product description

Makita’s 4” Electronic Wet Stone Polisher is a favorite for professional stone work. The PW5001C combines 7. 9 AMP power and variable speed control with optimum speed settings, soft start for smooth start-ups, and more. The result is a fast and powerful stone polisher with precision engineering for professional stone finish work.

Makita's 4-Inch Electronic Wet Stone Polisher is a favorite for professional stone work. The PW5001C combines 7.9 AMP power and variable speed control with optimum speed settings, soft start for smooth start-ups, and more. The result is a fast and powerful stone polisher with precision engineering for professional stone finish work.

7.9 AMP Power with Variable Speed Control

The PW5001C is powered by a 7.9 AMP motor with variable speed dial that provides optimum speed settings from 2,000-4,000 RPM. The electronic speed control maintains constant speed under load, and the soft start feature ensures smooth start-ups. It also includes a Ground Fault Circuit Interrupter (GFCI) plug, and an overload switch to protect from armature failure.

Comfort and Ergonomics

The PW5001C weighs just 4.6 pounds and is built with ease-of-use features for extended operation. The durable housing cover protects the industrial die cast aluminum gear housing. The common fitting accepts the most popular water hose connections, and the three holes at the spindle top evenly spread water to the pad and prevent the pad from clogging. A side handle is included.

Versatile Design for a Range of Applications

Makita's PW5001C is precision engineered for professional stone polishing applications. The PW5001C is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's Hook and Loop Accessories and Attachments

Makita's 4-Inch Electronic Wet Stone Polisher is a favorite for professional stone work. The PW5001C combines 7.9 AMP power and variable speed control with optimum speed settings, soft start for smooth start-ups, and more. The result is a fast and powerful stone polisher with precision engineering for professional stone finish work.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita PW5001C 4-Inch Electronic Wet Stone Polisher, rubber pad, side handle, head cover, wrenches, front grip and dust cover.

From the Manufacturer

The new Makita Wet Stone Polisher is precision engineered for a professional finish every time it makes contact with granite, marble, limestone and more. This polisher can tackle the most demanding polishing, sanding, shaping and light grinding jobs and is equipped with Soft Start Technology, Electronic speed Control and a Variable speed Dial range of 2,000 - 4,000 RPM. The PW5001C has without a doubt the performance, innovation and technology demanded by professionals. Don't settle for less when you can get it all with the Makita PW5001C Wet Stone Polisher.

• Powerful 7.9 AMP motor with less weight (5.1 lbs.)
• Variable speed control dial enables user to match the speed to the application
• Soft start feature for smooth start-ups
• Electronic speed control maintains constant speed under load
• Common fitting accepts the most popular water hose connections
• High power-to-weight ratio for reduced operator fatigue
• Housing cover protects the industrial die cast aluminum gear housing

User questions & answers

Question:	Can i use this to polish the finish on my swimming pool
Answer:	Not happy with the water design, as others stated. the quick connect fitting is not something you can find at local stores (Home depot, Lowes, Ferguson & Others) I spent a few days trying to find the correct fitting, no luck... What i did find is that it is a British 1/8th Thread "BSP 1/8th" Found an Adapter on amazon that will adapt to a 1/4" NSP... Not happy with the time i have spent searching for the right piece.... Good Luck!
Question:	Can i used to polish Corian countertop
Answer:	Yes it does work there is a small opening on side of band
Question:	Can you put a 5" backer pad and discs on this wet polisher? Are the threads
Answer:	No
Question:	I couldnt find the hose connector for this tool, can you search and give me alink? its kind of inconvinient that Makita doesnt include the connector
Answer:	Yes as the sense and versa 3 share the same case/body. Versa 3 and Sense both have 1.58-inch 336x336 OLED displays

Product features

Makita PW5001C 4" Electronic Stone Polisher

Makita’s 4” Electronic Wet Stone Polisher is a favorite for professional stone work. The PW5001C combines 7.9 AMP power and variable speed control with optimum speed settings, soft start for smooth start-ups, and more. The result is a fast and powerful stone polisher with precision engineering for professional stone finish work.

7.9 AMP Power with Variable Speed Control

The PW5001C is powered by a 7.9 AMP motor with variable speed dial that provides optimum speed settings from 2,000-4,000 RPM. The electronic speed control maintains constant speed under load, and the soft start feature ensures smooth start-ups. It also includes a Ground Fault Circuit Interrupter (GFCI) plug, and an overload switch to protect from armature failure.

Comfort and Ergonomics

The PW5001C weighs just 5.1 lbs. and is built with ease-of-use features for extended operation. The durable housing cover protects the industrial die cast aluminum gear housing. The common fitting accepts the most popular water hose connections, and the three holes at the spindle top evenly spread water to the pad and prevent the pad from clogging. A side handle is included.

Product description

QuickT SWP701K, 5 Inch Powerful 800 W Stone Concrete Wet Polisher Kit designed for Wet Polishing - Concrete Countertop, Stone Countertop, Floor Surface and Floor Edge and other surfaces Wet Polishing Counter Edge Shaping Profiling - Connects to Profiles Wheels to create various type of bullnose - Demi, Ogee, Full Bullnose, Bevel and many more Surface Grinding - Connects to Cup Grinding Wheel, Drum Wheels for Concrete Countertop, Stone Countertop, Sink Edges, Floor Surface and Floor Edges Grinding Faucet Hole Coring - Connects to Hole Saws to Create Round Faucet Hole and General Purpose Holes Dry Polishing - Various Surfaces Dry Grinding and Polishing, and General Purpose Grinding Polishing Ease Of Use & Versatility The wet polisher makes the stone, concrete polishing and fabrication easier and effortless, Converts an unfinished dull surface into a shiny bright countertop - Variable Speed Dial – One finger operated variable speed dial is on the top and in front close proximity to hand grip, Variable speed control matches the stone specific polishing speed for the best shine and faster polishing Soft Start – Soft start for non-jerk comfortable feel and better machine control, ensures work accuracy and perfection Works With 5" & Smaller Tools - Designed to work with 2", 3", 4" and 5" diameter tools. The polisher has 5/8" 11 male arbor to connect tools User-Friendly Water Line Garden Hose Quick Connect - In-built water quick-connect with a standard water hose Flexible Splash Guard - Flexible Splash guard to control water splash, reaches tight corners and adjusts to changing tools height Water Pressure Control & Water Stopper - To adjust water flow and stop water flow right from polisher while polisher runs Three Hole Water Flow - Three-hole water sprayer for even water distribution to unclogs cut particles Power & Control - Powerful Motor - Powerful 800 Watt motor Accessible Controls While in Use - Important controls Variable Dial, Water Control, On-Off

• VARIABLE SPEED WET POLISHER KIT FOR CONCRETE STONE COUNTERTOP - QuickT 5” wet polisher / wet sander / wet grinder kit with powerful 800 Watt motor features optimal wet polisher polishing speed; Designed for concrete countertop granite countertop stone marble tile wet polishing; Variable speed grinder polisher with Variable dial control to match required speed for stone concrete wet polishing or dry polishing.
• READY TO USE COMPLETE KIT FOR CONCRETE STONE COUNTERTOP - Ready to use complete stone granite concrete countertop polishing kit with all required tools, includes set of diamond polishing pads, backing pad for concrete or stone granite countertop or tile edge polishing.
• SEAMLESS GARDEN HOSE CONNECTION & EASE OF USE - In-built water quick-connect to garden hose, Water pressure control, Water Stopper, Extra-long water line, adjustable granite concrete wet polisher water flow line for easy use, three-hole 120 degree water hole for even water distribution, no dry spot for concrete polishing pads or granite polishing pads. Soft-start for jerk free start of wet stone grinder/concrete polisher, splash guard for water control, Top D-handle must for stone polishing
• ENHANCED ELECTRICAL SAFETY - Class-A GFCI for enhanced electrical safety to safeguard hazardous electrical shock, Double-insulation motor, with added rubber handle cover, Extra-long 12 feet industrial grade electrical cable
• ERGONOMIC HANDEL DESIGN - Ergonomic grip-size, soft back handle and top-handle. Head heavy concrete countertop polisher / wet stone polisher design transfers machine weight on the stone concrete polishing surface to increase polishing pressure and naturally enhanced polishing performance

User questions & answers

Question:	What is the RPM range
Answer:	In my experience, I believe I may have had the water flow to high which splashed onto the top of the polisher. Also I used it for long time periods (30 minutes plus). Once I purchased rubber gloves ($10 pair), I no longer got shocked. Overall the polisher did a beautiful job on my concrete countertops.
Question:	how do you remove the backing pad after has been installed
Answer:	These are made to polish stone by using a series of diamond grit pads that start at about 50 grit up to 3000 then a polish pad. They will give you a glass smooth finish on granite or marble. I don't believe the cement based plaster that is used in pools has a fine enough grain to be polished to this smoothness. Most that I have seen use a coating to achieve the glass smoothness.
Question:	Is this a brushless motor
Answer:	I don’t see why not, but I believe that Corian can be sanded and polished using traditional paint processing and buffing tools and tech, so this kind of water-only polisher might be overkill.
Question:	Why are people getting shocked while using this product
Answer:	yes you can and yes it is 5/8

Product description

TORQ Tools set out to develop an auto detailing tool that anyone can use, enjoy, and afford. The TORQX Random Orbital Polisher is the machine for the enthusiast detailer and weekend warrior who wants one machine to do it all. With the TORQX, anyone can polish paint, remove swirls and scratches, spread wax and sealant, scrub carpet, clean and restore clarity to headlights, and more. TORQ engineers designed the TORQX with simple and intuitive controls, rugged components, and durable build materials to last for years of dependable detailing use. The powerful 680 watt motor of the TORQX delivers the power and torque needed and demanded by enthusiasts and professionals alike. The TORQX uses the same gentle dual action motion and 8mm throw that enthusiasts and professional detailers know and trust even on the most sensitive or durable paint finishes. The TORQX is the powerful machine that won't bog down on any polishing, waxing, or hardcore cleaning job on any vehicle. Easily polish single stage, clear coat, or new ceramic clear coat paint finishes, polished metals, glass, and clear optical plastics with the TORQX. The tight form factor and precision balance of the TORQX fits comfortably in the hand and is perfect for any detailing situation. Use the TORQX to comfortably polish cars, trucks, large RV or trailer sidewalls, boat and airplanes, and any other automotive surface without strain or fatigue. The TORQX is the machine of choice for any beginner, hardcore enthusiast, or professional detailer looking for one simple, lightweight, and powerful machine that can do it all. Tackle any detailing task with the TORQX.

How To Use It:

1) Shake well and apply 4-5 drops of V36 to Orange Pad.

2) Prime pad with Pad Conditioner.

3) Dab product out evenly across 2' x 2' section.

4) Turn on machine on surface to speed setting 1 to spread product.

5) Increase speed to 5-6 and using moderate pressure.

6) Work area in 2-3 passes until product becomes clear.

7) Examine results. If you are satisfied with results, proceed to step 10.

8) If you are not satisfied with results, try using V34 with the Orange Pad; if you are satisfied, proceed to step 10.

9) If an even more aggressive approach is needed, switch to the Yellow Cutting Pad.

10) Refine finish with white pad and V38 Final Polish.

11) Work until optical clarity is achieved.

12) Remove residue with clean microfiber towel.

• Polishes and removes swirls, scratches, and defects from all painted vehicles
• Developed for enthusiasts and professionals using heavy-duty construction
• Applies wax, sealant, and glaze in minutes. Power : 700 W. Voltage : 120V
• Easy-to-use features for any detailing enthusiast or professional; Dynamic performance
• Designed with streamlined controls for maximum comfort on any automobile surface. The wide 2800 - 7800 RPM power band is ideal for polishing, waxing, scrubbing, and cleaning, the torqx the perfect first machine that handles all detailing jobs

User questions & answers

Question:	How big of a throw does it have
Answer:	8mm throw
Question:	The pads and compound/polish that comes with this kit is by Chemical Guys right? What size are the pads
Answer:	The pads I received with this kit are the 5.5" variety.
Question:	Can this polisher used for waxing too
Answer:	Yes. You pick what type of wax, compounds, glaze(s), you want to use. This machine is replacing the elbow grease you would be needing with a rag. But the chemicals and steps you choose to take to make that final car of yours shine is what you need to figure out. Chemical guys has plenty of great products and great you tube videos and tutorials. This machine works great. Just gotta know what waxes and othe products you need based on the current condition of the paint/car is in.
Question:	Whats the difference between this and the 10fx
Answer:	This one is 680 watts, fx is 700. The overall shape differs also, if you are going to do your own cars this is fine, if your doing this for business get the fx.

Product features

Designed For The Professional, Perfect For The Enthusiast

TORQX is the perfect first machine polisher for any detailing enthusiast or starting professional. Whether you have one garage queen, two daily drivers, or a fleet of customers’ cars to care for, the TORQX executes every detailing job quickly and easily, and with better results than going by hand alone. The powerful motor, 8mm dual action orbital throw, and compact design deliver powerful and consistent polishing, paint correction, and cleaning results with minimal fatigue and wear on the user. Variable speed controls allow the user to adjust the power output on the fly. Take on aggressive scratch and oxidation removal, scrub spills and stains from carpets, or spread the most exquisite coat of wax over sensitive paint finishes with just one machine.

Switch Backing Plates To Polish Any Area, Large Or Small: Streamlined Integratio

Detailers can easily switch between 3 inch, 5 inch, and 6 inch backing plates for improved versatility. TORQ Tools applied a Streamlined Integration engineering approach to make the TORQX accept 3’’, 5’’, and 6’’ backing plates without extensive modifications, or voiding of warranties. Simply use the included TORQ wrench to remove and swap backing plates to handle any size job. Traditional dual action polishers require extensive modification and counterweight changes to change pad sizes without voiding the warranty. Different detailing jobs require different size buffing pads and backing plates. The TORQX comes equipped with a durable 5” backing plate for use with all 5.5 inch buffing and polishing pads. 5.5’’ pads strike the perfect balance to polish flat and curved panels with ease.

Balanced Ergonomic Design (BED): Comfort During Extended Use

TORQ engineers designed the TORQX to work with the user for enhanced comfort and superior polishing results. The extended comfort front handle grip, tailored body length, and 5’’ backing plate size maximize leverage and polishing efficiency, and minimize the pressing force needed to polish paint effectively. TORQ engineers also placed the speed control dial in the middle of the body of the TORQX: right above the user’s thumb during operation. Intuitive placement of speed controls keeps detailers focused on the job with adjustments easily made on the fly. Integrated cooling vents channel air through the handle to cool the motor, buffing head, and counterweight for extended polishing jobs and machine lifespan. The power switch is tucked away from the action at the back end of the machine, and is easily reached while still controlling the machine through shutdown with one hand.

TORQ Forward Grip (TFG): Designed For The Detailer

Poor machine ergonomics leads to fatigue, sore joints, numb arms and fingers, and poor polishing results. TORQ engineers use an 'outside-in' design approach to fit the machine to the user’s comfort and working conditions. The textured front handle gives superior comfort and control with less fatigue while polishing on any flat or vertical surface. More comfort and control gives users a smoother polishing experience for better polishing results in less time.

Compact And Versatile Detailing Machine

The TORQX Random Orbital Polisher is the perfect first machine for the weekend warrior enthusiast, and also makes a great addition to any professional’s detailing arsenal. The compact form factor of the TORQX makes it perfectly suited for polishing in tight areas on any vehicle. The TORQX uses standard 5/16’’ - 24 spindle thread backing plates; switch to 3’’ backing plates to polish small areas or 6’’backing plates for extra large panels.

Precision Power P² - Power Flex Technology

Electronic control systems increase power smoothly upon startup to reduce wear and tear on the motor and internal components. The built-in Precision Power (P²) controller gradually increases power as speed settings increase. This clever adjustment takes only a fraction of a second, yet greatly improves the life of the motor and moving components, and reduces the likelihood of flinging product off the pad of the machine by managing power fluctuations gradually. The TORQX leads its class in smooth startup and running conditions, and is a pleasant tool to use and work with.

Product description

The SECCO variable speed wet polisher is a low rpm (1000 - 4000) water feed angle grinder. The use of this tool is required when polishing with diamond tools which require the use of water and low RPM's. SECCO has been providing quality tools to concrete and granite fabrication professionals for years. This unit is equipped with an 800 watt 8 amp motor and features a variable speed dial located at the rear of the grinder. The RPM range of this unit is 1000- 4000 rpm. The polisher has a quick connect brass coupling and is supplied with all necessary hoses and connectors to hook up a standard garden hose. The arbor is 5/8-11 UNC thread and is compatible with all 5/8 threaded and non threaded tools. Other features include: * Integrated GFCI (operator protector circuit breaker) * 360 degree adjustable 4" safety guard with integrated rubber splash skirt. * Aluminum bail handle (D handle) (A must have for wet polishing and grinding) * Wrench assortment * Arbor nut assortment (for attaching non threaded tools to the grinder) * Extra carbon brushes (Wearable replacement motor component) * Water adjustment valve * 12' heavy duty contractors grade cord (most grinders have 6') * Double insulated * Water on/off valve with quick connect * All water lines and garden hose adapters * Brass water diffuser integrated into arbor * DVS dust and water extraction shroud 4" granite and stone polishing pad set included! Always wear a rubber glove to operate this grinder/polisher to prevent electric shock/tingling.

• Hardin Variable Speed Wet Polisher
• 4 Inch Premium Granite and Stone Diamond Polishing Pad Set
• 1 Each 50, 100, 200, 400, 800, 1500, and 3000 grit
• 5/8 - 11 Threaded 4 Inch Rigid Hook and Loop Backer Pad
• Integrated GFCI (operator protector circuit breaker)

User questions & answers

Question:	can a shop vac be hooked up to this tool to make less of a mess
Answer:	Yes.
Question:	Can this unit and pads be used to polish concrete countertops
Answer:	Yes, it will work perfectly.
Question:	Can this polisher be used as a hand held stone router
Answer:	I think it will work on any washer.
Question:	Mine didn't come with an owner's manual. It came with a few pgs of instructions, but nothing that described how to put the unit together
Answer:	The hose is 20 feet long as clearly described in the description. Both the 15 foot and 25 foot answers from 2014 are incorrect.

Product description

Achieve professional results when profiling and polishing stone counter tops and surfaces with the Hardin VSP wet polisher. This is our new Hardin industrial grade variable speed wet polisher / grinder. This professional unit is equipped with a 950-Watt 8.29-Amp variable speed motor and features a variable speed dial for optimal control. You can operate from 2,000-4,000-RPM. Optimal polishing results are achieved at 2500-RPM. The Hardin VSP polishing kit is simple to use. Hook the end of the 5-Feet 1/4-Inch water line to a standard 5/8-Inch garden hose as a water source. The profile wheel works much like a router bit works. Has a flat surface that rides on top of the material being worked on. The bottom of the wheel is equipped with a guide bearing that rides up against the side of the material. This keeps the bit 100% true. Apply some force parallel to the working surface, and you're on your way to profiling your custom edge. This Hardin VSP polishing kit with granite and marble pads is the ideal kit for this application. Start polishing with the 50-Grit pad and continue polishing with each successive-Grit until you achieve that factory shine. The pads in this kit are not general or all purpose polishing pads. They are professional grade 4 diameter X 3MM thick granite and marble pads manufactured with a softer bond resin that releases the diamonds at the proper rate for hard materials. The final pad in the kit is the 10,000-Grit buff pad. This unit is equipped with a 5-Feet 1/4-Inch water line that is positioned under the polisher. The end comes with a brass 5/8-Inchcoupling to thread onto a common garden water hose. The standardized 5/8-11 UNC spindle thread makes it compatible with most attachments on the market. Built-in GFCI protects the operator. Also included with this unit is a vacuum brazed profile wheel, bail handle, side handle, spindle wrench, and extra carbon brushes.

• Variable speed 700-3000-RPM
• Heavy duty 800 Watt
• Built in GFCI
• Grit: 50, 100, 200, 400, 800, 1500, and 3000
• Radius vacuum brazed profile wheel: 3/8-Inch

User questions & answers

Question:	Can a diamond blade be used on this polisher for cutting granite
Answer:	Never dyed one, but I'm assuming if its dark bleach it first. Since the dye itself is a direct dye, I leave it in for 3+ hours. My hair grows out before it fades and the color is brighter
Question:	Are the pads that come with this unit compatable with polishing concrete
Answer:	No, I know of nothing that makes this dye "less bright". My 19 year old daughter has used SPLAT for four years. If you've already used this dye and are unhappy with the color your best option would likely be to use a good color stripper. Color strippers shouldn't be used often as they really damage the hair. Using temporary dye is a good choice too. Choose one close to your natural shade then reapply until hair grows out.
Question:	Is this device is compatible with dual voltage? (120/240v 50/60Hz
Answer:	In order to achieve this color, you would have to bleach your hair.
Question:	can this item be used dry
Answer:	Yes this specific set is the reg hair dye.

Product description

DWP-1257 Variable Speed Wet Stone Polisher has new features to perform better than ever. These improvements include variable speed control switch with an automatic speed feed-back system to maintain consistent RPMS with or without a load. This makes it easier for users to see clearly the correspondence between RPM and the switch position they choose to do their polishing job. Furthermore, DWP-1257 has optimized the gear ratio, increased its torque output, makes the job for the operator much easier and efficient.

Specifications:

Rating : 120Volts 60Hz

Amperage : 7A

Power : 800W

Variable Speed : 700-3,000RPM

Weight : 6.5lbs/2.9kg

Spindle Size : 5/8"-11

Maximum Disc Diameter : 5"/125mm

Equipment Included:

Ground Fault Circuit Interrupter

Water Valve & Hose

Faucet / Garden Hose Adapter

Lock On Switch

Splash Guard

Extra Carbon Brush Set

Side Handle, C Handle

Important Note: It is very important to install the splash guard and control the amount of water used when polishing. You only need to keep the surface slightly wet to prevent dusts, otherwise water can go in the motor and lead to GFCI power protection to kick in and shut it down. When this happens, you need to wait for the motor to dry completely before push the RESET button on GFCI in order for the polisher to work again. This will cause delay in work time and affect motor life.

For light color stones, you may use our DWP4D7BH kit.

We DAMO Diamond Tools, LLC holds exclusive distribution to DAMO Trademark products as you can see clearly marked from the picture on the product listing.

• Best Value for Polishing Granite and Concrete Countertops;
• DAMO 4" 2.7mm Wet Polishing Pads Set of 8 including grit 50,100,200,400,800,1500, 3000 and black buff;
• DAMO 5" DWP-1257 Variable Speed Wet Stone Polisher;
• DAMO 4" Semi-rigid Back Holder;
• Wet applications only.

User questions & answers

Question:	Is there a manual available online
Answer:	Thank you for your questions. The term universal is meant to be applied to AR products. With that being said, if the high pressure hose outlet has a 22 mm fitting with either a 14 or 15 mm inner diameter it should work.
Question:	Why doesn’t On/off switch stay on? You have to keep your thumb/finger on the switch to keep the polisher running
Answer:	1800. That is with the nozzle dialed down to a fine point. Set to a 4 to 6 inch spray width it probably averages about 1000 to 1200 psi. Good light duty washer, but for stained concrete or siding, you may want to look at 2500 psi and up gas units. This is however a great little unit for washing cars or fences or the back porch.
Question:	whats the difference between this model and DWP
Answer:	They are all different grit levels. The red pad is more for polish where the blue and green pads are for medium and more course cleaning. I use the green pad for clean my concrete floor in the garage. For inside I use the blue brush for tile floors.
Question:	Would you describe this tool as hard/easy to use? I am interested in working on slate countertops, I have no experience using this type of equipment
Answer:	I bought it for the oreck 550 machine and it worked perfect for me. I have no idea what the oreck 440 is. Maybe if you compare the measurements of your machine.

Product description

The newly improved Kawaii electric stone polisher model WEP250 is a true wet polisher designed more for professionals. It features variable speed from 900 -2800 RPM more suitable for polishing jobs on granite and concrete. Two-level reduce gear, more torque with constant speed provide a more consistent polish. It has Ground Fault Circuit Interrupter for safety protection, lock on switch, center water fed, 10 feet water hose with connector to garden water, and splash guard. It has double insolation for added safety. The stone polisher can be used for edge profiling with diamond hand profilers, wet polishing of stone and concrete with diamond polishing pads. Kawaii WEP250 can only be used for polishing and light grinding. Heavy grinding and cutting with saw blades can damage the gear.

• Maximum disc size: 5"
• Variable speed from 900-2800 RPM
• 10 feet water hose with connector to garden water
• Center Water-Fed Underneath with Hose
• Ground Fault Circuit Interrupter

User questions & answers

Question:	Does the polisher come with a pad holder
Answer:	No the machine is 13 inch long.
Question:	What size and thread is the spindle? Is it the same as Makita and others
Answer:	This kit has the same wet polisher SWP101K as in your given link. It also has diamond polishing pads set and backing pad.
Question:	how do i get a hold of manufacturer of the polisher? only had about six months. when it gets a little wet it shocks me
Answer:	Both the kit SWP102K and SWP105K has the same wet polisher SWP101K. The difference is the polishing pads. SWP102K has polishing pads that is designed for Granite edge and Granite Flat surface polishing. SWP105K has polishing pads designed for Concrete Polishing.
Question:	Size - Is this 18 inches Long
Answer:	The polisher & Polishing pads will work pretty well on Travertine. For best performance on Travertine use the following:https://www.amazon.com/Stadea-SWP102K-Polisher-Granite-Polishing/dp/B01N3OC4D8It has the same wet polisher, but high performance diamond polishing pads.

Product description

Hardin GHWV4POLSET VS5 variable speed wet Grinder Polisher, 8 pc 4" diamond polishing pad set

• Country Of Origin: United States
• Model Number: GHWV4POLSET
• Item Package Dimension: 17.0" L x 7.25" W x 6.0" H
• Item Package Weight: 9.02875 lb

• Stadea Stone Concrete Countertop Grinder Polishers Wet Polishing Kit with Wet polisher, 4" Diamond Polishing Pads set, 4" rigid rubber hook loop velcro backing pad. 5” Stone Wet Polisher with DTM+ motor gear system features enhanced power and optimal speed required for stone concrete wet polishing or dry polishing; Variable dial control to match speed of either stone polishing process, Minimum RPM: 700; Maximum RPM: 3000
• Kit includes Stadea Series Standard A Wet set of seven 4" diamond pads for concrete marble surface polishing and stone granite edge polishing. Also inlcudes 4" rigid rubber backing pad with 5/8" 11 thread. 7 Pieces diamond polishing pads are one each for grits 50, 100, 200, 400, 800, 1500, 3000.
• Ergonomic grip-size, long, out of core, soft back handle design transfers minimal polisher weight to back handle minimizing back hand fatigue and this along with the innovative head heavy polisher design together transfers machine weight on the stone concrete polishing surface to increase polishing pressure naturally aiding enhanced polishing performance, and minimizes back hand fatigue; Out of body back handle eliminates air vent hand blockage increasing motor performance and durability
• In-built water quick-connect to standard water hose, Water pressure control, Water Stopper, Extra-long water line, under-polisher water flow line does not interfere with polisher handling during usage, three-hole 120 degree water hole for even water distribution
• Arbor lock for easy release of tool accessories, Soft-start, Polisher one-push power start & lock switch for ease of use, splash guard with vacuum connector for water and dust control, Dual handle for multiple use cases, Top D-handle must for stone polishing, ambidextrous side handle for easy multi-purpose use, ergonomic back handle. Class-A GFCI for enhanced electrical safety to safeguard hazardous electrical shock, Double-insulation motor, Extra-long 12 feet industrial grade electrical cable

User questions & answers

Question:	Is the wet polisher in this kit the same as the polisher only at https://www.amazon.com/gp/product/b01hsh1bkk/ref=ox_sc_act_title_1?smid=a1fgmtxwspt
Answer:	This tool is made in Germany!
Question:	What is the difference between the swp102k vs swp105k? It appears to be only the wet polishing pads that are different
Answer:	The unit I purchased did not come with the backer pad. I purchased a separate backer pad for the grinding pads I used.
Question:	Will this polisher work on travertine tile
Answer:	All I can tell you is the water comes out of the center of the drive spindle. I never buffed or polished a car, I would think it is a little fast? Great Tool

Product features

Variable Speed

Allow Change in Speed While Polisher is in Use -

Placed on top of polisher and right in front of the hand grip, the variable speed dial allows an operator to change speed with a thumb while polisher is in use.



One finger-touch operation -

Easy to change polisher speed



Match Stone Polish Speed - 

Variable speed control matches the specific polishing speed suitable to various stones surfaces

3 Hole Under WaterLine

Non-Interfering UnderWater Line -

The water line is placed at the bottom on the polisher, it allows clean top surface without any water line for non-interfering faster polishing.



Even Water Distribution -

Three-hole water head each at 120 degrees for even and adequate water distribution. It ensures continuous wet surface at high or low RPM. 



Zero Dry Spots -

Water distribution control and 3 hole water flow optimal water flow for zero dry spots during wet polishing.

Water Control-Connect

Quick-Connect to Standard Water Hose -

Built-in water quick-connect adapter to connect to a standard water hose.

Long water line for reaching long countertops.



Stop or Adjust Water Flow While Polisher in Use -

In-built quick-access water control to

• Adjust water flow
• Stop water flow

to match exact water flow needed, and eliminates guess work. Located close to hand grip for Quick access and One hand operation

GFCI Double Insulation

Cuts Off Electricity - GFCI - 



Built-in GFCI security against electrical shock while Wet polishing process. The polisher cuts off electricity in case of electrical shock.



Double Insulation for Electrical Safety -

The double insulated polisher provided the electrical safety. Along with GFCI, Splash guard it provides multi-layered electrical hazard safety for the operator.



Extra Long Electrical Cable - 

Industrial grade 12 feet extra long electrical cable line for

• Easy access to long counters
• Easy maneuvering

Ergonomic Handles

Comfortable Handles for Longer Operation -

All three handles (Back, Top D, Side Handles) are ergonomically designed for longer comfortable operations. 



Easy to Apply Pressure with Top D-Handle - 

Placed right above the heavy head, the top D handle provided adequate pressure on the surface easily for the best polishing result. 



General Purpose Ambidextrous Side-Handle -

Can be used for left handed or right handed operations. It is very useful for general purpose grinding polishing. 









 

Head Heavy & Balanced

Less Tiring Longer Operation -

Head Heavy Design transfers the maximum polisher weight on the polishing surface and minimum weight on back handle. It causes minimal pressure on the backhand,  and make the polishing process less tiring. It makes longer operations easier and possible.



The ergonomic back-handle works as a guide and comfortable to grip and operate



Balanced - A well-balanced machine for better control





 

DTM+ Power, Soft Start

Optimal Power For Wet Polishing -

Powerful 800W motor to drive the optimal power. Stone Concrete polishing needs constant speed on varying load, DTM+ Gear System is designed to maintain contact speed giving the best polishing performance.



Jerk-Free Start -

Soft start of the motor for better control and easy jerk-free start. Ensures work accuracy and perfection

One Push Lock Switch

One Finger Touch On-Off Switch - 

Placed below the back-hand grip of the polisher, the on-off power switch allows an operator to on and off with a finger.



Continuous Operation Without Holding Power Switch -

The power lock button locks the machine for continuous run, allows the operator to keep the machined powered on without continual pressing on the button. Placed below the back-hand grip, it has quick access while polishing is in use.

Flexible Splash Guard

Polishes Corners and Uneven Areas - 

Flexible splash guard can flex to reach corners and provides maximum reach for polishing. It can flush on uneven surface to provide maximum water protection. 



Matches Tools Height for Maximum Water Protection -

High-quality rubber flexes to match the reducing height of tools as it grinds down. It creates a flushed cover to provide maximum water protection and coverage.  

Arbor Lock

Faster Release of Accessories -

The arbor lock on top of polisher arbor locks the arbor for faster release of tool accessories - backing pad, profile wheels etc.



Optional Wrench Included -

The optional wrench also comes with the tool, the accessories can also be opened with the wrench. Refer to the section, What is the box for the complete list of items in the package.

Concrete Polishing Kit

Diamond Pads for Concrete Polishing - 

Kit includes 4" Backing Pad and 4" diamond polishing pads set designed for

• Concrete & Marble Surface and Edge Polishing
• Granite, Quartz, Stone Edge polishing
• Set of 7 diamond polishing pad for a high gloss finish
• Rubber backing pad for countertop polishing

What is in the box

What is in the Box -

1. Wet Polisher
2. Water Shroud
3. Top Handle
4. Water Hose Adapter
5. Gear Box Cover
6. Side Handle
7. Carbon Brushes 
8. Water Bush
9. Wrench
10. Manual
11. 4" Backing Pad
12. 7 Pcs - 4" Diamond Pads Set