14 best ryobi spindle sanders

Product description

Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited. You'll really appreciate this bench top version. With its large table surface and six different sanding drum diameters stowed neatly under the table the right sanding drum is a quick change away. Includes spindle wrenches table inserts and a 2-1/2" dust port. • Motor: 1/3 HP 110V single-phase 4A 60 Hz • 1725 RPM spindle speed • Toggle ON/OFF safety switch with locking tab • Extra large 20" x 14" table • Spindle oscillates at 72 SPM • 2-1/2" dust port • Comes with six 4-1/2" tall sanding spindles three 80 grit sleeves three 150 grit sleeves and 6 table inserts • Approximate shipping weight: 37-Pound.

• Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited
• You'll really appreciate this bench top version
• With its large table surface and six different sanding drum diameters stowed neatly under the table the right sanding drum is a quick change away

User questions & answers

Question:	When you say a bare tool does that mean that the spindles and sanding drums pictured are not included
Answer:	All spindles and sanding drums are included.
Question:	Can the table be angled
Answer:	No. The table is not adjustable.
Question:	Can anyone tell me the actual sanding area/height? The spindles are 4.5", but a portion of that is below the table. Can't see anything in the specs
Answer:	3.5" above the table or a little less if you are using the smallest diameter sanding spindles because of the top locking washer overhang.
Question:	What is the stroke up and down
Answer:	Not sure. Stroke is about 1”, maybe every two seconds.

Product features

1/3 Horsepower Benchtop Oscillating Spindle Sander

Nothing beats the versatility of an Oscillating Spindle Sander for smoothing curved edges, and when space is limited, you'll really appreciate this benchtop version. With its large table surface and six different sanding drum diameters stowed neatly under the table, the right sanding drum is a quick change away. Includes spindle wrenches, table inserts, and a 2-1/2" dust port.

Safety Paddle Switch with Removable Key

2-1/2" Dust Port

Includes: Six 4-1/2" Tall Sanding Spindles, Three 80-Grit Sanding Sleeves, Three 150-Grit Sanding Sleeves and 6 Table Inserts

Sanding Drums Store Neatly in the Base for Easy, Organized Access

Specifications:

• Motor: 1/3 HP, 110V, single-phase, 4A, 60 Hz
• 1725 RPM spindle speed (no load)
• Toggle ON/OFF safety switch with locking tab
• Extra large 20" x 14" table
• Spindle oscillates at 72 SPM
• 2-1/2" dust port
• Comes with six 4-1/2" tall sanding spindles, three 80 grit sleeves (1/2", 1" and 2"), three 150 grit sleeves (3/4", 1-1/2" and 3") and 6 table inserts

Product description

Sanders are an essential tool for any DIY person, carpenter, or craftsperson. However, most sanders can not effectively get in tight spaces like corners. This Ryobi Sander is perfect for this situation. It is part of the One+ family which means it is compatible with Ryobi 18-volt batteries. This powerful, ergonomic tool orbits at 11,00 orbits per minute for a smooth finish on your wood projects. Sanding wood will bring dust. Tackle all of this dust by attaching your favorite wet/dry vac to this tool with the on board vac attachment. This product also includes 3 pieces of sandpaper to get you going. Simply attach it using the hook and loop system. Never miss a tight space again while sanding. Finish the job right, with this Ryobi tool.

• 11,000 ORBITS PER MINUTE helps result in virtually non-swirl finishes
• PERFECTLY SHAPED FOR CORNERS with intuitive design
• COMFORTABLE OVERMOLD provides a solid grip so that you can sand precisely and comfortably
• ON BOARD DUST PORT allows you to attach your favorite shop vacuum (not included)
• PART OF THE ONE+ FAMILY: This will work with Ryobi’s 18v One+ battery. Even the yellow Ryobi 18 Volt batteries will work

User questions & answers

Question:	Can I use it on cars paint
Answer:	I'm not sure about that, but I suspect that means a greater number of sanding sheets. Beside that, the one I got died after only about six months of use, and I don't mistreat my tools. I won't order this again. When you buy the batteries these days, what you often get is ones that don't seem to last nearly as long as the ones we used to get in the early days. I sent an email to Ryobi which I've not gotten a response to.
Question:	do you have to have a charger or does it have a power cord
Answer:	I don’t know. The zipper failed and I had to throw it away. It only lasted about 4 months.
Question:	What size sanding pads should I order to go with this
Answer:	It’s not meant for really heavy books. If you are looking for a backpack that’s for light use or a larger purse this would work. Mine had a bad zipper from the start and only lasted 4 months. I have been happy with the other Amazon brand products I’ve purchased.
Question:	what's the difference between the premium and original pack
Answer:	It doesn’t have any padding in it and I don’t think it would be good for a tablet or laptop. Yes, it would hold a tablet or small laptop.

Product description

Shop Fox W1831 Oscillating Spindle Sander w/ 5 Rubber Sanding Drums & 6 Sleeves

• 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
• Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
• Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
• Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
• Weighs 30-Pound

User questions & answers

Question:	Will this work on hardenable steel? 1/2 hp seems a little low for it
Answer:	No, this is for woodworking. You would need to purchase a grinder for harden steel.
Question:	Can a vacuum be connected to this unit
Answer:	Yes, you can hook up a vac to it. It has a 1 1/2" plastic connector that sticks out of the back of it. You will need to size your vac to fit over this.
Question:	Does it have a tilting tabletop
Answer:	No it does not have a tilting table but it is a very good sander.
Question:	What's the Spindle Stroke on this
Answer:	5/8"

Product features

Shop Fox W1831 Spindle Sander

This benchtop Oscillating Sander is ideal for smoothing edges after cutting with a bandsaw or scroll saw. Fifty eight oscillations per minute ensures even sanding and six sanding sleeve diameters let you sand a full range of inside curves down to 1/2-inch diameter.

Six Spindle Sizes

With six sanding sleeve diameters, this compact sander will handle just about any sanding task you throw at it. The on-board storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and easily accessible.

The various inserts included with the W1831 are used to close the gap between the table insert and drum which reduces the risk of pinching and offers more work support for your sanding jobs.

Built-In Dust Port

The built in 1-1/2-inch dust port ensures a cleaner shop and less airborne dust particles when connected to a dust collector.

Locking Power Switch

The locking power switch with removable key helps protect against unauthorized use and heavy duty cast iron table offer plenty of work support; all which make this a great bench top machine.

Product description

The Ryobi P450 is a belt sander that will work for many home improvement projects. It’s cordless, so you can work on furniture and flooring alike. You can collect dust with the included bag or hook this tool up to a dry vacuum for endless collection. While you’re sanding at 850 feet-per-minute, you can be sure it’ll be comfortable. It has a rubber grip and adjustable pommel for maximum ergonomics. The motor is located at the front, too, for an even weight distribution. A sanding belt is included, too. All you need is a battery to get to work on the projects you need. Get it done with Ryobi.

• BRUSHLESS MOTOR: This tool has greater runtime and lifetime than its brushed counterparts
• INCLUDED ACCESSORIES: A reusable dust bag and 80-grit sanding belt are included to make an all-in-one package
• ADJUSTABLE POMMEL: You can move the pommel up to five different positions for maximum ergonomics
• COMFORTABLE GRIP: The handle is covered in a rubber molding that improves your grip and gives you comfort over extended use
• ONE+ COMPATIBLE: This tool is compatible with Ryobi’s 18V lithium ion One+ battery line. Compatible models include the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Does this come with the dust bag
Answer:	Yes. I've only used it on one project so far. Charge doesn't last long, so make sure you have 2 batteries. Does a great job.
Question:	Is there an option to plug in with an extension
Answer:	Have only used on home remodeling.
Question:	What size belt does this use
Answer:	It's cordless and uses Ryobi 18v batteries (not included). If you don't already have Ryobi 18v cordless tools in your inventory, you'll need to purchase a battery and a battery charger.
Question:	Does this use 18 v batteries
Answer:	i got this sandpapers for my ryobi and they work great even have the holes line up https://www.amazon.com/Detail-Sander-Sandpaper-Sanding-Assorted/dp/B0764K4G6N/ref=sr_1_14?ie=UTF8&qid=1525984646&sr=8-14&keywords=mouse+sandpaper

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

Featuring design improvements like a relocated and sealed on/off switch (to prevent dust infiltration), and shelves for storing your five complete spindles, the JET 708404 JBOS-5 5-1/2 Inch 1/2 HP Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase is a true powerhouse. Its tilting table, spindles with threaded ends, and robust induction motor tackle the toughest sanding projects with ease.

Oscillation Reduces Friction and Ensures Consistency

The JBOS-5 creates a one-inch oscillating action that reduces friction heat, thereby protecting your wood pieces and prolonging the life of the sleeve. Its main spindle support also runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for reliable, consistent performance job after job.

Additionally, the oscillation gears run in a sealed, lubricated box to prolong their life and durability.

Powerful Induction Motor for Reliable Performance

The JBOS-5 comes equipped with a powerful 1/2 HP induction motor that easily handles all your sanding projects. And thanks to the table inserts and a built-in, two-inch dust port, you won't have to worry about dust and debris falling into the motor and marring its performance, compromising your view of the workspace, or causing injuries and accidents.

Tilting Table for Bevel Sanding

To give you the flexibility to handle a variety of jobs and material sizes, the JBOS-5's table tilts to 45 degrees. This tilting ability also accommodates bevel sanding projects.

Safety Features for Smooth Operation

Designed for safe and smooth operation, the JBOS-5 boasts several innovative safety features. First, a removable on/off safety switch prevents accidental start-ups. There are also built-in storage racks to keep spindles and table inserts handy and within safe and easy reach. Finally, the benchtop includes four non-skid rubber feet to keep the machine stable during use.

Quick Spindle Changes and a Scratch-Free Finish

You can trust the JBOS-5 to deliver precise, quality results in less time. Spindles have threaded ends for quick, easy changes, and a one-inch spindle ensures a scratch-free finish.

The JBOS-5 measures 17 x 20.8 x 18.2 inches (WxHxL), weighs 82 pounds, and is covered by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

Complete 1/4-, 1/2-, 5/8-, 1-1/2 and two-inch spindle assemblies, two round table inserts, and two oblong table inserts.

From the Manufacturer

With a large cast-iron workspace and table that tilts to 45 degrees, this 1/2 hp sander can accommodate even the heaviest sanding project. The 1-inch spindle has an oscillating action that provides a scratch-free finish and prolongs the sleeve life. Other features include non-skid rubber feet to prevent movement while in use, removable safety switch, and a built-in dust port. Sander comes with 1/4-, 1/2-, and 5/8-inch spindles, 1-1/2-and 2-inch complete spindles, and two round and two oblong table inserts.

FEATURES

• Large cast iron workspace to handle all your projects Table tilts to 45 degrees handle all bevel sanding projects
• The 1" spindle oscillating action provides a scratch free finish and prolongs sleeve life
• Powerful 1/2 HP motor can accommodate even the heaviest sanding projects
• Four non-skid rubber feet prevent the machine from moving while in use
• Built in diameter of dust port to collect the dust before it becomes airborne
• Removable safety switch
• Oscillation gears are encased in a lubrication box to greatly prolong life and durability.

STANDARD EQUIPMENT

• Complete 1/4", 1/2", 5/8", 1-1/2" and 2" spindle assemblies
• 2 round table inserts
• 2 oblong table inserts

SPECIFICATIONS

Model: JBOS-5

Table Size (in): 14 1/2 x 14 1/2

Table Tilt (Down): 0 - 45 degrees

Spindle Speed (RPM): 1,725

Oscillations (per minute): 30

Length of Oscillations (in): 1

Motor (TEFC): 1/2 HP, 1Ph 110V

Net Weight (lbs): 77

• VERSATILITY: Table tilts up to 45°.
• LONG LIFE: 1" oscillating action protects wood, and prolongs sleeve life.
• EFFICIENCY: Spindles have threaded ends for fast, easy changes.
• CONVENIENCE: Built-in storage racks keep spindles and table inserts nearby.
• SAFETY: Removable on/off safety switch prevents accidental start-up.

User questions & answers

Question:	What is the maximum spindle diameter that can be fitted
Answer:	I believe a 3”. I am not sure if jet still offers a 3” spindle, but they did when I got mine. But I had to go to the jet web site. Good luck.
Question:	what's the foot print of this machine and how high is it
Answer:	Base bottom is 12" square, top plate is '19 high. It's a fine instrument and I enjoy using it.
Question:	If the sander spindle is 5 1/2" will the 6" sanding sleeve work on it
Answer:	On my Jet sander, the spindles and sleeves vary from 5-1/2 to 6". (The smaller diameter sleeves are the longer ones for some reason. ) I see no problem putting 6" sleeves on 5-1/2" spindles, and vice versa. I like this sander a lot, by the way.
Question:	Is the table cast iron
Answer:	Yes the table is cast iron with steel center inserts.

Product features

SPINDLE ASSEMBLIES AND SLEEVES

This sander includes five sanding spindles and sleeves (100 grit).

• 1/4" x 6"
• 1/2" x 6"
• 5/8 x 6"
• 1-1/2" x 5-1/2"
• 2" x 5-1/2"

TABLE INSERT PLATES

Four table inserts are provided, to prevent dust and debris from falling into the motor, and help protect operator.

• 3/4" Round
• 2" Round
• 3/4" Oblong
• 2" Oblong

LARGE 14-1/2” TILTING TABLE

Table tilts up to 45° to accommodate bevel sanding projects.

Product description

Big Horn 19521 Sanding Drum Set lets your drill press do double duty as a spindle sander. You'll be ready for virtually every job with this quality set of drums and sleeves. Includes five expanding drums in sizes 1-1/2" by 2-1/2", 1" by 2-1/2", 3/4" by 2-1/2" and 1/2" by 2-1/2" . Also includes two sets of sleeves (two fine sets and two coarse sets). These drums will also work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum.

• A selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums
• Kit includes cloth backed all-resin-bond abrasive bands for each sized drum
• Drum can be used with the portable electric drills, flexible shafts and drill presses
• Drums use friction fit design - no adhesive needed

User questions & answers

Question:	What is the shaft size?? Does not look the same for all drums in the photo
Answer:	I can be used on the supply side or the low pressure side. Not made to withstand any pressure greater then house supply pressure.
Question:	I bought this kit already and love it but where can I buy sleeves. Nothing listed on this sight for
Answer:	It’s a plastic handle, one nozzle is metal. The hose is beyond awesome so nozzles, although great, are not the reason for my purchase of 2 of these hoses! They are simply wonderful and have made watering beyond easy!
Question:	Hi, can you direct me to a seller for 200-600 grit replacement paper
Answer:	Hello, Inner Diameter: 3/8" Outer Diameter: 5/8"(16mm).
Question:	What is the length for each spindle/sandpaper
Answer:	Brass.

Product features

For Portable Electric Drills

The Big Horn 19521 Rubber Sanding Drum Set is a 20 piece bit set that is ideal for a variety of sanding jobs. This is a selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums to make your sanding applications easier. These drums can be used with the portable electric drills, flexible shafts and drill presses as well.

Freehand Sanding

This set will work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum. If you want to smoothen a surface, you will be able to use the Big Horn 19521 Rubber Sanding Drum Set on various materials such as wood and more.

Product description

This item is Factory Reconditioned, some show more wear than others. Battery and Charger SOLD SEPARATELY

• Battery and Charger SOLD SEPARATELY
• Random orbit action provides a swirl-free finish
• Lock-on switch
• On-board dust collection bag
• This item is Factory Reconditioned, some show more wear than others

User questions & answers

Question:	Does it have various speed settings
Answer:	There is no extension 'cord' plug for the belt sander. I have never seen Ryobi offer a corded battery adapter either For the p450 Belt sander I could run it continuously cycling through three 4ah batteries letting the sander do the work and not pressing down on it.
Question:	Why are you charging almost doible for the regular tool-only price? I just bought thid exact item for $55 wirh free 2 day shipping
Answer:	75х457мм (3х18)

Product description

The Ryobi ONE+ 18-Volt Quarter Sheet Sander is the first ever cordless quarter sheet sander on the market. It's great if used for a variety of finishing applications and its cordless convenience makes it easy to move from jobsite to jobsite or anywhere around your home. It features a 1/4 sheet design that works with a majority of sandpapers and a lock on switch for easy operation. Its dust collection bag will keep your work surfaces clean, and its vacuum adaptor port will make clean up quick and easy (adaptor not included). With 12,000 RPMs and over 40 minutes of runtime, you will always have enough power to get the job done. This finishing sander is a great addition to your ONE+ collection

User questions & answers

Question:	How do i buy a sandpaper puncher for the ryobi p
Answer:	No, it did not but I had a battery from the corresponding drill. That's why the price is so low because it doesn't come with a battery. The batteries alone are around $40 (I think). I don't remember the exact price of each battery because I bought the drill about a year ago.
Question:	Will This Sander work on Drywall after plaster for a smooth finish
Answer:	on off only, works well
Question:	What size sandpaper is needed
Answer:	DO you know when you post your questions it asks everyone who bought one for an answer? Who cares if you bought one half this sellers price! In CA they sell for more at Home Depot so you scored then. Man I am getting tired of Amazon asking us to answer questions, LOL!
Question:	Does it come with a battery
Answer:	Yes it comes with a dust bag.

Product description

If there are flat or rounded wooden surfaces that need the grit and splinters taken off, the the Ryobi RS290G is the tool to do it right. It’s a compact unit that weighs in at only 4 pounds, letting you put your focus into hitting the spots you need to without worrying about your arms tiring. It has an ergonomic rubber molded to the grip that lets you keep an extra tight hold on the piece, even in slippery conditions. You’ll need that grip, too. At 12,500 orbits per minute, this compact device packs a punch. It’ll be able to run as long as you’re connected to power, drawing in 2.6 amps. Use it with the hook and loop sanding pads included for projects that need to be done as soon as you unpack the box. You won’t have to worry about sawdust getting all over your workplace, either. A bag conveniently located on the back of the unit sucks up sawdust while the motor runs, giving you the most vision of your project possible. Whether you’re refinishing cabinetry, perfecting your doors, or performing any number of renovations that need splinters taken out, the Ryobi RS290G is the sander you can rely on.

• DUST BAG: Keep your workspace neat with the onboard, removable dust bag that helps protect you from blowback while keeping your target visible
• HOOK AND LOOP PAD REPLACEMENT: A convenient hook and loop system makes quick pad changes a breeze
• INCLUDED SANDING DISCS: With these, you can use the tool right out of the box and pick up extras later
• ERGONOMIC HANDLING: The hex-notched rubber design allows you to keep a grip on this tool without worrying about letting it go, even in slippery conditions
• CONVENIENT ON / OFF SWITCH located next to the grip, so you can be sure you have a firm grip when you’re activating and turning off the unit. This way, it won’t get away from you

User questions & answers

Question:	can i get an adhesive backing pad for this sander
Answer:	Sure. The contact area will be small 5" wide by the line that it touches on outside curves.
Question:	Headline says it comes with "3 Pads". Does that mean 3 replaceable foam pads, onto which the sanding discs velcro? Or does it mean 3 sanding discs
Answer:	https://www.amazon.com/Ryobi-039176001022-Sandpaper-Puncher-S652D/dp/B01CPYS4JC/ref=cm_cr_arp_d_bdcrb_top?ie=UTF8
Question:	Opm is mentioned but not rpm. what is the rpm
Answer:	Yes it will work. Use the right grit of sandpaper for a smooth finish
Question:	Can you use it for rounded edges
Answer:	You would take a full sheet of sandpaper and then quarter it

Product description

For wood finishing jobs that need the compact touch, like certain furniture or cabinetry, you need a small enough detailing sander that can do the job right. Fortunately, Ryobi has released a 13,000 OBM sander that can work all day where you need it while bringing you minimal fatigue. The DS1200 is a powerful piece of work. Simply plug its 6 ft. cord into an AC outlet, attach one of the 5 included sanding pads onto the sanding head, and flip the switch. It runs automatically without you having to hold onto a trigger. This lets you have complete control over the tool with both hands with any kind of grip you’d like. Also assisting your grip is a rubberized hex-texture grip lets you work in slippery conditions. This is excellent if you’re working in a basement or garage, where conditions could potentially be damp. Whether you’re a professional or diy specialist, Ryobi has your back to get the job done right.

User questions & answers

Question:	can I buy a replacement pad to turn this into a hook & loop
Answer:	This is for detail work only - corners, edges, etc.
Question:	What are the exact dimensions of the triangular head/sanding pads
Answer:	I believe so, but if not then you can remove the Hook & Loop back and replace it with an Adhesive back on the pad using contact cement.
Question:	Would it work fine on 220V
Answer:	Just the sanding discs
Question:	I already have an oscillating tool. Any reason to get this as well
Answer:	the OPM replaces RPM. This is a great sander. Buy it, you wont be sorry. I am getting another one sonn.

• 20 PIECE DRILL PRESS ACCESSORIES: Create holes, smooth out rough edges and cuts, polish jade and other art materials, or contour irregular shapes into your projects with the ABN 20 Piece Drill Press Sanding Drum Kit; Use these drum sanders for woodworking and metalworking; All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization
• PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools; Each sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm)
• FITS YOUR TOOLS: Each drill drum sander attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools; Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments; Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool
• REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands; Each size features two 80 and two 120 sand paper grits to meet your needs; Mandrels fit other brands of sandpaper up to 2.5 inches in height
• BUILT TO LAST: Constructed of rubber grain and stainless steel, the 4 drill sanding attachment bits are designed for strength, and longevity; The 2.5-inch (6.4 cm) rubber drill sanding drums expand when they are spinning to secure the grit sleeve on the drum allowing for safer and more effective working conditions; The included drum sander sleeves are constructed of aluminum oxide

Product features

ABN 20 Piece Reusable Sanding Drum Kit for Drill Press Sander

Create holes, smooth out rough edges and cuts, polish jade and other art materials, or contour irregular shapes into your projects with the ABN 20 Piece Reusable Sanding Drum Kit for Drill Press Sander.

ALUMINUM OXIDE DRUMS

Sanding drum kits also includes 80 grit and 120 grit replacement sandpaper bands for each size mandrel. The included drum sander sleeves are constructed of aluminum oxide.

STAINLESS-STEEL SHANK

Constructed of rubber grain, each sanding drum features a self-expanding effect to provide a secure hold on the sandpaper roll and a 1-inch long stainless-steel shank that fits your 1/4-inch tools.

FIT FOR ANY BRANDS

These sanding spindles for drill press includes 4 reusable drum sander bit rotary tool sanding accessories that can fit any brands of sandpaper up to 2.5 inches in height.

Product description

Sanding is usually the part of a project that can take the longest and is the most messy with the dust flying up everywhere. Fix both of those problems with Ryobi's Portable Belt Sander. This compact hand sander was made for easy use, even in those hard to get to places. The handle was designed for a comfortable grip and the on/ off trigger switch has a lock-on feature for even more convenience. As you quickly sand with the powerful 6.0 amp motor you won't have to worry about coughing on all those dust particles. This belt sander comes with a dust bag that collects all that extra dust so it doesn't fly up in your face. You'll get your sanding done quickly and cleanly with this Ryobi sander.

• No-load speed of 820 FPM for more efficient sanding
• Powerful 6 amp motor for superior performance
• On/off trigger switch with lock-on for user convenience

User questions & answers

Question:	Can this be turned upside down and clamped to a work bench
Answer:	The connection is not a standard size so you may have to make or find an adapter.
Question:	What is the best belt sander to buy to sand paint from a concrete block in the garage wall
Answer:	I could not find a direct replacement, and have not used mine in awhile, but I plan on making something work. Because buying the replacement pads are pricey, and making mine/your own hook & loop is better. The main unit is good and work good. Just pads are the issue. Hope that helps
Question:	did it come in a case
Answer:	3 inch by 3 inch by 3 inch
Question:	Can you hook a shop vac to this belt sander
Answer:	That’s a big no!

Product description

This is a genuine Ryobi replacement part, it is sold individually. The platen is the part of the sander that you attach the hook and loop sandpaper to. To prolong the life of the platen try not to put to much pressure on the sander when sanding. Excessive pressure creates heat build up in the sanding pad which will quickly damage or even melt the tiny plastic hooks on the pad. Compatible With: - CFS1503K Corner Cat Sander - CFS1503 Sander - CFS1503G Corner Cat Sander

• Genuine OEM Replacement Parts
• Compatible with Ryobi Power Sanders
• Includes: - Backing Platens # 039065005001
• Interchangeable with 019001001017 / 019648001027 / CFS1501-02
• Fits P401, P400, CFS1503 Corner Cat Sanders

User questions & answers

Question:	Why is this item listed as prime, but will take 5 business days to recieve
Answer:	No. I just used the hardware from the previous backing. I'm sure you could find the correct sized screws at your local hardware store if not.
Question:	I ordered two of these and this does not fit my ryobi corner cat sander. it is slightly longer than my original. any suggestions
Answer:	I wouldn't know. The order never showed up !
Question:	Will this fit a tool shop detail sander
Answer:	Honestly, I've never tried but I'd be willing to bet this belt sander and the coarsest belt you can find would do the job.
Question:	does mounting hardware come with
Answer:	No. Just the tool

Product description

Larger construction projects require high volumes of wood to be sheared down to the proper size for uniform builds. A planer is the best tool to get them properly shorn. Rather than exhausting yourself with a hand planer, go with Ryobi. They have the HPL52K, a powerful 6 amp depth planer that can run up to 16,500 RPM. Simply plug its 6 foot cord into your wall outlet, attach the dust bag to whichever side you prefer, pull the trigger, and you’ll have cleanly shaved wood in no time. There are plenty of features on here that help you achieve the best experience. There is the rubber overmold that keeps friction high between your hands and the tool, allowing greater control in slippery environments. There is also a kickstand on the back of the unit the prevents it from marring your wood surfaces. It is also fully adjustable, letting you move the depth from 0 to 1/8" in 1/96” increments. With these features included in the HPL52K’s robust design, it’s no wonder that you’ll be working with Ryobi.

• ADJUSTABLE: Adjust your depth from 0-1/8" in 1/96” increments. This versatility will allow you to tackle a variety of woodworking projects with maximum precision
• GRIPZONE OVERMOLD: A rubber molding over the grip allows precise handling, even in slippery conditions
• SAFETY: A lock-off button prevents accidental activation, which saves you from ruining your work causing damage to equipment or yourself
• DUAL EXHAUST PORTS: There are ports on either side of the unit. You can choose which side to blow chips out of depending on which side you stand on the unit when working
• REAR MOUNTED KICKSTAND: This plastic piece on the back of the planer will prevent it from scuffing or otherwise marring your work surfaces

User questions & answers

Question:	what does this planer actually weigh? I can't find it on the Ryobi site. the reviews i've reviews I've seen put the weight at from 3.5 to 10 lbs
Answer:	Shipping weight is 7.75 pounds so~ 7 pounds
Question:	Can I attach my shop vac to this planer
Answer:	Yes I was able to attach a shop vac but I had to make an adapter for a Sears Shop Vac with a large diameter hose. If you have small diameter hose shop vac it may fit. Or just use duck tape.
Question:	does it work with 220V
Answer:	No, it does not. This model works only on 110V.
Question:	How wide will this planer cut?]
Answer:	3.25"