12 best planer thicknesser

Product description

**NEW** Replacement Rubber Belt Ryobi AP12 041002000 AP 12 Thicknesser Planer

• AP12 041002000 AP 12 Thicknesser Planer
• Best Deals By West Coast Resale

Product description

The Triton TPTPB is a pair of 12 1/2 inch (317mm) HSS replacement Planer blades.

From the Manufacturer

Established in 1976, Triton Precision Power Tools designs and manufactures a wide range of power tools primarily aimed at the expert woodworker. From award-winning, innovative routers, sanding products and circular saws, to the ground-breaking SuperJaws and the original Triton Workcentre, Triton has a history of innovative design, which is responsive to the needs of woodworking professionals and enthusiasts alike.

• Chrome-plated extension bars prevent corrosion
• Side support bracket supports wider work pieces
• Adjustable extension suits any sized work piece up to 23.6 inches (600mm) from the center line
• 23.6 inches (600mm) maximum side extension (from table center line)

User questions & answers

Question:	does it comes with the blades
Answer:	Yes it comes. With one set in it
Question:	What is the diameter of the dust port
Answer:	2 1/8 outside diameter. Fits shop vac hose nicely.
Question:	How many blades does this planer have? It’s odd that it wouldn’t be posted
Answer:	From what I found on Home Depot, it has 3 cutting blades.
Question:	How many amps is the motor
Answer:	1100 watts 1-1/2 HP 10 amps

Product features

Triton TPT125 Planer/Thicknesser

This workhorse of a planer offers 12-1/2" cutting width and a consistently smooth finish at 17,500 cuts per minute. Set precise depth cuts ranging from 1/8" up to 6" using the easy-to-read gauge. Large infeed and outfeed tables support big work pieces and the steel blades glide through material with ease. A built-in circuit breaker and dust chute ensure safe operation.

KEY SPECS

• Power: 1100W / 120V
• 17,500 cpm
• No Load Speed: 8750 rpm
• Cutting Width: 12-1/2"
• Cut Height Range: 1/8" to 6"
• Blade Type: HSS Blades
• Weighs 63.9 lbs

Versatile

• Vast Depth Range from 1/8" to 6" allows material removal for smoothing thin boards on up to larger timber.
• Broad 12-1/2" Cutting Width can match the scope of project you demand.
• Adaptable Dust Extraction Chute is positionable to the left or right for optimal set-up.

Performance Ready

• Powerful Precision generating 17,500 smooth cuts per minute.
• Generous Size Infeed & Outfeed Tables fully support the workpiece, even longer timber.
• Robust 4-Post Column Design for rigidity and accuracy in setting cut height.

Easy to Use

• Easy-To-Read Thickness Scale adjusts in 1/16" increments for precise workmanship.
• Graduated Depth Crank Handle makes setting the height of each cut a piece of cake.
• Straightforward Brush Changes won't slow you down.

Always Safe

• Built-in Circuit Breaker ensures additional electrical safety.
• Efficient Dust Extraction provides a cleaner, safer workshop.
• Locating Holes promise secure workbench positioning.

Product description

The DW734 12-1/2" Thickness Planer with Three Knife Cutter-Head is powered by a 15 Amp motor for managing large, deep cuts in hardwood. Three-knife cutter head with speed of 10,000 rpm provides 96 cuts per inch, delivering one of the finest finishes of any portable planer.

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.

12-1/2-Inch Thickness Planer with Three Knife Cutterhead At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm 96 cuts per inch for a fine finish Disposable, reversible steel knives are easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 12-1/2-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

Create custom stock with the thickness planer's 10,000 rpm three-knife cutterhead. View larger.

Versatile planer cuts a wide range of hardwoods. View larger.

Powerful 15 Amp Motor for Deep, Clean Cuts

Benchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.

This planer's powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.

Reversible, Disposable Knives for Convenience

The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Effective Dust and Debris Management

The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.

Large Capacity and Easy, Accurate Depth Adjustment

This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.

The DEWALT DW734 features extra-long feed tables for material support.

• Three-knife cutter head with 10,000 rpm cutter-head speed provides 96 cuts per inch, one of the finest finishes of any portable planer
• Disposable, reversible knives deliver 30% more knife life and make knife change fast and easy.
• Four-column carriage lock drastically reduces the movement that causes snipe
• Extra-long infeed and outfeed tables provide 33-1/2" of material support.
• Powerful 15 amp, 20,000 rpm motor handles larger, deeper cuts in hardwoods.
• Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
• Turret depth stop allows user to return to their most frequently used depths with ease

User questions & answers

Question:	Has anyone tried planning off paint on cedar with this machine? I have hundreds of feet to recycle
Answer:	yes. I've removed paint and finish with this.. not on cedar, but on mahogany and oak. However, do keep in mind that this will greatly impact the working life of the blades. But that's a small price to pay for such convenience. I say go for it. You'll love the result and it sure beats sanding or scraping with a card scraper.
Question:	Can the in-feed and out-feed rollers or carriage lock be adjusted to reduce snipe
Answer:	Make the last or final pass a very minimul cut depth ie. 1/64. This helps with snipe. The bigger the cut, the more snipe you will get. Make sure the material is support flat against the table as it begins the cut, and on the exit table as well. The pressure rollers tend to make the board 'tip' as it enters and exits (this is typical in any planer, even the big industrial ones found in mill houses). As far as waxing the tables, i much prefer to use a table top silicon type lube usually sold in spray cans at your local wood supply. These leave a non build moisture resistant film that will not only make the table very slick, but leave no waxy residue that can transfer to your lumber and cause finishing issues. Wax that transfers to your lumber can act as a release agent when applying typical lacquer base or poly type finishes. Last but not least, some snipe is considered acceptable from any planer. It's just the way it is. Always start with a board thats a few inches longer than finish length and plan on cutting off the ends. These little planers are better than most, but you can never plan on not haveing some snipe.
Question:	My first project with this will be planing 8"-10" wide Jatoba planks. How many linear feet can I expect to get out of one set of knives
Answer:	i really can not tell you , i still running my first set of knives and i have ran many hundred of feet thru , and they still run great we run oak, pine ,maple ,ash, walnut, beech , lot of oak &ash
Question:	are you happy with this purchase? or do you wish you got the 13" model with 2 speeds for $150 more
Answer:	I'm a hobbyist and have had the DW734 for about a year now. Most of my planning had been hardwoods, Maple, Cherry, Walnut and some Purple Heart. None of them have had complicated figure. The widest board I've run through the machine was about a 9" glue up. I've gotten very good results and virtually no tear out. For my purposes an extra 1/2" in width and 2 speeds wouldn't make any difference in my projects. For me, this was a great buy. Depending on your needs, your results may var :)

Product features

DEWALT DW734 12-1/2" Thickness Planer with Three Knife Cutter-Head

The DW734 12-1/2" Thickness Planer with Three Knife Cutter-Head is powered by a 15 Amp motor for managing large, deep cuts in hardwood. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Product description

15 Amp Benchtop thickness planer motor allows for superior stock removal as its 8, 000 RPM Cutter head speed provides 16, 000 cuts per minute. The two-knife, quick-change, solid steel cutter head assures smooth operation and long life. Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials.

• 15 amp benchtop thickness Planer motor allows for superior stock removal as its 8, 000 RPM cutter head speed provides 16, 000 cuts per minute. The two-knife, quick-change, solid steel cutter head assures smooth operation and long life. Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials.
• Hard and soft wood material removal: 15 amp motor provides power for both hard and soft wood material removal
• Maximum stock removal: Poly-V Cutterhead drive for maximum stock removal
• Smooth operation: Two knife, quick change, solid steel cutter, head mounted on ball bearings, assures smooth operation and long life
• Longer cutting life: high carbon steel, double edged, Reversible knives for cutting life

User questions & answers

Question:	What does the planer weigh
Answer:	Weight (lbs.) = 64.8
Question:	what blade does this product use
Answer:	High carbon steel, double edged, reversible knives
Question:	are the gears plastic or metal
Answer:	Metal
Question:	what width of board will fit
Answer:	2", 4", 6", 7", 8", 9", 10", 11" & 12"

Product features

Create Flat Surfaces with Ease

With the CRAFTSMAN Benchtop Planer, you will be able to experience a powerful 15Amp motor that is capable of handling the most demanding jobs. The four column design of this tool provides excellent stability for smooth, accurate planning.

Simple to Use

The CRAFTSMAN Benchtop Planer includes a two knife setup, quick change, solid steel cutter, head mounted on ball bearings and other features that assures smooth operation.

Support for Longer Working Life

Made with high carbon steel, this double edged tool comes with reversible knives for a longer cutting life.

Product description

13", heavy duty, portable 2 speed thickness planer.

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Powerful 15 Amp Motor for Clean Cuts

Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience

The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment

This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management

The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

From the Manufacturer

The DW735 13-inch thickness planer from DeWalt provides best in class surface finish through a one of a kind three knife cutter-head--even in hard to plane figured woods. At 96 or 179 cuts per inch, the DW735 offers the finist finish via the most cuts per inch available on a benchtop thickness planer. A fan-assisted chip ejection system aids in the removal of debris and prevents excess chips from marring your material. The unique automatic carriage lock minimizes the movement that causes snipe without engaging a lever before and after each pass. A solid 19-3/4-inch cast aluminum base provides twice the rigidity of traditional material support systems that utilize folding tables. The DW735 is a must for the serious woodworker.

FEATURES

• Powerful 15.0 Amp, 10,000 rpm motor handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
• 19-3/4-inch cast aluminum base is 2X more rigid than a standard 10-inch base and folding tables
• Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
• Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
• Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease

SPECIFICATIONS

• Amps: 15.0
• No Load Speed: 10,000 rpm
• Max. Depth of Cut: 1/8-inch
• Depth Capacity: 6-inch
• Width Capacity: 13-inch
• Tool Weight: 92 pounds
• Shipping Weight: 100 pounds

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

User questions & answers

Question:	What is the table thickness (or height from the bottom to the table top
Answer:	from the bottom of the planer stand to the top of the planer intake is 2 1/2 inches. Our planer is also mounted on a plate to the stand so that adds additional height too. The table is 2 inches thick at the intake.
Question:	hello I wonder if they are including taxes and shipping to Mexico are included
Answer:	Currently we do not ship to Mexico.
Question:	What is snipe
Answer:	A snipe occurs within the first 2" on the infeed and outfeed of the wood. The blade may cut deeper when a snipe occurs.
Question:	Is this made in the USA
Answer:	Dewalt features a large “made in the USA” or “assembled in the USA” branding on most of not all their products that are manufactured or assembled stateside.

Product description

13IN PLANER W/EXTRA KNIVES AND TABLES, Made in: Taiwan, Dimensions: 21.75 X 24.25 X 22. Weight: 102 The DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer has a powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) that handles larger cuts in wider materials with ease. The three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier. The two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. It has a fan-assisted chip ejection that vacuums chips off of the cutter-head and exhausts them out of the machine. With a 19-3/4" cast aluminum base it is 2X more rigid than a standard 10" base and folding tables. The automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user. It also has a material removal gauge and extra-large thickness scale that deliver accurate cuts with every pass. The extra-large turret depth stop allows users to return to most frequently used thicknesses with ease. Includes infeed and outfeed tables and an extra set of knives.

From the Manufacturer

The DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer has a powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) that handles larger cuts in wider materials with ease. The three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier. The two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. It has a fan-assisted chip ejection that vacuums chips off of the cutter-head and exhausts them out of the machine. With a 19-3/4" cast aluminum base it is 2X more rigid than a standard 10" base and folding tables. The automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user. It also has a material removal gauge and extra-large thickness scale that deliver accurate cuts with every pass. The extra-large turret depth stop allows users to return to most frequently used thicknesses with ease. Includes infeed and outfeed tables and an extra set of knives.

• Your purchase includes One Stationary 13" Planer, in/out feed tables, extra blades and dust hose adapter. Stand is not included.
• Planer dimensions: 24” L x 22” W x 18” H. Depth capacity: 6-Inch. Max depth cut: 1/8-Inch. Width capacity: 13-Inch. Tool weight: 92 pound
• Specifications: Made for 110V, not convertible to 220V. Includes automatic carriage lock that reduces the movements and snipes. Not compatible with Wi-Fi or Bluetooth
• Two-speed gearbox allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Compatible with DW735 13", DW735X 13"

User questions & answers

Question:	Is this machine the same as the 735 w/o the extra blades and infeed and outfeed tables
Answer:	Yes it is the same as the standard 735. As to the ware on the blades - I've planed over 300bf in the 6 years that I've had this unit. I missed a label staple on the end of a board and now have a 1/32nd hairline strip that shows and I easily clean up with a scraper. I also purchased an extra set of HSS (high speed steel) knives and put the money out ($158 for the set) for carbide edged which I only use on the last phase of the construction. I've got an older 13" planer that I use strictly for rough plane jobs and paint and varnish removal when I recycle older woodwork.
Question:	How much thickness does this take, when used just for finishing? i have ok smooth oak in 13/16", would like it ++smooth but can't give more than
Answer:	You can take as little or as much off as you want. It is measurable down to about 1/64" but if there is any cupping or warping within the board that may vary a bit. I would recommend a random orbital sander going up to 320 grit to get a ++smooth surface
Question:	How easy is it to change blades on this planer? Thanks
Answer:	Easy, about 10-15 minutes: 1) Remove four 5/32nds" headed screws to remove the top yellow cowling. 2) Remove 3 red thumbscrews to remove the black dust shroud - clean out any blocked wood chips. 3) Remove eight 5/32nds" headed screws on each of the three blades. 4) Flip the blades, or sharpen if they've already been flipped. 5) Reassemble in the reverse order. If using a power drill with a 5/32nd inch allen wrench head (e.g., https://smile.amazon.com/gp/product/B07VH7ZQGC or something similar), set the drill on medium torque and it will take about 10 minutes. (If you manually unscrew the screws using the T handled allen wrench it will take twice as long.) If careful (having heard of the others stories), it doesn't seem hard to to remove/replace the screws with enough torque to seat them properly, but not so hard that they get struck. I'm planing very hard madrone wood, and the blades have lasted about 150-200 lineal feet of wood that is about a foot wide before needing replacing. Use the #1 (slow) feed speed for hard woods - I didn't know about this until reading the manual...
Question:	Does this planer have a 2.5" or 4" dust ejector port? Thanks
Answer:	It has a 2.5" port with a 4" adapter. Follow the useful advice from the other folks, use the 4" adapter with a 4" hose/duct. Cheers 🥃

Product description

The PORTER-CABLE PC305TP 12" thickness planer has a powerful 15 amp motor allowing for superior stock removal as its 8, 000 RPM Cutter head speed provides 16, 000 cuts per minute. The two-knife, quick-change, solid steel Cutter head assures smooth operation and long life. Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials.

• 8,000 RPM cutter head speed powers 16,000 cuts per minute with a fast 26.2 Ft/Min self-feeding rate
• Powerful 120V single phase 15 amp motor for superior stock removal
• Two knife, quick change, solid steel cutter, head mounted on ball bearings, assures smooth operation and long life
• High carbon steel, double edged, reversible knives for twice the cutting life
• Patented cutter elevation on four precision ground columns for superior cut stability
• Poly V belt cutter head drive with rugged gearbox/chain and sprocket feed roller drive for maximum power transfer

User questions & answers

Question:	Can a Shellix cutterhead be installed on this unit
Answer:	We have not tested the Shellix with this model. Therefor, we cannot recommend it.
Question:	I want to know if this machine have two blades
Answer:	what is the blades for 2017 50-ho 105624 serial number
Question:	where is it made
Answer:	Manufactured in China.
Question:	I live in Bulgaria and our electrical supply is 220 Volt, can I work with this here
Answer:	Yes you can. I have taken quite a few 120 volt appliances to Europe and used a transformer to step up the voltage. Voltage is NOT the concern. Europeans use 50 cycle AC. In the US we use 60. So motors will run a bit slower but they will work. Conversely, if you bring a European motor appliance to the US, they will run faster and probably burn out the motor.

Product features

PORTER-CABLE PC305TP

• Powerful 15 Amp motor for superior stock removal
• Two knife, quick change, solid steel cutter, head mounted on ball bearings, assures smooth operation and long life
• High Carbon Steel, double edged, reversible knives for twice the cutting life
• Patented cutter elevation on four precision ground columns for superior cut stability
• Poly V Belt cutter head drive with rugged gearbox/chain and sprocket feed roller drive for maximum power transfer

Product description

Remember when you brought those old jagged boards back to life. The WEN 13 in. 3-Blade Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15 Amp motor provides over 25,500 cuts per minute at a 26 ft. per minute feed rate. Plane boards up to 13 in. W and 6 in. T with ease. The onboard planning gage helps inform users about the amount of material being removed during each pass. Combine that with the heavy-duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob varies each pass to take off anywhere from 0 in. to 3/32 in. of an inch. The fan-assisted dust port removes chips and sawdust from the workpiece and blasts them out of the way. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planning. Easily mount the planer to a work surface or stand using the predrilled base holes. Repurpose old wood or make a set of boards flush with the WEN 13 in. 3-Blade Benchtop Thickness Planer. And because its a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.

• Onboard material removal gauge informs users about the cutting depth of each pass
• Plane boards up to 6 in. T and 13 in. W
• 15 Amp motor generates 25,500 cuts per minute at a 26 ft. per minute feed rate
• 3-blade design makes easy work out of even the hardest of woods
• Fan-assisted dust port removes sawdust from workpiece

User questions & answers

Question:	how much tax money we have to pay ? @ how much money the shipping will cost
Answer:	if you have amazon prime shipping is usually free on items like this. i think you pay tax at the rate of where its coming from but you need to do further checking on that.
Question:	How thin can I plane a piece of wood down to with this planer
Answer:	Down to 1/8” is possible. Working down in very shallow increments. A little less than 1/8” if you run the wood through planer attached to an auxiliary scrap piece of wood. A piece of plywood maybe .
Question:	What is the size of infeed/outfeed table
Answer:	Table Size 13-1/4 in. x 9-1/2 in. https://m.media-amazon.com/images/I/C17Wys9ylFS.pdf
Question:	Does this planer have a standard 110 plug
Answer:	YES, it is a standard 3-prong 110 plug.

Product features

Tri-Roller Feeding System & Reversible Blades

The WEN Thickness Planer uses a tri-roller feeding system to help minimize snipe. The three dual-edged blades on the middle roller can be reversed to help elongate their life cycle and ensure sharp cuts.

Fine-Tune Depth Adjustments

Easily adjust the height of your planer with the comfortable rubber-grip adjustment handle. Each quarter rotation adjusts the height of the cutter head 1/64 of an inch for maximum precision during operation.

Infeed and Outfeed Tables

Foldable infeed and outfeed tables add support to longer workpieces traveling through the planer. Both tables can be adjusted to get the perfect angle for smoothly feeding boards for smoothly feeding boards and fighting snipe.

Dust Hose Connection Port

Attach a dust extraction device or a wet/dry vac to the handy 2 inch, 2-1/2 inch, or 4 inch fan-assisted dust port adapter to minimize cleanup. Keep all of the sawdust and shavings in one place instead of all over the workshop floor.

Product description

PRODUCT DESCRIPTION

 

Introducing the 8 Amp Portable Hand Planer by POWERTEC.

 

This heavy duty hand planer was designed to deliver power, precision and professional looking results.  Compared to similar priced planers, you’ll be absolutely amazed with the amount of power and control that the 8-amp motor delivers.  Equipped with two high quality blade cutters, the unit can plane up to 4-3/8 inches wide with a 16,000 rpm for smooth material removal, and can deliver 32,000 cuts per minute for project workflow and efficiency. 

 

The POWERTEC hand planer has a double-sided dust extraction port that allows for project flexibility, depending on which side (left or right) of your work area you need to keep clean – free of sawdust and debris.  The dust extraction adapter is included, and accommodates most popular dust hoses.  The adjustable depth knob offers a 16 positive step setting that gives you more control and a variety of depth options.  The two front facing chamfering grooves are V-shaped and are excellent options for optimal edging.  A tool park rest has been added for additional safety and protection, helping to prevent any unintentional blade-to-workpiece contact during down time.

 

Contents Included

8 Amp Power Planer with Blades

Universal Dust Extraction Adapter

Rabbet Planer Guide

Parallel Fence Bracket

 

POWERTEC is a US based manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• INCLUDES: 8 amp 4-3/8 in. Corded Hand Planer, Dust Extraction Attachment, Rabbet Planer Guide, and a Parallel Fence Bracket
• FEATURES: A powerful 8 amp motor for increased control, superior planer action that delivers up to 32,000 cuts per minute, and two V-shaped grooves for additional edge chamfering
• PREMIUM EDITION: This power hand planer possesses a smooth, portable and lightweight design with an ergonomic grip for easy handling and optimal comfort
• DUAL ACTION: Possesses a double-sided dust extraction port that ejects chips and sawdust on either side (L or R) to accommodate your specific requirements of the woodworking project at hand
• ADJUSTABLE DEPTH: Knob with 16 positive stop setting

User questions & answers

Question:	Can you get replacement blades
Answer:	Here is the link. https://www.amazon.com/dp/B01GZI9CIG?ref_=dpLink&th=1 to order the replacement blades.
Question:	in the blades received it says hand held planner. does it mean hand push or attached to hand held power planer
Answer:	The blades are for a handheld power planer
Question:	i am confused here. name says it is tungsten carbide and Technical specification - Material says - High speed steel. what is the correct material
Answer:	It’s carbide for a high speed planning
Question:	Will these fit a WEN
Answer:	yes if it's 4- 3/8"

Product features

ADJUSTABLE DEPTH

Adjustable depth knob offers a 16 positive step setting that gives you more control and a variety of depth options.

DUAL ACTION

Possesses a double-sided dust extraction port that ejects chips and sawdust on either side (L or R) to accommodate your specific requirements.

FEATURES

A powerful 8 amp motor for increased control, superior planer action that delivers up to 32,000 cuts per minute, and two V-shaped grooves for additional edge chamfering.

Product description

Makita 2012NB Specifications:Cutting Capacity Width 12", Depth 1/8", Thickness 6-3/32" No. of knives 2 Table Size (WxL) 13" x 30-3/8" No Load RPM 8500 Makita 2012NB Includes:Planer blade set (793346-8)2 ea. Magnetic Holder (762014-4)Socket wrench (782203-5)Hex wrench (783208-8)Key (415715-0)Detachable tool boxMakita 2012NB Features:Compact and lightweight for easy transporting to the job-siteFastest and easiest blade change system on the market; uses disposible double edge bladesQuietest (83dB) planer in its class4-post design and diagonal cross supports for stabilityLarge table extensions to support the workpieceFully adjustable depth stop for repeat cutsLED light indicates that the planer is plugged into the power sourceLarge and easy to operate paddle on/off switchDisposable double edge planer bladesEasily adjustable cutting depth for precision planingDetachable tool box for storage of the standard equipmentOptional dust hood enables dust collection system to be connected to planer

The Makita 12-Inch Portable Planer delivers portability and productivity with a compact design, quieter operation, and faster, easier blade changes. The 2012NB features Makita's exclusive Interna-Lok automated head clamp to eliminate snipe for improved planning performance.

• Compact with less weight for easy transporting to the jobsite
• Engineered for faster, easier blade changes
• Low noise (83dB) for operator comfort
• 4-post design and diagonal cross supports for stability
• Large table extensions to support the workpiece
• Fully adjustable depth stop for repeat cuts
• L.E.D. light indicates that the planer is plugged into the power source

User questions & answers

Question:	What is the thinnest that you can plane a board to with the Makita planner
Answer:	Dear Customer, This folding cot weighs 11.9 pounds. In deed, it is a good weight for longer ourdoor trips! Thank you for your interest and we wish to be your reliable outdoor partner. Best wishes, Ever Advanced Team
Question:	Does it snipe
Answer:	Dear Aletheia, We do not sell individual parts due to lack of demand. However, we have a strong customer support team. Please contact us via Email Seller or or store front email, with your order number on it. Our friendly customer service team will be help to work out a solution with you! Sincerely, EVER ADVANCED US Team
Question:	I am considering the purchase of this or steel city 40200h . Any comments on the mikata good or bad
Answer:	Dear Customer, Thanking for visiting our store.The weight capacity is 250 pounds so it can't support your weight. Please feel free to contact us if you have any other question. Best Regards, EVER ADVANCED
Question:	what is the shortest piece of wood you can plane
Answer:	I order The universal cot and the pad specifacly for it, =85 x 32 x 19 inches vs. the xxl. It's true to size.

Product description

PORTER-CABLE® PC160JT variable speed 6" jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in Cutter head Lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
• Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
• Built-in cutter head lock facilitates knife replacement and adjustment
• Extra large table provides ample work support and Surfacing stock up to a full 6" wide
• Center mounted fence gives needed support throughout the cut for accurate edge jointing

User questions & answers

Question:	Can this jointer be attached to a 2 1/2 vac
Answer:	yes with a reducing adapter on your 2 1/2 vac
Question:	What is the recommended maximum board length that should be used with this jointer
Answer:	Maximum board length will depend on the strength of the operator and if/how well the jointer is anchored. I would think 8’ would be doable by most. Comes down to how well you can hold the workpiece down flat on roughly 16” of table before the blade.
Question:	What is the difference betwee the pc160jt and the pc160jtr
Answer:	Hello Kimberly, there is no difference. The actual model number is PC160JT. The JTR is a typo on Amazon. Porter Cable does not make a PC160JTR. Best Wishes!Tomboysupply.com
Question:	What material are the fence and table made out of
Answer:	I am 99% certan that the tables are cast aluminum, and the fence is aluminum. The weight, color and feel make this pretty evident. If it were cast iron it would weigh twice as much and be prone to rust. This jointer is as good functionally as any other. But because of its light weight it must be secured to a stable heavy base. It also needs a bit more tuning than other models. But if you are going to own any precision tools that is something you should become capable of.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, these jointers are extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with a good quality jointer at your workshop.

Flatten and Square the Face of the Board

As a jointer allows you to make one straight surface and one flat surface, you will be able to shape and size wood according to accurate measurements. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. You will be able to select the right speed fir the hardness and size of the material that you are using to cut. The extra-long table and center mounted fence also provides ample work support for an accurate cut.

Your Best Buddy for Cabinet Resizing

If you are enthusiastic about redoing your kitchen, you will adore a jointer. A handy tool for fitting doors and cabinets, you will be able to show off your creativity with a good piece of art. As a jointer’s versatility depends on the user, you will be able to get better at the handling with every use of this tool.

Product description

Introducing the Benchtop Thickness Planer by POWERTEC.This powerful planer is specifically designed to repurpose and bring your old, worn out wood back to life. A powerful 15 amp motor enables it to take on a wide range of big and small woodworking projects. It flaunts a 2 blade cutting system with a precision steel cutter head (with lock) that generates 18,800 cuts per minute providing you with a quick and efficient wood planer tool. From building a work bench to bed frame, this workhorse excels at delivering a flawless finish. For additional convenience and versatility, this device features side mounted carrying handles, allowing you to take this portable planer wherever it is needed.INCLUDES:EZ Blade Replacement with index pin set up (Blade gauge not required).Spindle lock for safe blade change.Professional work piece roller assistance for extra long boards.4 column design provides greater precision and stability while reducing snipe.1-year limited manufacturer warranty.Please Note: This thickness planer does not include a build in dust port; but you can order your dust collector port on Amazon by searching for POWERTEC Dust port and Screw Set or part #PL1251DPSAdditional Specs:Universal Motor 120V, 60 hz, 2 horsepower (peak)Cutter Head Speed 9400 RPMMax. Width of stock 12-1/2"Max. Thickness of stock - 6"Max. Depth of cut - 3/32" for board less than 5" 1/32" for the board between 5" to 12-1/2"POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, measurement equipment, hand tools, and an assortment of OEM replacement parts. They are committed to exceeding expectations, while bringing the latest innovation, technology, and product development to the industry.

• FUNCTION: This portable thickness planer serves as an essential tool and workhorse for a wide range of professional and DIY woodworking projects – specifically designed to repurpose wood (old, weathered and worn wood), while giving it an extraordinarily smooth finish
• EFFECTIVE: Has a heavy duty, anti-wobble base that’s ultra sturdy – providing a non-marring benchtop planer surface that will support an assortment of plane boards up to 12.5” wide and 6” thick
• POWERFUL: Combines an impressive 15 amp motor with an innovative 2 blade cutting system that delivers deep cuts into your hard woods (raw oak, pallet wood, walnut lumber) and more
• QUICK: A stainless steel precision cutter head allows this planer to deliver over 18,800 cuts per minute with a 9,400 RPM
• PRODUCT WARRANTY: Includes a 1 year limited manufacturer warranty for quality assurance

User questions & answers

Question:	Where is it made
Answer:	WAUKEGAN, ILLINOIS
Question:	Does this planer come with a dust collection attachment
Answer:	no, but the dust collection hood is also available from amazon!
Question:	My Powertec planer locked up while planing. Does anyone know how to unlock the blades
Answer:	It comes with an wrench to undo the screws that lock it down
Question:	replacement blades
Answer:	Please check the replacement blades in the product link below. https://www.amazon.com/dp/B005NYX3B6