12 best benchtop jointers

Product description

PORTER-CABLE® PC160JT variable speed 6" jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in Cutter head Lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
• Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
• Built-in cutter head lock facilitates knife replacement and adjustment
• Extra large table provides ample work support and Surfacing stock up to a full 6" wide
• Center mounted fence gives needed support throughout the cut for accurate edge jointing

User questions & answers

Question:	Can this jointer be attached to a 2 1/2 vac
Answer:	yes with a reducing adapter on your 2 1/2 vac
Question:	What is the recommended maximum board length that should be used with this jointer
Answer:	Maximum board length will depend on the strength of the operator and if/how well the jointer is anchored. I would think 8’ would be doable by most. Comes down to how well you can hold the workpiece down flat on roughly 16” of table before the blade.
Question:	What is the difference betwee the pc160jt and the pc160jtr
Answer:	Hello Kimberly, there is no difference. The actual model number is PC160JT. The JTR is a typo on Amazon. Porter Cable does not make a PC160JTR. Best Wishes!Tomboysupply.com
Question:	What material are the fence and table made out of
Answer:	I am 99% certan that the tables are cast aluminum, and the fence is aluminum. The weight, color and feel make this pretty evident. If it were cast iron it would weigh twice as much and be prone to rust. This jointer is as good functionally as any other. But because of its light weight it must be secured to a stable heavy base. It also needs a bit more tuning than other models. But if you are going to own any precision tools that is something you should become capable of.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, these jointers are extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with a good quality jointer at your workshop.

Flatten and Square the Face of the Board

As a jointer allows you to make one straight surface and one flat surface, you will be able to shape and size wood according to accurate measurements. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. You will be able to select the right speed fir the hardness and size of the material that you are using to cut. The extra-long table and center mounted fence also provides ample work support for an accurate cut.

Your Best Buddy for Cabinet Resizing

If you are enthusiastic about redoing your kitchen, you will adore a jointer. A handy tool for fitting doors and cabinets, you will be able to show off your creativity with a good piece of art. As a jointer’s versatility depends on the user, you will be able to get better at the handling with every use of this tool.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our powerful 10-amp motor combined with the two-blade 6-1/8 inch cutterhead provides up to 20,000 cuts per minute, making easy work out of even the hardest of woods. Adjust the infeed table to take cuts anywhere from 0 to 1/8 inches deep. The onboard scale makes for easy adjustments to the depth of cut for maximum accuracy before each pass. The spacious table measures in at 6-1/4 x 28-1/2 inches for large or uniquely-shaped workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, exposing the cutterhead only during jointing operation. This package also features an onboard dust port, a push stick, a push block, and a filter bag for minimal cleanup. And, because its a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch cutterhead
• 10-amp motor provides up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch in size
• Onboard depth scale makes for easy adjustments to the depth of cut
• Adjustable 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, a dust filter bag, and a two-year warranty

User questions & answers

Question:	Two questions, [1. Is it easy to change blades? [2. Can the blades be purchased via Amazon
Answer:	These are 1/2 inch shank
Question:	Does it come in 230 v version
Answer:	Yes, it comes with a micro usb to ac adapter and charger, thank you!
Question:	Can it be used to plane wood as well as joint
Answer:	If you have WiFi!
Question:	Description says "Onboard depth scale" but I cant't see it in any of the images. I can see the knob to adjust the depth but where is the scale
Answer:	It comes with the charger.

Product description

10 Amp Benchtop jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
• Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
• Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
• Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
• Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods

User questions & answers

Question:	What are the dimensions of the Jointer itself, not the package dimensions
Answer:	The saw can easily cut the full width of a 12" board when making a 90 degree straight or bevel cut. Angle cuts will reduce the maximum span of the cut.
Question:	How long is it from end to end of the in- and out-feed tables
Answer:	No.but I am surprised at the quality for the price.
Question:	how much does it weigh
Answer:	Maximum speed (rpm) 5000 RPM Arbor size 5/8 in. According to the tech specs in the description
Question:	how wide is the cut
Answer:	In theory it should be able to cut boards up to 12" wide, however the quality was so poor, it was literally falling apart out of the box and I never powered it up and returned it out of safety concerns.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with this jointer at your workshop.

Flatten and Square the Face of the Board

The CRAFTSMAN CMEW020 10 Amp Benchtop Jointer holds a heavy duty 10 amp motor provides power for hard and soft woods. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. Ideal for edging, flattening, or face jointing the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is also portable.

Product description

13", heavy duty, portable 2 speed thickness planer.

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Powerful 15 Amp Motor for Clean Cuts

Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience

The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment

This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management

The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

From the Manufacturer

The DW735 13-inch thickness planer from DeWalt provides best in class surface finish through a one of a kind three knife cutter-head--even in hard to plane figured woods. At 96 or 179 cuts per inch, the DW735 offers the finist finish via the most cuts per inch available on a benchtop thickness planer. A fan-assisted chip ejection system aids in the removal of debris and prevents excess chips from marring your material. The unique automatic carriage lock minimizes the movement that causes snipe without engaging a lever before and after each pass. A solid 19-3/4-inch cast aluminum base provides twice the rigidity of traditional material support systems that utilize folding tables. The DW735 is a must for the serious woodworker.

FEATURES

• Powerful 15.0 Amp, 10,000 rpm motor handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
• 19-3/4-inch cast aluminum base is 2X more rigid than a standard 10-inch base and folding tables
• Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
• Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
• Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease

SPECIFICATIONS

• Amps: 15.0
• No Load Speed: 10,000 rpm
• Max. Depth of Cut: 1/8-inch
• Depth Capacity: 6-inch
• Width Capacity: 13-inch
• Tool Weight: 92 pounds
• Shipping Weight: 100 pounds

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

User questions & answers

Question:	What is the table thickness (or height from the bottom to the table top
Answer:	from the bottom of the planer stand to the top of the planer intake is 2 1/2 inches. Our planer is also mounted on a plate to the stand so that adds additional height too. The table is 2 inches thick at the intake.
Question:	hello I wonder if they are including taxes and shipping to Mexico are included
Answer:	Currently we do not ship to Mexico.
Question:	What is snipe
Answer:	A snipe occurs within the first 2" on the infeed and outfeed of the wood. The blade may cut deeper when a snipe occurs.
Question:	Is this made in the USA
Answer:	Dewalt features a large “made in the USA” or “assembled in the USA” branding on most of not all their products that are manufactured or assembled stateside.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our powerful 10-amp motor combined with the two-blade 6-1/8-inch cutterhead provides up to 20,000 cuts per minute, making easy work out of even the hardest of woods. Adjust the infeed table to take cuts anywhere from 0 to 1/8-inch deep. The spacious table measures in at 6-1/4 x 28-1/2 inches for large or uniquely-shaped workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing the cutterhead during jointing operation. This package also features an onboard dust port, a push stick, a push block, and a filter bag for minimal cleanup. And, because it's a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line all to make sure you remember WEN.

• Heavy duty cast iron table provides a reliable and sturdy jointing surface for your workpieces
• Features a spacious 6-1/4 x 28-1/2-inch table and a 2-blade 6-1/8-inch cutterhead
• 10-amp motor generates up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch
• Adjustable 20-3/4 by 4-1/2-inch cast iron fence bevels up to 45 in. either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, and a dust filter bag

User questions & answers

Question:	Cuánto pesa
Answer:	2 speeds only
Question:	How do you guys like it? Better than the steel version, worth the price? Maybe go a different/better brand for same price but not the cast iron
Answer:	China
Question:	How much does it weigh and how long is the table
Answer:	Made in China.
Question:	How do I know what is the cut depth
Answer:	I suggest you to check the list of compatible batteries in the user manual attached in the product page.

Product features

WEN JT6561 10-Amp 6-Inch Corded Benchtop Jointer with Cast Iron Base

Maximize precision with the WEN 6-Inch Benchtop Jointer. Our powerful 10-amp motor combined with the two-blade 6-1/8-inch cutterhead provides up to 20,000 cuts per minute, making easy work out of even the hardest of woods. Adjust the infeed table to take cuts anywhere from 0 to 1/8-inch deep. The spacious table measures in at 6-1/4 x 28-1/2 inches for large or uniquely-shaped workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing the cutterhead during jointing operation. This package also features an onboard dust port, a push stick, a push block, and a filter bag for minimal cleanup.

Features

• Heavy duty cast iron base and tabletop prevent wobbling and walking during operation
• Features a spacious 6-1/4 x 28-1/2-inch table and a 2-blade 6-1/8-inch cutterhead
• 10-amp motor generates up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch
• Adjustable 20-3/4 by 4-1/2-inch cast iron fence bevels up to 45 degrees in either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, and a dust filter bag

Product description

6" Benchtop Jointer #20-600H has a 6 row helical-style cutter head with 12 HSS, 2-edge insert cutters for super cutting action, flat surfacing results and easy knife changes. Features rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90° to 45° quickly and accurately, spring-loaded safety guard, 2-1/2" dust port, front safety on/off switch and two push blocks.

• RIKON BENCHTOP JOINTER - This 6” becnhtop jointer has a 6 row helical-style cutter head with 12 HSS, 2-insert cutters for super cutting action.
• HIGH SPEED - With a powerful 10 AMP motor, this benchtop jointer also features a high speed steel insert knives and a large 30” x6-3/16” table.
• ALL STEEL CONSTRUCTION - Made from rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90 degrees to 45 degrees quickly and accurately.
• SEE RESULTS - This benchtop jointer also has a spring loaded safety guard and a front on/off switch. You will see results when using this benchtop jointer.

Product description

Precise, Durable, Adjustable Power Tool for Every Woodworker

Experience smooth, cutting precision that makes prep work even more convenient with Wahuda Tools Jointers. Flatten edges and create two perfectly square surfaces with ease using a stable and powerful benchtop jointer that comes in 6, 8, and 10-inch size options, all of which are designed to be easily maneuvered around your shop or job site. Wahuda Jointers comes equipped with a cast iron table for maximum stability during operation while ensuring a more scratch-free working surface. Adjusting your work area is uniquely simple, too, thanks to pre-installed set screws that make leveling hassle-free.

Built To Smooth All Types of Wood Surfaces

Unlike the traditional straight knives, our new Spiral Style Cutterhead enhances cutting-edge sharpness while reducing the need for blade maintenance. With four sides of carbide insert tips, get smoother cuts and smaller shavings from blades that stay sharp for longer. They’re also incredibly easy to replace. Simply loosen the insert, rotate to the next edge, and tighten the insert back into place. The spiral design also cuts quieter while minimizing disruption from nicks and tear-outs.

Designed For Beginners To Expert Woodworkers

Whether you are a budget-minded novice or an experienced woodworker, Wahuda Jointers are created to help you perfectly prepare your stock for the next step. With ample machining power to handle various woodworking tasks, such as squaring, tapering, and trimming, you can complete your projects with ease and efficiency. Make Wahuda Tools your woodworking partner and craft your next masterpiece.

• No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
• Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
• Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
• Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135​° for ​versatility.
• Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too!

User questions & answers

Question:	are the blades (carbide tips square to the table or are they angled so they shear the wood rather than cut in a cupping action
Answer:	There are 12 included bits inside the screwdriver cartridge that you can swap between. You can also fit any bit of your choosing into the 1/4 in chuck. Thanks for the question!
Question:	Wahuda website says the 6” jointer is 30.5” overall length. Amazon says it is 34”, and a question here says 33 7/8”. Which is it
Answer:	No, on a couple of levels: This device is powered by an internal rechargeable battery. On the bottom of the grip, there is a micro-sub port, similar to what you would see on your average Android cell phone or many blue-tooth headsets. You charge the screwdriver through this sub port. The voltage for us ports is 5 volts. The product ships with a ac-to-usb adapter. That adapter only accepts 110-120volts You can buy international travel power adapters that will accept 220volts and provide usb charging
Question:	Where is it manufactured
Answer:	Not sure, but this one sucked
Question:	Why is this jointer $50 cheaper on their website? It’s $549 with free shipping to the lower
Answer:	Just snug it up with the impact and be sure to use the lowest setting, then use the torque wrench to complete the tightening process.

Product description

Durable cast iron construction increases weight providing stability and reducing vibration

• Durable cast iron construction increases weight providing stability and reducing vibration
• Precision-machining of the table and fence ensures long term accuracy
• Heavy duty, cast iron fence support system for accurate jointing
• Simple fence adjust system with adjustable positive stops at 90˚ and 45˚ in and out
• Up to 1/8" depth of cut and 20, 000 cuts per minute

User questions & answers

Question:	is it possable to extend the table
Answer:	yes, they are lithium ion batteries
Question:	Great for bedrooms ? I dont get it people do woodworking in the bedroom now
Answer:	What I found that sometimes when I barely turned the drill to start the drill was not enough and when I turned it a little further for more torque... The drill would some times spin out the screw head slot. This was more my fault because I should have looked at the choke setting on the chuck to adjust it to a lower setting. I found to loosen a screw was that first...make sure that the screw tip is the correct size for screw head slot. Next with the bit in the drill chuck, put the bit in the screw slot. Then WITHOUT turning on the drill, turn the screw manually to break the tightened connection. Then with the drill chuck choke adjustment mid way or low setting would easily loosen the screw slowly when I wanted to loosen slowly. Plus this saved some time and battery on multiple connections. To tighten I had to remember to set the choke setting low and it would tighten and then the choke action would (rattle). Then I could increase the choke setting 1-2 steps to ensure the screw terminal was tight. I hope I this helps.
Question:	Why is it over 100.00 more than Lowes or Homedepot
Answer:	Definitely does the job on softer woods (e.g., basic 2x4s). I have been using it on all my shelving projects - mostly using #9 2-1/2" desk screws . The ability to change directions (in/out) makes it great for pre-drilling with a quick release drill bit without having to touch anything but the trigger. I am also impressed by the amount of torque this can generate, and the amazing battery life - really a great tool.
Question:	The "fence angle lock" bar cannot be locked into place to secure the fence, because it cannot be turned. The handle hits the fence. How is this done
Answer:	Does not come with a case.

Product features

Delta 6-" Midi-Bench Jointer

The 6" Jointer by Delta Machinery will perform clean, precise cuts every time. A heavy duty cast iron fence provides accurate jointing. With a precision-machined table and fence you’ll get to experience long lasting accuracy. Cut up to a maximum width of 6" and enjoy up to 1/8" depth of cut.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 8-Inch Spiral Benchtop Jointer. Our spiral cutterhead utilizes 16 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10-amp motor rotates the cutterhead up to 12,000 times per minute. Adjust the infeed table to remove 0 to 1/8-inch of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 33 by 8 inches with support arms that extend up to 51 inches for longer workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes two push blocks for safer jointing and an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because it's a WEN product, the WEN 8-Inch Benchtop Jointer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish
• Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches
• Remove 0 to 1/8 of an inch of material with each pass
• Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
• Includes an onboard depth-of-cut scale, two push blocks, 2-1/2 and 4-inch dust ports, and a two-year warranty

Product description

The new Jet 6 in. Benchtop jointer provides a smooth and consistent cut surface thanks to its use of 14 carbide tipped helical head blades. Heavy duty cast iron tables and fully adjustable fence make for a premium cutting experience. Features include a fully adjustable cast iron fence, internal dust collection system and safety black and push stick. Powerful 1 HP 15 Amp motor turns the cutter head at 10000 RPM Highly visible scale for accurate depth of cut adjustments Front mounted toggle switch with removable safety key 6 in. jointing capacity in small footprint Large dust collection bag with quick empty zipper Includes: JJ-6HHBT 6 in. Benchtop Jointer - 718600.

• True helical cut with 14 indexable four-sided carbide blades
• Heavy duty cast iron tables
• Large cast iron fence
• Fully adjustable fence with locking stops at +/- 45-Degree tilt dual-direction for beveling
• Internal blower motor moves dust and chips away from motor and cutter head

Product description

This is a lot of jointer in a small-package. It features a spiral-style cutterhead with indexable carbide inserts, knob-adjustable infeed table with lock for ultra-precision cutting depth adjustments, an in. and metric cut depth indicator and an east-to-adjust extruded-aluminum fence. You won't find a more feature-packed 6 in. benchtop jointer anywhere else.

• Motor: 1-1/2 HP, 120V, Single-Phase, 10A
• Maximum with of cut: 6 in.
• Maximum depth of cut: 1/8 in.
• Cutterhead type: spiral-style with 12 inserts
• Cutterhead speed: 12,000 RPM
• Table size: 6-1/4 x 30
• Dust port size: 2-1/2 in.

• 【PREMIUM QUALITY】- High-quality jointers woodworking equips the full metal workbench. With a maximum cutting width of 8 inches (20.32 cm), No-load speed：9000RPM/min, Power: 1500W, Feeding speed of 6M/min.
• 【TWO-IN-ONE DESIGN】- Combine a benchtop jointer and a planer in one unit, a two-in-one benchtop jointer can maximize workspace. A crank handle for easy adjustment of the height of cutter head; scale ruler for precise machining, automatic feeding design is available when it becomes a planer.
• 【CONSIDERATE DESIGN】- The dust exhaust interface can connect to dust collectors for easy cleanup of the flying wood chips to cultivate a clean working environment; This compact design of the jointer planer maximizes space-saving use.
• 【RELIABILITY & SAFETY】- Equipped with power-off protection electromagnetic switch, the over current protector, can be tripped when the motor is overloaded.
• 【WIDE APPLICATION】- Benchtop planer is designed for planing of old, weathered, rough and worn wood, and giving it an exceptionally smooth finish. Planers woodworking can be used for planning wood, bamboo, lining nylon, etc.

Product features

All-Metal Workbench

With a smooth and durable table surface, the wood planer benchtop can reduce damage to the surface of the material. The red cutter head guard helps you avoid accidents caused by a slippery grip.

User-friendly Crank Handle

Easily adjust the height of the cutter head with the crank handle, scale ruler for precise cutting depth. The oversized, ergonomic knobs are extremely user-friendly, providing you with an excellent experience.

2 IN 1 Function

This wood planer adopts the two-in-one design, combining a benchtop jointer and a planer in one unit. At the same time, lock the planing and jointing tables to ensure precise cutting and improve the efficiency.

Dust Exhaust Interface

The thickness planer can be connected to dust collectors to remove the trouble of flying wood chips and keep the working environment clean.

Heavy-Duty Stand

With detachable heavy-duty steel stand, it provides more convenient user operation and prevents the wood jointer form walking or wobbling during the process.

Safety Precautions

Power-off protection electromagnetic switch and over current protector are equipped, ensuring security during the delta jointer work.

Specifications

Body Material: Aluminum

Stand Material: Steel

Blade Material: High-Speed Steel

No-load speed：9000RPM/min

Maximum Cutting Width: 8 inches (203 mm)

Power: 1500W

Cutting Thickness: 120 mm

Feed Speed: 6M/min

Gross Weight: 35.16 kg/77.51 lb

Package Size:85x47x43 cm/33.46x18.50x16.92 inch