14 best coil siding nailers

Product description

The NV65AH2 Coil Siding Nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

• SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
• NO MAR NOSE CAP: Protects material from accidental marks
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

Product features

No mar nose cap attachment

Protects material from accidental marks.

Tool-less depth of drive adjustment

For optimal depth in a variety of applications.

Selective actuation switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic shield

Deflects wire collation for added safety.

Product description

Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2").

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Works with a Variety of Siding Materials, from Soft Wood to Steel

Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use

Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Siding nailer

• Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for added durability. Fastener Diameter .080 .092 Inch
• Soft rubber foot prevents damage to softer woods
• Tool free adjustable exhaust conveniently directs exhaust away from the user
• Ensure using compatible nails to prevent misfires/ensure proper operation.
• NOTE : No carry case is included.

User questions & answers

Question:	Can this gun be used to install azek trim boards
Answer:	No, with standard framing contact arm installed: Uses a 30° paper collated stick nails, in lengths of 2” to 3-1/2” (50-90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm). With metal connector attachment installed: Uses a 30° - 35° paper collated full round head metal connector nails, in lengths of 1-1/2” and 2-1/2” (38 - 64mm) and shank diameters of .131”, .148” and .162”.
Question:	Would this nailer be good for nailing fascia, soffit and exterior trim
Answer:	The only difference I see is about 270$ in price.😊All joking aside, this nailer is a beast. If you go with it I don’t think you will be disappointed.
Question:	can you use this gun on hardie board
Answer:	Yes, this gun will shoot up to a 3 1/4" nails. You will be very pleased with what this gun will handle. Hope it was helpful?
Question:	Will this work on James Hardie trim boards
Answer:	Adjustable depths.."" air..""length of nails.. go for it. If you break through the face back it off a bit and go. Nothing worse than a gun with too little punch. I'd use a smaller head for the trim though..6 penny

Product features

BOSTITCH N66C-1

Features:

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Adjustable exhaust conveniently directs exhaust away

Product description

The Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer is specifically designed for working on cedar shingles, roof and wall sheathing, siding, and fencing, and is compatible with 15 degree 13-14 gauge plastic or wire collated siding nails from 1-1/4" to 2-1/2". The nails load from the side fast and easy for efficiency. The body of the oil-free nail gun is made of lightweight and rugged die cast magnesium, creating a low maintenance tool great for use over extended periods of time. A one piece hardened steel drive blade and an anodized aluminum cylinder add to the durability. The siding nailer's bump fire trigger drives nails with precision and features a safety lock to prevent accidental firing. The convenient tool-free finger depth adjust provides fast and easy control of the depth of the nails, while the comfort grip handle helps reduce fatigue and increases accuracy. A no mar safety tip prevents damaging your working surfaces. This air powered nail gun also contains a 360 degree adjustable exhaust to direct air away from your face, and an air filter / anti-dust cap to keep internal components free from dust and debris. A belt hook, safety goggles, air connector, air tool oil, and adjustment tools are included. The Pneumatic 15 Degree 2-1/2" Coil Siding Nailer will allow you to tackle DIY projects as well as professional jobs. Operating Pressure - 70 – 110 psi. Fastener Diameter: 0.09" – 0.113"

• Nailed It: This pneumatic coil siding fencing nailer features a lightweight and durable magnesium body, ergonomic grip handle, no mar tip, and transparent side load magazine that holds up to 400 wire or plastic coated siding nails for hard-working efficiency.
• Many Applications: This nailer is ideal for cement siding, sheathing, fencing, fiber concrete siding, decking installation, plywood, and OSB. It features depth adjustment, allowing you to customize the firing depth for many different types of projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What does this nail gun weigh, unloaded
Answer:	These can cut and strip Romex / NM-B
Question:	Does this shoot .090 nails
Answer:	yes they are
Question:	does anyone know how well does it shoot 11/4 nails into cedar shakes
Answer:	it works
Question:	Will this nailer feed and shoot 1 7/8 aluminum screw shank, plastic collated, Duo-Fast nails
Answer:	Yes, as long as the AWG is between 20 and 30. Most communication wire is AWG 24, 26, so it would work. But, it is up to you to know the AWG of the wire you are using. If you use a hole that is too small in the stripper, you could nick the conductor and that would not be good. It's critical the proper AWG hole is used for the AWG wire.

Product features

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

Product description

"The Makita 2-1/2"" Roofing Coil Nailer (AN613) offers rugged construction and robust performance. The AN613 drives 15º wire and plastic collated nails for added convenience. The AN613 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a ""tool-less"" depth adjustment with nine detents settings engineered for more precise control and flush nailing. Additional features include rubber bumpers to protect the tool, smooth nose tip to prevent scratching, a multi-directional exhaust port, and reversable belt hook."

• efficient motor & trigger design offers leading fastening performance
• “tool-less” depth adjustment with 9 detents settings engineered for more precise flush and countersink nailing
• 2-mode selector switch allows operator to select contact or sequential nailing options
• drives 15º wire and plastic collated nails for added convenience
• smooth nose tip prevents scratching
• Power source type: Corded Electric

User questions & answers

Question:	The bullet points to the right of the pic of the nailer says it’s corded electric. Sure looks like an air nailer to me. What gives
Answer:	Hello，the 22 inch is the total end to end.
Question:	does it come with a case
Answer:	You don't need to cut it, you can just leave it 'deployed' or unrolled at a shorter length. Instead of the simple "pull down" spring loaded mechanism, this blind has a plastic 'chain' to the side that you use to raise it up/down. We know this because the first thing we did was pull on the bottom edge of the blind, which only caused it to rip out of the wall. (We now use molly bolts). Hope this helps.

Product description

Coil siding and fencing mailer with tool-free adjustable exhaust. Durable, lightweight (4.9 lbs.) aluminum housing. Smooth rubber foot aids in preventing damage to work surface. Tool-free adjustable rafter hook for convenience. Drives wire weld and plastic inserted coil nails. Tool-free depth of adjustment for precise setting of fasteners. Magazine holds up to 300 nails. Operating pressure 70-120 psi. Includes manual.

• Durable, lightweight (4.9 lbs.) aluminum housing. Smooth rubber foot aids in preventing damage to work surface
• Coil siding and fencing mailer with tool-free adjustable exhaust
• Easy to use

Product description

The Hitachi NV65AH2 2-1/2" coil siding nailer brings power, precision and convenience to the jobsite and weighs only 4. 8 lbs. Capable of driving nails as large as 2-1/2" x . 099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With newly added features like a selective actuation switch, side load, tilt bottom magazine and repositioned depth of drive adjustment dial, the professional preferred siding nailer gets even better. Additional features such as the adjustable air deflector, no mar nose cap and plastic shield add convenience and the ability to use both wire or plastic sheet nails creates flexibility. Standard accessories include Safety Glasses (875769), Hex Bar Wrench 3mm (943277), Hex Bar Wrench 4mm (944458), and Hex Bar Wrench 5mm (944459). Collation - Wire/Plastic, Nail Length 1-1/2" - 2-1/2", Nail Diameter . 090 - . 099, Nail Capacity 200 - 300, Nail Loading - Side, Operating Pressure PSI 70 - 120.

• Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
• Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
• Side load, tilt bottom magazine for fast and easy reloads; Capable of driving nails as large as 2 1/2 x .099 inches at a rate of 3 per second
• 4.8 pounds, lightweight and compact for easy maneuverability
• Tool less depth of drive adjustment for optimal depth in a variety of applications
• Drives wire and plastic sheet collated nails for added flexibility
• Adjustable air deflector, directs the air exhaust in any direction

User questions & answers

Question:	Does this nailer come with a belt hook
Answer:	Hi there! For most polishing on the GET75-6N Sander, the RSM6044 extra soft backing pad will give the best results. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Is Hitachi warranty good if purchased from this seller
Answer:	Like most products there are likely components manufactured from around the world. Are you asking where it was assembled?
Question:	Can this nailer be used installing sofit and facia 1/4" 4d headed nails
Answer:	The sanding paper/pad you use would determine what material you can sand - so yes
Question:	Will I receive a Hitachi or Matibo gun
Answer:	The bottom of this has a lot of holes to fit various pads, one of the BEST qualities about it, it gives you lots of options for sanding disc types. Even though a 5-hole may not line up perfectly, you would still get dust collection out of it because most of the holes will be functional. It comes with a special bosch pad that has a hole pattern designed specifically for this sander. ANY regular 8 hole, 5inch sanding disc will fit this and give you the dust collection functionality perfectly. The same would hold true for the 6inch model - an 8 hole disc as well. You can probably use Festool discs and those "Net" or "Mesh" discs that are there (which, by the way, work really well on this sander because it has a whole bunch of smaller holes too)

Product features

Side-load, Tilt-bottom Magazine

For fast and easy reloads.

Selective Actuation Switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic Shield

Deflects wire collation for added safety.

Tool-less Depth of Drive Adjustment

For optimal depth in a variety of applications.

Product description

The NV75A5 3" Siding/Light Framing Coil Nailer bridges the gap between framing and siding on the jobsite. It has the power to frame and the precision and convenient features needed for siding work. The capability to drive up to 3" x 0. 131" fasteners, and adjustable depth of drive make it the perfect tool for sheathing applications. Its light weight (5. 7 lbs), flexibility to accept wire and plastic collated nails, no mar nose cap, and selective actuation give it the convenience needed for siding applications. Additional features like the side-load tilt bottom magazine, 360º adjustable air deflector, aluminum rafter hook, and plastic shield make the NV75A5 the tool of choice for any framing and siding crews!

• FASTENERS: Accepts 16º wire coil nails from 1-3/4" - 3" and 15º plastic coil nails from 1-3/4" - 2-1/4"
• LIGHTWEIGHT: Only 5.7 lbs for easy maneuverability
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• NO MAR NOSE CAP: Protects material from accidental marks
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

User questions & answers

Question:	Has anyone used 2-1/2 inch 15 degree plastic coil nails for the nv75a5 gun
Answer:	15 gauge 15 degree wire collated coil nails from 1" to 2-1/4" in length
Question:	does it require oil
Answer:	Made in Japan
Question:	Does this take 3 1/2 nail
Answer:	It’s fast. Faster than Dewalt
Question:	What is the difference between the nv75a5 and nv75an
Answer:	I think it’s about one second I have never had to wait for it by the time I line up the next shot.

Product features

See Thru, Side Load, Tilt Bottom Magazine

For easy re-loads and easy remaining fasteners visibility.

Selective Actuation Switch

Allows for quick transitions between sequential and contact nailing with the simple flip of a switch.

Drives Wire and Plastic Sheet Collated Nails

For added flexibility.

Aluminum Rafter Hook

For added flexibility.

Product description

The MAX CN565S3 SuperSider is a top of the line professional grade pneumatic siding nailer. The CN565S3 is used for siding, fencing, exterior trim, furring, and strapping jobs. A no mar contact tip is included with this tool.

• Slim guide contact arm
• Anti-double Fire mechanism
• Maintenance free end cap filter ; Easy-nail-load magazine, rafter hook and protective carrying case.
• Easy twist adjustable deflector ;
• Easy 360 degree twist adjustable exhaust deflector allows the user to easily divertexhaust air away from them self without any tool.

User questions & answers

Question:	Where can a I find a replacement nose pad for this gun? I'm looking for the little red donut that mounts to the muzzle to reduce denting
Answer:	That depends by size and shank. On the low side I believe 225 nails(longer and thicker shanked nails) on the high side 300 nails (shorter with thinner shanks.)
Question:	Is the "carry case" blow-mold plastic? soft bag
Answer:	Yes, this starter kit works on the ISA slots. Great to get the computers in our garages to try and see if them working again. Any question, please let me know, free life time support. Thanks.
Question:	What is the difference between this unit & CN445R
Answer:	Hi, this kit diagnoses the RAM but not the RAM slots. We may look for the DDR4 RAM slot diagnostic card again on Amazon, you should find the diagnostic card to test the DDR4 RAM slot specifically, please make sure you get the correct desktop PC type or the laptop type DDR4 RAM slot test card. Hope this helps. Best regards. Happy New Year!
Question:	Can this gun use both wire and plastic collated nails
Answer:	hi my friend, thanks for your query, I am getting the new latest PCIe prokit ready so I can list it in my store soon. Please kindly wait until the latest kit is ready. probably need a little while. Sorry to keep you wait, I assure you the top quality products so we need to do many checking and testing first. Any question, please kindly advise again, I would like to help quickly.

Product description

Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and Side Load Magazine, Black

The Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer is specifically designed for working on cedar shingles, roof and wall sheathing, siding, and fencing, and is compatible with 15 degree 13-14 gauge plastic or wire collated siding nails from 1-1/4" to 2-1/2". The nails load from the side fast and easy for efficiency. The body of the oil-free nail gun is made of lightweight and rugged die cast magnesium, creating a low maintenance tool great for use over extended periods of time. A one piece hardened steel drive blade and an anodized aluminum cylinder add to the durability. The siding nailer's bump fire trigger drives nails with precision and features a safety lock to prevent accidental firing. The convenient tool-free finger depth adjust provides fast and easy control of the depth of the nails, while the comfort grip handle helps reduce fatigue and increases accuracy. A no mar safety tip prevents damaging your working surfaces. This air powered nail gun also contains a 360 degree adjustable exhaust to direct air away from your face, and an air filter / anti-dust cap to keep internal components free from dust and debris. A belt hook, safety goggles, air connector, air tool oil, and adjustment tools are included. The Pneumatic 15 Degree 2-1/2" Coil Siding Nailer will allow you to tackle DIY projects as well as professional jobs. Operating Pressure - 70 – 110 psi. Fastener Diameter: 0.09" – 0.113"



PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set)

For siding installation, similar to SA902, but this newer model will not scratch pre-painted siding. Heavy-gauge plastic helps avoid marring the painted surface. One person can install fiber cement siding while ensuring each course stays level. Adjusts for a 5, 6, 7 or 8-inch reveal. Sold in a set of two.

Gauge Gecko 5-8 Inch 2 Pack

• 1 of Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and Side Load Magazine, Black
• 1 of PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set)

Product description

The N75C-1 - Coil Sheathing/Siding Nailer is perfect for high-volume nailing of wall and roof sheathing. It drives 15-Degree wire weld collated and plastic inserted nails with shank diameters of 0.090-Inch to 0.131-Inch. It has a lightweight aluminum design for added durability. An adjustable depth guide sets nails to desired depths quickly and conveniently. Weight 4.9-pounds, 2.22 kilos. Driving Power 630 Inch/pounds. Fastener Range 1 1/2-Inch to 3-Inch Wire Weld and Plastic inserted coil nails (.090-Inch to .131-Inch Shank) magazine capacity 225-300 nails operating pressure 70-120 PSI thread fitting Type 1/4-Inch NPT.

• Perfect for high volume nailing of wall and roof sheathing
• Drives 15 degree wire weld collated and plastic inserted nails with shank diameters of 0.090 Inch to 0.131 Inch
• Lightweight aluminum design for added durability
• Adjustable depth guide sets nails to desired depths quickly and conveniently

User questions & answers

Question:	Will the n75c-1 accept maze nails clcem119 3” plastic collated nails
Answer:	Yes, but the trigger was missing a pin. Stole it from my old one to make it work!
Question:	After shooting 1 or 2 nails I have to move next nail in position to shoot. Using wire coil
Answer:	The one I ordered from Amazon did.
Question:	Does it come with both a sequential and contact trigger
Answer:	not sure about the CFM but pressure should be around 90-100 PSI
Question:	DOES IT COME WITH A CASE
Answer:	Operating Pressure: 70 - 120 psi

Product description

The CN-565Z 0° siding coil nailer is a top choice for fiber cement siding, cedar shake soffit, fencing, and sheathing. The easy to load magazine holds coils of 300 nails. The depth of drive dial allows for perfect nail placement depending on the application. These standard with a bump fire trigger allowing for rapid production, driving 6-7 nails per second. The belt hook, and rubber handle make the tool easy to handle. The CN-565Z is designed to be used with plastic collated zero degree coil nails (.080 to. 109 diameter shank),and accepts 1-1/4” to 2-1/2” length. The nailer weighs 5lbs. Complete backed by a 12 month warranty. Parts kits and accessories available. SIM DF225C GRTCS250Z QCND65. Uses Duo-Fast CL and CS series coil nails.

• Zero degree siding coil nailer for Duo-Fast zero degree plastic collated nails 1-1/4" to 2-1/2" length
• For fiber cement siding, cedar shake soffit, fencing, and sheathing.
• Magazine holds 300 nails
• Depth of drive adjustment to accommodate different thickness of material
• SIM DF225C GRTCS250Z QCND65

User questions & answers

Question:	It says 6-7 nails per second. What if i want to nail 1 nail per second ? Does it have that option
Answer:	Hello, Thank you for your question. Yes, you can use the Flexzilla Polyurethane Recoil Hose with your impact gun. If you would like to speak with someone at Flexzilla, please call us at 800-645-8258. Thank you, Team Flexzilla

Product description

CN90 Roofing Nail Gun

CN90 roofing nail gun is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. This nailer comes with all the features you might need to handle a regular roof, making it a simple choice for all kinds of standard roofing work.

Smooth Performance

Required Nail&50-90mm

Sturdy Materials

Ergonomic Design

key Features

Efficient Operation



Contact mode safety system; Sequential mode can be available by changing trigger; Quick-set depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust.

Nail Length&50-90mm



Drives full head coil roofing nails ranging from 2" to 3-1/2"; Magazine angle: 15 degree; Operating pressure: 70-115 PSI.

Sturdy&Durable



Durable yet lightweight aluminum for long life; High strength PC magazine can hold 200-300 nails at one time.

Safety Devices



Protective cover improves usage safety; Dust cover prevents dust from entering the interior of the tool.

Comfortable&Safe



Skid-resistant rubber grip helps relieve work fatigue and maximize comfort during long jobs.

Extensive Application



Suitable for a variety of different applications: wooden pallets, large wooden packing boxes, wooden furniture, and other wooden structures.

Specifications

Product Dimensions: 14.8" x 14.8" x 5.8" (345 x 377 x 146mm)

Operating Pressure: 70-115 PSI

Nail Length: 2"-3-1/2" (50-90mm)

Nail Diameter: 0.110-0.115" (2.8-3.8mm)

Material: Aluminum alloy

Power Source: Air-powered

Capacity Description: 200-300 pcs

Package Content

1 x Roofing Nail Gun

1 x Goggles

1 x Wrench

1 x Lubricant

• 【SMOOTH PERFORMANCE】- Contact mode safety system; Sequential mode can be available by changing trigger; Quick-set depth of drive helps to reduce the possibility of nail jams and increases more than 70% operation efficiency; 360° tool-free air exhaust. 
• 【REQUIRED NAIL&50-90 mm】 - Drives 15 degree, 2-Inch to 3-1/2-Inch full head coil roofing nails; Operating pressure: 70-115 PSI.
• 【STURDY MATERIALS】- Lightweight and sturdy. The die-cast aluminum will significantly reduce body weight while maintaining durability; High strength PC magazine can hold 200-300 nails at one time.
• 【ERGONOMIC DESIGN】- Protective cover on the nose will block the debris generated during the work and improve usage safety; Dust cover will prevent dust from entering the interior of the tool, which reduces the occurrence of faults; Skid-resistant rubber grip is designed to make you feel more comfortable while working.
• 【VERSATILE APPLICATION】- Best for applications of wooden pallets, large wooden packing boxes, wooden furniture, and other wooden structures.

User questions & answers

Question:	Can you use a siding nails on this gun
Answer:	Hello, Yes, the Recoil Hose will work well with your pneumatic nail gun. The fittings on the hose are 1/4" MNPT. If you would like to speak to someone at Flexzilla, please call 800-645-8258. Thank you, Team Flexzilla

Product features

Efficient Operation

This coil nailer has a contact mode safety system. Its sequential mode can be available by changing the trigger. It features a quick-set depth of drive for consistent and controllable nail fit.

Nail Length & 50-90MM

It drives full head coil roofing nails ranging from 2" to 3-1/2" with a 15° magazine angle. The operating pressure range is 75 to 115 PSI, and you can set the ideal air pressure to start with low pressure.

Sturdy & Durable

Our roofing nail gun is made of aluminum alloy, durable yet lightweight for long life. Its high strength PC magazine can hold 200-300 nails at one time to improve production.

Safety Devices

Its protective cover improves usage safety, and dust cover prevents dust from entering the tool's interior with no dust blockage, which will not affect the performance of nailing.

Comfortable & Safe

Its unique rubber grip design is shockproof and anti-skid for manipulating ease and comfort grip, helping relieve work fatigue and maximize comfort during lengthy jobs.

Extensive Application

Our roofing nail gun is suitable for various applications: wooden pallets, large wooden packing boxes, wooden furniture, and other wooden structures.

CN90 Roofing Nail Gun

CN90 roofing nail gun is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. This nailer comes with all the features you might need to handle a regular roof, making it a simple choice for all kinds of standard roofing work.

Product description

The Makita 2-1/2" Siding Coil Nailer (model AN611) combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4” to 2-1/2” nails (. 080 - . 099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a "tool-less" depth adjustment with 9 depth settings, and sharp spurs that grip the wood for increased control at an angle.

From the Manufacturer

The Makita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer features a non-slipping nose with an ideal shape for diagonal nailing. Operating at 65 to 120 psi, this nailer features an easy-load canister for maximum versatility. Chose from either sequential or bounce fire with the nail-mode selector. A depth-setting knob means easy adjustment of nailing depth (9 settings in increments of 1/16-inch). This tool keeps itself clean with a smart, built-in air filtering system, and a rubber bumper protects tool housing. The included silent sheet ensures no noise when disconnecting the coupler. The Makita AN611 also features a comfortable rubber grip; a built-in air filter to prevent dust or foreign matter from entering the tool; a 360-degree exhaust system to direct exhaust away from the operator. Accessories that are included with the iMakita AN611 are; a Hex wrench 4 (783202-0); plastic tool case (824490-1); and safety goggles (192517-8). This nailer weighs 5 pounds.

• 3-mode selector switch (contact, sequential, lock) allows user control over nailing options
• Built-in air filter minimizes dust and debris from entering tool
• Easy loading canister with nail size adjustment provides maximum versatility
• Multi-directional exhaust port directs exhaust air away from operator
• ""Tool-less"" depth adjustments with 9 settings
• Rubber bumpers protect work surface
• Smooth nose tip prevents scratching

User questions & answers

Question:	Can this be used for Hardie siding
Answer:	12 – 13 Gauge 15 Degree Wire or Plastic Collated Siding Nails from 1-1/16″ – 2″
Question:	can this nailer be used for fencing
Answer:	Yes they fire nicely in this gun. I prefer them over the wire coil especially on siding. As the wire coil can throw off the wire in all directions when fired. Normally a 2 1/4 inch nail would have worked for my siding project but I am overlaying Hardy lap siding onto the existing siding so I want to make sure I get a good attachment into the meat of the Doug fir studs. Also pay the extra for the ring shank it is well worth in just for the holding power. Here are the nails I used for my project. They cost a little more to purchase likely just because the wire coil nails are so abundant. But as far as their overall use they work great, https://www.amazon.com/gp/product/B002MUAW90/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Question:	Can i use this with 16D common nails? If not which is the correct one
Answer:	Yes, it requires oil. Use Metabo HPT part # 118338M and refer to manual for recommended application
Question:	adjustments for shooting 2-3/8" nail
Answer:	No. 3x . 131 is the largest

Product features

Makita AN611 2-1/2 inch Siding Coil Nailer

The Makita 2-1/2 inch Siding Coil Nailer (model AN611) combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4 inch to 2-1/2 inch nails (.080 - .099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a 'tool-less' depth adjustment with 9 depth settings, and sharp spurs that grip the wood for increased control at an angle.

Includes:

Key Features

Control- 3-mode selector switch (bounce, sequential, lock) allows user control over driving options.

Accuracy- 'Tool-less' depth adjustment with 9 settings for driving nails to the precise level.

Convenience- 'Tool-less' loading canister.

Durability- Built-in air filter minimizes dust and debris from entering tool.

Specifications

- Operating Air Pressure : 65 - 120 PSI.

- Nail Size : 1-1/4 inch - 2-1/2 inch .080 inch - .099 inch shank diameter.

- Magazine Capacity (range) : 200 - 400.

- Dimensions (LxWxH) : 13-1/16 inch x 5 inch x 12-1/2 inch.

Warranty

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall Makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to Makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of ‘merchantability’ and ‘fitness for a specific purpose’, after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Freeman Pneumatic PCN50 15Degree Coil Siding and fencing nailer is built for speed and durability. This coil nailer uses all brands of 15Degree wire or plastic collated nails ranging in length from 1" - 2", .83" -.98" In diameter. The 15-degree Siding nailer can handle cedar shingles, roof and wall sheathing, Siding installation and fencing. This nailer is a smaller/lighter version of its big brother, the Freeman PCN65 making it more user friendly on jobs requiring a nail 2" or less; why carry a brick when a pebble will do? The nailer features tool-free depth adjustment for fastening a wide variety of materials, side and front impact bumpers for safety, 360-degree adjustable exhaust, bump fire trigger, clear bucket to always know how many fasteners You have, two no-mar tips, belt hook, 1/4" Npt Milton air connector and made of lightweight and durable die-cast magnesium. The total package is backed by Freeman 7 year warranty.

• No-mar tip helps prevent damage to work surface/includes 2ND no-mar tip
• Tool less depth adjustment for handling a variety of materials
• Side loading canister and quick driving for efficiency
• Contact Fire for safe and precise fastening
• Shoots 15-degree nails ranging from 1 in. To 2 in

User questions & answers

Question:	what gauge of nails does it shoot
Answer:	I believe the nv75a5 is the newer version.