14 best cordless framing nailers
Cordless framing nailers are versatile power tools used in construction and woodworking for driving large nails, typically framing nails, into wooden structures. They are part of the nailer family and offer the convenience of cordless operation. Here's what you need to know about cordless framing nailers:
Cordless Operation: Unlike traditional pneumatic nail guns, cordless framing nailers operate on rechargeable batteries. This cordless design provides greater mobility and flexibility in construction projects.
Nail Size: Cordless framing nailers are specifically designed for driving larger nails, often referred to as framing nails or clipped head nails. These nails are commonly used in framing and sheathing applications in construction.
Power Source: They are typically powered by lithium-ion batteries, known for their quick charging times and relatively long run times. Some models use fuel cells in combination with batteries for added power and efficiency.
Depth Adjustment: Most cordless framing nailers come with depth adjustment features, allowing you to control how deep the nail penetrates into the material. This is essential for ensuring a secure and flush finish.
Sequential and Bump Firing: Cordless framing nailers often offer both sequential and bump firing modes. Sequential firing requires a trigger pull for each nail, while bump firing allows you to continuously fire nails as you press and release the trigger.
Anti-Dry Fire Mechanism: To prevent damage to the tool and wasted shots, many cordless framing nailers have anti-dry fire mechanisms that disable firing when the magazine is empty.
Weight and Portability: These tools are designed to be lightweight and easy to handle, reducing user fatigue during extended use. This portability makes them suitable for working in tight or elevated spaces.
Magazine Capacity: The nail magazine can vary in capacity, typically holding between 20 to 30 nails. Larger magazines reduce the need for frequent reloading.
Applications: Cordless framing nailers are used in a variety of applications, including framing, sheathing, roof decking, siding, and other structural work.They are essential tools for professional carpenters and contractors.
Safety Features: Safety is crucial when using these tools. They often come with safety mechanisms like no-mar tips to protect the work surface, trigger locks, and a safety contact tip to prevent unintentional firing.
Cost: The price of cordless framing nailers varies based on brand, features, and power. High-end models may offer more advanced features, while budget-friendly options provide essential functionality.
Maintenance: Regular maintenance includes cleaning the tool, checking the battery, and lubricating moving parts to ensure smooth and reliable operation.
In summary, cordless framing nailers are indispensable tools for construction professionals and woodworking enthusiasts, offering the convenience of cordless operation while providing the power and precision needed for framing and structural work. When choosing a cordless framing nailer, consider factors such as nail size, power source, safety features, and the specific needs of your projects.
Below you can find our editor's choice of the best cordless framing nailers on the market
DEWALT 20V MAX Framing Nailer Kit, 30-Degree, Paper Collated (DCN692M1)
DEWALT
Product description
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
- Tool-free selector switch for sequential or bump Fire modes
- Tool-free depth adjustment for precise nail placement
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
User questions & answers
| Question: | is it possible to use this nailer on dry wall |
| Answer: | Yes you can. Just use a smaller nail and adjust the depth. |
| Question: | Biene con cargador |
| Answer: | Si pero esta herramienta es muy mala mo la recomiendo |
| Question: | Do I need the two speed? Those who have the two speed, do you use the second one that is not on the 690? Thanks |
| Answer: | Yes. The 2 speed is worth the extra money |
| Question: | will this do framing, finishing and brad nails |
| Answer: | Only framing nails |
Metabo HPT Cordless Framing Nailer Kit, 18V, Brushless Motor, 2" Up To 3-1/2" Framing Nails, Compact 3.0 Ah Lithium Ion Battery, Lifetime Tool Warranty (NR1890DRS)
Metabo HPT
Product description
The Metabo HPT NR1890DRS 18V cordless framing nailer Hitachi power tools is now Metabo HPT. Same tools. New name. The Metabo HPT NR1890DRS 18V cordless plastic strip framing nailer completely raises the bar for cordless framing nailers. Get the power and performance of Metabo HPT (formerly Hitachi power tools) pneumatic nailers with the freedom of cordless technology. This cordless framing nailer is ideal for all construction framing applications along with punch-out work on a jobsite. Get quick in-and-out operation with minimal hassle and professional results. Designed so you no longer need to worry about dirty hoses, loud compressors or expensive Gas cartridges. High stable driving power allows the nailer to drive 3-1/2” nails into even the toughest of engineered lumber with ease Equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. Sealed compressed air drives each nail instant drive performance means there is zero ramp up time to drive nails drive up to 2 nails per second and up to 400 nails per charge using the compact 3.0Ah battery. Recoil feels like a pneumatic nailer. Best of all, no air tank required. Covered by Metabo HPT lifetime Lithium Ion tool & 2-year Lithium Ion battery & 1 Year charger. Dry fire Lock out system prevents nailer from driving when fasteners are low for added safety. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when cordless nailer is not needed. 10. 8 lbs. And well balanced for easy maneuverability.
- Same tools. New name. Hitachi power tools have renamed to Metabo HPT
- Cordless Framing Nailer
- Included: NR1890DRS, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
- Drives plastic strip nails from 2" to 3 1/2" at 2 nails per second and up to 400 nails per charge
- Zero Ramp up time: air spring system increased driving speed and provides recoil like a pneumatic nailer
- Unique air spring drive system: compressed air drives each nail
- Selective actuation: transitions between sequential mode and bump Fire mode
User questions & answers
| Question: | This nail gun is for 21 degrease. ? Or for the convencional framing nails |
| Answer: | 21° and 30° are both conventional framing nails. But this is a 21° nailer. |
| Question: | Just to make sure, the cordless nail only does bring a battery, fast charger, bag, and safety glasses |
| Answer: | Yes, and an M5 Allen Wrench. The Fast Charger is the UC18YFSL and it will charge the 3.0 Ah battery in 45 min. There is a Rapid Charger (UC18YSL3) that charges the same battery in 30 min. |
| Question: | Garantia pistola |
| Answer: | We offer a 60 day warranty. Hitachi offers a one year from date of purchase. All warranty issues after the first 60 days must go directly through Hitachi. Have a great day. |
| Question: | Will this gun dry fire? I just bought it and charged the battery but it doesnt fire. Does it have to have nails in it to fire |
| Answer: | No it will not, nor should you try to dry-fire a nail gun. It's generally very bad on the tool. It requires about three or four nails in it to fire, depending on the size of the nail. Which means that once you us it, the gun is NOT EMPTY just because it won't fire the last nail or two; there is every chance that if you drop it or kick it out of the way it will manage to fire one of the remaining nails. Always treat this nail gun and any other nail gun like it's ready to fire. |
Product features
Unique Air Spring Drive System
Uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives
Tool-less Depth of Drive Adjustment
For a professional finish with varying materials
Selective Actuation on the Control Panel
Transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime
Pivoting Rafter Hook
For easy storage when nailer is not needed
Metabo HPT 18V Cordless Framing Nailer, Brushless Motor, 2-Inch up to 3-1/2-Inch Clipped & Offset Round Paper Strip Nails, 3.0 Ah Lithium Ion Battery (NR1890DCS)
Metabo HPT
Product description
The Metabo HPT 18V Cordless Paper Strip Framing Nailer NR1890DCS completely raises the bar for cordless framing nailers.
This cordless framing nailer is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nalier, but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer best of all, there is no refilling of the air tank required.
This cordless framing nailer is ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite for quick in-and-out operation with minimal hassle and professional results.
- INCLUDED: 18V Cordless Paper Strip Framing Nailer
- CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom
- FASTENERS: Accepts 30 degree clipped or offset round head nails from 2-In to 3.5-In length for jobsite versatility
- POWER: Drives 400 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
- APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose
- DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment
- PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer
User questions & answers
| Question: | It works whit a plastic strip |
| Answer: | No. 2 completely different cameras. Yours I believe is a 20MP, the w80 is a 7MP. Also your battery is a BN1, not BG1 |
| Question: | This item made in usa |
| Answer: | Not sure, is your item a Sony, first of all, and second, look at your battery that is already in your camera and see what the # is on the actual battery. That is how I knew it would fit mine. there is a number on the battery itself and that will confirm if it will fit.. thank you - if it does fit your camera, you will not regret getting this.. I love it; and the battery life is so much stronger .... and I love that you can charge the batteries in your vehicle on the car charger!!! it is simply the best thing!!! |
| Question: | I bought this gun i charged the battery and i put in 30 degree plasic strip nails and its not shooting. Whats going on |
| Answer: | I’m not sure. The bottom of my camera where battery goes says 3.6 v so check your camera. I don’t have my original battery to check. |
| Question: | Does it sink nails in engineered lumber |
| Answer: | You can plug the charger into a wall outlet or into the power outlet in a car. However make sure that for the sony batteries you turn them over when you plug it into the charger . This means the rounded sides are down and the rear of the battery is up. Otherwise the batteries will not charge. Other than that Ihave used the batteries since January and they work well. |
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
PORTER-CABLE
Product description
The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.
- NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
- CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
- INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
- BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
- 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.
User questions & answers
| Question: | Does this come with a charger |
| Answer: | This one does come with a battery & charger, but they sell a model without a charger |
| Question: | Would this tool work to repair my fence |
| Answer: | Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too. |
| Question: | Will it go through 1" oak trim |
| Answer: | yes |
| Question: | can i use multiple lengths of nails |
| Answer: | 5/8 inch through 2 inch nails....awesome gun...i am so happy with it |
DEWALT 20V MAX Framing Nailer Kit, 21-Degree, Plastic Collated (DCN21PLM1)
Product description
The 20V MAX* 21 Plastic Collated Cordless Framing Nailer delivers the performance demanded by pro's to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4" and 0.148" in diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
- Dual-speed motor optimized to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
User questions & answers
| Question: | Does this come nailer come withe batteries and charger |
| Answer: | Hi hope this answer your question(s) lol ... Tool kit includes: XP Cordless Framing Nailer, rechargeable lithium-ion battery, lithium-ion battery charger, rugged carrying case, owner's manual, safety glasses, and 5/32 in. hex wrench |
| Question: | What nails can i put in this .. thank you |
| Answer: | Orange Fuel Cell. I purchased the fuel with the nail pack for the CF325 Model. Fuel and nail packs are matched, and would be ordered by Nail Size (Gauge and Length, and Angle/degree). Example: This worked for my nailer ( https://www.amazon.com/dp/B002NU6HBQ/ref=cm_sw_r_em_apa_LsKHxb16PDPP4 ) |
| Question: | can you use the 20/60 volts-9ahdwalt battery or which is the best batery for this nailer |
| Answer: | I do not know. I purchase the nails and gas cylinder as a kit. |
| Question: | Que medidas de clavos usa y cual tipo debo usar |
| Answer: | http://www.paslode.com/product/cordless-xp-framing-nailer/ Go to the above web-site and look at the Spec's. I'm building a new home and purchased this gun. I have had other Battery powered nail guns, and returned them because they were not reliable. Nails (30 degree) are expensive, but you get what you pay for. If your going to be in a remote location I suggest you buy extra gas cylinders and paslode oil. I also have the Paslode Finish Nailer as well. Both products are very reliable and well worth the investment. I give it 5 Stars..... Good luck with your project |
MILWAUKEE ELECTRIC TOOL 2745-20 M18 Fuel 30 Degree Framing Nailer
MILWAUKEE'S
Product description
The MILWAUKEE M18 FUEL 30 Degree Framing Nailer sets the new standard for cordless framing nailers. By leveraging a nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence, this nailer provides users with pneumatic performance and the convenience and freedom of cordless power. Delivering the power to sink full round head nails into dense engineered lumbers, this framing nailer enables users to tackle even the most demanding framing applications. To keep users productive and efficient throughout the day, the framing gun fires 3 nails per second with zero ramp-up time, meaning a nail is fired as soon as the user pulls the trigger. Additionally, the cordless framing nailer operates using only Milwaukee's REDLITHIUM Batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost and hassle of gas cartridges and maintenance associated with competitors nailers.
- Included: On board hex key storage, No-mar tip, Rafter hook, Belt hook
- Includes: M18 FUEL 3-1/2 -inch 18V 30-Degree Framing Nailer 2745-20 (Battery and Charger sold separately)
- Sequential and contact actuation firing modes
- Zero ramp-up time
- Dry fire lockout
User questions & answers
| Question: | Will this nailer work with paslode nails [30 degrees] |
| Answer: | Sounds like you need to buy a charger for the computer. This is a replacement battery for the computer. It replaces the battery unit that came in the computer originally. |
| Question: | Include a battery |
| Answer: | Call amazon and tell them what your problem is |
| Question: | Is this compatable with full head nails |
| Answer: | Yes, I have the same model Inspiron. |
| Question: | Does this nailer fire full head nails |
| Answer: | Thank you for inquiring our M5Y1K Laptop Battery Compatible with Dell Inspiron 40Wh 14.8V. You can fully charge your battery and test the using time of it. Normally, a healthy battery can last about 2 hours, if your original battery can not meet it. Maybe you need a new replacement. If convenience, you should active it at first. Please discharge all the remaining power and recharge it for continuous 8-12 hours. And then discharge and charge 8-12 hours again, just do it for 2 or 3 cycles, so that it can be activated completely. In addition, there are many different batteries can work for Dell 15 Inspiron 5000 series, please make sure your original battery is M5Y1K battery before you buy it. This M5Y1K battery fits 6YFVW VN3N0 GXVJ3 W6D4J HD4J0 4WY7C, and can work for Dell Inspiron 14 15 17 3000 5000 Series, 5558 5559 3521 453-BBBR 3452 3451 3458N 3567 5755 5758 5759 and so on. |
SENCO F-35XP 3- 1/2” 30-34 Degree Paper-Tape Cordless Pneumatic Framing Nailer
Senco
Product description
Combining true pneumatic feel, speed and power with cordless convenience, the F-35XP drives up to 31/2” x .148” framing nails into the hardest substrates without the expense and hassle of fuel cells. With its robust design and durable construction the F-35XP is ideal for professional framers and contractors.
- Drives 2" - 3-1/2" 30-34 degree paper-tape framing nails
- Fusion cordless air-power technology provides true pneumatic performance with no ramp-up time
- Power to drive 3-1/2” x .148” nails into engineered lumber
- Pressure relief valve and refillable air port for easy maintenance
- Oversized, rugged rafter hook
User questions & answers
| Question: | How heavy is it |
| Answer: | Yes you can use the 60v in any tool that used the 20v battery |
| Question: | Can you use non paper tape nail on the sencoF-35xp cordless framing nail gun |
| Answer: | Because you aren't using it correctly? |
| Question: | What nail does it takes |
| Answer: | The tool will hold up to 49 nails at a time. |
BOSTITCH 20V MAX Cordless Framing Nailer Kit, 28 Degree Wire Weld (BCF28WWM1)
Product description
The BOSTITCH BCF28WWM1 20V MAX 28 Degree Wire Weld Cordless Framing Nailer Kit allows you to go cordless with this 100% battery powered framing nailer. This cordless framing nailer drives framing nails up to 3-1/2 in., features a 2-speed motor, and has tool-free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28-degree wire weld collation, and also comes with a rafter hook. It also has a stall release lever to reset the driver blade in case of a jam. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a BOSTITCH battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCF28WW Wire Weld Framing Nailer, BCF204 20V MAX* High Capacity Li-Ion Battery (4.0Ah), BCB115 Charger, Kit Bag.
- NO COMPRESSOR NEEDED: Save time and money by going cordless
- OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2" fasteners
- NAIL SIZE:Accepts full round offset nails in 28-degree wire weld collation
- STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
- WARRANTY: 3 year limited warranty
User questions & answers
| Question: | Is there an advantage with this nailer over the bostitch cordless nailer that takes the paper tape nails? I am trying to decide which one to buy |
| Answer: | I have been very happy with mine. Used to put true 2 inch oak planks down on a barn floor. Nails are pricey but worked way better then trying to fasten them with screws.. |
| Question: | Will this work with full round nails |
| Answer: | We used it to shoot 51/4 inch nails with no problem at all. Great tool |
| Question: | Any chance dewalt 20v batteries fit this gun |
| Answer: | If you look near the tip, where the next nail is waiting to be fired, there is only room for a 3 1/4" nail at best. Mine is loaded with 3" now and there's about 3/8" gap below that. You might be able to fit 3 1/2" nails if you machined off some material. But at that point just get a gun that will accommodate longer nails. |
| Question: | Will this drive a nail thru 3/8" thick lp smart siding. (hardboard siding)? how many amp hour battery and how long it last? thanks |
| Answer: | No, this is a framing nailer |
Paslode, Cordless XP Framing Nailer, 905600, Battery and Fuel Cell Powered, No Compressor Needed
Paslode
Product description
The cordless XP framing nailer system is designed to deliver 15% more power to increase productivity. Less standing nails and better drive performance into harder woods means you can put your hammer away and let this cordless nailer do it all. Plus, the new Paslode framing fuel with all season formula lets you keep working in temperatures down to 14⁰F when compressor hoses are freezing. The lightweight Paslode cordless XP framing system offers the nailer, nails, and fuel so you enjoy the power to drive non-stop nailing all day, every day.
- Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
- All Season Formula - Works in temperatures down to 14°F.
- Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
- Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
- Compact Design: Fits between 16" o.c. studs, joists and roof trusses.
User questions & answers
| Question: | Dumb question: is the charger included (no mention specifically of same |
| Answer: | This framing nail does not work with plastic collated nails. This model requires clip head or offset round paper collated nails. If you need the one that uses round head plastic collated nails, you will need model NR1890DR or NR1890DRS. |
| Question: | What gas cart is used |
| Answer: | This tool is not made in the USA. |
| Question: | is the nails for this gas nails the same as the air nailer? i will be using both together |
| Answer: | First, a reminder that this version of the nailer is only made to shoot papertape nails, 30-34 degree. If the nails you have are trul plastic collated them they are 21 degree and will cause damage. After making sure you have put in the correct nails, there are two buttons right by the bottom of your hand when holding the tool. One is on/off, and the other changes from sequential mode to bump mode. Press and hold the on button till a green light comes on, then operate. |
| Question: | What is the largest length nail that can be used with this gun? I'll be doing some floor plates in a remote location, so probably need at least |
| Answer: | In most cases you shouldn't have any problems with this. |
DEWALT DCN692B 20V Max Cordless 30° Paper Collated Framing Nailer, Tool Only
DEWALT
Product description
Cordless Framing Nailer Bare Tool Voltage 20.0 Head Style Various Fastener Range 2 in to 3-1/2 In. 30 Degrees Collation Angle Paper Collation Type Shank Dia 0.113 in to 0.131 In. Magazine Angled Magazine Capacity 55 Cordless Tool Battery Type Li-Ion Magazine Loading Lock and Load Depth Control Continuous Adjustment Battery Included No Battery Pack Replacement 21RV47 Battery Capacity 4.0Ah Handle Type Contoured Over Mold Triggering Mode Sequential or Bump Tip No Mar Light No
- Brushless motor and engine design provides the power to drive 3 1/2" nails
- Sequential or bump operating modes
- Dual speed optimizes the motor for different nail lengths
- 33 magazine holds up to 55 paper collated nails
- Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
- Model number DCN692 and DCN692B are same
User questions & answers
| Question: | Can some please give me Amazon link for smallest nail this nailer take thanks |
| Answer: | the 60V Max battery will not work on all 20V DeWALT. It will only work on the 20V Max, which this is. |
| Question: | Can you use the new 60V Max battery with this |
| Answer: | DeWALT does make a 20V finishing nailer but it is not a 20V Max. https://smile.amazon.com/DEWALT-DCN660B-Gauge-Finish-Nailer/dp/B0195KBAVI/ref=sr_1_fkmrnull_6_sspa?keywords=DEWALT+60V+Max+Nailer&qid=1557624867&s=gateway&sr=8-6-fkmrnull-spons&psc=1 |
| Question: | I see its a great framing gun but can i use it for finishing nails too |
| Answer: | DeWalt Model DCN692B also features a 2 Speed Selector Switch Optimizes Speed for Fastener Lengths. Otherwise, the specifications are the same. |
| Question: | What is the difference between the |
| Answer: | It’s round |
Milwaukee 2745-21 M18 FUEL 30-Degree Cordless Framing Nailer Kit (5 Ah)
Product description
The M18 FUEL 30-Degree Framing Nailer sets the new standard for cordless framing nailers. By leveraging our nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence this nailer provides pneumatic performance with the convenience and freedom of cordless. Delivering the power to sink clipped or full round head nails into dense engineered lumbers, this tool can handle even the most demanding framing applications. To keep you productive and efficient throughout the day this tool fires 3 nails per second with zero ramp up time, meaning a nail is fired as soon as you pull the trigger. Additionally, this tool operates using only our REDLITHIUM Batteries and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The M18 FUEL 30-Degree Framing Nailer delivers the pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. Effortlessly drives 2 in. - 3-1/2 in. clip head (full round offset) framing nails into engineered lumbers Fires up to 750 nails per M18 REDLITHIUM XC 5 Ah battery charge (battery sold separately) Onboard magazine holds single strip of 30-Degree full round head nails Optional extended capacity magazine doubles capacity to minimize downtime Onboard belt hook and fold-out rafter hook Includes: M18 FUEL 30 Degree Framing Nailer - 2745-20, M18 REDLITHIUM XC Extended Capacity 5 Ah Lithium-Ion Battery Pack - 48-11-1850,M18 / M12 Multi-Voltage Lithium-Ion Battery Charger - 48-59-1812, No-Mar Tip,Contractor Bag.
- Sealed compressed nitrogen gas mechanism requires no oiling or maintenance
- No consumable, smelly gas cartridges required
- Tool-free adjustment allows for changes to drive depth on the fly
- 2 Firing modes: sequential and contact actuation (bump fire), both with no ramp-up time
- Bump fire shoots up to 3 nails per second, delivering pneumatic speed
User questions & answers
| Question: | What is the weight of nailer plus battery |
| Answer: | No, you’ll need to use a voltage adapter. |
DEWALT 20V MAX Framing Nailer, 21-Degree, Plastic Collated, Tool Only (DCN21PLB)
Product description
The 20V MAX* 21° Plastic Collated Cordless Framing Nailer delivers the performance demanded by pro's to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4" and 0.148" in diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
- Dual-speed motor optimzed to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
User questions & answers
| Question: | Does it come with battery and charger |
| Answer: | The DCN21PLM1 will accept 2 - 3 1/4 inch 21 degree plastic collated nails. |
| Question: | Will this gun take the 60v batteries |
| Answer: | I don't know. I have never tried that. I am not sure a B&D 20V would even fit this tool. |
| Question: | Why does the hanger suck so bad |
| Answer: | Yes it does. Very nice and easy to use. |
| Question: | Will this take two strips of nails at a time or just one |
| Answer: | Yes and works with ones with out eye balls too! I just got the thing...It works good, but you have to push hard on the nose to get them to go flush. |
MILWAUKEE ELECTRIC TOOL 2744-20 M18 Fuel 21 Degree Framing Nailer
Product description
The Milwaukee® M18 Fuel™ 21 deg. framing nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, PowerState™ brushless motor and RedLink™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. The cordless framing nailer uses only Milwaukee's RedLithium™ batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and associated maintenance. The M18 Fuel™ 21 deg. framing nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.
Power to sink nails in engineered lumber
Fires 3 nails per second
No gas cartridge required
Zero ramp-up time
Tool free drive depth adjustment
Sequential and contact actuation firing modes
Dry fire lockout
Rafter hook included
Belt hook included
On board hex key storage
BOSTITCH 20V MAX Framing Nailer Kit, 30 Degree Paper Tape, Cordless (BCF30P1)
Product description
The BOSTITCH BCF30PTM1 20V MAX 30 Degree Paper Tape Cordless Framing Nailer Kit allows you to go cordless with this 100% battery powered framing nailer. Its two-speed motor drivers a full range of framing nails, and a tool-free firing mode selector lets you quickly change between sequential and bump-fire modes. This tool accepts clipped and full round head nails in 30-degree paper tape collation. It also offers a rafter hook and a tool-free depth adjustment, along with a stall release lever to reset the driver blade in case of a jam. This 20 volt cordless nailer helps you net savings in time and cost. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a BOSTITCH battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCF30PT Paper Tape Framing Nailer, BCF204 20V MAX High Capacity Li-Ion Battery (4.0Ah), BCB115 Charger, Kit Bag.
- NO COMPRESSOR NEEDED: Save time and money by going cordless
- OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3 1/2 inch fasteners
- NAIL SIZE: Accepts clipped and full round head nails in 30 degree paper tape collation
- STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
- WARRANTY: 3 year limited warranty
User questions & answers
| Question: | Where do you get the lubricating oil for the piston for this |
| Answer: | Judging by your photos, you are using plastic collated nails. These would be 20-21 degree angle. They will not work in this gun. Use the correct nails for proper function. You can't use diesel in a gas engine... same diff. |
| Question: | does amazon sell nails for this nailer |
| Answer: | When paired with the 4.0Ah battery, this unit is capable of up to 600-800 nails per-charge. |
| Question: | What am i doing wrong bought two of these as gifts and none of them work. Cant strike nails more then half way on full and only works when it wants to |
| Answer: | Minimum Nail Diameter 0.113 up to a Maximum of 0.148. 21 Degree Full Round Head Strip Plastic or Paper Collated Nails. Maximum Length 2" up to 3 1/4" |
| Question: | How many nails can you shoot before the battery needs recharging |
| Answer: | Thank you for your interest in MAX Professional Grade Framer. Minimum Nail Diameter 0.113 up to a Maximum of 0.148. 21 Degree Full Round Head Strip Plastic or Paper Collated Nails. Maximum Length 2" up to 3 1/4" |
Latest Reviews
View all
Fitbit Basic
- Updated: 24.04.2023
- Read reviews
Creations Glitter Papers
- Updated: 14.07.2023
- Read reviews
Leg Shavings
- Updated: 08.01.2023
- Read reviews
Microsoft Web Cameras
- Updated: 03.06.2023
- Read reviews
Cards
- Updated: 09.05.2023
- Read reviews