14 best max 15 gauge finish nailers

Product description

The NF665/15 SuperFinisher is the newest tool MAX has to offer. It shoots 15 Ga. Straight finish nails from 1 1/4" to 2 1/2" in length. The tool has a dial adjustable depth control, no mar tip, easy jam clear door, belt hook, easy twist exhaust deflector, weighs only 3.9lbs., comes with a carrying case and has switchable fire mechanism.

• Lightweight at 3. 9lbs
• Selectable Fire mechanisms
• Easy jam clearance
• Belt hook
• No-mar tip
• Easy twist exhaustible deflector

User questions & answers

Question:	Does this item come in a carry case
Answer:	Yes. The Max NF255F/18 Brad Nailer that I purchased was delivered with a sturdy plastic moulded case. Cheers. Peter.
Question:	Does it oil
Answer:	No
Question:	So the ad says its an angled finish nailer but it shoots straight finish nails. Which is it
Answer:	The gun will not fire unless depressed onto a surface. However, if you run out of nails it will continue to fire . You have to keep your eye on that.

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Diagnostics with LED indicator Communicates battery charge status: charged
• Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
• Automatic shut-off protects excessive discharge of vehicle's battery
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Can I use this for trim
Answer:	I plan to use mine for trim shortly (shorter nail). Used longer nail for 3/4" pine tongue and groove wall. Love the product.
Question:	How many finish nails does one battery fire? I know the battery size will influence the number significantly but is it closer to 150 or
Answer:	I use mine all day and on a fresh battery it will go the distance. I have never felt like the batteries were an issue vs amount of nails shoot
Question:	Will this gun shoot staples also
Answer:	no 1 1/4'' to 2 1/2 15ga finish nails only.
Question:	Does this include the battery, charger and bag
Answer:	Yes, It includes both

Product description

The NT65MA4 15-Gauge Angled Finish Nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

• 15 Gauge Finish Nailer
• Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required
• Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
• 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece
• At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability

User questions & answers

Question:	will bostich FN type nails work in this gun
Answer:	No, you must use DA-type nails. The good news is that 95% of nail brands are DA-type: Hitachi, Senco, Nail Pro, Fastener USA, and so on.
Question:	Is this similar to Makita nailer and does use other brands of nails
Answer:	Good morning, This tool accepts the following. It doesn't have to be Hitachi nails. Have a wonderful day. It accepts 15-gauge nails from 1-1/4" long to 2-1/2" long.
Question:	Can I purchase a nose cap for this nailer.. mine didn’t come with one
Answer:	Look carefully at your gun. The nose cap is mounted, for transport, on the bottom end of the magazine. It's black, and easy to miss. I returned my first gun, thinking that it was missing the nose cap, as well.....
Question:	Nails for this item
Answer:	Use only DA-type nails (i.e., NOT Bostitch FN-style).

Product features

Selective Actuation Switch

Allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required

Tool-less, Easy to Clear Nose

For quick nail extraction should a nail jam during use

360-degree Fully Adjustable Exhaust Portal

Directs air exhaust away from the user or work piece

Factory Installed Air Fitting

Angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

This product features a 20-Degree finish nailer, bump operating mode, and integrated LED lights as well. It is convenient and works effectively. It is definitely a great quality product.

• Integrated LED lights
• Bump operating mode
• 20-degree finish nailer
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is it brushless
Answer:	I believe that it is brushless. I have 2 of the nail guns and they are great. Works fast and sets the nails ever time. Battery lasts a long time as well.
Question:	Just got the nail gun. somehow it jammed as soon as placed brads in it. it seems to flip the brad. how is that possible? not happy i'm wasting brads
Answer:	Ummm, yes, this is a finish nailer, big difference from a brad nailer. Make sure you are using 16 gauge 20 degree nails, not 15 gauge, and definitely not 18 gauge brads. This is a great nailer, but I'm not tossing out my Bostitch air nailers to replace it! This is a great supplement to the air nailers for small jobs that only last a day or so.
Question:	Have they sorted out the Low nail depth issue yet? After some use my contractors say it wont Drive 2-1/2 nails
Answer:	This is my second Dewalt finish nailer and I have never had any issues with it not driving 2 1/2" nails. That being said, if you are driving several 2 1/2 nails then you need to make sure you are working with a fully charged battery. I have noticed that if the battery gets to a 1/3 charge it will not drive 2 1/2" nails as deep. It also depends on the type of wood (hard or soft).
Question:	Can this be used for blind nailing tounge and groove paneling
Answer:	Yes but don't waste your money if you plan on using this gun a lot. I've had mine in the shop 3 times in the year I've owned it. Buy the 18 volt version is more powerful and breaks way less. I've used mine for the last 6 years at least. This new gun will not even drive 2 1/2" nails consistently through soft wood let alone any hard wood.

Product description

The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Tool-free selectable trigger for sequential or contact actuation modes
• Tool-free jam release to quickly and easily clear nail jams
• Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
• Ideal for fastening crown molding, door & window casings, and baseboards
• Use 16 Gauge angled finish nails from 1-1/4″ to 2-1/2″ for maximum performance on the unit

User questions & answers

Question:	Can it set nails in hardwood
Answer:	About 8ft long.
Question:	Do nails go in straight, or do they penetrate at an angle? Hence, the name angled finished nailer
Answer:	Yes it will! Cheers, Beverage Factory Customer Support
Question:	Have anyone use 16ga. paslode nail to this dewalt? it's 20 degrees angle,i wonder if it fits before i buy it, gun down lot of nails leftover
Answer:	Hello, The top opens and if your arms are the right size and length you can reach all of the interior, something like a carboy brush is needed if you have large diameter or short arms. I recommend pressurizing and pushing both cleaning and sanitizing solution through the output to make sure your dip tube is clean. Anthony The Beverage Factory
Question:	baretool only? or comes with battery and charger
Answer:	Hello, Thank you for your question. The dip tube will already be inside the tank. Best wishes, Kaylyn Beverage Factory 800.710.9939

Product description

The DEWALT DWFP72155 15 GA PrecisionPoint™ "DA" Style Angle Finish Nailer drives 15 Gauge DA style nails from 1-1/4 in. to 2-1/2 in. making it ideal for interior trim, baseboards, crown molding and more. With its 16 in. On-center gauge to measure exactly 16 in. from end to nose, and PrecisionPoint™ technology for precise nail placement, this tool is ready to work.

• Precision Point™ Technology: Precise nail placement due to a smaller nose, compared to current DEWALT nailers, and no need to compress the contact trip to actuate the tool
• Long-life, maintenance-free motor helps to keep from staining the work surface
• Tool-free jam release mechanism for easy nail removal
• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is the nail recommended for this tool easy to find, is there troble in finding nails for this tool
Answer:	"DA" angled finish nails are 35 degrees.
Question:	Is it a pneumatic tool
Answer:	Yes, because these nails are DA-style (34° angle), just like the Bostitch btfp72155.
Question:	Is the dewalt dwfp72155 15 gauge a 34 degree nailer
Answer:	Traditional Bostitch's FN style (25 degrees) is unique to its brand. However, the newer Bostitch DA style (34 degrees) of finish nailer will work with the corresponding angled finish nails.
Question:	What about recoil
Answer:	I would call a local tool repair shop. Unless you acsess the parts detailed list online at Hitachi website.

Product description

The 16-Gauge Finish Nailer NT65M2S features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2S accepts 16-gauge finish nails in lengths ranging from 1" Up to 2-1/2" And is equipped with Metabo HPT signature air Duster button to conveniently blow away dust and debris instantly to clear the work surface.

• FASTENERS: 16-gauge finish nails in lengths ranging from 1-in up to 2-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 3.7 lbs and well-balanced for minimal fatigue and increased maneuverability
• DEPTH ADJUSTMENT: Tool-free depth of drive adjustment helps to provide a professional finish when fastening into varying materials
• APPLICATIONS: Ideal for installing molding, chair rail, cabinetry and other fine finish applications
• EXHAUST PORT: 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use

User questions & answers

Question:	what all comes in the box
Answer:	2 inch
Question:	Benden refacciones de esa pistola
Answer:	I use 16 gauge finishing nails! I’ve used nails from 1” inch up to 2” nails. Had this tool for a year and love it! I use dewalt brand, but other brands will work! The gun will specify what gauge such as 16 in this case!
Question:	Is the no-mar tip removable where the no-mar tips is not needed for work other than finish work
Answer:	Yes in the first 30 days. Other than that no warranty
Question:	What type of air compressor should I buy to use with this
Answer:	This is more than a brad nailer. It does 16 ga finishing nails up to 2-1/2 inch in length. I used it for nailing the baseboard in my house.

Product features

Tool-less, Easy-to-Clear Nose

For quick and simple nail extraction should a nail jam during use

360 Degree, Fully Adjustable Exhaust Port

Directs air exhaust away from the user during use

Ergonomically Designed Simple Flip Actuation Switch

For easy transitions between bump fire or sequential fire modes

Factory Installed Air Fitting

Is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

The Makita 15 gauge angled finish nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. Angled finish nails sized 1-1/4" to 2-1/2". the nail Lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air Duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

• Powerful motor drives 15 gauge "DA" style angled finish nails from 1-1/4" to 2-1/2"
• Magnesium body, aluminum MAGAZINE and cylinder deliver strength and durability
• "Tool-less" depth adjustment for more precise flush and Countersink nailing
• Nail lock-out mechanism protects tool and work surface from dry-fires
• Built-in air duster provides convenient air flow to clear work surface

User questions & answers

Question:	Need to replace nail set
Answer:	Not sure what that means. But don't buy that nail gun! You end up having to set one-third of the nails by hand and that's annoying
Question:	Will this shoot 16 gauge nails too
Answer:	No, it is designed for only 15ga nails
Question:	Anybody has the bare gun weight
Answer:	Specs say 4 lb but it feels much lighter and has great power. Been a loyal Senco finish nailer user for years but this is a much better nail gun especially for the price.
Question:	Are these 34* nails hard to find in say, a big box store??? I cant even find them on Amazon and thats my only concern is not finding the right nails
Answer:	I ordered Senco A302000 15 gauge 2 in. and Senco A302500 15 gauge 2 1/2 in. that work fine. These were recommended by Amazon. Some nail guns are 33 1/3 degree and some are 34 degree. Not much of a difference there.

Product features

Makita AF635 15 Gauge, 2-1/2" Angled Finish Nailer, 34⁰

The Makita 15 Gauge Angled Finish Nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. angled finish nails sized 1-1/4" to 2-1/2". The nail lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Includes:

3 Year Warranty

Pnewumatics - 3yr. Warranty

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges. The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. Kit includes: PCC792 Nailer, PCC680L Battery, PCC691L Charger.

• 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails

User questions & answers

Question:	where can you find extra batteries
Answer:	The short answer is extra batteries should be available from the place you got the tool. The longer response would be Amazon or big retailers such as Lowes and Home Depot.
Question:	I'm installing pine flooring (softer wood) will this tool get the job done
Answer:	yes you can set the impact for thickness and hardness of wood
Question:	Is it more powerful than the Arrow 200 Electric brad nailer? And does the battery charger have trickle charging
Answer:	I have had 2 different electric nailers. Also have had and still use two 18 volt 18 gauge nailers. One is a combo brad/staple nailer. I must say this 16 gauge Porter-Cable is the most powerful nailer I own. It does have a trickle charge as well. This a GREAT nailer.
Question:	Is there a roofing nail available with this gun
Answer:	No, it uses 16 gauge brads only. You would need a specific roofing nail gun.

Product description

This 3PLUS Angle Finish Nailer drives 15 gauge 1-1/4” to 2-1/2” strip angle finish nails. It targets for many different finish work applications, can be used for the installation of crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. With 34-degree magazine angle, it allows the user to reach into corners or tight spaces with ease. Its durability, precision nail placement and reliable nail driving power would help you complete job efficiently.

• Uses: 1-1/4" to 2-1/2" 15-gauge "DA" style angled finish nails
• Tool-free depth adjustment for flush fastening into varying material for improved control and a professional finish
• Work Contact Element prevents accidental firing. A no-mar tip protects work surface from any unwanted damage
• 360° fully adjustable exhaust portal directs air exhaust away from the user or work piece. Quick clear jam release functions for easy maintenance
• Interchangeable trigger for single shot or bumper fire function

User questions & answers

Question:	Anyone know the website of the manufacturer of this website that could provide me a user guide/manual for this item? There was not one in the box
Answer:	You can’t adjust the pressure but you can adjust how far the nail goes into the wood. It is a dial that you turn to adjust that.
Question:	Description states it uses two sizes, 1 1/4-2 1/2 and 1 1/4-3 1/2. Which is correct
Answer:	Yes black battery works
Question:	No instructions for oiling. I own 4 different nail guns, they use 1 to 5 drops of oil depending on gun. The manual gives no instructions
Answer:	No, it is recommended to only use Finish Nails in the PCC792B.
Question:	What PSI does this need to operate
Answer:	Also - be careful to keep the 18 Ga nails clearly marked and separate from the 16. I have mistakenly loaded 18s in, and its quite a job to get them out of the tool afterwards.

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Compatible with all DEWALT 20V MAX* batteries
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question:	Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer:	THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question:	Is this the same battery of 20v max drill
Answer:	Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question:	Please confirm this kit includes the charging unit, battery and bag
Answer:	Mine came w/ those items since it is a kit & not tool only.
Question:	Can i nail 2x4 with this im building a garage
Answer:	Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.

Product description

The Senco 15-Gauge Angled Finish Nailer has established itself as a marquee tool for the professional finish carpenter. This tool offers superb durability and superior performance, great for a wide variety of finish and trim applications. Featuring a comfort grip for easy handling, the nailer is crafted with a rugged internal design along with magnesium to make it lightweight yet tough.

Designed for the unique demands of dedicated professional use, the Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer is packed with the powerful, innovative features you need to tackle virtually any job. It features a balanced, ergonomic design and lightweight construction that help minimize wrist and arm fatigue, so you can get more done in less time.

• Anti-lube design eliminates the hassle of maintenance
• Magnesium-coated design resists scratches
• Smooth finish makes it easy to paint
• Rugged internal engine offers lasting durability
• Great tool for professional finish carpenters

User questions & answers

Question:	Does this come with a case
Answer:	No. It uses a build-in battery.
Question:	Metal or plastic body housing
Answer:	Metal push button. Same as the flashlight body.
Question:	Will this dry fire
Answer:	Only at about 6-7 charges.......so I cannot help with this question Maybe someone will be able to answer your question that has had it long enough for 500 charges This is a Great little lite though in my opinion My other lites have to have the batteries removed and put in charger and back in at home,,,,,, where this light is more portable to charge. Thank You and have a great day
Question:	The listing for this gun shows both last year's model in gray, and the new red model. Which do you receive if you order now
Answer:	We aren't able to attach pictures, but there is a velcro strap on the back of the holster that will fit to most belts.

Product description

RYOBI P325 18-Volt ONE+ AirStrike 16-Gauge Cordless Straight NailerCordless power drives up to 800 nails per chargeNo compressors, hoses or pricey gas cartridges requiredProvides optimum convenience and performance

• AIR PRESSURE ADJUSTMENT: A switch on the back of the unit allows you to increase the depth of your nail driving
• LED LIGHTING at the head allows you to see the job while you’re working in dim conditions. It can be activated by a separate trigger, too, which keeps you safe from accidentally firing off nails when you don’t want to
• LOW NAIL INDICATOR: Help prevent against dry firing by knowing that you need to replace the clip before you damage your woods
• TOOL-FREE ADJUSTMENTS: Knobs can adjust your depth, and you can flip out the front end to clear nail jams
• ONE+ COMPATIBLE: This tool is part of the One+ family, which means you can use this with Ryobi’s 18V batteries, including the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Is this normal? I laid it flat on the floor overnight and when I checked in the morning there were some lubricant that oozed out on the motor side
Answer:	I too had some lubricant that was oozing out of mine. I would drop a few extra bucks and get the DeWalt....my Dewalt works perfectly every single time and doesn't make a mess.
Question:	How is this on hard wood like oak
Answer:	It works just fine on oak and every other wood I've tried.
Question:	Will this wotk with p191 3.0 ah lithium+ hp high capacity batteries
Answer:	In general any 18V ONE+ battery works with any 18V ONE+ compatible tool. As noted, this particular ASIN is TOOL-only and does not include the battery or charger). The tool is for use with ONE+ 18V nickel-cadmium and 18V lithium-ion battery packs. See tool/appliance/battery pack/charger correlation supplement 987000-432.
Question:	whats the difference between this tool and Ryobi Cordless BRAD NAILER 18GA Model P
Answer:	The main difference is between the nails that this and the P320 take. The P320 takes 18 gauge brad nails and this tool takes larger 16 gauge finish nails. Functionally, the smaller brad nails have less holding power but are less visible since they have a smaller head. The larger brad nails are good for things such as base-boards but are more than you would generally need for things such as trim. In my research, I was told several times that if you are only going to get one nailer, get the larger 16 gauge finish nailer. This is because you can still the 16 gauge for trim (it just needs some caulk to cover the holes) but you generally cannot use the smaller 18 gauge brad nails for things that require more power (like base-boards).

Product description

The NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is ideal for applications such as decorative trim, furniture trim, rail molding, crown molding, window casing, door installation, base boards, chair rails, picture frame assembly, and hobbies and crafts. Compatible with 16 gauge straight finish nails from 1" to 2-1/2", This air powered nail gun features a quick jam release for fast clearing in the event of a jammed fastener, along with a tool-free finger depth adjust for various applications. An ergonomically engineered die cast aluminum body makes this rugged and lightweight finish nailer easy to operate over extended periods of time. The comfort grip handle and No mar safety tip ensure great results by increasing precision and preventing damage to your working surface. A one piece drive blade of hardened steel adds to the durability of this nail gun. Air tool oil and adjustment tools are included. The Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is an essential tool for DIYers at home as well as professional contractors at the job site.

• Nailed It: This pneumatic 16-gauge straight finish nailer features a lightweight and durable aluminum body, and an ergonomic comfort grip handle. A no mar tip prevents dents and dings, and the quick jam release lets you easily clear jams without taking the nailer apart.
• Many Uses: This finish nail gun is great for interior and exterior finish and trim, furniture, cabinet work, staircases, base boards, shoe and crown moulding, window casing, and chair rail moulding. Sequential firing and tool-free depth adjust allow you to customize for any project.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Would this gun work for face nailing 3/4" Oak hardwood floors
Answer:	There are 2 light kits that will match the oil rubbed bronze finish of your fan, however it may not be 100% match but it is the closest to it. The part numbers are ; 77850 & 77846. Unfortunately, it is not remote control adaptable.
Question:	can you use 2" or 1-1/2" 16 gauge finish nails in addition to the
Answer:	These are ABS resin blades (acrylonitrile butadiene styrene).
Question:	Can you use 18 gauge nails
Answer:	There are a number of down rods that can give different hang lengths
Question:	Does this tool require an air compressor
Answer:	Approximately 11” diameter

Product features

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!