12 best ga nail gun
A GA nail gun, often referred to as a gas-actuated nail gun, is a type of power tool commonly used in construction and carpentry for fastening materials together. It is related to brad nailers, which are a specific subtype of nail guns.
Here are some key features and information about GA nail guns:
Operation: GA nail guns use compressed gas, typically propane or butane, to drive nails into various surfaces. They are often cordless, relying on a fuel cell and battery for power. When the trigger is pulled, the gas ignites, creating a rapid burst of force to propel the nail into the material.
Brad Nailers: Brad nailers are a type of nail gun that uses very thin nails, called brads. These nailers are designed for precision work, such as attaching trim, molding, or delicate wood pieces. GA nail guns can be adapted to use brads, making them versatile tools for different applications.
Nailers and Staplers: Nail guns like GA nailers are available in various configurations, including those that can drive both nails and staples. Some models offer adjustable depth settings, allowing users to control how deep the nails or staples are driven into the material.
Power Tools: GA nail guns are classified as power tools because they rely on compressed gas and electricity (for ignition and controls) to perform their tasks.They are known for their efficiency and speed when compared to traditional manual nail-driving methods.
Safety: Safety is a crucial consideration when using GA nail guns. Users should always wear appropriate safety gear, including eye protection and hearing protection, as these tools can generate noise and flying debris. It's essential to follow the manufacturer's instructions and maintain the tool properly.
Applications: GA nail guns are commonly used in construction, woodworking, and DIY projects. They are ideal for tasks such as framing, sheathing, roofing, and finishing work.
Types of Nails: Depending on the specific GA nail gun model, various nail lengths and types can be used. This flexibility allows users to adapt the tool to different projects and materials.
In summary, GA nail guns are versatile power tools that use compressed gas to drive nails or staples into various materials. They are commonly used in construction and woodworking for their speed and efficiency, with brad nailers being a specialized subtype designed for precision work. Proper safety precautions should always be taken when using these tools to prevent accidents and injuries.
Below you can find our editor's choice of the best ga nail gun on the market
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
PORTER-CABLE
Product description
The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.
- NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
- CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
- INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
- BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
- 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.
User questions & answers
| Question: | Does this come with a charger |
| Answer: | This one does come with a battery & charger, but they sell a model without a charger |
| Question: | Would this tool work to repair my fence |
| Answer: | Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too. |
| Question: | Will it go through 1" oak trim |
| Answer: | yes |
| Question: | can i use multiple lengths of nails |
| Answer: | 5/8 inch through 2 inch nails....awesome gun...i am so happy with it |
Hilti 274638 GX120 Gas Actuated Fully Automatic Fastening Nail Gun Package
HILTI
Product description
Gas powered tool is the ulitmate in mobility with no need to worry if your electricity source is close as there is no battery to charge. Slim, streamlined design allows easy access close to walls or in corners. Fully automatic electonic gas injection system for consistent fastening. Easily adjustable tool nose with one lever for optimum fastening quality.
Perfect for attaching drywall track to concrete, concrete block and steel.
- Drives 750 fasteners with a single gas can
- Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
- Includes tool, 1 GX 120 nail punch set and z case
- Voltage: 110.0
User questions & answers
| Question: | Does this package come with nails please |
| Answer: | yes ,comes with 2 gas and 2000 nails , |
| Question: | How much for a used hilti gun a gx |
| Answer: | There should be a big influx of availability with Hilti replacing them with a newer model. Tough call on value of a used. So many variables. Maybe 60 to 65% of new. |
| Question: | how many inches are the pins for this track fast |
| Answer: | .5" for steel, .75" for concrete. These are for a Hilti. I don't know if a Fast Track uses the same, though I suspect it would. |
| Question: | Will this gun be able to nail 2"x4" to a concrete floor |
| Answer: | Actually this gun is only meant for metal track instead of 2"x4". For commercial construction because nails only come in 3/4" up to 1 1/2". |
Hitachi Gas Powered 18-Gauge Straight Brad Nailer
Product description
Hitachi NT50GS 18-Gauge 2-Inch Cordless Gas Powered Straight Finish Nailer
From the Manufacturer
The Hitachi NT50GS 18-Gauge 2-Inch Cordless Gas Powered Straight Finish Nailer may be used in a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim. This nailer fires nails from 5/8-inch to 2-inch in length and powered by a gas fuel rod and Lithium-Ion battery, allowing the user to easily move around without hoses or compressors. The fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle and the double lock fuel compartment will latch securely and keep the fuel rod seated firmly. This nailer is will fire up to 2,000 fasteners per charge. Designed to be compact, the NT50GS weighs only 4-pounds for optimal balance, ease of maneuverability and reduces user fatigue. The tool features an elastomer grip to provide comfort and a secure grip, a quick clear nose with tool-less jam release to reduce down time, tool-less depth adjustment for flush drives into a variety of surfaces and a reload indicator for easy visual recognition of low nail quantities to avoid dry firing. The variable position hook will accommodate either left or right handed users and the low battery indicator light alerts the user of battery status to prevent unexpected downtime. Included with the NT50GS are 3.6-volt Lithium-Ion batteries, 1-hour charger with AC/DC adapter (both car and wall charger adapter), carrying case, a 4mm and 3mm hex bar wrench, no-mar tip and safety glasses. The Hitachi NT50GS 18-Gauge 2-Inch Cordless Gas Powered Straight Finish Nailer is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 1-year from the original purchase date. Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- Compact and lightweight for optimal balance, ease of maneuverability and less user fatigue
- Quick clear nose with tool-less jam release reduces down time
- Tool-less depth adjustment for flush drives into a variety of surfaces
- Reload Indicator for easy visual recognition of low nail quantities to avoid dry firing
- Comes with a 1-year limited warranty
- Compact and Lightweight for optimal balance, ease of maneuverability and less user fatigue
User questions & answers
| Question: | where do you purchase gas cartridges |
| Answer: | Homedepot, paslode short gas cartridge |
| Question: | Is this a bare tool, or does it come with batteries (and charger?)? Descriptino indicates both |
| Answer: | Mine came with one battery and charger but I also have the angled one and that came with two just a tip you can use any named co2 but make sure that the nails you use have you model I just order the Hitachi nail but very important to use the right gage nail and your model number nail ive have for a year and I oil it be for every use ans never had a jam yet I love them great tool |
| Question: | How do you turn it off!!!! Do you have to take the battery completely out |
| Answer: | Yes you should store the batteries just like it was when you received it it the battery storage slots in the case |
| Question: | Where do I get the nails |
| Answer: | I have that same gun. I am not too happy with it. Jams. A lot. Anyway you can get (18 gauge ) nails anywhere from home d. To lowes etc. make sure they are 18 gauge and I believe that gun only will except up to 2"or 2-1/2" size nails . When you buy the cylinders ( gas ) look carefully at the base for the exp. date cause it can and will become a problem |
Hitachi NT65GAP9 15 Gauge 2-1/2-Inch Gas Powered Angled Finish Nailer (Discontinued by the Manufacturer)
Metabo HPT
Product description
Hitachi NT65GA 15-Gauge 2-1/2-Inch Cordless Gas Powered Angled Finish Nailer
From the Manufacturer
The Hitachi NT65GA 15-Gauge 2-1/2-Inch Cordless Gas Powered Angled Finish Nailer may be used in a variety of applications including installation of door and window casings, cabinets and decorative molding. This nailer fires 34-degree 15-gauge nails from 1-1/4-inch to 2-1/2-inch in length and powered by a gas fuel rod (sold separately) and Lithium-Ion battery, allowing the user to easily move around without hoses or compressors. The fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle and the double lock fuel compartment will latch securely and keep the fuel rod seated firmly. This nailer is will fire up to 2,000 fasteners per charge. Designed to be compact, the NT65GA weighs only 4.4-pounds for optimal balance, ease of maneuverability and reduces user fatigue. The tool features an elastomer grip to provide comfort and a secure grip, a quick clear nose with tool-less jam release to reduce down time, tool-less depth adjustment for flush drives into a variety of surfaces and a reload indicator for easy visual recognition of low nail quantities to avoid dry firing. The variable position hook will accommodate either left or right handed users and the low battery indicator light alerts the user of battery status to prevent unexpected downtime. Included with the NT65GA are 3.6-volt Lithium-Ion batteries, 1-hour charger with AC/DC adapter (both car and wall charger adapter), carrying case, a 4mm and 3mm hex bar wrench, no-mar tip and safety glasses. The Hitachi NT65GA 15-Gauge 2-1/2-Inch Cordless Gas Powered Angled Finish Nailer is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 1-year from the original purchase date. Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- Lightweight at only 4.4 lbs for balance, maneuverability and minimal user fatigue and ideal for overhead and extended use applications
- Quick clear nose with tool-less jam release for easy maintenance and reduced downtime
- Detachable no-mar nose cap protects work surfaces from scratches or indentations and conveniently snaps onto the side of the magazine for storage
- Tool-less depth of drive adjustment for flush drives into various materials
- 1-Hour AC/DC charger with adapters for charging in standard wall outlets or in the car
- Lightweight at only 4.4 lbs for balance, maneuverability and minimal user fatigue and ideal for overhead and extended use applications
User questions & answers
| Question: | where do you get gas cartridge |
| Answer: | I was able to purchase them at Home Depot. The gas cartridge fit multiple models of nail guns. As it had different adaptor heads in the package. They work fine. Sorry, don't remember the brand. |
| Question: | Should I buy a 15 or 16 gauge Hitachi Nailer |
| Answer: | I would suggest that you go to a local hardware store and take a look at the size of the nails that go into a 15 or 16 or even 18 gauge Nailer. Smaller the number, thicker the nail. So depending on what your need is, your nailer requirement might change. |
| Question: | Can this operate with out the gas |
| Answer: | This not only canNOT operate without the gas, it does NOT operate WITH. After struggling to get one shot off, I sent it in for servicing at a Hitachi tool repair place. It was returned after 4 or 5 weeks, still inoperable. Save your money, buy a newer style and different make nail gun. |
| Question: | Will any pneumatic oil work in place of the Hitachi brand |
| Answer: | Good Morning Matt, Hitachi only recommends their brand. We are unable to advise outside of their recommendation. Thanks! |
Rrtizan Brad Nailer, 2-in-1 Pneumatic Nail Gun, 18-Gauge 3/8” to 2”, Depth Adjustment, Longer Visual Nail Indicator Staple Gun for Upholstery and Home Improvement.
Product description
2 in 1 Brad Nailer
- 【2 in 1 Staple and Nail Gun】: The Brad Nailer magazine drives both 18 gauge pneumatic brad nails and crown staples, making this a highly versatile tool,suitable for upholstery, wooden handiwork and home improving project. Compatible with 5/8”-1-5/8" staples and 5/8”-2" nails.
- 【Adjustable Depth】: Equip with depth adjustable knob, Rrtizan staple gun can adjust the depth of the nail, which can meet the different needs of your work and accomplish the task better.
- 【Outstanding design】: Convenient magazine release latch for quick reloading. 360 degree adjustable exhaust to make sure the vent is not towards the user when using. Nail reload indicator visual nail reload indicator, located on the magazine, avoid user use the blank drives. Tool-free jam release Latch for easy nail removal.
- 【Easy to use】: Just put the nail into the magazine, connect the gas compressor, adjust the depth adjustable knob, and you can use it. The sturdy aluminum body can greatly increase the life of the nail gun. Working pressure: 70-100PSI, Maximum pressure: 120PSI, Nail capacity: 100.
- 【Rrtizan Customer Service】- We offer a full satisfaction guarantee on every one we sell! If you have any questions, please feel free to contact us and we we will reply within 24h.
User questions & answers
| Question: | Can you use 18 gauge staples |
| Answer: | Yes, compatible with 5/8”-1-5/8" staples and 5/8”-2" nails. |
| Question: | Does it arrive with accessories such as staples/nails, carrying case etc |
| Answer: | No |
Paslode, Cordless XP Framing Nailer, 905600, Battery and Fuel Cell Powered, No Compressor Needed
Paslode
Product description
The cordless XP framing nailer system is designed to deliver 15% more power to increase productivity. Less standing nails and better drive performance into harder woods means you can put your hammer away and let this cordless nailer do it all. Plus, the new Paslode framing fuel with all season formula lets you keep working in temperatures down to 14⁰F when compressor hoses are freezing. The lightweight Paslode cordless XP framing system offers the nailer, nails, and fuel so you enjoy the power to drive non-stop nailing all day, every day.
- Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
- All Season Formula - Works in temperatures down to 14°F.
- Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
- Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
- Compact Design: Fits between 16" o.c. studs, joists and roof trusses.
User questions & answers
| Question: | Dumb question: is the charger included (no mention specifically of same |
| Answer: | This framing nail does not work with plastic collated nails. This model requires clip head or offset round paper collated nails. If you need the one that uses round head plastic collated nails, you will need model NR1890DR or NR1890DRS. |
| Question: | What gas cart is used |
| Answer: | This tool is not made in the USA. |
| Question: | is the nails for this gas nails the same as the air nailer? i will be using both together |
| Answer: | First, a reminder that this version of the nailer is only made to shoot papertape nails, 30-34 degree. If the nails you have are trul plastic collated them they are 21 degree and will cause damage. After making sure you have put in the correct nails, there are two buttons right by the bottom of your hand when holding the tool. One is on/off, and the other changes from sequential mode to bump mode. Press and hold the on button till a green light comes on, then operate. |
| Question: | What is the largest length nail that can be used with this gun? I'll be doing some floor plates in a remote location, so probably need at least |
| Answer: | In most cases you shouldn't have any problems with this. |
Milwaukee 2746-20 M18 FUEL 18 Gauge Brad Nailer (Tool Only)
MILWAUKEE'S
Product description
The MILWAUKEE M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day.
- This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box
User questions & answers
| Question: | How many year warranty for this item |
| Answer: | I have been told the 5 year warranty does not apply if it comes in an unmarked box...which it says is the case in the description...along with it being refurbished |
| Question: | What length nails does it take |
| Answer: | Hello, 5/8 to 2-1/8 nails. Thanks |
| Question: | How wide is the dent in the wood around the nail when sinking below the surface |
| Answer: | If it is adjusted right, no dent |
| Question: | What are the recommended nails (size and other criteria) to use with this tool? I Milwaukee cust service this week and got no response |
| Answer: | Nail Gauge 18. Maximum Fastener Size : 2-1/8 in Minimum Fastener Size : 5/8 in |
CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)
Craftsman
Product description
This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.
- CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
- Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
- Provides consistent firing power in various climate conditions and materials
- Tool-free depth settings for quick set up and consistent results
- Tool free jam and stall settings for ease of use and improved efficiency
- Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
- Contoured overmolded handle for added comfort during use
User questions & answers
| Question: | Will DeWalt battery work |
| Answer: | No, the CMCN618C1 should only be used with the CRAFTSMAN battery. |
| Question: | Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks |
| Answer: | Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!! |
| Question: | Can this tool work with the Black and Decker 20 volt battery for the Matrix system |
| Answer: | No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible. |
| Question: | Does this unit come with a battery and charger |
| Answer: | Yes, The CMCN618C1 comes with one battery and one charger. |
DEWALT 20V MAX Framing Nailer Kit, 30-Degree, Paper Collated (DCN692M1)
DEWALT
Product description
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
- Tool-free selector switch for sequential or bump Fire modes
- Tool-free depth adjustment for precise nail placement
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
User questions & answers
| Question: | is it possible to use this nailer on dry wall |
| Answer: | Yes you can. Just use a smaller nail and adjust the depth. |
| Question: | Biene con cargador |
| Answer: | Si pero esta herramienta es muy mala mo la recomiendo |
| Question: | Do I need the two speed? Those who have the two speed, do you use the second one that is not on the 690? Thanks |
| Answer: | Yes. The 2 speed is worth the extra money |
| Question: | will this do framing, finishing and brad nails |
| Answer: | Only framing nails |
DEWALT Brad Nailer Kit, 18GA, 5/8-Inch to 2-Inch (DWFP12231)
DEWALT
Product description
The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.
- Long life maintenance-free motor to keep from staining the work surface
- Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
- Tool-free jam release mechanism for easy nail removal
- Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
- Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
- Compressor is required to use this product but is not included
User questions & answers
| Question: | Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need |
| Answer: | : A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one |
| Question: | What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor |
| Answer: | Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done. |
| Question: | Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools |
| Answer: | Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use. |
| Question: | what is the voltage |
| Answer: | The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps. |
Product features
DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit
MILWAUKEE ELECTRIC TOOL 2745-20 M18 Fuel 30 Degree Framing Nailer
MILWAUKEE'S
Product description
The MILWAUKEE M18 FUEL 30 Degree Framing Nailer sets the new standard for cordless framing nailers. By leveraging a nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence, this nailer provides users with pneumatic performance and the convenience and freedom of cordless power. Delivering the power to sink full round head nails into dense engineered lumbers, this framing nailer enables users to tackle even the most demanding framing applications. To keep users productive and efficient throughout the day, the framing gun fires 3 nails per second with zero ramp-up time, meaning a nail is fired as soon as the user pulls the trigger. Additionally, the cordless framing nailer operates using only Milwaukee's REDLITHIUM Batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost and hassle of gas cartridges and maintenance associated with competitors nailers.
- Included: On board hex key storage, No-mar tip, Rafter hook, Belt hook
- Includes: M18 FUEL 3-1/2 -inch 18V 30-Degree Framing Nailer 2745-20 (Battery and Charger sold separately)
- Sequential and contact actuation firing modes
- Zero ramp-up time
- Dry fire lockout
User questions & answers
| Question: | Will this nailer work with paslode nails [30 degrees] |
| Answer: | Sounds like you need to buy a charger for the computer. This is a replacement battery for the computer. It replaces the battery unit that came in the computer originally. |
| Question: | Include a battery |
| Answer: | Call amazon and tell them what your problem is |
| Question: | Is this compatable with full head nails |
| Answer: | Yes, I have the same model Inspiron. |
| Question: | Does this nailer fire full head nails |
| Answer: | Thank you for inquiring our M5Y1K Laptop Battery Compatible with Dell Inspiron 40Wh 14.8V. You can fully charge your battery and test the using time of it. Normally, a healthy battery can last about 2 hours, if your original battery can not meet it. Maybe you need a new replacement. If convenience, you should active it at first. Please discharge all the remaining power and recharge it for continuous 8-12 hours. And then discharge and charge 8-12 hours again, just do it for 2 or 3 cycles, so that it can be activated completely. In addition, there are many different batteries can work for Dell 15 Inspiron 5000 series, please make sure your original battery is M5Y1K battery before you buy it. This M5Y1K battery fits 6YFVW VN3N0 GXVJ3 W6D4J HD4J0 4WY7C, and can work for Dell Inspiron 14 15 17 3000 5000 Series, 5558 5559 3521 453-BBBR 3452 3451 3458N 3567 5755 5758 5759 and so on. |
Paslode, Cordless Brad Nailer, 918100, 18 Gauge, Battery and Fuel Cell Powered, No Compressor Needed
Paslode
Product description
When you need precision in tight spaces, reach for the Paslode 18 Ga. Cordless Li-ion Brad Nailing system. At 4.25 lbs., this is the lightest Cordless Brad Nailer on the market. Designed for fine trim applications, it leaves only a small hole in detailed trim work. This cordless nailer gives you great maneuverability to place the nail exactly where you want it wherever you're working: overhead, on ladders, or on your knees. Our cordless nailer, brad nails, and fuel cell are designed to work together so you can fasten with precision, finish without fatigue
- Easy Access - Provides superior access by reaching directly into tighter spaces.
- Consistent - Drives each nail flush into all trim for high-quality craftsmanship.
- Lightweight - The lightest Cordless Brad Nailer on the market for reduced fatigue and increased productivity.
- No Downtime - Paslode provides non-stop nailing with fuel that will last a full day.
- Durable - 7.4-Volt Li-ion battery drives up to 12,000 nails per charge; 1-1/2-hour full charge; 2-minute quick charge for up to 200 extra shots.
User questions & answers
| Question: | Does it come with 2 batteries |
| Answer: | Yes it is, it just unscrews. If your going to bore into something that needs the power this drill has that handle might keep you fromgetting injured, boy this thing really has power. If you put it in a bind something is going to give. Great drill used one for 25 years. |
| Question: | Does this use staples too |
| Answer: | I bought one a couple months ago and it was made in Japan. It is a really nice drill lots of power, smooth, and quiet. I think you will be very happy with it. |
| Question: | Can this shoot a 3" pin nail |
| Answer: | No its a rocker trigger forward & reverse with no trigger lock |
| Question: | Does it take the same battery as the 16 gauge |
| Answer: | I don't know the torque in numbers. You have to really have a strong grip on the extended handle and good stance with your feet. If the drill bit hits some tough going it will pull loose from your hand if you don't. If you don't have a good stance with your feet it will twist your body so much you will lose your balance. Very powerful drill. |
Latest Reviews
View all
Lightweight Vacuum Cleaners
- Updated: 10.03.2023
- Read reviews
American Nonfictions
- Updated: 15.03.2023
- Read reviews
Brass Cleaner For Reloading
- Updated: 06.03.2023
- Read reviews
Simpli Home Mirrors
- Updated: 24.05.2023
- Read reviews
Depend Adult Diapers
- Updated: 28.02.2023
- Read reviews