11 best canvas prints shop nail guns

Product description

The Metabo HPT 18V Cordless Paper Strip Framing Nailer NR1890DCS completely raises the bar for cordless framing nailers.



This cordless framing nailer is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nalier, but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer best of all, there is no refilling of the air tank required.



This cordless framing nailer is ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite for quick in-and-out operation with minimal hassle and professional results.

• INCLUDED: 18V Cordless Paper Strip Framing Nailer
• CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom
• FASTENERS: Accepts 30 degree clipped or offset round head nails from 2-In to 3.5-In length for jobsite versatility
• POWER: Drives 400 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
• APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose
• DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment
• PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer

User questions & answers

Question:	It works whit a plastic strip
Answer:	No. 2 completely different cameras. Yours I believe is a 20MP, the w80 is a 7MP. Also your battery is a BN1, not BG1
Question:	This item made in usa
Answer:	Not sure, is your item a Sony, first of all, and second, look at your battery that is already in your camera and see what the # is on the actual battery. That is how I knew it would fit mine. there is a number on the battery itself and that will confirm if it will fit.. thank you - if it does fit your camera, you will not regret getting this.. I love it; and the battery life is so much stronger .... and I love that you can charge the batteries in your vehicle on the car charger!!! it is simply the best thing!!!
Question:	I bought this gun i charged the battery and i put in 30 degree plasic strip nails and its not shooting. Whats going on
Answer:	I’m not sure. The bottom of my camera where battery goes says 3.6 v so check your camera. I don’t have my original battery to check.
Question:	Does it sink nails in engineered lumber
Answer:	You can plug the charger into a wall outlet or into the power outlet in a car. However make sure that for the sony batteries you turn them over when you plug it into the charger . This means the rounded sides are down and the rear of the battery is up. Otherwise the batteries will not charge. Other than that Ihave used the batteries since January and they work well.

Product description

The Framing Nailer NV90AG(S) drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7. 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• FASTENERS: Accepts 16° +/- 1 wire coil nails from 1-3/4-in - 3-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• TRIGGER: Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• LIGHTWEIGHT: At only 7.7 lbs, it is easy to use all day

User questions & answers

Question:	can you get a rubber tip for it
Answer:	The tool is 9.95 lbs. with out the battery and 11.37 lbs with the battery.
Question:	What are the minimum and maximum nail diameters for this gun
Answer:	The F-35XP would only be compatible with paper tape collected 30-34 degree nails.
Question:	No trabaja con compresor de aire? Dice electrico
Answer:	The F-35XP drives off-set full round head and clipped head paper tape collated 30 to 34 degree angle framing nails from 2" to 3-1/2" length range.
Question:	Why the name change? Did Hitachi develop a bad reputation or something
Answer:	It can take 30° - 34° paper tape clipped heads

Product description

The NR83A5 Full Round Head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and Mobile home and modular home construction. The NR83A5 is like the original NR83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A.The NR83A5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.Operating Pressure : 70-120psi

• Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
• Cylinder valve drive system for rapid response and increased durability
• Selective actuation on trigger allows for either sequential or contact nailing
• Rafter hook is included for convenience on the jobsite
• Tool-less depth of drive adjustment for improved control and flexibility when fastening into various types of wood
• Equipped with an industrial 2-piece magazine that can withstand jobsite abuse
• Accepts two strips of nails at a time and locking feeder system makes replenishments quick and easy
• Open nose design for easy extraction of a jammed nail

User questions & answers

Question:	Is this unit easy to use
Answer:	Yes
Question:	this is a pneumatic nailer that is corded. the picture shows a air connection to put air to it. is the information you show as corded incorrect
Answer:	You may have mistaken the air hose for an electrical cord. In 40 years in this line of work, I've never seen both air hose and a power cord connected to any pneumatic tool.
Question:	Can. You shoot clipped head nail in it
Answer:	Hi there. This nailer only accepts full round head nails. Hope this helps!
Question:	Where is it made
Answer:	At Hitachi Factory

Product features

Depth Adjustment

Included for convenience on the jobsite

Selective Actuation

On the trigger allows for either sequential or contact nailing

Ergonomic Non-slip Rubber Grip

On the handle helps maintain a secure hold and comfort during use

Lightweight and Well-balanced

For easy maneuverability

Product description

The NR90ADS1 Framing Nailer drives paper collated nails from 2" up to 3-1/2" In length and features Metabo HPT next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
• LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
• NEW HEAD GUARD DESIGN: Allows for quicker disassembly during tool maintenance

User questions & answers

Question:	Does this use the Paslode paper collates nails
Answer:	Yes
Question:	can someone link nails they purchased for use with this gun? Looking for 3" to frame basement
Answer:	Hi. I've used Paslode nails, with the framer. Check the nail gun to see if it requires "paper collated", or "plastic-collated" nails, Otherwise they should be ok. Disclaimer: I've only used nails up to 2.5" long.
Question:	The picture shown is for model nr 90ae{s1} look at the model number on the nail magazine
Answer:	Yes that will tell you size angel and degree you need
Question:	does this have an adjustable exhaust system
Answer:	The exhaust port pivots so you can keep it from your face. Even if you catch the exhaust, the paper collating strip doesn’t pepper you like the plastic type.

Product description

The 16-Gauge Finish Nailer NT65M2S features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2S accepts 16-gauge finish nails in lengths ranging from 1" Up to 2-1/2" And is equipped with Metabo HPT signature air Duster button to conveniently blow away dust and debris instantly to clear the work surface.

• FASTENERS: 16-gauge finish nails in lengths ranging from 1-in up to 2-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 3.7 lbs and well-balanced for minimal fatigue and increased maneuverability
• DEPTH ADJUSTMENT: Tool-free depth of drive adjustment helps to provide a professional finish when fastening into varying materials
• APPLICATIONS: Ideal for installing molding, chair rail, cabinetry and other fine finish applications
• EXHAUST PORT: 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use

User questions & answers

Question:	what all comes in the box
Answer:	2 inch
Question:	Benden refacciones de esa pistola
Answer:	I use 16 gauge finishing nails! I’ve used nails from 1” inch up to 2” nails. Had this tool for a year and love it! I use dewalt brand, but other brands will work! The gun will specify what gauge such as 16 in this case!
Question:	Is the no-mar tip removable where the no-mar tips is not needed for work other than finish work
Answer:	Yes in the first 30 days. Other than that no warranty
Question:	What type of air compressor should I buy to use with this
Answer:	This is more than a brad nailer. It does 16 ga finishing nails up to 2-1/2 inch in length. I used it for nailing the baseboard in my house.

Product features

Tool-less, Easy-to-Clear Nose

For quick and simple nail extraction should a nail jam during use

360 Degree, Fully Adjustable Exhaust Port

Directs air exhaust away from the user during use

Ergonomically Designed Simple Flip Actuation Switch

For easy transitions between bump fire or sequential fire modes

Factory Installed Air Fitting

Is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

The Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case is the safer, pneumatic alternative to powder actuated concrete tools for basement renovations, garage updates, or new construction framing. Simply connect the concrete nailer to your air compressor, load a concrete drive pin into the nose of the gun, and pull the trigger to drive pins up to 10 times faster than with conventional powder tools. This air powered nail gun shoots single pins without needing to pre-drill holes, and is compatible with concrete pins from 3/4" to 3". Firing into green concrete (concrete that was poured less than 25 days ago, in most climates) is ideal when firing longer pins and will provide the best results for plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, subflooring and more. The body of the nailer is constructed of lightweight and rugged magnesium to reduce operator fatigue and features 360 degree adjustable exhaust, an air filter / anti-dust cap, ergonomic handle, and a blow molded case for easy transport and storage. The Pneumatic 3" Single Pin Concrete Nailer with Case is covered by Freeman's 7 Year Limited Warranty and 90 Day Wearable Parts Warranty.

• Nailed It: This single pin concrete nailer is a safer, pneumatic alternative to powder actuated concrete tools for basement renovations, garage updates, or new construction framing. It shoots single pins from 3/4" to 3" without needing to pre-drill holes.
• Pro Design: Featuring a magnesium body with one piece drive blade of hardened steel, this nailer is ideal for fastening wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs. It's 10 times faster than powder-actuated systems.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and DeWalt.

User questions & answers

Question:	What kind of nail does it use
Answer:	No
Question:	Where can i find the nails you can use with concrete nail gun
Answer:	I used it for attaching pressure treated 2x4’s to a basements concrete floor (18 year old home) and it worked great.
Question:	Would this nailer work to fasten osb sheathing to 16ga C purlins
Answer:	This is an air gun that drives nails into concrete. Not for Toyota’s
Question:	Did this work better than a ramset? I am using it to finish a basement and attach pressure treated wood to my poured concrete floor. Thank you
Answer:	They are two different types of tools and is not fair to compare but it is quieter.

Product description

RYOBI P325 18-Volt ONE+ AirStrike 16-Gauge Cordless Straight NailerCordless power drives up to 800 nails per chargeNo compressors, hoses or pricey gas cartridges requiredProvides optimum convenience and performance

• AIR PRESSURE ADJUSTMENT: A switch on the back of the unit allows you to increase the depth of your nail driving
• LED LIGHTING at the head allows you to see the job while you’re working in dim conditions. It can be activated by a separate trigger, too, which keeps you safe from accidentally firing off nails when you don’t want to
• LOW NAIL INDICATOR: Help prevent against dry firing by knowing that you need to replace the clip before you damage your woods
• TOOL-FREE ADJUSTMENTS: Knobs can adjust your depth, and you can flip out the front end to clear nail jams
• ONE+ COMPATIBLE: This tool is part of the One+ family, which means you can use this with Ryobi’s 18V batteries, including the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Is this normal? I laid it flat on the floor overnight and when I checked in the morning there were some lubricant that oozed out on the motor side
Answer:	I too had some lubricant that was oozing out of mine. I would drop a few extra bucks and get the DeWalt....my Dewalt works perfectly every single time and doesn't make a mess.
Question:	How is this on hard wood like oak
Answer:	It works just fine on oak and every other wood I've tried.
Question:	Will this wotk with p191 3.0 ah lithium+ hp high capacity batteries
Answer:	In general any 18V ONE+ battery works with any 18V ONE+ compatible tool. As noted, this particular ASIN is TOOL-only and does not include the battery or charger). The tool is for use with ONE+ 18V nickel-cadmium and 18V lithium-ion battery packs. See tool/appliance/battery pack/charger correlation supplement 987000-432.
Question:	whats the difference between this tool and Ryobi Cordless BRAD NAILER 18GA Model P
Answer:	The main difference is between the nails that this and the P320 take. The P320 takes 18 gauge brad nails and this tool takes larger 16 gauge finish nails. Functionally, the smaller brad nails have less holding power but are less visible since they have a smaller head. The larger brad nails are good for things such as base-boards but are more than you would generally need for things such as trim. In my research, I was told several times that if you are only going to get one nailer, get the larger 16 gauge finish nailer. This is because you can still the 16 gauge for trim (it just needs some caulk to cover the holes) but you generally cannot use the smaller 18 gauge brad nails for things that require more power (like base-boards).

• This pneumatic nailer has a great power, slight marks possibly left on the surface of wood, which is a normal phenomenon. We also prepare an empty oil bottle to fill with the oil you prefer.
• 【One Piece Drive Pin】This framing nailer kit features one piece drive pin, which reduces most loss to the nailer during working, and promises perfect nailing over 100,000 times to you.
• 【Tough and Dependable】The magazine is made from anodizing alum, overcome the disadvantages that insufficient hardness and high attrition rate of normal metal materials.
• 【Wide Range of Use】This framing nailer is ideal for everything from heavy duty work like roof decking, fencing, and pallet building to fine detail work like cabinetry, crown moulding, window casings, base boards.
• 【Interchangeable Trigger】Selective actuation on trigger allows for either sequential or contact nailing. Also this framing nailer loads safety trigger device-low nail lockout prevents dry firing and reduces unwanted marks on the work material.
• 【Considerate Design】Special angled designing magazine perfectly applies to framing nailer, saving much more labor compared with ordinary nailer; TPE handle sheath with high freeze crack resistance admits the during work in chili environment.
• 【The Right Tool for the Job】We're committed to providing outstanding value, top tier customer service-you are promised to get a brand new nailer if the first one break down within 90 days.

User questions & answers

Question:	Does the nailer have a depth adjustment
Answer:	Yes
Question:	Will this penetrate a 1" thick oak board? 3" nails into softwood framing
Answer:	Dear friend, this framing nailer is perfect for nailer of 2" to 3-1/2" full round head nails, it can penetrate 1" thick oak board and fix the framing easily.
Question:	What is the nailer's gauge
Answer:	Dear friend, it is recommended to use 21°Heavy Duty 3-1/2 Inch Full Round Head Nails for this framing nailer.
Question:	What’s the nails size
Answer:	Pasload framing nails

Product description

The Freeman P4FNCB Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners is an incredible collection of tools for DIY home improvement and repair projects as well as professional contractor jobs. This kit covers all your finishing needs with four durable and rugged air powered tools that complete a wide span of applications. The 16-Gauge 2-1/2" Straight Finish Nailer (PFN64) is perfect for molding, chair rails, door casing, as well as cabinetry and furniture construction. Use the 18-Gauge 1-5/8" Narrow Crown Stapler with Quick Jam Release (PST9040Q) ideal for handling decorative trim, cabinet backing, and hobbies and crafts. The 18-Gauge 2" Brad Nailer with Quick Jam Release (PBR50Q) is ideal for interior and exterior finish and trim, furniture, cabinetry, and picture frame assembly. Top it off with the 23-Gauge 1" Micro Pinner (PP123), specifically designed for applications such as tacking decorative trim, glazing strips, jewelry cases, small picture frames, and cabinetry trim. Lubrication oil, adjustment wrenches, safety goggles, belt hooks, and 200 fasteners for each tool are included, along with a convenient canvas carry bag. The Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners will allow you to get right to work on finish jobs.

• Nailed It: The Freeman P4FNCB Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners comes with a 16-Gauge 2-1/2" Straight Finish Nailer, 18-Gauge 1-5/8" Narrow Crown Stapler, 18-Gauge 2" Brad Nailer, and 23-Gauge Micro Pin Nailer. This kit has everything you need for all your finishing needs.
• Pro Design: This kit comes with a canvas carrying bag that includes a starter pack with 200 fasteners for each gun, plus oil, wrenches, belt hooks, and safety glasses. It's got everything you need for finish work, from window casing to decorative trim.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What brand brads and nails that are compatable
Answer:	It depends on the type of wheels. The ones I used pressed on the the end of the shaft so I was able to attach them after the gearbox was mounted.
Question:	Are the guns air hose "ready" or will I need fittings
Answer:	In theory, you could run the gearbox backwards to drive the small DC motors as a generator. I wouldn't expect to get a large amount of energy from the machine, or expect the machine to handle long term operation, but it could be used as a simple illustrative device.
Question:	Can you use any other nails with these? I have some nails I just ordered & really done want them to go to waste
Answer:	Yes, 5 round and 1 hex axle (3 7/8 inch long)
Question:	is the product american made
Answer:	with what I consider to be its minimum, base configuration, I'm getting 100mm wide, and 170mm long.this is working with the universal base plate kit and the duel motor drive. the unit can be shrunk or expanded as need be though.

Product description

Bostitch BTFP72155 15-Guage Heavy Duty Smart Point DA Style Finish Nailer kit

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool.
• DRIVES: 15 GA "DA" Style Angled Finish Nails from 1-1/4" to 2-1/2" length.
• TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal.
• DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails.
• KIT INCLUDES: Nailer, 1/4" Air Fitting, Carrying Case and Extra No-Mar Tips.

User questions & answers

Question:	To seller: can it shoot the full 2-1/2" da nails or not? two users claim no, slot won't take longer than 2.25", means 2" is biggest std nail
Answer:	Hi there. The tool in this kit is the same as the NT1865DMAQ4 bare tool. Hope this helps!
Question:	Whats the degre angle on this gun
Answer:	A 16ga straight finish nail is less expensive than a 15ga angled nail. There are many different box counts and coatings. So be sure to look at these specs when comparing the two.
Question:	what is the best air compressor suggested to use this nailer
Answer:	I g list.uess go to parts
Question:	What gauge nails does it shoot? Says 16ga and 15ga
Answer:	It’s hidden on the nailer

• 📢Friendly customer service: we provide new replacement instead of repairing.
• For Free -- 800pcs nails and 200pcs staples included.
• 🔰【Spiral-Drive Technology And Cordless Design】With its spiral-drive technology, the cordless brad nailer stapler deliver more full-power shots than comparable corded tool without the hassle of using cord, gas and compressor.
• 🔰【Up To 1100 Shots Per Full Charge】Powered by NEU MASTER 20v MAX rechargeable Lithium-Ion battery which has passed 1000 charging cycle test, the electric nail gun/staple gun can deliver up to 1100 full power shot per full charge.
• 🔰【2-in-1 Versatile Battery Brad gun/Staple gun】It drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes its ideal for fastening lightweight decoration trim, installing sheets of insulation, home repair while not recommended for quarter round installation or heavy duty construction projects.
• 🔰【Flawless Finish And User Friendly】Non-Marring rubber nose provides a complete finish. Oversize trigger and an ergonomic handle to combat grip fatigue during strenuous or time-consuming tasks.
• 🔰【LED Light And Belt Hook】With LED lights and the belt hook, you can illuminate work area and take your cordless staple gun/nail gun anywhere to get the job done.

User questions & answers

Question:	Why is it not recommend for 1/4 round install
Answer:	It should work for shoe mould.
Question:	Hi, are the brads long enough for crown molding
Answer:	Dear Steven, No. The brads used for this cordless brad nailer NTC0023 may be too short to used for crown molding. If you have any issues please feel free to contact [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	Will this unit work with "Headless" brads
Answer:	It works with staples and brad nails. Head is rather small on brad nails already but if you are talking about finishing nails or pins then no it won’t work. If you’re looking for something to staple fabric or nail MDF then it’s a really good tool.
Question:	Made in china
Answer:	Hello Customer, Yes. As a new seller, we take full responsibility for our customers, and our NEU MASTER products are backed with 2 year warranty. Please feel free to contact us via [[email protected]] if you have any issue and we will answer you ASAP. Spartatool Support Team

Product features

For dedicated crafters and DIYers who don’t want to be constrained to gas, cord or air compressor, the NEU MASTER NTC0023 cordless nail gun/staple gun is the tool to use. With its spiral-drive technology powered by a NEU MASTER 20V MAX Lithium-Ion battery NTC0023-18 is ready to go to work without the hassle of using gas, compressor and cord. Its delivers up to 1100 shots on a single charge. Its drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes it ideal for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more. Kit includes a Brad Nailer Stapler, a 20-Volt li-ion battery, a battery charging unit, 200pcs 3/4'' staples, 400pcs 5/8''brad nails and 400pcs 3/4'' brad nails.

• 100% battery powered; eliminates the hassle of using gas, compressor, and cord
• Battery is compatible with all NEU MASTER 20V cordless tool
• spiral-drive technology maximizes runtime and durability
• Delivers up to 1100 shots on a single charge
• Magazine holds up to 100 brad nails or staples
• Drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4''
• LED lights illuminate work area
• Ergonomic handle for comfort and control
• Power adjustment dial and oversize trigger
• Features a quick-release mechanism
• Non-marring nose provides a flawless finish
• Belt hook for user convenience
• Great for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more.