12 best brad nail gun

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit

Product description

The BOSTITCH BTFP12233 Smart Point 18GA Brad Nailer Kit is the perfect tool to be used for cabinetry, upholstery and paneling. It allows you to choose from trigger system and countersinking options that best meet your project needs. The Smart Point Technology allows for easy nail placement as a result of a smaller nose compared to current BOSTITCH nailers and no need to compress the contact trip to actuate the tool. It drives 18 GA brad nails from 5/8" to 2-1/8" length. Oil-free operation reduces the risk of oil stains. Tool-free jam release mechanism for easy nail removal, Dial-A-Depth control for precise countersinking of brad nails, along with a selectable trigger system for sequential or contact operation. Other Features: 1/4" air fitting, rear air exhaust, and belt hook with integrated pencil sharpener. Specifications: Magazine Angle is Straight, Magazine Capacity is 100, Magazine Loading: Side Load, No Mar Pad, Operating Pressure is 70-120 psi.Kit Includes: Nailer, 1/4" Air Fitting, Carrying Case and Extra No-Mar Tips

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool
• DRIVES: 18 GA Brad Nails from 5/8 inches to 2 1/8 inches length
• TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal
• DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails
• KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips

User questions & answers

Question:	Does the kit come with a carrying case or not? Description contradicts
Answer:	Yes, there is a carrying case included.
Question:	Power source in the description says “corded electric”. I thought the power came from the air compressor. Why am I having to plug it in as well
Answer:	Trust me, it is powered by an air compressor. In fact I used mine yesterday. This is a great product. Just remember to use compressor oil in the nailer before each use.
Question:	Is the trigger the only thing that activates the nail being fired? Seems less safe that way
Answer:	No, the nose of the nailer must be depressed to activate the nailer.
Question:	My moldings require a very accurate placement of the nail. Will the "smart point" be worth the extra money over other nailers
Answer:	Absolutely. I found the placement of the brads to be very accurate using the smart point. I use this nailer all of the time.

Product features

A Tool That Will Sort You Out

The BOSTITCH Nail Gun, Brad Nailer comes easily allows you to work on home improvement projects with ease. This power tool also comes with a trigger system and tool-free jam release mechanism for easy nail removal.

Convenient on the Jobsite

This power tool by BOSTITCH also features a ¼ inch air fitting, rear air exhaust and belt hook with an integrated pencil sharpener, giving you the ultimate convenience. This tool provides an improved control and flexibility when fastening into various types of materials. Not only will you find this tool convenient, but also find it super easy to use.

Ergonomic and Comfortable

The design of this power tool makes is simple and easy for nail placement due to a smaller nose. In addition, the ergonomic carrying case so that you can carry this nail gun to your workspace.

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

• This air powered nail gun has a great power, slight marks possibly left on the surface of wood, which is a normal phenomenon. We also prepare an empty oil bottle to fill with the oil you prefer.
• 【Full Brad Nail Gun Set】This Air Nailer includes: 2-in-1 brad nailer, 200 18-ga. brad nails 2”and 200 18-ga. crown staples 1-5/8", a hard-shelled carrying case, one【empty】oil bottle, one CE safety glasses, two hex wrenches. An air Compressor is not sold with brad nailer.
• 【MULTIFUNCTION】2-in-1 magazine drives both 18 gauge pneumatic brad nails and crown staples making this a highly versatile tool. It can accommodate nails ranging from 5/8”-2", staples ranging from 5/8”-1-5/8".
• 【STURDY MATERIAL】 Heat treated aluminum housing-extra heavy duty industrial design high-capacity magazine holds up to 100 brad nails or crown staples; Working air pressure 70-100PSI, max pressure 120PSI, which give you a easy perform of nail work.
• 【 MORE CONVENIENCE】 CE Safety glasses, which prevents accidental firing of wood dust. Nail reload indicator visual nail reload indicator, located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided.
• 【ERGONOMIC DESIGN】Anti-slip rubber grip and 360 degree adjustable exhaust which give you a better experience with nail gun hitting. Tool-free jam release mechanism for easy nail removal. Safe trigger device provides a safe work.
• 【BETTER QUALITY】 Brad Nailer can nail 100,000 times, which provides longer service life. The lightweight aluminum body weighs only 2.4lb, which relieves the fatigue of the user during long work.

User questions & answers

Question:	How long is the warranty period
Answer:	TACKLIFE offers a 24 month warranty on its products. If you have any questions about this brad nailer, please contact us at [email protected] . We will solve the problem for you. Thank you for your question.
Question:	Can you use to shingle roof
Answer:	No the nails would be long enough but you wouldn't use a brad nail on a shingle. Very good for trim and diy projects around your house.
Question:	Does this use narrow or wide crown staples
Answer:	1/4" crown staples.
Question:	Does this use narrow (1/4 in. wide) crown staples or the wide one
Answer:	Narrow

Product features

The TACKLIFE 18 GA 2-in-1 Pneumatic Brad Nailer

The Tacklife 18 GA 2-in-1 pneumatic brad nailer heat treated aluminum Housing-extra heavy duty industrial design high-capacity magazine holds up to nails. The spacious magazine carries up to 100 brad nails 15-50mm or crown staples 16-40mm while the quick-release design makes jam clearing a breeze. Safety glasses are made from CE, which prevents accidental firing of wood dust.

NOTE: We not sell an air compressor with this pneumatic brad nailer, you need to prepare one before you start your project.

Product description

The Makita 18 Gauge 2-inch Brad Nailer (model AF506), features a durable and compact design with ease-of-use features including a narrow-nose design that makes it ideal for a wide variety of finish applications. The AF506 can operate from 70 to 120 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch, and has a magazine capacity up to 100 nails. The cast-and-machined nose piece is engineered for precise contact with the workpiece, with a non-marring rubber nose engineered to protect the work surface. Additional features include an ultra-narrow nose design that is ideal for fastening in confined areas, and a convenient “tool-less” depth adjustment dial that can be set for a wide variety of finish applications. For added convenience, the multi-directional exhaust port rotates 360 degrees to direct exhaust air away from the user. The AF506 is engineered for driving a range of 18 gauge brad nails from 5/8" to 2" into hard or soft wood applications and is ideal for trim work, baseboard and crown molding installation, flooring and other woodworking applications.

• Powerful motor drives a range of 18 gauge brad nails from 5/8" to 2" into hard or soft wood applications
• Aluminum body, magazine and cylinder for strength and durability; weighs only 2. 9 lbs.
• Narrow nose design allows easy nailing access in confined areas
• Built-in air duster provides convenient air flow to clear work surface
• Easy to use "tool-less" depth adjustment dial for a wide variety of finish applications

User questions & answers

Question:	Where is this product made
Answer:	China
Question:	Is it the right tool for installing 1/2" thick base boards and door frames? If so, what nails to use
Answer:	Absolutely great to Makita’s been around for long as I can remember before I was born
Question:	Can you use this for fences and flooring structure
Answer:	This is a brad nailer. Wire brads are not suitable for any structural purpose. So, NO to flooring. It might be adequate for building a purely decorative fence, although, imho, not the best choice.
Question:	Do i need a compressor for this
Answer:	Yes. I use the Senco one gallon.

• Durable - This 18 GA straight brad nailer designed with durable aluminum body and a ergonomically designed comfort grip handle. Note: This is a Pneumatic Brad Nailer, it needs connect Air Compressor by Air Hose. Working air pressure 75-100 PSI
• Compatible - This straight brad nailer is suitable for 3/8" - 2" length 18-Gauge brad nails. Depth adjustment switch provide three different kinds of nail depth modes, precise located the depth of nails
• Security - Improved magazine release latch to avoid pinching hands when placing nails, more safe then other brad nailer. The quick jam release design can easily clear jammed nails. Note: Please release the connect with the trachea, before opening the lam clearing latch
• Easy to Use - 360 degree adjustable exhaust. Notice: Please make sure that the vent is not towards the user when using
• Wide Application - This brad nailer can used for woodworking, pet house DIY, wood flooring, picture framing, door or window molding installation and much more

User questions & answers

Question:	Does this have a non-marring tip
Answer:	Dear Customer, We're sorry this nail gun don't have a non-marring tip. But the tip is made of high-end material, strong and durable enough. If you have any issues in using, you can contact us through Amazon message. Best regards, WORKPRO Customer Service
Question:	Do you need an air compressor for this to work? if you do, what should i buy? i'm just trying to put a stair skirt in. thank you
Answer:	Yes, this is a pneumatic brad nailer, so you need to buy an air compressor and an air hose. You can buy these products directly on Amazon.
Question:	What size minimum compressorwill work
Answer:	Dear Customer, This pneumatic brad nailer can work on (75-100) psi, (5-7) kg/cm2, (0.5-0.69) Mpa. So you can choose the suitable air compressor. Best Regards WORKPRO Customer Service
Question:	Does this come with the oil for lubricatiin? If not what type of oil should i use
Answer:	Dear Customer, There comes with a bottle of lubricatiin oil. If you need any more lubricatiin oil, you can buy the pneumatic tool oil. Best regards, WORKPRO Customer Service

Product features

WORKPRO 18-Gauge Pneumatic Brad Nailer

This WORKPRO 18-Gauge Pneumatic Brad Nailer Compatible with 3/8” up to 2” Nails.

Quick jam release design can easily clear jammed nails.

Magazine release latch

Improved magazine release latch to avoid pinching hands when placing nails.

Depth Adjustment wheel

Adjust firing depth of the nailer by the depth adjustment wheel according to your needs.

360 degree adjustable air exhaust

360 degree adjustable air exhaust port to control the direction of the air output.

Lubricating oil

Put a few drops of oil into the fitting before using to keep the brad nailer running smoothly!

Product description

The 2" 18-Gauge Brad Nailer - NT50AE2 is ideal for trim work, furniture building and other finish applications that require precision and performance that the pro and DIY both require. It accepts finish brad nails from 5/8" in length up to 2". With a lightweight economical design, this brad nailer is engineered for the toughest jobs.

• BRAD NAILER: Accepts 5/8" up to 2" 18-gauge brad nails
• FASTENERS: Accepts 5/8 In. to 2 In. 18-gauge fasteners
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 2.2 lbs, for easy all day use
• DEPTH ADJUSTMENT: Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
• NO-MAR TIP: No-mar tip on the nose protects the work piece from unintended markings
• RELOAD INDICATOR: Located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided

User questions & answers

Question:	Can this be used to nail quarter round to the floorboards
Answer:	This nailer is perfect for quarter round. The smaller 18 gauge nails make it less likely to split the wood. I’ve also noticed that this nailer doesn’t leave dimple marks. I’ve used mine to install base trim, quarter round, shiplap, and furniture making.
Question:	Is it possible to fix the safety so that I can shot without applying pressure to the nose where the nail exits the gun
Answer:	I wouldn’t, seems like a good way to shoot your finger. Some of my guns have double triggers and it’s not an issue. Plus how would you control the depth of the nail setting action.
Question:	why does it say power source corded electric
Answer:	I guess they mean the air compressor is electric and it’s the power source. The nailer is all air.
Question:	can this gun take 18 gauge headless nails
Answer:	I got a stapler in my box, don't know what you will get!

Product features

360 Degree Adjustable Exhaust Port

Keeps dust, debris and oil off the finish project.

Visual Nail Reload Indicator

Located on the magazine and alerts the user when nail quantities are low so that blank drives are avoided.

Selective Actuation

Allows the user to select bump fire or contact fire modes with the simple flip of a switch.

Tool-less, Easy-to-clear Nose

For quick and simple nail extraction should a nail jam during use.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Where do I get the end tips at
Answer:	That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html
Question:	Is the 20v battery included
Answer:	No, the battery was not included.
Question:	What is max nail length
Answer:	The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps.
Question:	Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one
Answer:	Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces.

• 【2-IN-1 Tool】No cords, no limits! KIMO cordless brad nailer proves that you don’t need noisy air compressor or tangles of hose anymore to drive brads like a pro. KIMO only designs the best nail guns and makes it possible for you to have both nailing and stapling function simultaneously at a modest price. (Suitable for 18 GA nails: 3/4’’to 2’’, and 18 GA staples: 3/4’’to 1-5/8’’)
• 【Dual Modes & Convenient Operation】Easily alternate between sequential and contact-actuation with our dual-mode toggle switch, which means you can fire a single brad with each trigger squeeze or a series of them by bumping the contact element at a speed of 80 nails/min. Adjust firing depth with the rotation knob at the top of the gun, making it easy for a wide range of materials and different needs in nailing.
• 【Proudly Present KIMO Li-ion Technology】For over 25 years, KIMO has made significant progress in the 1,000-Charging Cycle Test that ensures each KIMO lithium-ion battery is more powerful and lives longer than others. With this 2.0Ah battery freshly charged, driving a total 700 brads into woods, and the tool doesn’t falter. Go with KIMO, and no worries about dying cells anymore!
• 【Lightweight Design & LED Lighting】Tool weight matters. Think about it; if you are installing crown molding overhead, a few extra pounds could make the difference between aching your shoulder and a pain-free job. KIMO nailer/stapler weighs in at a slight 6 lbs. Also, a pair of front-positioned LED lights provide a bit of aid besides the gun when nailing in a dark place.
• 【Compact and Comprehensive Set】The compact size lets the nailer fit into tight spaces and work in awkward positions where it might be difficult to swing your hammer and drive in a tiny nail. Now, a simple one-click helps you get the most valuable toolkit. Each 18GA Brad Nailer/Stapler Kit comes with 1* 20V 2.0Ah Lithium-ion Battery, 1* Fast Charger, 700 PCS 18GA nails, 300 PCS 18 GA crown staples, and 1*Allen Wrench for releasing jams.

Product features

Mind-Blowing Cordless Power and Unrivaled Runtime

Founded in the 1990s, KIMO has grown from a small workshop to a global enterprise that develops, designs, manufactures, and sells Lithium-Ion Power Tools in the past 25 years. As a capabilities-driven company, KIMO has dedicated to providing robust one-stop solutions to users around the world. Due to the breakthrough we made in lithium-ion technology, KIMO has been creating a single-battery system to power every 12V/20V KIMO tool. Professionals absolutely love the unrivaled runtime of the power, and creative DIYers enjoy the versality of our tools. Whoever you are, KIMO's got your back!

KIMO 20V 2-IN-1 Cordless 18GA Brad Nailer & Stapler

Have you ever dreamed of the sheer ease of remolding your home or tackling weekend building projects with a nail gun? The KIMO 2-in-1 Brad Nailer should be your entry point. The battery-powered nailer/stapler delivers 80 pieces of 18-gauge brads/staples per minute, being suitable for finish work, trim, crown, baseboards, and other light materials. The patented air cylinder makes this nailer a solid performer with plenty of power for trim and other finish carpentry tasks. KIMO kindly prepare a juicy 2.0Ah lithium-ion battery in the package to ensure prolonged runtime. Be a smart investor, you will never go wrong with KIMO.

Lightweight and Compact Design

While no battery-powered tool can ever be considered lightweight and compact, the KIMO is one of the lightest cordless nailers on the market, at just 5 pounds (minus the battery). It’s expected to stay for long in your hands and attached comfortably to your belt.

Decent Nail Capacity

KIMO brad nailer features a 2-in-1 bottom-load magazine that is compatible with either 100 pcs 18 gauge brad nails (3/4” to 2”) or 1/4” narrow crown staples (3/4” to 1-5/8”) for maximum versatility.

No Cords, No Limits

Are you ready to work without the hassle of using gas, compressor, and hose? Have you ever wondered to tackle jobs both large and small with the features of a pneumatic and the freedom of cordless? No matter you are professionals or artistic fanatics, you may find KIMO brad nailer a judicious choice.

Adjustable Depth of Drive

Tool-free depth adjustment for flush and precise countersinking of nails. KIMO is able to drive 18 GA brad nails from 3/4 in to 2 in, making the nailer ideal for fastening decorative molding, casing, kitchen crown, and shoe molding.

1400 Nails per Charge

Charging in only 45~60 minutes, the battery fires up to 1400 shots per charge with a 20V 4.0Ah battery and fastens 80 nails every minute, so you can get the job done faster.

Dual LED Lighting

Dual built-in LED lights located near the firing head is effectively bright to illuminate all operation especially for you in dark working environment, ensuring precise control in poor light.

Moulding

The narrow body tool is easy to handle and work in tight space, making it ideal for floor moudling.

Furniture Building

A nice pal for your detailed furniture building and assembly, reducing the risk of damage thin pieces of trim.

Frame Triming

The lightweight and compact design ensures the safety operation overhead.

• 📢Friendly customer service: we provide new replacement instead of repairing.
• For Free -- 800pcs nails and 200pcs staples included.
• 🔰【Spiral-Drive Technology And Cordless Design】With its spiral-drive technology, the cordless brad nailer stapler deliver more full-power shots than comparable corded tool without the hassle of using cord, gas and compressor.
• 🔰【Up To 1100 Shots Per Full Charge】Powered by NEU MASTER 20v MAX rechargeable Lithium-Ion battery which has passed 1000 charging cycle test, the electric nail gun/staple gun can deliver up to 1100 full power shot per full charge.
• 🔰【2-in-1 Versatile Battery Brad gun/Staple gun】It drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes its ideal for fastening lightweight decoration trim, installing sheets of insulation, home repair while not recommended for quarter round installation or heavy duty construction projects.
• 🔰【Flawless Finish And User Friendly】Non-Marring rubber nose provides a complete finish. Oversize trigger and an ergonomic handle to combat grip fatigue during strenuous or time-consuming tasks.
• 🔰【LED Light And Belt Hook】With LED lights and the belt hook, you can illuminate work area and take your cordless staple gun/nail gun anywhere to get the job done.

User questions & answers

Question:	Why is it not recommend for 1/4 round install
Answer:	It should work for shoe mould.
Question:	Hi, are the brads long enough for crown molding
Answer:	Dear Steven, No. The brads used for this cordless brad nailer NTC0023 may be too short to used for crown molding. If you have any issues please feel free to contact [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	Will this unit work with "Headless" brads
Answer:	It works with staples and brad nails. Head is rather small on brad nails already but if you are talking about finishing nails or pins then no it won’t work. If you’re looking for something to staple fabric or nail MDF then it’s a really good tool.
Question:	Made in china
Answer:	Hello Customer, Yes. As a new seller, we take full responsibility for our customers, and our NEU MASTER products are backed with 2 year warranty. Please feel free to contact us via [[email protected]] if you have any issue and we will answer you ASAP. Spartatool Support Team

Product features

For dedicated crafters and DIYers who don’t want to be constrained to gas, cord or air compressor, the NEU MASTER NTC0023 cordless nail gun/staple gun is the tool to use. With its spiral-drive technology powered by a NEU MASTER 20V MAX Lithium-Ion battery NTC0023-18 is ready to go to work without the hassle of using gas, compressor and cord. Its delivers up to 1100 shots on a single charge. Its drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes it ideal for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more. Kit includes a Brad Nailer Stapler, a 20-Volt li-ion battery, a battery charging unit, 200pcs 3/4'' staples, 400pcs 5/8''brad nails and 400pcs 3/4'' brad nails.

• 100% battery powered; eliminates the hassle of using gas, compressor, and cord
• Battery is compatible with all NEU MASTER 20V cordless tool
• spiral-drive technology maximizes runtime and durability
• Delivers up to 1100 shots on a single charge
• Magazine holds up to 100 brad nails or staples
• Drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4''
• LED lights illuminate work area
• Ergonomic handle for comfort and control
• Power adjustment dial and oversize trigger
• Features a quick-release mechanism
• Non-marring nose provides a flawless finish
• Belt hook for user convenience
• Great for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more.