9 best benchtop cnc milling machine

Product description

Description

1. The table applies to mini bench drill and drill bracket series.

2. It can also be applied to other suitable machine.

3. The bench is made up of several adjustable dovetail aluminum alloy,

4. We can guarantee a minimum of space and to ensure accuracy.

Specifications:

Material: Aluminium Alloy

Size: 310 * 90mm * 80mm

X-Route: 200mm

Y-Route: 50mm

Distance of grooves: 34mm

T-slot size: standard size slot is 15X8X6mm

Scale travel: 1.25mm (circle), 0.05mm (one cell)

Packing List

1 * Worktable

• 【Specifications】X-Route: 200mm. Y-Route: 50mm. Distance of grooves: 34mm. Scale travel: 1.25mm (circle), 0.05mm (one cell). T-slot size: standard size slot is 15X8X6mm.
• 【Very Wide Application】The Multifunction Working Vise Table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine.
• 【Small Size and Ensure Accuracy】Size: 310 * 90mm * 80mm. The small size makes it easy to carry. The Multifunction Working Vise Table can guarantee a minimum of space and to ensure accuracy.
• 【Material】The bench is made up of several adjustable dovetail aluminum alloy, easy to adjust.
• 【Shipment】Feel free to contact us if you have any questions.We will provide the best suitable solutions for you.We are committed to provide best service for every customer!

• ✅ High Quality New Version - Yofuly CNC 3018-Pro is an upgraded version of CNC 3018. We focused on updating the control board. The new control board adds fixed heat sink and external fan, as well as a sturdy shell, which greatly extends the service life of the control board.
• ✅New Offline Controller - Upgrade to 1G Storage Capacity! ①No need to connect the computer. ②Included SD card reader to write into the root directory G-code files or NC file. ③Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle.
• ✅Easy To Install - Some components and core components have been assembled. The CNC3018 PRO machine is very easy to install , stable structure ,take only about 20 minutes to assemble.
• ✅Wide Application - This 3018 pro engraving machine can be engraved plastic, wood, acrylic, pvc, pcb or the like material. Drill bit can not engrave hard metal, jade or other hard materials.
• ✅BEST SERVICE - We are committed to providing the best products and services. If you have any questions, please feel free to contact us, we will give you a satisfactory solution.

User questions & answers

Question:	Is it comparable with easle
Answer:	The drill I purchased came with one battery and a charger.
Question:	What is the recommended oil for the shafts and bearings
Answer:	6.85"
Question:	Will this work on acrylic templates
Answer:	The charger will take approximately 67 minutes to recharge the battery.
Question:	Does this also work with Ardruino
Answer:	I have a 20 yr old dremmel that it is working with...

Product features

CNC 3018 Pro is an upgraded version of 3018

1）Manual Control: Manually adjust the position of the three axes of XYZ as the starting point of carving, manually open or close the spindle.

2）Document Engraving: The offline board can be linked to the GRBL control board for carving without storing a computer.

3）Storage File: After the offline board is connected to the computer, it is recognized as a USB mass storage device, and the engraving file can be directly accessed.

New Version Control Board

New Version Offline Controller

Specification of CNC 3018 Pro

• Effective Engraving Area: 300 x 180 x 45 mm(11.8 x 7.1 x 1.8”)
• Frame Size: 400 x 330 x 240 mm(15.7 x 13.0 x 9.4")
• Rated power: 60W; Maximum power: 120W
• Software: Grbl control(Candle) / Laser GRBL control systems
• Supported OS: Windows XP, Windows 7, Windows 8, Windows 10

Specification of 775 DC Motor

• Speed: 10000/min
• Rated Current: 1.5A
• Voltage: 24V
• Shaft Diameter: Approx.5 mm; Shaft length: Approx.14 mm
• Body diameter: Approx.42 mm; Motor Overall Length: Approx.67 mm

775 DC Motor Features

• ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.
• PURE COPPER WIRE CORE ROTOR, with precision winding technology, the geared motor power instant increased by 30%.
• With Copper Wire Production, durable for using. Easy to wire and install. Durable construction for long-lasting performance. Wide applied to electric tools, electric fans, electric cleaners, etc. Small size but large torque

10pcs PCB Engraving Drill Bits

• A power tool for 2D sculpture, 3D sculpture
• Drill Bits: Tip 0.1 mm, 20 degree, Diameter 3.175 mm
• A Wide Range of Materials can be engraved, including:Aluminum,ABS, Acrylic, PVC, Nylon, Resin ,Majority of plastics ,Wood,

Product description

Package include:



1 set 3018PRO GRBL Control CNC Engraving Milling Machine Kit

1 set ER11 Collet

1 set Power Supply

10 set 20°0.1mm Drill Bits

1 set Allen Wrench



Specification:



Working area: 30x18x4.5cm

Frame size: 40x33x24cm

Material: Aluminum Alloy

Processing thickness:4.5cm

Chuck specification: ER11 Collet

Control software: Grbl Controller

Interface: USB

Stepper motor: 42 stepper motor

Voltage: 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m

Spindle: 775 spindle motor (12-36V) 24V:10000r / min

Power: 24V 5.6A power adapter (input voltage 110-240V), simple and convenient

System requirements: windows XP SP3, win7. (32/64 can be). Linux; Can't support Apple product





GRBL 1.1f,USB port cnc engraving machine control board, 3 axis control:



Connection: USB (USB-CH340)

Software: GRBL controller,UniversalGcodeSender

Input voltage: 12-24V

Master chip: atmel 328P

Stepper motor driver: A4988

Spindle drive chip: MOSFET (recommendation 12~24V, current : within 10A )

Spindle PWM speed: Support

Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)

Power Interface: 5.5-2.5mm DC interface



Main application:Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.

• It is not recommended to update the software or firmware of the control board, otherwise the GRBL control board will be damaged
• This machine can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material. Aluminum alloy material with high precision and long service life.
• If you have any questions about this DIY mini cnc machine, please feel free to contact us.

User questions & answers

Question:	Where can I download the software for my Mac to run the cnc? If not how can get it to run on my computer
Answer:	You will need to download GRBL for Mac from the github website. The software you are looking for is GRBL Control which will allow you to send the gcode. There are other programs that can do the same. Universal Gcode Sender is one of them. I am using ESTLCAM which is a little more user friendly. There is a free version available. Since this is an Arduino based machine you could use Pronterface also. There is just a small learning curve. Carbide Create is supposed to work but I have not used yet.
Question:	Does this include a precompiled gbrl controller package for windows
Answer:	It includes grbl controller software, which is in the Cd disc
Question:	Will this engrave brass
Answer:	As with aluminum, yes, but you need to choose your settings well.
Question:	Can this engrave steel? Cut steel
Answer:	You would need to master cut parameters and would still be very limited in what you would do. This machine isn't intended for steel.

Product description

Features:

Machine tool with powerful motor, the motor box and spindle box for conjoined structure. Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover. Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal. Maximum motor power is 60W by using more powerful motor. Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.

Specification:

Condition: 100% brand new

Metal: Metal

Weight: 4990g/176oz

Motor Speed: 12000rpm

Input Voltage/Current/Power: 12V DC/5A/60W

X-Axis travel: 32mm

Z-Axis travel: 145mm

Max Diameter of Machined Material: 100mm

Length of Machined Material: 135mm

Machining Accuracy: 0.07mm



Package Includes:

1 x Mini Lathe

1 x Adapter 

1 x Power Cord

1 x Accessory Package

1 x Machine Bottom Plate

1 x User Manual

• Machine tool with powerful motor, the motor box and spindle box for conjoined structure.
• Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover.
• Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal.
• Maximum motor power is 60W by using more powerful motor.
• Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.

User questions & answers

Question:	is good for metal
Answer:	The existing tool is .164 square by ~ 2" long. It can be reshaped with a grinding wheel. There wasn't a extra tool order form with the unit. There are cutter sets available from Grizzley and Harbor Freight Tools, but I have not ordered yet
Question:	Where can you buy the parts for the converted over to cnc thanks in advance
Answer:	It has a pass through hole but only 6mm
Question:	can this lathe process titanium, brass, tungsten, damascus steel etc
Answer:	8X8mm
Question:	does it come with any metal cutting tools
Answer:	120v

Product description

A 4 x 8 foot DIY CNC kit capable of making anything you can dream of. Based off of Maslow CNC’s design and endorsed by Maslow for distribution. USB flash drive with 10 sample projects. Purchasing your new Maslow CNC Router kit with MakerMade is just the start. Our Guarantee: At MakerMade, we maintain our commitment to our customer. Therefore, we pride ourselves on our service. If you ever have any issues with your purchase, let us know, and we’ll make it right. An open source CNC kit designed to let you make big beautiful things for yourself and others. To sum it up, we are makers first. In other words, we can’t wait to see what you make!

• GREAT VALUE: This 4 x 8 foot DIY CNC kit is a perfect introduction to large format CNCs. Includes some advanced features, such as Z-Axis functionality that eliminates the need to manually adjust cut depth during the project build. This kit is manufactured by MakerMade CNC and endorsed by Maslow for distribution.
• OPEN SOURCE: The software used to control your machine is called Ground Control. It is an open source software and easily installed on Mac, Windows, and Linux computers. It will serve as your means to calibrate your machine as well as manage your cuts.
• CHAIN DRIVEN: Our chain drive system has multiple benefits - it's a stronger alternative compared to belt system machines, and can easily be scaled up or down by changing the length of chain and the size of the frame.
• HIGH PERFORMANCE: This professional-quality machine tool can cut anything a traditional hand router can - including hardwoods; plywood; MDF laminate; hard plastics (acrylic, nylon, uPVC, hard PVC); soft plastics (polycarbonate, polyethylene, soft PVC). You will only be restricted by your bit size and router travel. The recommended Ridgid R22002 router has 1.5″ of travel. The machine will make multiple shallow passes to cut through thicker materials.
• 100% SATISFACTION GUARANTEE: At MakerMade, we maintain our commitment to our customer. Therefore, we pride ourselves on our service. If you ever have any issues with your purchase, let us know, and we’ll make it right. An open source CNC kit designed to let you make big beautiful things for yourself and others. We can’t wait to see what you make!

User questions & answers

Question:	What is the maximum area this will engrave
Answer:	Yes, it fits well Dremel 4000
Question:	can this accept any type of router bits, specifically a dovetail bit? what size collet does the maslow use
Answer:	Hi, VicenteIt can work with Dremel 4000, but has no wood cutting disk.Regards
Question:	Does this come with the Drive chain? as they are not show them on the picture
Answer:	Bits and pieces only work with that model out of this kit and honestly I will never buy another sanding drums fly apart within a matter of minutes don't mean to be negative but I hope you have better luck with the sanding drums and I did
Question:	What's in the box? This ad is very light on description
Answer:	It really depends on your drill, but for the most part it will fit. However, these would be extremely difficult to use a drill because the body of the drill will prevent you from getting a good angle on any workpiece. I would say buy a cheap rotary tool and you won't regret owning it. You can pick one up from the cheap tool (HF) store for $10. I'm sure even a $20 off brand on Amazon will suit you better than trying to use a full-sized drill. Anyways, best of luck.

• [PREMIUM QUALITY] - With the external dimension of 40x30x24cm (15.7"x11.8"x9.4"), frames and fixed parts are made of 2020 aluminum profiles & black injection molding material. Working Travel: 300(X)x180(Y)x45(Z)mm (11.8"x7.1"x1.8").
• [EASE OF USE] - According to the instructions, the machine is easy to assemble. Supports windows XP SP3, win7, win8, win10, (32/64) and Linux system.
• [CONVENIENT CONTROL] - Simply connect to computers via USB port and controlled by GRBL. An offline controller is also included for easy remote control without computers.
• [HIGH PERFORMANCE] - Comes with T8 screw rods driving units, three 42 stepper motors, and a 775 (12-36V)24V spindle motor with rotational speed of 10000r/min.
• [VERSATILE USE] - Used to engrave all types of plastics, soft aluminum, woods, acrylics, PVCs, PCBs, etc.

User questions & answers

Question:	What is the diameter of the spindle shaft
Answer:	In Minnesota I send them to Service Grinding in Blaine and they have done a great job. I am sure you could send them there contact Terri Thielen and tell here you were referred by Kim at Structural Wood Corporation. 1-877-297-6057 local 763-786-9652. Hope this helps.
Question:	Is there software to load to my laptop does it come with it or do I need to buy something else
Answer:	Mine did not.
Question:	What's the power supply specifications needed
Answer:	I bought the bag separately. I don't know for sure, but mine came with a straight out adapter for the bag to attach to, or the adapter came with the planer. Either way, I don't have an elbow with mine. Having the bag straight out the side has never been a problem and I think that it's better that way instead of back along the planer. Hope this helps you.
Question:	Can you install a rotating spindle to this unit
Answer:	Green plastic one!!!

Product features

Durable Material

Made of 2020 aluminum profiles and black injection molding material, which is of good appearance, high precision and durability.

3 Refined Axis

3 axis is able to realize plane engraving, with effective working travel of 300(X)x180(Y)x45(Z)mm (11.8"x7.1"x1.8"). The driving units consists of T8 stainless steel screw rods.

GRBL Control Board

Can be connected to a computer via a USB interface. Able to output 2P/3P, and support PWM, TTL functions, which can achieve greater practicality.

Offline Controller

A multifunctional offline controller is configured to remotely control the engraver without connecting to a computer.

Efficient Motors

Three 42 stepper motors are included on each of three axis for easy movement. The 775 (12-36V)24V spindle motor on Z axis is able to reach the speed of 10000r/min.

Wide Application

Capable of engraving all types of plastics, soft aluminum, woods, acrylics, PVCs, and a wide range of other soft materials.

Product description

Description:

Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack.



Feature:

Profile Dimensions: 33x40x24cm

Engraving area: 30x18x4.5cm

Spindle: 775 spindle motor

Softwear: GRBL control systems

support system: 24V 5.6A adapter

Stepper motor: fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M

Spindle: 775 spindle motor (12-36V) 24V:10000r / min

Supported System: Windows XP / Win 7 / Win 8 / Win 10 / Linux.

Drill bits: tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.

clamps: 4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm



Usage:

can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material.



Package inclued:

1pcs Full set engraving machine

1pcs offline controller

4pcs clamp

10pcs bits

1pcs extension rod with ER11 collet

(Please contact us for English manual after you purchased)

• 【MYSWEETY CNC 3018-PRO】- CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Working area: 30x18x4.5cm; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
• 【Offline Controller】- The offline controller is 1G Capacity. You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.
• 【New Control Board】- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty.
• 【Versatile】- This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials.
• 【Simple Assembly】- The package come with an English manual and the software on USB disk. 🍀〖Note: Plug in the power cord to the control board first, then press the power switch, and then turn on the control board switch 〗. Please contact us if you have any question. Thank you!

User questions & answers

Question:	Can I switch out the motor to ingrave a logo on stainless steel plates and make this work on metal
Answer:	hi, it can't work on metal, This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. thanks.
Question:	Will this machine cut out dollhouse furniture parts from wood
Answer:	Straight out of the box ... no. With modifications and upgrades ... yes. You wouldn’t want to cut the aluminum bed by mistake so a spoil board is a must. The spoil board should be milled flat and level. The collet that comes with the machine is 1/8”. You would probably need a 1/4” at a minimum for any serious work. The spindle motor works but is not very powerful. You will have to make multiple cuts to get all the way through pine or hardwood. The free software is engraving software. You would need to get real cad/cam software to create the tool paths to make a 3D part. The machine is very basic. What is there is a good starting point. I’ve been having fun playing with it and upgrading it.
Question:	Do you have a website where i can download the software and manual? i do not have an optical drive for the included cd
Answer:	Download the English manual : https://s3.us-east-2.amazonaws.com/3018pro/3018PRO_1.1.zip. If you have any question, please contact us firstly, thanks!
Question:	Hello can this machine cut as well as engrave
Answer:	Yes and no. It's NOT a router. Don't expect it to cut profiles out of 3/4" plywood. You could cut thin materials with it using the right bit, but you'll have a hard time finding 1/8" shank router bits at the hardware store. With the right bit, a good setup, and the proper programming to make shallow (0.005" or less) passes it can cut shapes out of wood or plastic. It will take a long time, but it can be done. I wouldn't recommend it if you're material is over 1/2" thick. If you want to make things out of thicker material you should look into CNC routers.

Product features

About product:

• Profile Dimensions: 33x40x24cm
• Engraving area: 30x18x4.5cm
• Spindle: 775 spindle motor(12-36V) 24V:10000r / min
• Software: GRBL control systems
• support system: Windows XP / Win 7 / Win 8 / Win 10.
• Stepper motor: fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
• Drill bits: tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.
• Clamps: 4 pcs, Hold the thickness of 0-30mm, the inner slot width 6mm

Upgrade Version CNC 3018 Pro

1：Manual control: manually adjust the position of the three axes of XYZ as the starting point of carving, manually open or close the spindle.

2：Document engraving: the offline board can be linked to the GRBL control board for carving without storing a computer.

3：Storage file: After the offline board is connected to the computer, it is recognized as a USB mass storage device, and the engraving file can be directly accessed.

The USB socket on the board showing [Reader] can be connected to the computer with the Android data cable.

Module Available:

If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the module kit to the machine. With this module, it can absolutely give you different ways to unleash your creativity. Both 2Pin and 3Pin module can be used.

Material that can be engraved:

The machine is quite neatly packed and it comes with an assembly instruction booklet.

• This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials.

Simple Assembly:

1. Connect the power supply and connect the USB; 2. Install the driver; 3. To Determine your Machine's COM port; 4. Open grblControl software

If you need the manual and software of this engraving machine, Please see the link in the third point description.

Package inclueds:

1pcs Full set engraving machine

1pcs offline controller

4pcs clamp

10pcs bits

1pcs extension rod with ER11 collet

• Profession：Integrated Components, fewer installation steps increase the stability of the body. stability improves the working accuracy .It is well known that precision creates miracles ,XYZ Working Area 300x180x45mm.
• Intelligent software: GRBL three-axis control board can be use on Win xp/Win7/Win8/Linux system. Reduce more operational problems .Picture format: JPG / PNG / JPEG/ BMP/ , Any other not clearly information please contact the seller before order.
• Quick assembly Version : All components of this 3018 pro cnc engraving machine made of industrial grade aluminum ,ENGRAVE METAL,just takes only about 20 minutes to complete assembly,adding XY axis manual adjustment ,a true industrial engraving machine fit more needs.
• We provide the video to guide how to install. Any question please contact our customer service team like don’t know how to use or some parts missing ,we will provide help as soon as .
• It means a lot for you: It can engrave on plastics, soft aluminum, woods, acrylics, PVC, and PCB. Create a unique gift for your lover, family，friends easily and quickly .satisfy your desire to create handicrafts perfectly .

User questions & answers

Question:	it can also cut material along with soft aluminum
Answer:	very light,maybe a couple of pounds,very handy
Question:	Can it cut 1/4" aluminum
Answer:	The conversion stand shown holding the planer inverted was made and sold by Makita. It was a complete kit, as show in that photo, the stand that holds the planer, the blade guard, all attaching pieces. Makita also made a sized down version for their smaller handheld planer. I bought them both, one different occasions, back about 1975 - 78. They were made by Makita and sold wherever the planers were sold. I bought mine from Jackson's Hardware in San Rafel, California.
Question:	where can i buy spare parts? I need a new x-axis rod. Please help. Thank you
Answer:	I love the way this planer shaves wood, and with their carbide tipped blades, softer plastics may very well be worked. In general, if others have successfully used carbide tipped blades for shaping plastics, then this tool may work for you.
Question:	What material does it made of
Answer:	we do not recommend running any tool on the incorrect voltage. makita makes a 220 version but is not sold in the usthanks,bts

Product description

1

• 【CNC 3018pro-M】- DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently.
• 【Come with 5.5W 5500mW module】 - Can be carved wood, bamboo, paper, leather, flammable plastic, PCB, PVC, acrylic(Only suitable for spindle milling cutter engraving). Can not work on metal, iron, glass, 201/304 stainless steel, jewelry, aluminum or silver.
• 【Large Working Area】- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8”), the 3018pro-M can easily accommodate most projects. Control software: GRBL; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
• 【New Control Board】- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty. （It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module.）
• 【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!

User questions & answers

Question:	What is the maximum RPM of the included spindle
Answer:	It is 10000rpm.
Question:	Can a z-axis probe be used with this cnc router
Answer:	Yes. If you are auto-leveling for a PCB milling operation, you simply connect a wire from A5 on the controller board to the cutter bit and make sure the copper-clad top surface of the PCB is grounded (negative side of power supply). When performing the Auto-level operation (probing), the Z-axis moves down until signal on A5 has been grounded. Using a separate probe may be a bit more complicated as the probe will probably require +5/+12 volts and/or GND. Still, the active-low probe signal is applied to A5. Using an active-high probe would probably require modification of the GRBL firmware. Do not apply more than +5V to the A5 input!
Question:	Could this carve and engrave pistol grips out of wood or plastic
Answer:	Yes, absolutely. But the quality may be hit or miss based on the end mill and material.
Question:	If vented properly, can this cut 1/2" or 3/4" polyurethane foam sheets? If so, will it leave a clean edge
Answer:	The cut foam board smells too strong. It is also easy to burn off the foam, so cutting the foam is not recommended. Thank you!

Product features

MYSWEETY DIY CNC 3018PRO-M

With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8”), the 3018pro-M can easily accommodate most projects. GRBL control systems; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.

Rated power: 60W; Maximum power: 120W

Step Motor: Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M

Drill Bits: Tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.