12 best hobby lathes

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

Features

- High-precision, stability, low noise.

- Designed for the home DIY enthusiasts, small and portable, strong power.

- Large torque ball bearing motor.

- Suitable for all small square or cylindrical timbers such as Pterocarpus santalinus, dalbergia odorifera, Thuja sutchuenensis, etc.

Specifications

Power:200W

Maximum processing length:140mm

Maximum processing width:50mm

Material: aluminum alloy

Maximum processing thickness 50 mm

Product size:310*60*65mm

Work way:manual

Voltage:DC12-24V

Adapter:

Input:110V-24V AC~50/60Hz 1.3A Max

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max

Adapter size:113*53*35mm

Package Included:

1x adapter

1x machine

1x 50mm Diamond Cutting Blade

1x 50mm HSS Cutting Piece

1x polishing wheel

5x sandpaper

1x caliper

1x grinding rod

3x drill

1x cable

6x carving blade

1x diamond blade connecting joint

1x high speed steel blade connecting joint

1x drill chuck wrench

1x Allen wrench

1x beads fixed needle 1.5/2.0/ 2.5MM

1x thread fixed needle

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.

User questions & answers

Question:	Can this be used in making wood turned pens
Answer:	It comes with the pieces to be able to perform all the functions that it displays, yes, however the size is on such a small scale that you are putting way more effort into trying to use this than you are getting out of it. This wasn't good for anything that I purchased it for, and isn't adaptable to larger scale pieces. Doesn't have a lot of power at all to perform any of the 'tasks' it boasts to accommodate.
Question:	can the chuck take 1/4 inch metal rod
Answer:	Don't buy from this company. The lathe they sent was very poorly made and we had an awful time returning it. Amazon had to get involved.
Question:	Is the chuck removable and if so, what is the diameter of the drive shaft
Answer:	It came with 1 tool
Question:	How is this machine cnc? is there a data port or card slot
Answer:	No, it doesn't. Actually I returned it unopened after buying it for this very reason. They were very understanding and refunded the full amount. As the description says it works well with "Plastic and Wood" but not metal.

• 【STURDY ALUMINIUM CONSTRUCTION】- The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
• 【INFINITELY VARIABLE SPEEDS】- Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
• 【ACCURATE 3-JAW CHUCK】- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004"(0.01mm).
• 【PROFESSIONAL COMPOUND REST】- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• 【WIDE APPLICATION】- Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

User questions & answers

Question:	Is this a Sieg C3 model mini lathe
Answer:	no problem ! this mine lathe can be used in making wood turned pens !
Question:	How do you remove the chuck
Answer:	fit a 1/4" pen mandrill. That is .014" over 6mm !
Question:	is this powerful enough to cut small titanium parts
Answer:	The chuck can be not removable ! the Chuck can be stuck : 0.6MM-6MM ! the diameter of the drive shaft is 10MM !
Question:	Does it come with any tools? If not, what is recommended
Answer:	sorry ! this machine is diy ! there is not a data port or card slot !

Product features

Heavy & Sturdy Machine

Features a 7 inch swing over bed, 13.78 inch distance between centers and 21mm spindle bore. Includes a thread range of 12-52 TPI, threading dial indicator and standard and metric handwheel graduations.

Infinitely Variable Speeds

Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The feed speed can be adjusted according to the requirements of different workpieces.

High Accuracy Chuck

3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.

Four-way Tool Post

T-slotted compound slide with four-way tool post, 4 blades avaliable at most, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever.

Professional Cross Slide

Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78").

Wide Applications

Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed.

550W 7" X 14" Variable-speed Metal Lathe With Nylon Gears

The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 0-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you.

Product description

Specifications: 

Power:200W 

Maximum processing length:140mm 

Maximum processing width:50mm 

Material: aluminum alloy 

Maximum processing thickness 50 mm 

Product size:310*60*65mm 

Work way:manual 

Voltage:DC12-24V 

Adapter: 

Input:110V-24V AC~50/60Hz 1.3A Max 

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max 

Adapter size:113*53*35mm 

Color: Shown as picture

Package list:Package list:

1x adapter 

1x machine 

1x 50mm Diamond Cutting Blade 

1x 50mm HSS Cutting Piece 

1x polishing wheel 

5x sandpaper 

1x caliper 

1x grinding rod 

3x drill 

1x cable 

6x carving blade 

1x diamond blade connecting joint 

1x high speed steel blade connecting joint 

1x drill chuck wrench 

1x Allen wrench 

1x beads fixed needle 1.5/2.0/ 2.5MM 

1x thread fixed needle

• ☪ Good choice for the both indoor and outdoor DIY enthusiasts, portable size enable users easy to carry.
• ☪ Nice designing, The large torque ball bearing motor, rotating speed range from 4000-9000RPM, can provid ultra strong cutting power with lower noise.
• ☪High-precision tailstock, flexible scaling adjustment. Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• ☪ 7power levels adapter enable you to adjust the rotating speed to meet different cutting speed.It is easy and safe to operate.
• ☪ High quality aluminum alloy base and pure steel structure drill chuck.Multiple accessories for operating.

User questions & answers

Question:	can the seller send/email me a copy of the 'how to' manual in English
Answer:	sure...just been figuring it out as I go along. thank you that manual will come in handy for us
Question:	Is there an instruction manual for this product
Answer:	Yes, some stock we sold did not have mannual, but now we aaked the maunfcature to provide. you will get a mannual if you buy it in the future. if you buy now, you can contact me after you bought, we will sen d you a file about the products.
Question:	When can I expect to receive the instruction manual
Answer:	You can contact us if there is no mannual. and i will send you a instruction file through the reply message, usually within 24 hours.
Question:	is the center tailstock MT1 or MT
Answer:	sorry we do not know. But, my husband says that the tailstock that came with it...did not fit!@!@

Product description

MicroLux 8 x 12 Wood Turner's Lathe is a combination of power, heft and durability. Compact in size but large in capability, this lathe fits easily on top of your workbench and will provide endless hours of wood turning enjoyment. Just some of the fun items to make are pens, bowls, candle sticks, doll house newel post and finials, honey dippers, candy dishes, vases, pepper grinders, ship yards, spars and masts even Christmas trees and ornaments. Features include variable speed (750 – 3200 rpm) 1/3 hp motor, 8" swing over bed, 12" length capacity, head spur drive, live tailstock center, 5-3/4" face plate, heavy duty cast iron base and 7" tool rest. Weight: 41 lbs. loaded; footprint: 28" long x 10" wide x 13" high.

• Spindle has 1" x 8 tpi external threading.
• MicroLux 8 x 12 Wood Turner's Lathe is a combination of power, heft and durability.
• Compact in size but large in capability.
• Weight: 41 lbs. loaded; footprint: 28" long x 10" wide x 13" high.

Product description

Application:

Youth Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum Student Science and Technology Creation.

Main parts of the machine:

The main components of the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on are made of metal. The quality of the product is improved, more durable and more precise.

Parameter:

●Input voltage: AC100V~240V 50/60HZ

●Output voltage : DC12V 2A

●Motor rated power: 24W

● Motor speed: High speed motor 20000r/min ± 15%

● Low speed motor: 10000r/min ± 15%

● Spindle speed: high speed motor 3000r/min±15%

● Low speed motor: 1600r/min ± 15%

● Spindle jump: <0.1mm

● Large slider stroke: 45mm

●Small slider stroke: 35mm

●Center height: 25mm

●Center distance: 110mm

●Maximum processing diameter: 13mm positive claw, 45mm reverse claw

●Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw

●Handle scale: 0.1mm/division

●Packing size: 230mm*200mm*315mm

●Weight: 2.2KG

●Connection method: M12 * 1 screw hole

●Minimum clamping size: 1.5mm * 1.5mm

●Maximum clamping size: 18mm * 18mm

●Processing ability: It can process soft metals such as copper and aluminum.



Package include：

1x A set of min lathe

• This is a mini desktop lathe which can used for turning, drilling, boring, threading and other processing.
• Made of advanced aluminum alloy, durable and non-deformable for usage.
• Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal
• Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw
• Processing ability: It can process soft metals such as copper and aluminum.

User questions & answers

Question:	Is this a true CNC lathe with stepper motors installed
Answer:	It only has a stepper motor in the head. Its a manual lathe.
Question:	Can this cut copper for jewelry like rings
Answer:	Dear friend, Sure. It can cut Wood and Soft Metals. It is teaching equipment.
Question:	can the bed be extended
Answer:	Yes, Long base block available on AliExpress CHINESE!!!! web site. Search mini late parts.
Question:	Do you have a quick change tool post holder for this mini lathe
Answer:	I'd just make something

Product description

This is the video for how to use it: https://www.youtube.com/watch?v=Q03KevOqizM

Description:

This is a mini Buddha bead machine, compact and portable size, powerful woodworking lathe and beautiful appearance.

It also fits other DIY usage such as model,hobby DIY.

Specifications:

Material: Aluminum Alloy + Acrylic

Color: Silver

Plug Type: US Plug

Voltage: AC 100-240V 50/60Hz

Rated Voltage: 12-24V DC

Rated Power: 100W

Rated Speed: 1500-7000RPM

Power: 7 Level of Adjustable Speed

Processing Length: 140mm / 5.51in

Processing Diameter: 55mm / 2.16in

Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in

Swing Diameter: max 50mm / 2.0in

Grip Length: max 140mm / 5.51in

Matching Saw Blade Diameter: max 50mm / 2.0in

Machine Weight: 1436g / 3.17 lb

Package Included:

1x Mini Lathe Beads Machine

1x Speed Control Power Supply (12-24V)

6x Wood Carving Blade

1x Screw Thread Fixed Needle

3x Hex Shank Fixed Needle

1x Collet Wrench

1x Hexagon Wrench

3x Beads Round Device(12,18,22mm)

1x 50mm Cutting Piece

1x 50mm Diamond Cutting Piece

1x Polishing Plate

5x Polishing Piece

1x Polishing File Tool

1x Mini Caliper

NOTE:

1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations.

2. The speed can be adjusted in 1500-7000RPM, speed of cutting wood should not exceed 4000, grinding can use higher speed.

3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4. If not a cylinder, the speed should be reduced.

5. Tailstock bearing without lock tight.

6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.
• Super large torque ball bearing motor, maximum rotating speed up to 7000RPM providing ultra strong cutting power with low noise, you can use it at home.

User questions & answers

Question:	Is this lathe just for producing beads? Or can it be used for other small projects
Answer:	Hello friend, Yes,of course it can be used for other small projects.As long as the the sizes of the tools match your project,this is a DIY tool set.
Question:	Can i make pens and rigs on it
Answer:	NO you can not make pens or rigs, there is not enough power to do anything on it.
Question:	is the plastic cover removable
Answer:	Hello friend, If you don't want the plastic cover,you can disassembly it with the screws.
Question:	I just bought this. How do i get it to fit my 5/8 mandrel. I bought this to make duck calls. But cant figure out what i need to make it fit.what do i
Answer:	Swap out chuck.

Product description

Parameter:

Material: aluminum alloy and Acrylic

Power: 100W

Voltage: 24V DC

Speed: 4000-8000 r / min, 7 grade speed

Size: 310* 60 * 70mm

Maximum turning diameter: 70mm.

Maximum clamping length: 180mm.

Chuck clamping range: 0.6-6mm.

Power Adapter：

Input: AC110V- 240V~50/60Hz 1.5A max

Output:12/15/16/18/19V 4.5A max; 20/24V 4A max

Wire length:1.1m+1.1m

Features:

High-precision, stability, low noise;

Designed for the home DIY enthusiasts, small and portable, strong power;

Transparent plexiglass shield, super convection cooling holes;

Large torque ball bearing motor.

Precautions:

1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.

2.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

3.If not a cylinder, the speed should be reduced.

4.Tailstock bearing without lock tight.

5. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

Package include:

1x Buddha Beads Lathe

1x Power Adapter

6x Wood carving set

3x Hex shanks(1.5mm,2mm,2.5mm)

Warm Notice: dear customers, your satisfaction is our top pursuit, if you receive any defective items, please never hesitate to contact us, we offer 30days return policy. thank you!

• Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch)
• Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm
• High-precision, stability, low noise, aluminum alloy materials, CNC machining.
• Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes.

User questions & answers

Question:	I need a new tailstock center for my lathe like this. where can I get one please
Answer:	if you need a new tailstock center ! Please contact us at [email protected] ! We guarranty a satisfied solution to you.
Question:	Can this be used to turn hardwood
Answer:	so donot worry ! The mini lathe can turn hardwood !
Question:	Is there a longer bed available
Answer:	Yes you can buy this on amazon to the length you want. extruded aluminum t slot 1x2 then mount the motor and the end holder on to the new bed and ypur good. But at some point the motor will not be able to handle it so motor upgrade may be needed.
Question:	Can this be use for wood ring making
Answer:	I have used this for making wood rings, but primarily the sanding and polishing of bentwood rings made from painstakingly rolled wood veneer. Would not recommend for any kind of cutting, as it doesn't have the power.

• 【550W POWERFUL MOTOR】- The powerful motor starts softly ensuring motor's maximize safety and low noise. 550W provide great power for the lathe operation.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust the speed freely within 500-3800 RPM. MT2 Spindle. It is easy to read via digital speed display.
• 【LARGE WORK CAPACITY】- 18" (460mm) distance between centers, swing over bed 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 6" (150 mm) tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What is the warranty on this lathe
Answer:	One year
Question:	is there somewhere I can find an owner’s manual
Answer:	Go to harbor freight web sight look up central machianery 10x18 lathe it has a pdf for the owners manual it's the same machine as the morphon
Question:	My motor burned out, where do I get a replacement
Answer:	Good luck with that. The control switch burned out on mine and after communicating with them for awhile to arrange a fix they just stopped answering by emails. All my emails to them and Amazon went unanswered. Now all I have is a boat anchor. I only had it 3 or 4 months. Good luck.
Question:	what is the spindle thread
Answer:	Depending on what you are trying adapt to your spindle , you should not need a adapter just make sure its a 1" x 8tpi . I made the mistake of buying an adapter 33x3.5 to1"x8tpi and it wont fit down the spindle shaft again just a 1"x 8tpi for a self centering jaw or any other plate,ect.ect plus try not to use adapters if you can

Product features

Powerful Motor

550W Power motor, turning speed 500-3800 RPM, Voltage: 120V/60Hz. Our powerful motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3800 RPM variable speed. MT2 Spindle.

Large Work Capacity

Distance between centers: 18" (460mm). Swing over bed: 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Mini lathes constructed by cast iron are of increased stability and smooth operation.

Interchangeable Tool Rests

6" (150 mm) tool rest can be adjusted to any position and direction for various needs in turning applications.

Wide Application

Benchtop wood lathe, an ideal tool for use in labs, workshops, engineering, and education.

10'' x18'' Benchtop Wood Lathe

The premier quality wood lathe features with a powerful motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments, make this lathe a top choice. Heavy-duty cast iron construction and rubber feet provide increased stability and smooth turning operation.

Product description

This is the video for how to use it: https://www.youtube.com/watch?v=Q03KevOqizM

Description:

This is a mini Buddha bead machine, compact and portable size, powerful woodworking lathe and beautiful appearance.

It also fits other DIY usage such as model,hobby DIY.

Specifications:

Material: Aluminum Alloy + Acrylic

Color: Silver

Plug Type: US Plug

Voltage: AC 100-240V 50/60Hz

Rated Voltage: 12-24V DC

Rated Power: 100W

Rated Speed: 1500-7000RPM

Power: 7 Level of Adjustable Speed

Processing Length: 140mm / 5.51in

Processing Diameter: 55mm / 2.16in

Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in

Swing Diameter: max 50mm / 2.0in

Grip Length: max 140mm / 5.51in

Matching Saw Blade Diameter: max 50mm / 2.0in

Machine Weight: 1436g / 3.17 lb

Package Included:

1x Mini Lathe Beads Machine

1x Speed Control Power Supply (12-24V)

6x Wood Carving Blade

1x Screw Thread Fixed Needle

3x Hex Shank Fixed Needle

1x Collet Wrench

1x Hexagon Wrench

NOTE:

1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations.

2. The speed can be adjusted in 1500-7000RPM, speed of cutting wood should not exceed 4000, grinding can use higher speed.

3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4. If not a cylinder, the speed should be reduced.

5. Tailstock bearing without lock tight.

6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.
• Super large torque ball bearing motor, maximum rotating speed up to 7000RPM providing ultra strong cutting power with low noise, you can use it at home.

User questions & answers

Question:	Can you use a 3 jaw with this? I want to make resin eggs and cant sand the other side of the egg
Answer:	Dont see why not!!!
Question:	what is the longest piece of wodd I can put in this
Answer:	Hello friend, The longest piece of wood we suggest is about 13cm.

Product description

Application:

Youth Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum Student Science and Technology Creation.

Main parts of the machine:

The main components of the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on are made of metal. The quality of the product is improved, more durable and more precise.

Parameter:

※Input voltage: AC100V~240V 50/60HZ

※Output voltage : DC12V 2A

※Motor rated power: 24W

※ Motor speed: High speed motor 20000r/min ± 15%

※ Low speed motor: 10000r/min ± 15%

※ Spindle speed: high speed motor 3000r/min±15%

※ Low speed motor: 1600r/min ± 15%

※ Spindle jump: <0.1mm

※ Large slider stroke: 45mm

※Small slider stroke: 35mm

※Center height: 25mm

※Center distance: 110mm

※Maximum processing diameter: 13mm positive claw, 45mm reverse claw

※Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw

※Handle scale: 0.1mm/division

※Packing size: 230mm*200mm*315mm

※Weight: 2.2KG

※Connection method: M12 * 1 screw hole

※Minimum clamping size: 1.5mm * 1.5mm

※Maximum clamping size: 18mm * 18mm

※Processing ability: It can process soft metals such as copper and aluminum.



Package include：

1x A set of min lathe

• ★This is a mini desktop lathe which can used for turning, drilling, boring, threading and other processing
• ★Made of advanced aluminum alloy, durable and non-deformable for usage.
• ★Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal.
• ★Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw.
• ★Processing ability: It can process soft metals such as copper and aluminum.

User questions & answers

Question:	Why do you misrepresent this as a metal lathe when its only suitable for wood
Answer:	Our mini metal lathes are not only suitable for wood, but also for Plastic, Aluminum, Copper and other Soft Metal.
Question:	How is it a cnc i don't see it
Answer:	If you have any questions, you can email us for one-on-one help, we are happy to solve it for you.
Question:	Can this lathe handle steel
Answer:	No
Question:	What arbor size tailstock drill chuck works with this machine
Answer:	this was a pos ran onnce and stoped

• 【1/3 HORSE POWER MOTOR】- 1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM. MT1 Spindle.
• 【LARGE WORK CAPACITY】- 12" (305mm) distance between centers, swing over bed 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 150mm & 300mm tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What 3 or 4 jaw chuck will fit a mophorn 8 ×12 lathe
Answer:	Any chuck that fits on a 1" 8 TPI spindle and has an external diameter of 5" or less will work fine.
Question:	hi can i work 220v? i need 220v
Answer:	This model, sold in the the US version of Amazon is 120V only.
Question:	What size chuck do i need to get im looking for a 4 inch but i dont know which will fit this
Answer:	The lathe spindle is 1" 8 TPI. Any 4" chuck that matches that spindle size should work fine.
Question:	Can this unit be extended
Answer:	No. There are no attachment mechanisms to extend the bed, and there are no bed extensions available that match it.

Product features

Powerful Motor

1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. Our powerful 1A motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3200 RPM variable speed. MT1 Spindle.

Large Work Capacity

12" (305mm) distance between centers, swing over bed 10" 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Interchangeable Tool Rests

Two different-sized tool rests with 150mm & 300mm for various needs in turning applications.

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

8 x 12 inch Variable Speed Benchtop Mini Wood Lathe & Variable Speed 500-3200RPM

Our 8 in. x 12 in. Variable Speed Benchtop Mini Wood Lathe features variable speed 500-3200 RPM, a 1/3hp motor and an MT1 spindle. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for various uses in labs, workshops, engineering and education.