13 best grizzly wood lathes

• Motor: 3 HP, 220V, 3-phase
• Required power supply: 220V, single-phase, 20A
• Swing over bed: 22"
• Swing over tool rest base (banjo): 18"
• Swing over tool rest: 16"

User questions & answers

Question:	Are you able to adjust the height of the stand? I am 5'2" and need to adjust
Answer:	There is no adjustment, there are leveling feet. even if you took off the feet you would only gain 2 inches. the best thing to do is to make a platform that you stand on. I like, it has been working well for me.
Question:	Does the headstock rotate easily
Answer:	The head unit does not rotate on this machine
Question:	Is this 110v or 220v
Answer:	Its 220v
Question:	Does the headstock rotate easily
Answer:	It does NOT rotate.

Product features

3 HP 22" x 42" Wood Lathe with Variable Frequency Drive

This lathe is perfect for serious woodturners who want to turn large bowls, furniture pieces, and other large-diameter projects. With 22" of swing, a heavy-duty 1-1/4" x 8 TPI RH spindle, electronic variable speed control, and a 3 HP, 3-phase motor that runs off single-phase power using a variable-frequency drive, this lathe has plenty of clearance and torque to easily rough-out big projects at low speeds. The heavy-duty cast-iron bed and stand make this lathe extremely stable, and the headstock can be positioned anywhere along the bed, giving you a wide range of control and flexibility with your projects. Check out all the great features below!

17-1/2" Long Toolrest Base

Electronic Variable-Speed Spindle Control with Digital Spindle Speed Readout

4-1/4" Tailstock Barrel Travel

Headstock Positions Anywhere Along the Bed

Specifications:

• Motor: 3 HP, 220V, 3-phase
• Required power supply: 220V, single-phase, 20A
• Swing over bed: 22"
• Swing over tool rest base (banjo): 18"
• Swing over tool rest: 16"
• Distance between centers: 42"
• 1-1/4" x 8 TPI RH headstock spindle
• MT#2 headstock and tailstock tapers
• Variable speed: 100-3200 RPM
• Tool rest width: 14"

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

• Motor: 3/4 HP, 110V, single-phase, 8A
• Swing over bed: 14"
• Swing over tool rest: 10"
• Distance between centers: 20"
• Tool rest width: 8"

User questions & answers

Question:	is it 5.3 amp
Answer:	The power Requirement is 110V, Single-Phase, 60 Hz. It has a full-load current rating of 8A. The minimum circuit size is 15A.
Question:	How much dose this weight
Answer:	The machine weighs 110lbs.
Question:	Does it have the option of outboard turning
Answer:	Yes. The outboard spindle thread direction is right handed. The outboard spindle size is M20 x 1.5.
Question:	Is this lathe reversible
Answer:	The G0844 14" X 20" Variable Speed Benchtop Wood Lathe does have a forward and reverse setting.

Product features

3/4 Horsepower 14" x 20" Variable Speed Benchtop Wood Lathe with Digital RPM Tachometer

Our largest swing benchtop lathe, this machine will take your projects to the next level. Its 20" x 14" capacity can turn a large range of spindles and bowls, and it's 15° indexing spindle supports veining and fluting operations - something you can't do on most other benchtop models! The G0844 features a generous 8" tool rest, built-in carry handles on both ends that double as tool storage, rear cord wrap, an easy-access door for changing speed ranges, and a variable-speed spindle-speed tachometer, all cast iron construction, and adjustable vibration-dampening rubber feet. You'll see why we call this the Benchtop Boss!

Easy-Access Door for Belt Changes

Variable Speed - Three Speed Ranges

8" Tool Rest with 1" Post

Carrying Handles on Each End that Double as Tool Holders

Specifications:

• Motor: 3/4 HP, 110V, single-phase, 8A
• Swing over bed: 14"
• Swing over tool rest: 10"
• Distance between centers: 20"
• Tool rest width: 8"
• Tool rest post size: 1"
• 1" x 8 TPI RH headstock spindle
• MT#2 spindle & tailstock tapers
• Indexing spindle: 15°
• Variable speed: 300-3300 RPM

Product description

Remember when you could turn bowls, cups, chess pieces, table legs and more? It’s time to turn some heads with the WEN 12-Inch by 18-Inch Variable Speed Wood Lathe. Boasting a 4.5A motor, this beast handles wood up to 18 inches long and 12 inches in diameter. If you need to take on anything larger, the WEN 3424EX Bed Extension can be purchased separately to increase the maximum capacity from 18 inches all the way up to 41 inches. Adjust the variable speed anywhere from 450 to 3500 rotations per minute with the onboard digital speed display illuminating the current RPM. The WEN Variable Speed Wood Lathe also features an MT2 spindle and tailstock taper for compatibility with all your favorite chucks and centers, along with a spacious 8-inch tool rest to provide support for your chisels and tools. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. Soft startups prevent damage to both your workpiece and your motor. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn heads with your woodturning? Remember WEN.

• Adjust the variable speed anywhere from 450 to 3500 rotations per minute
• Attack workpieces up to 12 inches wide and 18 inches long
• Soft startups prevent damage to both your workpiece and the 4.5-amp motor
• Includes a digital speed display, an 8-inch tool rest, a face plate, a live center, a spur center, and a two-year warranty
• Increase the capacity to 12 x 41 inches with the WEN 3424EX Table Extension (sold separately)

User questions & answers

Question:	Why is there a forward and reverse button on it
Answer:	There is a forward and reverse button on the model 34034..
Question:	Is it reversible
Answer:	No. Just variable speed.
Question:	multi directional
Answer:	No this is not multi directional
Question:	Does this tilt so you can make bigger projects than a 14in
Answer:	I have no clue what you mean by does it tilt. Probably Bc I'm not a woodworker, but I do know the end peice comes off and u could potentially make something bigger but you would need to find a way to stabilize the other end. Also, I'm turning plaster and once I go longer than 9in the machine will shutter. Hope this helped.

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.

Product description

The new JET 1015VS is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15" mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

• 15-1/2" BETWEEN CENTERS
• THREE SPEED RANGES: 200-1,050 / 300-1,750 / 600-3,600
• INTEGRATED 24-POSITION INDEXING
• EASY ACCESS TO BELTS: Improved tensioning system
• INCREASED RIGIDITY: Wider bed ways

User questions & answers

Question:	Does this lathe come with a stand
Answer:	No but one if available as an accessory.
Question:	Can I get parts in Canada for this lathe? Can it be shipped to canada
Answer:	CPO Outlets does not ship to Canada. For support in Canada, please contact Jet directly for guidance at 888-274-6848.
Question:	How accurate is the headstock to tailstock alignment
Answer:	As best I can tell, on mine it is very accurate.
Question:	Does this lathe have a reverse
Answer:	No, mine doesn’t. The larger, more expensive models may.

Product features

JET 10" x 15" Variable Speed Wood Lathe - JWL-1015VS

The new JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

• Motor: 1/2 HP, 110V, single-phase
• Amps: 7
• Swing over bed: 10"
• Distance between centers: 18"
• Swing over tool rest: 6-1/4"

User questions & answers

Question:	What’s longest piece of wood i can turn with this lathe
Answer:	If you are using a standard four prong spur center and with the quill retracted all the way back on the tail stock, you are looking at a piece about fourteen inches. If you are using a chuck ( I have the PSI Barracuda), you are looking at around a 13-1/2" turning. Good luck!
Question:	Does it come with a Faceplate? If not what type would be best
Answer:	Yes, it does. Suggest you also get a Jacob's chuck so that you can clamp onto the tenon on the pieces you'll be working on. What it doesn't come with is a knockout rod, for removing the live center. I picked up a 3/8" dowel at the hardware store and it's working fine.
Question:	Can i make pens and pencils with it
Answer:	Just make sure you don't over tighten the quill on your tailstock, otherwise you will bend the mandrel, making it useless.
Question:	Can you turn bowls withs this lathe and does it have the chuck to do so or must you buy it separately
Answer:	You can turn up to an 8" bowl and still get the tool rest underneath it. You do need to get the chucks separately tho. I'd recommend a chucking system by Nova or PSI to get yourself started. You'll pay a little more up front, but you'll be far better off than getting a bunch of different chucks.

Product features

1/2 Horsepower 10" x 18" Benchtop Wood Lathe

This bench top wood lathe is a sold and gets the job done for an affordable value. Sturdily built, it is great for small wood turning projects like pens or bowls. Speed ranges from 826-3337 RPM enables you to work on a variety of different projects. This machine is quiet and there is no vibration and features above average 18" between centers for bench top lathes. The adjustable leveling feet and tool rest allow you to make this lathe fit your needs comfortably.

5 Spindle Speeds Ranging 826-3337 RPM

Adjustable Leveling Feet

5-3/4" Tool Rest

Includes Live Center and Spur Center

Specifications:

• Motor: 1/2 HP, 110V, single-phase
• Amps: 7
• Swing over bed: 10"
• Distance between centers: 18"
• Swing over tool rest: 6-1/4"
• Tailstock travel: 3-1/4"
• Speeds: 826, 1205, 1713, 2422, 3337 RPM
• Tool rest width: 5-3/4"
• Includes tool rest, live rolling center, spur center and wrenches
• Overall dimensions: 36" L x 11-1/2" W x 15" H

Product description

The JET JWL-1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... start here.

• 15-1/2" BETWEEN CENTERS
• SIX SPINDLE SPEEDS: 500/840/1,240/1,800/2,630/3,975
• Integrated 24-position indexing
• IMPROVED TENSIONING SYSTEM: Easier access to belts.
• INCREASED RIGIDITY: Wider bed ways.

User questions & answers

Question:	Can you add an extendion table on it to turn long spindel legs
Answer:	Yes! You just can't buy it on amazon..rockler and woodcraft sell them for around $150.
Question:	Is it a Morse taper
Answer:	Yes both the head stock and tail are #2
Question:	what is needed with this lathe for pen turning
Answer:	Basically, you will need a 7mm MT2 mandrel and your tools. When you order your pen kits, make sure you get the bushings and drill bit. Depending on how you finish the pens, you may need a buffing system. For acrylics, get a set of micro pads, they really bring the shine out. I also use a "french polish" and shellac to put a lasting hard coat on the finished product. Good luck and enjoy the lathe.
Question:	what is the thread size on the head stock
Answer:	Headstock Spindle Thread is 1" x 8 TPI.Complete data sheet is here:http://content.jettools.com/assets/manuals/719100_man_EN.pdf

• 【1/3 HORSE POWER MOTOR】- 1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM. MT1 Spindle.
• 【LARGE WORK CAPACITY】- 12" (305mm) distance between centers, swing over bed 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 150mm & 300mm tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What 3 or 4 jaw chuck will fit a mophorn 8 ×12 lathe
Answer:	Any chuck that fits on a 1" 8 TPI spindle and has an external diameter of 5" or less will work fine.
Question:	hi can i work 220v? i need 220v
Answer:	This model, sold in the the US version of Amazon is 120V only.
Question:	What size chuck do i need to get im looking for a 4 inch but i dont know which will fit this
Answer:	The lathe spindle is 1" 8 TPI. Any 4" chuck that matches that spindle size should work fine.
Question:	Can this unit be extended
Answer:	No. There are no attachment mechanisms to extend the bed, and there are no bed extensions available that match it.

Product features

Powerful Motor

1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. Our powerful 1A motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3200 RPM variable speed. MT1 Spindle.

Large Work Capacity

12" (305mm) distance between centers, swing over bed 10" 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Interchangeable Tool Rests

Two different-sized tool rests with 150mm & 300mm for various needs in turning applications.

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

8 x 12 inch Variable Speed Benchtop Mini Wood Lathe & Variable Speed 500-3200RPM

Our 8 in. x 12 in. Variable Speed Benchtop Mini Wood Lathe features variable speed 500-3200 RPM, a 1/3hp motor and an MT1 spindle. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for various uses in labs, workshops, engineering and education.

• 【STURDY ALUMINIUM CONSTRUCTION】- The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
• 【INFINITELY VARIABLE SPEEDS】- Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
• 【ACCURATE 3-JAW CHUCK】- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004"(0.01mm).
• 【PROFESSIONAL COMPOUND REST】- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• 【WIDE APPLICATION】- Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

User questions & answers

Question:	Is this a Sieg C3 model mini lathe
Answer:	no problem ! this mine lathe can be used in making wood turned pens !
Question:	How do you remove the chuck
Answer:	fit a 1/4" pen mandrill. That is .014" over 6mm !
Question:	is this powerful enough to cut small titanium parts
Answer:	The chuck can be not removable ! the Chuck can be stuck : 0.6MM-6MM ! the diameter of the drive shaft is 10MM !
Question:	Does it come with any tools? If not, what is recommended
Answer:	sorry ! this machine is diy ! there is not a data port or card slot !

Product features

Heavy & Sturdy Machine

Features a 7 inch swing over bed, 13.78 inch distance between centers and 21mm spindle bore. Includes a thread range of 12-52 TPI, threading dial indicator and standard and metric handwheel graduations.

Infinitely Variable Speeds

Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The feed speed can be adjusted according to the requirements of different workpieces.

High Accuracy Chuck

3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.

Four-way Tool Post

T-slotted compound slide with four-way tool post, 4 blades avaliable at most, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever.

Professional Cross Slide

Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78").

Wide Applications

Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed.

550W 7" X 14" Variable-speed Metal Lathe With Nylon Gears

The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 0-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you.

Product description

Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded spool mechanism for infinite adjustment. Includes 8-Inch Outside Caliper, 8-Inch Inside Caliper, and 8-Inch Divider.

From the Manufacturer

Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded spool mechanism for infinite adjustment. Includes 8-Inch Outside Caliper, 8-Inch Inside Caliper, and 8-Inch Divider.

• Big Horn outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler
• Big Horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler
• Big Horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal
• Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set
• The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment

User questions & answers

Question:	If these are stainless steel like advertised then why are they coated in oil put in a plastic sealed bag and shipped 1/2 way around the world
Answer:	I can't comment on why shipping stainless steel is such a perceived issue to you, but even if the calipers are stainless steel, the springs are not. I would venture to guess that is the main reason they are oiled.
Question:	can you lock in the measurement with these
Answer:	That is what the nut on the screw is for. It doesn't really lock, if you were to rub the nut on something it could move, and it can spring inward it you push into a hole.
Question:	stainless steel? NOT
Answer:	I have no means to test chromium content of this metal, but by 2 factors, I would venture to say that they ARE stainless steel. 1. They have been in my shop thru summer rain and heat, it is now February the 1st and there are still no visible signs of rust which would certainly be present on carbon steel materials under these storage conditions. 2. By all appearances (visually) they are comparable to any other stainless steel items I have used throughout my 45 years of woodworking. I would admit that, also visually, they may have a lower chromium content in their alloy than a comparably sized more expensive set, but they do the job I purchased them for at price much less than is really needed for my processes. Certainly, a $500 set would be nice, but then I'd have to jack my prices up, or sell 10 times more product to compensate, when these work just fine.
Question:	It's nice to know how long they are, and if I measured the pic..., but the maximum measurement is a more useful number. How wide does each get
Answer:	When it comes to calipers, digital or manual the number ie; 8", 6" etc. represents the opening of the caliper. This set of calipers all open little more than.

Product features

Helps with Accurate Measurements

The Big Horn 19053C 3 Pieces 8-Inch Spring Caliper/Divider Set is super utilitarian when working with round stock or oddly shaped materials when you want to transfer the readings to a ruler. They work great for gauging the inner diameter of an opening and then transferring that measurement to a ruler.

Sturdy and Durable

Useful for uneven surfaces, the Big Horn 19053C 3 Pieces 8-Inch Spring Caliper/Divider Set works great for a variety of uses such as tracing contours and scribing circles into metal. The hardened and tempered bow springs and fulcrum spools give you uniform tension while working with these tools.

Product description

Wood turners who enjoy making large bowls, vases, furniture pieces, and other Large-Diameter projects require power, capacity and high-torque to meet their performance needs. You get all three and then some with this burly Lathe that weighs in at over a quarter-of-a-ton. With a 3 HP, 3-Phase motor that runs off of Single-Phase power, electronic variable speed control, 22" of swing, and 1-1/4" x 8 TPI RH Spindle, this Lathe delivers the goods to gratify even the most discerning of turners. Features a variable speed range of 100 – 3200 RPM, perfect for both large and small turning projects and finishing.

• Motor: 3 HP, 220V
• Swing over bed: 22", distance between centers: 42"
• Variable speed: 100–3200 RPM
• Tailstock, headstock, and tool rest support have lever-action CAM locks for quick positioning
• Forward/reverse spindle control

User questions & answers

Question:	What is the maximum degree the headstock can swing for outboard turning
Answer:	The headstock does not swivel (or swing) at all. The headstock can be released and can slide down the bed to the far end. The oversize banks can then hang out past the lathe bed. This lathe can swing a 22 inch blank over the bed. The advantage to this, is you never have to realign the headstock to the tailstock. I have not seen any sort of outboard tool rest from Shop Fox. Other manufactures do make them. I love my W1852.
Question:	Does this lathe have an optional bed extension which will fit it
Answer:	It has 42 inches between centers. I have this lathe, enjoy it very much. I have not found any type bed extension. The headstock can be easily moved down the bed and the tasilstock removed, to give better access for bowl work. Bill

Product features

SHOP FOX W1852 VARIABLE SPEED WOOD LATHE

Wood turners who enjoy making large bowls, vases, furniture pieces, and other large-diameter projects require power, capacity and high-torque to meet their performance needs. You get all three and then some with this burly lathe that weighs in at over a quarter-of-a-ton. With a 3 HP, 3-phase motor that runs off of single-phase power, electronic variable speed control, 22" of swing, and 1-1/4" x 8 TPI RH spindle, this lathe delivers the goods to gratify even the most discerning of turners.

Variable Speed Range

This beast features a variable speed range of 100 – 3200 RPM, perfect for both large and small turning projects and finishing.

Changing Speed Ranges

The pulley belt configurations provide two speed ranges. To maximize the spindle torque, use low spindle speed range for spindle feeds of 1200 RPM or less.

Cam-Action Clamping System

Shop Fox W1852 headstock is equipped with a cam-action clamping system to secure it to the lathe bed. When the lever is tightened, a locking plate lifts up underneath the bed and secures the headstock in place. The headstock can be positioned anywhere along the lathe bed.

Adjusting Tailstock

The tailstock adjusts in the same manner as the headstock. Make sure both the headstock and the tailstock are firmly locked to the lathe bed.

Outboard Turning

Outboard turning is a variation of faceplate turning and is accomplished with the headstock positioned so the faceplate is not directly over the bed, allowing a larger turning capacity than the swing specification of the lathe.

When outboard turning, ALWAYS use a floor-mounted tool rest and keep tool in contact with rest during all turning operations.