12 best wen woodworking tools

Product description

Remember when you could sand the finest details of your workpiece? smooth out tight corners and strange contours in wood, metal, plastics and more with the WEN variable speed detailing file sander. The narrow 1/2-by-18-inch belt pivots 55 degrees to meet the particular needs of the project at hand. The auto-tracking design allows for automatic alignment of the sanding belts without the need for any adjustments. Easily switch between grits with the tool-free belt changing system or adjust the variable speed dial for speeds anywhere from 1080 to 1800 feet per minute. This handheld 2-amp belt sander weighs in at a mere 2-1/2 pounds with a compact body for squeezing into tight spaces and awkward angles. Minimize cleanup by hooking the sander up to a dust Collection system of your choice using the included dust port attachment. And, because it’s a WEN product, your WEN variable speed detailing file sander includes three abrasive sanding belts (80, 120, and 320 grit), a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute
• Auto-tracking belt system requires no tensioning or adjustments.Range of Motion:50°
• Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project
• Tool-free belt installation makes for quick and easy belt changes during the job
• Includes three abrasive sanding belts, a dust port attachment and a two-year warranty

User questions & answers

Question:	where can I get more belts
Answer:	Pretty sure you can find replacement belts on Amazon. I have seen them there. I cannot recall the size of the belt offhand (1/2 x 18?) but that is what you would want to search for. The ones I saw were made by another manufacturer.
Question:	Would this help get tough to sand parts of my hardwood floors
Answer:	I was a professional carpenter, served a 4 year apprenticeship, have worked on residential, commercial and industrial projects, including hardwood floor refinishing. I retired from the trade in 1989 (it sure doesn't seem that long ago!). In short, this is a great sander, but it will not work for what you want. Go to a rental store and rent the appropriate equipment. Above all, have a top notch vacuum at your disposal.
Question:	Can the filer handle sanding a small plastic while a very small amount of continuous stream of water is pouring over the sample, for cooling
Answer:	Don't believe the unit is made for water cooling.. Water may be thrown into the motor. You might be better off looking for a different cooling agent. Air for example?
Question:	Any metal workers find the 2amp motor adequate for taking down the occasional weld or brush finishing stainless tube (using good belts of course
Answer:	Yeah, it’ll take a steady diet of weld grinding. I’ve been using 80 grit. Just let the tool do the work without much down pressure. Very good tool..

Product description

Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN. Sound Output: 50-60 dB.

• Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
• Dimensions – 17” L x 20.5” W x 10” H | Electrical Requirements – 120V, 60 Hz, 1A | Air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft. | Noise rating – 50 to 60 dB
• Programmable timer automatically shuts unit off after set number of minutes
• Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
• RF remote system allows for operation from any angle of the room, even if direct line of vision is obstructed

User questions & answers

Question:	Do the filters come with the unit or do you need to buy them separately
Answer:	The unit comes with filters. Replacement you have to buy separately.
Question:	What size room does this cover
Answer:	i think it would work fine for a 2 car garage it states it can filter 400 cubic feet per minute on high i use it with another ambient air cleaner to filter the air in my sharpening business shop which about 600 s.f.
Question:	How does a person know when it is time to change the filter
Answer:	I take a black sharpie and put black lines on the new filter when I can no longer see the lines I know its time to replace.
Question:	I understand you get what you pay for but other than price i see no difference to the jet 708620b. anyone regret buying this unit over the jet
Answer:	Sorry for the extremely late reply, but I thought others might still be comparing the WEN and JET models of air cleaners. The WEN 3417 or 3415T are the units which should be compared directly to the JET 708620b. Those units have virtually identical CFM and hardware specs to the JET. The WEN 3410 you referenced in this question is made for a much smaller space and pumps a lot less air, so it's not really a valid comparison. Compare equivalent models that have similar CFM ratings in order to get a fair idea of how the two brands truly compare. In that scenario, the WEN is a very good alternative to the JET, particularly given the shipping damage many owners have reported when purchasing the JET unit. The units are likely pretty equal, but using poor packaging which provides inadequate shipping protection can turn any 5-star product into a 1-star doorstop. I always check the percentages of 5-star and 1-star reviews to get an idea of the ratio of customers having problems versus perfectly happy customers. You might have a different method.

Product features

WEN 3410 3-Speed Remote-Controlled Air Filtration System

Remember when your workshop was full of clean air? Air-borne wood particulates can dirty up workspaces and seriously harm a respiratory system. The WEN 3-Speed Remote-Controlled Air Filtration System eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The quiet system is controllable from up to 26 feet away via the included remote. The lightweight design weighs in at a mere 31 pounds with hooks for easy installation to any ceiling. Easily switch between three speeds of 300, 350 and 400 CFM depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Just set the timer. The machine will turn off on its own once the time runs out, allowing you to give your workshop a thorough cleanse at the end of a day of woodworking without having to be present.

Fights Airborne Particles

Our 5-micron outer filter removes larger dust particles, while the 1-micron inner filter catches the rest, eliminating 99% of airborne particulates.

Handle and Mounting Hooks

With the lightweight design, move the system freely with the onboard carrying handle or fasten to the ceiling with the included mounting hooks.

Time Delay Feature

The programmable timer lets you leave the system running for an allocated amount of time, turning off automatically once the cycle is complete.

Control from up to 26 Feet Away

Choose between three speeds of 300, 350, and 400 CFM or set the time delay feature using the handy and easy-to-use remote control.

Product description

Remember when you had versatility and power all in the palm of your Hand? Do you fancy chamfers and v-grooves or are you partial towards rabbets and dados? We won't judge. That’ll just be between you and your router. Make intricate patterns in both the exterior and interior of your workpieces with the WEN 15-Amp variable speed plunge router. This versatile machine features a variable speed 15-Amp motor, providing users speeds from 8, 000 to 23, 000 rotations per minute. The 1/2-inch collet includes an additional 1/4-inch adapter, allowing for compatibility with a wide variety of bits. Our soft startup design prevents damage to your workpiece and lengthens the tool’s lifespan. The spring-loaded base features a lock-down knob to turn your plunge router into a fixed router. The intricate depth stop system features a 7-stop turret, a depth adjustment dial that advances the depth stop 5/16 of an inch per quarter turn, and a fine-tune adjustment dial that advances it 1/128 of an inch per quarter turn. The included guide fence lets users rout perfectly straight lines, helping to create dadoes and grooves along the workpiece. This kit comes packed with accessories, including a hard-shelled blow mold carrying case, a 1-1/2 inch dust Collection duct, a bit-changing wrench, a Straight-Edge guide fence, a fence scale, a centering pin for cutting circles, a profile guide for routing edges of curvy workpieces, and a template guide for creating more complex shapes. And, because its a WEN product, your woodworking router comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you stepped your carpentry up a notch? Remember WEN.

• Powerful 15-amp variable speed soft start motor provides speeds from 8, 000 to 23, 000 RPM
• Plunging base locks in downward position for functionality as both a plunge and a fixed Router
• Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches
• 7-Stop turret combined with both macro and micro-adjustment dials maximize precision
• Includes a hard-shelled carrying case, a multi-function Straight-edge fence, a template guide, a circle-cutting centering pin, a fence scale, a 1-1/2-inch dust collection duct, and a two-year warranty

User questions & answers

Question:	What is the length of the straight edge guide
Answer:	The length of the straight edge guide is 10 1/2". The two edge guide rods measure 15" long.
Question:	Is it 110 r 220 voltage
Answer:	110
Question:	Can I use it with routing table? Could you recommend one if so
Answer:	I wouldn't recommend using it with a table because it is a plunger router.
Question:	What is the horsepower rating
Answer:	2.5

Product features

7-Stop Turret

Increase or decrease your cutting depth by 1/8 inch increments with the 7-stop rotating turret.

Micro Adjustment

Our fine-tune adjustment dial advances the depth stop 1/128 of an inch per quarter turn.

Variable Speed

Our powerful 15-amp motor provides anywhere from 8,000 to 23,000 rotations per minute.

Two Routers in One

Our spring-loaded base features a lock-down knob to turn your plunge router into a fixed router.

Parallel Guide Fence

Pop on the included parallel guide fence for routing perfectly straight designs.

Versatile Bits

Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches.

Product description

Remember when you needed to smooth out those joists? Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 Inch Electric Hand Planer. Perfect for fixing stubborn doors and fitting wood. This power planer’s 6-Amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, you’ll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a v-shaped groove for easily flattening sharp post corners. Aside from the power planer, this package also includes a dust bag, a rabbeting guide, a kickstand and a parallel fence bracket. The included rabbeting guide adjusts anywhere from 0 to 7/10 inches to allow for rabbets up to an inch deep in size. The parallel fence provides an accurate and straight cut by making sure your strokes are directly parallel to the edge of the wood (a must have for planing door edges, wood trim and boards). The kickstand protects both the blade and the workpiece in between uses by keeping the blade elevated and out of contact from the surface of your project. Finally, the dust bag collects all of your loose shavings to keep your work space clean and sawdust free. The bag attaches to both the left or right hand side of the planer to fit whatever your preference may be. And because this is a WEN Product, your 6 Amp 3-1/4 Inch Electric Hand Planer comes backed by a 2-year warranty, a friendly customer help line, and a nationwide network of skilled service technicians. Remember when you had a reliable planer that lasted for years? Remember WEN.

• 6-amp motor provides up to 34,000 cuts per minute
• 16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
• Make rabbets up to 7/10 inch in size with the included rabbeting guide
• Lightweight design weighs in at a mere 6 pounds. Motor:120 V, 60 Hz
• Includes power planer, dust bag, a kickstand, a parallel fence bracket and a 2-year warranty

User questions & answers

Question:	Will it plain rough flooring board. 400 sqf
Answer:	No - the table is cast steel and I cannot think of any way that it can be successfully extended. The jointer works well as it is.
Question:	Where can i get blades to fit the 6530 planer
Answer:	Maybe if you're not married.
Question:	Does this give a shave as smooth as a hand held planer? Trying to level off 5 different 2x6's together. Want to make sure this will do the trick
Answer:	Why is the Amazon price over $150 more than Lowes is selling for? Delta 6" jointer
Question:	I am beginning in wood working and I am curious, If I buy this one will I still need to buy other planers or will this one cover most of what I need
Answer:	I had the same problem. That darn handle is too long. I ended up cutting it down so it could turn without hitting the fence.

Product features

6 Amps of Dependable Planing Power

Remember when you needed to smooth out those joists? When you had to make those uneven boards flush? Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 inches Electric Hand Planer. Perfect for fixing stubborn doors or fitting wood. This power planer’s 6-amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, you’ll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a v-shaped groove for chamfering to easily flatten sharp board corners. Remember when you had a reliable planer that lasted for years? Remember WEN.

Variety of Cutting Depths

16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 of an inch.

Kickstand for Added Protection

Kickstand prevents any unintentional blade-to-workpiece contact during times of rest.

Reversible Dust Chute

With the simple flick of the switch, change the directional aim of the sawdust from left to right. Dust bag attaches to either side of the planer.

34,000 Cuts Per Minute

The blade drum with two double-sided blades rotate at 17,000 RPM to ensure a clean and smooth cut. Blades are reversible and easy-to-replace.

Product description

Remember when you had a reliable stapler? Fasten thin materials tightly and securely with the WEN 20-Gauge Pneumatic Stapler. Shoot 3/8-inch crown staples (T50) ranging from 1/4 to 9/16 inches in length. Simply attach the compressor of your choice to the 1/4-inch NPT air inlet, and get to stapling. With a rubber-gripped handle and a lightweight aluminum body, you’ll have maximum comfort during long days on the job site. The spacious magazine holds up to 100 nails while the magazine’s side window helps you know when your staple supply is running low. The 360-degree adjustable exhaust rotates any direction to direct the air output away from the user. The WEN Stapler operates at 70 to 100 PSI, using 0.28 SCFM of air at 90 PSI. The compact design is perfect for stapling wood and upholstery in even the tightest corners. And because it’s a WEN product, your stapler comes backed by a two-year warranty and a friendly customer phone line. Remember when you could finish the job without a jam? Remember WEN.

• Perfect for upholstery, woodworking, trim work, vinyl installation and more
• Shoot 3/8-inch crown staples ranging from 1/4 to 9/16 inches in length
• Features an adjustable 360-degree air exhaust and a 1/4 inch NPT air inlet fitting
• Compact 1.8-pound design features an extended nose for tight areas and corners
• Spacious magazine holds up to 100 fasteners at a time

User questions & answers

Question:	Will this tool accept 18 gauge staples without harm? I bought this because it said T50 staples, but they seen to be 18 gauge
Answer:	I got KeLDE 5000 piece staple kit from Amazon. They worked, but came loose in the bag, which seemed strange. I hope this helps.
Question:	depth adjustment how to
Answer:	Not sure what you mean
Question:	What brand of staples would this gun need
Answer:	Yes. There’s socket for slow and fast.
Question:	Are there any reviews for the wen 61705 20-gauge t50 product which is actually listed on the page
Answer:	No, it doesn't have any cartridges inside. It doesn't have filter also

Product description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

User questions & answers

Question:	Are there finer grits avaialable than the 80 that comes with it
Answer:	You can get belts all the way up to 4000 grit with no problem.
Question:	Which is best all around novice machine, the 6502T or 6500 (both Wen
Answer:	I have the 6502t works like the boss , great product
Question:	Does the unit come assembled
Answer:	Yes, it comes mostly assembled. You have to put on the table for the disk and possibly the disk and belt.
Question:	Could this be used to smooth cut glass bottles
Answer:	You could use any sander as long as you use glass grinding belts

Product features

WEN 4 x 36-Inch Belt Disc Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch sanding disc, you'll have the capacity to sand whatever work piece your heart desires.

Heavy-Duty Cast Iron Base

The sturdy cast iron base prevents wobbling and walking, ensuring the sander stays in one place while you're sanding.

Adjustable Belt

Tilt the belt from a horizontal to a vertical position or anywhere in between depending on the needs of your project.

Dust Collection Port

Attach your favorite dust collector to the 2.5-inch dust port to minimize clean-up of saw dust and debris in your workshop.

Table with Miter Gauge

The sanding disc is accompanied by a support table equipped with 0 to 45° beveling capabilities and a removable miter gauge.

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

Remember when you had smooth and clean detailing on your woodworking pieces? The WEN Electric Detailing Palm Sander puts reliable sanding right into the palm of your hand. This detail sander allows for the preciseness of sanding by hand with the added efficiency of 13,500 OPM worth of vibrational power. The one-amp motor sands away at abrasive surfaces while the vacuum adapter allows for easy attachment to dust collection devices. Plus, the two-pound lightweight design ensures that your hands never get too tired. The WEN Electric Detailing Palm Sander also comes backed by a one year warranty, a nationwide network of skilled service technicians, a helpful customer service phone line, and includes one sheet of sand paper. Remember when you had the power to sand detailed woodwork all in the palm of your hand? Remember WEN.

From the Manufacturer

Palm detail sander. 120V AC, 0.8A. No load speed: 12,000 orbits per minute. Sandpaper size: 5-1/2"x5-1/2"x3-1/8".

• Features a 3.75 x 5.5 inch pad with an angled tip for precision work
• Powerful one-amp motor provides 13,500 OPM
• Lightweight design weighs in at a mere two pounds
• Dust collection port helps minimize loose sawdust
• Velcro base pad allows for simple sandpaper removal and installation

User questions & answers

Question:	Can you use a sander instead of a stainless steel who'll scrub to remove gray areas on teak wood easier and faster without damaging it
Answer:	I've never been able to get dark stains out of wood with a sander or steel wool. I had better luck treating the stain with clorox or, if the stain is caused by organic material, I use hydrogen peroxide, let the spot dry and then sand. The clorox bleaches the wood, and the hydrogen peroxide reacts with organics to lift the stain. But if the hydrogen peroxide doesn't fizz on the stain, it is not working. If the stain is fairly light, the sander will take it out quicker than steel wool. A lot depends on how deep into the wood the stain is.
Question:	Does this use the same sandpaper sheets at the Black and Decker mouse sander? or is it a different size format
Answer:	No the sandpapers for black and decker will be a tad smaller than the ones for this sander. you can try the generic sandpapers sold here on amazon, or wen also sells their replacement sandpapers. i bought mine from the fugen brand here, it's way cheaper with the exact same hole position and last just as long as the wen brand.
Question:	How difficult is it to find replacement sandpaper for this instrument
Answer:	I bought replacement sandpapers for my wen sander from the brand fugen here on amazon and they fit perfectly. they even have the holes line up so the vacuum works
Question:	How can you use regular sandpaper with this? It doesn't have the holes and how does it stay
Answer:	There is clip on each side. You place the paper under the clip, then close the clip. The paper will stay attached to the sander.

Product features

Power in the Palm of Your Hand

Remember when you had a smooth and clean finish on every detail of your workpiece? The WEN Electric Detailing Palm Sander puts reliable sanding right into the palm of your hand. This detail sander allows for the precision of sanding by hand with the added efficiency of 13,500 OPM worth of vibrational power. The one-amp motor sands away at abrasive surfaces while the vacuum adapter allows for easy attachment to dust collection devices. Plus, the two-pound lightweight design ensures that your hands never get too tired. And, because it is a WEN product, your sander comes backed by a one-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you had the power to sand detailed woodwork all in the palm of your hand? Remember WEN.

Precision Sanding

The 3.75 x 5.5 inch sanding pad features fan-assisted dust collection holes and an angled tip for tight corners and precision work.

Ergonomic Grip

The specially designed grip contours perfectly to fit in the palm of your hand while the ribbed rubber backing prevents slippage.

Hook-and-Loop Base Pad

The hook-and-loop base pad allows for simple sandpaper removal and installation, making for quick changes between grits.

Dust Collection Port

The center-mounted dust collection port minimizes clean up and controls the flow of sawdust during operation.

Product description

Remember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
• Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
• The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

User questions & answers

Question:	How easy to go from belt to spindle or vice versa? How long does it take
Answer:	About a minute, take the nut off the top and the belt assembly will come off. Then you can install the plate and drum onto the spindle. Note: the drum and belt opinions use two different nuts, they both come with the machine, the down side is that you have to keep up with the one your not using. To my knowledge the rigid brand is the same way.
Question:	mine is Missing the 1" spindle, is there somewhere to get that
Answer:	the little one is the sanding roll only
Question:	Work Table spec
Answer:	Any bench you desire. It is very stable and does not move around. Good buy, use it for all sorts of sanding projects in the shop.
Question:	Can anyone please tell me In what direction does the belt spin? To the left (counter clockwise) or to the right (clockwise
Answer:	In the photo, there is a stop bar on the right side which indicates the belt moves from left to right, counter-clockwise, pushing a work piece int the stop bar. But I don't own one of these.

Product features

WEN 6524 Oscillating Belt and Spindle Sander

Oscillating up to 58 times per minute, the WEN 6524 Oscillating Belt and Spindle Sander includes a beveling work table, four rubber sanding drums, one belt sanding attachment, six pieces of 80-grit sandpaper and five throat plates to give you the best result every time. Woodworking will get a lot easier with the WEN 6524 Oscillating Belt and Spindle Sander.

Arcs, Curves and Contours

You will be able to make faces, arcs, curves, contours and more with the WEN 6524 Oscillating Belt and Spindle Sander. This tool allows you to fix a dust collection system to avoid the mess and help you clean up faster. Even after several projects and application, this sander will certainly go strong as it is built to be durable and efficient.

Product description

Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.

• 2.5 amp motor rotates the blade up to 2500 feet per minute
• Create cuts up to 3-1/2 inches deep and 9 inches wide
• Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
• Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
• Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty

User questions & answers

Question:	What are the table dimensions
Answer:	The table is 12" by 12".
Question:	Can this cut schedule 40 stainless steel 304L pipes
Answer:	I wouldn't, the cuts wouldn't be that great and you would burn out the motor on the saw
Question:	will saw make sharp turns
Answer:	If you install a smaller blade it will turn almost as sharply as a scroll saw. I have a 1/4" blade and it can turn perhaps a 3/4" radius OK.
Question:	Do i need to purchase saw blades
Answer:	The saw ships with one wood blade. I purchased an extra finer tooth blade and a metal cutting blade. good to have an extra in case the one you are using breaks.

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with the WEN 16-Inch Variable Speed Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16. 25-by-10-inch table bevels up to 45 degrees for angled cuts. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. There’s no need to fret about blade changes - the included blade holder accepts pinned, pinless, and spiral blades while the unique side panel swings open for easy access to the bottom blade holder. This package includes one 15 TPI pinned blade, one 18 TPI pinned blade, and one 18 TPI pinless blade. And because its a WEN product, your scroll saw comes backed by a two-year , a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Unique side panel flips open for easy-access blade changes
• Variable speed goes from 550 to 1600 strokes per minute
• Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades

User questions & answers

Question:	How well would this do with cutting corrugated plastic a.k.a coroplast
Answer:	Honestly probably pretty well. I use mine to cut everything from 1/8 inch plexiglass, to 2x4’s with out a problem. Not a bad little machine honestly. When cutting something such a 2x4 blades wear out pretty quick but with the thin stuff they last awhile.
Question:	What is the actual size of the saw
Answer:	26-3/8" x 13" x 14-3/4"
Question:	Have a new 3922 scroll saw. Upper and lower pinless blade holders wont pinch together to hold the blades. Wen are you going to back up your saw
Answer:	You have to make sure they are the correct length and it does take some work getting them in properly. It too two people to load mine.
Question:	what is the difference between the 3921 and
Answer:	These two units are almost identical. The only differences are that the 3921 includes a flexible work light and a blade storage compartment on the side, while 3922 features a special side panel that folds open for easy clean up and blade changes. Also, the 3921 uses the two-direction adapter system for holding blades (better for pinned blades), while the 3922 uses a standard blade holding system (better for pinless blades).

Product features

Accurate and Sharp

This precision scroll saw by WEN can seamlessly cut through materials, displaying top performance. With utmost accuracy, you will be able to experience the sharpest and fastest blades with the WEN 3922 16-inch Variable Speed Scroll Saw

Ideal for Detailed Cuts

If you want to cut materials like hard wood, the WEN 3922 16-inch Variable Speed Scroll Saw is ideal for DIY applications. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. A unique side panel flips open for easy-access blade changes with this scroll saw.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our powerful 10-amp motor combined with the two-blade 6-1/8 inch cutterhead provides up to 20,000 cuts per minute, making easy work out of even the hardest of woods. Adjust the infeed table to take cuts anywhere from 0 to 1/8 inches deep. The onboard scale makes for easy adjustments to the depth of cut for maximum accuracy before each pass. The spacious table measures in at 6-1/4 x 28-1/2 inches for large or uniquely-shaped workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, exposing the cutterhead only during jointing operation. This package also features an onboard dust port, a push stick, a push block, and a filter bag for minimal cleanup. And, because its a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch cutterhead
• 10-amp motor provides up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch in size
• Onboard depth scale makes for easy adjustments to the depth of cut
• Adjustable 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, a dust filter bag, and a two-year warranty

User questions & answers

Question:	Two questions, [1. Is it easy to change blades? [2. Can the blades be purchased via Amazon
Answer:	These are 1/2 inch shank
Question:	Does it come in 230 v version
Answer:	Yes, it comes with a micro usb to ac adapter and charger, thank you!
Question:	Can it be used to plane wood as well as joint
Answer:	If you have WiFi!
Question:	Description says "Onboard depth scale" but I cant't see it in any of the images. I can see the knob to adjust the depth but where is the scale
Answer:	It comes with the charger.