12 best husky air impact wrench

Product description

This Ingersoll Rand air impact wrench was introduced over 25 years ago and has been continuously refined. Offers the sheer power and performance features to tackle the toughest jobs with ease - as well as proven durability and economy. CFM at Load: 22, Drive (in.): 1/2, Forward Torque (ft.-lbs.): 350, Working Torque (ft.-lb.): 25-350, Impacts Per Minute (IPM): 1,200, Max. Reverse Torque (ft.-lbs.): 600, Max. Torque (ft.-lbs.): 600, Hammer Mechanism: Twin, Reversible: Yes, Inlet Size (in.): 1/4, Standard Bolt Capacity (in.): 9/16, Speed - No Load (RPM): 8,000, Tool Weight (lbs.): 5.8, Average Air Consumption (CFM): 4.2, Noise Level (dB): 99, Min. Hose Size (in.): 3/8, Tool Length (in.): 7 5/16, Variable Speed: Yes

• Classic, reliable design offers proven power, performance, and durability
• Twin-hammer mechanism delivers a maximum torque of 600 foot-pounds
• Adjustable power regulator provides easy control of torque output
• Ergonomic 2-piece design is easy to operate and maintain
• Arrives fully lubricated and ready for use out of the box
• Exclusive impact mechanism
• Pressure-feed lubrication

User questions & answers

Question:	Wher do you oil this tool? I do not see a place to do this
Answer:	Impacts need lubrication in two spots. The inlet and the hammer mechanism. Ready your owners manual for the procedure. Some have and oil plug and some are taken down and greased by hand.
Question:	Where is this unit manufactured
Answer:	Ingersoll Rand is an American company out of Wisconsin
Question:	What impact extension set and impact socket set do you have, and would you recommend it
Answer:	I got the 1/2" Tekton sockets and extensions and they've worked very well for me. Just be sure to check out the sizing of the sockets. One of the metric sets has bigger sockets but not sequentially getting larger (they skip some sizes). I got the 11mm-23mm I think. Has all the sockets in there. Recommend the gun? Absolutely.
Question:	Trigger gets stuck on mine. I release trigger and it keeps going. Gun is only a yr old. Any ideas
Answer:	Sounds like the spring is hanging up inside. Not sure if you registered with IR or not but I would think that's covered. Haven't had that problem with any other Ingersoll impacts though.

Product features

Ingersoll Rand 231C Super-Duty Air Impact Wrench, 1/2 Inch

Power through tough jobs with ease using the Ingersoll Rand 231C 1/2-Inch Super-Duty Air Impact Wrench. First introduced over 25 years ago and refined ever since, this impact wrench offers proven performance and reliability at an excellent value. The exclusive twin-hammer impact mechanism delivers a maximum torque of 600 foot-pounds, while the adjustable power regulator lets you easily adjust power output to suit your task. Lightweight and easy to maintain, this impact wrench is a reliable choice for vehicle hobbyists and professional mechanics alike.

What's in the Box:

Twin-Hammer Mechanism for Efficient Performance

Delivering a maximum torque of 600 foot-pounds, the 231C Air Impact Wrench offers enough power to install and remove stubborn bolts, lug nuts, and other hardy fasteners. The twin-hammer mechanism helps ensure efficient performance with impressive rotational speeds of up to 8,000 rpm.

Ergonomic Design for Sustained Work

Measuring 7.3 inches in length and weighing 5.8 pounds, the 231C Air Impact Wrench is compact enough to minimize stress on your wrists and hands. And thanks to its contoured handle and ergonomic design, the impact wrench is easy to carry and control.

Convenient and Easy to Maintain

The 231C Air Impact Wrench features a streamlined two-piece construction that is easy to maintain. For added convenience, this impact wrench arrives fully lubricated, so it’s ready to use right out of the box.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

800 ft-lb maximum torquehard hitting twin hammerlow-weight composite housingbuilt-in silencing reduces noise level7,000 rpm free speed

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

Product description

The AIRCAT 1600-TH-A is an upgrade to the 1600-TH. We increased the maximum torque from 1200 ft-lbs to 1400 ft-lbs and increased the loosening torque from 1400 ft-lbs to 1600 ft-lbs. The 1600-TH-A has the patented ergonomic AIRCAT composite housing and grip for user comfort and reduces weight. The twin hammer mechanism and anvil are made from triple heat treated Ni-Cr-Mo alloy steel for durability and strength. It has the patented AIRCAT silencing technology that reduces noise to 86 dBa which is the quietest in this class of impacts. The F/R is combined with the power management switch accessibility. The specs on the 1600-TH-a are as follows : 4500 RPM, Bolt capacity is 7/8", 1100 impacts per minute, weighs 8.25 lbs, uses 10 cfm and weighs 8.15 lbs. Like all air tools the 1600-TH-A is designed to run at 90 psi at the tool inlet while the trigger is engaged. It carries the standard AIRCAT 2 Year Warranty.

• 1600 ft-lbs of loosening torque
• 2 Year warranty
• Patented ergonomic composite grip
• Patented silencing technology
• Triple heat treated Ni-Cr-Mo alloy steel hammers and anvil

User questions & answers

Question:	Does the anvil have a hole in it for a retaining pin
Answer:	I never do. But admittedly, I'm not familiar with the Q wax. Still, I suspect that if you were to use both, you should probably start with the wax, and finish with this.
Question:	Will it take off a tractor trailer tire
Answer:	I’ve been using it on my wood cues with no issues and it does a great job.
Question:	What size is the inlet for the air
Answer:	Hello. This product is intended for smoothing the cue shaft after it has been cleaned. We would recommend using an actual cleaning product first, such as Sil-Kleen, Porper Cleaner, or even an abrasive cleaner pad. Then use this to smooth the shaft after it has been cleaned. Thank you for your interest! Y2PLAY Stores - 800-695-4808.

Product features

AIRCAT 1600-TH-A 3/4" "Super Duty" Impact Wrench

• Provides 1,600 ft-lb loosening torque
• Hard hitting "Super Clutch" twin hammer mechanism
• Best suited for bus/large automotive use, large agricultural service vehicles, large bolt assembly
• Patented ergonomically designed handle
• Patented quiet tuned exhaust (86 Decibels)
• Patented easy operation flip lever forward and reverse

AIRCAT PNEUMATIC TOOLS

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT features fine-tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. More power. Half the noise. AIRCAT is committed to product innovation, high quality levels, high service levels and continued development and expansion of the AIRCAT, NITROCAT and VIBROTHERM DRIVE brands. VIBROTHERM DRIVE are a new assortment of impact wrenches up to 3/4" drive that provide longer working life, lower vibration and shorter length-coupled with "state of the art" cosmetic styling.

Product description

The Chicago Pneumatic CP7748 1/2-Inch high torque impact was introduced less than 3 years ago but has immediately gained a huge following with professional mechanics. This tool is the strongest 1/2 inch impact on the market with over 1200 foot pounds of nut loosening power while weighing only 4.4 lbs. The composite housing with aluminum back cap along with a thermo-plastic rubber injected grip makes the tool super durable and comfortable. The air motor design holds up in dirty conditions better than all other composite competitors. Quiet handle exhaust, Twin hammer mechanism, full teasing ergonomically developed trigger, swivel air inlet, free speed 8,200, working torque: 75-580, max torque: 922 ft lbs, super great value and sure to please even the most demanding operator.

• Does not slip when it is in operator’s hand even if it is dirty or oily
• Contoured comfort grip handle instead of TPR injected in the handle
• Smooth forward and reverse switch on the back of the tool
• 3 Positions in forward Low (180 ft.lbs) Medium (480 ft.lbs) and High (730 ft.lbs)
• 960-Foot lbs. / 1,300 Nm of max torque in reverse position

User questions & answers

Question:	Where can i get parts
Answer:	they have a web site for parts
Question:	Does the rubber handle come loose in gas or oil
Answer:	No, rubber good, only one think which annoying air leaking from o-ring at fitting... Otherwise highly recommend for price!!! Working as heavy equipment technician and hardly use every day without other issue.
Question:	in what country is it made
Answer:	Taiwan
Question:	how many cfm is required to run this wrench
Answer:	Most impacts require a tank size of 20 gallons or more. The CFM is misleading because a tool like this can consume 50-CFM under load and be rated for 10% of its actual consumption. I'm interested in this gun to replace an IR231, like one guy said, you can run it on a pancake compressor if you allow the air to recover.

Product features

Chicago Pneumatic CP7748 1/2" Composite Impact Wrench

Most powerful tool on the market in its class: 922 ft.lbs – 1250 Nm of maximum real torque in reverse. Price to performance/durability ratio.

Lightweight due to composite housing. Contoured comfort grip handle instead of TPR injected in handle. Smooth Forward / Reverse Switch on back.

Product description

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT has the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.

• AirCAT 1057-TH 1/2" Compact Impact wrench 500 ft-lbs

User questions & answers

Question:	The specs for this 1057-th are simlar to the 1055-th. other than physical size and price, what's the difference? why choose one over the other
Answer:	This impact does not have a pin for the socket.
Question:	I wish i could understood how this is different than the aircat 1056-xl. they look about the same
Answer:	Yes it will take anything off this gun it’s a monster well worth the money
Question:	I wish i could understood how this is different than the aircat 1056-xl. they look about the same
Answer:	The air inlet is 3/8" NPT.
Question:	What the difference between 1057 th and the 1056. ? xl which one has more power
Answer:	Not really made for graphite . It conditions wood shafts . I mean it might be slick for a game but you will wear it off really quick . It’s made to soak into wood and stay for awhile . You will go through it too fast with graphite . Probably won’t work properly.

Product features

AIRCAT 1057-TH 1/2” Compact Impact Wrench

• Very compact, only 3.85” wide!
• Low weight aluminum alloy housing
• Reliable Jumbo hammer mechanism delivers maximum power, while increasing reliability
• Patented "Silencing Technology" reduces the noise level to 89 dBA
• Trigger mounted combined reverse and power management switch provides ultimate control and one-hand operation

AIRCAT PNEUMATIC TOOLS

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT features fine-tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. More power. Half the noise. AIRCAT is committed to product innovation, high quality levels, high service levels and continued development and expansion of the AIRCAT, NITROCAT and VIBROTHERM DRIVE brands. VIBROTHERM DRIVE are a new assortment of impact wrenches up to 3/4" drive that provide longer working life, lower vibration and shorter length-coupled with "state of the art" cosmetic styling.

Product description

This 800 ft./lbs. 1/2 in. High-Low Impact Wrench is built for the professional user, providing more power with less noise. The tool features a rubber overmold grip and a low weight composite housing for added user comfort. Each tool produces 800 ft./lbs. of torque. Perfect for auto/recreational vehicle/garden equipment service and repair.

• Unique high/low torque switch for instant change of power in both forward and reverse
• 800 ft./lbs. in the high torque setting and 150 ft./lbs. of torque in low torque setting
• Thumb operated forward and reverse switch provide 1 handed directional changes
• Molded-in buffers protect the tool from side impact
• New ergonomically designed grip and trigger provide ultimate operator comfort and control

Product description

The AirCat line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AirCat also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AirCat has the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.

• Provides 550 ft-lb maximum torque and 750 ft-lb of loosening torque
• Low weight composite housing reduces weight to 2.5 Lbs
• Reliable jumbo hammer mechanism delivers maximum power, while increasing reliability
• Patented "Silencing Technology" reduces the noise level to (85 dBA)
• Patented grip has been ergonomically designed to perfectly fit the hand, providing unmatched comfort for the user

User questions & answers

Question:	Any cons and will this work well towards a tire shop
Answer:	Height 5-5/8" Width 17-3/8" Depth 14-9/10"
Question:	Where is this tool manufactured
Answer:	The Bluetooth works across the 40 feet from the receiver to my kitchen but if I go around the corner it cuts out. So at least 40 feet direct shot.
Question:	What is the max psi
Answer:	I don't use the remote either. I've had mine for a few months now, use it with both iphone and ipad and it works just as i'd hoped it would. Very happy.
Question:	What's the difference between this and the 1055? What's the difference in the nitrocat line anyway? I was told twin clutch vs twin hammer
Answer:	Hello, Thanks for your question. We know you are concerning about the voice leak. But we believe that all the open-ear design headphones will encounter this problem. Ring also has this issue but definetly not serious. Usually if you don't turn up the volume to 70%+ in public, others are difficult to hear what you are listening to. And in another way, you can use it as a mini speaker which surrounds you in 360 degree. Use a reasonable volume on the right occasion and you will find it cool.
Question:	can I use it on a Mac
Answer:	Hi, thanks for your question, Mu6 Ring has adopts an adjustable size, the 120 degree rotation axis can securely fits your head and won’t shift or fall out during long hours of training
Question:	What is the battery life
Answer:	Hi, thanks for your question. This question we can compare it with traditional boneconduction headphones. Indeed Ring will work better than bone conduction headphones if no hearing loss. Cuz it will not be affected by bone vibration But for those who has hearing loss, bone condcution headphones will help them hear a lot.
Question:	What size batteries does it take
Answer:	Hello, thanks for your question. Ring adopts 120 degree rotation axis design. Securely fits your head and won’t shift or fall out during long hours of use. You can hear the music clearly even you are riding or running into the wind.
Question:	I went to hp website to download driver but mac wasn't an option, only windows and android? anyone have any advice on finding a driver
Answer:	My Bluetooth dongle connects my pc to my entertainment center as well as my Bluetooth wireless headphones. The quality of sound is excellent. It connects quickly reading the Bluetooth devices without hassle. I guarantee it work with your devices also

Product features

AIRCAT 1056-XL 1/2" Composite Compact Impact Wrench

• Provides 550 ft-lb maximum torque
• Low weight composite housing reduces weight to 2.5 lbs.
• Reliable jumbo hammer mechanism delivers maximum power, while increasing reliability
• Patented "Silencing Technology" reduces the noise level to 85 dBA
• Patented grip has been ergonomically designed to perfectly fit the hand, providing unmatched comfort for the user
• Newly patented trigger mounted combined reverse and power management switch provides ultimate control and one-hand operation
• Provides ultimate reliability with the triple heat treated ”alloy steel hammer mechanism parts and anvil

AIRCAT PNEUMATIC TOOLS

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT features fine-tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. More power. Half the noise. AIRCAT is committed to product innovation, high quality levels, high service levels and continued development and expansion of the AIRCAT, NITROCAT and VIBROTHERM DRIVE brands. VIBROTHERM DRIVE are a new assortment of impact wrenches up to 3/4" drive that provide longer working life, lower vibration and shorter length-coupled with "state of the art" cosmetic styling.

Product description

Full of power with an easy to access design, The 216B straight impact wrench ensures every job is a job well done.

• Durable: Combining an aluminum hammer case with metal housing ensures this wrench is both durable and lightweight.
• Power: The ball and cam mechanism delivers a high output of power without ever risking your tool stalling out.
• Access: Thanks to its straight grip and and overall design, this impact wrench is great for use in hard-to-reach spaces.
• Great for Vehicle Repair: The square socket retaining ring makes this an ideal impact wrench when you need your sockets held securely.

User questions & answers

Question:	Does this impact have adjustable torque settings
Answer:	pretty much the same exept for the size, if getting into tight spaces is important you would get the shorter of the two, 3.7 inch as opposed to 4.2 inch , sometimes a 1/2 inch can make a big difference.
Question:	Can impact wrench drill holes in brick
Answer:	This one isnt as long as the 1056-XL this one is 3.85" where as the other is 4.25" long
Question:	Is this
Answer:	They are similar tools however this one has a cast aluminum housing compared to the 1056-XL that has a composite housing.
Question:	What is the average CFM for this
Answer:	The 1057 would have more ft-lbs. The main difference would be the Kevlar housing on model 1056 vs the compact style on 1057.

Product features

Ingersoll Rand 216B Straight Butterfly Compact Impact Wrench

Full of power with an easy to access design, the 216B Straight Butterfly Compact Impact Wrench ensures every job is a job well done, no matter where it is located.

Key Features:

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offers one of the best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The Campbell Hausfeld get stuff done 1/2 inch impact wrench will help you power through the toughest jobs. Whether you are a weekend Warrior or an auto enthusiast, you will appreciate the 400 ft. Lbs. Of working torque that the XT002000 delivers. This impact wrench boasts a heavy duty twin-hammer impact mechanism for maximum torque, while the 3-speed forward/reverse power settings adjusts to meet your specific project requirements. The composite housing reduces tool weight (5.6 lbs.) while maintaining durability; combined with the rubberized comfort grip the XT002000 features a user friendly design. With a maximum torque 750 ft. Lbs., BPM of 1,200 and RPM of 8,500, this impact wrench gets stuff done efficiently. Average air consumption of 3.4 CFM @ 90 PSI. Maximum pressure of 90 PSI. Minimum hose size of 3/8 inch. Air inlet size of ¼ inch NPT (F). an air compressor with a tank capacity of 8 gallons or larger is recommended. Get stuff done faster and easier with Campbell Hausfeld. The Air Power Expert®

• Pair this impact wrench with the right Campbell Hausfeld air compressor to create 750 FT/LBS of nut-busting torque so you can work on small cars or lawn mowers with ease
• 3-Speed power regulator makes it easy to select the speed you need to get the perfect tension on your lug nuts every time.
• The sturdy composite design creates a long-lasting durable tool so you can complete job after job with confidence.
• This impact wrenches light weight, smooth twin-hammer mechanism, and ergonomic soft grip design work together to reduce vibration and fatigue so you can work longer with less wear on your hands.
• Combine with a Campbell Hausfeld 30 Gallon Portable Compressor (VT6271) and air hose (PA117701AV) for best results
• Finish your projects faster and easier with Campbell Hausfeld. The Air Power Expert.

User questions & answers

Question:	Will it work with campbell hausfeld wl651400aj it says displacement is 9.9 cfm
Answer:	Yes, we adopt great smooth zippers.
Question:	Will this work with a 2.6scfm/90psi compressor? Need it for tire lugs
Answer:	Yes, we offer one-year warranty, if you have any problem with our products, please feel free to get to us.
Question:	Does it have adjustable torque setting
Answer:	You are right. .64 ounce seems light. I like the bag. I would buy it again. I have used travel kits for decades. This is surely one of my all time favorites.
Question:	Is this air powered or electric
Answer:	No

Product features

Campbell Hausfeld - The Air Power Expert

Campbell Hausfeld makes it easier for you to finish your projects like a pro. The company's history of creating quality products began in 1836, when it manufactured horse-drawn wagons and agricultural equipment. Today, the company offers a complete line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert.

Get Stuff Done Right with Campbell Hausfeld

Campbell Hausfeld GSD Series air tools live up to their name. These distinctive tools help you Get Stuff Done because we reduced their weight and made them more comfortable to operate, so you can use them in more places and work longer before needing a break. You’ll also get robust, adjustable power output and rugged durability — the things you need to Get Stuff Done.

Big Power & Comfort to Get Stuff Done - XT002000 1/2" Impact Wrench

Power through the toughest jobs with the GSD 1/2” impact wrench. Whether you are a weekend warrior with a hundred lag bolts to tighten or an auto enthusiast rotating your tires - you will appreciate the 400 ft. lbs. of working torque and 3-speed power setting that this tool delivers in a comfortable 5 pound package.

Big Power

The ½ inch impact wrench boasts a working torque of 400 ft. Lbs., BPM of 1, 200 and RPM of 8, 500, to get stuff done efficiently.

User Friendly Design

The XT002000 impact wrench features variable speed control while the lightweight design (5.2 lbs.) gives you the support you need in tight spaces to get the job done.

Balanced Twin-Hammer Mechanism

Balanced twin-hammer reduces vibration, making this wrench more comfortable to use while reducing fatigue. Rubberized, ergonomic comfort-grip with an easy-pull trigger makes this unit user friendly.

Total Control - 3 Speed Settings

The impact wrench's 3-speed forward/reverse power settings adjusts to meet your specific project requirements - get the results you need from project to project with the XT002000.

Product description

The product type is #CP722H - 3/4'' Drive - Pistol Grip - Air Powered Impact Wrench. This product is made in United States and it is manufactured by Chicago Pneumatic.

From the Manufacturer

The CP772H is the smoothest operating Heavy Duty 3/4 inch Air Impact Wrench on the market. Features one-hand push button forward/reverse regulator and a comfortable contoured handle grip. Handle exhaust with 360 degree air inlet swivel to prevent hose kinks. Great for spring work, truck and bus maintenance, farm machinery and construction equipment. Drive (in.): 3/4, Average Air Consumption (CFM): 6, CFM at Load: 24, Speed - No Load (RPM): 4,200, Blows Per Minute (BPM): 900, Max. Torque (ft.-lbs.): 1,000, Working Torque (ft.-lb.): 150-700, Inlet Size (in.): 3/8, Min. Hose Size (in.): 1/2, Hammer Mechanism: Dynapact clutch, Standard Bolt Capacity (in.): 1, Variable Speed: Yes, Noise Level (dB): 96, Tool Length (in.): 9 5/8, Tool Weight (lbs.): 10.5

• Metal / Plastic
• Imported
• DYNA-PACT oil bath clutch
• Single handed reverse button with 4 settings of power
• 360° Air inlet swivel
• Comfortable use thanks to low noise and vibration levels
• New comfortable contoured handle grip

User questions & answers

Question:	What sive is the air inlet
Answer:	Not sure we plumbed ours for a 3/4 inch feed hose plenty of air supply u will need a big compressor with plenty of air storage to run this gun

Product features

Chicago Pneumatic CP772H 3/4-in. Drive Super Duty Air Impact Wrench

The CP772H is a smooth-operating tool offering exceptional durability. It comes with a differential regulator that helps the operator match the necessary power to the job. A handle exhaust helps in directing air away from the operator and job area. You can expect top quality performance and exceptional durability with the enhanced oil bath Dyna-Pact clutch which helps in performing several heavy-duty applications.

Product description

Featuring the best power-to-weight ratio of any impact wrench on the market, the Ingersoll Rand 2235TiMAX 1/2-Inch Drive Air Impact Wrench is built to tackle the toughest bolts. This powerful, durable impact wrench packs up to 1,350 foot-pounds of nut-busting torque into a compact and lightweight design. Weighing only 4.6 pounds, it allows you to work for longer stretches of time without fatigue. The four-position power regulator and one-handed forward/reverse push button give you the control and versatility needed to tackle a variety of automotive and industrial jobs. And thanks to its titanium hammer case and rugged composite housing, this impact wrench is tough enough to endure the harshest working environments--from garages to demanding industrial jobsites.

• Plastic / Metal
• Imported
• 930 feet-pounds of maximum reverse torque
• Nut-busting torque of 1350 feet-pounds. Air Consumption @ Load (cfm) - 24. Air Consumption @ Load (L/min) - 680. Average Air Consumption (cfm) - 6
• Finely tuned twin-hammer impact mechanism
• Born from the legendary durability of the Ingersoll Rand 2135 Series.Driver type:Square, Hog-Ring
• Built with a titanium hammer case, steel-wear plate and composite housing that protect the tool from the harshest environments

User questions & answers

Question:	how much is the maximum pressure psi that supports
Answer:	Thank you for your inquiry! Our air tools are rated at 90 psi. We recommend 90 psi for best performance. 90 psi at the tool, while running.
Question:	where was it make
Answer:	As a machinist for IR, I can answer some of the questions. Some of the parts are made in China. However, most of the major parts like the anvil, hammer frame, and hammers are made in America. And the tool itself is assembled in America. I hope that you find this answer satisfactory.
Question:	what psi does it need for best performance
Answer:	Per mfg specs, 90psi. This should be checked at the end of your air line. (Where your impact is connected to hose). Not at your compressor or several feet from your end line. Your Psi will drop the further your line is. If you need more torque and your at 90psi then you should of bought a 3/4" impact. All vehicle service tools are rated and tested at 90psi.
Question:	where it made
Answer:	As a machinist for IR, I can answer some of the questions. Some of the parts are made in China. However, most of the major parts like the anvil, hammer frame, and hammers are made in America. And the tool itself is assembled in America. I hope that you find this answer satisfactory.

Product features

Ingersoll Rand 2235TiMAX Drive Air Impact Wrench, 1/2 Inch

Power through demanding automotive and jobsite tasks with the Ingersoll Rand 2235TiMAX 1/2-Inch Drive Air Impact Wrench. Designed to work with an air compressor, this powerful impact wrench delivers up to 1,350 foot-pounds of nut busting torque in a lightweight design that helps minimize fatigue. The four-position power regulator and one-handed forward/reverse button give you complete control, so you can easily fine-tune torque output and direction to suit the task at hand. With its rugged housing and titanium hammer case, this impact wrench is designed to withstand rigorous, harsh usage.

What's in the Box:

Powerful, Best-in-Class Torque Output

Delivering up to 1,350 foot-pounds of nut-busting torque, the 2235TiMAX Drive Air Impact Wrench capably tackles the most demanding assembly and disassembly jobs. The finely tuned twin-hammer impact mechanism punishes tough bolts and powers through heavy-duty applications such as suspension work and heavy equipment repair.

Four-Position Power Regulator Offers Superior Control

Using the four-position power regulator, you can seamlessly switch between power modes and adjust torque output to suit each individual task. The one-handed forward/reverse mechanism lets you change direction with a simple button push.

Compact and Lightweight

Weighing just 4.6 pounds, the 2235TiMAX Air Impact Wrench offers the best power-to-weight ratio in its class. The ergonomic handle makes operating the wrench easy, while the lightweight yet durable frame helps keep user fatigue to a minimum. You can work harder and faster for longer periods of time.

Rigorously Tested for Reliability

Every component, mechanism, and function has undergone rigorous testing to ensure long-lasting performance. The result is a finely tuned workhorse that endures the toughest applications.

Rugged Design Endures Tough Use

Whether you operate a garage or an industrial jobsite, you can rely on the 2235TiMAX Impact Wrench to perform reliably in harsh working conditions. With its titanium hammer case, steel wear plate, and durable composite housing, this tool can sustain heavy-duty usage.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

Tremendous power and longer life make this wrench the popular choice of professional mechanics for exhaust systems, air conditioning, radiator, body shop, and bench work. The powerful 3/8 inch pistol grip on the market, it offers all the advantages of the single hammer impact mechanism for removing and replacing bolts up to 7/16 inch without struggle.

From the Manufacturer

Tremendous power and longer life make this wrench the popular choice of professional mechanics for exhaust systems, air conditioning, radiator, body shop, and bench work. Still the most powerful 3/8" pistol-grip on the market, it offers all the advantages of the Single Hammer Impact Mechanism for removing and replacing bolts up to 7/16" without a struggle.

• Delivers best-in-class performance
• Easy-to-control
• New seven-vane motor delivers even more power
• Feather-touch trigger enables impressive control
• Built-in power regulator prevents over-torqing
• Tremendous power and longer life makes it the popular choice of professional mechanics for all types of work
• Offers all the advantages of the single hammer impact mechanism for removing and replacing bolts up to 7/16 inch without a struggle

User questions & answers

Question:	Is this impact made in China
Answer:	Charger is 100-240V
Question:	Is this the best I can get for my compressor which is rated for 3CFM @ 90psi
Answer:	Yes it does when using an impact wrench. Does not on a breaker bar or ratchet. Torque - VS - Torque Loss (Impact Wrench tested with Skidmore-Wilhelm) Real Tool Reviews video youtube.com/watch?v=4hdNk5XBqLs
Question:	Is this impact made in China
Answer:	Yes you can I work on cars and their hasnt been a bolt I can't remove I love this tool very much