12 best handheld cordless drill

• SUPER TOUGH; This power drill from Flamingo Tools features is tough enough to make light work of any home project; Our 8 volt drill set is engineered to professional standards and will power through any DIY challenge; When you need power tools that are built as tough as you, trust only Flamingo Tools
• COMPLETE KIT; This cordless drill set includes a 10mm (3/8”) chuck as well as a magnetic drill bit holder; Better still, our power drill set also comes with 5 reinforced drill bits as well as 5 screwdriver attachments; Your electric drill cordless kit contains everything you need
• LED LIGHT; Each one of our power drills features a smart LED light in the base that allows you to easily see your work; Say goodbye to fumbling in the dark with this advanced cordless drill from Flamingo Tools; What’s more, this electric drill features an ergonomic handle, making it less tiring to hold
• POWERFUL; This power drill cordless solution has forward and reverse controls as well as a fierce 21+1 torque setting; Better still, our cordless drill with battery and charger has a 550 RPM drive and a 1,500 mAh lithium battery; Flamingo Tools’ hand drill makes any home project a breeze
• ANY DIY PROJECT; People love our cordless drill combo kit for the simplicity and ease of use; This drill set combo kit will help you assemble flatpack furniture faster without hurting your hands; This battery drill is also excellent for delicate projects like repairs, mounting shelves and putting up hooks

User questions & answers

Question:	how long is the chain from the top of the fixture to ceiling
Answer:	It's whatever length you cut it to for your room. It probably came about 6-8 foot long.
Question:	what is the base plate dimensions
Answer:	The base plate is about 5 inches.
Question:	how many light bulbs does this light use
Answer:	Hi, it uses two bulbs.
Question:	Which is darker oil rubbed bronze or classic bronze
Answer:	Classic bronze is not bronze at all. It's grey! And once you purchase it you're stuck with it!
Question:	Is it 14 1/2 wide and 10 tall or vise versa
Answer:	14 1/2 wide and 10 tall is correct It is stunning. When people come in they think this thing cost hundreds and hundreds of dollars
Question:	Can the shade on the 1-light sconce be changed out? I see the replacement more decorative glass shades at the hardware store but will those work
Answer:	It could be if the base of the shade was the same size, but it takes a bit of work. I don't think I would purchase this item if I knew I was going to replace the shade. The fixture is quite attractive as sold.
Question:	What are the dimensions (H & W) of the mount
Answer:	Oval shaped mount is 4" W x 6.5" H approximately. I'm measuring t on the wall and it's hard to tell with the lights in the way. I hope this helps.
Question:	Is this light fixture dimmable
Answer:	All hard wired light fixtures are dimmable... it all depends on the bulbs you buy. Some compact fluorescent and LED bulbs are not dimmable
Question:	does this cone with 3 light bulbs included
Answer:	no they don't, i got the nice globe bulbs, looks great..
Question:	What are the dimensions of the base plate
Answer:	the base plate is 41/4" x 7".
Question:	What are the dimensions of the base part that goes against the wall? Will it cover a 4.5 inch round wiring box
Answer:	It's 6.5 inch long and 3.5 inch wide. You will have issue with the width if you have 4.5 round wiring box. one inch hole will be showing from width side :(

Product features

Berkshire Collection

The Berkshire collection features beautiful classic bronze finishes and amber glass.

Enjoy The Whole Collection

This collection can complete any home! Starting with the walls there is a single, two and three light wall mount fixtures. These would accent a bathroom or hallway with a touch of royal class. There is also a chandelier and an assortment of small ceiling mounted lights

Berkshire Collection

Check out the full line up of this collection on Amazon

Product description

Top Rated 12-Volt Cordless Drill And Tire Inflator

Product spec:

Item Weight：2.6kg

Package size:81x14x10cm

Drill speed:0-1500rpm

Max Clamping : 0.8-10mm

Torque:1-17

Speed set: 2 Variable Speed

Battery capacity:2AH

Working pressure:5-35PSI

Working current:4-6A

Air output:20L/MIN.

Package list:

1* Cordless Drill

Drill driver tool accessories:30PCS

1*Tire Inflator pump

3*nozzles

1*2ah battery

1*charger

• 【TIRE INFLATOR】Tire inflator with 3 additional nozzles. Powerful motor provides for faster tire inflation, support pressure up to 130 PSI, fast inflation at 30L/Min. Go from flat to full in just a few minutes! The LCD display 4 setting values and the current pressure, the tire inflator will shut off automatically when reaching the targeted pressure
• 【CORDLESS DRILL】 Cordless drill with 30pcs drill driver tool(including a tile drill). The power drill has a high-speed motor can provide max 17NM torque and 2 speeds (0-400 and 0-1500 rpm) , equipped with a 17-position clutch and can adjust the torque output to control the depth of the screw or fastener, so the chuck can clamp the bit without falling off and stop working
• 【2.0Ah RECHARGEABLE BATTERY】Our package equipped with 12V 2.0Ah rechargeable battery and 12V adaptor, its charging time can be extended 4 times, running time can be increased by up to 48%, and its weight is 45% lighter than nickel-cadmium batteries.Fully charged in one hour for power drill and cordless tire inflator
• 【WIDELY APPLICATIONS】Cordless drill combo kit only 2lbs and Ideal for home Improvement & DIY Project, car repair, drilling into wood, metal plastic and all screw driving tasks. Cordless tire inflator can quickly inflate balls, swimming rings bicycles, motorcycles, small and medium-sized cars including the SUV. Portable handbag is convenient for you to put in the trunk of the car or go anywhere
• 【60 DAYS FREE RETURN】Please feel free to contact us if you meet any problems.We can provide industry-leading warranty services and knowledgeable support experts. And you will get: 12V Tire inflator with 3 additional nozzles.Cordless drill with 30pcs drill driver tool(including a tile drill). 1-Battery, 1-Charger And operating instructions

Product description

The Ryobi P1832, is perfect for the DIYer, the homeowner, the contractor, and the tool enthusiast looking to add to their collection. This is a 6-in-one bundle that includes a drill/driver (P277), an impact driver (P235), two lithium ion batteries (P102), a charger (P118), and a lime green Ryobi tool bag. With all of these pieces together, you can perform a variety of tasks around the house from driving fasteners to boring holes. Keep your batteries in tip top shape with the lithium ion battery charger that works with all Ryobi batteries, either One+ lithium ions or those from the older blue series. The charger’s online fuel gauge lets you know how much your batteries have charged. The batteries themselves are compatible with anything from the Ryobi One+ system, on top of being backwards compatible with the older blue series of Ryobi tools. All of these tools can be stored together in the Ryobi lime green tote bag, which can double as a lunch pail in a pinch giving you maximum versatility on the jobsite. Reach your DIY potential with Ryobi

• P277 DRILL DRIVER: 24 setting clutch and dual speed gearbox gives you control over your drilling power while the keyless chuck makes for easy bit replacement to let you get to your jobs faster.
• P235 IMPACT DRIVER: With its gearbox housed in cast aluminum, this driver has 1600 in-lbs of torque coupled with a belt clip for easy access and a 1/4 inch quick connect coupler for easy bit changes.
• ONE+ COMPATIBLE: These two included batteries can work with any Ryobi tools in the One+ system. These 18 volt batteries live long for any job, from drilling and driving to strimming and sanding, and the P118 charger can handle any Ryobi battery, whether it is lithium ion or NiCad.
• EASY GRIP: The drill and impact driver feature notched rubber molding on their pistol grips for increased stability so you can get your job done in any almost condition.
• BIT STORAGE: Both the drill and impact driver have magnetic bit holders at the base, helping you stay organized so you can focus on your work.

User questions & answers

Question:	What is the best way to store the battery when not in use
Answer:	No it is not.
Question:	Will the P108 battery work with the P1832 drill kit and the P720 light
Answer:	not sure why it says that, it does require an 18v battery
Question:	Did anyone else have their charger die just 2 months after purchase
Answer:	yes, it is stored in the side handle.
Question:	Does this set include the battery? The description says so but the amazon specifications says it does not
Answer:	I would use 4-1/2" x 7/8" A/O Resin Fiber Sanding Discs, with an adhesive backing. You will also need a Backer. The backer is the piece that actually attaches to the tool. It is a rubber disc that the sanding discs stick to. The Backer will be the same measurements as the sanding disc, and the arbor will be the threaded the screw onto your tool. Larger sanding discs and larger backers are available but they may overload your tool.

Product description

The Black and Decker LD120-VoltA 20-Volt Max Lithium Drill/Driver with 30 Accessories come with the Black and Decker 20-Volt max Lithium Ion Battery. These batteries are always ready, holding a charge up to 18 months. This drill provides an extra level of control with a 24 position clutch that helps to prevent stripping and overdriving screws. It has a soft grip handle that provides added comfort during use and a light weight to prevent user fatigue. This drill is ideal for drilling and screwdriving through wood, metal, and plastic. The LD120-VoltA set includes: LD120 20-Volt MAX Lithium Drill/Driver, LB20 20-Volt MAX Lithium Ion Battery, LCS20 Charger, Brad Point Drill Bits, (10) 1-Inch Screwdriving Bits, 2-Inch Screwdriving Bits, Nut Drivers, Magnetic Bit Tip Holder and is backed by Black and Decker's 2 Year limited warranty.

• Ideal for drilling through or screwing in wood, metal, and plastic, soft grip handle provides added comfort during use
• The lithium ion battery holds a charge for up to 18 months
• 30 accessories include drill and screw driving bits, nut drivers, and magnetic bit tip holder
• Kit also includes one 20 volt lithium ion battery and charger; Uses: Drilling through wood, metal, and plastic, screw driving though wood, metal, and plastic. RPM: 0 650 rpm
• Chuck size: 3/8 inch; Clutch setting: 24; Included components: LD120 20 volt max Lithium drill/driver, LB20 20 volt max Lithium ion battery, LCS20 charger, brad point drill bits, (10) 1 inch screw driving bits, 2 inch screw driving bits, nut drivers, magnetic bit tip holder; Power source: Cordless

User questions & answers

Question:	What are the nut driver sizes
Answer:	The nut drivers are 3/16, 1/4, 9/32, 5/16.
Question:	Is this charger work in 220 Volt, and is this can drill con'c wall
Answer:	My husband says that you will need to buy a concrete bit which did not come in the kit. the bits that came with the drill are good for wood and metal. The charge is for 110 volt. Hope this helps.
Question:	Can l ues it to change tires
Answer:	Absolutely not. The lug nuts on tires are larger and require something like a torque wrench.
Question:	what size drill bits does it come with
Answer:	It came with 6 different drill bits I don't know how to classify the sizes.

Product description

The DEWALT DCF680N2 8V MAX Gyroscopic Screwdriver 2 Battery Kit features motion activation which allows the user to control variable speed, along with forward and reversing action by simply twisting the tool left or right. Motion activated variable speed ranges from 0-430 rpm; intuitive motion activated control allows for precise fastening into wood, plastic and light-gauge metal. Adjustable two-position handle allows the user to choose either the straight in-line position or pistol-grip configuration and the 15 clutch position settings allow control when completing light fastening applications. This work light also features 2 LED headlights which enables illumination in confined areas without shadowing. Battery indicator on the tool allows end users to know when to charge packs - one pack covers 5 days of runtime with the typical user. 8V MAX battery pack allows for longer run-time and charges in one hour. One-handed loading 1/4" hex-shank chuck allows for quick screwdriver bit change and holds 1" bit tips. This is an Ideal tool for any professional end user looking for a compact, portable screwdriver with precise speed control. Applications include: #8x1 5/8" Drywall Screw into 2" x 4" SPF, #8 & #6 Machine screw insertion and removal, #6 & #8 Cabinet hardware screws, electrical switch and outlet wall plate screws. Kit includes 1 hour charger, 8V MAX compact batteries and Kit Bag,.

• Motion-activated Variable Speed & Reversing Control For Precise Fastening Control
• 0rpm-430rpm For Fastening Into Wood, Plastic & Light-gauge Metal
• Adjustable 2-position Handle Allows For Operation In Either In-line Or Pistol-grip
• ¼ inch hex allows for quick screwdriver bit change and holds 1 inch bit tips
• Motion Activation Variable Speed and Reversing Control
• Motion Activated Variable Speed 0 - 430 RPM
• Adjustable two-position handle; straight or pistol grip

User questions & answers

Question:	What are the Dimensions
Answer:	It is about 6-1/2" from the tip where the it goes to the back of the handle. The handle part you grip is about 3-1/2" Side barrel is about 2" x 1-1/2". This is an awesome little screw driver for many home uses. Battery life is good for several small jobs of one bigger job. I would highly recommend for as a Home owner tool.
Question:	Are they lithium batteries
Answer:	yes, they are lithium ion batteries
Question:	is it good for tighten or loosening terminal blocks
Answer:	What I found that sometimes when I barely turned the drill to start the drill was not enough and when I turned it a little further for more torque... The drill would some times spin out the screw head slot. This was more my fault because I should have looked at the choke setting on the chuck to adjust it to a lower setting. I found to loosen a screw was that first...make sure that the screw tip is the correct size for screw head slot. Next with the bit in the drill chuck, put the bit in the screw slot. Then WITHOUT turning on the drill, turn the screw manually to break the tightened connection. Then with the drill chuck choke adjustment mid way or low setting would easily loosen the screw slowly when I wanted to loosen slowly. Plus this saved some time and battery on multiple connections. To tighten I had to remember to set the choke setting low and it would tighten and then the choke action would (rattle). Then I could increase the choke setting 1-2 steps to ensure the screw terminal was tight. I hope I this helps.
Question:	Different reviews seem to like the driver, but I get the impression that power is not its strong suit. does it really have enough torque to drive screws for various home projects? Thanks
Answer:	Definitely does the job on softer woods (e.g., basic 2x4s). I have been using it on all my shelving projects - mostly using #9 2-1/2" desk screws . The ability to change directions (in/out) makes it great for pre-drilling with a quick release drill bit without having to touch anything but the trigger. I am also impressed by the amount of torque this can generate, and the amazing battery life - really a great tool.

Product features

DEWALT 8V Max Gyroscopic Screwdriver Kit

Features:

Product description

From hanging pictures to assembling furniture, the Black+Decker 8V Max Cordless Drill/ Driver is the perfect power tool for all of your DIY tasks. Ultra lightweight (1.32 lbs) with a low voltage 400 rpm motor, you can take on your to-do list with ease. The 3⁄8” keyless chuck makes changing between bits simple. It even comes with a double sided bit to get you started. The integrated battery back is built right into the tool and powered by a jack plug charger that plugs right into your wall outlet.

• ULTRA LIGHTWEIGHT CORDLESS DRILL - Compact household drill/driver for a variety of drilling and screw driving applications with an 8V 400 rpm motor.
• HOUSEHOLD & DIY - No-fuss operation, ideal for household use
• CHANGE BITS EASILY - Keyless chuck for changing bits quickly
• BETTER CONTROL - Mid-handle design for easy control and balance
• BUILT-IN BATTERY - Integrated battery recharges with a jack plug charger

User questions & answers

Question:	Is this reversible for any mistakes and to undo the screws
Answer:	yes :)
Question:	Will this drill through cedar wood? I'm making a raised garden bed and don't need anything too fancy
Answer:	It sounds like you need something with a lot more power than this drill. This one is best used as a power screwdriver. As a drill, it's only meant for very light duty like making holes in drywall, 1/2" thick pine wood, or in general small diameter holes less than 1/4".
Question:	Does this product come with a chuck that can build Vape Mod wire
Answer:	Yes. I bought this drill specifically to make wire for my vape.
Question:	Can you use this drill by plugging it into the wall if the battery is dead
Answer:	No, only the charger plugs into the wall. The USB plugs into the drill.

Product features

LIGHTWEIGHT & COMPACT

Ideal for most household DIY tasks at just 1.32 lbs

INTEGRATED BATTERY

Built-in battery recharges with a jack plug charger

KEYLESS CHUCK

Switch between bits quickly and easily

EASY-GRIP HANDLE

Stay balanced and in-control with a mid-handle grip design

DIY All Day

Assemble furniture, hang pictures and wall art, tighten fixtures, hang up coat hooks, and more with one lightweight, easy-to-use drill.

DIY All Day

Assemble furniture, hang pictures and wall art, tighten fixtures, hang up coat hooks, and more with one lightweight, easy-to-use drill.

DIY All Day

Assemble furniture, hang pictures and wall art, tighten fixtures, hang up coat hooks, and more with one lightweight, easy-to-use drill.

DIY All Day

Assemble furniture, hang pictures and wall art, tighten fixtures, hang up coat hooks, and more with one lightweight, easy-to-use drill.

Product description

HUNDA Cordless Drill Driver, 12.8V Electric Drill Screwdriving Set



Specifications:

Rated voltage: 12.8V

Power: lithium-ion battery

Charging time: 1-2 hours

Type battery: 18650 lithium battery, 3900mAh

Nominal power consumption: 18W

Maximum torque: 28Nm

Speed: 0-450 rpm. 0-1450 rpm

Setting the torque: 25 + 1 setting

Use: DIY



Features:

Lightweight and Compact size

Two speed settings

Compact batteries and Fastest charge time

Versatile power modes

Powerful torque & drive settings

Indicator lights on Drill Driver



How to use:

Power switch operation



Hold down the trigger power switch and drill and will rotate. Release the hand and the drill will stop rotating.



*Note: Do not put debris into the air hole of the motor while using an electric screwdriver.

If debris gets in from the motor' s heat radiation hole, the motor will be caught and cause burnout of the motor or battery.

As soon as the motor gets stuck, turn off the power switch.



package includes:

1 * cordless electric screwdriver

2* battery 1 * box

31 * accessories

1 * adapter plug 1 * manual

• 【2 Pcs 3900Ah Battery& 1 Hour Fast Charge】 - Battery last long, it can be fully charged within 1 hour. Dual batteries to make sure you keep on doing long-time work without worrying about battery dying in middle, you can just swap with extra recharged one.
• 【249In-lb Torque & 2 Variable Speed】- Our cordless drill driver set delivers up to 249in-lb of torque, 2 variable speed settings (0-450 rpm and 0-1450rpm) allows countersinking without damaging material for multiple purposes.
• 【25 Position Clutch & LED Light】- 25+1 position clutch generates 150% precision of torque adjustment than regular 16+1 cordless drill, the built-in LED light increase visibility in low light working conditions.
• 【31 Pcs Accessory & Carrying Case】 - 10mm keyless chuck,this cordless power drill comes with 31pcs dill bits for wood, metal, plastic and masonry, enough attachment for most household drill or screwdriving jobs, a sturdy case to keep the drill and all of its accessories organized.
• 【Lightweight & Ergonomic Design】 - Strong but compact, new ergonomic handle design for increased comfort and less vibration. Not only for men use, also perfect for ladies, very convenient to carry when working outside. ★★★【What You Get】1×Cordless Drill Driver; 2×12.8-Volt Batteries; 1×Fast Charger; 31×Drill/Driver Bits; 1×Carrying Case; 1×User Manual; 1×12-Month Quality Promise

User questions & answers

Question:	Will this drill take 3/8" bits
Answer:	I don't see why not. mine is 24ft and they work great on it.
Question:	Is the product's accessories suitable for daily housework
Answer:	205/75R15 tires are 27.1 inches tall.
Question:	How is the product quality
Answer:	Depends on where you purchase them from. Check the manufacturers website!
Question:	Where is this made
Answer:	The DOT code on this product is 4218.

Product features

Two Power Batteries

The cordless drill can be charged with the quick charger. The technology in the charger will keep the lithium-ion battery from overcharging and overcharging.

2-Speed Gearbox

(0-450 RPM and 0-1,450 RPM) is suitable for many screwdriving and drilling jobs. The forward or reverse rotation is adjustable.

Multifunctional 31 Accessories

5 x cement drills, 4 x metal drills, 7 x hex nuts, 8 x screws, 5 x woodworking drills, 1 x connection, 1 x ceramic drill bits for DIY and drilling walls, wood, metal.

• 2 Fast Charging Batteries: The kit comes with two 12-Volt 2000mAh large capacity Li-ion battery packs, which means all-day operation is completely feasible and you never need to worry about running out of power in the middle of a project as long as you keep the spare charged up. A fast charger can charge one battery in as little as 1hour.
• 18+3 Torque Adjustment: This 12V Drill Driver can provide 220 inch-pounds of max torque and also allows you to choose between two speed setting (0 – 400 RPM or 0 – 1,500 RPM), so you will always have the power you need. The clutch has a total of 18 different torque settings and 3 modes (driving, drilling and hammer drill), in order to avoid incidents where you apply too much power and then wind up stripping the screw.
• Our drill driver weighs in at 2lb 3oz including the battery, which is very lightweight. You will be able to use it continuously without your arm getting tired too quickly. And the portable hard case allows you to take your tools to work anywhere, around the house or outdoors.
• Ergonomic Handle and Led light: The anti-slip grip ergonomic handle is made of really soft rubber, which fits nicely in your hand. Comes with a built-in LED work light, which will help you in situations when there is not enough light illuminating the work surface like small cabinets and drawers.
• What you get: 1*12V Cordless Drill Driver, 2* 12V Li-ion Batteries, 1* 12V Charger, 10*1” Screwdriver bits, 10*2” Screwdriver bits, 6*Nut Driver, 3* Spade drill bits, 5*drill bits, 1* Carry Case

User questions & answers

Question:	Is the battery interchangeable with the Craftsman Nextec
Answer:	Thank you for you question. The battery is not Not compatible with Craftsman Nextec.
Question:	Does drill have a reverse
Answer:	Thank you for your question. This drill features reverse mode. You can use the switch on the right of the LED light to select the foward or reverse. If you have any other questions please kindly contact with us. Best Regards, WORKPRO Customer Service Team-Jack
Question:	Is this made in the USA
Answer:	Does the manufacturer as listed sound American? HANZGHOU GREATSTAR INDUSTRIAL CO.LTD
Question:	The charger is blinking red, what does that mean
Answer:	Thank you for your question. It means the battery is too hot. If you have any other question. Would you please contact us via the enclosed link as below from Amazon message center with your order#? https://www.amazon.com/ss/help/contact/?_encoding=UTF8&marketplaceID=ATVPDKIKX0DER&ref_=v_sp_contact_seller&sellerID=A3P56LYOG94570 Or email us [email protected]. Thank you very much for choosing WORKPRO. Jack-EverBrite Customer Service Team

Product features

WORKPRO 12V Li-ion Drill Driver Kit include:

• 1*12V Cordless Lithium-Ion Drill Driver
• 1*Carry Case
• 1*12V MAX* charger
• 2*12V MAX* Lithium-Ion Battery Packs
• 10*2" Cr-v drill bits:1/8", 5/32", 3/16",1/4",PH1,PH2,PH3,S1,S2,S3
• 10*1" Cr-v drill bits:1/8", 5/32", 3/16",1/4",PH1,PH2,PH3,S1,S2,S3
• 5* Drill Bits:5/32", 3/16", 1/4", 5/16", 3/8" and 3*Spade Drill Bits: 3/8", 1/2", 5/8"
• 6 Nut Driver:3/16", 1/4", 9/32", 5/16", 11/32" and 1* 60mm magnetic extension bar

Driver Function:

• 1-6 Torque for small size screws
• 7-12 Torque for middle size screws
• 13-18 Torque for large size screws

Drilling mode is designed for drilling wood, plastic, metal, etc. Hammer drilling is perfect for drilling cement brick, tiles, etc.

Max Drilling Hole Diameter: Φ2/3" Wood; Φ1/4" Steel Plate; Φ1/3" Cement Brick

Wide Application

• 【Compact & Powerful】WAKYME drill tool set is designed with all-copper double bearing gear motor: 300In-lb torque max provides strong load capacity. No-load speed 19000-23000rpm powerful impact drill driver offers you all the daily needs and accomplishes more than you ever expected. The lightweight handy drill makes everything is impossible.
• 【18+3 Clutch, 2-Variable Speed & 300In-lb Torque】WAKYME 12.6V cordless drill/driver, with 18 adjustable clutch settings, step-less variable pressure trigger (2-speed: 0-350RPM,0-1500RPM) provide accurate control. 3 in 1 working mode (Hammer, Driver, Drill), 300In-lb torque(30N.M), no matter it is a household reconstruction, improvements, DIY handcrafts, renovation, garden work or auto repairs, this power drill is your good partner everyday drill/driver.
• 【No Interruption & Work Light】This cordless hammer drill comes with 2pcs 1500mAh Li-ion Batteries and 1-2H fast charger that can use for strong and steady power and endurable run time. The additional battery makes cordless screwdriver drill always ready to use without restriction. You can constantly work on your project. The lithium-ion drill driver in 12.6V-class with a front LED work light illuminates any dark workspace.
• 【3/8 Keyless Chuck & Forward/Reserve Control】This power drill is pretty easy and straightforward to use. Compact drill driver has a large 3/8’’(10mm) keyless chuck which provides an automatic spindle lock that enables one-hand changing with advance accessory compatibility. The Forward/Reverse switch allows you to either screw or replaces/remove bits on your purposes as well as lock the power drill driver.

User questions & answers

Question:	what is the weight of the drill with a battery
Answer:	Dear Amazon Customer, Thank you for your message. Our 21V Cordless Drill : the weight of the battery is: 319.2g, the weight of a single electric screwdriver is 953.6g (not including the weight of the battery) If you should need any further information about it, please feel free to contact us. We are always here for you. Support email: [email protected] Happy shopping.
Question:	I need a replacement charger. Where and how do I get it
Answer:	You might try contacting the seller or sometime if you look in the same area as the drill it will list those items. Hope this will help.
Question:	Does it unscrew
Answer:	Hi, Yes it does unscrew. Has a reverse button on the drill.
Question:	Does this drill also work in reverse
Answer:	Yes, it has the ability to reverse. It has a forward/reverse button on the drill. Please note the button needs to be pushed to the end. If the button is only pushed to the middle, then it is a safety lock function

Product features

30Nm-300In-lb Torque Max

3 in 1 working mode (Hammer, Driver, Drill). 18-position torque selector features minimizing the likelihood of overdriving or snapping screws.

300In-lb torque max provides a strong load capacity. No-load speed 19000-23000rpm.

3/8" Keyless Auto Chuck

Large 3/8"(10mm) Auto Chuck helps to fasten screws in seconds, no worry of screws loosens while at work.

It will provide more precision of torque adjustment as needed.

2-Variable Speed

The drill kit is designed with variable 2-speed settings (0-350RPM, 0-1500RPM) to provide accurate control for DIY your any projects.

Stepless Speed Control

The variable pressure trigger alows you stepless control the drill speed easily. Multiple purposes to match your desired application.

Convenient Work Light

Impact driver kit built in a front LED light illuminates any dark workspace.

With this convenience bright led work light, you can work in any work situations.

Double-end Driver Bits

The drill designed with two slots for put two double-end bits, it's very convenient for a urgent work and will not let your bits lost.

Forward/Reserve Control

The F/R lever of this impact driver combo kit easily controls the direction of drilling, enables quickly secure or remove screws. By setting the switch in the center position, it will lock the tool for safety.

2pcs 1500mAh Li-ion Batteries

Come with 2pcs 1500mAh Li-ion Batteries and 1-2H fast charger that can use for strong and steady power and endurable run time.

You can constantly work on your project.

Everyone can be a good designer and creator

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

The Black & Decker LBXR20 20 Volt MAX Extended Run Time Lithium Battery is compatible with the 20-Volt MAX line of power and gardening tools. These batteries have been formulated for longer runtime and improved performance. This battery is compatible with cordless tool models BDC120VA100, BDCDMT120, BDCDMT120-2, BDCDMT120F, BDCDMT120IA, BDCF20, BDH2000SL, LD3K220, LCC220, LCS120, LCS120B, LD120VA, LDX120C, LDX120PK, LDX120SB, LDX220SB, LDX220SBFC, LGC120, GLC120B, LHT210, LHT2220, LHT2220B, LLP120, LLP120B, LPHT120, LPHT120B, LPP120, LPP120B, LST220, LSW120, LSW20, LSW20B, SSL20SB, SSL20SB-2.

• Ideal for drilling into wood, metal plastic and all screw driving tasks
• Chuck Size: 3/8 inch; Clutch Setting: 11; Included Components: LDX120 Drill/Driver, LBX20 20V MAX* Lithium Ion Battery, LCS20 Charger, Double Ended Bit; Power Source: Cordless
• Lithium Ion Technology & 20V MAX: Lighter, more compact, no memory, longer life
• 11 Position Clutch: Provides precise control for drilling into wood, metal, plastic, and all screwdriving tasks
• Compact and Lightweight: Less fatigue and allows users to drill / screw in confined spaces. Part of the 20V MAX System A System that Demands Attention
• Variable Speed: Allows countersinking without damaging material

User questions & answers

Question:	does it come with a light
Answer:	Yes, this hose is 4.0 I.D. X 75.0 LG.
Question:	Can i leave it charging over night without harming battery
Answer:	I ended up buying a totally new bag both of my closures failed. You can't fill the bag too much or those wing nuts tear loose from the bag. I use these to support the bag closure spring clamps. Just clip them along the edge after you fold the flaps over to close the bag. I use 2 clamps. Here's something like what I use. https://www.amazon.com/Lenox-Tools-VGP58100-Quick-Grip-Spring/dp/B00002244Z/ref=sr_1_4?ie=UTF8&qid=1543928604&sr=8-4&keywords=Irwin+spring+clamps
Question:	Does it come with charger and battery
Answer:	I have ordered and used it It is a quality replacement bag.. A bit expensive but good as original equipment
Question:	Is this drill sized and weighted well for use by a woman
Answer:	If you have the bag opening past the lip where the snout bolts on the bag will not come off. I cut the rear snout off behind the flange and put my bag on past the flange and it doesn't loosen. The cinch strap just needs put through the catch properly, with the teeth against the inserted end, so it stays tight.

• Introduction - A lithium battery impact Driver is very suitable for home use. It has light weight, large battery capacity and long battery life, so it can meet all kinds of needs at home.Famous brand products, excellent quality
• Technical Data - Impact Driver rate Voltage 20V,No-load Speed 0-1800rpm,Max torque 180N.m, Driver head 1/4inch,Battery type Lithium-ion 1.5Ah,Battery model PS76018B,Charge time 1hour, Charger model PS76018C,Weight 3.1lb.
• Assemble - To install the driver bit, pull the sleeve in the direction of the arrow and insert the driver bit into the sleeve as far as it will go. Then release the sleeve to secure the driver bit. No tools, easy and fast.
• Advantage - The belt hook is convenient for hanging on your belt.With built-in LED lights, which can increase your visibility in enclosed work spaces or any dark environment and let you effortlessly screw wood, plastic, drywall, brick, concrete, and metal.

User questions & answers

Question:	Is this brushless
Answer:	No, the motor for this imapct driver is not brushless.
Question:	Where can I get extra batteries
Answer:	Dear Customer, we have replacement batteries sold on Amazon, please check ASIN: B089Y4QS2Q, ASIN: B08KDPRQ3T.
Question:	The title says it comes with the battery and charger, but under the description it says bare tool. Are the charger and battery included or not
Answer:	Yes, the product includes power pack. The product comes with one powersmart 20V 1.5A Li-ion battery and one-hour fast charger. 4PCS Screwdriver bits (PH3/PH2/PZ1/PZ2) ,4PCS Nut driver bits (M8/M10/M14/M17) are also included.
Question:	What comes with tool
Answer:	POWERSMART Cordless impact driver / Belt hook / Screw / User manual / 20V 1.5A POWERSMART Li-ion Battery and fast Charger/ 4PCS Screwdriver bits (PH3/PH2/PZ1/PZ2) ,4PCS Nut driver bits (M8/M10/M14/M17)