9 best tube kits for pressure washers

Product description

Genuine replacement water outlet kit used on select pressure washer pumps.

• Briggs and Stratton 201497GS
• Outlet kit
• Genuine Briggs and Stratton part
• Consult owners manual for proper part number identification

User questions & answers

Question:	Where does this part fit
Answer:	The brown top is the rain fly. It comes with the tent. You can of course buy a different one if you don't like it.
Question:	Does this fit on a devilbiss wgvb2122 pressure washer
Answer:	I used the Coleman tent sealer on this one right after I got it. The first time I pitched it was in the back yard and I sealed it then and left it up overnight to be sure the sealer dried before I packed it up. I will spray the seams with Kiwi Camp Dry once a year now. So far there has been no water in this tent. On the last camping trip we got 3 consecutive days with at least 2 hours of steady rain including some hard driving downpours and this tent did not leak a single drop on us.
Question:	Is this part aluminum?? Doesnt say in description
Answer:	Yes, ofcourse.It does a good job on my patio
Question:	will this fit the crafstman 2200 PSI
Answer:	Just attach it to the tip of the wand. If one is already attached push down to remove it

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Pick up the Valley Industries soap tubing kit for your pressure washing needs. Features 3' of durable plastic hose for extra reach. Includes a low pressure soap suction filter to keep contaminates from entering your pump.

• Features 3ft of durable plastic hose for extra reach
• Includes a low pressure soap suction filter to keep contaminates from entering your pump

User questions & answers

Question:	Does it have a check valve
Answer:	Yes, this piece is made of cast aluminum.
Question:	What material is the filter
Answer:	Don't really know. We purchased it for resale. However, most are standard on the outlet. No much help am I?
Question:	Does the filter have a metal weight as shown in the Amazon website picture or without a weight as reported and shown in the customer image
Answer:	You can fit 3 standard height (8-1/2") queen air mattresses in this tent but it will leave little-to-no room for equipment. So to answer the question, YES, you could fit them on either end. Just make sure you keep them from touching the walls in case it rains as it will cause rainwater to wick through. We typically will have 4 people in this tent on 2 queen air mattresses and there is plenty of room for equipment and elbow room. Occasionally we will have 5 people in it and will add a twin air mattress and it's still pretty roomy even after equipment.
Question:	what is the tubing size. Can this be used to siphon gasoline
Answer:	Coleman warranty department is useless... Order two 7mm pole replacement kits by Stansport offered on Amazon for $11....

Product features

Spray Guns & Lances

Spray Nozzles

Hoses & Fittings

And More!

Product description

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

• New WATER OUTLET TUBE
• The ROP Shop Compatible OUTLET TUBE Replacement for Briggs & Stratton & Troy-Bilt Pressure Washer Pump
• Replaces for Briggs & Stratton: 190589GS 190634GS 201494GS

User questions & answers

Question:	will this fit Devilbiss 2227cwb
Answer:	There is no weight on the one I purchased
Question:	Would this fit my generac 01292-2 . Its 2.9 gpm and 2300 psi
Answer:	I wouldn't recommend it in a car\truck, but in a gas can sure.
Question:	Will it fit a generac model
Answer:	This part is not part of the engine. It is the part that screws into the bottom where the water comes out. The high pressure hose connects to this part.
Question:	how many psi
Answer:	Yes it fits

Product features

RMV25G30

Annovi Reverberi RMV25G30 horizontal plunger pump. 2.5 GPM at 3,000 PSI, spins at 3,400 RPM with 3/4" shaft and designed for gasoline engines. Comes with easy start valve (EZ).

What is EZ

EZ equals “easy engine start”. The easy start was designed for easy of engine start with the benefit of safety conditions starting a pressure washer. With an EZ installed on the pump the user will not have to hold open the trigger gun to relieve the pressure when starting an engine.

EZ is a value inside the pump that automatically / mechanically relieves the built-up pump pressure when the engine is being pulled started. This built up pressure is coming from the engine turning over the pumps cylinders that are compressing and trapping this compressed water inside the manifold of the pump. Eventually; without relieving this pressure from the pump the engine would be impossible to pull or turn over.

Product description

Tips

1.Follow the direction of arrow in the brass injector to connect it to pump and hose. The direction of arrow is the flow direction of chemical.

2.Must work with black soap nozzle which attached to pressure washer gun or wand.

3.To get the flow established you will need to make sure the soap is thin, like water.

4.At the end of washing work, put the chemical injector out of the chemical tank and then put it in the tank with clear water. Please keep spraying for a while to run out the remaining chemical in Injector and tubing.

Trouble shooting:

1.Adjustment Closed: Open metering valve by turning the knob on the chemical injector.

2.Plugged Orifice in Body : Remove the chemical injector and clean or soak in warm water.

3.Plugged Filter : Replace or soak in warm water to clean.

4.Cracked or Damaged Tube : Replace the clear soap tube.

5.No chemical flow: You may need to lift the chemical container to the same level or a little above the pressure washer to let gravity help you establish the siphon. Once it's started you should be able to put the chemical container back on the ground. If you keep losing the siphon, letting the container sit on a box to lift it a bit should help.

• Attention: Max pressure is 3200 PSI. Pressure washer downstream chemical injector kit includes chemical injector, 10 feet tubing (siphon hose), filter and black soap nozzle.
• Used to siphon detergent out of separate container. The chemical or soap runs after pump, which will not damage pump. Great for cleaning or spraying.
• Control metering valve to adjust dilution ratio of chemical and water. Chemical-resist and poly strainer reduces injector clogging.
• Soap injector has universal 3/8’’ quick disconnect. It connects between pressure washer pump and hose.
• Flow rate is from 2 GPM to 5 GPM. Works with most brands of gas and electric pressure washer, cold and hot water pressure washer.

User questions & answers

Question:	Will this fit generac onewash power washer 3100 model #g
Answer:	It was an exact fit for my Generac Model0065980
Question:	How many feet of hose is this injector rated for
Answer:	Up to 3000 psi. More information is located here: http://www.arnorthamerica.com/rmseriespumps.html
Question:	what is the small metal disk that looks like a thickwasher used for? is this a weight for the siphone filter
Answer:	This is just a simple filtered tubing that's meant for pressure washers with a soap inlet. you put the open end of the tube on the soap inlet and drop the filtered end into the bottle of soap and it gets drawn into your pressure washer for application on whatever you're spraying.
Question:	Do you size injector to the psi of washer or gpm of washer? I have a 4000 psi rgpm washer, would this work
Answer:	It appears to be stainless steel screen

Product features

SPECIFICATION

APPLICATION

Used to siphon detergent out of separate container. The chemical or soap runs after pump, which will not damage pump. Great for cleaning or spraying.

Package List

1 * Chemical injector;

1* Tubing (siphon hose), 10 feet;

1 * Filter;

1 * Black soap nozzle;

2 * Teflon tape.

Product description

MATCC Sewer Jetter Kit for Pressure Washer 5800 PSI Drain Cleaning Hose 100FT



Features:

Durable Materials for pressure washer hose for durable use

The hose is oil, weather, ozone, and abrasion resistant

5800 PSI working pressure and burst pressure is up to 11000 PSI

Easy to connect with most pressure washer and gun

can be applied to the removal of any blockage,Such as toilets, bathrooms, kitchens and outdoor plumbing



SPECIFICATION

Length: 100 FT / 30M

Working pressure : 5800 PSI

Burst pressure: 11000 PSI

Connection: 1/4” M-NPT

Materials: Thermoplastic polyester/Brass/Stainless steel



INTRODUCTION OF PARTS

Button Sewer Jetter Nozzle

Materials：Stainless steel

1 front jet：0°spray angle，move forward to clear blockages

3 rear jets：33°spray angle，remove loose debris from the front

Orifice 4.0



BCornered Sewer Jetter Nozzle

Materials：Stainless steel

1 front jet：0°spray angle，move forward to clear blockages

6 rear jets：33°spray angle，There are 6 holes in the back, with more powerful jet power, suitable for corner cleaning

Orifice 4.0



BRotating Sewer Jetter Nozzle

Materials：Stainless steel&Brass

3 rear jets：The rotating nozzle can quickly carry hoses down the drain，flush debris and trash evenly, suitable for use in fixed or hard pipes

Orifice 4.5



PACKAGE INCLUDED

100 FT / 30M Sewer Jetter Hose * 1

M22-14 adapter * 1

1/4” quick connector * 1

Sewer Jetter Nozzle * 3

Thread Seal Tape * 1



As there are many parts in the combination, please feel free to contact MATCC customer service team if you have any questions

• 【Durable Materials for 5800 PSI Hose】Inner tube made of thermoplastic polyester, Thickened reinforcement layer of high tenacity polyester textile braid, Cover layer of Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistant. 5800 PSI working pressure and burst pressure is up to 11000 PSI to prevent from rupture and longer working life.
• 【Easy to Use】Both ends of the hose is 1/4”M-NPT, Sewer Jetter Kit equipped with M22-14 adapter and 1/4” quick connect plug, it can be easily applied to most pressure washer and gun. Nozzles are made of stainless steel or brass, not easy to break or rust.
• 【Accessories include】① Corner Sewer Jetter Nozzle: water sideways to clear blockages at the corner, 6 rear jets for more powerful cleaning. ② Rotating Sewer Jetter Nozzle: 3 backward rotating spray, easy to slide into sewer lines and drain pipes. ③Button Nose: 3 rear jets at 33° flush out debris loosened by the front jet. ④Thread Seal Tape: fill the gap between the parts to prevent from falling or leaking during use.
• 【Compatibility】Contains 3 Pressure Drain Jetter Hose Nozzles and 2 adapters，can be applied to the removal of any blockage,Such as toilets, bathrooms, kitchens and outdoor plumbing of various kinds.
• 【100% Risk-Free Warranty】: One Year Warranty. Contact seller directly if any issues, MATCC Service Team will respond you within 24 hours during working days. MATCC always stand behind our products and customers.

User questions & answers

Question:	What pressure washer should I buy? what psi must be for this drain cleaning hose work properly
Answer:	Sorry. Not work with 4000 PSI pressure washer. The max working pressure for this chemical injector is 3200 PSI
Question:	Will this sewer jetter hose work with a 1600 psi pressure washer
Answer:	junk pump
Question:	Is there any warranty on this product? What should I do if damage
Answer:	According to the product description for this pump, shown on the Amazon website, it is compatible with your Generac washer. It puts out 3000 psi rather than 2300, so be sure your fittings and hoses are rated at least 3000 psi. It is a very easy swap out. Remove the allen head bolts, and slide the old pump off. Make sure you keep the key way on the engine spline. Slide the new pump on and align the holes. Install the allen bolts and you are done. Took me less than 10 minutes to replace the pump. My old washer now works like a brand new one.

Product description

Used to siphon detergent out of a separate container For use with most brands of pressure washers Includes a filter to ensure no contaminants enter the pressure washer pump Help keep your pressure washer running at peak performance Genuine OEM replacement part

• Pressure washer chemical injector tubing kit includes 10 feet replacement tubing, two filters. The tubing can adjust and cut based on your needs.
• ATTENTION: Siphon Hose: Inside Diameter: 7.0 mm; Outside Diameter: 9.3 mm; Length: 10 feet.
• Application: Used to siphon detergent out of separate container. It allows for a wider choice of chemicals.
• The filter can avoid contaminants enter the pressure washer hose, pump or gun.
• Works with most brands of gas and electric pressure washer.

User questions & answers

Question:	Is this hose a 1/4 inch
Answer:	This sewer jetter hose has 1 year warranty, you can send messages to seller if any issues, they will help you.
Question:	Will this fit Simpson honda motor gc 190 pressure washer
Answer:	As long as your pressure washer pulls cleaning solution from where the hose hooks up to the pump, it should.
Question:	Will this fit my dewalt 3600 psi
Answer:	I have a 3100 2.8 gpm and it only worked on 25 feet of hose trash I got it to use on 150 feet
Question:	Will this fit the simpson ms60773 power washer
Answer:	Yes it is a weight. It goes inside the plastic housing to keep it from floating .

Product features

Feature

Manual

1.Follow the direction of arrow in the brass injector to connect it to pump and hose. The direction of arrow is the flow direction of chemical.

2.Must work with black soap nozzle which attached to pressure washer gun or wand.

3.To get the flow established you will need to make sure the soap is thin, like water.

4.At the end of washing work, put the chemical injector out of the chemical tank and then put it in the tank with clear water. Please keep spraying for a while to run out the remaining chemical in Injector and tubing.

Trouble shooting

1.Adjustment Closed: Open metering valve by turning the knob on the chemical injector.

2.Plugged Orifice in Body : Remove the chemical injector and clean or soak in warm water.

3.Plugged Filter : Replace or soak in warm water to clean.

4.Cracked or Damaged Tube : Replace the clear soap tube.

5.No chemical flow: You may need to lift the chemical container to the same level or a little above the pressure washer to let gravity help you establish the siphon. Once it's started you should be able to put the chemical container back on the ground. If you keep losing the siphon, letting the container sit on a box to lift it a bit should help.

• 【Durable Pressure Washer Sewer Hose】- Sewer jetter kit for pressure washer has thickened inner tube, cover and reinforcement. Inner tube is made of thermoplastic polyester. Cover layer is made of thermoplastic polyurethane which is oil, weather, Oxidation and abrasion resistant. Burst pressure up to 11,000 PSI. Temperature ranges from -40°F to +160°F.
• 【Compatible Sewer Cleaning Hose】- Buyplus sewer jetting hose can connect to pressure washer pump with M22 coupler (female M22 to female 1/4’’ NPT). It can also connect to pressure washer wand or trigger gun with 1/4’’ quick disconnect plug. Works with many pressure washers up to 4,400 PSI.
• 【Button Nose and Rotating Nozzle】- Practical sewer jetting nozzle. Button Nose Sewer Jet Nozzle: 1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet. Orific 4.0. Rotating Sewer Jet Nozzle: it offers an even cleaning and flushes out debris by 3 backward rotating spray jets blasting into clogged pipe and clean it. Orifice 4.5.
• 【Pressure Washer Hose Kit Application】- Buyplus sewer jetter hose for pressure washer can be used to clean cars, motorcycles, floors, windows, driveways, roofs, siding, etc. Ideal for all types of medium and high-pressure jetting applications,such as sewer and drain pipes.
• 【100% Satisfaction Service】- If for any reason you're not 100% satisfied or you have any question about our pressure washer sewer jetter kit, please feel free to let us know and our customer service team will always be here to assist.

User questions & answers

Question:	Are there instructions comes with the sewer jetter kit for what each nozzle does and how to use
Answer:	yes, it works.
Question:	Will this sewer jetter hose work with a 1600 psi pressure washer
Answer:	Inside Diameter: 1/4 inch
Question:	Can i just atach the cleaning drain hose to my power washer hose
Answer:	Your gc 190 Honda has a different set up. Look at the bottom of the pump for the manufacture of the pump. look up the company on the internet for proper valve.
Question:	Will this connect to greenworks electric pressure washer
Answer:	yes it is universal
Question:	Can this be used to clean out a clogged gutter
Answer:	Siphon Hose: Inside Diameter: 7.0 mm; Outside Diameter: 9.3 mm. If the size of your original soap hose is close, than it fits.
Question:	I purchased this and then found out my Excell Honda pressure washer existing hose fittings were too large , is there an adapter for 5/16” to
Answer:	I can only answer the question with what I am using. I am using a 1600 psi electric washer. It worked very well. I really don't know why a higher pressure washer would work any better. the holes in the nozzles allow the water to come out so intense working like a knife on the pipe removing the stuff on the pipe. If I wasn't happy with this product I would tell you that. But it work with what I have. Robert
Question:	Will this work down and thru a 4" p-trap
Answer:	YES, that's what I have and used a 1600 psi washer. I will go further and tell you that it worked extremely well. If you are looking at the Jetter with the four nozzles then the one that spins works extremely well. Holes in it are small but works like a knife removing the stuff in there from the pipe. I was impressed with. I used it in a 2" drain. It took a little working it up and down before it made the first 90 degree turn past the cleanout. but once it did it went on down into the drainpipe for 60 feet which was the other end. I feel it's worth the money and is now keeping from having to replace the entire pipe which would be several thousand dollars. for at least a little longer. Robert

Product features

Feature of Hose

Application

1. Corner sewer jetter nozzle: 1 water spray sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.
2. Button nose sewer jet nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0
3. Rotating sewer jetter nozzle: 3 backward rotating spray blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5.
4. Sewer jetter hose has a solid end which connects to sewer nozzle. The other end is swivel which releases stress between sewer hose and gun / pressure washer oulet.

Package List

1 × sewer jet hose

1 × button nose sewer jet nozzle, orifice 4.0

1 × M22 female to 1/4’’ female NPT coupler

1 × 1/4’’ quick connect plug.

1 × rotating sewer jetter nozzle

1 × corner sewer nozzle

Buyplus Sewer Jetter Kit for Pressure Washer

50FT Material:

• Inner Tube: Thermoplastic polyester tube
• Reinforcement: Chemically bonded 1/4" high tenacity polyester textile braid
• Cover: Black thermoplastic polyurethane, oil, weather, ozone, and abrasion resistant
• Temperature Range: -40°F / +160°F
• Hose I.D: 0.25"; O.D: 0.48''

Packing List:

• 1 x Sewer jet hose
• 1 x Rotating sewer jet nozzle
• 1 x Button nose sewer jetter nozzle
• 1 x Coupler (female M22 to female 1/4’’ NPT)
• 1 x 1/4’’ quick disconnect plug

Button Nose Sewer Jetter Nozzle

1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet. Orific 4.0.

Rotating Sewer Jet Nozzle

It offers an even cleaning and flushes out debris by 3 backward rotating spray jets blasting into clogged pipe and clean it. Orifice 4.5.

1/4’’ Quick Disconnect Plug

With the 1/4’’ Quick Disconnect Plug, it can be used to connect to pressure washer wand or trigger gun.

M22 Coupler (female M22 to female 1/4’’ NPT)

With the M22 coupler (female M22 to female 1/4’’ NPT), it can be used to connect to pressure washer pump.

• 【Durable Pressure Washer Sewer Hose】- Sewer jetter kit for pressure washer has thickened inner tube, cover and reinforcement. Inner tube is made of thermoplastic polyester. Cover layer is made of thermoplastic polyurethane which is oil, weather, Oxidation and abrasion resistant. Burst pressure up to 11,000 PSI. Temperature ranges from -40°F to +160°F.
• 【Compatible Sewer Cleaning Hose】- Buyplus sewer jetting hose can connect to pressure washer pump with M22 coupler (female M22 to female 1/4’’ NPT). It can also connect to pressure washer wand or trigger gun with 1/4’’ quick disconnect plug. Works with many pressure washers up to 4,400 PSI.
• 【Button Nose and Rotating Nozzle】- Practical sewer jetting nozzle. Button Nose Sewer Jet Nozzle: 1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet. Orific 4.0. Rotating Sewer Jet Nozzle: it offers an even cleaning and flushes out debris by 3 backward rotating spray jets blasting into clogged pipe and clean it. Orifice 4.5.
• 【Pressure Washer Hose Kit Application】- Buyplus sewer jetter hose for pressure washer can be used to clean cars, motorcycles, floors, windows, driveways, roofs, siding, etc. Ideal for all types of medium and high-pressure jetting applications,such as sewer and drain pipes.
• 【100% Satisfaction Service】- If for any reason you're not 100% satisfied or you have any question about our pressure washer sewer jetter kit, please feel free to let us know and our customer service team will always be here to assist.

User questions & answers

Question:	Will this work with the harbor freight portland 1750 psi 1.3 gpm electric pressure washer? anyone tried it
Answer:	Yes. Just go online and search or go down to your local hardware store. I’m sure they have what you need. They’re all over the web. Just a little effort needed to make it work.

Product features

Buyplus Sewer Jetter Kit for Pressure Washer

• Length: 100 Feet.
• Bend radius of the hose: 4.3 inch.
• Working Pressure: up to 4400 PSI.
• Burst Pressure: up to 11000 PSI.
• Temperature Range: -40°F / +160°F.
• Hose I.D: 0.25"; O.D: 0.48''

Packing List:

• 1 x Sewer jet hose
• 1 x Rotating sewer jet nozzle
• 1 x Button nose sewer jetter nozzle
• 1 x Coupler (female M22 to female 1/4’’ NPT)
• 1 x 1/4’’ quick disconnect plug

Button Nose Sewer Jetter Nozzle

1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet. Orific 4.0.

Rotating Sewer Jet Nozzle

It offers an even cleaning and flushes out debris by 3 backward rotating spray jets blasting into clogged pipe and clean it. Orifice 4.5.

1/4’’ Quick Disconnect Plug

With the 1/4’’ Quick Disconnect Plug, it can be used to connect to pressure washer wand or trigger gun.

M22 Coupler (female M22 to female 1/4’’ NPT)

With the M22 coupler (female M22 to female 1/4’’ NPT), it can be used to connect to pressure washer pump.

Product description

Sewer washer kit high pressure washer 150 Ft 1/4 inch NPT, tube cleaning hose, button nose and rotating sewer nozzle, orifice 4.0, 4.5, pressure 5800 PSI



Specifications:

Length: 150-foot drain cleaning hose has an inner tube, cover and stiffener

Material:

The inner tube: thermoplastic polyester

The cladding: thermoplastic polyurethane

The reinforcing layer: 1/4 inch high strength polyester textile woven layer

Joint: 1/4 inch NPT male head



Button-down sewer spout:

An angle with a 0° rake can clear the blockage. 3 Rear ejectors (at an angle of 33°) can flush loose debris from the front ejector.



Rotate the sewer nozzle:

Rotate the sand blast backward 3 times into the blocked pipe and push the nozzle through the pipe. Nozzles slide easily into drains and drains. It provides a uniform cleaning and rinses off the debris.



Essential and practical:

The solid end of the sewer jet hose is connected to the sewer nozzle. At the other end is a rotary joint that releases the pressure between the drain hose and the high-pressure washer outlet.



Package includes:

1 x 150-foot sewer spray hose

1 x Rotating nozzle

1 x Nasal sewer nozzle

1 x Coupler (female M22 to female 1/4 inch NPT female)

1 x 1/4 Inch quickly disconnect the plug

1 x Waterproof tape

• High pressure cleaning kit: sewage nozzles kit includes 150 ft sewage nozzles with detachable joints that do not knot when rotating, push-button sewage nozzles, rotary sewage nozzles, 1/4 inch quick joints, fittings (female M22 to female 1/4 inch NPT) and waterproof tape
• Compatible with: the sewer parts of the high-pressure washer can help you to dredge more types of indoor and outdoor drainage equipment; It is compatible with most brand of high-pressure washer and can easily wash away obstacles; The working pressure rating is 5800 PSI; The bursting pressure is rated at 11000 PS
• Material: high pressure jet hose with inner tube, cover and stiffener, the inner tube is made of thermoplastic polyester, the coating is made of thermoplastic polyurethane and is resistant to oil, weather, ozone and wear
• Button-down sewer spout: an angle with a 0° rake can clear the blockage; The 3 rear nozzles flush loose debris from the front nozzle at an angle of 33°, orifice is 4.0
• Wide applications: quick plug and metric M22 through 1/4 inch NPT internal thread joints quick plug, suitable for many situations where high pressure connections are frequently joined or removed, for quick replacement of high pressure washer outlet, sewer injector hose and nozzle; Connect firmly to the quick connector each time, the high-pressure washer connector converts the metric M22 14 mm NPT internal thread to 1/4 inch NPT internal thread