11 best stanley corded drills

Product description

For big projects, the SKIL 6335-02 7.0 amp 1/2 inch corded drill has a powerful motor that gives serious DIY'ers the power to bore through hard and soft woods and other materials. Hold steady with the side-assist handle. The variable speed trigger accelerates smoothly from low to high speeds, while the 2-finger trigger with lock-on option gives you even more control. The 6335-02 Corded Drill also features a built-in level and keyless chuck, which takes ½-inch bits for the toughest jobs.

• Poweful 7.0 Amp motor for tough applications
• 1/2 inch keyed chuck to accept large diameter bits designed for wood working and cutting
• Side assist handle for controlled, accurate drilling
• Variable Speed trigger for controlled drilling speed

User questions & answers

Question:	What is the Torque rating
Answer:	You MAY NOT use this device with 220 volts power without step-down transformer 220v to 110v. This transformer shoud be capable to transform at least 1KW (1000W) of power (twice of the device power consumption - 110v * 4 Amps = 440W for this drill). Such transformer is big ang heavy (of about 5-7Kg). If you connect 110v device with 220v power outlet using only plug adaptor you'll get smoke and completely dead device usable as garbage only.For market with 220v this MATRIX system is branded as "Multievo". Try to find it on the European market for example.
Question:	What is the chuck diameter (?43mm
Answer:	Variable speed = Trigger. "Would this work?" = Probably, however, the correct answer is that I can't really tell you based solely on the thickness of the material. Two other variable exist: the size of the hole and the quality of your bits. Most drills and bits out there can do (1) 3/8" thick hole through annealed high carbon steel, however, if you use cheap bits, and/or the wrong amount of pressure/speed, that bit won't drill another hole. I give that size hole simply because of the chuck size. If you get bits with a smaller shank and larger bore size you can do larger holes.
Question:	Is this drill free wheeling when you let off the trigger
Answer:	3/8" chuck but if u can buy a 1/2" drill bit that has a shank turned down to 3/8" now u have a 1/2" drill or bigger because u can get other size bits with a 3/8" shank the end that goes into your chuck. FYI
Question:	What is the maximum speed
Answer:	For those of you who came looking to see if the product had been improved in recent years, literally zero of these comments are helpful. The manuals on the accessories (c. 2015) show a 10-20% LOSS of power in the corded model. I don't know, however, what the amps were on my original corded and whether or not this model is more powerful than the 2015 version.

Product features

Power through tough jobs like a pro

The SKIL 6335-02 7.0 Amp 1/2 In. Corded Drill is driven by a 7.0 amp motor that empowers the drill to perform tough jobs with utmost ease. The drill works smoothly in various metal surfaces and wood. It can also drill holes in concrete surfaces. The 1/2 inch keyed chuck is perfect for woodworking as it lets you use bits with a large diameter.

Ergonomically Designed

The drill is so light weight that it is easy to maneuver and to carry out any job. Also, it has a side-assist handle that provides the user a support and hold on the machine. For additional safety and control, it features a 2-Finger trigger with lock-on.

Variable Speed Options

The variable Speed trigger present on the drill gives the user the much needed control over the drill. The user can adjust the speed of the drill according to his need and as per the requirement of the job. Any speed you choose, the Horizontal bubble level ensures perfect outcome, every time.

Product description

The DEWALT DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck features a powerful 7.0 amp motor which gives the user the power to get the job done! It has a compact pistol grip design that allows for user comfort with a light weight design decreases user fatigue. The user-friendly lock-on switch reduces user fatigue allowing for extended usage. This drill also has a variable speed trigger switch which gives the user greater versatility. This unit also includes a chuck key. Lock-On switch reduces fatigue

• The product is 3/8", Heavy Duty, VSR Drill
• Easy to use
• The product is manufactured in China
• A powerful 7.0 Amp motor
• Compact and Lightweight design
• Variable speed trigger

User questions & answers

Question:	Este taladro es de los que hay que ponerle carbonos de reeplazo
Answer:	It appears that the lock button only works at full speed. I had not tried it at lower speeds before, so when I did, I found that it only engaged when the trigger was fully depressed (full speed). I'm not sure if that is how it is supposed to work, but that's how mine does. It is not an issue for me. This unt is lightweight with lots of torque....it's trigger is sensitive to speed variations, and the reverse works well too.
Question:	Does this drill have a rubber cord that remains flexible in cold weather
Answer:	I guess it would matter on what you planned on using the drill for. I assume your a person who just wants a drill to use occasionally around your house. Either drill would be a good pick for a DIY'er. If your looking for a lightweight drill and something that can manuver in tight area's I would suggest the Porter Cable. But the Skil would do a better job in certain situations because it has lower speed but probably heavier torque which would perform better in driving screws in or drilling large holes in hardwoods.with the larger chuck you would be able to use bigger bits which generally do not fit a 3/8 in. chuck. Go with the Skil , it's going to give you more options but it's not a huge professional 1/2 in drill that might be over kill on your household projects.
Question:	Is it powerful enough to sharpen a mower blade with an attached sharpening stone
Answer:	The drill does have forward and reverse, but I do believe drill bits are designed to drill in the forward motion. Their may be specialty bits that will drill in reverse, but I'm not 100% sure on that.
Question:	Can this drilling machine used for metal and concrete
Answer:	Yes. This drill has enough power to pass a bill through the House of Representatives and Senate without getting vetoed by the President.

Product description

The Black & Decker DR260C 5.5 Amp 3/8" Drill/Driver is powerful and compact, capable of handling tough tasks in tight spaces. This drill operates from 0-1,500 rpm, features a keyless chuck for quick and easy bit changes, along with variable speed for controlled drilling and driving. The on-board bit storage allows for quick access to screwdriving bits. This drill is perfect for drilling holes in wood, metal and plastic, and driving screws to fasten a variety of material. Includes: DR260 Drill/Driver, Double-Ended Screwdriving Bit.

• Powerful and Compact to get the job done
• Variable Speed for control during drilling/driving
• On Board Bit Storage for convenience
• Chuck Size: 3/8 in; Included Components: DR260 Drill/Driver, Double-Ended Screwdriving Bit

User questions & answers

Question:	Does this drill have an electric brake? When you let go of the trigger,does the bit stop spinning immediately
Answer:	No, it doesn't, it will continue to spin after you let go of the trigger. At least when you just hold it in the air. In practice when you're drilling something in, I haven't found it to keep going, even with small screws.
Question:	I have to drill some screws into mdf. There are no pre-drilled holes. Is this what I want
Answer:	This drill has no clutch so unless you are pretty familiar with these drills it has the potential to get away from you when the screw bottoms out.
Question:	is this drill powerful enough to attach the 'power cone' attachment for polishing the chrome wheels on my car
Answer:	I'm not sure how much power your device requires but I've found this drill to be very powerful for all my normal drilling operations.
Question:	I cannot insert the drill bit - My chuck is too tight and I cannot get it to open. I have followed the instructions in the manual. Help
Answer:	At first I had the same problem, and after spraying a little WD-40 between the chuck and the ribbed area it opened immediately. Like magic! Hope this helps anybody with this problem.

Product description

A powerful 6-amp motor makes this corded drill ideal for a range of household tasks. A compact design of the corded electric drill fits in tight spaces, and variable speed allows controlled drilling and driving.

• This electric drill is powerful and compact to get the job done
• Variable speed on the corded drill is designed for control during drilling/driving
• Corded power drill has on board bit storage for convenience

User questions & answers

Question:	Is there a bag or recommended carrying case
Answer:	The recommended bag is part # 90533670.
Question:	Can you control speed in driver mood
Answer:	Yes, our 6 Amp 3/8 in. Drill/Driver features Variable Speed for Controlled drilling/driving (variable speed trigger).
Question:	What type of drill bits does it take
Answer:	Standard round drill bits. Has twist type chuck on it.
Question:	what are the rpms
Answer:	From the product description... "This drill operates from 0-1,500 rpm"

Product description

Designed for high-performance job sites, the PORTER-CABLE PC600D 3/8-inch variable speed drill provides reliable power and durability for projects requiring extended tool usage. With a high-output, 6.0 amp motor capable of 0 to 2, 500 revolutions-per-minute (RPM), the PC600D 3/8-inch drill is designed to provide the speed needed for a variety of drilling applications. The high-torque gear design makes the drill ideal for metal and wood fabrication, pilot hole drilling in deck building or frame construction, and other applications requiring the extended run-time of a corded drill.

From the Manufacturer

Variable speed drill is powered by 6.0-Amp motor, which delivers power in demanding applications. Keyless 3/8" chuck allows fast and easy bit changes and its variable-speed trigger provides 0-2500 RPM, providing results in various drilling and driving uses.

• 6.5-Amp motor delivers power in demanding applications
• Keyless 3/8-inch chuck provides fast and easy bit changes
• 0-2500 RPM variable speed trigger provides the best results for drilling and driving
• Lock-on button provides easier control during prolonged use

User questions & answers

Question:	Does the lock on button hold at variable speeds or only at full speed? Thanks for your time
Answer:	I’m not sure about the torque rating but I can tell you I put down a 12 x 12 deck with 3/1/2” Screws with no problem
Question:	Which one do i buy - this one or skil 6335-01 7 amp 1/2-inch drill (provided both have the same price
Answer:	Hi PPaine! This drill features a 1/2 inch keyed chuck. Thanks for your question!
Question:	Can it drill in reverse
Answer:	Thank you for the question! When you release the trigger the drill may continue to rotate momentarily as it comes to a stop.
Question:	would this drill have enough power to drill through glass with the correct bit of course
Answer:	Hi Nit! This variable speed drill offers up to 950 rpm. Thanks for the excellent question!

Product features

PORTER-CABLE Corded Drill

What makes the Drill stand out and gives it the power that it runs on is the high performing Motor that delivers 283 Units Watt out. To sustain the performance every machine needs a power -packed battery and in this case, the drill has within a 20V MAX Lithium ion batteries with 1.3 amp/hour cells.

Fast Bit change feature

The drill has a ½” chuck on it that is keyless which means it will save the additional effort of changing the bit with the help of a key.

Easy to work with in confined spaces

The PORTER-CABLE PCC601LB Lithium Ion Drill is small in size and light weight that is 8.25” long and 3.5lbs respectively. Adding to the ease of usage, the drill has an LED light to help use it in dark spaces.

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

Metabo HPT's new Corded Drill - D10VH2 is vastly improved over previous models featuring an all-metal keyless chuck for higher durability and better bit holding capability. Equipped with a higher amp motor to improve efficiency, and an added belt hook for convenience, the D10VH2 is the perfect tool for light drilling jobs in metal and wood. Its rubber over-molded handle adds comfort and improves control. The variable speed dial with lock-on is convenient for adapting to the task at hand, and reduces fatigue during continuous use applications. An easy to access forward and reverse button makes backing out a bit quick and easy, and can be operated with one hand. The new D10VH2 is the perfect addition to any tool box.

• POWER: Powerful 7 amp motor to power through the toughest jobs
• TORQUE: 117.7-In-lbs of max torque
• LIGHTWEIGHT: Only 3.3 lbs for greater ease of use and less fatigue
• TRIGGER: Variable speed trigger with dial for precise operation
• CHUCK: All metal 3/8 In. keyless chuck for greater durability and better bit holding ability
• BELT HOOK: Belt hook for convenient storage between job locations
• COMPACT BODY: Designed to fit in tight spaces
• WARRANTY: 5-Year base warranty

User questions & answers

Question:	Is it light enough for a small woman to use
Answer:	Yes. My wife is able to use mine.
Question:	So the Hitachi is a rebrand of this, or is this a rebrand of Hitachi
Answer:	This is the same product only with a new brand name. Hitachi rebranded its product line to Metabo HPT. I think HPT stands for Hitachi Power Tools. They kept the model number for them exactly the same. Hope this helps.
Question:	will this drive screws and if so up 2 what length of screws
Answer:	This drill has the torque (133.7 in-lbs) and speed (no load: 2700 RPM) to drive screws. It all depends on the length, type and application.
Question:	where is made from
Answer:	It is made in Spain.

• 🎁【❤ The Best Gift 2020】🎁
• ▲【 POWERFUL 6AMP MOTOR】710W 6Amp Powerful motor drives the hammer drill to a high speed of 2800RPM; Come with rich accessories, ideal for installing chandelier, procesandoing furniture, wall, door, and other DIY job for the metal, glass, stone and wood, which means that most of your needs can be met
• ▲【 HAMMER & DRILL 2 FUNCTIONS IN 1】With a dual-mode selector, just switch it to easily convert drill and hammer drill function, hammer drill function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts; The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic
• ▲【 VARIABLE SPEED TRIGGER & FORWARD AND REVERSE SWITCH】Comes with a variable speed trigger(0-2800 RPM), this hammer drill allows you to set any speed of your choice, which responds to the amount of pressure you apply, offers a greater degree of speed control. Forward and reverse function can be easily switch according to your tasks, such as complete the job of tightening or loosening screws
• ▲【 360° ROTATING AUXILIARY HANDLE & METAL KEYED CHUCK】With the adjustable anti-skid auxiliary design, the rotating auxiliary handle adds flexibility and offers a better grip, convenient for operation at any angle. The metal chuck achieves more precise control, it's keyed design is much safer than normal chucks where the drill bit can slip in some cases, and it is suitable for drill bits with diameter (≤1/2 inch) to meet your various requirements
• ▲【 10 DRILL BITS SET】10Pcs different sizes, different materials drill bits make this electric drill set an ideal tool for different kinds of applications and you can choose one for yourself accordingly, such as drilling into wood, metal, plastic, masonry and concrete

Product features

TACKLIFE 1/2-Inch(13mm) 6AMP/2800RPM Corded Dual Hammer Drill for Dry Wall, Wood, Stone, Steel with 10Pcs Drill Bits, Depth Gauge, Handle - PID01A

TACKLIFE 1/2-inch hammer drill features a pure copper motor of 6Amp, offering strong power to the drilling work, rotating speed can be up to 2800RMP, 12 dials variable speed knob and trigger allow you to choose the exact speed for different tasks. With a metal chuck, it is easy to change drill bits within a diameter of 1/2 inch(13 mm). The compact body, weighs only 5.5lbs, makes it an ideal drill for different working scenes.

Hammer & Drill 2 Functions in 1

• Before starting drilling, choose the hammer or drill function by switching the button on the top of the machine.
• The Hammer function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts.
• The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic.

PLEASE NOTE:

This hammer drill can't be used in reinforced concrete walls.

Variable-speed Trigger and Knob & Forward and Reverse Button

• The speed knob with 12-levels speed dial, which allows you to set a maximum speed before drilling.
• The variable-speed trigger allows you to change the speed for different applications.
• The lock-on button keeps one speed permanently to free your finger for long hours working.
• Forward & Reverse switch provides more convenience to tighten and loosen screws.
• The metal chuck achieves more precise control, it's keyed design provides greater grip of the drill bit and prevents the drill bit from falling off during work

Practical 10 Drill Bits Set

5 Twist drill bits for steel plate and wool(mm) : 4/5/6/7/8

5 Drills bits for brick(mm) : 4/5/6/7/8

Scaled Depth Gauge

The detachable depth rod allows you to determine exactly how deep the bit should go to meet the individual requirements of the task.

Rotatable Side Handle

360° rotatable side handle enables you to choose the best grip for your drilling work. Without any tools, the handle can be quickly installed and removed.

Product description

For diy work around the house or as a quick replacement for your more rugged tools on the professional jobsite, you can’t go wrong with Ryobi. For driving fasteners and boring holes near an outlet in your workshop, the D43K is one of the top tools for the job. It puts out up to 1,600 RPM, drawing only 5.5 amps of power. This speed is affected by the variable speed trigger. This feature gives you control of the drill’s power right at your fingertips, letting you switch from hole boring to light fastener driving with ease. Take that with the drill lock-on button, and you’ll be able to hold the drill as you like for optimal control. Even more accuracy can be had with the easy grip afforded to you with the rubber overmold. This molding increases the friction between the tool and your hand, enabling greater control in slippery condition. Whether you’re a diy specialist or professional contractor, you’ll find some use for Ryobi in your tool kit and beyond.

• GRIPZONE OVERMOLD: The pistol grip of this drill has a rubber molding on it that allows for improved handling in slippery conditions
• VARIABLE SPEED TRIGGER: You can adjust the speed of the drill to suit your job just by pulling the trigger harder. This allows you to switch from drilling holes to driving small fasteners in a pinch
• FAST BIT CHANGES: The 3/8" keyless chuck allows you to make fast bit changes without any extra tools necessary
• LOCK ON FEATURE: There is a switch on the side of the tool that lets you continuously drill without having to hold the trigger. This prevents fatigue and allows for different holding options for greater stability
• BAG INCLUDED: A tool bag is included in this kit, letting you store your drill and other accessories like bits or fasteners (Not Included)

User questions & answers

Question:	Is this drill reversible
Answer:	Have no clue right now because I just moved to Spokane Washington and it's in storage. But I built a fence and it was driving screws though a 4×4 with no problem for over a hour without a charge.
Question:	Does this come with its own "screwdriver" pieces? Wondering if I'd need to buy them separately
Answer:	No the brushes are not replaceable, it uses a modular non-serviceable motor. Fortunately that motor is inexpensive, a brief web search found it around $14 but would take 15 minutes more time to replace, but it may be many years before it needs replaced unless used regularly in a contractor trade. Frankly at that point in time I would just replace the whole tool since these are not expensive as bare tools. Usually on Ryobi's site when you look up a tool # like P208, you will find a link to a parts diagram PDF on a green "Manuals" tab. In this case if you examine the parts diagram for P208, you will find brushes are not listed as a separate part # because they are not replaceable. You can also see the motor part # on that diagram and use it to do a web picture search to see pics of the motor and see they are not brush replaceable. Generally speaking most if not all of Ryobi's brushed motors do not have replaceable brushes. There may be exceptions on their larger (motor) tools. Soon this issue will be at an end for new buyers because slowly Ryobi is moving their whole lineup to brushless, except some multi-tool kits aimed at lowest price possible.
Question:	Can this drill use on concert, example bricks
Answer:	Yes. You can flip it upside down or use it with your non-dominant hand. Feel free to use the button to reverse the drill bit spin as well!
Question:	Will the power cord be switched out with a Ryobi variable saw
Answer:	You can drill and drive screws with this...

• CORDED POWER DRILL: Our 3/8 inch corded hand drill is useful for drilling holes, driving screws, and loosening or tightening various materials together with fasteners and other applications; Small electric drill fits into tight spaces
• CONVENIENT FEATURES: This electric drill comes with a 3/8 inch keyless drill chuck for easy accessory changes; Handheld drill has a forward/reverse switch, allowing for one-hand operation; Small power drill has a belt hanger for safe storage
• POWERFUL MOTOR: These power drill drivers feature a 4.0 amp variable speed motor that can handle even the toughest jobs; Corded drill 3/8 inch variable speed trigger allows for easy and convenient precision and speed control
• COMFORTABLE DESIGN: Our corded electric drill has a compact ergonomic design with a rubber over-mold grip for more comfort and less user fatigue; Lightweight screwdriver drill is ideal for overhead work, better control, and improved overall work
• PRODUCT SPECIFICATIONS: Motor: 4 Amp, 120V, 60Hz; Variable Speed: 0-3,000 RPM (No-load); Chuck: 3/8 Inch Keyless; Max. Drilling Capacity: 1 Inch (Wood) and 3/8 Inch (Metal); Trigger Lock; Forward/Reverse Rocker Switch; 6 Ft. Cord; Weight: 3.5 Lbs.

User questions & answers

Question:

Does it has a variable speed trigger

Answer:

This meter has been upgraded a lot compared to Uni-T 210D 1. This meter has higher precision than Uni-T 210D (6000 counts vs 2000 counts), especially measure current with clamp, for example, when measure current approximately 2.5A, this meter display 2.493A, Uni-T 210D only display 2.49A 2. This meter added many functions: Live wire check, Low Impedance voltage test, measure microamps μA by terminals, etc. 3. This meter has many upgraded designs: Side probe holder design for easy test, Back clip design make it more portable, etc.

Product description

The Genesis GD38B 3/8" VSR Electric Drill has a powerful 4. 2 Amp Motor and 0-3000 RPM Variable Speed give you plenty of power and versatility and a Lock-On button and belt-clip are included for convenience.

• 3/8 in. (10mm) Keyless Chuck for Quick Bit Changes
• Powerful 4. 2 Amp Motor for All-Purpose Drilling and Driving | Reach for Genesis Power Tools for your next DIY project!
• Variable Speed (0-3000 RPM) and Reversible Motor for Versatility | Choose the perfect speed for starting screws or drilling applications!
• Lock-on Button for Extended Use | Prevent Fatigue during your DIY project!
• Rubberized Non-slip Grip with Belt-Clip
• 2 Year
• Power source type: Corded Electric
• Voltage: 120 volts

User questions & answers

Question:	Collar diameter
Answer:	I use a black and decker drill to do this and it works great. I bought a 1-1/2" x 18" auger bit from amazon years ago and I can set umbrella up in less than 20 seconds with no effort at all. about 6 years ago we were at OBX and I seen a girl who rents umbrella's do this. she would walk along beach and drill about 10 holes approx 8-10 feet apart and then drop the umbrells's into holes. Worked perfect and looked so easy and now thats what we do. In fact, the rest our family uses my drill for same purpose instead of struggling, and the umbrella is more stable if the wind picks up.
Question:	Where is it made? China
Answer:	this unit is waterproof.
Question:	Could this drill a hole in to dry wall so I can install curtains
Answer:	I don’t know why the AAPW160 wouldn’t do what you want.
Question:	Can I use it to drill a hole in concrete? Is it reversible? Please help, thank you
Answer:	contact the manufacturer