12 best dewalt corded drills

Product description

The DW130V 1/2-inch Spade Handle Corded Power Drill features variable speed reversible switch to reduce air bubbles when mixing mud. 120V motor of the corded electric drill delivers 0-550 rpm to increase torque for drilling and mud mixing. Lightweight and comfortable grip to minimize downtime.

From the Manufacturer

DEWALT DW130V Heavy-Duty 9 Amp 1/2-Inch Drill with Spade Handle

• Variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling
• 0 - 550 RPM provides increased torque for drilling and mud mixing
• 9 Amp, 120V motor provides enough power for any job site application
• 7.5 lbs. (3.4 kg) increases user productivity and decreases user fatigue
• Soft grip handle provides superior comfort and ergonomics

User questions & answers

Question:	Can DW130V work with 220 voltage supply
Answer:	(sigh!) No, it is strictly 110 volts AC. l wish it were able to travel!
Question:	How would this handle mixing a 5 gallon bucket of rapid set concrete
Answer:	This item states- LED light effectively illuminates dark work spaces. Have a great day.
Question:	How loud is this drill compared to high rpm power drill
Answer:	Yes it's the same we have several at our shop.
Question:	On DS4012, with low speed, Do i have to be careful and have it less time running because of reduced self ventilation
Answer:	It lights up the work area quite well. Better than the previous model with the light below the chuck, but not as good as the dewalt with several lights around the chuck. It does cast a shadow upwards but I have not found it to be a problem.

Product description

Delivers increased drilling performance and increased overload protection for added durability. 0-1250 RPM (revolutions per minute), variable speed reversing switch for increased versatility. 980 UWO (unit watts out). 1/2" Keyed chuck for greater bit retention. 360 deg (Degree) locking side handle for greater control and versatility. Anti-slip Soft grip handle and two-finger trigger for increased comfort. Metal gear housing for jobsite durability and increased reliability. 4.9 lb. (Pound). 3 year limited warranty. This product is manufactured in Mexico. This product meets customer requirement.

Versatile and easy to handle, the DEWALT DWD210G 1/2-Inch VSR Pistol-Grip Drill delivers the power you need for all your jobsite drilling and fastening needs. The DWD210G features variable-speed control, a convenient reversing switch, a comfortable pistol grip, and an auxiliary handle.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 10 amp motor, the DEWALT 1/2-Inch VSR Pistol-Grip Drill is capable of delivering speeds of 0 to 1,200 rpm. This translates to quick, versatile drilling and driving.

At the heart of this drill's performance is a patented DEWALT-built motor that generates 50 percent more power than a standard motor of the same size. It also provides increased overload protection for extended tool life.

Designed for Versatility and Durability

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD210G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A locking, 360-degree, soft-grip side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 4.9 pounds, decreasing user fatigue after extended use.

The DWD210G 1/2-Inch VSR Pistol-Grip Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD210G 1/2-Inch VSR Pistol Grip Drill, 360-degree locking side handle with soft grip, and chuck key with holder.

From the Manufacturer

Pistol grip 1/2-Inch variable speed with reverse drill 10.0-Amp motor delivers increased performance 0-1200 RPM, variable-speed reversing switch for versatility. Soft grip handle and two-finger trigger provides comfort. Metal gear housing for jobsite durability and reliability.360-Degree locking side handle. Generates more power with improved overload protection for added durability.

• Country of Origin:Mexico
• Package length:11.0"
• Package width:14.0"
• Package height:4.0"

User questions & answers

Question:	Will this drill be able to bore out 1 1/4" holes in 4x4 studs
Answer:	No. There is no trigger lock on this otherwise excellent drill.
Question:	Any masonary bit included
Answer:	Yes and very easy to switch between forward and reverse. We have really put this drill to work and are very happy with its performance.
Question:	Has anyone found a good case for this drill
Answer:	Most electric (mains powered/cord) drills make terrible screwguns and this drill is no exception. The issue is torque, which is not effected much by the speed of an electric motor. Electric motors deliver almost 100% of their available torque immediately upon being energized and will produce that same amount of torque throughout their speed range (that's why freight trains, in the US, are driven by electric motors. The engines you hear are diesel electric generators which power the electric traction motors that make the train go. Without that instantly available torque the train would never move). All electric motors deliver torque like this. It has nothing to do with a brand. That instantly available torque is also what makes mains powered drills tear up screw heads, break screws, shred driver bits and cam out of the screw head to put the distinctive track marks on walls and furniture. It's also what makes mains powered drills perfect for drilling holes, which is precisely what they're designed to do. Since you can't do anything practical to change the way electric motors work the solution is to design the screwgun around a motor with less torque and lower power requirements. It doesn't take much torque to drive a screw (next to none if properly sized pilot holes have been drilled) and useful levels of screwdriving torque can easily, and conveniently, be provided by 18v-24v which can be had in a small rechargeable battery. Unless you're doing a LOT of 1/4"+ diameter hole making buy an inexpensive mains powered drill and spend the extra money on a nice cordless driver/drill and batteries. You'll get a lot more mileage for your money that way.
Question:	Why is speed described as 0-1200 RPM and review says it starts at either 250 or 600 RPM? I need something with true variable speed
Answer:	Stability is better with the mid grip over the pistol grip in the sense that your hand is closer to the target rather than behind the whole drill. It has better control and is easier to keep on the head of a screw or what have you. :)

Product features

DWD210G

The DWD210G 1/2" (13mm) VSR Pistol Grip Drill has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.

Special Features

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Product description

Versatile and easy to handle, the DEWALT DWD115K 3/8-inch VSR mid-handle drill kit with keyless chuck delivers the power you need in a light-duty drill for all your drilling and fastening projects. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable mid-handle grip so you can work smarter for longer.

3/8-Inch VSR Mid-Handle Drill Kit with Keyless Chuck At a Glance: Reliable 8-amp motor Variable-speed control from 0 to 2,500 RPM Soft, non-slip rubber grip and lightweight design Three-year limited warranty, one-year free service, 90-day money-back guarantee

The VSR mid-handle drill is ideal for a wide range of drilling and fastening applications. View larger.

Mid-handle grip

Patented DEWALT-Built Motor with Overload Protection

With its powerful 8-amp motor, the DEWALT DWD115K 3/8-inch VSR mid-handle drill is capable of delivering speeds of 0 to 2,500 RPM. This translates to quick, versatile drilling and driving.

Designed for Versatility and Durability

The dependable DWD115K is versatile enough for common around-the-home tasks and light, job-site work. The reversible drill features a 1-inch capacity when working in wood with a spade bit, and it can handle a capacity of 1-1/8 inches when used in wood with a hole saw. When used in steel with a twist bit, the drill can handle a capacity of 3/8-inch.

Its 3/8-inch ratcheting keyless chuck tightens as you work to deliver greater bit retention, and the drill's ball-bearing construction provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD115K is built to allow ergonomic hand positioning, and its soft grip and well-balanced design offer improved user comfort and better overall command of the drill. It also weighs an easy-to-manage 4.1 pounds, decreasing user fatigue after extended use.

The 3/8-inch VSR mid-handle drill kit with keyless chuck comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

One DEWALT DWD115K 3/8-inch VSR mid-handle drill and kit box.

The DEWALT VSR mid-handle drill comes with a durable kit box for safe keeping.

• 8-amp motor delivers high performance in heavy-duty applications
• 3/8-inch all-metal ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM VSR trigger for versatility in drilling and fastening applications
• Mid-handle grip design with soft grip provides increased balance and comfort
• All ball-bearing construction provides greater durability and longer tool life

User questions & answers

Question:	Is there a lock on the trigger to keep the drill in the "on" position
Answer:	No, it doesn't, it will continue to spin after you let go of the trigger. At least when you just hold it in the air. In practice when you're drilling something in, I haven't found it to keep going, even with small screws.
Question:	Is it reversible drill
Answer:	This drill has no clutch so unless you are pretty familiar with these drills it has the potential to get away from you when the screw bottoms out.
Question:	I don't understand the comments saying this drill is useless as a screwdriver. Anyone else agree that this drives screws as easily as cordless drills
Answer:	I'm not sure how much power your device requires but I've found this drill to be very powerful for all my normal drilling operations.
Question:	What is the advantage of a mid handle grip rather than a pistol grip? I am a woman with average strength, inexperienced at DIY but want to learn
Answer:	At first I had the same problem, and after spraying a little WD-40 between the chuck and the ribbed area it opened immediately. Like magic! Hope this helps anybody with this problem.
Question:	Does this drill have an electric brake? When you let go of the trigger,does the bit stop spinning immediately
Answer:	Castor oil is a humectant, it does remove moisture from one place and transfers it to another. Its not a good thing to use in a dry climate. If you insist on using it, Its best to use at night before bed and wash off in the morning.
Question:	I have to drill some screws into mdf. There are no pre-drilled holes. Is this what I want
Answer:	It says that it is made in the USA
Question:	is this drill powerful enough to attach the 'power cone' attachment for polishing the chrome wheels on my car
Answer:	I would send a note to the seller to ask. The bars I got came with one white, one brown, and a nice silicone soap dish. The only difference in ingredients in the brown bar is that it contains olive particulates which make it more textured, for scrubbing. Both have olive oil. To me, they feel the same, smell the same, and have had the same effects on my skin. Love their products!
Question:	I cannot insert the drill bit - My chuck is too tight and I cannot get it to open. I have followed the instructions in the manual. Help
Answer:	The butter cream comes in a plastic, vacuum sealed container and their oil (same ingredients) comes in a dark amber glass container.

Product features

Highly Efficient Motor

The DWD115K Drill powers through tough jobs like a pro with ease, all thanks to the powerful 8 Amp motor that delivers 0-2,500 rpm speed, even for heavy-duty applications. . The unique feature of this drill in particular is the 3/8" all-metal, ratcheting, keyless chuck that makes a better bit retention possible.

Specially designed Mid-Handle Grip

Having is a solid grip on power tools and ease of handling is as important as a powerful performance. This Corded Drill from Dewalt, is designed with keeping ease of usage and handling in mind. The grip of the handle is placed in the middle to give the user increased balanced and control and the soft grip ensures comfort.

Durable

The drill is strategically designed with an all ball bearing construction that makes it durable. The Drill comes in a carrying case to keep it safe while carrying it outside.

Product description

Versatile and easy to handle, the DEWALT DWD110K 3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck delivers the power you need in a light-duty drill for all your drilling and fastening needs. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable pistol grip, so you can work smarter, longer.

3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck At a Glance: Reliable, 7 amp motor Variable-speed control from 0 to 2,500 rpm Soft, non-slip rubber grip and lightweight design Three-year limited warranty, one-year free service, 90-day money-back guarantee

A lightweight, versatile tool for all of your drilling and fastening needs. View larger.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 7 amp motor, the DEWALT DWD110K 3/8-Inch VSR Pistol-Grip Drill is capable of delivering speeds of 0 to 2,500 rpm. This translates to quick, versatile drilling and driving.

Mid-Handle Grip

Designed for Flexibility and Durability

The DWD110K is flexible enough for common jobsite tasks. The drill's 3/8-inch ratcheting keyless chuck tightens as you work to deliver greater bit retention, and the ball-bearing construction provides added durability. The reversible drill features a 1-inch maximum capacity when working in wood with a spade bit, and it can handle a capacity of 1-1/8 inches when used in wood with a hole saw. When used in steel with a twist bit, the drill can handle a capacity of 3/8 inch.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD110K is built to allow ergonomic hand positioning, and its soft grip and well-balanced design offer improved user comfort and better overall command of the drill. In addition, it weighs an easy-to-manage 4.1 pounds, decreasing user fatigue after extended use.

The 3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD110K 3/8-Inch VSR Pistol-Grip Drill and kit bag.

The DEWALT VSR Pistol-Grip Drill comes with a durable kit bag for safe keeping.

• 8.0 Amp motor delivers high performance in heavy-duty applications
• 3/8-inch ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM, vsr trigger for versatility in drilling and fastening applications
• Soft grip handle design offers increased gripping surface and comfort
• All ball-bearing construction provides greater durability and longer tool life;

User questions & answers

Question:	Is the dwd110 also compatible to use with 220v
Answer:	The depth gauge, belt clip, and handle are included. There is no charger or battery included. The "Z" in the model name indicates that this is the tool only, get a non-Z if you also want a battery and charger.
Question:	Does anyone know the difference between this and the all metal chuck keyless drill (other than chuck made in metal
Answer:	Yes however, it would be overkill. This drill has a lot of torque.
Question:	how long is the cord
Answer:	115
Question:	Where is this drill made
Answer:	No. Buy the XT257 case

Product description

The DEWALT DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck features a powerful 7.0 amp motor which gives the user the power to get the job done! It has a compact pistol grip design that allows for user comfort with a light weight design decreases user fatigue. The user-friendly lock-on switch reduces user fatigue allowing for extended usage. This drill also has a variable speed trigger switch which gives the user greater versatility. This unit also includes a chuck key. Lock-On switch reduces fatigue

• The product is 3/8", Heavy Duty, VSR Drill
• Easy to use
• The product is manufactured in China
• A powerful 7.0 Amp motor
• Compact and Lightweight design
• Variable speed trigger

User questions & answers

Question:	Este taladro es de los que hay que ponerle carbonos de reeplazo
Answer:	It appears that the lock button only works at full speed. I had not tried it at lower speeds before, so when I did, I found that it only engaged when the trigger was fully depressed (full speed). I'm not sure if that is how it is supposed to work, but that's how mine does. It is not an issue for me. This unt is lightweight with lots of torque....it's trigger is sensitive to speed variations, and the reverse works well too.
Question:	Does this drill have a rubber cord that remains flexible in cold weather
Answer:	I guess it would matter on what you planned on using the drill for. I assume your a person who just wants a drill to use occasionally around your house. Either drill would be a good pick for a DIY'er. If your looking for a lightweight drill and something that can manuver in tight area's I would suggest the Porter Cable. But the Skil would do a better job in certain situations because it has lower speed but probably heavier torque which would perform better in driving screws in or drilling large holes in hardwoods.with the larger chuck you would be able to use bigger bits which generally do not fit a 3/8 in. chuck. Go with the Skil , it's going to give you more options but it's not a huge professional 1/2 in drill that might be over kill on your household projects.
Question:	Is it powerful enough to sharpen a mower blade with an attached sharpening stone
Answer:	The drill does have forward and reverse, but I do believe drill bits are designed to drill in the forward motion. Their may be specialty bits that will drill in reverse, but I'm not 100% sure on that.
Question:	Can this drilling machine used for metal and concrete
Answer:	Yes. This drill has enough power to pass a bill through the House of Representatives and Senate without getting vetoed by the President.

Product description

The DEWALT DWD520 1/2-Inch VSR Pistol Grip Hammerdrill featuers a 10.0 Amp motor which delivers increased drilling performance. This patented DEWALT built motor design generates 50% more power with increased overload protection for added durability. This is a dual mode unit : hammerdrill / drill for versatility in masonry, wood, or steel drilling applications. 2-Speed range for high speed drilling or high torque applications. The soft grip handle and two-finger trigger allow for increased comfort and greater control. The metal gear housing offers jobsite durability and increased reliability. A 360° locking side handle with soft grip allows for greater control and versatility. Applications include: Ideal for installation and removal of Tapcon®/Tapper™ concrete screw anchors / Optimal drilling applications in concrete from 3/16” to 3/8” / Maximum drilling applications in concrete up to ½” / Drilling applications in wood up to 1-1/2” / Drilling applications in steel up to ½”. Includes a 360° locking side handle, Steel depth rod, and Chuck key with holder.

• 10.0 Amp motor delivers increased drilling performance
• Patented DEWALT built motor design generates 50 percent more power with increased overload protection for added durability
• Dual mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
• 2-Speed range for high speed drilling or high torque applications
• Soft grip handle and two-finger trigger for increased comfort and greater control. Metal gear housing for jobsite durability and increased reliability

User questions & answers

Question:	where is the dwd520 made
Answer:	The one I have was made in Mexico...
Question:	largest width for drill bit
Answer:	1/2 "
Question:	Can it be used with a core drill ? The first job for it will be to put a 2 1/2" hole thru 3 1/2 " red brick and the 8" block behind it
Answer:	I have also only used masonry bits and it works great. I don't think this the correct tool for core drilling. Check with Dewalt or google core drilling.
Question:	What are the bpms for this tool
Answer:	0-56,000 BPM

Product description

The DWD215G 1/2-inch VSR Mid-Handle Grip Corded Electric Drill with Keyless Chuck has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Corded power drill is constructed with soft grip handle for comfort and housed in metal gear for durability.

Versatile and easy to handle, the DEWALT DWD215G 1/2-Inch VSR Mid-Handle Grip Drill with Keyless Chuck delivers the power you need for all your home-improvement projects. The drill features a variable-speed trigger, a convenient reversing switch, a comfortable mid-handle grip, and an auxiliary handle.

1/2-Inch VSR Mid-Handle Grip Drill with Keyless Chuck At a Glance: Reliable, 10 amp DEWALT-built motor Reversible, variable-speed control from 0 to 1,200 rpm Convenient, keyless chuck holds bits securely Soft, non-slip grip and two-finger trigger for comfort and control Three-year limited warranty, one-year free service, 90-day money-back guarantee

Take on jobsite projects large and small with the VSR Mid-Handle Grip Drill. View larger.

With a speed of 1,200 rpm, this drill allows you to take on a variety of masonry, metal, and wood projects. View larger.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 10 amp motor, the DEWALT 1/2-Inch VSR Mid-Handle Grip Drill is capable of delivering speeds of 0 to 1,200 rpm. At the heart of this drill's performance is a patented DEWALT-built motor that generates 50 percent more power than a standard motor of the same size, while also providing increased overload protection for extended tool life. This translates to quick, versatile drilling and driving.

Versatility, Durability, and a Convenient Keyless Chuck

As versatile as it is powerful, the DWD215G functions well for both steel and wood applications. When working with a spade bit in wood, the drill offers a 1-1/2-inch capacity, and with an auger bit in wood, it can handle a 1-1/8-inch bit. The drill can handle a 2-9/16-self-feed bit and a 3-1/2-inch hole saw in wood. It can also handle a 1/2-inch twist bit or a 2-inch hole saw in steel.

The DWD215G's 1/2-inch, single-sleeve, ratcheting keyless chuck is all-metal for durability and features an automatic spindle lock that provides greater bit retention. Along with the convenience of tool-free bit changes, the drill features a metal gear housing for added security against wear and tear.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD215G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A 360-degree, locking, soft-grip side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 5.2 pounds, decreasing user fatigue after extended use.

The DWD215G 1/2-Inch VSR Mid-Handle Grip Drill with Keyless Chuck comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD215G 1/2-Inch VSR Mid-Handle Grip Drill with Keyless Chuck and 360-degree locking side handle with soft grip.

Reversible, variable speed VSR Drill handles 1/2-inch twist bits or a 2-inch hole saws in steel.

The 360-degree locking side handle gives you control for precise drilling applications.

From the Manufacturer

Mid handle drill, chuck size 1/2-Inch, no-load RPM 0 - 1200, gear train double. Amps at 120-Volt 10-Cord 8-Feet 3-Conductor, bearings ball and roller, drill chuck type keyless, housing metal gear housing, switch reversing variable speed, tool length 11-Inch, tool weight 5.2-Pound, includes 360-Degree side handle with soft grip, chuck key and holder.

• 10-amp motor of the electric drill delivers increased drilling performance
• Patented DEWALT-built motor design generates 50% more power with increased overload protection for added durability of the corded drill
• DEWALT corded drill has 1/2-inch all-metal, single-sleeve, ratcheting, keyless chuck with automatic spindle lock provides greater bit retention and tool-free convenience
• Mid-handle grip design with soft grip provides increased balance and comfort
• 0-1250 RPM, variable speed reversing switch for increased versatility
• 360-degree locking side handle with soft grip for greater control and versatility
• Metal-gear housing for jobsite durability and increased reliability

User questions & answers

Question:	Is the mid handle removable
Answer:	this tool is made for 110V only. sorry
Question:	Is the mid handle removable
Answer:	I use mine to mix tile mortar and grout. Concrete may be too heavy to mix unless you mix it a little wet. I wouldnt use it for concrete
Question:	where is this made
Answer:	It did not seem too loud to me, but I was using it outside to bore holes in the ground to plant bulbs. It is extremely powerful and I was able to bore the holes easily, even in a very rocky area.
Question:	does drill come with case
Answer:	None of the prior respondents understood your question. Because AC drills do not have automatic transmissions like cars do, you need to run it at full speed for maximum efficiency and cooling and minimal motor wear. Yes, you will burn up the motor if you run it for too long under reduced voltage.

Product description

The DEWALT DW246 7.8-Amp 1/2-Inch Drill is developed with a motor capable of speeds of 0 to 600 rpm, designed with a keyless chuck for increased bit durability, and 7.8 amp motor for greater capability on tough jobs. Its steel gears are heat treated in a durable helix design and protected by rugged metal covering for longer tool life. Features Jacobs keyless chuck for efficient bit replacement.

From the Manufacturer

Designed for power and greater comfort, this 1/2-inch variable-speed reversing drill turns from 0 to 600 rpm. Powered by a 7.8 amp motor with helical-cut steel, heat-treated gears, this drill will perform all your toughest applications. The longer/slimmer handle, soft grip two-fingered trigger design and 360-degree side handle provides greater control and comfort. Has a keyless chuck for fast and easy bit changes.

Features

• Helical-cut steel, heat-treated gears for increased durability and long gear life
• Metal gear housing for job site durability and increased reliability
• Rubber grip and 2-finger, rubber trigger for increased comfort and greater control
• Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience
• Triple gear reduction provides increased torque and reduces gear stress
• 360-degree side handle for greater control and versatility

Specifications

• Keyless chuck: yes
• Chuck size: 1/2 inch
• Spindle lock: yes
• No-load speed: 0 to 600 rpm
• Amps: 7.8 amps
• Max. watts out: 600 watts
• Gear reduction: triple
• Capacity in wood (spade bit): 1-1/2 inches
• Capacity in wood (self-feed): 2-9/16 inches
• Capacity in wood (hole saw): 4 inches
• Capacity in wood (auger bit): 1-1/2 inches
• Capacity in steel (twist bit): 1/2 inch
• Capacity in steel (hole saw): 2-3/4 inches
• Tool weight: 4.4 lbs.
• Shipping weight: 5.7 lbs.

Includes

• 360-degree side handle

Warranty

This DeWalt high-performance industrial tool comes with a warranty package that includes:

30-day, no-risk satisfaction guarantee

One-year free service contract

One-year warranty

• Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience
• Triple gear reduction provides increased torque and reduces gear stress
• Rubber grip and two-finger trigger for increased comfort and greater control
• Metal gear housing for jobsite durability and increased reliability
• Helical-cut steel, heat-treated steel gears for long life and durability 360 degree side handle for greater control and versatility

User questions & answers

Question:	Is this an acceptable drill for mixing thinset
Answer:	I have used it for that but would not recommend it as a dedicated mixing drill. It has an insane amount of torque but would likely burn out.
Question:	does this item have a reverse
Answer:	Yes it doeswith variable speed
Question:	Is the hammer handle removable
Answer:	Yes, the handled is removable.

Product description

The DWD220 1/2" VSR Pistol Grip Drill with E-Clutch Anti-Lock Control has a powerful 10-Amp motor with overload protection to drill/driver at 0-1250 rpm in forward or reverse. The battery drill is constructed with soft grip handle for comfort and housed in metal gear for durability.

From the Manufacturer

The DEWALT DWD220 1/2-Inch VSR Pistol Grip Drill with E-Clutch Anti-Lock Control has a 10.5 Amp motor that delivers increased drilling performance. The Patented DEWALT built motor design generates 50-percent more power with increased overload protection for added durability. E-Clutch Anti-Lock Control monitors current to the motor and shuts tool down in lock-up situations for increased control. It has a 0-1200 RPM, variable speed reversing switch for increased versatility. The soft grip handle and two-finger trigger offer increased comfort and greater control. It has metal gear housing for jobsite durability and increased reliability. Applications: Spade bit drilling applications in wood up to 1-1/2-Inch; Self-feed bit drilling applications in wood up to 2-9/16-Inch; Hole saw drilling applications in wood up to 3-5/8-Inch; Auger bit drilling applications in wood up to 1-1/2-Inch; Twist bit drilling applications in steel up to 1/2-Inch; Hole saw drilling applications in steel up to 2-Inch. Includes 360-Degree locking side handle with soft grip, and bit key holder.

• DEWALT Perform and Protect line of power drill is designed to provide a high level of control, dust containment, or low vibration without sacrificing performance
• E-Clutch System of Dewalt drill is a Perform and Protect control feature that shuts the tool off when a stall is detected to reduce reactionary torque in bind-up situations.
• 10.5 Amp motor of cordless power drill delivers increased drilling performance.
• Includes 0-1200 RPM variable speed reversing switch for increased versatility.
• Patented DEWALT-built motor design generates 50% more power with increased overload protection for added durability
• Soft grip handle and two-finger trigger for increased comfort and greater control.
• Metal-gear housing for jobsite durability and increased reliability.

User questions & answers

Question:	How heavy is it
Answer:	Yes, the handle is removable.
Question:	rpm
Answer:	> The mid-handle is NOT removable. The mid-handle is integrated into the plastic molding that makes up the majority of the tool's housing. The tool is called a "mid-handle" drill because of the primary handle's middle location under the drill's motor. What IS REMOVABLE is the side handle (sometimes called the auxiliary handle). The side handle can be repositioned around the perimeter of the tool or simply taken off. It is surprising and unfortunate that even the manufacturer did not answer this more clearly.
Question:	Does it work in countries with electricity 220-240 volts
Answer:	It's not made in Mexico; it's made in China, like damn near everything else! It says so right in the description. Not sure which is worse though. Mexico versus China? Let's have a debate.~LOL
Question:	What Is the torque
Answer:	No, this does not include a case.

Product description

Variable speed and reversing switch, metal gear housing for jobsite durability, Made of helical cut steel, heat treated gears, two finger trigger for increased comfort. Specs: 0-850 RPM no-load speed, 600 watts maximum output power, 360 degree side handle, Double gear Reduction. Includes: chuck key with holder.

Versatile and easy to handle, the DEWALT DW235G 1/2-Inch VSR Drill delivers the power you need for all your home-improvement projects. Enjoy the drill's variable-speed control, convenient reversing switch, comfortable pistol grip, and auxiliary handle, so you can work smarter.

1/2-Inch VSR Drill At a Glance: Powerful, 7.8 amp motor Reversible, variable-speed control from 0 to 850 rpm Pistol grip with two-finger trigger for comfort and control Versatile, 360-degree side handle for easy maneuvering Three-year limited warranty, one-year free service, 90-day money-back guarantee

The VSR Drill has a powerful 7.8 amp motor, making it ideal for a wide range of tasks. View larger.

Dense copper windings help generate powerful motor rotation. View larger.

Reliable Construction and Variable-Speed Control

With its powerful 7.8 amp motor, The DEWALT 1/2-Inch VSR Drill is capable of delivering speeds of 0 to 850 rpm. This translates to quick, versatile drilling and driving. At the heart of the DW235G's long-lasting performance is a set of heat-treated, helical-cut steel gears that provide extended tool life and exceptional durability.

Designed for Versatility and Durability

As versatile as it is powerful, the DW235G functions well for both steel and wood applications. When working with a spade bit in wood, the drill offers a 1-1/2-inch capacity, and with an auger bit in wood, it can handle a 1-1/8-inch bit. The drill can handle a 2-1/8-inch self-feed bit and a 3-1/2-inch hole saw in wood. It can also handle a 1/2-inch twist bit or a 2-inch hole saw in steel.

The DW235G's keyed 1/2-inch chuck grips the bit securely to prevent slippage, and metal gear housing provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DW235G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A 360-degree side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 4.9 pounds, decreasing user fatigue after extended use.

The DWD235G 1/2-inch VSR Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD235G 1/2-Inch VSR Drill, 360-degree side handle, and chuck key with holder.

From the Manufacturer

DEWALT DW235G Heavy-Duty 7.8 Amp 1/2-Inch Drill

• Helical-cut steel, heat-treated steel gears for long life and durability
• Metal gear housing for jobsite durability and increased reliability
• Two-finger trigger for increased comfort
• 360-degree side handle for greater control and versatility
• Manufactured in the USA
• Helical-cut steel, heat-treated steel gears for long life and durability
• Metal gear housing for jobsite durability and increased reliability

User questions & answers

Question:	I am an older woman who uses a drill a few times a year for household projects and to remove screws. . Is this more drill than I need
Answer:	Yes, it is a very powerful drill. Depending on your use I would suggest a 12 volt portable drill such as a Rigid or similar. The difference is in the torque available from each type. The corded drill, even though it has a handle for better control if the bit jams could break fingers or a wrist. The battery drills are quite capable of doing most jobs around the house or farm.
Question:	Is it 220 voltage
Answer:	No, 110/120v
Question:	Is the pistol grip removable
Answer:	if you are referring to the straight item with the black handle (they call it a 360 degree side handle), then yes, it is removable. it provides an extra two-handed grip for drilling something substantial if you are referring to the yellow pistol grip, then no, it is part of the main housing and not detachable.
Question:	Does the 360 degree handle have notches that fit matching protrusions on the drill, so when you tighten the 360 degree handle drill will not spin
Answer:	Side Handle:WARNING: To reduce the risk of personal injury, ALWAYS operate the tool with the side handleproperly installed and tightened. Failure to do so may result in the side handle slipping during tooloperation and subsequent loss of control. Hold tool with both hands to maximize control.A side handle may be supplied with your drill. Side handles are included with these drills: DW235G,DW245, DW246. The side handle clamps to the front of the gear case and can be rotated 360degrees to permit right- or left-hand use.

Product description

The DEWALT DW511 1/2 in. (13mm) Single Speed VSR Corded Hammer Drill is a lightweight corded drill built for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2 in., wood 1-1/4 in., concrete optimum 5/32-3/8 in., 11-1/2 in. long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder.

Able to handle everything from wood and steel to masonry and concrete, the DEWALT DW511 1/2-Inch VSR Single-Speed Hammer drill is a versatile tool. Featuring a dependable 7.8 amp motor, variable-speed control, and a comfortable grip, this tool makes quick work of your drilling or fastening tasks.

Powerful Motor with Overload Protection

The DEWALT 1/2-Inch VSR Single-Speed Hammer Drill's durable and powerful 7.8 amp motor is capable of delivering a maximum of 650 watts. Also, it offers overload protection and a variable-speed trigger for precise hole placement and material-appropriate performance.

Versatile Dual-Mode Design

Built to make quick work of light-duty concrete and masonry applications, this tool's hammer mode allows it to bore through tough materials without damaging or burning the bit. The hammer drill's works in concrete, wood, and steel. It offers a 1/2-inch drilling capacity when working with steel, and a 1-1/4-inch capacity when working with wood, and a 5/32- to 3/8-inch capacity when working with concrete.

Comfortable, Accurate Handling

A two-finger rubber trigger makes speed control easy, while a 360-degree side handle offers hand-position options for optimum handling. An integrated depth rod provides top-down accuracy.

The hammer drill measures 11-1/2-inches long and weighs an easy-to-manage 4.3 pounds.

The DW511 1/2-Inch VSR Single-Speed Hammer Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW511 DEWALT 1/2-Inch VSR Single-Speed Hammer Drill, 360-degree side handle, depth rod, and chuck key with holder.

From the Manufacturer

DEWALT DW511 Heavy-Duty 6.7 Amp 1/2-Inch Hammer Drill

• 7.8 Amp motor provides high performance and overload protection
• Variable speed allows for precise hole placement on work surface
• Dual mode: hammerdrill/drill for wood, steel or masonry applications
• 4.3 lbs. - lightweight design for extended use and less user fatigue
• 360° side handle with depth rod offers greater control, versatility, and increased depth accuracy

User questions & answers

Question:	Does anyone know a good carrying case for this drill
Answer:	The spec sheet says 1 lb. It might be a little heavier than that, but it feels like any corded drill its size. Not too heavy and pretty comfortable in your hand.
Question:	Does this Drill come with a case or bag
Answer:	0 to 1200 rpm
Question:	What is the difference between your DW511 and DWE5010 hammer drills
Answer:	Mine does not and would not work with 220-440 volts. There would have to be a voltage reducer or adapter.
Question:	speed reversible drill having
Answer:	If you want Ft-Lb of torque, sorry, I have not tested it. You can take the published output RPM and amps and calculate it by reworking the following formulas: Torque X RPM/5250 = HP & 740W=1HP. What I know, the Dewalt DWD220 has enough torque to twist off a cobalt drill bit and wrench my arm doing so. The Dewalt DWD220 has it use like using if for a service substitute to power a piece of equipment that uses up to a 3 HP motor, for repair jogging by putting a Love-Joy coupler on a 1/2" shaft. For drilling Stainless Steel which I do a lot, the Dewalt DWD220 is too fast and can not be slowed down enough, so I use my 20V Max 1/2" drill instead, it has better speed control.

Product features

DEWALT DW511

- 8.5 amp motor provides high performance and overload protection

- Lightweight design (4.3 lbs.) for extended use and less user fatigue

- 360-degree side handle with depth rod offers greater control, versatility, and increased depth accuracy

- Dual mode: hammerdrill/drill for wood, steel, or masonry applications

- Two-finger trigger for increased comfort

- Variable speed allows for precise hole placement on work surface

Product description

1/2-inch VSR Stud and Joist Corded Electric Drill with Clutch.

• Mechanical clutch in low gear to prevent bit lock-up and provides increased gear life of the electric drill
• 11 amp, DEWALT-built motor for increased power and performance in high-torque applications of the corded drill
• DEWALT corded drill has 2 variable speed ranges (0-330 / 0-1300 rpm) to match appropriate speed to the application
• Metal-gear housing for jobsite durability and increased reliability
• Adjustable front handle and 2-position side handle provide maximum leverage and control
• 100% ball bearing construction provides durability and longer tool life

User questions & answers

Question:	What are the dimensions from tip of big connection to back of handle? Tip of big connection to back of drill (with handle rotated out of place
Answer:	The available DEWALT case is part number 395563-00.
Question:	this says 20v but then it says electric and has a cord which is it
Answer:	Neither bag or case. It does come with a really neat chuck holder.
Question:	I know there are better drills for it, but will this mix mud or concrete
Answer:	Sorry, I have had no experience with the DWE5010 hammer drill, but the DW511, by flipping a switch, can be used as a hammer drill. Hope this helps. I am happy with my DW511.
Question:	Where is is made
Answer:	Yes Master Yoda