12 best dewalt 18 drill

Product description

Expand Your 18 Volt System with Bare Tools from DEWALT. DEWALT Bare Tools offer you the convenience to choose the tools you need to get your job done. With Batteries, Chargers and Tools sold separately you can now add to your existing DEWALT 18 Volt Cordless System. The DC720 18 Volt Cordless Drill Driver features a lightweight design to minimize user fatigue and a compact size (8.2 in.) allows users to fit into tight spaces. The Dual speed range 0-500/0-1700 rpm delivers optimal performance. The Drill/Driver also features a LED work light which provides increased visibility in confined spaces.

• Lightweight design minimizes user fatigue
• Dual speed range 0-500/0-1700 rpm delivers optimal performance
• LED work light provides increased visibility in confined spaces
• Compact size (8.2 in.) allows users to fit into tight spaces
• Batteries and chargers sold separately, this tool works with these batteries (DC9096, DC9180) and chargers (DCB103, DW9117, DC9310, DC9319, DC9320, DC012)

User questions & answers

Question:	These reviews are confusing: Does it come with a battery and charger, or not? And how heavy is it? Thank you
Answer:	No
Question:	Does this drill fit the DC 9098 battery
Answer:	It may?? I am using my stand with a Hitachi 10" miter saw but it is not sliding.. It has good balance and I have not had any issues with it yet.I did have to mount a piece of plywood on the stand and the saw to the plywood but other than that it works well. Centering the saw on the stand will probably be the key with a sliding set up.
Question:	Are the batteries for the dewalt dc970 and dewalt dc720 interchangable? or are the batteries different shapes/sizes
Answer:	Yes
Question:	How many batteries came with this drill
Answer:	Yes. Put a piece of blue tape across the 2X6 where you want to cut it and cut the board right through the tape. Tape will help to insure a clean cut.
Question:	Is this drill strong enough to remove lug nuts on a vehicle
Answer:	This lightweight director chair is made in China and with sturdy aluminum frame. It is portable with side table and the designed adjustable back make your great comfort and convenient on chair.
Question:	does it come with a batter or a case
Answer:	This folding directors chair has swivel chair back. When you lean back, it can be 0-10 degrees swivel, to fit your sitting position.
Question:	Can you put bits in this in order to use it for wood screws
Answer:	18 inches
Question:	Does anyone know if amazon sells a dewalt case to fit this tool plus battery/charger
Answer:	Sure you can use this chair on the beach!

Product features

DCD950B Hammerdrill

The DCD950B 1/2" 18V Cordless Hammer drill/Drill/Driver delivers 3 speed variations allowing users to choose the level of performance needed for various applications. Powered by a high performance motor and bits are secured by heavy-duty ratcheting chuck.

Features

• High power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications.
• LED work light provides increased visibility in confined spaces
• Heavy-duty metal ratcheting chuck provides superior bit gripping strength.
• Perfect length for improved balance and better control

Product description

The DEWALT DCK940D2 20V MAX Lithium Ion 9-Tool Combo Kit contains all the tools you need for any/all projects. The DCD771 20V MAX Lithium Ion 1/2" Compact Drill Driver delivers 300 unit watts out (UWO) of power ability completing a wide range of applications. The DCF885 20V MAX Lithium Ion 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows. The DCS381 20V MAX Lithium Ion Reciprocating Saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft, and the DCS393 20V MAX Lithium Ion Circular Saw with 6-1/2" carbide blade can cut 2x4's at a 45deg angle in a single pass. The DCS355 20V MAX Lithium Ion Oscillating tool QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without wrenches. The DCL040 20V MAX Lithium Ion LED work light delivers 110 lumens of light output. The DCG412 20V MAX Lithium Ion 4-1/2" Grinder 7,000 RPM motor provides high power for cutting and grinding applications. The DCR006 20V MAX Bluetooth Jobsite Speaker allows you to stream music wirelessless from your smart phone or tablet, and finally, the DCD740 20V MAX Lithium Ion 3/8"" Right Angle Drill provides dual speed ranges (0-650/0-2000) rpm for increased user flexibility for a wide range of applications. Includes: 1) DCD771 Drill/Driver, 1) DCF885 1/4" Impact Driver, 1) DCS381 Recip Saw, 1) DCS393 Circ Saw, 1) DCS355 Oscillating Tool, 1) DCL040 LED Worklight, 1) DCG412 Grinder, 1) DCR006 Bluetooth Speaker, 1) Right Angle Drill, 2) DCB203 20v MAX XR Batteries (2.0AH), charger, 6-1/2" Saw Blade, Side Handle (DCG412), Wrench (DCG412), Universal Accessory Adapter.

• DCD771 20 volt MAX 1/2 inches drill driver and DCF885 20 volt MAX impact driver
• DCS381 20 volt MAX Lith recip saw, and DCS393 20 volt MAX Lith circular saw
• DCS355 20 volt MAX Lith oscillating tool, and DCL040 20 volt MAX Lith LED work light
• DCG412 20 volt MAX Lith 4 1/2 inches grinder, DCR006 20 volt MAX Lith Bluetooth speaker, and DCD740 20 volt MAX Lith 3/8 inches right angle drill
• Includes 2) DCB203 20 volt MAX XR batteries (2.0AH)

User questions & answers

Question:	What is in this combo pack exactly
Answer:
Question:	What size batteries are included? Can’t find the AH rating or model numbers in description
Answer:
Question:	Does these tools have brushless motors
Answer:	It wears off before noon! And it makes my face extremely oily. I have to reapply my foundation several times a day.
Question:	Does this come with the two bags pictured with it
Answer:	I don't think it firms the skin. I don't see any real difference when I use This product but everyone's skin is different. To me it's not worth the money.

Product features

20V MAX* 1/4" Impact Driver

Compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.

20V MAX* Reciprocating Saw

Features a 4-position blade clamp that allows for flush cutting and increased positional versatility with tool free blade changes.

20V MAX* Circular Saw

6-1/2" carbide blade can cut 2x4's at a 45-degree angle in a single pass.

20V MAX* XR Oscillating Multi-Tool

A single tool solution for many applications, including cutting, sanding, scraping, and mortar and grout removal. This will become your go-to solution when you need to get the job done quickly and easily.

20V MAX* Compact Drill/Driver

Lightweight design with high performance motor that delivers 300 unit watts of power out.

20V MAX* Grinder

Has an 8,000 RPM motor that provides high power for cutting and grinding applications.

Jobsite Bluetooth Speaker

Allows you to stream music wirelessly from your smartphone or tablet.

20V MAX* 3/8" Right Angle Drill/Driver

Provides dual speed ranges to increase user flexibility for a wide range of applications.

Product description

The DEWALT DCK283D2 20V MAX XR 5.0Ah Premium Cordless Hammerdrill and Impact Driver Combo Kit is a combination of the DCD996 20V MAX 1/2 inches hammer drill, with the DCF887 20V MAX 1/4 inches impact driver. The DCD996 Cordless Hammer Drill features includes 3-speed levels, high performance (0-2,000 rpm), an all-metal transmission that optimizes tool-to-task for fast application speeds and improved run-time. This hammer drill offers 0-38,250 BPM for fast drilling in masonry materials. It also has a compact size (8.4 inches front-to-back back length) and lightweight (4.7 lb) design to fit tight areas, and includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model. The DCF887 20V MAX 1/4 inches Cordless Impact driver provides 1,825 in-lbs of MAX Torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute. This impact driver also has a compact size (5.3 inches front-to-back length) and lightweight (3.4 lbs.) design. Kit includes: DCD996 20V MAX XR 3-Speed 1/2 inches Hammer drill, DCF887 20V MAX XR 1/4 inches Impact Driver, DCB205 20V MAX XR High Capacity Li-Ion Batteries (5.0 Ah), Charger, Belt Hooks, 360 degree side handle, Contractor Bag.

• Hammer Drill: DCD996 Hammer drill features includes 3-speed levels, high performance (0-2,000 rpm), an all-metal transmission
• Impact Driver: DCF887 20 volt MAX 1/4 inch impact driver provides 1,825 in-pounds of MAX Torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute
• Hammer Drill: Both units are compact and lightweight to help get into tight spots, DCD996 20 volt MAX 1/2 inch hammer drill has a compact size (8.4 inch front-to-back length) and lightweight (4.7 pounds) design to fit tight areas
• Includes: DCB205 20 volt MAX XR high capacity Li-Ion batteries (5.0 Ah)
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	where is the led light on the drill
Answer:	at the base of the handle in the front.
Question:	Is the “hammerdrill” an option or is it always in hammer mode
Answer:	The hammer feature is selected with a dial.
Question:	Why is the p2 kit $90 more than the m2? the retail price difference between 4.0 ah and 5.0 ah battery 2 packs is only
Answer:	P2 kit is identical to the M2 kit except: a) Batteries in P2 are 5AH vs 4AH in M2 b) Hard plastic case in P2 vs bag in M2. Hard plastic case hold both tools and charger. Note: 5AH batteries are exactly the same size as the 4AH batteries. 5AH batteries are 0.5oz LIGHTER than the 4AH. The 5AH are definitely the batteries to get.
Question:	Does anyone else have an issue with the drill in the dck299p2? one guy said bought three and they were all defective
Answer:	My drill Chuck has been binding up since new. But still usable for now.. The impacts Chuck broke internally and wouldn't lock the bits in and the impact lost all speeds except for fast... I bought a new impact and it sparked and smelled like burning plastic for the first 30 minutes. Works now without an issue.will see.. I'd go with another brand,I'm a contractor and have been using DeWalt for 20+ years.DeWalt seems to have gone down hill. Not buying again next time.

Product description

Designed to fit into tight spaces

From the Manufacturer

DEWALT is one the leading manufacturers of power tools in the world. The DC825 1/4-inch heavy-duty 18V impact driver provides a light weight, compact, and durable solution for a wide range of light-to-medium fastening applications. The DC825 offers exceptionally small size, just 5-3/4-inch front to back and with the battery (which is not included) weighs only 4.6 pounds. The DC825 has a durable high speed motor that delivers 0-2,400 RPM for increased productivity. The DC825 also has a frameless motor technology with replaceable brushes for easy serviceability, is compact in size but high with power, and allows for superior airflow which increases motor durability and extended life.

• Designed to fit into tight spaces
• Anti-slip comfort grip
• This product is made of high quality material
• Battery & Charger Sold Separately
• Tool only with no battery, frameless motor for extended tool durability and life
• Compact size and weight allows access into tighter areas and reduces user fatigue
• 1,330 in-lbs of torque to perform a wide range of fastening applications

User questions & answers

Question:	Can this be used for automotive work? Such as removing nuts and bolts on engine parts
Answer:	No it attaches to the table into which the saw is attached
Question:	can i use my dc9098 batteries
Answer:	I'm sorry for the confusion. This out feed table needs a Rousseau 2780 Table Saw stand to go with your tradesmen #8030b. Just to be clear the 2720 is NOT a table saw stand but an accessory to one.
Question:	do you have a 14.4 impact , bare tool
Answer:	No but this is 1 of the easier ones to fabricate
Question:	Does this work well enough as a drill that I won't need to buy a separate drill (for light and medium drilling
Answer:	Cheaper else where

Product features

DEWALT DC825B 1/4-Inch 18-Volt Cordless Impact Driver

The DEWALT DC825B 1/4-inch 18-volt cordless impact driver (bare tool) is an ideal choice for tackling a broad range of fastening applications. Its high-power frameless motor, variable-speed trigger, and ergonomic design all contribute to easy handling, while the exclusive, XRP extended run time battery system lets you work until the job at hand is complete.

What''s in the Box

Powerful, Application-Specific Performance

Offering 1,330 inch-pounds of torque, the DC825B impact driver delivers the performance you need to complete a wide range of fastening applications quickly and accurately -- from driving and removing fasteners in metal or concrete to drilling in wood and metal. It features variable-speed control from 0 to 2,400 rpm and 0 to 2,700 ipm for faster results and application-specific driving.

This impact driver is easy to control -- even at the end of a long workday -- with its comfortable, anti-slip grip and a body that is durable, lightweight, and well balanced. And its body is compact to fit easily in tight places.

Convenient, replaceable brushes allow for extended tool life, and a heavy-duty impact mechanism directs up to 1,330 inch-pounds of torque to the fastener without causing kickback--protecting you, the tool, and your work piece. A durable magnesium gear case and all-metal transmission also contribute to the DC825B''s durability.

Bare Tool

This DEWALT cordless tool does not come with a battery or charger. It''s compatible with DEWALT''s 18-volt XRP battery system, which provides up to 40 percent more run time than standard Ni-Cad batteries and can be used with any 18-volt DEWALT tool.

The DC825B comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

Made in the USA

In a commitment to build America, DEWALT, a leading manufacturer of high-quality professional power tools, is proud to expand its product offerings made in the USA using global materials to include more than 600 different cordless power tools, hand tools and accessories. DEWALT began production of its American-built cordless power tools in its 75,000-square-foot Charlotte Manufacturing Operations facility in early October of 2013, using global materials. Those same tools built prior to the opening of the factory were manufactured internationally and imported.

DEWALT cannot guarantee the tool you receive to be made in the USA, some retailers may have items that were built prior to October 2013. Only tools manufactured after October 2013 are made in the USA with global materials.

Product description

The Cordless Compact Drill / Driver and Impact Driver tools in this 20V MAX* XR Combo Kit have powerful motors of DEWALT cordless tools to deliver maximum runtime. DEWALT 20 volt tools feature a lightweight, compact design to fit in tight spaces, and the 3-mode LED gives users visibility in dark spaces.

• Brushless motor of cordless drill combo kit delivers up to 57% more runtime over brushed
• XR Lithium Ion batteries with fuel gauge in cordless tools combo kit provide 33% more capacity over standard packs
• DCD791 20V MAX* 1/2-inch Drill/Driver in the drill/ impact driver combo kit has a compact (6.9-inch front to back) and lightweight (3.4 lbs.) design to fit into tight areas
• DCF887 20V MAX* 1/4-inch Impact Driver has a compact (5.3-inch front to back) design to fit into tight areas
• DCD791 features a 3-mode LED with 20-minute trigger release delay in Spotlight Mode, providing increased visibility in dark or confined spaces
• DCF887 features 3 LEDs imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces

User questions & answers

Question:	Hello from pensacola florida my question is can this thing take off a tire if not can you point me to on that dose thanks
Answer:	I would say yes but I did not get a case with mine Or the bits but any one I get bits for the case always fits the charger and drill in
Question:	How many inch pounds will this impact driver provide
Answer:	110v, como usan en los Estados Unidos.
Question:	Does it come with 2 batteries
Answer:	Don't know about the brushes, WORX could answer that (shoot them an email)….. but let me say this: best tool I have in the shop !! I use it all the time for drilling pilot holes in sheetrock or wood, and then switch to the appropriate driver for screws or whatever. Works GREAT for up to 10 or 12-size screws and maybe 1-1/2" or 2" length. Very happy with mine in the yard, barn, garden, or shop !
Question:	Does the drill have a hammer setting
Answer:	I’m using this drill bit and it’s working fine with me https://www.amazon.com/Bosch-9-Piece-Impact-Titanium-TI9IM/dp/B01H0NV5GM/ref=mp_s_a_1_8?keywords=bosch+drill+bit+set&qid=1557410623&s=gateway&sprefix=bosch+dri&sr=8-8

Product description

The DEWALT DCF885C1 20V MAX 1/4" impact driver kit features a compact (5.55" front to back), lightweight (2.8 lbs) design which fits into tight areas. It has 3 LEDs with 20-second delay after trigger release to provide visibility without shadows. This driver offers one-handed loading with a 1/4" Hex chuck that accepts 1" bit tips. Specs: MAX Torque: 1400.0 in-lbs, no-load speed: 0-2,800, impacts/min: 0-3,200 IPM, 1/4"qr Hex drive. Backed by DEWALT 3 year limited warranty. Kit includes: DCF885 impact driver, 20V MAX battery (1.5 Ah), fast charger.

• Increased visibility: Has built in LED with 20 second delay after trigger release
• Ergonomic Design: Compact (5.55 inches front to back)and lightweight (2.8 pounds) design fits into tight areas
• 1 handed Bit Loading: Has a 1/4 inch hex chuck and accepts 1 inch bit tips.
• Reliability: Tools backed by a 3 year limited warranty. Anvil type quick release
• Includes: DCF885 impact driver, 20 volt MAX battery (1.5 Ah), and fast charger
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	What is the product reference (number) of the charger ? I need to check the specs since the description: fast charger is not helping enough
Answer:	The charger is model number DCB107
Question:	Bit size
Answer:	This driver uses the 1/4" hex shank bits, but you could buy a 1/4" hex shank drill chuck adapter like the Neiko 20754A adapter that Amazon sells, and use regular drill bits.
Question:	Can you break Lugnuts off of tires with this impact driver
Answer:	Actually, I used it on a whim to change out the tire on my wife's CR-V. She discovered she had picked up a screw while at soccer practice. I grabbed this impact, the adapter, the socket, and my 4 way and headed to the park. I was planning on breaking them loose with the 4 way and zipping them off and on with the impact. I tried the impact first on a whim. It broke loose 4 of the 5 nuts, and did a good job of seating them all when I put the spare on. I finished torquing them with the 4 way, but I barely even budged them. They would have likely been fine with just the impact. Now, this tool wouldn't stand a chance against the lug nuts on my 1 ton diesel, but neither would any of 3/8" or regular duty 1/2" impacts.
Question:	Can you take simi, and regular tires off with this impact
Answer:	It certainly IS NOT going to take semi lug nuts off. It won't take the lugs nuts of pickups or SUVs either. And while it MIGHT manage to remove an under torqued lug nut from a tiny car, it WILL NOT pull properly torqued lug nuts off of anything. This is a ONE QUARTER INCH impact driver for screws, and small nuts and bolts. To pull wheels, get at least a 1/2" impact with 300 plus FOOT POUNDS of torque (and that won't do semi's)

Product description

DEWALT DCH273P2 20v Max Brushless 1-inch SDS Rotary Hammer with Batteries features a DEWALT brushless motor for extended runtime and durability, and includes 20v Max 5.0ah batteries so there is no user downtime. It also offers Active Vibration Control which significantly reduces vibration and increases user comfort and productivity; a Perform and Protect feature from DEWALT. This rotary hammer gives 2.1 Joules impact energy which provides corded power without the cord. It also has a retractable utility hook for convenient hanging and storage. Includes: DCB205 5.0ah Batteries, DCB101 Charger, 360 Degree Side Handle, Depth Rod, Retractable Utility Hook.

• Brushless motor for extended runtime and durability
• Active Vibration Control which significantly reduces vibration
• 2.1 Joules impact energy which provides corded power without the cord
• Retractable utility hook for convenient hanging and storage
• Includes 20v Max 5.0ah batteries

User questions & answers

Question:	Are these new in box, not recon's
Answer:	It comes with the case, driver bits and the charger. You get one battery.
Question:	does it have enough power to drive a 8foot grounding rod in the ground
Answer:	It should? We have a 10" tablet it's also adjustable, we use it in our sxs and holds tight even going down the trails!
Question:	Is there enough room inside the case for a set of long drill bits? Thanks
Answer:	Yes, the 12.9 Ipad would fit the mount, but not sure of the case.
Question:	Is this a good drill for setting rock climbing bolts
Answer:	No.

Product description

The DEWALT DCD796D2 20V MAX XR Li-Ion 1/2" Compact Hammer drill Kit (2.0Ah) features a DEWALT brushless motor which delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This unit is compact (7.5" front to back), lightweight (3.6 lb.) and designed to fit into tight areas. A high speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds, with an ergonomic comfort grip handle that provides ideal balance & tool control. The metal 1/2" ratcheting chuck allows for superior bit gripping strength. This hammer drill also offers a 3-Mode LED hat provides lighting in dark or confined spaces up to 20X brighter than previous model, with an LED spotlight mode that features 20 minute shutoff function allowing for extended work time in dark or confined spaces. Kit includes: DCD796 - 20V MAX XR Li-Ion Compact Hammer drill, DCB203 - XR 2.0AH Battery Packs, Charger, Kit Box, Belt Hook.

• DEWALT brushless motor which delivers up to 57% more run time
• XR Li-Ion batteries with fuel gauge provide 33% more capacity
• Compact, lightweight design for tight spaces
• High speed transmission with 2-speed settings
• 3-Mode LED lights with a spotlight mode
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

User questions & answers

Question:	Does it come with the hard case, as seen in pictures
Answer:	Probably if the dog is a miniature. The metal was not very strong: using them on one cat, these wore out quickly.
Question:	I wonder, what is the power supply voltage of the battery charger? Or is it bivolt? And what is the frequency 50-60Hz
Answer:	yes can get new blades
Question:	how is the wobble on this drill and does the chuck come loose after drilling a few holes
Answer:	My cat has a little shredding, but he is not good about holding still.
Question:	Is this drill in hammer drill mode all the time or can it be switched between drill mode, drive mode, and hammer drill mode?? Thanks
Answer:	They have the wrong picture or the wrong description. I purchased nail clipper for my dog and that was the picture.

Product description

20V, Max, Lithium Ion Brushless Compact Drill Driver, Compact Lightweight Design, High Performance Motor Delivers 340W Out of Power, with 75 percent more runtime with Lithium Ion batteries, High Speed Transmission Delivers 2 Speeds, with No Load speed of 0 50 & 1,750 Rpm, 1/2" Single Sleeve Ratcheting Chuck, Includes: Two 20V Max Compact Lithium Ion Battery Packs, Compact Charger & Contractor Bag. Chuck Type Plastic Ratcheting

• Brushless Motor: Longer Motor life and 30 percent more runtime than brushed
• INCREASED VISIBILITY: Has built in LED with 20 second delay after trigger release
• Ergonomic Design : Compact (752 in front to back) and Lightweight (2.6 pounds) Design fits into tight areas
• COMFORT GRIP HANDLE: Provides ideal balance and tool Control
• Includes: DCD777 Compact Brushless Drill/Driver, Li ion Batteries, Charger, and Kit Bag

User questions & answers

Question:	Does this have a battery life meter on it
Answer:	It does not have a battery life meter. It does come with two batteries so it's not to big of an issue.
Question:	How long does battery last
Answer:	Batteries that come with unit are small but very light, excellent for my usage. DeWalt sells these 20v packs in 3 different capacities these are the smallest ones. How long they last is a HUGE variable based on what the task is so that will be impossible to determine for someone else. In my experience these small ones last about the same as the 18v Ni-Cad Dewalt system (18 yrs old) I replaced with this set.
Question:	Why do two Lithium ion batteries go for $170. and the kit with two batteries a charger the carry case and the drill go for
Answer:	it depends what batteries you're looking for. The batteries are where dewalt is making the real money (other than china vs us made power tools) This kit comes with 1.3AH batteries, I believe these are the smallest batteries offered. Think of them like gallons of gas. 1.3 isn't going to go as far as the 6.0AH. When dewalt adds in other stupid options like Bluetooth, it jacks up the cost. Unless you're a contractor running drills all day, these two batteries should keep your project moving along.
Question:	So is brushless better than the regular DW drill
Answer:	Yes. First off, it is more efficient than brush-ed. When you run it with a light load, it draws less power. Dewalt says you get up to 30% more runtime from the same charge. The better efficiency is a fact, and the 30% is possibly conservative. There is a youtube video of a guy drilling 1/2" holes into a board with a brushless and a traditional dewalt drill, and the brushless wins 2 to 1. it drills some 190 holes vs the brushed just 92. The second advantage: there are no brushes to wear out and replace. TBT I have many brush-ed tools and as a DIY-er I never had to replace the brushes on any of them, but this may be an advantage to a pro or heavy user. A third advantage, the tool can be built more compact, or more powerful (given the same size)The only advantage of the "brush equipped" design:that it is simpler. The brushless changes the direction of the Dc current using electronics instead of a mechanical commutator, so that is an extra source of possible failure

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD777C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

This cordless power drill/driver features a high power and high efficiency brushless motor to deliver up to 57% more runtime compared to brushed units. This drill/driver is equipped with a 3-speed transmition to help optimize speed of application and a 1/2-inch ratcheting nitro-carburized metal chuck for superior bit gripping strength. Battery and charger are sold separately.

• DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed
• 3-speed, high performance (0-2,000 RPM) all-metal transmission optimizes tool-to-task for fast application speeds and improved run time
• 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model, XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
• Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
• LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces

User questions & answers

Question:	Does anyone know the torque in inch pounds, i.e. (in lbs
Answer:	Thank you for your question. The TS1016 is designed for the 4000, 4100 and GTS1041 Reaxx saws only. The GTS1031 does not have the option for a rear outfeed or left supports. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	La batería y el cargador donde se comora y cuales son
Answer:	I cannot give you an exact weight it will support, but I can tell you that I have been ripping 12” wide oak boards that are 1 1/4” thick and the Bosch support has done well with supporting this amount of weight.
Question:	what is the difference between the
Answer:	Its not as easy, bit its still possible.. you just have to extend the arm a few inches.
Question:	what is the difference between the
Answer:	Thank you for your question. The TS1002 is 20in in length and will work with the 4000 and 4100 table saws. The TS1016 is 24" in length and will work with the 4000, 4100 and GTS1041A table saws. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

DCD991B BARE TOOL 20V MAX XR LITHIUM ION BRUSHLESS 3-SPEED DRILL/DRIVER

DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed

Powerful

The 20V MAX Drill/Driver (DCD991) features a powerful brushless motor that supplies 820 Units Watts Out (UWO) for a faster application speed.

Durable

Featuring durable nitro-carburized metal ratcheting chucks and comfortable handle grips, these tools are GUARANTEED TOUGH for durability on the jobsite and include coated and sealed switches that help to resist moisture and dust contamination.

Product description

The DEWALT DCD791D2 20V MAX XR Li-Ion 1/2" Compact Drill/Driver Kit (2.0Ah) features a DEWALT brushless motor which delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This unit is compact (6.9" front to back), and lightweight (3.4 lb.), designed to fit into tight areas. A high speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds, with an ergonomic comfort grip handle that provides ideal balance & tool control. The metal 1/2" ratcheting chuck allows for superior bit gripping strength. This drill also offers a 3-Mode LED that provides lighting in dark or confined spaces (up to 20X brighter than previous model), with a LED spotlight mode that features 20 minute shutoff function allowing for extended work time in dark or confined spaces. Kit includes: DCD791 - 20V MAX XR Li-Ion BL Compact Drill / Driver, DCB203 - XR 2.0AH Battery Packs, Charger, Kit Box, Belt Hook.

• DEWALT brushless motor which delivers up to 57% more run time
• XR Li-Ion batteries with fuel gauge provide 33% more capacity
• Compact, lightweight design for tight spaces
• High speed transmission with 2-speed settings
• 3-Mode LED lights with a spotlight mode

User questions & answers

Question:	How long does the battery take to charge
Answer:	It took me about 1-1/2 hours for each battery. The light blinks when it's done. They are great and you will like them with the 20v drill.
Question:	Do all 20v Dewalt batteries fit this tool
Answer:	Yes
Question:	On amazon, dcd791d2, the product description says "kit" (tool, batteries, charger, case), in the product details it says "bare tool". Which is it
Answer:	The "kit" as advertised on Amazon is the drill, charger, two batteries, and case. At $189.00 it is a great deal. The drill,etc. is terrific.
Question:	What is the torque rating of this drill
Answer:	Another way to figure out a torque rating of a Dewalt drill is to go to Dewalt's EU site, pick United Kingdom and look at the specs. They list both torque specs in this case. MAX is 70 nm soft is 27 nm converting to 619.55 in-lb and 238.97 in-lb. Hard torque is instant torque delivered. Usually at the start of an application; whereas, soft torque is applied throughout the application like when driving a screw.
Question:	does it come with a light
Answer:	A separate 20v utility light is available for around $15 which utilizes the same 20v L-I battery. I bought one last year and am very happy w/ it. It uses multiple led bulbs and spreads a more diffused light than the average flashlight, but I use it extensively out of doors and for low light repair projects.
Question:	Can i leave it charging over night without harming battery
Answer:	Yes you can but you should not for long periods of time.Its a simple thing every battery has a limited amount of charges that can be done.While Lithium Ion does discharge slowly they do discharge and will then waste a charge.Also the charger likely has an overcharge protector but that uses power too if not then it is always charging hence wasting more power.Your charger should take an hour with those tiny batteries add an hour charge time each mah on battery pack.
Question:	Does it come with charger and battery
Answer:	Yes, charger and battery are included. Battery is long duration, lasting multiple tasks.
Question:	Is this drill sized and weighted well for use by a woman
Answer:	I use it and I am a woman with small hands. It is not as heavy as my husband's regular drill but it is more sturdy than my previous B&D driver/drill. I prefer this one even though it is a bit wider in the grip and a tad heavier. It's my favorite gadget.

Product features

DCD791D2

The DCD791D2 20V MAX* XR Li-Ion Brushless Compact Drill / Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2 speed variations allowing users to choose the level of performance needed for various applications. Comfort grip adds balance and control.

Product description

The DEWALT DCD791B 20V MAX XR Li-Ion 1/2" Brushless Compact Drill/Driver (Tool Only) features a DEWALT brushless motor which delivers up to 57% more run time over brushed. This unit is compact (6.9" front to back), and lightweight (3.4 lb.), designed to fit into tight areas. A high speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds, with an ergonomic comfort grip handle that provides ideal balance & tool control. The metal 1/2" ratcheting chuck allows for superior bit gripping strength. This drill also offers a 3-Mode LED that provides lighting in dark or confined spaces (up to 20X brighter than previous model), with a LED Spotlight mode that features 20 minute shutoff function allowing for extended work time in dark or confined spaces. Includes belt hook. This is a bare tool item - battery sold separately.

• Dewalt Brushless Motor which delivers up to 57 percent more run time
• Compact, Lightweight Design for tight spaces
• High speed transmission with 2 speed settings
• 3 Mode LED lights with a spotlight mode
• Battery and charger sold separately
• Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
• MAX Power: 460 UWO

User questions & answers

Question:	whats does type 1 vs type 2 mean on the side of the drill
Answer:	From the Dewalt website: The type number identifies the multiple versions of a specific model number. As it relates to service parts, a type 1 can be completely different than the type 2 version of a particular model number. The type number can and usually is as important to know as the model number in order to ensure you receive the correct service part(s). Every model number can have multiple type numbers or a little as no type number.
Question:	does this drill have a hammer setting
Answer:	Nope
Question:	Will the 20 volt li-ion dewalt battery interchange with b&d 20volt li-ion batery
Answer:	DeWalt is built by Black and Decker. The old style batteries were interchangable but the new 20 volt batteries have different tabs to prevent this. They do this to prevent people from buying a $20 black and decker battery and using it on all DeWalt tools. This forces people to buy the more expensive DeWalt battery if they have DeWalt tools.
Question:	Can this go in there
Answer:	Obviously this question was posed by someone who doesn't have an a native command of the English language, so in trying to understand the question, I think the question is "Does this tool come with the battery?". That's what is meant by the question "can this go in there?". That's my guess anyway. So, to answer the question, no, it doesn't come with the battery. It's a bare tool only, so no, it won't work without you buying a battery separately.

Product features

DCD791B

The DCD791B 20V MAX* XR Li-Ion Compact Brushless Drill/Driver is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2 speed variations allowing users to choose the level of performance needed for various applications. Comfort grip adds balance and control.