12 best makita rotary hammers

Product description

The 18V LXT Lithium-Ion Brushless 1" Rotary Hammer (model XRH01Z, tool only) features a Makita BL Brushless Motor Technology for up to 50% longer run time. The XRH01Z is the industry's first 1" capacity rotary hammer in the 18V cordless category. The XRH01Z is powered by an efficient BL Brushless Motor with variable speed that delivers 0-950 RPM, 4,700 BPM, and 2.0 Joules with up to 50% longer run time than current Makita 18V LXT rotary hammers. Ease-of-use and efficiency features include 3-mode operation (rotation only, hammering with rotation and hammer only), a large 2-finger trigger for more convenience and greater comfort, and a depth adjustment guide for increased drilling depth accuracy.

• Efficient BL Brushless Motor
• Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
• The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
• Compact and ergonomic design at only 12-7/8" long
• Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue

User questions & answers

Question:	Does this kit include an SDS and 3 jaw drill chuck
Answer:	Charger and batteries and sold separately. Drill is awesome
Question:	Is there a case I can buy for this hammer drill
Answer:	It's kinda short for doing that unless you are on your knees....it's really not designed for that. it's great for drilling into masonry, brick, concrete..... i would use something like a small jackhammer type tool...and probably corded if you've got a lot of dirt to "chip."
Question:	Does it comes with the battery charger
Answer:	It is definitely 120V must be a typo
Question:	Is this model good for chipping dirt?Or should i get the longer barrel model that cost about $100 less? If its noticably more powerful i'll take this
Answer:	Taiwan. Beautiful drill but if you need an actual jack hammer. Get the max. Limited to 1 inch rotary hammer bit, and the SDS plus chisels are pititful for anything but small scale slow go chipping.

Product description

Makita’s versatile HR2475 1-inch rotary hammer (accepts SDS-Plus) delivers more efficient hitting in a compact size for faster, more productive work.

Makita's versatile HR2475 1-inch Rotary Hammer (Accepts SDS-PLUS) delivers more efficient hitting in a compact size for faster, more productive work.

7 AMP Motor Delivers 4,500 BPM

The HR2475 is powered by a 7 amp motor that delivers a no load speed of 0-1,100 rpm, with 0-4,500 BPM and 2.7 joules of impact energy. Three-mode operation includes "Rotation Only," "Hammering with Rotation," and "Hammering Only" for multiple applications.

Makita Motor Advantage

Consistent with the rest of Makita's rotary hammer line-up, the HR2475 is engineered with the Makita Motor Advantage. This includes field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars. These features deliver the most efficient transfer of energy for more power and longer tool life.

More Efficient Work

Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. The sequential impact timing feature delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50 percent faster drilling.

Comfort and Ease of Use

Comfort and ease-of-use features include an ergonomic and well-balanced design with a rubberized D-handle comfort grip and a soft grip side handle. Additional features include a one-touch sliding chuck for easy bit changes, a recessed lock-on button for continuous use, and a large trigger switch. The multiple chisel positioning allows the bit to be set at 40 different positions to align with the application. The extended life brushes are longer for less downtime and more work between service intervals.

Versatile Design for a Range of Applications

The HR2475 is a versatile and hard-hitting rotary hammer for masons, remodelers, electricians, maintenance crews, and general contractors seeking a best-in-class 1-inch rotary hammer. The HR2475 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Rotary Hammers

Makita's concrete rotary hammers deliver hard-hitting performance and more productivity with less vibration. Makita rotary hammers are engineered with the Makita Motor Advantage, which includes field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life. Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50 percent faster drilling. The constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita HR2475 1-Inch D-Handle Rotary Hammer includes: side handle, depth gauge, and tool case.

From the Manufacturer

Makita's new 1 inch rotary Hammer has a powerful 7amp motor 0-1100rpm& 0-4,500 rpm for demanding applications. It has a three mode operation: rotation only, hammering with rotation or hammering only. A one touch sliding chuck allows for quick bit changes. This Makita Hammer has 40 different angle settings for increased convenience.

• Powerful 7.0 AMP motor delivers 0 to 1,100 RPM & 0 to 4,500 BPM for the most demanding applications
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50 percent faster drilling
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Extended life brushes are longer for more work between service intervals and less downtime
• 40 bit angle settings allow the bit to be set at different positions for operating convenience; Optimum Range (concrete drilling) 3/16 to 1/2 inch max. capacity (concrete drilling) 1 inch
• 3 mode operation for ""Rotation Only"", ""Hammering with Rotation"" or ""Hammering Only"" for multiple applications

User questions & answers

Question:	How much weight
Answer:	Yes, it's adjustable to fit all phones.
Question:	can this be used to remove (Chizel) ceramic wall and floor tile from drywall and wood
Answer:	I think it works with any phone.
Question:	Can somebody send me a picture of what they got? Is it like the one in the picture? What does tool only mean
Answer:	That's correct. I have the same style Lexus and I cannot fit the product on the vents in the middle of the dashboard; it fits awkwardly on the vent in the left-hand side of the steering wheel but it is very unsteady and not easy to use. I was very disappointed.
Question:	Can you send me one similar to 220 v? At APO address
Answer:	Yes, the clip rotates. You can clip it horizontal or vertical.

Product features

Makita HR2475 1" Rotary Hammer, accepts SDS-PLUS bits (D-handle)

Makita’s versatile HR2475 1-inch Rotary Hammer (Accepts SDS-PLUS) delivers more efficient hitting in a compact size for faster, more productive work.

7 AMP Motor Delivers 4,500 BPM

The HR2475 is powered by a 7 AMP motor that delivers a no load speed of 0-1,100 RPM, with 0-4,500 BPM and 2.7 Joules of impact energy. Three-mode operation includes “Rotation Only,” “Hammering with Rotation” and “Hammering Only” for multiple applications.

Makita Motor Advantage

Consistent with the rest of Makita’s rotary hammer line-up, the HR2475 is engineered with the Makita Motor Advantage. This includes field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars. These features deliver the most efficient transfer of energy for more power and longer tool life.

More Efficient Work

Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. The sequential impact timing feature delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50% faster drilling.

Comfort and Ease of Use

Features include an ergonomic and well-balanced design with a rubberized D-handle comfort grip and a soft grip side handle. Additional features include a one-touch sliding chuck for easy bit changes, a recessed lock-on button for continuous use, and a large trigger switch. The multiple chisel positioning allows the bit to be set at 40 different positions to align with the application.

Product description

The Makita 18V LXT Lithium-Ion Cordless 7/8" SDS-Plus Rotary Hammer (model XRH04Z, tool only) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH04Z has 3-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks, with a more compact design and less vibration. It's part of Makita's expanding 18V Lithium-Ion series, the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

• Compact Pistol Grip Design
• Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
• Built-in clutch reduces gear damage by automatically disengaging gears if bit binds. One-touch sliding chuck for quick bit changes
• Faster drilling with synchronized RPM and BPM

User questions & answers

Question:	Does the hepa filter attachement fit on this drill
Answer:	Our silicone basting pastry brushes are designed and made for pastry, grilling and food preparing purpose. We will not recommend for any paint works.
Question:	How does this perform against solid concrete
Answer:	Yes, our silicone basting pastry brushes are easy to clean and dishwasher safe.
Question:	this is sds
Answer:	Dear Customer, thank you for the interest in our Silicone Basting Brush. There will be more color combinations available in the coming months and color combo customization is definately we shall consider in future. Stay tune. Cheers.
Question:	Whats the difference between this model vs the xrh03z
Answer:	Sure. Our silicone basting pastry brushes resist temperature up to 446 ℉ (230 °C). You can use them when over the grill and applying sources on your food. Just Remember Not To Burn It over direct frame.

Product features

Makita XRH04Z 18V LXT Lithium-Ion Cordless 7/8" Rotary Hammer, Tool Only

The Makita 18V LXT Lithium-Ion Cordless 7/8” SDS-Plus Rotary Hammer (model XRH04Z, tool only) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH04Z has 3-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks, with a more compact design and less vibration.

SPEED

Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM

CONVENIENCE

3-mode operation for “rotation only”, “hammering with rotation” or “hammering only”

DURABILITY

Job site tested shock absorbent handle protects the battery housing for extra durability

COMFORT

Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue

• Compact Pistol Grip Design
• Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Provides up to 65% more run time per charge compared to BL1830
• Reaches full charge in 45 minutes or less

Product description

The Makita 1-9/16" Rotary Hammer (model HR4002) has a powerful 10 AMP motor that delivers 2,500 BPM for the most demanding applications. The HR4002 includes a torque limiting clutch that is engineered to prevent gear damage by automatically disengaging gears if the bit binds. The "no hammering when idling" function helps increase tool life, and the soft grip handle provides increased comfort on the job.

From the Manufacturer

The new HR4002 rotary hammer is sleek, powerful, compact, and ergonomically designed to increase your comfort as well as your production. Featuring a powerful 10 AMP motor, a no hammering option to aid in a longer life and greater performance of your tool, a soft grip to help your comfort and reduce the vibrations as well as a built-in torque to limit clutch disengagements if the bit jams and to ensure stable torque control.

• Power Tools and Accessories
• Country of manufacture: China
• Manufacturer: Makita
• Built-in torque limiting clutch disengages if bit jams
• Powerful 10 AMP motor delivers for the most demanding applications
• One-touch sliding chuck for quick & easy bit changes
• Dual mode operation Rotation with hammering and Hammering only make this tool
• Soft grip helps reduce the level of vibration felt by the end-user

User questions & answers

Question:	Shows a drill bit, comes with it at the listed price
Answer:	Makita has the best warranty and fastest service centers. They turn the equipment around in one to two weeks.
Question:	what is the difference between sds and sds max? I'm tryiny to drill 3/8 holes into 50 - 60 year old concrete slabs. Is Sds good enough
Answer:	All SDS bits are the same configuration so they will fit any tool that calls them out
Question:	What about warranty? Where can I look for assistance
Answer:	I have no idea! It was supposed to be an original Whirlpool part, specifically to fit my refrigerator. It was over $70 and did not fit. We ended up returning it, went to Lowe’s, purchased a wooded dowel and cut a piece of plexiglass to fit. Much cheaper and works perfectly!
Question:	Will the bosch sds core bit fit into this
Answer:	A small is approximately a dress size 4/6.

Product description

Makita created a new class in cordless with 18V LXT sub-compact tools. Makita sub-compact gives users 12V handling with 18V performance and compatibility with the world’s largest 18V cordless tool system. The 18V LXT sub-compact Brushless 11/16” rotary hammer (accepts SDS-Plus bits) is ideal for working in tight spaces and for overhead conditions. The XRH06ZB has an efficient Makita BL Brushless motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4, 800 BPM and .81 ft.Lbs./1.1 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. Lights, and one-touch sliding chuck for easy bit changes. It’S part of Makita’s expanding 18V LXT system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

• Brushless motor delivers 0-680 RPM, 0-4, 800 BPM and .88 ft.Lbs./1.2 Joules of impact energy for faster drilling
• Compact and ergonomic design at only 10-3/4"
• Weighs only 4.6 lbs. With battery (battery not included) for reduced operator fatigue
• Vibration absorbing handle Moves independently of the motor and hammer mechanism for increased operator comfort
• The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application

User questions & answers

Question:	i was considering buying this for removing floor tile. with a flat chisel work with this model? thanks in advance
Answer:	No it's not
Question:	will this work with a regulor drill bit
Answer:	Agree
Question:	Is this compatable with the hepa dust extraction system
Answer:	No .. It does not come with a drill bit .. I bought bits that would suit my needs and have read other owners requirements are different than mine so they use different bits ..
Question:	Makita, why no chipping setting? This sds would have been so perfect
Answer:	Sds plus unless they are large holes not 1000s sds max is heavy for a 1/2" hole a 1" or 1-1/8" is perfect

Product features

Makita XRH06ZB 18V LXT Sub-Compact Brushless 11/16" Rotary Hammer, Tool Only

Makita created a new class in cordless with 18V LXT Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT Sub-Compact Brushless 11/16” Rotary Hammer (accepts SDS-PLUS bits) is ideal for working in tight spaces and for overhead conditions.

Product description

The 18V LXT Lithium-Ion Brushless 1" Rotary Hammer with HEPA Dust Extraction Vacuum Attachment (model XRH01ZVX, tool only) combines Makita BL Brushless Motor Technology with concrete dust extraction - without the cord. XRH01ZVX is an OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6). The XRH01ZVX is the industry's first 1" capacity rotary hammer in the 18V category, and sets new standards in the cordless tool category. The XRH01ZVX is powered by an efficient BL Brushless Motor with variable speed that delivers 0-950 RPM, 4, 700 BPM, and 2. 0 Joules with up to 50% longer run time than current Makita 18V LXT rotary hammers. The efficiency of the BL Brushless Motor allowed Makita engineers to power both the tool and the separate vacuum motor with a single 18V (not 36V) Lithium-Ion battery (sold separately). The separate vacuum motor also increases suction efficiency without sacrificing the performance of the rotary hammer. The result is a powerful and efficient rotary hammer with vacuum attachment that delivers the same drilling capacity as the leading competitors' 36V rotary hammers, but with up to 2. 5 lbs. less weight (with battery, sold separately). The HEPA Dust Extraction Vacuum Attachment is trigger-activated for user convenience. The rubber suction gasket is engineered to provide consistent contact with the work surface, where the dust is channeled to the clear dust container with HEPA filter, which captures 99. 95% of dust particles (size . 3 microns). An added feature is a 2-second delay on the vacuum motor: After the trigger is released, the 2-second extended suction collects remnant dust and particles as the bit is being pulled out of the work surface, making the XRH01ZVX ideal for overhead drilling.

• Powerful BL Brushless motor delivers 0-950 RPM, 0-4, 700 BPM and 1. 7 ft. lbs. of impact energy to handle the most demanding applications
• The on-board dust extractor attachment captures concrete dust during drilling and is activated by the tool for operator convenience
• OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6)
• Efficient HEPA filtration system captures 99. 97% of particulates . 3 microns and larger
• Extractor is powered by a separate motor to maintain drilling performance and provide a 2-second delay to help capture remaining dust

User questions & answers

Question:	Can i use makita t-01301 core bit with this device to drill a large hole thru a cinder block
Answer:	Yes it can, when I don't have to worry about the dust I leave it off for longer battery life.
Question:	Is it possible to change the chuck of this tool as in the previous version of it
Answer:	#1 is two bare-tools in different boxes. #2 is a combo with the same tools as the first one but come in a free Makita bag for less money
Question:	Can the vacuum attachment be removed
Answer:	I haven't tried, but since it's an SDS drill, I guess a flat chisel SDS bit would work for your purpose. Note that the impact power of this drill is not very high, so it might take a bit longer to get the job done
Question:	what is the difference in bundle 1, and bundle
Answer:	No it won’t work with regular drill bits. It only works with bits made for sds rotary hammers. Makita does make a hammer drill that accepts regular drill bits.

Product description

Makita's 18V LXT Lithium-Ion Cordless 7/8-Inch SDS-Plus Rotary Hammer (model XRH03Z, tool only) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH03Z has three-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks. The LXT Lithium-Ion Battery makes this rotary hammer perfect for remote use, where running a cord is not an option. Job site tested shock absorbent handle protects the battery housing for durability. It's part of Makita's expanding 18V Lithium-Ion series, the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

• Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
• Large 2-finger variable speed trigger for added convenience
• Faster drilling with synchronized RPM and BPM
• Torque limiting clutch reduces gear damage by automatically disengaging gears if bit binds

User questions & answers

Question:	Is it brushless
Answer:	SHIPS IN A CARDBOARD BOx , no case
Question:	How well does this hammer work on soil?, and how well does it work on clay
Answer:	Definitly ! Lots of power
Question:	This item cames with a hardbox? Or in what kind of packing does it comes
Answer:	No drill chuck included
Question:	Itl this drill work if i need to drill 3/4 in hols 6 inches deep in concrete for founcdation anchors
Answer:	it comes with a case....but the hepa filter doesn't fit in it.....I would get a clc or milwaukee bag....

Product features

Makita XRH03Z 18V LXT Lithium-Ion Cordless 7/8" Rotary Hammer, accepts SDS-PLUS bits, Tool Only

Makita's 18V LXT Lithium-Ion Cordless 7/8-Inch SDS-Plus Rotary Hammer (model XRH03Z, tool only) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH03Z has three-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks.

SPEED

Synchronized RPM & BPM delivers more efficient drilling

VERSATILITY

3-mode operation for multiple applications

DURABILITY

Job site tested shock absorbent handle protects the battery housing for extra durability

CONVENIENCE

One-touch sliding chuck for quick bit changes

Product description

The Makita 18V X2 LXT (36V) Brushless 1-9/16” advanced AVT rotary hammer with AWS is a cordless concrete solution that’s loaded with advanced engineering for maximum efficiency. It’S equipped with auto-start wireless system (AWS) for wireless connectivity with an aws-equipped dust extractor (sold separately), and features advanced AVT for reduced vibration. It’S powered by two 18V LXT batteries (sold separately) and an efficient Brushless motor for maximum power, speed and run-time for corded demands, without the cord. The XRH07ZKU is engineered with advanced Anti-Vibration technology (AVT), a synchronized three-component system for significantly less vibration. Avt is more than just a padded handle. The three-component system includes an internal counterbalance that uses air pressure to move counterweight Pistons in the opposite direction of the drive piston to actively reduce vibration. The result is a low vibration rating of only 5M/s², but with No compromise in performance: the efficient Brushless motor delivers a full 8.4 ft. Lbs. Of impact energy, with 250-500 RPM and 1, 450-2, 900 BPM. For improved efficiency, it’s equipped with auto-start wireless system technology. Aws utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). when the trigger of the aws-equipped XRH07ZKU is engaged, the aws-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. Aws is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and Constant speed control that automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. Soft start technology suppresses start-up reaction for more precision and better accuracy, and the soft no-load function automatically reduces the speed of the motor when idling – this helps increase tool life and battery run-time. The XRH07ZKU is engineered for a range of concrete applications including drilling/coring through-holes for pipes, setting larger anchors, securing tilt-wall supports, small chipping applications, and more. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, Sprinkler installers, and general contractors seeking a best-in-class rotary hammer. It accepts SDS-MAX bits. It’S part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

• Two 18V LXT Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT platform (batteries not included)
• Powerful BL Brushless motor delivers 250-500 RPM, 1, 450-2, 900 BPM and 8.4 ft.Lbs. Of impact energy to handle the most demanding applications
• Auto-start Wireless system (AWS) utilizes Bluetooth technology for Wireless Power-on/off communication between tool and dust extractor
• Dust extraction capability with optional Makita dust attachment kit
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds

User questions & answers

Question:	Does this come with a hard case
Answer:	Check your RCA cable and see if it’s plugged into the SUb port on the back of the radio. If it is change it to the other ports. Should have 3 ports for the RCA jacks on the back of the radio.
Question:	Is this tough on batteries? I know it would be used more for holes and popping tile ect. rather than breaking but heard it goes through a lot of them
Answer:	Yes. Just like a car amp would
Question:	Is this drill reversible? I can't seem to find a reversible rotary hammer
Answer:	I hooked up in a boat so not sure on Ford, but I have installed many amps in vehicles and as long as you have rca ports it will work

Product features

Makita XRH07ZKU 18V X2 LXT Lithium-Ion (36V) Brushless Cordless 1-9/16" Advanced AVT Rotary Hammer, accepts SDS-MAX bits, AWS, Tool Only

18V X2 LXT (36V) Brushless 1-9/16” Advanced AVT Rotary Hammer with AWS is a cordless concrete solution that’s loaded with advanced engineering for maximum efficiency. It’s equipped with Auto-Start Wireless System (AWS) for wireless connectivity with an AWS-equipped dust extractor (sold separately), and features Advanced AVT for reduced vibration. It’s powered by two 18V LXT batteries (sold separately) and an efficient brushless motor for maximum power, speed and run-time for corded demands.

Product description

The 18V LXT Lithium-Ion Brushless 1” rotary hammer with HEPA dust extraction vacuum attachment (model XRH011TX) combines Makita BL Brushless motor technology with concrete dust extraction - without the cord. The XRH011TX is the industry's first 1" capacity rotary hammer in the 18V Category, and sets new standards in the cordless tool Category. XRH011TX is an OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6). The XRH011TX is powered by an efficient BL Brushless motor with variable speed that delivers 0-950 RPM, 4, 700 BPM, and 2. 4 Joules with up to 50% longer run time than current Makita 18V LXT rotary hammers. The efficiency of the BL Brushless motor allowed Makita engineers to power both the tool and the separate vacuum motor with a single 18V (not 36V) Lithium-Ion battery. The separate vacuum motor also increases suction efficiency without sacrificing the performance of the rotary hammer. The result is a powerful and efficient rotary hammer with vacuum attachment that delivers the same drilling capacity as the leading competitors’ 36V rotary hammers, but with up to 2. 5 lbs. Less weight (with battery).

• Powerful BL Brushless motor delivers 0-950 RPM, 0-4, 700 BPM and 1. 7 ft. lbs. of impact energy to handle the most demanding applications
• The on-board dust extractor attachment captures concrete dust during drilling and is activated by the tool for operator convenience
• OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6)
• Extractor is powered by a separate motor to maintain drilling performance and provide a 2-second delay to help capture remaining dust
• Efficient HEPA filtration system captures 99. 97% of particulates . 3 microns and larger

Product description

The Makita 1” AVT rotary hammer (model HR2641, with D-handle) is engineered with anti-vibration technology (AVT ), an internal counterbalance system for significantly less vibration. The HR2641 combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling. The HR2641 has an 8 amp motor that delivers 2.9 Joules (2.1 ft.Lbs.) of impact energy to handle the most demanding applications. The 3-mode operation offers “rotation only”, “hammering with rotation” or “chipping only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability. The ergonomic D-shaped handle with a rubberized soft grip provides increased operator comfort, as well as a retractable tool hook to secure the tool to studs, ladders, and rails when not in use. The HR2641 is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, Sprinkler installers, City maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer.

• Powerful 8 amp motor delivers 2.1 ft.Lbs./2.9 J. Of impact energy to handle the most demanding applications
• Anti-vibration technology (AVT) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of the drive PISTON
• Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
• Recessed hammer function selector located below gear housing for improved durability
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Powerful 8 AMP motor delivers 2.1 ft.lbs.. of impact energy to handle the most demanding applications
• Anti-Vibration Technology (AVT) is an internal counterbalance system that greatly reduces vibration

User questions & answers

Question:	Can this tool use for demo
Answer:	Go to home depot Bosch 1/2 in. x 6-1/4 in. x 2-5/32 in. Black Metal SDS-plus Rotary Hammer Adapter Chuck
Question:	Is it chuckless
Answer:	It will not work with smooth (straight) shank drill bits - The Rotary hammer "locks" in on the slots of the SDS bits.
Question:	Any recommendations for a replacement chuck for this so that it is possible to use non SDS bits
Answer:	we use SDS bits and have drilled 3/4" holes through cinder block without a problem
Question:	Over the years I have invested a lot of money in drill bits (many are masonry) will they work with this drill
Answer:	Doesn’t look possible

Product features

1 inch AVT Rotary Hammer, accepts SDS-PLUS bits (D-Handle

The Makita 1 inch AVT Rotary Hammer (model HR2641, with D-Handle) is engineered with Anti-Vibration Technology (AVT), an internal counterbalance system for significantly less vibration. The HR2641 combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.

The HR2641 has an 8 AMP motor that delivers 2.9 Joules (2.1 ft.lbs.) of impact energy to handle the most demanding applications. The 3-mode operation offers “rotation only”, “hammering with rotation” or “chipping only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability. The ergonomic D-shaped handle with a rubberized soft grip provides increased operator comfort, as well as a retractable tool hook to secure the tool to studs, ladders, and rails when not in use.

The HR2641 is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer.

COMFORT

Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration

PERFORMANCE

Integrated damper spring is engineered to absorb impact vibrations from the drill bit

CONVENIENCE

Retractable tool hook secures the tool when not in use

DURABILITY

Recessed hammer function selector located below gear housing

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during the one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories.

This warranty does not apply where:

- Repairs have been made or attempted by others

- Repairs are required because of normal wear and tear

- The tool has been abused, misused or improperly maintained

- Alterations have been made to the tool

IN NO EVENT SHALL MAKITA BE LIABLE FOR (A) ANY INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE SALE OR USE OF THE PRODUCTS SOLD HEREUNDER, OR (B) ANY AMOUNT IN EXCESS OF THE AMOUNT ACTUALLY PAID TO MAKITA FOR THE PRODUCTS SOLD HEREUNDER FOR ANY LIABILITY ARISING FROM THE SALE OR USE OF THE PRODUCTS SOLD HEREUNDER. THIS LIMITATION APPLIES BOTH DURING AND AFTER THE TERMS OF THE WARRANTY.

MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF "MERCHANTABILITY" AND "FITNESS FOR A SPECIFIC PURPOSE," AFTER THE ONE-YEAR TERM OF THIS LIMITED WARRANTY.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

Model HR2811F is a versatile, high-powered rotary hammer with an L-shape design ideal for horizontal work. The hammer accepts SDS-PLUS bits, and is powered by a 6.7 AMP variable speed motor delivering 2.7 Joules of impact energy. The HR2811F features 3-mode operation for “rotation only”, “hammering with rotation”, or “hammering only” for multiple applications, with 0-1,100 RPM and 0-4,500 BPM. The torque limiting clutch prevents gear damage by automatically disengaging gears if the bit binds. The HR2475 has an LED light for improved illumination of the work surface. Makita rotary hammers are engineered with the Makita Motor Advantage, which features field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars. These engineering points-of-difference increase the energy transfer efficiency for more power and longer tool life. Also included in the HR2811FX is the Makita 4-1/2 in. Angle Grinder. The 4-1/2 in. Grinder has a 7.5 Amp motor for high power output and 10,000 RPM for a range of grinding applications.

From the Manufacturer

Built-in L.E.D. light illuminates drilling surface and increases visibility. RELIABIILIITY Built-in torque limiter ensures stable torque control. COMFORT - Vibration absorbing handle provides greater comfort for the end-user VERSATIILIITY - 3 Modes: Rotation only, Hammering with Rotation & Hammering Only makes this hammer versatile makitatools.com L.E.D. LIGHT ILLUMINATES DRILLING SURFACE 3-Mode Operation: Rotation Only, Hammering with Rotation & Hammering Only. Powerful, Compact, Ergonomic Design with Padded grip and Side Handle for Increased Operator Comfort. Extended Service Life of Carbon Brushes “No Hammering when Idling” Function Ensures Extra-low Vibration Under No Load. 0 - 1,100 RPM; 0 - 4,500 BPM for Demanding Applications. This model comes a 4 1/2 inch grinder as a 'value added.

• Powerful 7.0 AMP motor with 0-1,100 RPM & 0-4,500 BPM for demanding applications
• Vibration-absorbing back handle for operator comfort
• L.E.D. light illuminates drilling surface for more productivity in low light applications
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only"
• One-touch sliding chuck for quick bit changes
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• "No hammering when idling" function helps increase tool life

User questions & answers

Question:	Does this hammer come with a case
Answer:	Never tried it but I don’t think so this is a light duty hammer drill
Question:	Does the rotary hammer come with a case
Answer:	Is made in USA
Question:	Can it drive ground rods
Answer:	I would not use it for demo work. I use it only for drilling holes in concrete. It is smooth and accurate and powerful enough to get this done well. I would rent a bigger hammer type tool and beat that up - not this one!
Question:	Where is it made
Answer:	Chuck key is not needed