10 best genesis drills
Genesis GCD18BK 18 Volt Cordless Variable Speed Drill/Driver Kit, Grey, 3/8-inch chuck with Hard Shell Carrying Case, 13 Bit Assortment, and Ni-Cad Battery Charger
Product description
18 Volt cordless Drill/Driver; 3/8-Inch keyless chuck; Variable speed 0-550 RPM; The drill features electric brake, built-in LED working light, and Magnetic tray for bits and screws. A Great tool for the jobs around the house; Includes one 18V Ni-Cad battery pack, one charger, 13-Pc. Drill/Driver Bit Set and Storage Case. Item have the three paws (the part that holds the bit) retracted inside the chuck.
- 3/8-Inch Keyless Chuck, Built-in LED Work Light, On-board Bubble Level
- 2 Year Limited Warranty
- 16 Position Torque/Clutch Settings, Electric Brake
- Magnetic Bit Tray, Rubberized Non-slip Pistol Grip
- Includes: 1-Battery,1-Charger, 13-Pc. Drill/Driver Bit Set and Storage Case
User questions & answers
| Question: | Does it have a vertical and horizontal level |
| Answer: | Seems like its too much power for that. I got this hooked up too a 1400 watt 12' sub and its hits HARD.. |
| Question: | Does the battery charger take 220 V input |
| Answer: | Hello, The TR4000.1D should work with your setup. Thank you. |
| Question: | Does it come with a battery charger |
| Answer: | It should do quite nicely I have it pushing 4 VM 12's an it still has power to go. Am running mine off 0ga wire cause I have noticed with out good power an ground it will heat up. |
| Question: | Main reason I'm looking at this drill is for poking a hole in beach sand for umbrella, is it good for that purpose |
| Answer: | Yes your power supply needs to b very strong, i wud suggest you get a power cap! I have this amp pushing 2 15 kicker comp right now, very powerful!! |
Genesis GLCD20CSE Special Edition 20V Lithium-Ion Cordless Drill/Driver with Built-in LED Light, 19+1 Torque Position Settings, Removable/Rechargeable 1.3 Ah Battery and Charger Included
Genesis
Product description
Genesis introduces the Special Edition Series 20-Volt Lithium-Ion Cordless Drill/Driver with a Built-in LED Work Light, Removeable 20V Lithium-Ion Battery, 1-hour quick charger, a Double-Ended Screwdriver Bit, and Belt Clip. This drill/driver is compact and extremely powerful. Featuring 19 + 1 Torque/Clutch settings, an electric break, and variable speeds between 0-600 RPMs, this drill is a must-have for your next project. The 3/8” (10mm) single sleeve keyless chuck will provides the perfect fit for all standard drill bits – plus, the included double-ended screwdriver bit. Never question the amount of power you have left with the on-board battery power indicator to let you know when to change your battery out or pop it on the quick-charger before finishing your task. The built-in LED work light provides crystal-clear guidance as you work your way through your task. Get the most performance out of your new favorite tool with the included 20-Volt Special Edition Series Lithium-Ion Rechargeable Battery and 1-hour quick charger so your project is never waiting for power. Add an additional battery (GLAB20C) for non-stop performance. Backed by the Genesis 2-Year Manufacturer’s , this drill set includes everything you need to take on your next task while giving you peace of mind. Part of the Genesis Special Edition 20V Lithium-Ion Power Tool Series.
- Compact, Lightweight, and Extremely Powerful
- 3/8” (10mm) Single Sleeve Keyless Chuck
- On-Board Battery Power Indicator: Know ahead of time when the battery needs to be recharged.
- 19 + 1 Torque/Clutch Settings: Set torque settings for different materials and applications.
- Built-In LED Work Light for the ultimate exposure on tough or detailed tasks
- Variable Speed (0-600 RPM) for Versatility and Electric Brake: Variable speed for different drill and fastener applications
- Removable 20V Lithium-Ion Battery Included – additional Replacement Battery sold separately (search: GLAB20C) for non-Stop Performance
Genesis GLCD2038A 20V Lithium-ion Battery-Powered Cordless Variable Speed Drill Driver with 3/8" Chuck, Built-In LED Work Light, 20V Battery, Charger and Double-Ended Screwdriver Bit, Grey/Black/Green
Genesis
Product description
Lose the cord but don't give up the power! get more power and run time with this 20-Volt cordless li-ion 2-speed drill driver from Genesis! this versatile power tool features 2 variable speed ranges and 21 + 1 torque/clutch settings. And when you put this cordless drill away for months at a time, its Lithium Ion battery will still hold a charge for up to 18 months!
- More power & double the run time of nicd drills
- Battery holds its charge up to 18 months in storage
- High-performance motor produces up to 250in-lbs of torque
- 2 variable speed ranges for versatility
- Includes 20V battery, charger & double-ended screwdriver bit
User questions & answers
| Question: | What is the mAh capacity of the 20volt lithium ion battery |
| Answer: | It does not work outside during the day. For that reason I returned mine for a full refund |
| Question: | Does it has light |
| Answer: | I have this amp. been going good and had it for 2 years. doesnt get hot. but i do knnow if you dont have a thick enough gauge of wire to supply current to any amp it will heat up a bit. but if that doesnt work it is possible it could be defected. I also upped my power fuse to 80 amps from 60 amps and it helped a lot. fuses on amp itself never blew for me because protective circuit would shut off amp when I push it. I push it and it just keeps goin. i would make sure its also grounded properly. make sure there is no nicks or cut in power wire and make sure there is no chance of metallic dust that would get on positive terminal to amp(depending on what type of work you do) |
| Question: | Do you have a battery charger for a 20v lithium-zion genesis drill |
| Answer: | My husband said no. The amp won't overheat it it may blow your subs. He said he rarely runs his at full power. |
| Question: | I have it fully charged and it won’t work..ideas |
| Answer: | There is ports for speakers but I think you may want to step up to the next model because you may want a little more power for the sound and thump you want. Not putting that amp down, its good just not strong enough. |
Genesis GSHD1290 1/2" 9.0 Amp Variable Speed Spade Handle Electric Mud Mixer Drill with Lock-On Button, Three-Position Auxiliary Handle, Two-Position Spade Handle, and Chuck Key
Genesis
Product description
The Genesis GSHD1290 Spade handle drill is great for mixing applications as well as projects that require a larger drill. Mixing drywall mud or paint by hand is a thing of the past. Quickly mix tile thinnest, and grout compound for your next DIY project.
- The ½” inch chuck is perfect for larger bits used for mixing mud or drywall Putty or drilling applications!
- Powerful – the 9. 0 amp has the power to mix thick dry wall mud, paint, and thinnest. You can also drill into metal, wood, and composite Materials!
- Control – with the included spade handle, and Auxiliary side handle, you maintain control over the drill the entire time it’s in operation!
- Confidence - all Genesis branded tools come standard with a 2 year home use ! |Genesis is located in South Carolina!
- Versatility - the variable speed trigger with dial control means you can mix paint, thinnest, grout, drywall mud, or Mortar with ease.
- Comfort - The lock-on button convenient locks the trigger in place for comfortable extended use
- Accessories - Chuck key, aux. Side handle, and Spade handle
User questions & answers
| Question: | What is the pilot size on the chuck key |
| Answer: | Absolutely not, this pump is by far one of the most reliable ones on the market. I have one in my pond that never turns off and on in my 180gal salt water fish tank and has been running for about 10plus years. |
| Question: | Where can I find the replacement carbon brushes |
| Answer: | Don’t buy it. I bought one that was defective when I received it. Had it replaced and the replacement was defective as well. Cool idea but not if it doesn’t work. Company historically does not have a good quality control system. Lots of complaints about the exact same thing I wish I had read before I purchased. Amazon replaced the first one and refunded the second one without issues. No problems with amazon at all. Don’t buy this laser zero junk. |
| Question: | What size chuck key does it use |
| Answer: | I use bore sights for rough adjustments on my gun sights. Then, fire bullets and tweak for the ballistics of the ammo used. I did use the Absolute Zero with a bore sight in my 7mm magnum rifle, in my back yard at 10 yards, before going to a range. I wanted to get a feel on how to use the Absolute Zero system. I even adjusted my scope as per instructions. When I got to the range and fired my first shot, I had to make only a minor adjustment of the scope for the second shot to be where I wanted it for a 200 yard zero. My next five shots were within a one inch square at 100 yards. |
| Question: | what is the RPM of this drill |
| Answer: | Didn’t work for me. |
Genesis GLCD122P 12V Lithium-ion Battery-Powered Cordless Variable Speed Drill/Driver with 3/8" Chuck, Trigger-Activated LED Light, 12V Battery, Charger and Double-Ended Screwdriver Bit
Genesis
Product description
Genesis GLCD122P 12-Volt 2-speed drill driver is a compact, lightweight and powerful drill. Powered by lithium-ion technology, it has more power and double the run time of NiCad drills. The included lithium Ion Battery holds a charge for when you need it.
•High performance motor produces up to 250 in. lbs. of torque
•2 variable speed ranges (0-350 and 0-1300 RPM) for versatility
•3/8 in. single sleeve keyless chuck with 13 clutch/torque settings
•1300 mAh battery holds its charge up to 18 months in storage
•Built-in LED work light, belt clip and wrist strap
•Includes drill driver, charger, battery and 1 double-ended screwdriver bit
Add The Genesis GLCD122P 12 Volt Cordless Drill to your tool set Today!
- High-Performance Motor Produces up to 250 in. lbs. of Torque
- Battery Holds its Charge up to 18 months in Storage
- 13 Torque/Clutch Settings and an Electric Brake for added control
- Two Variable Speed Ranges for Versatility and power
- LED Light, Belt-Clip, Electric Brake - this Drill/Driver gives you the power and confidence to get the job done!
User questions & answers
| Question: | Does this drill have a level bubble |
| Answer: | Very quiet. 12 of these pumps will make less noise than a microwave |
| Question: | What is the shipping weight of this kit |
| Answer: | Yes, the 12756 impeller assembly for the 40132 Supreme Hydro-Mag Model 12 has a ceramic shaft. |
| Question: | Can I buy a replacement battery charger |
| Answer: | Model 12 with Venturi ITEM# 40132 Maximum Flow Rate 1200 GPH: Watts/Amps 110/1.5 |
| Question: | Does this have quick release chuck |
| Answer: | I purchased and have been using this model for approx 6 months. Can't beat the price! |
Genesis GLSD08B 8V Lithium-Ion Battery-Powered Quick-Change 2-Speed Cordless Screwdriver with LED Work Light, Battery Pack, Charging Stand, 4 Hex-Shank Drill Bits, and 4 Screwdriver Bits
Genesis
Product description
The Genesis 8 Volt Li-Ion 2 Speed Screwdriver has the ability to tackle projects large and small. It includes a strong motor that spins at 200 and 400 RPM and is reversible. It also has a 1/4 in. hex quick-change collet for easy bit changes. This cordless screwdriver comes with 4 screwdriver bits and 4 quick change shank drill bits.
- 1/4 in. hex collet for fast and convenient bit changes
- 2-speed gearbox (200/400 RPM) (no load speed) for a wide range of applications
- 16 Torque/Clutch Settings
- Built-In LED Work Light
- Removeable Lithium-Ion Battery for Longer Run Time - Holds Its Charge up to 18 Months in Storage
User questions & answers
| Question: | Is it variable speed |
| Answer: | You bet if you currently have a lighted button, just remove screws mounting to wall. Disconnect wires and attach to new button, and re mount to wall. And as long as your unit inside your home is working you should be good to go. |
| Question: | can you buy extra batteries |
| Answer: | The Heath Zenith SL-715-1-02 I received had mounting holes 55 mm apart on centers, very close to 2-11/64" apart |
| Question: | Can you buy other size drill bits for this drill or will both bits work in it |
| Answer: | I would think so, if the feed is low voltage. |
Genesis GD38B Variable Speed Reversible Electric Drill with 3/8-Inch Keyless Chuck, Belt Clip, Rubberized Grip, and Lock-On Button, Grey/Green
Genesis
Product description
The Genesis GD38B 3/8" VSR Electric Drill has a powerful 4. 2 Amp Motor and 0-3000 RPM Variable Speed give you plenty of power and versatility and a Lock-On button and belt-clip are included for convenience.
- 3/8 in. (10mm) Keyless Chuck for Quick Bit Changes
- Powerful 4. 2 Amp Motor for All-Purpose Drilling and Driving | Reach for Genesis Power Tools for your next DIY project!
- Variable Speed (0-3000 RPM) and Reversible Motor for Versatility | Choose the perfect speed for starting screws or drilling applications!
- Lock-on Button for Extended Use | Prevent Fatigue during your DIY project!
- Rubberized Non-slip Grip with Belt-Clip
- 2 Year
- Power source type: Corded Electric
- Voltage: 120 volts
User questions & answers
| Question: | Collar diameter |
| Answer: | I use a black and decker drill to do this and it works great. I bought a 1-1/2" x 18" auger bit from amazon years ago and I can set umbrella up in less than 20 seconds with no effort at all. about 6 years ago we were at OBX and I seen a girl who rents umbrella's do this. she would walk along beach and drill about 10 holes approx 8-10 feet apart and then drop the umbrells's into holes. Worked perfect and looked so easy and now thats what we do. In fact, the rest our family uses my drill for same purpose instead of struggling, and the umbrella is more stable if the wind picks up. |
| Question: | Where is it made? China |
| Answer: | this unit is waterproof. |
| Question: | Could this drill a hole in to dry wall so I can install curtains |
| Answer: | I don’t know why the AAPW160 wouldn’t do what you want. |
| Question: | Can I use it to drill a hole in concrete? Is it reversible? Please help, thank you |
| Answer: | contact the manufacturer |
Genesis GCQD38A 3.5 Amp 3/8" Variable Speed Close-Quarter Drill with Non-Slip Grip
Product description
The Genesis GCQD38A 3/8" Close Quarter Drill has a unique shape and a compact head that allow it to get into tight spots where other drills can't. A 3.5 Amp Motor and 0-1600 RPM Variable Speed give you plenty of power and versatility and a Lock-On button and power-on indicator are included for convenience.
- Unique Shape and Compact Head-Gets Into Tight Spots Where Other Drills Can't
- Powerful 3.5 Amp Motor
- Variable Speed (0-1600 RPM) for Versatility
- Lock-On Button for Extended Use
- Power-On Indicator
User questions & answers
| Question: | Is it reversable |
| Answer: | Try cycling the rotation ( CLOCKWISE / COUNTERCLOCKWISE ) switch a few times. |
| Question: | What are warranty term |
| Answer: | horizontal only |
| Question: | Has anyone used this as a sander? Specifically I would like to know if it's powerful enough to use as a bowl sander on a wood lathe |
| Answer: | I don't think so...but that's out of my area of expertise. |
| Question: | plastic or metal gears |
| Answer: | I bought 2 of these drills. The first ones charger died but being the price is right I bought a 2nd. Well the 2nd charger died too. Great drills crappy chargers. Well I just bought a dewalt 18v to 20v adapter and did some mcgaver stuff and my drill works agian! |
Genesis GHD1275 1/2" 7.5 Amp Variable Speed Reversible Hammer Drill with Adjustable Chuck Key, Side Control Handle, Lock-On Button, 360° Auxiliary Handle, and Depth Gauge
Genesis
Product description
Make Genesis Power Tools part of your next project today! The Genesis GHD1275 1/2" Variable speed reversible hammer drill is perfect for drilling into wood, steel, and/or masonry applications. The 1/2" Keyed chuck is great for larger bit to tackle demanding projects. The lock-on button and ergonomic grip is perfect for long use applications. Add Genesis Power Tools to your collection today!
- Powerful 7. 5 Amp Motor | great for drilling through concrete, wood, stucco, or mixing drywall mud, cement, or paint.
- Drill and hammer drill modes for Masonry, Concrete and Wood Applications
- Variable speed: 0-2800 RPM | use slower speeds for mixing. Switch to high speeds for drilling into concrete!
- 1/2" Metal Keyed chuck accepts large diameter bits
- Lock-on button for extended use | prevent fatigue on longer drilling applications!
- Die-cast aluminum gear housing
- Rubberized non-slip grip
User questions & answers
| Question: | Can it hammer only |
| Answer: | 850 RPMHave to say although I wish it had a higher RPM on it.I mix mud with it and it works like a champ!850 RPM is fast enough to whip up any drywall mud.It is a bit on the heavy side but a great bargain for the price I paid for it!Very happy very well built drill |
| Question: | i just need to purchase a side handle attachment for my own drill, do you sell those |
| Answer: | Battery: 20V, Lithium-Ion, 1.5Ah Charger Input: 120 V~/ 60Hz |
| Question: | Is this drill powerful enough to drill a 18 inch deep hole with a 1 inch wood auger bit into a tree stump |
| Answer: | Yes |
| Question: | I would like to aks you, this product, we can do for concrete mix |
| Answer: | Yes |
Genesis 1/2"" 5.0A Variable Speed Reversible Hammer Drill with Auxiliary Handle, Chuck Key and Key Holder and 5ft PowerCord", black (GHD1250SE)
Genesis
Product description
Make Genesis Power Tools part of your next project today! The Genesis SE 1/2" Variable speed reversible hammer drill is perfect for drilling into wood, steel, and/or masonry applications. The 1/2" Keyed chuck is great for larger bit to tackle demanding projects. The lock-on button and ergonomic grip is perfect for long use applications. Add Genesis Power Tools to your collection today!
- Powerful 5.0A 120V Motor at 48,000 Max BPM and 3,000 RPM Max
- Drill and Hammer Modes for Wood, Steel and Masonry Applications
- 1/2" Metal Keyed Chuck Accepts Large Diameter Bits
- Lock-On Button for Extended Use
- 360-Degree Auxiliary Handle
- Includes: Depth Rod, Auxiliary Handle and Chuck Key
Latest Reviews
View all
Dock Plate
- Updated: 02.02.2021
- Read reviews
Golf Cart Batteries
- Updated: 23.01.2021
- Read reviews
American Standard Thermostats
- Updated: 05.01.2021
- Read reviews
Genesis Drills
- Updated: 06.04.2021
- Read reviews
Exide Battery
- Updated: 25.02.2021
- Read reviews