14 best fence pole driver

• Package contains 1 post driver.
• Heavy-wall pipe.
• Sturdy thick rod handles.
• 12 pound drive weight.
• Durable, corrosion-resistant powder coating finish of black.great for product visibility and providing a durable metal finish. Resistant to scratching, fading, chipping, and rust.

User questions & answers

Question:	Is this made in the USA
Answer:	You can drop it at the bottom portion of the filter where the clean water goes. I think you should use just one since most likely it will be submerged in water longer than in smaller water bottles. But if you drink a lot of water and go through entire 1gal of water a day or more than you might need to use two. Hope this helps!
Question:	Will this work on a electric pole ground rod
Answer:	it's heavy? shipping?
Question:	Will this work to pound a 2-3/8" pole in
Answer:	Because its alkaline water which is super good for you. The lyte version has more vitamins but way more ingredients and it doesnt state the ph level which means it probly isn't alkaline
Question:	Is 18 lb driver better than a 12lb one
Answer:	Water.

Product features

Product Overview

This hardware is used to drive T-posts and smaller metal posts into the ground. It has tapered handles for comfortable hand placement, minimizes damage to tops of fence posts when compared to hammering.

Features

1.Heavy-wall pipe

2.Sturdy thick rod handles

3.Durable, corrosion-resistant powder coating finish, resistant to scratching, fading, chipping, and rust

Product Details

1.Primary Material: Metal

2.Weight:

3.Size:

• Heavy duty stake driver. Designed to drive t-post, wood, metal or any type of fence posts up to 2.5" in diameter.
• Easy to use: Ergonomically designed closed handles have heavy duty tubing for a better grip and more control.
• Dimension: Height 24” x Width 7.5” Inside diameter = 2.7"
• Used to drive T-posts and smaller metal posts into ground. Tapered handles for comfortable hand placement. Minimizes damage to tops of fence posts when compared to hammering
• Durable, corrosion-resistant powder coating finish of black.great for product visibility and providing a durable metal finish. Resistant to scratching, fading, chipping, and rust.

User questions & answers

Question:	What diameter post will it handle
Answer:	It depends on many factors such as how hard is the soil because the heavier driver will provide 50% more impact force but will, at the same time, lead to more fatigue for you over time because it is 6 lbs heavier each and every time you use it. This won't matter much if you are just driving a few posts but is a big deal if you are doing several all day long and you just have average strength.
Question:	Does the 30 lb model fit into true 3.5x3.5 inch posts
Answer:	I don’t know. I would assume you could it would just take longer for the water to reach the correct ph. The filters are good for 90 days. I would use a fresh filter with every 5 gallon refill.
Question:	Picture shows metal post, but description states wooden posts. Can this handle mutiple metal post in rocky ground
Answer:	I would email company for a direct answer (they make it) but it was our understanding you can put it in a refillable thermos and it is good for 90 days! We use them and never remove the filter until 90 days is up and time for a new one!
Question:	Confirm: adequate size to drive 4x4 wooden fence posts
Answer:	Hello, GoFiltr infusers will work fine with a straw lid. You can purchase a straw lid or bottle with straw lid via our website. Hope this helps. Have a great day, Jen, GoFiltr Support

Product features

DURABLE POWDER COATED FINISH

This high-quality fence post driver makes it easy for you to drive wooden fence posts deep into the ground. With two tough metal handles its easy to get the post into the right position. Great for product visibility and providing a durable metal finish. Resistant to scratching, fading, chipping, and rust.

• Steel tubular handles for confident grip
• External length 24 cm approx

Product description

Manually driving fence posts and stakes in your yard takes a lot of time and effort. Cut back on the time your job takes to save yourself money and back strain by using this Titian Gas-Powered Post Driver. This post driver is designed for medium-to heavy-duty use by commercial users, homeowners, and workers. Get your task done faster by relying on this garden fence driver to do the hard work. This pole pounder uses a powerful, 1.3-horsepower, 4-stroke, gas-powered engine that drives stakes at 1,850 beats per minute. This gas-powered post driver comes with a 3.25-inch barrel, adapter sleeve for 1-inch and 2-inch diameter posts, rolling carry case, and repair kit. You can drive stakes and poles from 1 to 3-1/8 inches in diameter. Made for all-day use with minimal operator fatigue, this pole pounder sports comfortable grip handles with dampening springs. The springs lessen vibration during operating, helping to reduce fatigue and back strain. This post hole digger weighs only 45 pounds. This makes the ground post driver easy to lift, move, and carry down the fence line.

• HEAVY-DUTY FENCE POST DRIVER: Commercial fence post driver for installing new fencing, structures, signs, frames, rebar stakes, and more around your home or property; Part number: PGD3200
• GREAT FOR COMMERCIAL USE: Powerful 1.3 -horsepower, 4-stroke, gas-powered engine drives stakes at 1,850 beats per minute; Recommended for commercial work;
• FOR POSTS UP TO 3-1/8 INCHES: Drive posts from 1 to 3-1/8 inches in diameter with 3.25-inch barrel and included 2-inch adapter sleeve for 1-inch and 2-inch posts
• EASY AND COMFORTABLE: Designed for all-day use with minimal operator fatigue thanks to comfortable grip handles and dampening springs that lessen vibration to reduce fatigue and back strain; Lightweight at 45 pounds, making the pole pounder easy to lift, move, and carry down the fence line; Simple recoil pull start with trigger throttle and integrated stop button
• EVERYTHING YOU NEED TO START: Includes driver, adapter, rolling carry case, and repair kit; No hoses or external power sources needed, convenient and easy transport with no extra costs; 100-percent self-contained design protects machinery

User questions & answers

Question:	Will this pound 3-inch pipe through limestone? Through hard clay
Answer:	No. Steel “T” posts only
Question:	does it drive t post , or do u need to buy an adapter
Answer:	I am not sure. what I will tell you that this is a grate way to set your fence post. We had 61 post to install and what we did was put the hole in the ground with a gas post hole machine. Then we set the post with the driver when all was plum we filled the hole with concrete. Hope this helps you..
Question:	How deep do i have to go for a 10' fence post
Answer:	I would certainly think so. It would depend on substrate your driving the pole into and the strength of the pole. Might want to try using a rock or hammer and carefully do a quick test. I’ve used it, besides fencing, to put stakes into a garden for tomatoes 🍅. Just was very gentle; granted if the ground was clay or rock it would not have worked.
Question:	Will it drive 2 3/8 line posts for chain link fence
Answer:	It should, but beware if it’s a wooden pole, it may split the top.

Product description

Fence in anything with MAT, 'Your Hardware Ambassador. MAT is a leader in quality fencing products, lawn and garden accessories and distribution solutions. They manufacture and distribute residential and chain link fencing under the YARDGARD brand and agricultural fencing under the FARMGARD brand. MAT also distributes lawn and garden accessories under the long standing Gilbert and Bennett brand.

• Fence post driver
• Comes with handles
• Minimizes damage to tops of fence posts when compared to hammering
• Handles are tapered for comfortable hand placement
• 17 lbs. of power

User questions & answers

Question:	Would this work for 4 x 4 post in the water for lake dock
Answer:	I use mine to drive 2 3/8 oil field pipe for horse fence. Takes about 5 minutes to drive it 3 feet into the ground. I 45 the end going into ground like a chisel point. Also Titan sells an adapter (sleeve) for 2 3/8 that you would want to get. Great tool if you have a lot of fence to put up.
Question:	Three different sizes on one product . What is it’s true weight
Answer:	Internal dimensions 2 11/16"
Question:	How fast can a Prime member get this item
Answer:	I did not buy the 30 lb model and I did not use wooden posts.
Question:	how much does it weigh
Answer:	The internal dimension is 2 11/16". Doesn't matter if it's wood or metal.

• Pack contains 5 posts.
• Space the post 6-ft to 8-ft apart.Tabs on post allow for easy anchoring of rolled fence product.
• 14-gauge rugged steel, light-duty type. 3” x 3-1/3” swedged anchor plate. Polyester powder-coated.
• Durable green powder coating enhances outdoor life and prevents rusting of the steel post.
• You can easily install on signs,garden fence,corner anchor posts,netting wire, also can be used as U channel sign posts that is available in various lengths to meet post signs or mark driveways.

User questions & answers

Question:	Do these require concrete
Answer:	I have this one as well as one with a smaller barrel. (2 inch I think) the smaller one is actually a little better for just T post. But, 3 1/4 barrel one is more versatile. We use it to put up sign posts and silt fence. Both have larger post than a t post. The smaller one we use strictly for to post. So, it just depends on what all you want to use it for. If I were doing strictly t post, I like the smaller barrel better. It is a little lighter and fits a little more steady on a t post. But, if we have a lot to put in, I have used them both for t post.
Question:	Can i connect to make a taller stake
Answer:	The rule of thumb is 1/3 of the height you desire so the answer is 3’4”

Product features

Adjustable Tabs

The studded design allow you to easily attach and secure your rolled fence product to post.

Anchor

Anchor plate helps to provide support and stability

U-Channel

U-channel design for strength

Easy to Install

No digging required for installation, simply drive posts into ground using a post driver or hammer until anchor plate is below ground level.

Easy to Use

Attach the fence wire on the tabs to pull up and support the fence.

Adjust the hook when attach fence and narrow the opening after pull up.

Differe Size

There are 5 different sizes for choice from 3' to 7' U fence post to meet your difference needs.

Multiful Use

Utility fence post for use with your yard, garden, and landscape fence projects.

They are not just for building fence, it can be used in a variety of ways including as a means of straightening a tree, as part of a support lattice for low branches and as the primary supports for an espaliered fruit bush. Or use it as a sign post.

Product description

Manually driving fence posts and stakes in your yard takes a lot of time and effort. Cut back on the time your job takes to save yourself money and back strain by using this Titian Gas-Powered Post Driver with a Honda engine. This post driver is designed for light-duty use by consumer users, homeowners, and workers who are driving less than 1,000 fence posts at once. Get your task done faster by relying on this garden fence driver to do the hard work. This pole pounder uses a powerful, 1.3-horsepower, 4-stroke, gas-powered Honda engine that drives stakes at 1,500 to 2,000 beats per minute. This gas-powered post driver comes with a 3.25-inch barrel, 1-inch and 2-inch barrel adapters, rolling carry case, and repair kit. You can drive stakes and poles from 0.75 to 3 inches in diameter. Made for all-day use with minimal operator fatigue, this pole pounder sports comfortable grip handles with dampening springs. The springs lessen vibration during operating, helping to reduce fatigue and back strain. This post hole digger is also extremely lightweight, weighing only 28 pounds. This makes the ground post driver easy to lift, move, and carry down the fence line.

• LIGHT-DUTY FENCE POST DRIVER: Light-duty fence post driver for installing new fencing, structures, signs, frames, rebar stakes, and more around your home or property; Part number: PGD2875H
• GREAT FOR HOMEOWNER USE: Powerful 1.3-horsepower, 4-stroke, gas-powered Honda engine drives stakes at 1,500 to 2,000 beats per minute; Recommended for consumer use and light-duty work where you're driving less than 1,000 stakes at once
• FOR POSTS UP TO 3 INCH DIAMETERS: Drive posts from 0.75-inch to 3-inch in diameter with 3.25-inch barrel and included 1-inch and 2-inch barrel adapters
• EASY AND COMFORTABLE TO USE: Designed for all-day use with minimal operator fatigue thanks to comfortable grip handles and dampening springs that lessen vibration to reduce fatigue and back strain; Extremely lightweight at 28 pounds, making the pole pounder easy to lift, move, and carry down the fence line; Simple recoil pull start with trigger throttle and integrated stop button
• EVERYTHING YOU NEED TO START: Includes driver, adapters, rolling carry case, and repair kit; No hoses or external power sources needed, convenient and easy transport with no extra costs; 100-percent self-contained design protects machinery

User questions & answers

Question:	Will this drive t posts in hard dirt
Answer:	Item weight reads 14.1 pounds. Shipping weight is different due to the packaging. It's heavy enough to pound down any metal post.
Question:	Will it drive 3 inch pipe in hard ground
Answer:	It took 3 days very fast great product
Question:	Does this come with the adapter sleeve for a driving t-posts
Answer:	Almost 24 lbs and unless you are working out. Have a friend grab one side. It's pretty heavy and that's how it works planting the posts.
Question:	What kind of warranty does this tool have
Answer:	It goes through hard clay. I'm not sure about limestone.

Product description

Manually driving fence posts and stakes in your yard takes a lot of time and effort. Cut back on the time your job takes to save yourself money and back strain by using the Titian Gas-Powered Post Driver. This post driver is designed for light-duty use by consumer users, homeowners, and workers who are driving less than 1,000 fence posts at once. Get your task done faster by relying on this garden fence driver to do the hard work. This pole pounder uses a powerful, 1.3-horsepower, 4-stroke, gas-powered engine that drives stakes at 700 to 1,350 beats per minute. This gas-powered post driver comes with a 4-inch barrel, 1-inch, 2-inch, and 3-inch barrel adapters, rolling carry case, and repair kit. You can drive stakes and poles up to 3-7/8 inches in diameter. Made for all-day use with minimal operator fatigue, this pole pounder sports comfortable grip handles with dampening springs. The springs lessen vibration during operating, helping to reduce fatigue and back strain. This post hole digger weighs only 45 pounds. This makes the ground post driver easy to lift, move, and carry down the fence line.

• LIGHT-DUTY FENCE POST DRIVER: Light-duty fence post driver for installing new fencing, structures, signs, frames, rebar stakes, and more around your home or property; Part number: PGD3875
• GREAT FOR HOMEOWNER USE: Powerful 1.3-horsepower, 4-stroke, gas-powered engine drives stakes at 700 to 1,350 beats per minute; Recommended for consumer use and light-duty work where you're driving less than 1,000 stakes at once
• FOR POSTS UP TO 3-7/8 INCHES: Drive posts up to 3-7/8 inches in diameter with 4-inch barrel and included 1-inch, 2-inch, and 3-inch barrel adapters
• EASY AND COMFORTABLE TO USE: Designed for all-day use with minimal operator fatigue thanks to comfortable grip handles and dampening springs that lessen vibration to reduce fatigue and back strain; Lightweight at 45 pounds, making the pole pounder simple to lift, move, and carry down the fence line; Simple recoil pull start with trigger throttle and integrated stop button
• EVERYTHING YOU NEED TO START: Includes driver, adapters, rolling carry case, and repair kit; No hoses or external power sources needed, convenient and easy transport with no extra costs; 100-percent self-contained design protects machinery

User questions & answers

Question:	will this unit drive tee post in clay
Answer:	One-year warranty on the post driver itself. Additionally, there is a warranty on the Honda engine directly through Honda for one year of commercial use or two years normal use.
Question:	Does this fit U-channel post that are 3.5” wide? Also how fast can I get this shipped
Answer:	No. Installing the fence post does not require concrete.
Question:	how do i order new sleeves for this unit
Answer:	No. I wouldn’t recommend trying that
Question:	will this unit drive 2 3/8 drill stem 3-4 foot deep
Answer:	Yes. It will work just fine. Just cut your 4x4 down to about a 2.95x2.95 and drive it in. Glue back what was cut off once the post is in place. If you don’t need the excess, just glue the cut off sections together to form another post. It’s cost effective.

• Be able to safely and effective drive posts into the ground by having this 1 5/8" post driver cap
• After mounting your post into the desire spot, simply place the post driver on top of the post and use your sledge hammer to drive the post into ground for your desired depth
• This post driver was designed to fit 1 5/8" OD pipe/ post
• Made from durable and high-quality galvanized steel for long-lasting use

User questions & answers

Question:	So this fits in a 2 -3/8 inch chain link fence post
Answer:	Yes ,1”,2”and 3”.They are plastic and they screw on.Do not leave the driver resting on the T post, this will crack the sleeve. Warm the driver up as specified, works best this way. When I ordered a replacement sleeve, I ordered a couple of extras plus a couple of extra tube of grease as well. Grease is cheap use plenty. Would I buy this driver again ? Absolutely. Happy driving.

Product features

Features

• Fits: 1 5/8" OD Ground Posts (0.055", 0.065", SS20, SS40, SCH40)
• Great for driving greenhouse cold frame hoop poles
• Can also be used to drive deer fence posts

Product description

RICE Hydro, Inc. Heavy Duty 3" Durable Steel Post Pounder / Post Driver 27 Pounds of Force, Made in the USA with Handle 3” POST POUNDER / POST DRIVER – Designed to drive t-post, wood, different type of ground rods, metal or any type of fence posts. MADE IN THE USA - HEAVY DUTY WELDED STEEL- With 27 pounds of force, providing maximum down pressure to drive t-post, wood or metal post with ease. EASY TO USE – Ergonomic designed closed handles with 1 ¼ inch heavy duty tubing for a better grip and more control. DIMENSIONS – Height 30” x Width 13” Inside diameter = 3” DURABLE POWDER COATED FINISH - Great for product visibility and providing a durable metal finish. Resistant to scratching, fading, chipping, and rust. ⚠ WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov

• 27 LBS OF FORCE - Work smarter, not harder! This version of our fence pounder is 30” tall, has an inside diameter of 3" and offers 27 lbs of drive weight. It's also available in 2.5" (22 lbs of force) and 2" (15 lbs of force), sold separately, so you can choose the appropriate stake driver for the job.
• DRIVE ANY FENCE POSTS - Our fence post driver works with any post type, including t stakes, metal t posts, and wooden stakes. It can easily be operated by just 1 person, and with the appropriate leverage, can take the back breaking work out of installing a fence.
• HEAVY DUTY DRIVER - Unlike other post pounders and hammers, our post setter features an ergonomic, closed handle design for better grip that provides better control for safer and more accurate operation.
• USA-MADE DURABLE POWDER COATED & WELDED STEEL - Our expertly designed ground rod driver is forged from heavy duty, USA welded steel. It’s finished with a powder coat that protects it from chipping, rusting, or enduring weather damage. Even with heavy use and hasty storage, our high quality fence tool will continue to work like new.
• READY TO USE - You can use this t post driver as soon as you receive it, as it doesn't require gas or electricity like a hydraulic post driver does. Because of its balanced design, it reduces the possibility of damaging the tops of the posts, which commonly happens when a stake hammer is used to drive a post into the ground.

User questions & answers

Question:	What is the largest size angle iron(and wall thickness) that this tool will drive
Answer:	Hi, Mike. Please call Titan Post Drivers directly at 702-293-4262. Ask for Chris. He is the National Service Manager, and he will get you the correct sleeves.
Question:	Can you powder coat this in a blue? usaf ret/disabled combat vet who loves blue & made in usa
Answer:	It depends on the grounds, have drove 1 1/2" piping 3 foot
Question:	Will this work on a electric ground rod
Answer:	Yes
Question:	What is the ID of this tool
Answer:	Yes

Product description

Speeco Post Driver, Heavy Gauge Steel, Speeco, 2 in Diameter, 30 in Height, Steel Handle .

• They are high on demand in the market in various industries for a wide range of applications
• All our professionals are focused towards attaining maximum client satisfaction
• Manufactured in Canada

User questions & answers

Question:	Will this hold up to metal posts
Answer:	It will fit over a 3.9" round post. hope that helps.

• Space the post 6-ft to 8-ft apart. Durable green powder coating. Use with 36-in fencing product. Tabs on post allow for easy anchoring of rolled fence product.
• 14-gauge rugged steel, light-duty type. 3” x 3-1/3” swedged anchor plate.
• Use with 36-in fencing product. Tabs on post allow for easy anchoring of rolled fence product.
• Polyester powder-coated. U-shaped post.
• Package of 10.

User questions & answers

Question:	Is this sturdy enough to fence goats
Answer:	Thank you for your question. Yes, our Heavy Duty 3" Post Pounder / Post Driver will work great on an electric ground rod. It has 27 pounds of force, that provides a maximum down pressure to a post. You will love it. If there is any issues, please feel free to contact us. Thank you.
Question:	Good for snow fence
Answer:	The inside diameter is 3". Please let us know if you have any further questions.
Question:	Is it good to hold a snow fence
Answer:	yes
Question:	Mtb sturdy duty fence post u post 5 feet, pack of 10 says "use with 36-in fencing product." can they accommodate 48 in material
Answer:	Hi, Dillon. Yes, it will work fine for driving t-posts in clay.

Product features

Adjustable Tabs

The studded design allow you to easily attach and secure your rolled fence product to post.

Anchor

Anchor plate helps to provide support and stability

U-Channel

U-channel design for strength

Easy to Install

No digging required for installation, simply drive posts into ground using a post driver or hammer until anchor plate is below ground level.

Easy to Use

Attach the fence wire on the tabs to pull up and support the fence.

Adjust the hook when attach fence and narrow the opening after pull up.

Differe Size

There are 5 different sizes for choice from 3' to 7' U fence post to meet your difference needs.

Multiful Use

Utility fence post for use with your yard, garden, and landscape fence projects.

They are not just for building fence, it can be used in a variety of ways including as a means of straightening a tree, as part of a support lattice for low branches and as the primary supports for an espaliered fruit bush. Or use it as a sign post.

Product description

BestPro Steel Fence Post Driver can be used to install fence U-Posts and T-Posts in the ground with a minimum of effort. The 34 lbs. post driver has handles on both sides of the weighted cylinder. Place the driver over the fence post and carefully lift and release as frequently as necessary to sink the post. The weight in the driver does the "pounding".

• Heavy Duty Steel Construction With 34 Pounds Of Force Which Provides Maximum Down Pressure
• Can Be Used In A Variety Of Applications, Including Driving Fence Posts Or T-Posts Into The Ground
• Durable Powder Coated Finish Is Great For Product Visibility And Providing A Durable Metal Finish Which Is Resistant To Scratching,Fading, Chipping And Rust
• The Driver Is 23.5 Inches In Length, 14.5 Inches In Width (Handle to Handle), 6 Inches In Diameter (ID)
• Easy To Use, Durable And Requires No Assembly

Product description

"FARMEX" POST DRIVER WITH HANDLE Length. x Pipe ID: 30" x 2" Rental. With Handles Simple in design Effective in action Made of heavy gauge steel. This unit employs a pile driver movement to set posts accurately and without strain.

• "FARMEX" POST DRIVER WITH HANDLE
• Length. x Pipe ID: 30" x 2"
• Rental.
• With Handles
• Simple in design

User questions & answers

Question:	Will this work with U-Channel posts like this? http://www.amazon.com/Brady-97204-Hot-Rolled-High-Tensile-U-Channel/dp/B003XU7P2U/ref=sr_1_2?ie=UTF8&qi
Answer:	Yes and no, the stakes won’t run all the way to the top of the fence so it will fall over a bit. I’d get the larger stakes.
Question:	Where is it made
Answer:	That’s what I’m using it for and so far, not a hint of a problem.
Question:	How heavy
Answer:	We have used it on a 2x2 and fits just fine and the thickness is 1/8". You could go slightly bigger
Question:	Is this diameter large enough to put over a well point drive cap? For a garden well. Thanks
Answer:	We can absolutely do Custom Colors. The best way to let us know what is needed is to call us directly and let us know your specifications.

Product description

XtremepowerUS 52cc Gasoline T-Post Pile Driver saves you time, energy, and back-breaking motions with smoother operation and efficiency of the post driver. The versatile design of this man-machine engineering reduces the working strength load of the operator to the greatest extent, allowing the operator to achieve 360-degree multi-directional operation. The 3-1/4 in. driver barrel can fit all posts up to 3" diameter

Feature:

• The perfect tool for driving t-posts and ground rods in a wide range of garden, agricultural landscaping, geophysical exploration, and construction applications
• Powerful 52cc T-post driver delivers up to 1350 impacts per minute at 45 ft/lbs of impact force
• Ergonomic T-grip handle with the integrated throttle for 360-degree multi-directional control and dynamic operation
• Anti-vibration dampening system actively reduces working fatigue of user to the greatest extent
• Made easy-to-use with a simple recoil pull-start method; that easier than starting a lawnmower
• Blow-molded carrying case with built-in wheels and handle for easy transportation and safe storage of equipment

Specifications:

• Engine Type: 2-Stroke Single-Cylinder, Air-Cooled, Gasoline Engine
• Fuel: 87 Octane unleaded gasoline or higher
• Engine Displacement: 52CC
• Start Type: Recoil
• Fuel Tank Volume: 1.3L
• Oil Capacity: 2.71 oz(0.079L)
• Max Power: 1,500W/9000(r/min)
• Max Torque: 2.5N.m/5500 (r/min)
• Fuel Consumption Rate: <0.60L/hr
• Impact Frequency: 700-1350bpm
• Impact Energy: 20-55J
• Dimension: 11-3/4"(W) x 11-1/4"(D) x 32-3/4"(H)

Package Content:

• 52cc T-Post Driver
• 2 X Piling Heads
• 2 X Piling Sleeves
• Tool Maintenance Kit
• Carrying Case

• Widely used in the garden, agriculture, geophysical exploration, construction and more
• Portable and lightweight for easy handling and convenient transport; It is powerful enough for most heavy-duty job applications, yet lightweight for effortless control
• Max torque and speed: 2.5N.m/5500 (r/min); Max Power and Speed: 1,500W/9000(r/min)
• Displacement: 52CC (This is a EPA approve product beware of non EPA engines); Engine Type: single cylinder, air cooling, 2-Stroke
• Piling Heads Size:Ф20mm-Ф49mm, Ф50mm-Ф69mm & Ф70mm-100mm

User questions & answers

Question:	Where do you get parts at
Answer:	Inside diameter is just a shade over 2 1/8".
Question:	This item clearly states in the product description that it is a 4 stroke engine. The users manual says to use 25:1- 2 stroke fuel mix. Which is it
Answer:	Not sure because I don't know the size of the goats and whether or not they would 'charge' the fence. If you have sturdy fencing, I believe it will. My 2 dogs, doberman mix and aussie/rottie mix- each 45 -50 lbs; one has gone against the fence and tried to jump. The posts were fine---the fence? jury is still out :-)
Question:	What make is the engine ? Looks like a honda spin off
Answer:	Yes, I used it for snow fence. They are a little lighter than the standard, so if you are pushing snow up against them, they may not hold, but they would work well if you are just trying to break up drifts with the snow fence.
Question:	Does this take 2stroke fuel or regular gas
Answer:	I don't know for sure. We don't have a lot of snow in my area; however, when planted over their blades, they are very sturdy so my guess is that the answer is yes, depending on how well you get them set.