12 best jet drill press

Product description

Accuracy, stability, and versatility are the benchmark features of the JET 20" drill presses. This high quality line of JET drill presses offer a greater range in spindle speeds than other machines of this class. JET backs their machines with the industry-leading Two-Year Warranty.

A great choice for professionals as well as for home woodworkers, the Jet 354170 JDP-20MF 20-inch floor drill press spins bits up to 3/4 of an inch with 12 speeds from 150 to 4,200 rpm. It's equipped with a built-in work lamp, adjustable tension spindle return spring, and hinged metal belt and pully cover. A drill chuck and key are included, and it's backed by a two-year limited warranty.

The JDP-20MF 20-inch floor drill press (view larger).

Features

The Jet 354170's smooth-traveling table raises and lowers at the turn of a crank to exactly where you need it. And angled drilling is easy thanks to the rotating, 45-degree tilting worktable that also features a quick-release clamp. The 1-1/2-horsepower motor can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources, and it provides 12 drill speeds ranging from 150 to 4,200 rpm. To change the speed, just flip open the hinged metal cover, disengage the motor, slip the belt onto the right pulley, and you're back at work in a flash.

The 354170 has a 1/2-inch diameter external positive depth stop with three-nut locking feature for quick adjustment. It also offers an adjustable tension spindle return spring, with the spindle supported by high-quality ball bearings. Other features include an on/off switch located on front of the drill press head and a built-in work lamp (bulb not included).

What's in the Box

One Jet 354170 JDP-20MF drill press (head assembly, table, column and table bracket assembly, base), chuck and key, arbor, drift key, and operating and assembly instructions.

From the Manufacturer

The JET JDP-20MF floor model drill press is a must for medium to big drilling jobs. A powerful 1-1/2-horsepower, 115-volt motor delivers the power to the 3/4-inch drill chuck mounted up in the MT-3 spindle. Large production table, 19-by-16-inch, will hold those big pieces securely. 12 spindle speed range from 150 - 4,200 rpm and are changed by moving the belts at the top of the press.

FEATURES

• Hinged metal belt and pulley cover coupled with quick adjustment motor mount allows rapid changing of spindle speeds
• Rotating, +45 degrees tilting, crank-operated worktable with quick-release clamp
• On/Off switch located on front of the drill press head for safety
• A 1/2" diameter external positive depth-stop with dual nut locking feature for quick adjustment
• Adjustable tension spindle return spring
• Spindle is supported by high quality ball bearings
• Built-in work light; bulb not included
• Drill chuck and key included

SPECIFICATIONS

Swing (in): 20-1/2

Drilling Capacity (in): 1

Chuck Size (in): 3/4

Spindle Travel (in): 4-5/8

Spindle Distance to Base (in): 46-3/4

Spindle Distance to Table (max/in): 29-1/8

Table Size (dia/in): 18-5/8 x 16-1/8

Spindle Taper: MT-3

Column Diameter (in): 3-3/8

Number of Spindle Speeds: 12

Range of Spindle Speeds (RPM): 150 - 4,200

Base Size (in): 13-5/8 x 22-3/8

Motor: 1-1/2 HP, 1 Ph 115/230V Prewired 115V

Net Weight (lbs): 288.

• VARIABLE-SPEED: 1-1/2 HP motor has 12 speeds from 150 to 4,200 RPM.
• REPETITION: 1/2"-diameter external depth stop, with three-nut locking feature, allows for fast adjustments.
• ACCURACY: Depth stop has a quick-set bolt for fast, accurate adjustments.
• VISIBILITY: Built-in worklight (bulb not included) provides additional visibility.
• VERSATILITY: Quick-release crank-operated worktable can tilt +/- 45°.

User questions & answers

Question:	Can the direction be reversed? I want it for power tapping holes. Need to reverse direction quickly
Answer:	What you want is a self-reversing tapping attachment. Here's a video of one. https://www.youtube.com/watch?v=r1rZ_M1Qnys
Question:	Hey, would someone give me a vague measurement for the drill head alone? I'm trying to figure out if it will fit in my car. . Long story
Answer:	30" long, 10" wide and deep, about 130# Put an 800# lathe in a Volkswagen after dismantling into 3 peices by myself. 1978
Question:	What country was it made
Answer:	This Jet Floor Drill Press is made in China.
Question:	what's the difference between a jet j-2550 drill press and a jet 354170/jdp-20mf drill press
Answer:	Jdp-20mf has 1 1/2Hp motor with 110 and 220 volt depending on setup. Also has 3/4" drill Chuck instead of j2550 5/8". I can still put drill bits smaller than 1/8"in Chuck. You can call jet and ask questions. Also,I did change jet drill depth spindle stop with quick settle nut which I like.

Product description

Floor Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 In., Spindle Taper 2MT, Motor HP 3/4, Capacity Steel 1/2 In., Capacity Cast Iron 5/8 In., Drilling Capacity Wood Not Specified, Includes Chuck with Key, Power Down Feed Included No, Voltage 120/240, Amps AC 9.0/4.5, Number of Speeds 16, Chuck Size 5/8 In., Spindle Speed 200 to 3630 rpm, Spindle Travel 3-1/8 In., Base Size 11 In. x 19-1/2 In., Table Work Surface 9-1/2 In. x 9-1/2 In., Hz 60, Phase 1

From the Manufacturer

The J-2500 15" Floor Drill Press boasts a 3/4HP motor and tilting table. Simple yet powerful, the J-2500 has a cast iron head and large quill - allowing greater accuracy.

• Work table tilts 45°.
• GREATER PRECISION AND ACCURACY: Enclosed spidle assembly is supported by four permanently-lubricated ball bearings.
• TELESCOPING SPINDLE GUARD: Extend the guard as much as needed.
• 3-1/8" stroke for deep hole applications.
• 5/8" drill chuck and arbor

User questions & answers

Question:	What country is this drill press manufactured
Answer:	Great question. It’s designed in the United States. But manufactured in China. But it is of good heavy quality.
Question:	does white glove delivery indicate setting up the machine
Answer:	167 lbs you assemble it on the floor then you have one person hold down the base well you stand it up. sounds to me that 167 lbs is to much for you to lift and if soo you should probly buy a smaller one that you can lift on your own. there always a chance of knocking it over and if your too wimpy to pick it up then you could get stuck under it if it fell on you.
Question:	does this drill press have a laser
Answer:	No it does not have a laser.
Question:	does this drill have a mechanical speed adjustment
Answer:	Yes Andrew, this press has a 3 pulley head arrangement that permits 16 speed possibilities from 200 to 3360 rpm at the spindle/ chuck. This is my favorite drill press in 44 years of professional building and mill experience. Highly recommend!

Product description

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.

From the Manufacturer

The J-2530 15" Bench Drill Press boasts a 3/4HP motor and tilting table. Simple yet powerful, the J-2530 has a cast iron head and large quill - allowing greater accuracy.

• Power source type: Corded-electric

User questions & answers

Question:	Are the belts standard V belts or Serpentine belts
Answer:	Hi Rick, Drill Head Clearance without Spring and Depth Stop - Max Travel: 8.23", Minimum Drill Bit Clearance: 0.72". For your reference, please view the Drill Head Clearance Specification Sheet -http://www.milescraft.com/wp-content/uploads/2017/05/1318-DRILL-HEAD-CLEARANCES-New-Head.pdf
Question:	Can this be switched to 220 volts
Answer:	The spindle has two ball bearings in it, for accuracy. The bushings are located on the left and right side of the guide head, which is where the bars slide through.
Question:	Can you lock the quille down in position
Answer:	I've found it cannot drill through 4x4 timber. I haven't measure the stroke, probably about 2.5 inches.
Question:	Can it reverse direction
Answer:	Slightly elliptical: 3 and 1/2" (between the rods) x 3 and 7/16" at 90 degrees.

Product description

Accuracy, stability, and versatility are the benchmark features of the JET 22" drill presses. This high quality line of JET drill presses offer a greater range in spindle speeds than other machines of this class. JET backs their machines with the industry-leading Two-Year Warranty.

• variable-speed: 1-1/2 hp motor has 12 speeds from 175 to 3,050 rpm.
• "repetition: 1/2""-diameter external depth stop, with three-nut locking feature, allows for fast adjustments."
• accuracy: depth stop has a quick-set bolt for fast, accurate adjustments.
• visibility: built-in led worklight provides additional visibility.
• versatility: quick-release crank-operated worktable can tilt +/- 45°.
• Horsepower: 1.5
• Included components: Drill Press, Table, Base, Column
• Power source type: Corded Electric

User questions & answers

Question:	Does the drill come pre assembled
Answer:	Yes, the drill comes pre-assembled. It is a great drill press. We own two of them they are very accurate.
Question:	Is this machine variable speed
Answer:	Yes
Question:	Is this machine variable speed
Answer:	Yes
Question:	What type of motor
Answer:	Not sure what you mean, but its a 110 volt electric motor. the specs should tell you the horse power of the engine, as I'm not near it to tell you that. It's a nice drill press!

Product description

JET JDP-17MF 17" Drill Press (354169)

From the Manufacturer

The JET JDP-17MF floor model drill press will be a great addition to the shop. It comes wit a 5/8-inch drill chuck and a powerful 3/4-horsepower, 115-volt motor that can also run on 230-volt. 16 spindle speeds range from 200 up to 3,630 rpm. A heavy duty switch is mounted on the front of the press and a light socket is supplied in the drill head so you can see what you are doing in a dark corner of the shop (bulb not included, sorry). Another big feature is the positive depth stop that you can set so you will be consistent in drilling depth. A heavy round table with several slots will let you position your vise or jigs where you need them. The table will also swivel and can be raised or lowered. The spindle is an MT-2 so you can use MT-2 tapered bits.

FEATURES

• Hinged metal belt and pulley cover coupled with quick adjustment motor mount allows rapid changing of spindle speeds
• Rotating, +45 degrees tilting, crank-operated worktable with quick-release clamp
• On/Off switch located on front of the drill press head for safety
• A 1/2" diameter external positive depth-stop with dual nut locking feature for quick adjustment
• Adjustable tension spindle return spring
• Spindle is supported by high quality ball bearings
• Built-in work light; bulb not included
• Drill chuck and key included

SPECIFICATIONS

Swing (in): 16-1/2

Drilling Capacity (in): 5/8

Chuck Size (in): 5/8

Spindle Travel (in): 4-3/8

Spindle Distance to Base (in): 49

Spindle Distance to Table (max/in): 29-1/8

Table Size (dia/in): 13-3/4

Spindle Taper: MT-2

Column Diameter (in): 3-1/8

Number of Spindle Speeds: 16

Range of Spindle Speeds (RPM): 200 - 3,630

Base Size (in): 11-1/8 x 19-5/8

Motor: 3/4 HP, 1 Ph 115/230V Prewired 115V

Net Weight (lbs): 178

• VARIABLE-SPEED: 3/4-HP motor has 16 speeds from 200 to 3,630 RPM.
• REPETITION: Adjustable tension spindle return spring for repeat drilling to the same depth.
• ACCURACY: Depth stop has a quick-set bolt for fast, accurate adjustments.
• VISIBILITY: Built-in worklight (bulb not included) provides additional visibility.
• VERSATILITY: Quick-release crank-operated worktable can tilt +/- 45°.

User questions & answers

Question:	What is the part no. for a replacement chuck key for a jet jdp-17fse
Answer:	The washer is 1:5 in in diameter. It is not a separate washer and in integral to the attachment bolts. I suspect that mounting in a dog hole can be easily accomplished with different attachment hardware but probably not the supplied mount.
Question:	What country is this drill press manufactured
Answer:	The bolt is removable.
Question:	What is the overall assembled height
Answer:	The ring side is 1/2-20 and the clamp side is 5/16-18
Question:	Does this drill press come with a #2 or #3 morse taper
Answer:	No it won't work directly because the threaded foot on the tool does not go through. Therefore there is no way to tighten it. I have the same issue since the slots on my table do not go through. To overcome the issue I have mounted these clamps on an auxiliary table. Problem solved!

Product description

From a full 3-1/8” of spindle travel, to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. This drill press also features a one-handed belt-tensioning system and a large 12-1/2" x 17" work table.

• 12-1/2" X 17" PRECISION-GROUND CAST IRON TABLE: Features twin T-slot grooves, and four table slots.
• SPINDLE TRAVELS A FULL 3-1/8"
• ONE-HANDED BELT TENSIONING: Allows for rapid speed changes.
• DRILLING ACCURACY: X-shaped XACTA Laser ensures perfection every time.
• INCREASED VISIBILITY: LED work light increases visibility for intricate applications.

Product description

The J-A5816 15" Variable speed Floor Drill Press boasts a 1HP motor with speeds from 400 to 5000 RPM. The large 2-1/4" quill allows for greater accuracy while the 3" column promotes maximum head support.

• Speeds from 400 to 5000 RPM
• Handwheel adjustment sets the speeds
• Large 2-1/4" quill allows greater accuracy
• 3" Column diameter for maximum head support
• Full bearing support on quill for maximum spindle stiffness

User questions & answers

Question:	Is the wheel on the left side for adjusting the speed or do you have to move belts on pulleys
Answer:	"...the size of a drill press... is two times its throat depth, which is the distance from the chuck to the column. The calculation is called the unit's swing, and the number will explain the width of the cutting material that the drill press can accept. For instance, if a shopper purchases a 12-inch drill press, then he or she will have a throat calculation of six inches. Therefore, the unit can reach the middle of a 12-inch piece of material." http://www.ebay.com/gds/Drill-Presses-Buying-Guide-/10000000177632723/g.html
Question:	this does have a 6" stroke / quill travel ? correct
Answer:	Each square is 2' x 2'. I got 12 squares, and they made a 6' x 8' area. So you'd have to do the math - it will take more than 2 bundles. They are an excellent product for fight practice/workout area.
Question:	is the 15" drill press # jet 354170 model Jet Grey or White
Answer:	We have a treadmill on these pads along with hand weights and additional heavier weights. The rubber mats do not smell.....and I am very sensitive to odors. We do weights, aerobic exercises and step aerobics on these mats and have no problems.
Question:	what is the spindle taper
Answer:	It's definitely cushiony. I had to put down some plywood in between my carpet and this so that it wouldn't keep coming up and disconnecting. Works great on a hard surface though.

Product description

The J-A5818 15" Variable speed floor drill press boasts a 1 HP 230/460v motor with speeds from 400-50000 RPM. The large 2-1/4" quill allows for greater accuracy while the 3" column promotes maximum head support.

• Speeds from 400 to 5000 RPM
• Handwheel adjustment sets the speeds
• Large 2-1/4" quill allows greater accuracy
• 3" column diameter for maximum spindle stiffness
• 6" stroke for deep hole applications

User questions & answers

Question:	Why is this listed as 3 HP when Jet Tools (and everyone else) shows it as 1 HP
Answer:	It only gives on mine. 1/3 hp @ 1700 rpms. It should be 2/3 hp. Not watts or amps on the motor tag. Go to WEN website online and ask them in an email.

Product description

JET JWDP-12 12" Variable-Speed Drill Press (716000)

• MAXIMUM CONTROL: Oversized, ergonomic knobs provide ease of use.
• DRILLING ACCURACY: X-shaped XACTA Laser ensures perfection every time.
• INCREASED VISIBILITY: LED work light increases visibility for intricate applications.
• EXTRA SUPPORT: Retractable roller extension provides support and quick work piece adjustment.
• CONSISTENT DEPTHS: Clear linear scale features a depth stop.

User questions & answers

Question:	Are there any holds downs that fit in the slots of the table on this press? Or is there hardware that could be used to make hold downs
Answer:	A carriage bolt would work to make hold down.
Question:	what size is the column
Answer:	This Jet 716000 drill press has a 2-1/2" diameter column.
Question:	Does the table tilt for angled boring
Answer:	Yes, but it requires a wrench to loosen the table and rotate it.
Question:	How many come in one order
Answer:	I got six, too, but consumed one on the way home. A TX six pack of drills.

Product features

JET 12" Drill Press with Dro

When is a drill press powerful enough to tackle the big jobs, and portable enough to do it anywhere? When it's the JET 12" Variable-Speed Drill Press. A powerful 1/2-HP, 5-amp induction motor that pushes through almost anything you throw at it; over 3-1/8" spindle travel for maximum depth cutting, and our innovative X-shaped XACTA Laser that ensures drilling accuracy; makes this workhorse the best choice for in your shop or on the go.

Cast Iron Base

10" x 16-1/8" cast iron base fits neatly on work benches with limited space.

Large Paddle Switch

Large paddle switch provides easy shut off and lockout protection.

5/8" Drill Chuck

Industrial 5/8" drill chuck for multiple drilling applications.

Product description

Introducing the JET JDP-17, 17” Drill Press. From a full 5” of spindle travel, to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. This drill press also features a long-lasting, built-in LED work light to provide direct lighting while reducing shadows. A large 14" x 19" work table provides plenty of support with an edge designed for easy clamping.

• ACCOMMODATE ANY PROJECT: 14" x 19" precision-ground work table features twin T-slot grooves and four table slots.
• RAPID SPEED CHANGES: One-handed belt tensioning.
• SAFETY AND CONVENIENCE: Power switch features a safety key and large, paddle-style off button.
• REPEAT DRILLING: Integrated depth stop makes repetitive drilling quick and easy.
• STABILITY: Large cast iron base.

User questions & answers

Question:	What is the MT size of the spindle
Answer:	It has an MT-2.
Question:	Has anyone experienced the light and laser pointer not working
Answer:	YES!....I will will paste the review I made of this problem when I got mine. " Lazer, Light, and front panel control circuit board defective.: Just received my JDP-17. At first glance it is a really cool looking machine. I put it together without any problems. Three things I need to address. First, the motor works just fine, but the front led panel board that controls the power to the led light and laser is bad, part # JDP17-104. I called the customer support number and they informed me of this problem. They will send me a form via email to fill out then they will send me a new board. They said it is something I can replace, we will see about that. I am very disappointed about this. What happened here? I just spoke with JET support about when to expect my replacement part. Today is June 21. The replacement part, JDP17-104, is on backorder till AUGUST 8! Make your own conclusion. Received new circuit board on 7 16 2018. No instructions so I will have figure it out or call service for instructions. CONCLUSION: I attemped to install new circuit card and had to call the service tech to get help. He was polite and helpful and guided my install. After about an hour I was able to complete the install. This was a tech service task because it was NOT a simple push pull install. I had quite a few screws to remove, wires to cut, wires to strip, wires to reconnect. The task is completed and everything on the Drill works now. One last thing I would like to note. I spoke to three different techs during this ordeal and not one time did these techs volunteer to inform me that this circuit board replacement could be done by an authorized Jet service center for FREE. I only found out because I asked the last tech what to do if I could not install this circuit board myself. Only then did he ask where I lived and then provided me with a local service repair center. If you have this problem you should get the service repairman to do this fix.
Question:	What size T-slot kit is compatible with the table
Answer:	1/2 inch t-slot
Question:	What are the lowest and highest spindle speeds
Answer:	Low is 210 rpm and high is 3500 rpm.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

From the Manufacturer

The J-2550 20" Floor Drill Press boasts a 1HP motor and tilting table. Simple yet powerful, the J-2550 has a cast iron head and large quill - allowing greater accuracy.

• ACCURACY: 2-1/4" quill allows greater accuracy.
• SUPPORT: Large 3-5/8" diameter ground steel column and cast iron head.
• VERSATILITY: Production table tilts up to 45°.
• PRECISION: Accurate depth stop for precice hole depths.
• SAFETY: Telescoping safety spindle guard.

User questions & answers

Question:	Is there a hole in the table so that you are not drilling into the table
Answer:	Not on this model. It has t-slots.
Question:	Does the drilling deck pivot
Answer:	Yes
Question:	Can the motor on this jet j-2550 20-inch 1-horsepower be wired for 220 vac, 60 hz
Answer:	The one that I purchased is 120V only
Question:	Is the jet j-2550 1 hp or 1-1/2 hp
Answer:	1 hp.. well built machine would recommend.

Product description

Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN. DO NOT use power tools in the presence of flammable liquids or gases. Drill press Base -10 x 16 inches

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

User questions & answers

Question:	base size
Answer:	It is a lot like a car tire. Solid rubber
Question:	Does the drill press come pre-assembled? If not, how complicated is the assembly
Answer:	nope
Question:	it says 2/3HP how many amps does the motor say on its side 9 amps is 2/3HP what is on the side of the motor what watts or amps is the motor rated
Answer:	Definitely ok to use outside.
Question:	I see the spindle travel is 2" - 3 1/8" depending on model. What does the length in the name (8", 10" or 12") refer to
Answer:	Hello, Thank you for your question. The shelves are removable. Regards Ann