6 best dewalt electric brad nailer
The DeWalt Electric Brad Nailer is a popular power tool designed for fastening brad nails into various materials, such as wood and lightweight metals. Here are some key features and information about this tool:
Electric Power: The DeWalt Electric Brad Nailer is powered by electricity, eliminating the need for a separate air compressor. This makes it a convenient and portable choice for DIY enthusiasts and professionals.
Brad Nails: It is specifically designed for use with brad nails, which are thin and small-gauge nails typically used for attaching lightweight trim and moldings. Brad nails are less likely to split wood and leave smaller holes than standard nails.
Precision and Control: This nailer offers precision and control, allowing users to accurately place brad nails in their desired locations. This is especially useful for tasks like trim work and finishing carpentry.
Depth Adjustment: Many models of DeWalt Electric Brad Nailers come with depth adjustment features, allowing users to control how deep the nails are driven into the material. This helps prevent over-penetration and damage to the workpiece.
Sequential and Bump Firing: Some models offer both sequential and bump firing modes. In sequential mode, nails are fired one at a time when the trigger is pulled, providing precise control. In bump firing mode, nails are fired rapidly when the trigger is held down and the nose of the nailer is pressed against the workpiece, making it faster for larger tasks.
Jam Clearing: DeWalt nailers often include features for easy jam clearing, reducing downtime during operation.
Magazine Capacity: The nailer typically has a magazine that can hold multiple brad nails, reducing the need for frequent reloading.
Portability: As it doesn't require an air compressor, this electric brad nailer is more portable and suitable for on-site or remote work.
Safety Features: DeWalt power tools are known for their safety features, which may include trigger locks and no-mar tips to protect the work surface.
Warranty: DeWalt usually offers a limited warranty on their power tools, providing peace of mind to customers.
Please note that specific details and features may vary between different models and versions of the DeWalt Electric Brad Nailer.It's essential to read the product specifications and user manual for the specific model you are interested in to ensure it meets your requirements.
Below you can find our editor's choice of the best dewalt electric brad nailer on the market
DEWALT 5-in-1 Multi-tacker and Brad Nailer
DEWALT
Product description
The DEWALT Electric Multi-Tacker loads a variety of staples and brads from heavy duty, narrow, cable, 18-Gauge brads and 18-Gauge headless brads. Due to the variety of staples and brads that the Electric Multi-Tacker is compatible with, there are numerous applications for this tool such as installing carpet, installing sheets of insulation and attaching lightweight trim using the brads, to name a few. This tacker is bottom-loading and makes loading user-friendly
- Brand New in box. The product ships with all relevant accessories
User questions & answers
| Question: | Does anyone have an operators/owners manual? can you share it |
| Answer: | Sam's Dad. You realize that 5/8" is equal to 10/16" which is 1/16" larger than 9/16"; I wonder how your 9/16 did not fit but 5/8 did? |
| Question: | can it use 1.5 inch braid nails |
| Answer: | what size brads does it take |
| Question: | Can this use 1 inch t-nails |
| Answer: | Yes, this would work for chairs, upholstery - the staple size would allow for that. Also, the tension pressure is string enough to get through the fabric. |
| Question: | What size nails will it take |
| Answer: | No longer includes ANY staples at all. |
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
DEWALT
Product description
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Compatible with all DEWALT 20V MAX* batteries
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Tool-free selectable trigger for sequential or contact actuation modes
- Low nail lockout prevents dry firing and unwanted marks on the work material
User questions & answers
| Question: | Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails |
| Answer: | THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2". |
| Question: | Is this the same battery of 20v max drill |
| Answer: | Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools. |
| Question: | Please confirm this kit includes the charging unit, battery and bag |
| Answer: | Mine came w/ those items since it is a kit & not tool only. |
| Question: | Can i nail 2x4 with this im building a garage |
| Answer: | Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage. |
DEWALT 20V MAX Cordless Brad Nailer, 18GA, Tool Only (DCN680B)
DEWALT
Product description
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
User questions & answers
| Question: | Where do I get the end tips at |
| Answer: | That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html |
| Question: | Is the 20v battery included |
| Answer: | No, the battery was not included. |
| Question: | What is max nail length |
| Answer: | The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps. |
| Question: | Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one |
| Answer: | Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces. |
DEWALT Brad Nailer Kit, 18GA, 5/8-Inch to 2-Inch (DWFP12231)
DEWALT
Product description
The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.
- Long life maintenance-free motor to keep from staining the work surface
- Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
- Tool-free jam release mechanism for easy nail removal
- Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
- Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
- Compressor is required to use this product but is not included
User questions & answers
| Question: | Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need |
| Answer: | : A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one |
| Question: | What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor |
| Answer: | Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done. |
| Question: | Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools |
| Answer: | Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use. |
| Question: | what is the voltage |
| Answer: | The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps. |
Product features
DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit
DEWALT 20V MAX Cordless Brad Nailer, 18GA, Precision Point (DWFP12233)
Product description
Precision point technology: precise nail placement as a result of a smaller nose compared to current DeWalt nailers and No need to compress the contact trip to actuate the tool. Kit includes: nailer, 1/4" swivel fitting, sample brad nails, carrying case and extra no-mar tips.
- Tool-free depth-of-drive adjustment for proper setting of nail heads
- Rear exhaust to keep contaminates away from work
- Drives 18 GA Brad nails from 5/8" to 2-1/8" length
- Tool-free jam release mechanism for easy nail removal
- Selectable trigger: sequential or contact actuation
User questions & answers
| Question: | How much pressure required to trugger |
| Answer: | I don’t know about minimum but it works fine at 90-100. |
| Question: | Is this Oil-free |
| Answer: | Yes oil free... the piston ring and cylinder are both made of Teflon... oil will destroy the gun. |
| Question: | This Nailer is sold with a case |
| Answer: | Affirmative a nice hard case |
| Question: | Does it come with a case |
| Answer: | Yes holds instruction book and gun very little room for nails |
DEWALT Air Compressor Combo Kit with Brad Nailer (DWC1KIT-B)
DEWALT
Product description
The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability. Kit includes: DWFP12231 18 ga Brad Nailer, DWFP55126 Compressor, Air hose with fittings, sample fasteners, and owners manual.
- DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
- DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
- Tool-free depth-of-drive adjustment and tool-free jam release
- Low 75.5 dBA for a quiet work environment
- Kindly refer user manual for instructions.
- DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
- DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
User questions & answers
| Question: | what is HP |
| Answer: | These products are not rated in HP. |
| Question: | Can i use 200 feet of air house will the compressor take it |
| Answer: | It's not advisable to use such a long air hose, even if it would work. It would be useful to inquire about a long electrical extension that would go at least half way. A qualified electrician could shed some light on this (pun intended). I wouldn't do either; there is some risk in running electrical wire or an air hose under pressure such a long distance. |
| Question: | Is this good for crown molding and flooring installs with it support for what I am looking to do |
| Answer: | Ideally you will want a finish nailer for crown molding work. Please contact DEWALT at 1-800-433-9258 for further assistance. |
| Question: | What is the length of the included hose |
| Answer: | I haven't measured it but I'm thinking it's probably a 25' |
Product features
DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit
The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability.
Kit Includes:
Latest Reviews
View all
Microphone For Amazons
- Updated: 28.03.2023
- Read reviews
Dehumidifier For The Basement
- Updated: 16.07.2023
- Read reviews
Disinfecting Wipes For Babies
- Updated: 09.05.2023
- Read reviews
Desktop Radio
- Updated: 20.07.2023
- Read reviews
Canon Airprint Printers
- Updated: 28.04.2023
- Read reviews