7 best general tools woodworking tools

Product description

This highly accurate digital angle finder offers easy-to-read measurements via a large LCD display and has an 8" stainless steel blade and steel locking knob. It is ideal for measuring, storing and transferring inside and outside angles when building cabinetry, furniture and picture frames.



The General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One offers pioneering technology that takes the guesswork out of angle duplication and eliminates the problems associated with manual measurement transfer.



DETAILS:

• Large LCD
• Four control buttons provide five functions: Power on/off, Reading hold, Read reverse angle, Flip display, Clear readout
• Auto power off
• Stainless steel blade
• Impact-resistant ABS handle
• Power source: "CR2032" Lithium-ion battery (included)

SPECIFICATIONS:

• Range: 0 to 360°
• Accuracy: ±0.3°
• Resolution: 0.05°
• Blade length: 8 in.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT.



Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.



For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction guaranteed.



WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DURABLE - Commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle
• HOLDS MEASUREMENTS- on digital angle finder for transfers between different surfaces or jobs
• TRANSITIONAL DISPLAY - Digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Full LCD display with large digital angle readout.
• AUTOMATIC SHUT-OFF- feature that preserves battery life of the woodworking tool
• DUAL APPLICATION - T-bevel/digital protractor combo- is made with an ergonomic impact resistant handle with 8-inch stainless steel blade used for taking measurements

User questions & answers

Question:	Hi, can i make some reset? the read its not logical
Answer:	Yes
Question:	Can you tighten down the t-bevel to hold the angle
Answer:	Hi Jesse. I'd have to say yes. It does read down to 0.1 degrees (1/10th of a degree) I find it easy to zero out (long press on the 'On' button), and can even rev. the display, from 45 degrees, to 135 degrees. Which I often do. The battery lasts an extremely long time, though I do keep a few spares. Others have complained about the knob, moving the displayed reading while tightening it on the angle to be read. But as you may likely already know, the key here is to just simply keep the knob snug enough to stay, yet just loose enough to move to the angle you are trying to find on your block of aluminum, or whatever. I use it most often on bending polished ornamental metals, and do need to land on 1/2 degree increments from time to time. I Love this thing!
Question:	Can this be used to set accurate angles on table and miter saw blades
Answer:	theres a button opposite the battery I guess that aids in opening the battery holder. I just ooch it in enough to break the connection and make it turn off
Question:	What kinda battery goes in here? I am on a remote island and damn... i overlooked the 'yes' in the product info
Answer:	On the metric side of the ruler close to the read out display push the little tab and battery compartment should slide out on the opposite side , battery installation + side down , takes one CR 2032 battery.

Product features

Digital Sliding T-Bevel & Digital Protractor in One

The Digital Sliding T-Bevel Protractor can measure, set and transfer interior and exterior angles quickly and accurately. This tool is ideal for measuring, storing and transferring inside and outside angles when building cabinetry and furniture, creating picture frames, installing tiles and more.

Product description

General Tools 861 EZ Pro Dovetailer 2 Dovetail Jig is the all-in-one answer to producing strong, precise dovetail joints with ease right out-of-the-box. Using only the jig and a handheld or table router, both professionals and novices can make half-blind or through dovetail joints including box joints. The self-aligning design ensures that both ends of the dovetail joint match up evenly every time, and new table router control knobs promise comfortable and accurate use. THE DOVETAILER is fully portable, includes a 1/2" dovetail router bit and features sturdy machined aluminum construction along with integrated clamps for precise attachment to the work piece. It is perfect for furniture building, cabinet making and other carpentry projects.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• WOODWORKING MADE EASY- All-in-one 861 Dovetail Jig produces strong, precise dovetail joints right out-of-the-box quickly and easily
• SELF ALIGNING DESIGN- Ensures that both ends of the dovetail joint match up evenly every time
• ADJUSTABLE- Can accommodate boards of any width and easily adjusts the dovetail interference to create loose or tight joints
• DURABLE- One-piece aluminum construction with integrated clamps allow precise clamping of jig to work piece while the table router control knobs assure safe, comfortable and accurate use
• INCLUDES: 861 Dovetail Jig & 14-degree, 1/2 -inch dovetail router bit for use with hand table or table router

User questions & answers

Question:	Can it be used to cut a rabbeted drawer front? That is a drawer front with a lip on the sides to hide drawer slides
Answer:	It is EXACTLY the same as harbor freight. I know because i have one. I'm going to return it. It's doable , but it's cheap. I usually have no problem with cheap tools from harbor freight, but this design is just too sloppy.
Question:	Is the scale at the front in mm or inch
Answer:	Yes, of course. The instructions are very difficult to understand, but complete. Take a lot of cheap scraps, the same thickness as the final piece, and start cutting. Take extensive notes .
Question:	Is this jig take 14 degrees or 10 degrees or 8 degrees bit
Answer:	Hello and thank you for the question. Here is a link to the manual: https://www.woodstockint.com/products/D2796 . If you need further assistance, please contact Technical Support at 1-800-840-8420 ext. 2, or by e-mail at [email protected]. Thank you!
Question:	does anybody know what the main differences are between this jig and the "General Tools 860 dovetailer EZ Pro dovetail Jig" (cheaper one
Answer:	Yes you can cut through dovetails

Product description

A practical tool for measuring and duplicating difficult angles where a standard protractor or t-bevel cannot fit. The Protractor works on outside, inside and sloped angles from 0 to 165 degrees. The four-piece design adds additional versatility for measuring particularly difficult angles. Fine black graduations from 0 degree to 80 degrees in opposite directions. Brass lock nut.

From the Manufacturer

Transfer odd angles to your miter saw. Use this plastic protractor/angle finder to measure and mark the degrees of an angle on outside, inside and sloped angles. Fine black graduations from 0 to 90 degrees in opposite directions. Brass lock nut.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• INSIDE, OUTSIDE AND SLOPED ANGLES - this plastic protractor/angle finder measures inside, outside and slope angles.
• FOUR PIECE STURDY DESIGN – with brass lock nut
• TRANSFER ANGLES – with this plastic protractor, you can transfer odd angles to your miter saw
• FINE BLACK GRADUATIONS – from 0° to 180° in opposite directions
• VARIOUS PROJECTS – protractor/angle finder is ideal for construction jobs, cabinet-making and fine carpentry, where a standard protractor or t-bevel won't fit

User questions & answers

Question:	Does it work for trim
Answer:	Yes of course you can reset the reading, are you measuring angles? Because this is what the tool is used for either measuring an angle or setting and angle to cut. Hope this helps!
Question:	How do you use the "0,30,60" measurement markings above the reading area
Answer:	Yes. Just tighten the thumb screw and it holds the angle.
Question:	what is this material made of
Answer:	Yes...depending on the adjustments of your table/miter saw this should suffice to measure the angles.
Question:	does this tool work so that you can get an angle and then it will let you know the degree on saw
Answer:	The battery is CR2032 3V Lithium. When you open the unit the battery should have the number stamped on it.

Product features

General tools plastic protractor & angle finder, adjustable arms 0° to 180°

The #29 Plastic Protractor by General Tools is perfect for all your angle needs! Measure and mark inside, outside and sloped angles with ease. Never be on construction jobs, home improvement or woodworking projects without it!

Product description

General Tools 850 Pocket Hole Jig kit is loaded with features that make it simple for anyone to use – If you have been building wood projects for years or this is your first time. This pocket jig kit includes the jig with a built-in clamp, a 3/8-inch bit, drill step, 6-inch square drive bit, 48 square drive self tapping screws, and 24 wooden pocket hole plugs all in a hard molded carrying case. Pocket hole joints are ideal for leg and rail connections, cabinet construction. sneaking screws into tight squeeze spots or fastening picture frame miters. GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1, 000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS.

From the Manufacturer

The pocket hole jig kit includes the jig with clamps, a 3/8-inch bit, drill step, 6-inch square drive bit, square drive self tapping screws, and wooden pocket hole plugs all in a hard molded carrying case. Pocket hole joints are ideal for leg and rail connections, cabinet construction. sneaking screws into tight squeeze spots or fastening picture frame miters.

• COMPLETE POCKET HOLE JIG SYSTEM - Jig kit includes: pocket hole jig with clamp, #32 3/8 In. Step Drill Bit (replaceable), 3/8 in. steel stop collar, Hex wrench 6 in. square drive bit, 24 coarse square drive screws, 24 fine square drive screws, 24 wooden pocket hole plugs, Hard plastic carrying case.
• ACCURATE- this jig creates flush, corner and angle pocket hole joints for leg-and-rail connections, building face frame cabinets, sneaking screws into tight spots, and fastening picture frames with unlimited applications
• EASY TO USE- DIYers and expert craftsmen turn to this jig kit to build their woodworking projects. First, use the jig to drill steeply pitched counter bores in one joint member; then, drive self-tapping screws (without pilot holes) into the other member
• VERSATILE- built to be portable or bench mounted and designed with a built-in clamping system
• COMPLIANT- with Forest Stewardship Council (FSC)
• LIFETIME WARRANTY

User questions & answers

Question:	Do kreg screws fit in general pocket jig holes
Answer:	Depends on the size. Buy a ruler, learn how to use it, fully engage cranal cavity.
Question:	Doea jig only also include the bit
Answer:	Yes. Has everything you need except the wood! It is a great tool.
Question:	is this adjustable
Answer:	What do u mean about adjustable? If ur meaning thicker wood than no but u can adjust the depth of the drill bit that's it....if I bought another one I would spend the money on the kreg gig...
Question:	What is the width measuremment of the clamp space? Basically how thick of a piece of wood will fit between the clamp walls
Answer:	It's roughly 2 inches. A standard 2x4 fits and there is a small gap.

Product features

Sneaking Screws Into Tight Spots

Makes Corner, Angle and Flush Joints

Will Accept Work Pieces Up To 1 1/2" Thick

Product description

Review

Jim Kingshott has made furniture for the British Royalty for many years and has more than 50 years experience at using hand planes. In this DVD Kingshott shows viewers the various planes that he has in his collection. He puts the planes to work showing how to use them and they include rebate, grooving, molding, fillister, compass and many more. The author puts these planes to work in his modest shop and has plenty of tips and advice to offer you in this 90 minute video.

About the Actor

Jim Kingshott has made furniture for British royalty, and for many years was master of apprentice cabinetmakers for the Royal Air Force. Jim explains tools, techniques and traditions in a friendly conversational style that everyone can understand. In these beautifully produced videos Jim welcomes viewers into his own small, tool-filled workshop. He passes along the skills and secrets that were handed down to him, and he freely shares the insights gained during 50 years at the workbench.

User questions & answers

Question:	looks identical to the Shinwa protractor, is it the same one with a different name or a cheaper knockoff
Answer:	What does a Shinwa Protractor look like.
Question:	What are the dimensions of the bar
Answer:	The bar, from the pivot point to the extremity is 150 mm long, 15 mm wide and about 1.5 mm thick made of stainless steel The angle measuring plate measures 90mm by 52mm.
Question:	Are the edges of the protractor rectangular plate with the graduation truly square?. Can you use any edge adding 90 degrees when using the sides
Answer:	First question answer is yes, I checked mine at 90 degrees and 45 degrees. Second question answer yes, I have drawn two lines parallel using each side of the protractor arm. The markings run left to right to left and left to right on two levels. Trust this explanation has answered your questions.
Question:	Will this lay flat on a table, even with the wing nut
Answer:	The square head will lay flat on a table surface, the square head measure read plate is 1.22mm or 3/64'' thick thus leaving the measure indicating arm that much above the surface.Hope this answers the question and is helpful. Oscar

Product features

General Tools 17 Square Head Metal Protractor

- Made of ground stainless steel for optimum accuracy.

- Permanently etched graduations from 0 to 180° in opposite directions.

- Adjustable protractor arm locks into desired position with knurled thumb nut.

- Length of adjustable protractor arm: 6 in.

- Head dimensions: 3-3/8 x 2 in.

Product description

General Tools 833 10 In. Contour Gauge can duplicate any shape instantly. This profile gauge creates an instant template for curved and odd shaped profiles simply and easily. Never transfer profiles to paper or cardboard again. The contour gauge makes measuring and cutting easy. Reminiscent of a hair comb, the tool—also known as a profile comb—features a row of long, thin, moveable teeth and a perpendicular housing that holds them in place as they take an impression of the surface. The 10" long contour gauge is ideal for measuring moldings for reproduction, duplicating spindles on the lathe, fitting flooring around moldings, copying curves and a variety of other contour matching jobs around the home and shop. Two 10” gauges can be combined to measure and duplicate larger shapes. It fits around most common pipes and round columns and allows you to easily copy shapes to tile, laminate, engineered wood, solid wood and vinyl flooring to precisely cut flooring to match objects. The gauge eliminates the guessing of dimensions of irregular shapes. The tool features 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm). Made of tough, durable plastic, the gauge will not harm the original finish of the shape being duplicated and has four magnets on the back for easy storage. GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS **833 CONTOUR GAUGE TOOL COLOR MAY VARY FROM PHOTO SHOWN**

• PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipes
• PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
• EXTRA LENGTH- 10” gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential. Two tools can be combined when 20” base is needed
• DURABLE- Made from tough, durable plastic that will not scratch the original finish of the shape being duplicated or rust
• EASY TO USE AND STORE- Simply press the tool’s teeth onto a shape and trace. Four magnets on the back allow for easy storage

User questions & answers

Question:	looking to use this to profile guitar necks. My first gauge is too stiff and the ends are sharp leaves scratches, will this have the same problem
Answer:	Works great.You fit it around whatever object that needs a good fit, usually something with an odd shape. Then lay it on you wood, trace the pattern & cut it out whether saw or router.
Question:	when you use the contour guage, does it lock the pins so the shape doesn't change when you move it
Answer:	yes, this shape duplicator can be used in house renovation like carpet cutting, shape transfer and so on.
Question:	Can it be connected to another to make a longer one
Answer:	The core is a aluminum core.
Question:	The 6 inch metal version has 35 needles per inch. Does anyone know how many needles per inch this one has
Answer:	the one I have is roughly about 2 inches