13 best wen scroll saw blades

Product description

WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.



OLSON SAW FR49501 Pin End Scroll Saw Blade,18 Pack

For machines that require 5" Pinned blades. Perfect for Sears Craftsman, Penn state, Delta, Ryobi, all 15" And 16" Imported scroll saws. Contains 6 each of 42401, 41101, & 41201. Blister carded assortment. 18 Pack contains 6 each of 42401, 41101, & 41201 for machines that require 5" Pinned blades Perfect for Sears Craftsman, Penn state, Delta, Ryobi, all 15" And 16" Imported scroll saws # 42401 - 0.070 wide, 0.010" Thick, 18.5 TPI & cuts in wood, plastic and extremely thin cuts in material 3/32" To 1/2" Thick # 41101 - 0.100 wide, 0.018" Thick, 15 TPI & Wallboard, Pressed wood, wood, felt, paper, Bone, lead # 41201 - 0.100 wide, 0.018" Thick, 10 TPI & for hard/soft wood and plastic blister carded assortment.

• Product 1: Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Product 1: Variable speed goes from 400 to 1600 strokes per minute
• Product 1: Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Product 1: Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Product 2: The product is Easy installation and easy handling
• Product 2: The product is manufactured in USA
• Product 2: The product is easy to use and highly durable
• Product 2: Cuts in hard/soft wood and plastic

Product description

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

User questions & answers

Question:	Is the pinless adapter upgraded in this model
Answer:	Yes
Question:	What’s the difference between this and the
Answer:	The difference is toolless or tooled blade changes. That's the only difference I found in the 2 units.
Question:	What blades are you all using
Answer:	I use spiral blades which, unlike regular flat blades, you can cut by pushing and pulling your piece being cut.
Question:	I am new to scroll saws so have to ask. Is it worth the $40 difference in price for the 3921 over the 3920 and why
Answer:	this model(3921) replaces the 3920, they added a few features and the pinless clamps to the mix. the price difference is for the design changes and the extra pieces they add. 3921 is better than the 3920 when you count in the extra features.
Question:	does it come with sand paper
Answer:	Ours didn't. But just cut a full sheet in half and half again. Love how well it works.
Question:	is it ok to use on an old desk? I am concerned about the circar pattern of this sander, I won't be able to follow the grain of the wood
Answer:	It's a small orbit, about 1/16", like a vibration. For $30 give it a try. If you use fine paper on the last pass and move the sander in the directionof the grain, should be ok. I think it's agreat little tool.
Question:	What about the cutted sections in the sandpaper
Answer:	Hi, Put the sandpaper section on the sander. The sander came with a black square item that has spikes. Push the sander over the spikes and the holes in the sandpaper will appear. Also the holes are only needed if you want to collect the dust in the bag. I do not use the collection bag.
Question:	Where do I find refills online for the 1/4 sheet
Answer:	What is "Full Sized Sheet"? , I see 8 1/2 x 11 and 8 x 10.

Product features

BLACK+DECKER BDEQS300 1/4-Sheet Orbital Sander

The BLACK+DECKER BDEQS300 1/4-sheet orbital sander is ideal for finish sanding and detail work around the house. This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal. This sander offers high-performance dust collection to provide a clean work surface.

Versatile

This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal.

Convenient

This sander features paddle switch activation for easy on/off during application.

Ergonomic

With a compact size and ergonomic design, this sander can get into tight spaces and maximizes user control.

Efficient

Ideal for detail work and finish sanding, this sander also offers high-performance dust collection to provide a clean work surface.

Beveling Table

The spacious table features a 16-inch depth for cutting large workpieces and bevels up to 45 degrees to the left.

Blade Variety

Whether your preference is pinned or pinless blades, the WEN 16-inch Variable Speed Scroll Saw handles them both.

Variable Speed

Variable speed can be adjusted anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.

Flexible Worklight

The flexible worm work light can be adjusted and moved to illuminate workpieces of any shape and size.

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with the WEN 16-Inch Variable Speed Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16. 25-by-10-inch table bevels up to 45 degrees for angled cuts. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. There’s no need to fret about blade changes - the included blade holder accepts pinned, pinless, and spiral blades while the unique side panel swings open for easy access to the bottom blade holder. This package includes one 15 TPI pinned blade, one 18 TPI pinned blade, and one 18 TPI pinless blade. And because its a WEN product, your scroll saw comes backed by a two-year , a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Unique side panel flips open for easy-access blade changes
• Variable speed goes from 550 to 1600 strokes per minute
• Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades

User questions & answers

Question:	How well would this do with cutting corrugated plastic a.k.a coroplast
Answer:	Honestly probably pretty well. I use mine to cut everything from 1/8 inch plexiglass, to 2x4’s with out a problem. Not a bad little machine honestly. When cutting something such a 2x4 blades wear out pretty quick but with the thin stuff they last awhile.
Question:	What is the actual size of the saw
Answer:	26-3/8" x 13" x 14-3/4"
Question:	Have a new 3922 scroll saw. Upper and lower pinless blade holders wont pinch together to hold the blades. Wen are you going to back up your saw
Answer:	You have to make sure they are the correct length and it does take some work getting them in properly. It too two people to load mine.
Question:	what is the difference between the 3921 and
Answer:	These two units are almost identical. The only differences are that the 3921 includes a flexible work light and a blade storage compartment on the side, while 3922 features a special side panel that folds open for easy clean up and blade changes. Also, the 3921 uses the two-direction adapter system for holding blades (better for pinned blades), while the 3922 uses a standard blade holding system (better for pinless blades).

Product features

Accurate and Sharp

This precision scroll saw by WEN can seamlessly cut through materials, displaying top performance. With utmost accuracy, you will be able to experience the sharpest and fastest blades with the WEN 3922 16-inch Variable Speed Scroll Saw

Ideal for Detailed Cuts

If you want to cut materials like hard wood, the WEN 3922 16-inch Variable Speed Scroll Saw is ideal for DIY applications. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. A unique side panel flips open for easy-access blade changes with this scroll saw.

Product description

WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.



SKIL 80181 Scroll Saw Blade Set, 18 Piece

Skil brand of scroll blades are designed for the professional Craftsman who needs sharp, long lasting blades. These blades are precision sharpened for easy cutting of fine, intricate shapes. Offered in a variety of TPI and widths, these blades are recommended for cutting most woods, plastics and non ferrous metals. Skil carries both pinned and plain style to meet the user's needs in whatever type of scroll saw they might have.

• Product 1: Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Product 1: Variable speed goes from 400 to 1600 strokes per minute
• Product 1: Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Product 1: Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Product 2: Includes: with 15 teeth per inch, with 18.5 teeth per inch, 20 teeth per inch
• Product 2: Pack quantity: 18
• Product 2: Made from premium steel for longer life
• Product 2: Precision sharpened for easy cutting of intricate shapes

• The product is Easy installation and easy handling
• The product is manufactured in USA
• The product is easy to use and highly durable
• Cuts in hard/soft wood and plastic
• For machines that require 5" pinned blades

User questions & answers

Question:	Can you cut sheet metal
Answer:	To my knowledge you can't cut metal with these blades.

Product features

5-in. Pin End Blades Assortment

Description:

• 6-each: 41101- .100in. wide x .018in. thick,
• 15TPI, Regular Tooth, 41201- .100in. wide x .018in. thick,
• 10TPI, Regular Tooth, and 42401- .070in. wide x .010in. thick,
• 18.5TPI – Skip Tooth.

For machines that require 5in. pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, and all 15in. and 16in. imported scroll saws.

Product description

uy

• The product is Easy installation and easy handling
• The product is manufactured in USA
• The product is easy to use and highly durable
• Cuts in hard/soft wood and plastic
• For machines that require 5" pinned blades
• Contains 6 each of FR42401, SC41101 and SC41201

Product description

Olson's Precision Ground Teeth (PGT) scroll saw blades are the finest on the market - they outperform and outlast all other blades! Razor-sharp teeth cut faster, smoother and more accurately in both straight and radius cuts. Features: Olson PGT blades are 5" long with plain ends Made of the finest carbon steel for maximum strength, durability and long blade life Unique tooth geometry and widely spaced gullets minimize burning and give you rapid chip removal

• Sharpest, fastest cutting teeth
• Most accurate scroll saw blade ever made
• Double tooth for top performance in hardwoods
• Package Weight: 0.023 kilograms

User questions & answers

Question:	How long are these blades, will they fit a delta scroll saw
Answer:	8.5 x 3.5 x 1 in . Almost all blades fit almost all scroll saws.
Question:	Will these blades fit in an 18” porter cable scroll saw
Answer:	Some porter cable saws accept both plain and pin end blades. Without knowing the model # I cannot say for sure, but I am guessing it will.
Question:	Will these fit the Dewalt DW788 scroll saw
Answer:	These are 5" plain end blades so they will fit .
Question:	Are these pinned end blades
Answer:	No they are not pinned.
Question:	Does this saw come with a stand
Answer:	NO! Even though Delta and DeWalt are very similar, The DeWalt stand has to be adapted to fit the Delta saw. Takes a few minutes.
Question:	What is the 'thing' on left side? How easy to change blade, need a tool? Disappointed no light, any available
Answer:	That black tube thing on the left is an adjustable hose that blows puffs of air (generated I think from the up and down motion of the upper arm) which will help keep your lines clear of sawdust. Changing blades is a snap, simply loosen the thumb / wing screw on the top arm and the lower holder and slide out the blade. As for the light, I make due with a shop lamp that I have hanging from the ceiling of my garage. You can check woodcraft or rockler for magnetic portable lamps that may stick to the saw somewhere - not sure if its magnetic everywhere, never tried
Question:	The saw is great but I can not get the hold down to stay in place. I move the wood and it also moves. Any thoughts
Answer:	I removed mine even though it held just fine as I found that it got in my way. This was after I'd gotten used to the saw and the forces involved. I haven't had an issue using it without the hold down, but you have to do the holding down.
Question:	There's such a price difference, what's the main difference between this saw and the dewalt dw
Answer:	Only difference is some of the outside sheet metal, the inner workings are the same. You are paying for the Dewalt name. They both used to owned by the same company.

Product features

LOW VIBRATION, HEAVY DUTY CONSTRUCTION

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOW VIBRATION & BUILT TO LAST

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. · On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

ENORMOUS CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

HUGE CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

AND MUCH MORE

Double tooth for top performance in hardwoods!

18-pack Assortment. Precision Ground Tooth PGT Scroll Saw Blades are the best blades available! Tested and endorsed by experts, PGT blades outperform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts.

Unique tooth geometry

A unique tooth geometry and widely spaced gullets minimize burning. Made of the finest carbon steel for maximum strength, durability and longest blade life.

For scroll saws that take plain end blades

Reverse Tooth blades work best with 1-2 reverse teeth showing above the table on the upstroke! Adjust blade in holder or trim when necessary.

Product description

SKIL scroll blades are designed for the professional craftsman who needs sharp, long lasting blades. These blades are precision sharpened for easy cutting of fine, intricate shapes. Offered in a variety of TPI and widths, these blades are recommended for cutting most woods, plastics and non ferrous metals. SKIL carries both pinned and plain style to meet the user's needs in whatever type of scroll saw they might have.

• Includes: (12) with 28 teeth per inch, (12) with 11.5 teeth per inch, (12) 9.5 teeth per inch
• Pack Quantity: 36
• Made from premium grade steel for longer life
• Precision sharpened for easy cutting of intricate shapes
• Recommended for sawing of all woods, plastics and non-ferrous metals, Fits most major brand scroll saws

User questions & answers

Question:	Can I cut 26 - 18 gauge copper sheet using the finest blade (28 teeth/inch
Answer:	I'm sure you could. I wouldn't want to try to a lot of it, but small batches should be fine. I expect the worst that would happen would be copper build up in the teeth.
Question:	Will these blades work on a 15" value craft scroll saw
Answer:	The short answer is Yes, the size of stroke is what is important. The 15" is the throat size or how big the material is. The blades should be 5 inches.
Question:	will it work on the skil
Answer:	No, it will not.This blade is for scroll saw. No for Orbital Cut Jig Saw. Skil 4390 is a Cut Jig Saw, is't it ?
Question:	What Number size are these??? #2 #5 etc
Answer:	The 80182 blades do not have a number rating. It will include (12) 28 teeth per inch, (12) with 11.5 teeth per inch, (12) 9.5 teeth per inch plain ended scroll saw blades. If you have further questions, please feel free to contact us at 1-877-SKIL-999 (1-877-754-5999). We're here to help!

Product description

Skil brand of scroll blades are designed for the professional Craftsman who needs sharp, long lasting blades. These blades are precision sharpened for easy cutting of fine, intricate shapes. Offered in a variety of TPI and widths, these blades are recommended for cutting most woods, plastics and non ferrous metals. Skil carries both pinned and plain style to meet the user's needs in whatever type of scroll saw they might have.

• Includes: with 15 teeth per inch, with 18.5 teeth per inch, 20 teeth per inch
• Pack quantity: 18
• Made from premium steel for longer life
• Precision sharpened for easy cutting of intricate shapes
• Ideal for cutting wood and plastics

User questions & answers

Question:	will these blades fit a wen
Answer:	Yes they will i am using them for the same scroll saw
Question:	Would this work on a old amd saw? it requires 5 7/8" to 6 1/8". also needs pins. thanks
Answer:	no
Question:	Do I need to use lubricant on the blades to stop them from breaking
Answer:	Can't imagine lube would heip just make a big mess... I never break a blade so don't know what would help..
Question:	are these blades 5 inch
Answer:	yes these were 5 in blades.

Product description

WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.



OLSON SAW PG49802 Precision Ground Scroll Saw Blade

Olson's Precision Ground Teeth (PGT) scroll saw blades are the finest on the market - they outperform and outlast all other blades! Razor-sharp teeth cut faster, smoother and more accurately in both straight and radius cuts. Features: Olson PGT blades are 5" long with plain ends Made of the finest carbon steel for maximum strength, durability and long blade life Unique tooth geometry and widely spaced gullets minimize burning and give you rapid chip removal

• Product 1: Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Product 1: Variable speed goes from 400 to 1600 strokes per minute
• Product 1: Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Product 1: Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Product 2: Sharpest, fastest cutting teeth
• Product 2: Most accurate scroll saw blade ever made
• Product 2: Double tooth for top performance in hardwoods
• Product 2: Package Weight: 0.023 kilograms

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with a pack of WEN Scroll Saw Blades. This set includes one dozen 5-inch scroll saw blades. Our skip-tooth design perfectly handles hardwood and soft metals. The #5 style blade measures in at .0142 inches in thickness with a .0402 inch width and 16.9 TPI. Our universal 5-inch length is compatible with the majority of scroll saws on the market, including the entire line of WEN Scroll Saws.

• Includes one dozen premium pinless scroll saw blades
• Skip-tooth design perfectly handles hardwood and soft metals
• #5 style blade measures in at .0142 inches in thickness with a .0402 inch width
• Features 16.9 teeth per inch
• 5-inch length compatible with the majority of scroll saws on the market, including all WEN Scroll Saws

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with a pack of WEN Scroll Saw Blades. This set includes one dozen 5-inch scroll saw blades. Our modified geometry design allows for fast and accurate cuts with minimal burning. The #3R style blade measures in at .0126 inches in thickness with a .0335 inch width and 12.4 TPI. Our universal 5-inch length is compatible with the majority of scroll saws on the market, including the entire line of WEN Scroll Saws.

• Includes one dozen premium pinless scroll saw blades
• Modified geometry design allows for fast and accurate cuts with minimal burning
• #3R style blade measures in at .0126 inches in thickness with a .0335 inch width
• Features 12.4 teeth per inch for a smooth, splinter-free finish
• 5-inch length compatible with the majority of scroll saws on the market, including all WEN Scroll Saws

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with a pack of WEN Scroll Saw Blades. This set includes one dozen 5-inch scroll saw blades. Our reverse skip-tooth design perfectly handles hardwood and soft metals with a smoother finish. The #7R style blade measures in at .0157 inches in thickness with a .0488 inch width and 13 TPI. Our universal 5-inch length is compatible with the majority of scroll saws on the market, including the entire line of WEN Scroll Saws.

• Includes one dozen premium pinless scroll saw blades
• Reverse skip-tooth design perfectly handles hardwood and soft metals with a smoother finish
• #7R style blade measures in at .0157 inches in thickness with a .0488 inch width
• Features 13 teeth per inch for a smooth, splinter-free finish
• 5-inch length compatible with the majority of scroll saws on the market, including all WEN Scroll Saws