13 best masonry blades

Product description

The DeWALT DW4712B 7", high performance masonry blade is a high quality blade intended for cutting brick & masonry material. It features a 5/8" diamond knock out arbor for a faster cut rate at constant depth which minimizes dust with thinner kerf. It lasts up to 30 times longer than abrasive blades and is for use o n 7" & 7-1/4" circular saws.

• The product is 7", high performance masonry blade, 5/8" Diamond knock out arbor
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Does this work for cutting slate pieces
Answer:	It will a variety of masonry pieces including slate.
Question:	can I use this 7 inch blade in a 71/4 inch circular saw
Answer:	It will work as normal however the depth will be 1\4 inch less.
Question:	Do you need to cut concrete wet or can it be cut dried? My only concern is electrical shock with a circular saw
Answer:	I cut 32' of concrete with a circular saw to a depth of 2-1/2" with this blade and did it without water. The blade shows little wear.
Question:	will this blade work on an asphalt driveway
Answer:	I cut out a section of asphalt with this. Cut through easily. Also cut 2 inch pavers and old kiln fired brick. Pavers cut easily, brick was tough but got through that too. Helps to squirt the blade with water while cutting to reduce heat and dust.

Product description

Diamond masonry blade - high performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal. Thinner kerf to increase speed of cut while minimizing dust. Applications dry cutting Block, masonry Siding products and other masonry materials. Faster cut rate at a constant depth. Ideally used on thinner and softer masonry materials.

DeWalt's 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

From the Manufacturer

DeWalt DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

• The product is 4-1/2" HiPerf MAS Blade
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will this fit the cordless dewalt 4 1/2 dcg412? thanks
Answer:	It will fit any 4 1/2". Cord or no cord is irrelevant.
Question:	Will this grid carbide bits
Answer:	This a Diamond Saw Blade, its used to cut tile, brick, concrete, Masonry type work. Not intended for cutting metal. I cut tile and concrete with mine.
Question:	Will this fit a DeWalt model D28402W
Answer:	Yes, you can use this with the DW402 but you need to get the DW4706 Backing Flange. Amazon sells it for $2.99 as an add-on item. You need this flange for any type 1 cutting wheel used on a type 72 grinder (cupped surface disks). BTW, the arbor is 7/8" for disks that don't screw on, and 5/8" threads for those that do screw on. Hence you need cutting disks, like this one, with a 7/8" arbor. This applies for all grinders, not just Dewalt.
Question:	Will this blade cut cast iron pipe
Answer:	it will cut steel but it will wear it out very fast . i am a mason and cut rebar with these blades all the time . not sure about cast iron but softer steel they will cut although they are not intended to be used for that

Product features

Diamond Saw Blade

High Performance diamond matrix provides longer life and enhanced material removal with a thinner kerf to increase speed of cut while minimizing dust. Used in applications such as cutting block, masonry siding products, and other masonry materials.

• High Performance diamond matrix provides more life of conventional abrasives and enhanced material removal.
• Thinner kerf to increase speed of cut while minimizing dust.

Product description

DEWALT DW4712 High performance 7-inch dry/wet cutting continuous rim diamond saw blade for block and brick

From the Manufacturer

DW4712 High Performance 7-Inch Dry/Wet Cutting Continuous Rim Diamond Saw Blade for Block and Brick

• The product is 7", high performance masonry blade
• Easy to use
• The product is manufactured in China
• High performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will it fit a dewalt angle grinder tool, 7-inch, 13-amp (dw
Answer:	I'm not sure, It depends on the arbor size on your grinder. The package I have says 5/8 7/8. It has an insert you can remove for the 7/8 arbor. I run mine on a 7.25 skill saw. Works well, it might be a handful on an angle grinder. Good luck
Question:	Does it work on wood
Answer:	DW4712 is ideal for cutting block, masonry siding products, and other masonry materials.
Question:	would this fit on a circular saw. I usually use a 7 1/4 blade
Answer:	It is an abrasive wheel meant to be used with a grinder. It is not intended, recommended, or tested by the manufacturer for use with a circular saw.
Question:	Whats the difference between the dw4712 and the dw 4712b? same pics
Answer:	The b stands for bulk. So no different just the way we buy them

• 9-inch reciprocating blade for masonry application - use to cut through brick, mortar, stone, cinder block, and more
• High carbon steel construction with tungsten carbide teeth
• Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi

User questions & answers

Question:	Will this blade cut through stucco and the chicken wire backing
Answer:	I have never tried to cut stucco with chicken wire backing. I think my primary concern would be the teeth of the saw blade possibly catching on the wire and causing the saw to jerk with the risk of you dropping it. Knowing that and being prepared for such a situation it would not cost much to try the blade.
Question:	Will this fit a Erebus reciprocating saw
Answer:	They fit a Milwaukee sawsal not sure for yours though
Question:	What is the maximum width of the blade
Answer:	Width is 31/32's" and thickness is 1/8"
Question:	Does masonry blade come in 12 length
Answer:	I don't know. Mine are all 9".

Product features

Use to cut through brick, mortar, stone, cinder block, and more

Caliastro's 9-Inch Masonry Reciprocating Sawzall Saw Blade has been specifically designed and tested to cleanly and quickly cut through brick, mortar, stone, cinder block, and more.

High carbon steel construction with tungsten carbide teeth

A high carbon steel blade with tungsten carbide tipped teeth for aggressive cutting capability. Re-engineered design in the summer of 2019 offers improved teeth durability and blade life.

Fits all brands of reciprocating saws/sawzalls

Works with all reciprocating/sawzall saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch and Hitachi.

Caliastro LLC

Caliastro LLC is a small independent company based out of Chicago, Illinois. We value our customers and strive to make sure every customer is completely satisfied with our products.

Product description

DEWALT High Performance Masonry Cutting Abrasive Saw Blades have premium silicon carbide grain for long life and fast cutting. The proprietary material mix ensures durable long life wheels. They have 2 full sheets of fiberglass for durability and user safety. They have 5/8-Inch arbor with a diamond knockout arbor for use with worm drive saws. Each wheel has a cutting edge 1/8-Inch think and can be operated at up to 8700rpm.

From the Manufacturer

DEWALT High Performance Masonry Cutting Abrasive Saw Blades have premium silicon carbide grain for long life and fast cutting. The proprietary material mix ensures durable long life wheels. They have 2 full sheets of fiberglass for durability and user safety. They have 5/8-Inch arbor with a diamond knockout arbor for use with worm drive saws. Each wheel has a cutting edge 1/8-Inch think and can be operated at up to 8700rpm.

• Premium silicon carbide grain for long life and fast cutting
• Proprietary material mix ensures durable long life wheels
• 2 full sheets of fiberglass for durability and safety
• Diamond knockout arbor for use with worm drive saws
• Heavy duty cutting of concrete and other masonry materials

User questions & answers

Question:	Will these work for my hand grinder with a 5/8 -11 TPI shank
Answer:	Good Day We have only have a 5 inch blade on amazon which would be your closest option https://www.amazon.com/Toolgal-Segmented-Concrete-Circular-Grinders/dp/B0819YLTTS?ref_=ast_sto_dp Hope this helps you
Question:	Does this cut wet or dry
Answer:	All the 9" battery powered cutters, such as Makita, Milwaukee, DeWalt, use 7/8" arbor 9" blades.
Question:	will this blade work with my dewalt 20v circular saw
Answer:	Yes it will as it has a cut depth of 7/8" and your cutting 3/4". Good luck and I recommend a spray bottle to keep the blade cool unless your using a bench table saw with auto watering.
Question:	Can you cut Corrugated fiber glass roofing panels with these blades
Answer:	Not sure, but if it's designed for a 7" saw blade then it should work. Contact the manufacturer to have the exact answer you're requesting!

Product description

WHY TO CHOOSE DIAMOND BLADES?

SUPERIOR LIFE ►

A Diamond blade used correctly, matches the cutting capacity of

between 100 and 200 abrasive cutting discs

FAST CUTTING ►

A Diamond blade cuts at least twice as fast as an abrasive cutting disc

REDUCTION IN DOWN TIME ►

A Diamond blade needs changing much less frequently than an

abrasive cutting disc

BETTER HANDLING ►

Much less cutting pressure is necessary thus reducing fatigue and

physical stress on both the operator and the machine

INCREASED SAFETY ►

The strong bond between the diamond segments and the robust steel

core make the diamond blade a safer product

RECOMMENDATION FOR USE

► Check that the diamond blade is suitable for the material to be cut

► Fit the blade so it rotates in the direction indicated

► Do not exert too much pressure - let the blade do the work

► Check that the diamond blade does not vibrate during operation

• ► Designed for improved efficiency and exceptional performance. KSEIBI diamond blades represent the optimal solution for obtaining a precise, quick cut, with unrivalled durability, guaranteeing an excellent, uniform result.
• ► Stronger hot-pressed cutting segments combines aggressive cutting ability with a fine, clean cut and no burning of the segments. Elimination the possibility of single segment detachment.
• ► Steel core is made from high alloy, heat-treated steel. ensuring clean cuts as well as a disc operation that is characterized by smoothness and a low level of vibrations.
• ► For use on most types of building materials such as concrete, reinforced concrete, exposed aggregate concrete, concrete paving, granite, quarry slabs, granite slabs, sand-lime stone, brick and masonry.
• ► 7" (180mm) diameter, 7/8" (22.2mm) bore, 20mm-5/8" reducing rings included. Can be used on all types of angle grinders and cut-off saws.

User questions & answers

Question:	Planning on cutting petrified wood with this blade. any experience? also is it compatible with the bosch go14 polisher? i know its rpm goes up to
Answer:	I cut concrete patio stones that are about an inch and a half thick. I bought two of these just in case the first one wore down. It cuts great and I made around 20 cuts. Never had to use the second blade. I am not sure about compatibility with the Bosch.
Question:	The specs say the can be used on a circular saw with a 5/8” arbor but one of the questions answered States it must be a 7/8” arbor. Which is correct
Answer:	You have to put a spacer in the blade in order to use on a 5/8” arbor. I have a 5/8” arbor on my saw so I just ordered a pack of spacers.
Question:	Can this blade be used in a circular saw
Answer:	if your saw can handle and 7/8 inch arbor and a 7" blade, yes. Doubt if it would be good for your saw to cut wet often.
Question:	What is different with model kseibi
Answer:	This hot-pressed diamond saw blade cuts 40% faster than the cold pressed traditional saw blade, and it lasts longer.

Product description

WHAT KIND OF DIAMOND BLADE DO I NEED?

Selecting the size of the diamond blade is all dependent on what tool you are using, as well as the material you are trying to cut. Every application will vary on the task at hand, as well as the bore size and segment height of the blade.

DECIDE WHICH IS MOST IMPORTANT►

The initial price of the tool or the cost per cut. For smaller jobs or occasional use, a low priced tool may be preferable. For larger jobs or regular use, a higher priced tool will actually be less expensive to use because it will deliver the lowest cost per cut.

KNOW THE TYPE AND POWER OF YOUR EQUIPMENT►

Will you be using a 5-hp power cutter or a 70-hp flat saw? The answer will dramatically impact blade choice. The diamond blade size, whether you can use a wet or dry blade and the rpms needed to spin the blade all depend on the equipment.

CORRECTLY IDENTIFY WHAT YOU ARE CUTTING►

Correctly identifying the material to be cut is the most important factor in choosing a diamond blade. It directly affects the cutting speed and the life of the blade. When you know the material our diamond tool specification sheet help you find the most suitable tool. As a general rule,determine the material which will be cut most often, or the material for which top blade performance is most important.

CHOOSE WET OR DRY CUTTING►

Choosing wet or dry may be a matter of user preference or job requirement. Wet cutting is usually preferred because you can cut deeper when using water as a coolant. For tile and masonry saws, either wet or dry cutting blades can be used. For power cutters, dry blades are more popular, but they are often used wet to control dust. Wet blades MUST be used with water. Dry blades may be used either dry or wet, depending on the job and the equipment.

• Arbor: 7/8"-5/8" bushing, Segment height .395"(10mm). Size is 7"x.090"x.395"/10mm.
• Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high.
• Main features: The product is 7" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal.
• Designed for: Brick, block, concrete, masonry, stone etc.
• Applicable models: Angle grinder, Circular saw, Hand-held power saw, Masonry saw, etc.

User questions & answers

Question:	How wide is the cut
Answer:	Yes, 5/8" blade adapter is included
Question:	can this blade be used to cut thin metal
Answer:	It depends on the arbor size of your grinder, this is a 5/8" arbor with a diamond knockout so if those fit, then yes
Question:	Can i use it for skil 3550-02 7-inch wet tile saw
Answer:	Hi, No sure , these blades are for Masonry.
Question:	Will this blade fit a EK8100 makita concrete saw
Answer:	No. Although the blade will theoretically cut through a glass sheet, the heat generated by a high speed grinder will make the glass crack. If you have a variable speed grinder and use it on the lowest speed and perform the cut intermittently, you might be able to make a cut without cracking.

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1"-20mm. Size is 12"x.110"x.395"/10mm.
• This diamond blade belongs to Alskar Diamond Segmented Lighting Series

User questions & answers

Question:	Can this cut SPC flooring
Answer:	This blade is for cutting concrete, wet or dry.
Question:	Will this blade work on a worx wx427l 4.5" circualr saw
Answer:	I doubt a 12 inch blade will work on a 4.5 inch saw
Question:	I wonder how well this cuts hard thin veneer stone
Answer:	Really well.... used it on veneer river rock... smooth finish but don’t force the cut let it glide natural with minimal pressure.... this prevents chipping & cracks
Question:	Some of the blades have a secondary hole, is this a guide pin? Will this work on arbor w/o this pin
Answer:	Yes it will.

Product features

Alskar Diamond Saw Blades

Alskar Diamond 4-1/2 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 4.5"x.070"x.395"/10mm.

Alskar Diamond 5 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 5"x.070"x.395"/10mm.

Alskar Diamond 6 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 6"x.070"x.395"/10mm.

Alskar Diamond 7 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor DM 7/8"-5/8". Size is 7"x.070"x.395"/10mm.

Alskar Diamond 8 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 8"x.070"x.395"/10mm.

Alskar Diamond 9 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor DM 7/8"-5/8". Size is 9"x.070"x.395"/10mm.

Alskar Diamond 10 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.

10 Pack) Alskar Diamond 10 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.

Alskar Diamond 12 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 12"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

Alskar Diamond 14 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

10 Pack) Alskar Diamond 14 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

Alskar Diamond 16 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 12mm. Arbor 1". Size is 16"x.125"x.395"/12mm. Includes 20mm heavy duty bushing.

Product description

ALSKAR DIAMOND has an extensive selection of value priced turbo blades made for smaller job applications. Made to cut fast with minimal chipped edge, these blades can be used on concrete, masonry, stone and other building materials. Great for retail displays for the do-it-yourself contractor or homeowner. Can be used wet or dry.

• 2 Pack of 7 inch diamond saw blades designed to cut concrete, masonry, stone and other building material. Made to cut fast with minimal chipped edge.
• Can be used wet or dry.
• Sintered diffusion bonded.
• Rim height .395"(10mm). Arbor DM-7/8"-5/8". Size is 7"x.070"x.395"/10mm.
• This diamond blade belongs to ALSKAR DIAMOND Continuous Turbo series

User questions & answers

Question:	can this blade fit a workx 4.5 saw
Answer:	Yes, it fit my 4.5 saw but only worked on two cuts before it went dull.
Question:	Is 0.1 inch the actual thickness of the blade
Answer:	yes it is.
Question:	does this product work in an angle grinder
Answer:	Yes
Question:	Can fit with sears craftsman circular saw
Answer:	Yes

Product description

Optimize your concrete, block, and brick cutting work with this Makita 2 Pack Premium 4-1/2” Diamond Turbo Blades. Working at a 90-degree angle, perpendicular to the work surface, applying the proper amount of pressure to allow the cutting blade to do the work. For best results, consider not pushing too hard on the blade, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage and premature wear. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up causing warpage of the blade. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause blade warpage and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.

• ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
• ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
• ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class
• ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear
• ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers & general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 13,800 RPM and a maximum cutting depth of 1" to 1-1/4 inch

User questions & answers

Question:	Does it come with adapter for 5/8 arbor
Answer:	the wide of the segment is 2.3 mm
Question:	do you need to use water
Answer:	Hello, buyer. This saw blade can't be used to cut metal. This saw blade is specially used to cut concrete, Brick, block, masonry and stone.
Question:	Can this cut fiber cement siding
Answer:	Yes you can
Question:	Will this cut quartz countertops
Answer:	if EK8100 could accept the 16 inch blade.it could be use on it.

• Use for general purpose cutting of cured concrete, pavers, brick, block, bluestone, flagstone or any similar materials.
• Specs are 14" diameter X .125 (1/8") thick with a standard 1" arbor hole for most masonry saws and hand-held machines. Also included is a 20mm bushing for Stihl power saws and a drive pin hole for adapting to 8-24hp walk-behind saws. The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.
• The 12MM tall diamond segments maximize cutting life and provide a low cost per cut. Expected blade life is approximately 4,000 inch feet (inch foot=12" long cut X 1" depth). In addition, the key slots are used as depth indication for operator convenience as well as cooling and dust/slurry removal.
• The unique segment/keyslot design allows for better air cooling and chip deflection, resulting in better performance with less stress on the operator and machine. Cougar HS blades may be used with all hand-held power saws, 5-20 hp concrete saws and masonry saws. Max. 5,460 rpm.
• This product is made in USA and has a 100% lifetime warranty with free return shipping! If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!

User questions & answers

Question:	Will this fit an evolution 12" saw
Answer:	Pretty sure it will,it has a one inch center hole
Question:	Do you have a 14" blade with 3/4" arbor
Answer:	20 mm
Question:	Will this fit a 12" dewalt miter saw
Answer:	Yes
Question:	Will this work on a ts420 cutoff saw
Answer:	As long as it’s 12 inch and the right arbor size.

Product features

Cougar HS Wet/Dry Segmented Diamond Blades for Cutting Concrete, Masonry, Stone, Pavers and Similar Materials

Delta Diamond's Cougar HS Diamond Blade have a unique segment/keyslot design allows for better air cooling and chip deflection, resulting in better performance with less stress on the operator and machine. Cougar HS blades may be used with all hand-held power saws, concrete saws and masonry saws.

• PREMIUM GRADE - Premium grade diamonds for high production, fast cutting.
• TURBO DIAMOND BLADE - Continuous Turbo Rim Design ideal for cutting Masonry Work, Concrete, Stone, Brick, Block, and Similar Materials. Cooling holes help to keep the blade cool for increase tool life
• CHIP FREE WET OR DRY CUTTING - Great cost effective general purpose continuous rim turbo blade for your household Angle Grinder, Masonry Saw or Trim saw.
• LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge.
• Size: 5" X .085" X 7/8"-5/8" Arbor | Fits Most Hand-Held Grinders, Circular Saws

User questions & answers

Question:	Is this made in USA or other
Answer:	Made in the USA.
Question:	Is this blade .080" thick or .050" like the image shows
Answer:	Hi, The blade is 0.080" thick. Sorry for the confusion! We are in the process of correcting the label. Our Razorback 4 1/2-Inch Thin Kerf is 4.5" X .050 X 5/8" Arbor which may suit you needs better! ASIN: B07DQW6WR8 Have a great day, Delta Diamond Products, Inc.
Question:	can it cut 26 ga metal roofing
Answer:	I haven’t tried it on metal, it’s not advertised for metal. It cuts concrete like a hot knife through butter.
Question:	Will this cut porcelain tile? Please only answer if you know
Answer:	Yes

Product features

Boss Hog Turbo Diamond Blades

Delta Diamond's Boss Hog blades offer a chip-free smooth cutting experience for the user. Trusted by many for countless of jobs, you can be sure it'll get the job done. Cuts fast, smooth, with a long life. Ideal for cutting masonry work, concrete, stone, brick, block, and similar materials. Cooling holes help to keep the blade cool.

Product description

MK-925D Supreme Grade General Purpose Blades are for dry cutting concrete and masonry. Delivers fast cutting and longer life in brick, block, concrete, granite and other masonry materials. Dry diamond blades can out-perform abrasive blades up to 100 times saving time and money. This blade features a 4" diameter, .080" width, 20mm to 5/8" arbor, and 10mm rim height.

From the Manufacturer

The MK Premium Gold Continuous Rim 925D Series of dry cutting diamond blades feature a unique serrated diamond impregnated cutting surface which provides fast cutting with minimum chipping. These blades are ideally suited for cutting brick, block, concret

• Supreme grade
• General purpose blade
• 4" diameter
• 4" diameter
• 20mm to 5/8" arbor
• Diameter: 4 inch(102mm) width:.080 arbor:20mm-5/8
• gold general purpose blade inch dry cutting -turbo style continuous rim