14 best angle grinder for granite

Product description

3pc kit ideal for cutting tiles made of Granite, Marble, Ceramics, concrete & other similar material. Fits all Angle grinders with a 7/8" or 5/8" arbor. 15,000 RPM Max,



Blades are made of high quality diamond steel and they can be used wet or dry.

• 3pc Kit Contains:
• 1 continuous rim For Smooth cutting of marble, granite, tile & ceramics
• 1 segmented rim For Fast general purpose cutting for masonry, concrete, pavers, Terrazzo, Roof tile.
• 1 turbo rim For smooth & fast cutting of masonry, concrete, pavers, Terrazzo, Roof tile.
• Can be used wet or dry, fits angle grinders with a 7/8" or 5/8" Arbor (adapter included for 5/8")

User questions & answers

Question:	Where are they made
Answer:	Canada
Question:	Would these be good for cutting stone
Answer:	I cut brick with it and it cuts like butter; stone is harder, but it works. Some stone is very hard, but concrete pavers cut very readily. Wear mask, eye protection and gloves; no bystanders, especially children.
Question:	Can these be used in a circular saw with a 5/8" arbor
Answer:	No, it is intended to be used with angle grinders
Question:	Will this cut a metal bunk bed
Answer:	Will it cut a metal bunk bed? Yes. It will. Should you used these blades for that purpose? No. These are masonry bits. And the metal shavings could damage your saw

Product description

Makita’s 4-1/2” SJS Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9564CV is engineered with Makita’s innovative SJS mechanical clutch system to protect the gears for longer tool life. Angle Grinder, Voltage 120VAC, Wheel Dia. 4-1/2 In. , 12. 0 Amps, Spindle Thread Size 5/8 In. -11, Switch Type Slide, Tool Length 11-3/4 In. , Tool Weight 5. 3 lbs. , Speed Type Variable, Lock-on Yes, Lock-off No, Handle Design Barrel Grip, Cord Length 10. 0 ft. , 2, Features Labyrinth Construction, Sass (Mechanical Clutch), Variable Speed, Electronic Speed Control, Includes Wrench, Guard, Backing Flange, Side Handle and Clamp Nut for 7/8 In. Wheels

Makita's 4-1/2-Inch SJS Angle Grinder combines 12 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9564CV is engineered with Makita's innovative Super Joint System (SJS) to protect the gears for longer tool life.

• Powerful 13 amp motor delivers more output and variable (2, 800 - 10, 500) RPM
• Sass technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
• Variable speed control dial enables user to match the speed to the application
• Constant speed control automatically applies additional power to the motor to maintain speed under load
• Soft start suppresses start-up reaction for smooth start-ups and longer gear life
• Powerful 12 AMP motor design for increased output power in a more compact tool
• Super Joint System (SJS) helps prevent gear damage

User questions & answers

Question:	When you release the trigger does the wheel continue to spin to a stop or does it stop pretty sudden
Answer:	It certainly is able to cut 1/4” steel. You will need to procure the necessary steel cutting wheel to do so.
Question:	Keeping its deepest cutting depth, what is the best dust shroud for this model
Answer:	This is made in Japan and assembled in the USA.
Question:	Will it cut 1/4" steel
Answer:	2
Question:	is this item manufactured in japan or just some of it
Answer:	I only received one size of letters, in both black & white.

Product description

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

The DEWALT DW4701 is a great addition to your 4-to-4-1/2-inch grinders. With an advanced diamond matrix, this blade provides a longer life and improved grinder application. It’s designed for consistency, with a straight and dependable depth of cut and a greater life span by 100 times more than the industry standard. Use this blade on a variety of tough applications, including concrete, stone, granite, brick, and tile. It measures 4-1/2-inches in diameter with a 5/8-inch and 7/8-imch arbor. This grinder accessory must be used with the DW4705 4-inch or 4-1/2-inch guard with show and the DW4717 4-inch flange or DW4706 4-1/2-inch flange.

From the Manufacturer

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

• Extended performance diamond matrix provides 350 times the life of conventional abrasives
• Ideal addition to 4-to-4-1/2-inch grinders
• Continuous rim turbo design provides optimal use in brick, block, and tile
• Large diamond segments with cobalt ideal for use across various product applications
• Works with concrete, stone, granite, brick, and tile

User questions & answers

Question:	will it cut threw I beams
Answer:	No
Question:	Will this blade cut granite,corian,marble and ceramic tile
Answer:	For the blade to function properly no water is needed but should wear a good mask and safety goggles because substantial cement dust is generated.
Question:	Can this blade, eith a 7/8" arbor be used with the d28402 grinder which has a 5/8" arbor
Answer:	Yes
Question:	According to specs -Works with concrete, stone, granite, brick, and tile. Will this blade cut metal
Answer:	Yes, cuts most any type of stone countertops. Go slowly to avoid chipping the edge.

• ★FIT SIZE: Outer Diameter: 115mm (4.5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor.
• ★HIGH PERFORMANCE: Tanzfrosch tile cutter blade outer edge is plenty strong, X teeth offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling. High-Performance diamond matrix provides long life and enhanced material removal.
• ★COMPATIBLE MODELS: It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting.
• ★WIDE APPLICATIONS: Tanzfrosch tile cutter blade is designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board . It will be a perfect partner for tile installers and general homemade DIYers.
• ★BUY WITH CONFIDENCE: If any of our products fail to meet your expectations, please get in touch with us and we will try our best to resolve the issue.

User questions & answers

Question:	Does this require water for cutting
Answer:	It should fit all grinders. It fits right on most grinders, it comes with a spacer to put on in case needed for a smaller shaft spindle
Question:	Will this fit a Porter Cable 7 inch wet tile saw
Answer:	Technically it can cut through concrete, but since concrete floors are generally much much harder than tiles, brick and concrete slaps ( which are what these blades intended to cut), dont expect the blades to last very long. I recommend doing it slowly and using little bit of water to prolong the life of the blades.
Question:	This fit dewalt grinder
Answer:	As with most corded drills and grinders, when the trigger is released, the grinder wheel continues to spin down to a stop.
Question:	Will it cut through a concrete floor? I want to cut out a line where its cracking and then bang it out to have a straight cut
Answer:	That's tough a vacuum works the best I think as the shroud limits depth of wheel alot we have used boshe hepa guard and vacuum on this grinder

Product features

Package Included:

3 x Diamond Saw Blade

• Diamond blades 4 ½ Standard, Turbo and Continuous are designed for domestic use and DIY. This diamond saw blades are NOT suitable for cutting reinforced concrete. GRAFF diamond cutting wheels are intended for working with concrete, artificial stone, paving flag, kerb, ceramic and ceramic tile.
• Diamond blades for angle grinder are constructed so that during operation they heat up more slowly which leads to an increase in operating time. Such 4 ½ concrete diamond grinding wheels can be used both for dry and wet cutting.
• Diamond saw blades GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone.
• GRAFF concrete diamond blades 4 ½ Standart and Turbo have teeth with soldered diamond segments all around. Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) heavy duty bushing, Cutting width: 0.079 Inch (2 mm) / 0.098 Inch (2.5 mm) / 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm) / 0.276 Inch (7 mm). Diamond concrete saw blades have a tough body with 0.047 Inch (1.2 mm) thickness.
• Diamond discs are designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. These saw blades have a frame made of improved steel which ensures high solidity during operation. GRAFF diamond blades for ceramic have a high content of soldered diamond segments across the entire circumference.

Product features

UNIVERSAL DIAMOND SAW BLADE SET GRAFF

Universal diamond blade is an accessory for an angle grinder which is designed for cutting various types of building materials through rotational-translational movements. This disc can be used for both dry and wet cutting. Depending on the type of cutting edge there are three types of diamond blades: segmented, massive and turbo.

- segmented – cuts less precise than massive diamond disc. It is suitable for cutting bricks and concrete.

- massive – requires constant water cooling because it quickly heats up. It is designed for precise and smooth cuts.

- turbo – high precision cutting at high rotational speed. It is ideal for stone and concrete.

The disc is cooled by contact with air thanks to segments on the disc.

Depending on the possible cut depth there are discs of different diameters. Models with 115, 125 and 230 diameters are used most often. They are suitable for domestic use. Diamond blades from 350 to 500 mm are used for asphalt cutting.

• FAST CUTTING: Our diamond cup grinding wheel provides for very fast cutting action on masonry, stone, and concrete. High diamond concentration for long life and aggressive material removal
• DURABLE: Large grinding segments with heat-treated steel bodies of our concrete grinding wheel increases durability and wheel life
• HOLE DESIGN: The angle grinder concrete grinding wheel features air holes designed to aid in maintaining and cooling the cutting pattern and reducing wear
• APPLICATION: Our 4 in diamond grinder wheel used for dry/wet grinding of concrete, granite, stone, marble, tile, masonry and some other construction material to smooth uneven surfaces and remove flashing
• WARRANTY: We provide 5-Year Worry-Free Warranty and Unconditional 90-Day Refund & Free Lifetime Technical Support. Buy with confidence! If you have any problem with our diamond grinding wheels, please contact us freely.

User questions & answers

Question:	Will this fit the bosch 4-1/2-inch angle grinder 1375a
Answer:	If you read the product description you'll see that it says 'Food Grade BPA Free'
Question:	What is the height of the wheel, as viewed with the grinding surface down? I need to fit a dust shroud, so I'm looking for a 3/4" height
Answer:	The bottle and caps are reusable, but the tamper-proof rings are not. Once they are separated from the cap, they are no longer of use.
Question:	What is the maximum RPM for this wheel
Answer:	I would not put these into a microwave. They look like the type of plastic that would warp and possibly shrink. I wouldn’t put them in the dishwasher, either. Hand wash only.
Question:	Whats the grit difference with color difference
Answer:	Crystal Lemon, you said heat seal with the correct tool. Do you have a pointer to said tool? Like this? https://smile.amazon.com/Metronic-Impulse-Sealer-Sealing-Machine/dp/B06XC76JVZ/ref=sr_1_3?keywords=bag+heat+sealer&qid=1579190391&sr=8-3

Product features

Diamond Cup Grinding Wheel Heavy Duty Concrete Grinding Wheel for Angle Grinder, Granite, Stone, Marble, Masonry, Concrete

Please protect yourself when start cutting!

We recommend the following personal protective equipment:

• Eye protection
• Ear protection (earmuffs)
• Hand protection (gloves)
• Lung protection (dust mask)

Important note:

1. Never remove the machine's protective cover and make sure it is properly adjusted to keep debris away from you.

2. Make sure that no one else is in danger, especially near the machine while working.

Customer Stories

My husband and I are working on updating our front porch! Easter weekend plans - No one we knew had the tools needed to grind down the cement pad to repaint it properly! Looked at the tool rental department of the big box store and would have easily cost 150+ to rent what we needed. And then.. I thought. CHECK AMAZON! And I did. These were the first go to and I purchased two for safe measure!

Customer Stories

Very impressed with the diamond wheel. I thought I would need to buy more to finish the patio but there is plenty of material remaining on the wheel. It took approximately ~8 hours to grind the paint off of the patio with measurements of 11’ X 16’. The end results is a smoother concrete finish then the “broom” finish of the unpainted surfaces. The final concrete is closer to a steel finish found in warehouse floors.

How to Use It Properly?

1. Strictly follow the instructions in the machine manual.

2. Do not install a diamond dish/cup wheel that is too loose or too tight on the flange.

3. Tighten only with the tool provided with the machine.

4. Be sure to hold the wheels properly to prevent slipping, but do not use excessive force. Never use a hammer.

5. Keep flanges and threads clean without burrs and rust.

6. Before installing the wheel, please replace the deformed or damaged flange.

Specification:

Material: HHS

Production process: sintering

Color: Gold

Outer diameter: 100 mm /4 inches

Inner hole diameter: 20mm / 0.79 inches (without metal ring)

Inner hole diameter: 16mm / 0.63 inches (with metal ring)

Thickness: 5 mm / 0.2 inch

Not threaded

High-Grade Diamond

High diamond concentration for long life and aggressive material removal. Large grinding segments with heat-treated steel bodies which provide increases durability and wheel life.

Widely Application

Suitable for dry or wet grinding of concrete, granite, stone, marble, tile, masonry and some other construction material to smooth uneven surfaces and remove flashing.

Product description

◆ Specification:

Size: 4.5''

Outer Diameter(mm): 105mm / 4.5''

Segment Height: 10mm

Core Thickness(mm):1.2mm

Arbor: 7/8"-5/8" (22.23mm-20mm)

Application:Porcelain tile, Granite ,Marble,stone ,ceramic



◆ Feature:

1. Universal For Dry or Wet Cutting. Using water which helps the blades longevity. The water cools down the blade from heating and decreases the friction in the cutting zone by flushing out all the debris of the materials cut; it also reduces the dust produced from the cutting.

2. Ultra-thin, (1.2mm at cutting edge) for fast cutting and low waste

3. High temperature extraction diamond blade has a long service life and used in segments which can cutting multi materials.

4. X teeth design provides fast smooth precise clean excellent cutting performance. New mesh turbine rim part design, mesh turbine helps to cool and bring out dust, so cutting efficiency is higher, faster and more stable.

5. Application: Super thin diamond blades are designed for hard material, cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate and cement backer board.It will be perfect partner for tile installer and general home DIY.

6. 18V cordless angle grinder or tile bench saw is recommended.

• ☑ Fit Size: Outer Diameter: 115mm (4.5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.
• ☑ Universal for dry or wet cutting. Long service life of hot-pressed sintered blades.
• ☑ X teeth design provides fast smooth precise clean excellent cutting performance. High-Performance diamond matrix provides long life and enhanced material removal.
• ☑ Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.
• ☑ Our Diamond blade can be used for cutting porcelain, ceramia tile, granite , sandstone quartz, marble, brick, slate, cement backer board and other thin masonry blade. It will be a perfect partner for tile installers and general homemade DIYers.

• Turbo-Row design with 24 diamond segments, for 7/8" arbor
• 4-1/2 Inch(Outside diameter 115mm), 3MM Strong steel body and 4.5MM workable thickness
• 40-50 Diamond Grit for grinding CONCRETE/MASONRY/GRANITE/MARBLE/BRICK...
• Turbo Row Design for more flat, persistent and smooth grinding
• Strong steel body provide stable cutting performance and good finishing on the Lower cost to save your money

User questions & answers

Question:	We are getting new flooring and want to put it under my dishwasher but the lip of the counter is too low. Would this work to remove 1/2” of granite
Answer:	Thanks for your question. The recommended rpm is 8063， the maxinum rpm is 13300.
Question:	Will this fit my Dewalt angle grinder
Answer:	I have it on my Dewalt grinder and works fine 5/8
Question:	what rpm rating is this wheel
Answer:	Depends on where you are cutting and what you are cutting. For example granite or harder stones more likely to cut cleaner with water. If it is inside, you can research how to use a putty surround outside of where you are cutting and a bucket underneath if counter, etc.. If outside, a simple garden hose can work. Hope that helps!
Question:	Does this fit the black+decker angle grinder tool, 4-1/2-inch, 6.5-amp (bdeg
Answer:	YES, IT WILL FITS.

Product features

Optimized Formula

Combined with unique grinding formula and high quality of diamond,which could provide good performance on grinding and longer life

Strong body

Strong steel body provide stable cutting performance and good finishing

Turbo-Row Design

Total 24 turbo-row diamond segments make surface grinding of this wheel more flat, persistent and smooth

Application

Turbo-Row-Cup-Grinding wheels are designed for grinding and polishing concrete, marble, granite, masonry, brick, rock and all similar material.Please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

Product description

Main Feature:

Double row segments for quick material removal

Optimized bond and formula for longer life

Optimized segment height minimizes dust and debris

Surface finishing on concrete, screed and natural stone



Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.Ensure that no other person is at risk, especially near the machine while working.



For your Safety:

We recommends the use of following personal protective equipment:



Eye protection

Ear protection (ear sets)

Hand protection (gloves)

Lung protection (dust mask, also called respirator)



How to Use:

Follow carefully the instructions given in the machine handbook.

Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.

Tighten only with the tool supplied with the machine.

Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.

Keep flanges and screw threads clean and free of burrs and rust.



Package Included:

1 x 4-1/2-Inch Double Row Diamond Cup Grinding Wheel

• HIGH QUALITY: Double-Row aggressive turbo cup grinding wheel provides very fast cutting action on masonry, stone and concrete. High diamond concentration for longer life and aggressive material removal.
• LONG WORKING LIFE: Large grinding segments with heat treated steel bodies which provides increases durability and wheel life.
• WIDE APPLICATION: Generally used for dry/wet grinding of concrete, granite, stone, marble, tile, masonry and some other construction material to smooth uneven surfaces and remove flashing.
• AIR HOLE DESIGN: With air holes, they are purposely designed to favor and maintain a cool and stable cutting pattern and reduce wear and tear.
• WET/DRY USE: Double row segments with the 5mm segment height are perfect for both fast and smooth grinding. can be used in wet or dry state, great to use in different situations.adding some water, you get better effects during grinding.

User questions & answers

Question:	Does it fit on a 5/6 arbor
Answer:	We recommend our 4-1/2" double row diamond cup grinding wheel for dry grinding of concrete and other masonry materials.
Question:	Does this fit a 5/8 arbor
Answer:	This has a threaded 5/8" arbor for a hand grinder. You will need a large 3/4" drill and an 5/8 arbor. I wouldn't recommend it.
Question:	What is the overall height specification of the wheel
Answer:	Yes. When the 4 inch was too small for my project I purchased a 7 inch grinder, grinding wheel, and shroud through amazon. The 7 equipment is a significantly larger investment than the 4 1/2. 7 inch equipment: Grinder - DWE4557, floor grinding wheel - DW4775, and shroud DWE46170.
Question:	Will this disk fit on a 7/8 arbor
Answer:	Please check the size first: Outer diameter: 100 mm / 4 inches Inner hole diameter: 20mm / 0.79 inches (without metal ring) Inner hole diameter: 16mm / 0.63 inches (with metal ring)

Product description

NYTiger 4-1/2 inch Segmented Diamond Saw Blades

Package Included:

3 x Diamond Saw Blades



Features:

1. Easy to use.

2. Stronger hot-pressed cutting segments combine aggressive cutting ability with a fine, clean-cut, and no burning of the segments.

3. Ideal for Wet/Dry conditions cutting in a variety of materials such as concrete, marble, granite, stone, brick/block, paves, masonry, and more. Can be used wet or dry. For light or medium-duty cutters.

• ★ SIZE: Diameter: 4-1/2" (115mm). Arbor size: 4/5"-5/8" reducing ring included. Compatible with All 4-1/2" angle grinders and marble cutters with 4/5"-5/8" arbor. Speed (max): 13300 RPM.
• ★ GREAT DESIGN: Segmented style improves airflow, cutting materials dust, dissipates heat, and removes slurry from the cut, helping to maintain the saw blade's cutting performance, easy to use.
• ★ DURABLE: Manufactured with high quality and durable heat-treated manganese steel and diamond, provides a smooth, fast, clean cutting and longer cutting life.
• ★ UNIVERSAL APPLICATIONS: Designed for aggressive cutting of a variety of materials such as concrete, marble, granite, stone, brick/block, paves, masonry, and more. Can be used wet or dry. For light or medium-duty cutters.
• ★ BUY WITH CONFIDENCE: Thank you very much for your great support. Product quality and customer satisfaction is our top priority. If you're not completely satisfied with anything you get from us, contact us and we'll make it right.

User questions & answers

Question:	Is it dry or wet disc
Answer:	Fits any 4 1/2 inch angle grinder with 5/8 threaded shaft.
Question:	Does this cut wood
Answer:	1 1/4"
Question:	Would this fit a 4" grinder
Answer:	It should work with any 4” grinder. I used it on my 4” Craftsman grinder and it worked great!
Question:	Can use to cut tile
Answer:	In the description of the tool, says for 4 1/2 and 5 inches...

• UNIVERSAL: 6" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Kerb. Our 6" angle grinder concrete blade can be used both for dry and wet cutting.
• INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time.
• DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone.
• HIGH SOLIDITY: Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation.
• SPECIFICATIONS: GRAFF concrete diamond blade 6 has teeth with soldered diamond segments all around. Diameter: 6 Inch (150 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) heavy duty bushing, Cutting width: 0.087 Inch (2.2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 12. Diamond concrete saw blade has a tough body with 0.055 Inch (1.4 mm) thickness.

Product features

DIAMOND SEGMENTED SAW BLADE GRAFF

Diamond blade is an accessory for an angle grinder which is designed for cutting various types of building materials through rotational-translational movements. This disc can be used for both dry and wet cutting. Depending on the type of cutting edge there are three types of diamond blades: segmented, massive and turbo.

- segmented – cuts less precise than massive diamond disc. It is suitable for cutting bricks and concrete.

- massive – requires constant water cooling because it quickly heats up. It is designed for precise and smooth cuts.

- turbo – high precision cutting at high rotational speed. It is ideal for stone and concrete.

The disc is cooled by contact with air thanks to segments on the disc.

Depending on the possible cut depth there are discs of different diameters. Models with 115, 125 and 230 diameters are used most often. They are suitable for domestic use. Diamond blades from 350 to 500 mm are used for asphalt cutting.

• 4-1/2” Premium Segmented Diamond Blade for FAST & RELIABLE Tile,Concrete, Cinder Block & Brick Cutting, compatible with All 4-1/2” Angle Grinders and marble cutters ,with 7/8” arbor
• Stronger hot-pressed cutting segments combines aggressive cutting ability with a fine, clean cut and no burning of the segments. Elimination the possibility of single segment detachment.
• Idea for Wet/Dry conditions Cutting in: Concrete, Masonry, Stone, Asphalt, Retractories and Granite
• Steel core is made from high alloy, heat-treated steel. ensuring clean cuts as well as a disc operation that is characterized by smoothness and a low level of vibrations.
• DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers & general industrial applications, Each blade is engineered to work at 13,300 RPM and a maximum cutting depth of 1" to 1-1/4 inch

User questions & answers

Question:	Se puede usar en una sierra sircular de 5 1/2 ??grcias
Answer:	Looks like the picture. Works pretty good too
Question:	i want to use this blade to cut hardi bacher / concrete backer board. is it foe that type of material
Answer:	It's quite durable to use. It will last slightly longer on harder granite.
Question:	Country of origin
Answer:	Is to thin out concrete irregular so greater the amount of crystals will be best effect...
Question:	can this blade be used to cut thin metal
Answer:	Yes, you can use it to sand the surface smoother.

Product features

Caution

1. To set up the diamond wheel,the power must be disconnected.the arrow on the diamond wheel and the rotating direction of the machine must be corresponding.
2. Always wear protective goggles,protective gloves,facemask,safety shoes and working clothes.
3. Holding your cutting machine firmly and steadily while working.Do not overstrain the cutting blade,please cool the blade regularly.
4. Maximum rotation of the machine must not be faster as the allow rotation of the cutting blade.use the correct cutting blade(include correct outer diamater and center hole)for the various materials.
5. For wet cutting,allow running water to cool off the cutting tool.Be care of any electrical shocks or fire hazards.

Packing

Hard alloy tool head,qucik drilling ,long life the workman's chip discharge slot design

Advantage

1. Increase diamond density, increase product life and cutting speed.
2. High speed,Labor saving,Wear resisting,Cut sharp.

Thickness

The thickness is 1.8mm,Uniform thickness, speed balance.

• ✅ Size：105 x 10 x 22.23 mm; Thickness：1.2 mm, Outer Diameter: 105 mm /4 inch; With reducer washer suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.
• ✅ X teeth rim design not only provides faster cutting but also ensures a longer service life.
• ✅ Super thin porcelain blade with free chips for precision cutting, avoid waste of material. Universal for DRY or WET CUTTING.
• ✅ GoYonder diamond saw blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, and cement backer board.
• ✅ Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc)

User questions & answers

Question:	How thin..what is the kerf..of the "super thin" goyonder 4.5 " tile blade
Answer:	Lovit for mackira
Question:	Will this work for 1-1/8" Travertine pavers
Answer:	the 7inch blade I ordered came 5/8 with 7/8 knockout had to knock center ring out to fit on my tablesaw just smack it out with a socket or something
Question:	Is there an option for a thicker blade? My tile saw has a safety shield that is held by an .063 thick metal bracket and this blade is .055" thick
Answer:	The answer is not to grind away the counter-top but to not install/or remove the flooring beneath the dishwater. It is flooring you won't see anyway.
Question:	Is the arbor 7/8 or
Answer:	Thanks for your asking. It depends on the connection of your angle grinder. This wheel has 7/8 Inch arbor. If you grinder has this arbor, it is suitable for your machine. If not, you maybe need a washer reducer which could change the arbor.

Product features

Universal For Dry or Wet Cutting

Universal For Dry or Wet Cutting.Using water when cutting with GoYonder Diamond saw blades, which helps the blades longevity.The water cools down the blade from heating and decreases the friction in the cutting zone by flushing out all the debris of the materials cut; it also reduces the dust produced from the cutting.

X Teeth Turbo Mesh Rim Design

X teeth design provides fast smooth precise clean excellent cutting performance. less dust, less vibration.which can bring higher work efficiency and economic benefits.

Super Thin Diamond Saw Blade

1.2mm super thin turbo mesh rim design not only provides faster cutting, but also ensures a longer service life.

Wide Application

GoYonder super thin diamond blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate and cement backer board.It will be perfect partner for tile installer and general home made DIYers.Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

Product description

Product Name:

4 inch Double Sided Vacuum Brazed Fast Cutting Shaping Grinding Wheel



Specification:

Diameter 4 inch(105mm), 5/8"-11 thread, Thickness 2.4-2.5MM, Diamond Grit #40/50



Application:

1. Multi-purpose and aggressive for fast cutting, shaping and grinding stone

2. Widely used for profiling edges, smoothing out inside sinkhole cuts, and smoothing

3. Rough surfaces for lamination.

4. Very good for removing deep scratches from stone, prior polishing

5. Also widely used for removing coating on concrete floors

6. Concrete countertop fabricator use these discs to efficiently expose aggregates



Feature:

1. Special Design with eight flange holes, the flange can be installed on both side, both side can be used efficient, lower cost.

2. One Disc for multipurpose

3. High diamond exposure rate provides a faster and more aggressive cutting and Grinding.

4. Vacuum Brazed Diamond tools working much longer than Electroplated Diamond tools

5. Engineered for good balance, fast grinding,cutting and long working life.

6. Best choice for people who do granite and marble worktops, headstones, tilers,builders...

• 4-Inch Premium Quality Double Sided Vacuum Brazed Diamond Cutting & Grinding Disc
• Diameter 4"/100MM, 5/8-11 Flange, Thickness 2.4-2.5MM, Diamond Grit #40/50.
• Widely used for profiling edges, smoothing out inside sinkhole cuts, and smoothing.
• Very good for removing deep scratches from stone, prior polishing.
• Widely used for removing coating on concrete floors.

User questions & answers

Question:	My Black & Decker 4.5' angle grinder uses cutoff wheels with a 7/8' arbor. If the flange is removed is the hole this size
Answer:	If the new one has the same diamater and with 4screws it should fit. But not sure if you try to fit this disc with other arbors.
Question:	Can this be used for grinding steel and how long will it last
Answer:	Yes,it can but please confirm its size is 4.5" before you use it. Usually this grinding disc can be used in any 4.5" angle grinder.
Question:	I have arbors from previous purchases. Can I order the disc alone and use the arbors I have
Answer:	It's about an eighth of an inch it's not as thin as you might think there's a little swirlies on the side of the cutting blade make it a little wider than most thin kerf blades that actually seems to cut very well I've cut porcelain and glass with it cuts glass well that's everything pretty well really definitely not a bad blade for the price you need to cut a couple pieces of something hard first to clean the blade up before you get actual use but other than that work great
Question:	can it be used on a DeWalt angle grinder for carbide sharpening
Answer:	I'm sure it would. but I would highly suggest you to use a wet saw to make your cuts on travertine pavers.