12 best metal cutting blade

Product description

Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts with no sparks and cool, burr-free edges. These blades feature Cerment II blend Teeth to deliver up to 3X the life of standard metal cutting carbide blades. With specialized unique features such as Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, and Triple Chip Grind Tooth Design, Diablo's Steel Demon blade series provide unparalleled performance and superior quality cuts.

• Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
• Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
• Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications
• Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability
• Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws)

User questions & answers

Question:	Has anyone cut a section of r.r. track with this blade
Answer:	I have not and would not recommend it. You wouldn't get an inch into the r.r. track before you burned up the carbide teeth. A bandsaw would be more suited for that task, or even and abrasive cutoff saw.
Question:	Will this blade replace an abrasive chop saw blade
Answer:	This blade cannot be used on a chop saw. The RPM on a chop saw is too high for this blade. The maximum RPM this blade can be used with is 1800. A chop saw would use 3800 RPM.
Question:	What revolutions neede to cut metals
Answer:	You could go as slow as around200 rpm and the "slow speed" metal cutting saws, made for carbide toothed blades work fine but don't install this on a saw meant for an abrasive blade. The RPMs are too high and will destroy the blade in short time, unless you only cut wood or aluminum but not steel. Also be aware that small stuff, like1/8" round stock bundled, will catch the teeth and not work well. But for angle iron, tubing, etc, it works great.
Question:	Will this work for exhaust tubing
Answer:	This is a metal cutting blade for tube steel, angle iron, flat bar, structural steel, unistrut, EMT, steel studs and other ferrous metals.

Product description

The IRWIN Metal Cutting Circular Saw Blade features laser cut anti-vibration vents for straighter, truer cutting. Constructed with metal-cutting grade carbide teeth for durability, it has anti-kickback tooth shoulders for improved safety, and is ideal for cutting thin metal.

From the Manufacturer

The Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel is designed for all of your high gauge metal cutting needs. The durable metal cutting carbide tips are designed for a smooth and fast cut. These blades are designed to reduce wear, withstand impacts and provide longer life. The blade is stabilized for smooth and accurate cuts and it's anti kickback design reduces dust and sparks for a safer cut. This blade is ideal for the professional who is looking for a blade to provide them with their metal cutting needs.

• Laser cut blade
• Anti-vibration vents prevent wobble for straighter, truer cuts
• Metal cutting grade carbide teeth stay sharp for long-lasting durability
• Anti-kickback tooth shoulder for safer cutting
• Ideal for cutting thin steel

User questions & answers

Question:	inch, 80T (4935561) Max Rpm
Answer:	Max RPM: 1800
Question:	Can I use this on a table saw
Answer:	Thank you for choosing Irwin Tools. Our goal is to provide our customers with the highest quality and service. Yes the IRWIN Tools Classic Series Steel Table / Miter Circular Saw Blade, 10-Inch 180T (11870) will work on either a table or Miter saw.
Question:	Hi, is this blade thin kerf or full kerf ? Thx
Answer:	This is right about 3/32, so it's classed as a thin kerf
Question:	Many people are having good luck cutting metal roofing panels. Anyone know what gauge steel that is? Can I cut 20 gauge sheet metal with this
Answer:	Metal roofing and siding usually runs aroound 28 ga. I stack a dozen sheets and cut them all at once. Here's my previous review...."Bought mine to cut steel roofing. Stacked 12 sheets of ribbed 28 ga. by 3' wide steel and cut all 12 sheets in one pass in matter of seconds and NO sparks! Used sabre saws and nibblers in past. No comparison for straight lines and speed. Have also been using it to cut angle iron and bar stock. Many times faster and cleaner than my 14" cutoff saw that uses an abrasive disc. Not having a shower of sparks and the accompanying fire hazard is a huge benefit. After several roofing jobs and many misc. cuts, it is still as sharp as new. If it ever does get dull, any saw shop can sharpen it for around $10 or less. The info says for thin steel but I consistantly cut up to 1" by 6" solid steel flat bar stock with no effort whatsoever. The 48 tooth blade doesn't cut thick steel any faster than this 68 tooth and the 48 tooth will not work as well on thin sheet steel. As a matter of fact, the 48 tooth is dangerous on thin stock as it will over-feed and grab. If you are cutting various different thickness of steel, buy this one, and skip purchasing the 48 tooth. This 68 tooth blade is all you will ever need. For best results give it a shot of WD-40 on both sides of body in between cuts. A little bit of lubrication makes cuts effortless. Yor will find yourself actually holding back on it as it virtually self-feeds into the material. After one job this blade paid for itself many times over. Will never be without one again. Only regret is not buying one years ago." By the way, 55 gal. drums are usually 20 ga. I have even cut 1 1/2" drill steels with it.

Product description

Designed for cutting mild steel, Evolution metal cutting blades use dry cut technology, cutting with very little heat and few burrs.

• Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques
• All offer premium quality
• Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.
• 1600 RPM
• 66 Carbide Teeth, .094-Inch Kerf
• 1-Inch Arbor Size

User questions & answers

Question:	For cutting mild steel, what is the advantage of using this blade over the evolution multi-material blade (rage355blade
Answer:	Look at the menu or on the page of Amazon's these file before you buying it.
Question:	I've read reviews on repl. blades for my Dewalt DW872 multi cutter & I'm leaning toward purchasing this blade. Anyone have experience w the combo
Answer:	Metal, for metal. Such knives, drill bit, axes,etc.
Question:	Can these blades be used in my dewalt chop saw or evolution saw only
Answer:	Yes, only for small file on mosaic softly.
Question:	will it cut 1/4 thk mild steel angle
Answer:	Yes. You will destroy the very weak, fragile and smooth of aluminum stucturally physically.

Product description

Look no further than the Diablo line of circular saw blades from Freud for your multipurpose cutting needs. This blade, a 7 1/4 inch, titanium carbide metal cutting blade, can cut up to 1/4 inch of mild steel. It does this with the help of several onboard features that give you a smoother, faster cutting experience. The teeth are tipped with titanium tungsten carbide, giving them enough hardness to cut through several of these steel sheets without issue. There are laser etched vents on four points of the blade, too. These provide you extra stability for smoother cuts. They also cut down on vibrations in the middle of a job, preventing the blade from retaining as much damage as blades without these etchings. Working with the triple chip grind system onboard the Diablo metal cutting blades, you’ll see that you have never ripped through steel faster. Only with Freud can you do the best job possible through wood and steel.

For a super high-impact blade that powers through ferrous metals with clean, burr-free cuts, look no further than the Freud D0748F Diablo 7.25-Inch Ferrous Metals Saw Blade. This is your go-to blade for slicing through ferrous metal components such as steel sheets and piping with smooth, non-abrasive accuracy. For strong, long-lasting resistance, the pre-tensioned blade features Triple Chip Grind technology and high-density carbide tips.

Makes Clean, Burr-Free Cuts in Ferrous Metals

Achieving premium results when working with ferrous metals is all about making precise cuts with clean, flat edging. The Freud D0748F makes this process easy, fast, and precise. This blade is expertly constructed with TCG (triple-chip grind) teeth protected by a special carbide blend, designed to deliver outstanding resistance to the powerful impacts of steel cutting.

Contractors, steel erectors, HVAC installers, and other steel fabricators will want to keep this blade on hand for all jobs that call for cutting ferrous metal components that measure 1/8-inch thick or thinner, such as steel studs, sheets, and piping.

(Note: this blade is for mild steel only.)

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D0748F's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.102-inch kerf between the blade's 48 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D0748F is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide.

The blade owes its robust performance to its premium-grade steel, which is hardened to HRC 48 for an optimum level of durability. And protecting the blade is a Perma-Shield Non-Stick Coating, which provides resistance to heat and corrosion.

Fits Circular Saws

The Freud D0748F is a great addition to your workshop because it is designed with the versatility to fit a variety of circular saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D0748F Diablo 7.25-Inch Ferrous Metals Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade slashes through ferrous containing metals quickly and accurately leaving clean, burr free cuts. Ideal for cutting steel studs, steel sheet-for most mild steels under 1/8 inch thick. This blade can be used on a standards circular saw.

• VERSATILE: This blade can fit most 5/8 inch bores
• EXTREME DURABILITY: Shock resistant brazing allows the carbide tips to withstand extreme impacts, improving their lifetime in high intensity applications
• PROPRIETARY STEEL BLEND: Freud’s TiCo hi density carbide is used in the construction of this circular saw blade. This robust design lets it last longer and cut faster than other steel blends
• LASER CUT ARBOR: Etchings in the blade help keep it level while you’re making your cuts. They also reduce vibrations, preventing premature wear and tear
• TRIPLE CHIP GRIND (TCG) DESIGN allows you to cut through up to 1/4 inches of mild steel

User questions & answers

Question:	Would this provide a clean cut on c-purlin
Answer:	Kobalt tools were made in the USA
Question:	Has any one cut heavy gauge studs with this? Is it worth it
Answer:	so far the mailbox has been amaing. it has endured lots of rain and kept mail dry
Question:	i do fab work on plate steel up to 1/4" thick, will the blade stand up ? or heat up and messup. 48" long 1/4" material
Answer:	For the Louis model 5" would be too tall unless you crop the numbers top and bottom. Aesthetically, I would 3.5" to 4" tall numbers on the Louis model. The other model is taller and 5" would probably work there.
Question:	What is the ideal rpm to run this blade
Answer:	We just started in Amazon and don't offer the locking model yet on Amazon unfortunately.

Product description

Diablo D0770F Steel Demon Ferrous Cutting Saw Blade

For a super high-impact blade that powers through ferrous metals with clean, burr-free cuts, look no further than the Freud D0770F Diablo 7.25-Inch Ferrous Metals Saw Blade. This is your go-to blade for slicing through ferrous metal components such as steel sheets and piping with smooth, non-abrasive accuracy. For strong, long-lasting resistance, the pre-tensioned blade features Triple Chip Grind technology and high-density carbide tips.

Makes Clean, Burr-Free Cuts in Ferrous Metals

Achieving premium results when working with ferrous metals is all about making precise cuts with clean, flat edging. The Freud D0770F makes this process easy, fast, and precise. This blade is expertly constructed with TCG (triple-chip grind) teeth protected by a special carbide blend, designed to deliver outstanding resistance to the powerful impacts of steel cutting.

Contractors, steel erectors, HVAC installers, and other steel fabricators will want to keep this blade on hand for all jobs that call for cutting ferrous metal components that measure 18 ga. or thinner, such as steel studs, sheets, and piping.

(Note: this blade is for mild steel only.)

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D0770F's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.71-inch kerf between the blade's 70 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D0770F is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide.

The blade owes its robust performance to its premium-grade steel, which is hardened to HRC 48 for an optimum level of durability. And protecting the blade is a Perma-Shield Non-Stick Coating, which provides resistance to heat and corrosion.

Fits Circular Saws

The Freud D0770F is a great addition to your workshop because it is designed with the versatility to fit a variety of circular saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D0770F Diablo 7.25-Inch Ferrous Metals Saw Blade.

From the Manufacturer

Freud's Diablo Steel Demon saw blades continue to meet the growing demands of contractors, steel building erectors, HVAC installers, and other steel fabricators. Steel Demon blades include tools with metric arbors for popular low RPM dedicatated metal cutting saws as well as new blade designs for conventional 7-1/4-Inch circular saws. Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts. Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and Pretensioned blades. This blade is designed to fit 7-1/4-Inch Circular Saws. 7-1/4-Inch diameter by 70t, 5/8-Inch arbor, 5600+ RPM, 18 ga or thinner steel max cut thickness, very thin steel.

• The product is 7-1/4x70T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• For 7-1/4-Inch Circular Saws. 1/8-Inch or less Thin Steel thickness Ultrafine cut, 5600+ RPM, Very Thin Steel 18 ga or thinner, 5/8-Inch arbor.
• Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for metal cutting applications.
• Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness
• Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
• Freud's Limited Lifetime Guarantee

User questions & answers

Question:	Can this blade be used to cut non-ferrous metal like aluminium? I don't want to spend money buying a non ferrous blade as well. Thanks
Answer:	Active ingredients are benzoic acid6%,titanium dioxide10%, salicylate acid2.5%, menthol1.1%, precipitated sulphur4.6% in a soothing emollient base.
Question:	can this blade cut 18 gague stainless steel sheet
Answer:	While the product still works past it's expiration date, it does expire.
Question:	will this blade cut metal lathing? Need to cut a 9¼ circle out of a sheet of metal lath
Answer:	Okay I.am.not too sure.This one was looking fake and doesn't look,smell or feel like nixoderm on the skin.I had to throw away and get some sent to me from Nigeria.
Question:	Is this a good choice for Corian
Answer:	Place in the freezer for 10 minutes then take it out and open.

Product description

Made with top-quality GE Superabrasive diamond, this blade is excellent for cutting all ferrous and non-ferrous metals. It is guaranteed to deliver a better combination of cutting speed and tool life, with a lower cost per cut than any other blade on the market. It will last over 100X longer than abrasive wheels and save tremendous amounts of down time due to fewer blade changes. It also cuts with a constant, even cutting depth. Dimensions are 4 1/2" diameter X .100 thick with a 7/8" arbor hole. Also included is a 5/8" bushing for adapting to just about any hand-held grinder or trim saw. The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The maximum safe operating speed is 12,500 RPM.

• Made with top-quality GE Superabrasive diamond, this blade is excellent for cutting all ferrous and non-ferrous metals. It is guaranteed to deliver a better combination of cutting speed and tool life, with a lower cost per cut than any other blade on the market.
• It will last over 100X longer than abrasive wheels and save tremendous amounts of down time due to fewer blade changes. It also cuts with a constant, even cutting depth.
• Dimensions are 4 1/2" diameter X .100 thick with a 7/8" arbor hole. Also included is a 5/8" bushing for adapting to just about any hand-held grinder or trim saw.
• The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The maximum safe operating speed is 12,500 RPM.
• Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose) it will be replaced free of charge!

User questions & answers

Question:	Is it OK to use wet
Answer:	Yes, but the saw blade has 22.23mm(about 7/8 inch) connecting inner hole. Your machine needs an internal bore to match it. If not, you maybe need a washer,such as 22.23-20mm washer...
Question:	Ordered one and will no fit my delwalt grinder 7/8 really disappointed do u have a version that fits my grinder in the description says 7/8 with
Answer:	Yes，our 14 inch metal cutting diamond blade could cut thin sheet metal. And they could be fit on the machine which arbor is 1 inch.
Question:	Can I use this blade to cut metal door jambs? It will fit my Crain
Answer:	Thanks for your asking. The maxmum RMP is 5059, and the rate we recomended is 3024 RMP.
Question:	Will this blade last twice as long as the competition's lower-priced blade
Answer:	I use a wood blade for wood never tried it

Product features

Diamond Extreme All Purpose Heavy Duty 4 1/2-Inch X .100 X 7/8"-5/8" Metal Cutting Diamond Blade

Delta Diamond Product's Diamond Extreme Metal Cutoff blade is the new standard for metal cutting and grinding with many advantages over typical abrasive discs. Use for cutting through all ferrous and non-ferrous metals including sheet metal, pipe, metal plate, steel bar, angle iron, ductile iron and rebar. They last many times longer than abrasive wheels with constant cutting depth. The high quality superabrasive diamonds are vacuum brazed to a steel core creating the strongest possible bond.

Product description

10 Pack 9 Inch 14TPI Metal Cutting Reciprocating Saw Blades

Delivers excellent cutting performance on metal pipe and profile

●Blade Material: Bi-Metal

●Teeth Per Inch: 18TPI

●Blade thickness: 0.9mm

●Total Length: 225mm/9''

●Cutting Length: 150mm

●Cutting Material: Thin sheet metals (1.5 to 4mm), metal pipes/profiles (dia. 5-175mm)

●Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi. ( PLEASE NOTE: THIS BLADE IS NOT SOLD OR CREATED BY ABOVE BRAND. )





Brand Introduction

MRCGTCE offers a complete line of reciprocating saw blades to meet your request. MRCGTCE reciprocating saw blades blades cover the application of all kinds of demolition, plumbing cutting, pallet repair, car dismantling, equipment fixing, etc. We deliver customers high quality blades with optimized design based on the user insights, making sure the professional users cut faster and all blades last longer for different applications. The request from customer motivates us striving for success and improvement.

• ★10-PACK, 9-Inch Metal Cutting Reciprocating Saw Blades, 18 Teeth Per Inch.
• ★Bi-Metal (stronger than HCS) material guarantees long lifetime on metal cutting. Maxmized the cutting range from soft to hard.
• ★Suitable blade height and flexible thin blade body is more resistant to breaking and shattering
• ★Fast straight cut, effortless cutting into thin sheet metal(1.5 to 4mm), metal pipe and pipes/profile (dia. 5-175mm) .
• ★【UNIVERSAL COMPATIBILITY】Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi

Product description

Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts with no sparks and cool, burr-free edges. These blades feature Cerment II blend Teeth to deliver up to 3X the life of standard metal cutting carbide blades. With specialized unique features such as Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, and Triple Chip Grind Tooth Design, Diablo's Steel Demon blade series provide unparalleled performance and superior quality cuts.

• Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
• Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
• Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications
• Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability
• Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws)
• Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
• Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications

User questions & answers

Question:	Can this be used for cutting aluminum
Answer:	Dear friend, this Mechanics Tool Set includes 3 pieces ratchet wrench, also we prepared extension bars and adapters for your multiple use.
Question:	Can this blade cut 3/8" steel rods
Answer:	Dear friend，the weight of this toolbox is 19.84 pounds.
Question:	What is the best Diablo blade for cutting mild steel with a standard circular saw for wood? Need to cut mild steel and drywall steel studs n I'm poor
Answer:	Dear friend，the size of water pump plier is 8 inches, enough length of plier is desgined for saving labor.
Question:	Does this blade cut brass
Answer:	Hi, good morning! We unfortunately do not ship outside of the United States at this time. Thank you for your interest.

Product description

The construction features double reinforced wheel with two full sheets of fiberglass for safety and performance. Material composition of the wheel consists of a premium grain for added wheel life and speed. The chop saw wheel includes enhanced formulations which provide longer life and optimal performance. DEWALTÂ inspects the high quality resin bonds for 100-percent quality before sale for product consistency and quality.

From the Manufacturer

DeWalt offers a full range of Type 1 cutting wheels for low power chop saws, high power stationary machines, high speed portable saws, grinders, and circular saws. These wheels are designed to offer a long service life and fast cutting. Performance is optimized through double reinforcement with two sheets of fiberglass, premium grains, enhanced formulations, and high quality resin bonds that are 100-percent inspected. Satisfaction guaranteed.

• Equipped with heavy-duty Carbide teeth for long life and ejection springs for easy plug removal
• A raised shoulder helps to prevent breakthroughs
• An optimized tooth design delivers fast drilling speeds for helps to increased efficiency

User questions & answers

Question:	Will this cut stainless steel tube
Answer:	Yes, they are, BUT Crescent is one of the better importers. I would compare these favorably to any of the domestic brands, especially for 15% of the price.
Question:	Can this be used to cut 12 ga unistrut
Answer:	Made in China
Question:	Hi friends can I use this wheel for miter saw ??? Thanks for the help and time
Answer:	Exactly on this because I do not have my set in front of me but I believe it's 3/8 inch and an eighth really nice versatile set gives you everything you need pretty much
Question:	Can I use this on a table saw
Answer:	Dear friend, this mechanics tool set is made from excellent manufacturer in China.

Product description

Freud DS0908CF Steel Demon Carbide-Tipped Reciprocating Blades for Thick Metal Cutting, 9"

• High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16" to 9/16"
• Enhanced carbide tip to blade connection for extreme impact resistance
• 1 in. oversized blade body for straighter cuts with less vibration
• Single Blade
• Imported

User questions & answers

Question:	How long will the blade take to cut 4" hub cast iron pipe? the extra heavy variety
Answer:	I'm not sure as I don't have a pneumatic reciprocating saw. The connecting ends do fit all tool less blade connectors on traditional electric saws. Sorry I don't have the specifics for pneumatic tools.
Question:	Is this strong enough to through the steel cables in a car tire
Answer:	Yes, it cuts through that type of metal.
Question:	anyone used this to cut cement backer board? looking to cut some holes for the faucets in a shower
Answer:	Compared to other brands these are the best I! I don’t know how to put it but I’ve never seen any other blade manufacturers make a blade then make another that wud b better ! But I can say there regular blades tell you there 5 times better than a regular one and the carbide ones tell you there 50 times better . Wow that’s crazy good ! Ive had nothing but a great experience with these blades they bend a still keep on cutting. I curantly keep my old ones and make knife blades outta them the metal is just to good to throw away ! The steel comes from Sweden there one of the leading manufacturers of high quality steel , id say all in all what the sa they are in life is close to right but it cud b off one way or the other a little bit . The thing I can tell you is the dag gone things are tuffer than any other blade I’ve used and last longer break less ! I can’t see any other reason to buy other blades they won’t let you down !
Question:	Does this blade have the ability to do a bit of side flexing to cut up under a floor plate secured to concrete floor to get to and cut off a nail
Answer:	These blades usually fit any standard battery driven reciprecating saw. Does your makita fit any other branded blades if so it would fit diablo

• Up to 30x longer lifetime with carbide teeth design
• A 'MUST HAVE' blade for tough cutting jobs on hard material
• Super endurance for hardened materials, e.g. hardened nails, metal cube, stainless steel and fiber glass
• Carbide teeth for high performance in metal and other materials
• Multi-Fit interface fits on most popular oscillating multi tools, two extra adapters in the package cover more tools than any other competitors on the market.

User questions & answers

Question:	will these fit correctly on a Sonicrafter f80 without an adapter
Answer:	Very thin kerf of .055
Question:	would this blade be good for cutting off rusted bolts on a car sway bar
Answer:	Yes it will fit your dewalt wet tile saw. The only thing I would check is the arbor size. The cyclone has a 5/8” arbor and I believe the dewalt is 5/8” too. If that’s the case your good to go.
Question:	will this fit black and decker
Answer:	It should. This fit on my 4” Ridgid grinder with no issues.
Question:	Is this product made in USA
Answer:	I cut 10mm tiles with it no problem should cut 20mm also.

Product features

EZARC Professional Carbide Oscillating Saw Blade Heavy Duty for Hard Materials

User Insight

Traditional HCS and Bi-Metal flush cut blade can only cut soft materials, teeth are easy to wear out when cutting hard material such as Hardened Nails, screw or reinforced fiberglass. Users are always complain the terrible lifetime of bi-metal blades on metal applications.

EZARC Solution

EZARC Carbide blade lasts 30 times longer versus a conventional bi-metal option in metal, the high performance carbide teeth allows you to cut through concrete nails, stainless steel, cement board, fiber glass, sheet metal, hardwood with ease.

Specification:

Teeth Material: Tungsten Carbide

Cutting Width: 1-3/8" (34mm)

Cutting Depth: 1-3/5" (40mm)

Accessories: B-Brand and D-Brand adapters

Up to 30x Longer Life Than Bi-Metal Blades

Thanks to the carbide technology, EZARC oscillating saw blades with carbide teeth can easily handle the toughest metal applications with 30 × life comparing with Bi-Metal blades.

Strong Teeth For Hardened Material

• Cutting hardened bolts, screws and nails;
• Cutting stainless steel, e.g. kitchen front cover;
• Cutting severely abrasive materials, e.g. fiberglass, plasterboard, cement board;
• Cutting small metal pipes or steel profiles;

Fits More Brands Oscillating Multitools

Universal quick release saw blades can be used on numerous oscillating tools .

2 extra adapters are included in the package to fit more multitools than any other brands on the market.

How to Choose the Right Oscillating Tool Blade for Your Job ?

Oscillating tools work by fast and brisk side-to-side movement. Given that there are multiple types of jobs and different teeth material, one might be at lost as to which blade to select. upper image shows how to choose oscillating tool blades for your different cutting demands.

Please Note:

Carbide blade is very great for hardened nails and bolts cutting, but it is not great for wood and soft metal cutting because of the flat teeth geometry design.

How to install the adapter for D-brand quick change oscillating multitools?

Important: Make sure the adapter inner edge locks on the side of the hold pin, don't put the adapter under the pin

How to install the adapter for D-brand quick change oscillating multitools?

Step1. Release the tool holder and insert the adapter between the holder and blade, make sure the adapter and holder center to center

How to install the adapter for D-brand quick change oscillating multitools?

Step 2: Turn the direction of the adapter to the revise side

How to install the adapter for D-brand quick change oscillating multitools?

Step3: Lock the holder, check the adapter position, make sure the adapter lock on the side of the holder

Product description

10 X 50 X 1 FERROUS CERMET CSB

• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB

User questions & answers

Question:	What is the required rotational speed for the 10" steel demon
Answer:	I've cut 0.125" wall 1.5" steel tubing. Works pretty well but won't last for more than about 15 cuts in this rather strong steel. My band saw is better but I always keep one of these blades on hand for precision cuts. On thinner metal, like butter.
Question:	So confusing max rpm is 5800 or 1800 ? why I saw it in my local homedepot it says 5800 rpm on its package
Answer:	That is the limit of its abilities. The key is to set your saw depth deep, so each tooth is in contact with the steel very briefly. If you set the blade shallow, as if you were cutting 1/4" plywood, you will overheat the teeth and be lucky to cut 12" before the blade is destroyed.
Question:	I want to ask if this blade will work with evolution mitre saw
Answer:	Lol....I operate On or Off...I prefer the full ON position to get the job done and move on!!
Question:	Was gonna try this on my hitachi compound miter saw. It is 5,000 rpm has anyone used this blade running at this rate
Answer:	12 Pt., SAE Wrenches: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4"