9 best dewalt dw715

Product description

The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

• Power and durability: 15 amp, 4,000 Rpm motor
• Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
• Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
• Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Compatible with: D24000 Type 1, D24000 Type 2, D24000S Type 1, DW703 Type 3, DW703-B3 Type 3, DW703-BR Type 3, DW713 Type 1, DW713 Type 2, DW713-B3 Type 1, DW713-B3 Type 2, DW713-BR Type 1, DW713-BR Type 2, DW715 Type 3, DW715-B3 Type 3, DW715-BR Type 3, DW716 Type 20, DW716XPS Type 20, DWS709 Type 20, DWS779 Type 20, DWS780 Type 20, DWS782 Type 20

• Genuine, OEM Dewalt Replacement Part
• Dewalt replacement brush & lead, part number 614367-00
• Compatible with: D24000 Type 1, D24000 Type 2, D24000S Type 1, DW703 Type 3, DW703-B3 Type 3, DW703-BR Type 3, DW713 Type 1, DW713 Type 2, DW713-B3 Type 1, DW713-B3 Type 2, DW713-BR Type 1, DW713-BR Type 2, DW715 Type 3, DW715-B3 Type 3, DW715-BR Type 3, DW716 Type 20, DW716XPS Type 20, DWS709 Type 20, DWS779 Type 20, DWS780 Type 20, DWS782 Type 20

User questions & answers

Question:	Will these work with a craftsman model # 126.32563 part
Answer:	I think so. I have a size small for my 11 lb. fur ball and it still has room in it.

Product description

Compatible with: 3660 Type 1, 3660 Type 2, 3660 Type 3, 3680 Type 1, 3680 Type 2, 3680 Type 3, DW703 Type 1, DW703 Type 3, DW703-B2 Type 1, DW703-B2 Type 2, DW703-B2 Type 3, DW703-B3 Type 1, DW703-B3 Type 2, DW703-B3 Type 3, DW703-BR Type 3, DW704 Type 1, DW704 Type 2, DW704 Type 3, DW704 Type 4, DW704 Type 4A, DW704 Type 5, DW705 Type 1, DW705 Type 2, DW705 Type 3, DW705 Type 4, DW705 Type 4A, DW705 Type 5, DW705 Type 6, DW705 Type 7, DW705 Type 8, DW705-220 Type 1, DW705-220 Type 2, DW705-35 Type 1, DW705-35 Type 2, DW705-35 Type 3, DW705-35 Type 4, DW705-44 Type 1, DW705-44 Type 2, DW705-AR Type 6, DW705-B2 Type 4, DW705-B2 Type 5, DW705-B2 Type 6, DW705-B2 Type 7, DW705-B3 Type 5, DW705-B3 Type 6, DW705-B3 Type 7, DW705-BR Type 7, DW705S Type 5, DW705S Type 6, DW705S Type 7, DW705S Type 8, DW706 Type 1, DW713 Type 2, DW713-AR Type 1, DW713-AR Type 2, DW713-B2 Type 1, DW713-B2 Type 2, DW713-B3 Type 1, DW713-B3 Type 2, DW713-BR Type 1, DW713-BR Type 2, DW715 Type 1, DW715 Type 2, DW715 Type 3, DW715-AR Type 1, DW715-AR Type 3, DW715-B2 Type 1, DW715-B2 Type 3, DW715-B2C Type 3, DW715-B3 Type 3, DW715-BR Type 1, DW715-BR Type 3, DW716 Type 1, DW716 Type 2, DW716 Type 20, DW716 Type 3, DW716 Type 4, DW716XPS Type 20

• Genuine, OEM Dewalt Replacement Part
• Dewalt replacement kerf plate, part number 146726-02
• Compatible with: 3660 Type 1, 3660 Type 2, 3660 Type 3, 3680 Type 1, 3680 Type 2, 3680 Type 3, DW703 Type 1, DW703 Type 3, DW703-B2 Type 1, DW703-B2 Type 2, DW703-B2 Type 3, DW703-B3 Type 1, DW703-B3 Type 2, DW703-B3 Type 3, DW703-BR Type 3, DW704 Type 1, DW704 Type 2, DW704 Type 3, DW704 Type 4, DW704 Type 4A, DW704 Type 5, DW705 Type 1, DW705 Type 2, DW705 Type 3, DW705 Type 4, DW705 Type 4A, DW705 Type 5, DW705 Type 6, DW705 Type 7, DW705 Type 8, DW705-220 Type 1, DW705-220 Type 2, DW705-35 T

User questions & answers

Question:	Is this made of plastic or metal
Answer:	The saw is built to make cuts of many angles on wood such cas 2X4's. It will not rip a 2X4. So if by,"Straight " you mean an accurate cross cut,the answer is yes .
Question:	what size is it 2 inch by 10 inch
Answer:	Yes , it will cut trim for outside corners with the trim held vertical against the fence. here are the rest of the spec. Vertical Capacity: Baseboard Against Fence 6-1/2"Vertical Capacity: Crown Molding Vertically Nested 5-1/4"Horizontal Capacity: Baseboard Lying Flat 8"Horizontal Capacity: Crown Molding Lying Flat 6-1/2"45° Bevel Cut Capacity (dimensional lumber) 2x890° Cross-Cut Capacity (dimensional lumber) 4x6"90° Cross-Cut Capacity (Max Width) 2x845° Miter Cut Capacity (Max Height) 4x4 dimensional lumber45° Miter Cut Capacity (Max Width) 2x6 dimensional lumber
Question:	Will this work for my DW715 saw
Answer:	No problem with 4X4s. It will almost cut 6X6s...just got to turn them over after first cut.
Question:	Does it fit dw
Answer:	No idea, I bought mine for a DeWalt DW716 as the description says.
Question:	for how many volts is this saw
Answer:	Thank you very much for choosing our cattamao cat recovery cone. You can apply to Amazon customer service and change the cattamao pet cone.
Question:	will it make a straight cut on a 2x
Answer:	Thank you for choosing our cattamao cone for cats. Our cattmao soft cone for cats is not waterproof,.so our cattmao cat cones for head will get wet on rainy days.
Question:	It says: "cut up to 6-1/2-inch base molding against the fence". Does that include a cut it at 45 degrees for making a mitered corner
Answer:	This one that I bought was a large and it is not to big. It fits my dog pretty close, but I can fit 2 fingers under it. My mixed breed is a small golden size.
Question:	Can this saw cut a 4x4 at 90 degrees? or what is its max cut depth
Answer:	Definitely I would measure your dog and strictly go by that. I have a malti poo and he was a little bigger than the measurement indicated for a small size. I went with a medium and it’s a little big but better than being too small. Best if your measurements fall in the middle of the range as there’s about 3” of Velcro. I hope this makes sense. Otherwise I really love the quality of it.

Product features

DEWALT DW715 15-Amp 12-Inch Compound Miter saw

The DW715 12" Single-Bevel Compound Miter Saw is powered by a 15 Amp motor to drive 4,000 rpm, delivering extended power and durability. Features stainless steel miter de tent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 6-1/2" of base molding vertically and 5-1/4" of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

Features:

-15 amp motor, 4,000 rpm delivers extended power and durability.

-Adjustable stainless steel miter de tent plate with 11 positive stops improves productivity and ensures cutting.

-Precise miter system and machined-base fence support optimize cutting accuracy.

-Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts.

-Bevels 0°-48° to the left and 0°-3° to the right for increased capacity.

-0°-50° left and right miter capacity for greater versatility.

-Lightweight (42 lbs.) with built-in carry handle for easy portability.

Cam lock miter handle with de tent override deliver quick and accurate miter angles.

-Three hardened steel bevel stops at 0°, 33.9°, and 45° delivers versatility at most common bevel angles.

Specifications:

-45° Bevel Cut Capacity (dimensional lumber) 2x8.

-45° Miter Cut Capacity (Max Height) 4x4 dimensional lumber.

-45° Miter Cut Capacity (Max Width) 2x6 dimensional lumber.

-90° Cross-Cut Capacity (dimensional lumber) 4x6 in.

-90° Cross-Cut Capacity (Max Width) 2x8.

-Amps 15 Amps.

-Arbor Size 5/8" or 1 in.

-Blade Diameter 12".

Product description

DeWalt Brush & Lead(10) This comes with10 brushes!!!! Part Number: 614367-00 Used with the following DeWalt models: DW703 Type 3 10 Inch Compound Miter Saw DW713 10 Miter Saw DW715 Type 3 Miter Saw DW716 Type 20 12" Miter Saw This Is An OEM Part NOT An Aftermarket Part!!!! Thanks For Looking!!! Have A Great Day!!! (:

• Brush & Lead (10)

Product description

2 Dewalt 630065-00 Miter Saw Clamp Assemblys (2 Pack) This part is compatible with the following machines:DeWALTDW718 Type 2 Miter SawDW717 10" Miter SawDW718 Type 3 Miter SawDWS780 Type 1 12in Compound Miter Saw

• Sold on Amazon

User questions & answers

Question:	Can anyone tell me the actual shaft diameter of this clamp
Answer:	Yes. These clamps fit my new DW715 just fine.
Question:	Will these works in DW
Answer:	No, it uses an LED to cast a shadow in the work surface of the blade...
Question:	Does the clamp work with the DW
Answer:	Hello, We appreciate your question. The model DWS780 is electric with a power cord. It is not battery operated.
Question:	Does this work with the DW
Answer:	The 780 has the LED shadow doodad on it, if that's what you mean.

Product description

Universal dust bag fits all Dewalt miter saws.

Keep your work area clean and clear for improved accuracy using the DeWalt DW7053 universal dust bag. This dust-collection bag is designed to work with all DeWalt miter saws to help you keep sawdust and other debris out of the air and your eyes while you work, along with keeping the kerf clearer so you can see what you're doing as you cut. It's tough to imagine, but this little accessory makes working safer and more enjoyable.

From the Manufacturer

DEWALT DW7053 Universal Dust Bag All DEWALT Miter Saws

• Universal dust bag fits all DEWALT miter saws
• Captures Sawdust to keep your shop and your work surface cleaner
• Prevents dust from catching in your eyes or collecting in the kerf

User questions & answers

Question:	does the dust bag for 704 & 705 does it work on a 703 miter saw
Answer:	Approximately one and one half inches (1 1/2") is the diameter of the dust discharge on my saw.
Question:	Dcs 571 Dust bag portable circular saw
Answer:	1 stand, if you want 2 you must purchase 2
Question:	I have a Craftman mitre saw (#234811) will it fit that
Answer:	I have a DW713 and use the DWX725B stand and it fits perfectly.
Question:	What is the inner diameter of the opening
Answer:	The saw attaches to the two arms that attach to the main beam. This stand is great; I am a dyi person and I use a roller stands to support the moldings. It folds up for easy storage.

Product description

Used to accurately position crown molding vertically against saw fence at exactly the same angle for every cut. Includes: stops, one for each side of blade.

Designed to work with DeWalt saw models DW703, DW706, DW708, DW712, DW715, DW716 and DW718, the DeWalt DW7084 Crown Stops come with two stops--one for each side of the blade. These stops accurately position crown molding vertically against the saw fence.

• Accurately positions crown molding vertically against the saw fence
• includes 2 stops, one for each side of the blade
• Tough, steel construction
• Measures 6-1/2-x-4-1/2 inches
• Designed to work with DeWalt models DW703, DW706, DW708, DW712, DW715, DW716, DW717 and DW718

User questions & answers

Question:	Will these work with the flex volt dhs790at
Answer:	It's made out of plastic.
Question:	Does this work with the new 12" flex volt slider
Answer:	2 5/8 X 9 5/8
Question:	Will these fit a ridgid r4221 12” dual bevel compound sliding mitre saw
Answer:	Yes
Question:	Will this fit the DWS
Answer:	Yes
Question:	do these make the brake work
Answer:	120 Volt. Standard circuit but recommend you have it on a 20Amp circuit.

Product features

DW7084 Crown Stops

The DW7084 Crown Stops comprise 2 stops to accurately position crown molding vertically against the saw fence. For use with DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718 and DWS780.

Product description

Dewalt 146726-02 Kerf Plate

• Genuine, OEM Dewalt Replacement Part
• Dewalt replacement plate,kerf, part number 146726-02
• Compatible with: 3660 Type 1, 3660 Type 2, 3660 Type 3, 3680 Type 1, 3680 Type 2, 3680 Type 3, DW703 Type 1, DW703 Type 3, DW703-B2 Type 1, DW703-B2 Type 2, DW703-B2 Type 3, DW703-B3 Type 1, DW703-B3 Type 2, DW703-B3 Type 3, DW703-BR Type 3, DW704 Type 1, DW704 Type 2, DW704 Type 3, DW704 Type 4, DW704 Type 4A, DW704 Type 5, DW705 Type 1, DW705 Type 2, DW705 Type 3, DW705 Type 4, DW705 Type 4A, DW705 Type 5, DW705 Type 6, DW705 Type 7, DW705 Type 8, DW705-220 Type 1, DW705-220 Type 2, DW705-35 T
• Measures approximately 8.00 X 2.85 X 0.60 inches

User questions & answers

Question:	Does this fit a model
Answer:	Yes it does have them on mine right now. They work great.
Question:	Does fit on DW
Answer:	These stops are the same as the ones for Ridgid R4221. Ridgid stops are #HM-0890410228721 sold by Parts Warehouse. After careful measuring both saws for placement of stops these fit the saw perfectly. The Knob Thumb screw is an M8 thread(Metric). Same thread on the Dewalt. I know I checked at HD on a dewalt. They also come with clip nuts, you can drill a hole and use these to secure the the crown stop.Trust me these work. Heavy duty also
Question:	I have a black & decker 1710 type 2 10" saw. i need 6-5/8" long plate x 1 3/16" wide and about 1/8" thick. will this fit? dimensions unclear
Answer:	Yes, the DW7084 will work with DWS779
Question:	I have a DW 705 12" compound (not sliding) mitre saw...will this kerf plate fit? Thanks
Answer:	Nope

Product description

DeWalt N126162 OEM Miter Saw Dust Bag

This part is compatible with the following machines:DEWALTDW715 Type 3 Miter SawDW716 Type 20 12" Miter SawDWS782 (Type 20) 12" Double Bevel Sliding Compound Miter Saw

Model Number352VS Type 7  352VS Type 8  DCS361B Type 1  DCS361M1 Type 1  DW713 Type 2  DW713-AR Type 2  DW713-B2 Type 2  DW713-B3 Type 2  DW713-BR Type 2  DW715 Type 3  DW715-AR Type 3  DW715-B2 Type 3  DW715-B2C Type 3  DW715-B3 Type 3  DW715-BR Type 3  DW716 Type 20  DW716XPS Type 20  DWS709 Type 20  DWS780 Type 1  DWS780 Type 20  DWS780-AR Type 20  DWS780-B2 Type 20  DWS782 Type 20

• Genuine, OEM Dewalt Replacement Part
• Dewalt replacement dust bag, part number N126162
• Compatible with: 352VS Type 7, 352VS Type 8
• Measures approximately 11.00 X 3.00 X 2.30 inches

User questions & answers

Question:	Will this fit a Dewalt dcp
Answer:	I don`t know your model ,mine is a 10" chop/ miter saw. best look for a parts blowup w/ part #`s on it.
Question:	Is the bag as pictured yellow with black DeWalt on it or just solid black
Answer:	I don't think it will fit. It's for a 12 inch Dewalt.
Question:	Dhs716 Flexvolt 12 miter saw Will this fit
Answer:	Yes! Get it. I'm so glad I did. My old one was marred up.
Question:	Will this bag fit on a dws780 miter saw? i’m seeing conflicting reports. thanks
Answer:	Yes, DW7084 crown stops will work with model DHS790