9 best drum sanders

Product description

JET JWDS-2244 22" Drum Sander With Stand (723540OSK)

• SPEED REGULATION: Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed.
• TOOLLESS ADJUSTMENTS: Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed.
• PROTECTION FROM HEAT: Precision-machined and dynamically-balanced extruded aluminum drum is designed to dissipate heat.
• EFFICIENT DUST COLLECTION: Dust hood has an integrated channel that mirrors the shape of the drum and directs debris to the 4" port.
• STABILITY: Stand has a 23-1/4" x 41-3/4" footprint to increase stability, a storage shelf, and pre-drilled holes for casters.

User questions & answers

Question:	Will this work on metal
Answer:	This model has a drum that is 22” wide (44” if piece is flipped) and the 1632 is 16” wide (32” if piece is flipped). This is why drum sander model numbers have one number which is half of the second number.
Question:	What is the in feed table height from the floor with the included open table
Answer:	You would have to check with whoever is shipping it
Question:	What is the actual size of the drum
Answer:	8 amps and .6 amp on the feed motor. Recommended circuit size = 15 amp
Question:	What are the differences between this model and the 1632 model
Answer:	Hi Malia: I haven't had my machine very long but I've easily sanded wood (red oak) to 1/4" and could probably go down to 3/16". 2mm is closer to 1/8" and I think that might be difficult. Not because of the thickness, really, but more from possible contact between the powered rotating drum and the conveyor feed. I that happens it would risk damaging both abrasive surfaces and replacing either of them is a nuisance. And expensive. The workaround for this would be to construct a very flat wooded platform upon which to feed your desired thickness wood, maybe make it 3/4" thick. Then you could move stuff through with relative impunity. Would need to be careful the abrasive drum wouldn't kick back the sanded pieces since the wooden substrate would lack "traction" like the conveyor does. I'd stand behind the wood pieces and put forward pressure on them as they go through. If it did kick back it probably wouldn't be too big a deal, though I'd be sure to wear safety glasses in case it splits apart. Hope this helps.

Product features

JET 723540OSK, JWDS-2244 Drum Sander With Stand

The 1.75 horsepower motor delivers plenty of power to handle just about any sanding task. The innovative tool-less parallelism system keeps adjustments simple. The worktable is easily positioned by a turn of the parallelism dial. The variable-speed rate permits you to choose the optimal feed rate for a full range of projects, while the Sandsmart feature continuously monitors the load on the drum motor to prevent an overload situation. The mirrored design of the dust hood optimizes dust collection preventing chips and dust from getting between your work-piece and the finish. The JET JWDS-2244 Drum Sander delivers everything you need for an effortless finish.

Product description

Remember when you used to have to sand those rounded edges by hand? With the WEN oscillating spindle sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we've sacrificed power. The WEN oscillating spindle sander features a smooth and quiet 1/2HP 3.5 amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber Drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, Table inserts and Spindle washers organized and accessible for Quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN product, Our oscillating spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
• Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
• Attach the dust collector of your choice to the onboard dust port to minimize clean-up
• Backed by a two-year warranty

User questions & answers

Question:	How loud is it
Answer:	Not as loud as belt sander. If I was doing a lot of sanding, I would wear hearing protection. It's about 60 to 70 dbs when sanding. The belt sander is about 70 to 80 when sanding. Prolonged use : ear plugs
Question:	Did i get a lemon ? The largest sanding sleeve slides when the machine starts, and so no pressure can be applied to it. What to do
Answer:	Could be the sleeve. I tighten mine down and it works fine. I'm very happy with the one I have. I would contact the manufacturer.
Question:	what's the actually sanding height possible with this sander
Answer:	If the sanding drum in installed flush with the rubber core, the "as-designed" safe sanding height ( distance from the table top to the bottom of the drum downstroke) is 3 3/4 inches. The stroke is 1/2 inch, so it will sand a total of 4 1/4 inches if utilizing the upstroke.
Question:	Anyone find a place to put the extra washers? It's driving me nuts having, seemingly, no where to put them
Answer:	All those neat little places that are designed to hold the accessories are designed by people that don't use the equipment. All the washers, sanding sleeves, mandrills for my machine are in a box not far from the sander. Anything stored as per design would end up covered in sawdust and would have to be removed every time a vacuum or air gun is used for clean up. Cigar box (or similar) is just fine.

Product features

WEN 6510 Oscillating Spindle Sander

Remember when you had to sand those rounded workpieces by hand? With the WEN Oscillating Spindle Sander you'll simplify the daunting task of sanding down curves, arcs, contours and other odd shapes. Expect our quiet 1/2HP 3.5 Amp motor to generate up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six easy-to-change sanding sleeves to allow for a full range of curves that match whatever the situation calls for. The ultra-convenient 1.5 inch dust port provides the option to attach a dust extractor to collect sawdust, ensuring a cleaner work surface while minimizing clean-up after the project.

Powerful Motor

Delivers 3.5 amps (1/2 HP) of sanding power, generating up 2000 RPM and 58 OPM.

Designed for Stable Operation

Pre-drilled holes for mounting along with the sturdy and heavyweight design maximize tool stability.

Cast Iron Worktable

The 15 by 11.5 inch worktable provides more than enough space for larger projects during operation.

Onboard Storage

Side rods and disc slots provide convenient storage for the wide variety of sanding drums and discs.

Ultimate Versatility

The WEN Oscillating Spindle Sander features six different-sized sanding sleeves (1/2, 3/4, 1, 1-1/2, 2, and 3 inches in diameter) and five different rubber drums for optimal compatibility with any size of workpiece. Whatever the shape of your project, expect the WEN 6510 Oscillating Spindle Sander to deliver the right size drum for the job.

Product description

Description

Total:384pc Drum Sander+1pc wrench

Sand Ring(360pc)

6.3mm Sand Ring(120pc)

20 * 80

20 * 120

20 * 240

20 * 320

20 * 400

20 * 600



9.5mm Sand Ring(120pc)

20 * 80

20 * 120

20 * 240

20 * 320

20 * 400

20 * 600



12.7mm Sand Ring(120pc)

20 * 80

20 * 120

20 * 240

20 * 320

20 * 400

20 * 600



drum mandrels(24pc)

8 * 6.3mm drum mandrels+2.35mm handle

8 * 9.5mm drum mandrels+2.35mm handle

8 * 12.7mm drum mandrels+2.35mm handle

 



Package Including

Packing

384pc Drum Sander+1pc wrench

• Applying Widely:The set which are widely applied in nut-carving,wood,metal,plastic,jade,circuit board,engraving,wood carving,metal,plastic,jade, circuit board DIY and other grinding. It is a must-have item for homes, factories, and other DIY finishing and working
• Note:The sanding drum will be attritted more quickly on metal surface, please replace sleeves timely in order to achieving the better sanding effect
• Packing list:Kit includes cloth backed all-resin-bond abrasive bands for each sized drum(384pc Drum Sander+1pc wrench)
• Easy to Install:Drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and achieving better finishing
• Selling or After Selling:If you have any advice welcome to give me

User questions & answers

Question:	What's the minimum thickness of stock this can sand
Answer:	i have a 352 vs and it fits fine
Question:	Where do I buy the sanding paper
Answer:	Yes all that
Question:	What is the height of this unit? From table to top of unit or handle
Answer:	Mine is about 30 years old now and the new bag and tube fit just fine
Question:	Come with paper
Answer:	I couldn't find the tool either. I cut a 1/2in piece of metal electrical conduit which fit over one of the gears. Put one end of the belt over one gear put the 1/2in conduit through the other end of the belt and over the other gear which will stretch the belt and slide the belt into place and remove the conduit from the gear. This works great for me.
Question:	Is it normal to have an area on the drum that doesn’t get covered with sandpaper when replacing the sandpaper? A small wedge. I’m using genuine jet pa
Answer:	No special tools needed. Remove cover and stretch belt over while rotating drive by hand. It's not easy but will work.
Question:	Once you set the drum does it lock it place
Answer:	Yes, the PORTER-CABLE 893626 will work with the PORTER-CABLE 362 type #6.
Question:	Can this be used to grain aluminum
Answer:	No, this would not be compatible.
Question:	where can I get the extension tables and casters for this machine
Answer:	The material is the same as a serpentine belt on a car!, there are two types the ribbed one like you see here and the one that has grooves across the interior. I had to reorder the grooved type, make sure yours is one or the-other!?

Product features

JWDS-1632 Drum Sander With Stand

Introducing the newly redesigned JET JWDS-1632 Drum Sander from JET. The innovative tool-less parallelism system keeps adjustments simple. The worktable is easily positioned by a turn of the parallelism dial. The variable-speed rate permits you to choose the optimal feed rate for a full range of projects, while the Sandsmart feature continuously monitors the load on the drum motor to prevent an overload situation.

The mirrored design of the dust hood optimizes dust collection preventing chips and dust from getting between your work-piece and the finish. The JWDS-1632 Drum Sander delivers everything you need for an effortless finish.

Features of JWDS-1632 Drum Sander

- Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload.

- Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required.

- Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position.

- Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port.

-Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port.

- Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage.

- Precision-flattened reinforced steel conveyor bed.

- Redesigned conveyor system pulls the workpiece through the sander instead of pushing.

- One rotation of the top-position handwheel adjusts the drum height by 1/16".

- The relative depth scale on the handwheel allows the user to reset and measure the depth for every project.

- Infinitely variable speed control of up to 10 feet per minute allows the user to choose the optimal feed rate.

- Toolless abrasive take-up clips make changing abrasives quick and easy.

Snipe is virtually eliminated thanks to the adjustable tension rollers that apply downward pressure to the workpiece.

- Separate feed and drum motors provide independent control, optimizing the performance of the sander.

- Conveyor belt TRACKERS reduce the need for manual belt adjustments.

Integrated on/off switch and variable speed control knob are conveniently located.

- Stand features a 20" x 37" footprint to increase stability and has a storage shelf and pre-drilled holes for casters.

- Drum is easily removable.

- Drum utilizes sealed and permanently lubricated ball bearings for longer life.

Shop Fox W1740 Drum Sander

Finally, get the even sanding performance only a self-feeding drum sander can provide in a smaller shop sized unit. The 12-inch width and 3-1/2-inch thick capacity handles most of the stock produced in any shop, which makes it the ideal machine for removing telltale surface planer marks. Accepts hook and loop sanding rolls for easy installation and grit changes.

Variable Speed

The W1740 features a variable speed knob which allows you to increase the feed rate from 2.47–17.3 FPM. The variable speed option is ideal when changing between sanding hard and softwood.

Bench Mount

The base of the W1740 Drum Sander has holes that allow it to be mounted to a workbench or used with the optional D2275 Tool Stand. This compact unit is perfect for the shop with limited space as the footprint is only 3-1/2-inch deep x 22-1/4-inch wide.

Adjustable Depth of Cut

Easily adjust the depth of cut with the simple turn of the crank handle. Each full turn of the crank handle raises the conveyor table approximately 0.025-inch (0.64 mm) for precise adjustments.

Dust Collection

This drum sander features a 2-1/2-inch dust port. When connected to a dust collection system, the dust hood directs suction to remove harmful wood and abrasive dust from your work area. This also decreases dust cake formation on your roller allowing for more efficient sanding.

Total:384pc Drum Sander+1pc wrench

Sand Ring(360pc) 6.3mm Sand Ring(120pc) 20 * 80 20 * 120 20 * 240 20 * 320 20 * 400 20 * 600 9.5mm Sand Ring(120pc) 20 * 80 20 * 120 20 * 240 20 * 320 20 * 400 20 * 600 12.7mm Sand Ring(120pc) 20 * 80 20 * 120 20 * 240 20 * 320 20 * 400 20 * 600 drum mandrels(24pc) 8 * 6.3mm drum mandrels+2.35mm handle 8 * 9.5mm drum mandrels+2.35mm handle 8 * 12.7mm drum mandrels+2.35mm handle

Applying Widely

The set which are widely applied in nut-carving,wood,metal,plastic,jade,circuit board,engraving,wood carving,metal,plastic,jade, circuit board DIY and other grinding. It is a must-have item for homes, factories, and other DIY finishing and working

384pc Drum Sander+1pc wrench

LxWxH - 1.97 x 1.5 x 1.97 inches

Weight - 300 Grams

Applying Widely

The set which are widely applied in nut-carving,wood,metal,plastic,jade,circuit board,engraving,wood carving,metal,plastic,jade, circuit board DIY and other grinding. It is a must-have item for homes, factories, and other DIY finishing and working

Note:

Please wear professional goggles to protect your eyes, because maybe there are flying grits when the sanding drum turning at high speed.

The sanding drum will be attritted faster on metal surface, please replace sleeves timely in order to achieving the better sanding effect.

These product are inedible, and please keep them away from babies under 3 years old.

With heavy duty rubber

Drum mandrels with self-expanding rubber cushion, making the sanding bands close to the mandrels firmly and achieving better finishing.

Note:

The sanding drum will be attritted more quickly on metal surface, please replace sleeves timely in order to achieving the better sanding effect

Durable

They are thick and durable. It will buffer when grinding, and brings a better polishing effect.

Using gauze as base

It 's not easy to break as the gauze base connected by fiber.

Silicon carbide

They are well made by silicon carbide, corrosion resistance, high temperature resistance, high strength, not easy to burn and block when grinding.

Not easy to break

With good elasticity, it will not easy to break. That reduces the loss, and saves time to change the sand ring.

Product description

The POWERTEC 11300 Drum Sanding Kit is ideal for use with drill presses and hand power drills. The kit is excellent for sanding holes, edges, contours and irregular shapes. The kit includes 4 different drums and 16 Aluminum oxide abrasive sanding sleeves. Drum size are: 1/2-Inch x 1-3/4-Inch with 1/8-Inch shank, 3/4-Inch x 2-1/4-Inch, 1-Inch x 2-1/4-Inch and 2-Inch x 2-7/8-Inch with 1/4-Inch shank. Each drum has four sanding sleeves for medium (2-80 grit each) and fine sanding (2-120 grit each)

• Use with drill presses and hand power drills
• Sand holes, edges, contours and irregular shapes
• "Four drum sizes: 1/2-Inch x 1-3/4-Inch with 1/8-Inch shank and 3/4-Inch x 2-1/4-Inch, 1-Inch x 2-1/4-Inch and 2-Inch x 2-7/8-Inch with 1/4-Inch shank"
• Each drum has four sanding sleeves: 2-80 grit for medium sanding and 2-120 grit for fine sanding
• Slide sanding sleeve onto drum. Turn sanding sleeve nut to the left to tighten. Tightening the nut expands the drum and holds the sanding sleeve in place. Make sure drum is tight.

User questions & answers

Question:	What is the height of the sanding surface on the 4 drums? Comments are clear that the drums are not 2" tall (as the description indicates
Answer:	This will fit 334 TY2-5.
Question:	Do these come with a storage case
Answer:	This belt is manufactured in the United States.
Question:	Will these work for a router
Answer:	It worked for my 333. 5" Porter Cable Sander. Very easy to install.
Question:	will this make a shallow indentation on a piece of wood using my drill? would I need to purchase anything else to do this
Answer:	Yes it will. It fit my 360 type 2. But the bag fabric wasn't too good. I used the new frame with my old bag.

Product description

POWERTEC OS1000004 Oscillating Sander Rubber Drum, 3/4", 1", 1-1/2", 2", 3", 5/PK

• Fit Powertec OS1000, Masterforce 2400056, Sears 21500, Grizzly G0723.
• Fit Most Oscillating Sanders in the market
• Length 4-1/2"
• Diameter: 3/4", 1", 1-1/2", 2" and 3"
• 5 Rubber Drums / Pack

User questions & answers

Question:	Does this include the washers required for compression
Answer:	Yes. You can use the whole width of the belt on that end. However, the opposite end is the end that oscillates so you would need to continue to move the support or you will get sand dust build up on the belt. It is not the best spindle sander in the world but will work if your projects do not call for a lot of curvature work.
Question:	Will these fit a Ryobi OSS450 oscillating sander
Answer:	All Asian parts, Taiwan is final assembly countryNot the best quality...but a ok value
Question:	will these drums work with a drill press
Answer:	Two or three would fit my Jet mandrels but the rest did not, seem to be different diameters. They are also about an inch shorter than the factory Jet sleeves. I don't think these are the correct ones for the Jet.
Question:	Do these fit the ridgid eb
Answer:	You will have to do your own search.

Product features

POWERTEC Oscillating Sander Rubber Drum, 3/4", 1", 1-1/2", 2", 3", 5/PK

Fit Powertec OS1000, Masterforce 2400056, Sears 21500, Grizzly G0723.

Fit Most Oscillating Sanders in the market.

Package Dimensions: 6.2 x 5 x 3.8 inches

Item Weight: 1.5 pounds

Product description

Delta 31-814 Conveyor Belt for 31-250 Drum Sander

User questions & answers

Question:	This is compatible with 31-255X model
Answer:	Yes I think so I bought it for a sawzall but used it on a skil saw I think it’s somewhat universal
Question:	the feed belt on my 31-250 delta drum sander does not keep tracking properly
Answer:	Yes
Question:	does this fit a 31-255x drum sander
Answer:	I do not remember the amp rating for this. I would think it is 18 ga. so I do not think the vac would draw as much as a router. Check the rating on your vac.
Question:	does this fit 18x36 delta sander
Answer:	It goes on the pad support and around the fixed pulley. Remove the 3 screws that secure the pad to the sander. This will expose the pad support with the 3 holes and you will see the pulley on the edge. remove the old one , place the new one around the pulley then the pad support.

Product description

Remember when you had to sand those rough edges by hand? With the WEN variable speed handheld oscillating spindle sander, easily smooth out arcs, curves, contours, odd shapes, straight edges, and more. The WEN variable speed handheld oscillating spindle sander features a smooth and powerful 5-Amp motor. The sanding spindle oscillates between 50 to 90 times per minute, with an RPM that can be set anywhere from 1800 to 3200 rotations per minute. Our package includes four sanding sleeve sizes (1/2 in., 3/4 in., 1 in., And 1-1/2 in.) and three rubber Drums (3/4 in., 1 in., And 1-1/2 in.), providing you a Spindle diameter to match whatever the situation requires. Quickly transform this unit into a benchtop spindle sander with the included Clamps and mounting pad. Simply place the unit upside down on the surface of your choice, and secure it into place for a reliable stationary sanding machine. The adjustable guide Plate provides a straight edge for consistent and reliable material removal. The 1-1/2-inch dust port attaches to the dust Collection system of your choice, helping to control sawdust and minimize cleanup. This unit is also compatible with the WEN 5932SPC replacement sanding sleeves. And because it's a WEN product, your portable spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a nationwide network of experienced service technicians. It's time to make any difficult sanding task a breeze. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Lightweight and portable design allows for easy handheld sanding in hard-to-reach places
• Easily transform your portable handheld unit into a stationary benchtop spindle sander by clamping it to your workbench with the included mounting hardware
• Powerful 5-Amp variable speed motor provides anywhere from 1800 to 3200 rotations and 50 to 90 oscillations per minute with a 1/4-inch stroke
• Features four different sanding spindle diameters: 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles
• Includes four 80-grit sanding sleeves, three rubber drums, one non-marring rubber mounting pad, Two clamps, an adjustable Straight-edge guide Plate, an onboard 1-1/2-inch dust port, and a two year warranty

User questions & answers

Question:	Does it have the inserts that go around the smaller sleves (1/2") so you can stand smaller things or are smaller things going to fall into it
Answer:	There is a large 13mm washer that is assembled onto the shaft before the sanding sleeve that helps prevent any small work pieces from entering under the base plate. If you have any other questions don't hesitate to reach out to us at 1-847-429-9263 (M-F 8AM-5PM CST)
Question:	Could you use a 2" sanding sleeve with this sander
Answer:	No, I don't believe you can. The arbor is of a fixed height.
Question:	What kind of sandpaper are these, garnet? Aluminum oxide
Answer:	Aluminum oxide.
Question:	Does this sander use standard sanding sleaves
Answer:	No, it does not!! The sleeves that come with this sander are only 3" in length. Once again, someone answering a question without knowing what they are talking about. The WEN sanding sleeve kit Amazon recommends for this sander are the standard 4 1/2" long and are meant for the WEN sanding table...not this portable sander. I suppose you could cut them to 3", but the kit also includes 2 larger diameter sleeves that can't be used with this sander. Big Horn is the only manufacturer I can find on Amazon that makes 3" long sanding sleeves.

User questions & answers

Question:	Will this fit a wen 2305 rotery tool? Thank you
Answer:	I don't think so. They are made for a Dremel. If you have an accessory bit for your drill that is Dremel sized, maybe. But Dremels are reasonable, why not just get a Dremel? I have 3. I use the battery powered Dremel & these sanding drums to sand down my dogs' nails. Takes some training, but it doen't split old dog nails like clipping & you can round off the edges nicely. You use a Dremel like a pen, so you have precise control.
Question:	Will this fit a regular drill
Answer:	I don't know Dremel 4300, but if it will chuck a 1/8" shank, it will work in any of these rotary tools.
Question:	Works with dremel
Answer:	i do not know where it is made. However trying to buy the 3/8 and 1/4 sanding drums does not happen at the lowes or sears or other stores. I set up each size so they would be ready when I need to change what AI am sanding. the drums do last awhile.
Question:	Hi.. May I ask where it is made? thank you
Answer:	No vale la pena comprar ese juego de herramientas son de muy mala calidad y no hacen el trabajo que uno espera.

• SIZE:1/2inch, 3/8 inch and 1/4 inch

User questions & answers

Question:	Can these units be used for foot car
Answer:	This buffer is very smooth an quiet!
Question:	What size collet is needed? Do they work with a dremel
Answer:	Yes, this machine has the filters for collecting the dust.
Question:	Are these compatible for the Dremel
Answer:	The speed of this polisher is 0-8000 rpm/min (Revolutions Per Minute), and the power of the motor is 200W. You can see the details of the product pictures, which have detailed specifications about the motor.
Question:	Can these bits be used for wet sanding
Answer:	16/3 AWG gauge cord

Product features

Coceca, 458pcs Sanding Drum Set

We provide multi-grit sanding drums, you just need to slide the sanding drums into the drum sander, you can directly start your project.

High quality sanding drums can be widely used in nut carving, wood, metal, plastic, jade, circuit board and other DIY processing.

Package include

(80grit,1/2 Inch) sanding band x 24 (80grit,3/8 Inch) sanding band x 24 (80grit,1/4 Inch) sanding band x 24 (120grit,1/2 Inch) sanding band x 24 (120grit,3/8 Inch) sanding band x 24 (120grit,1/4 Inch) sanding band x 24 (240grit,1/2 Inch) sanding band x 24 (240grit,3/8 Inch) sanding band x 24 (240grit,1/4 Inch) sanding band x 24

(320grit,1/2 Inch) sanding band x 24 (320grit,3/8 Inch) sanding band x 24 (320grit,1/4 Inch)sanding band x 24 (400grit,1/2 Inch) sanding band x 24 (400grit,3/8 Inch) sanding band x 24 (400grit,1/4 Inch) sanding band x 24 (600grit,1/2 Inch) sanding band x 24 (600grit,3/8 Inch) sanding band x 24 (600grit,1/4 Inch) sanding band x 24

1/2 inch Drum mandrel(Shank Diameter2.35mm) x 4 1/2 inch Drum mandrel(Shank Diameter3.17mm) x 4 3/8 inch Drum mandrel(Shank Diameter2.35mm) x 4 3/8 inch Drum mandrel(Shank Diameter3.17mm) x 4 1/4 inch Drum mandrel(Shank Diameter2.35mm) x 4 1/4 inch Drum mandrel(Shank Diameter3.17mm) x 4

Free: 2.35mm Self-Tightening Drill Chuck x 2