11 best 4 inch bench grinder

Product description

Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. These machines allow for simple resuscitation of dull blades, scissors, screwdrivers, and more. Compact yet powerful, the WEN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for material removal and general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. This fast speed is ideal for deburring unwanted edges and rust removal. Built with you in mind, our design makes wheel guard removal simple for easy wheel changes. The included eye guards can adjust to prevent them from interfering with your project. Also, don't forget about the flexible work light helping to illuminate your grinding for an increase in accuracy and precision. Of course, as with all WEN Products, our 6-Inch Bench Grinder is covered with a two-year warranty, a friendly and knowledgeable customer service hotline and a national service network. No need to waste anymore money on new tools. The WEN 6-Inch Bench Grinder will save you money by leaving all of your tools as sharp and clean as the day you bought them. Remember when your blades could actually cut through something other than butter? Remember WEN.

• 2.1-Amp motor
• 3450 RPM at no load
• 6 in. by 3/4 in. wheels, 1/2 in. arbor size
• Lightweight design weighs in at 16 lb.Lamp:120V, 40W (Bulb not included)
• Worklight for maximum precision and visibility

User questions & answers

Question:	Will this grinder work for making knives
Answer:	If you are serious about making knives, I would get heavier and mote powerful.
Question:	How do you secure it to the workbench
Answer:	2 holes at the bottom for bolts to secure to a bench. Place Bench Grinder on workbench, use holes as a template and mark with pen the 2 positions for the bolts. Remove Grinder, drill holes and secure with bolts, washers and nuts. Ten minutes.
Question:	How hard is it to put a polishing wheel on? And how good does it do? I'm doing it for restoring straight razors
Answer:	Polishing wheel can be installed easily. This particular model will serve you well as the speed is not high but will polish without damage to mayerila or wheel.
Question:	does it come with wheels
Answer:	Grinding wheels yes it comes with 2. 1 @ Coarse (36 grit) AND 1 @ General Purpose (60 Grit) the higher the grit the lower roughness.

Product features

Let the Sparks Fly

Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. This package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for general purpose grinding and a coarse 36-grit wheel for faster material removal. With a quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. Built with you in mind, the design makes wheel guard removal simple for easy wheel changes. And of course, as with all WEN Products, our 6-Inch Bench Grinder is covered by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to ensure you remember WEN.

Sturdy Base

Our heavy duty base reduces wobbling during operation and ensures safe mounting.

Flexible Work Light

A flexible work light illuminates the work space, promoting accurate sharpening.

Two Wheel Grits

Use the 60-grit wheel for general purpose grinding and the 36-grit wheel for faster material removal.

Protective Eye Guards

Eye guards provide vital protection from sparks and debris for safe operation.

WEN Cast Iron Bench Grinder Stand Available

As all woodworkers know, a bench grinder on a normal work surface often times jostles and skews the other items in a work area due to heavy vibrations created by the grinder. The WEN Bench Grinder Pedestal Stand (sold separately) resolves this issue by providing an independent surface to attach your grinder. The heavy cast iron and steel design limits vibration while providing a sturdy 31.5-inch pedestal for your grinder to rest on. The stand includes a water pot for quenching workpieces, a reliable three-legged design with bolt holes for fastening your stand to the floor and a 9.9-by-12.4-inch cast-iron top with slots and holes for securely mounting your bench grinder.

Product description

Features:



1pc 4 inch Sisal wheel, 1/2" thick, is super rigid for 1st step rough buffing treatment.

1pc 4 inch Denim wheel, 1/2" thick, is less stiff for 2nd step coarse buffing.

1pc 4 inch Yellow wheel, 1/2" thick, is medium soft for 3rd step medium treatment.

1pc 4 inch Cotton wheel, 1/2" thick, is soft for 4th step fine polishing.

1pc 4 inch Flannel wheel, 1/2" thick, is ultra soft for final step delicate polishing.

All 5 wheels are 1/2" arbor hole.

2sets 1/4" shank can be used for most drill with 1/4" shank.





Specifications:



Type: Buffing and Polishing kit

Color: White, Yellow, Black, Brown

Diameter: 4Inch

Thickness: 1/2inch





Package Included:



5 x 4Inch Buffing Polishing Wheels

2 Sets 1/4" Shank.

• 【Dimension】Diameter: 4", Arbor Hole: 1/2", Thickness: 1/2"
• 【Good Quality】High grade wheels with thick stitching for extra long life, Material: Cotton.
• 【Use】Suitable for buffing and polishing wood, plastic, metal, brass, aluminum, stone etc
• 【Easy to install】The 4 inch polishing wheels with 1/4 inch Handle fits most drill
• 【Package Included】5 x 4Inch Buffing Polishing Wheels, 2 Sets 1/4" Shank.

Product features

Easy Cleanup

Versatile coffee mug is a snap to clean up. Simply place in the dishwasher and it's done. No fuss, no hand washing needed. Designs are sealed onto the mug to prevent fading making all Cottage Creek mugs completely dishwasher safe.

Perfect Size

Measuring 5 inches tall by 4 1/2 inches in diameter, this Cottage Creek coffee mug is just the right size to fit any hand snugly and securely.

Microwave Safe

Pop any Cottage Creek mug in the microwave to keep your favorite coffees, teas hot chocolates and more warm. These awesome coffee cups also work perfectly for muffin mug and cake mug recipes. Just remember to handle all warmed objects in a microwave with care.

Use Everyday

Crafted from durable, reliable stoneware; Cottage Creek mugs are designed for everyday use for years to come.

Product description

Remember when you spent all that money replacing dull, rusty tools? From deburring ragged edges to sharpening blades, the WEN Bench Grinder saves you time and money by resuscitating old, worn down knives, tools, and bits. Compact yet powerful, the WEN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2. 1-amp motor, expect quick startups and smooth performance at speeds of up to 3450 RPM. Built with you in mind, our design makes wheel changes quick and easy. The onboard, impact-resistant eye shields keep your eyes safe and your project visible. Adjustable work rests pivot to allow for angled grinding applications. And because its a WEN product, your bench grinder comes backed by a two year , a stocked inventory of replacement parts, and a friendly customer phone line. No need to waste any more money on new tools. The WEN 6-Inch Bench Grinder revives all of your tools back to their original sharp state. Compatible with the WEN WW6012 6-Inch Wire Wheel. Remember when your blades could actually cut through something? Remember WEN.

• Perfect for sharpening Dull tools, knives, blades, bits and more
• Includes one 60-grit wheel for general purpose grinding and one 36-grit wheel for faster material removal
• Quiet 2. 1-Amp motor turns wheels at speeds of up to 3450 RPM
• Features pivoting tool rests and adjustable eye guards
• Accepts 6-inch by 3/4-inch grinding wheels with 1/2 inch arbors

User questions & answers

Question:	Is there multiple speeds
Answer:	No and the speed it does run at is no where near enough rpms to even scratch anything. Junk tool.
Question:	is its RPM good enough for buffing/polishing jobs
Answer:	Yes it is a high speed and will create a good amount of friction for buffing.
Question:	Can it sharpen cutlasses & hunting knives
Answer:	It’s a grinder like any other, it can sharpen knives, but a sharpening hone is much better to use.
Question:	Is it necessary to mount to a workbench? Thx
Answer:	I've used it several times for light grinding without it being mounted and it stayed in place very well. The grinding was for sharpening mower blades and some light shaping, nothing that required more than very light pressure on the grinder. With that being said, if it is not mounted, even with light grinding it can 'walk' around so it's important to keep an eye on it and make sure that it stays in a safe position.

Product features

WEN BG4266 2.1-Amp 6-Inch Bench Grinder

Compact yet powerful, the WEN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2.1-amp motor, expect quick startups and smooth performance at speeds of up to 3450 RPM. Built with you in mind, our design makes wheel changes quick and easy. The onboard, impact-resistant eye shields keep your eyes safe and your project visible. Adjustable work rests pivot to allow for angled grinding applications. The WEN 6-Inch Bench Grinder revives all of your tools back to their original sharp state. Compatible with the WEN WW6012 6-Inch Wire Wheel. Remember when your blades could actually cut through something? Remember WEN.

Features

• Perfect for sharpening dull tools, knives, blades, bits and more
• Includes one 60-grit wheel for general purpose grinding and one 36-grit wheel for faster material removal
• Quiet 2.1-amp motor turns wheels at speeds of up to 3450 RPM
• Features pivoting tool rests and adjustable eye guards
• Accepts 6-inch by 3/4-inch grinding wheels with 1/2 inch arbors

Product description

The Buffing polishing is ideal for Polishing for wood,metal,brass, aluminum, bronze stone and cast iron etc,White polishing wheel is softness，Yellow polishing wheel harder;The Buffing Wheel Arbor Adapter suitable for most of drill.



Package Includes:

1 X 4 inch White polishing wheel

1 X 4 inch yellow polishing wheel

1 X Buffing Wheel Arbor Adapter

• 【Easy to install】:The 4 inch polishing wheels are 2/5" center hole fits most Mini Bench grinder,and with Adapter（2/5 Inch to 1/4 Shank）for any drill
• 【Perfect group】: White soft cotton polishing wheel for finish ;Yellow treated buffing wheel is harder for heavy duty cleaning and oxidation removal
• 【Usage】:The buffing Polishing wheel ideal for all metal
• 【Make your work easy】:Easy and effortless, improve work efficiency.
• 【Dimensions】:White polishing wheel DIAMETER: 4 inch. Height: 5/8 " (50 ply) Yellow treated polishing wheel:DIAMETER:4 inch. Height: 5/8" (42 ply)

Product description

4" x 1" x 5/8" Unmounted Aluminum Oxide Flap Wheels by BHA - Black Hawk Abrasives are built to last. Manufactured using premium aluminum oxide grains and x-weight cloth flaps which is more stiff, durable and thick than a paper or film backed alternative. Each 4 inch unmounted flapper wheel is designed with their flaps arranged in a circular fan shape around the center arbor hole. This design increases the useful life of the 4 inch flapper wheel and provides flexibility to grind flat or curved work pieces. As the 4" x 1" x 5/8" flap wheel with a hole is used the flaps wear down, exposing new fresh aluminum oxide grains which provides a long duration of consistent cuts. Additionally, the fan shape of these 4 inch flap wheels allows for added flexibility which makes them ideal for grinding irregular shaped or contoured work pieces. Unmounted large flap wheels can conform to most shapes and are especially effective on pipes, tubes and other cylindrical items and are designed to be used on a bench grinder, pedestal grinder, or straight finishing tool with a 5/8 inch arbor. So if you have a flat or irregular surface made of metal, wood, rubber, fiberglass, or plastic that you need to grind, blend, deburr, clean, polish, or sand the 4 inch by 1 inch by .625 inch flapper wheel is the abrasive you're looking for.

• Premium Aluminum Oxide Abrasive Grains
• Sturdy X-Weight Poly / Cotton Cloth
• 4 Inch Diameter x 1 Inch Wide Sanding Surface x 5/8" Diameter Center Hole
• For Use on a Bench Grinder or Pedestal Grinder
• Max RPM: 8,800

Product description

Bench Grinder Wire Wheel is used for cleaning threading parts, tubing, garden tools, shop tools and other metal parts.

From the Manufacturer

Century coarse wire brushes are for preparation of metal and rubber surfaces for adhesive bonding. Removal of rust, scale, slag, and paint. Deburring, light grinding and carbon cleaning. Plastic flash removal.

• Bench grinder wire wheel used for cleaning threading parts tubing garden tools shop tools and other metal parts
• Ideal for cleaning in crevices and contours
• 1/2" arbor hole
• .0118 crimped wire, coarse

User questions & answers

Question:	What is the arbor size
Answer:	No
Question:	Does this wheel have a 1/2" arbor
Answer:	Yes!
Question:	What is the RPM rating and would it it work on a angle grinder
Answer:	25 1/2
Question:	What size is the arbor
Answer:	You can but the handle is a very cheap plastic like a child’s toy, but if you are looking for a small adult size it will work.

Product features

Even Wire Count for Balanced Power Brushing

Even wire distribution reduces vibration, operator fatigue and will increase tool life.

Solid-ring construction (Crimped Wire Brushes) holds each wire to a solid ring which ensures the brush runs smoother and longer with less vibration.

Solid mounting plates (Knot Wire Products) have evenly spaced holes to prevent knotted wire from moving on the brush for consistent power brushing.

Multi-Purpose

Heat treated steel wire for cleaning in crevices and contours.

• 【COMBINED BELT & DISC SANDER】 - The bench belt sander is combined with a belt sander and a disc sander, making easy work of achieving a fine and smooth finish on component pieces. The belt sander features both horizontal and vertical sanding. The disc sanding tables can tilt 45 degrees.
• 【DURABLE STEEL CONSTRUCTION】 - The disc-and-belt sander is made of heavy-duty steel. It is durable and can be used for a long time. A strong base with rubberized pads provides extra stability, avoiding any heavy vibrations when you operate.
• 【EASY OPERATION & MOTOR 375W】 - This disc belt sander works well with a high-speed pure copper motor. This super-strong motor runs smoothly, and the energy consumption is low. Power: 375W. The safety switch is easy and safe to operate.
• 【CONSIDERABLE DETAILS】 - It is easy and quick for you to adjust and change the belt. The deluxe miter gauge makes your work more accurate. No-load speed for sanding disc: 1420/min. Belt size: 915×100 mm/36" x 4". Disc diameter: 150 mm/6".
• 【WIDE APPLICATION】 - This belt and disc sander can satisfy you and work great in grinding metals, wood, acrylic, and other materials. It is widely used in parts factories, building materials factories, etc., perfect for tool polishing.

Product features

Horizontal & Vertical Sanding

The 4” x 36” belt platform can be adjusted from 0-90° to accommodate almost any projects. A bench apron makes the sanding smooth and efficient.

Precise Angle Sanding

The 6” disc sander is suitable for multi-angle sanding, meeting your different needs. The work table adjusts from 0-45° for smoothing out beveled edges.

Adjustable Miter Gauge

On the disc sander work table, a miter gauge is equipped for high-precision angle adjustments. You can easily adjust the miter gauge.

Cast Steel Frame

The belt disc sander is constructed of high-strength steel, solid and durable. The thickened base with rubberized feet is sturdy, ensuring extra stability.

Copper Motor & Switch

Power: 300 W; Speed: 1450 r/min. A full copper motor provides plenty of power to sand and smooth projects with low noise. The waterproof safety switch is easy to operate.

Various Application

This commercial belt sander is used to smooth and deburr jagged edges for metals, wood, acrylic, and other materials. It is suitable for parts of factories, building materials factories, etc.

Belt and Disc Sander

This belt disc sander is an ideal machine for stock removal, profiling, handles and finish work, satin or mirror finish. It is constructed of steel that makes this sander solid. This product is small and exquisite, suitable for grinding and sanding work of handmade crafts, carpentry chamfer on the work-piece, etc.

• ★Excellent Quality: Our white flannelette polishing wheels are made of high-quality cotton cloth with soft surface and high grinding efficiency! They are durable, wear resistance and have a long service time.The soft material couldn’t damage your cherished objects while using cloth wheel.
• ★Good Working: Thick concentrically sewn design holds plys together more stiffly so greater pressure can be applied,not easy to loosen during buffing!Easily polish faded wheels, manifolds and more.
• ★High-Value Tool Set: 1Pcs 4’’ Cotton Polishing Wheels and 2 Pcs 6’’ Cotton Polishing Wheels with 1/2’’ Arbor Wheels. Grit of white buffing wheel is fine, the polishing wheels are 1/2" center hole fits most bench grinder.
• ★Widely Application: Widely used in Car, Jewelry, Hardware, Plastic, Glass and Metal, such as Aluminum, Stainless, Steel, Brass, Cast-iron, Auto Body work & Jewelry.Each buffer piece fits into all of the small crevices of your rims and does the job right!
• ★100% Satisfaction: We're so confident that you'll love Sugelary Buffing Polishing Wheel that we'll refund every penny if you don't like it! if you have any problem about it, refund or replace new one quickly, contact us any time for help.

User questions & answers

Question:	Could these attachments be used for glass? If not, would the adapter fit others that would
Answer:	the length is 23 1/2 inches
Question:	Can this be used to get scratches out of brass
Answer:	Depends on the tripod. The unit does come with enough adapters to be able to accommodate 1/4-20 studs, 3/8-16 studs, and even 5/8 unthreaded stud. If your tripod has any of these types of mounting studs you will do just fine. The flash on the other hand you will have to be more cautious. The flash shoe on top of the Fotodiox bracket is totally made out of plastic. For lighter flash units, I guess the flash shoe will not be much of a worry. But if you tend toward taller, heavier units and like to add on extras like umbrella reflectors then be careful. Don't get me wrong, I got half a dozen of these units myself and they are fantastic for the price. But, I am not using them for holding flash units. I actually have removed the flash shoes and screwed the exposed 1/4-20 stud into some lightweight lamp fixtures. I am very, very pleased with the tilt and swivel functions this bracket gives me. (And the movements are both smooth and secure to boot.)
Question:	would these fit in a dremel tool
Answer:	I use this with the nikon SB600, SB700 and the SB910. No need anything else, comes with cold shoe adaptor. Remove the cold shoe adaptor from the head and screw the Nikon shoe stand that came with the flash onto the 1/4" stud to attach your flash and you are good to go.
Question:	What is the max and recommended RPM for these wheels
Answer:	Wide enough

Product features

Sugelary Polishing Wheels Kit has the following advantages:

• Various Styel Wheels

Different sizes to meet different needs.

• Well-selected Material

It is made of mutillayers cotton cloth sewn surround by the center,with a leather lip attached around the inner hole.

• Durable

Buffing wheel for drill have given your rims a nice shine and look. They also can be reused. Offers a long time service

• Surface Polishing

The material is soft so it does not cut ridges into the metal you are working.

Product description

4 BUFFING SOFT POLISHING BUFFER POLISH WHEEL FOR BENCH GRINDER



1/2" Arbor Hole Size Fits Most Bench Grinders

Great For Buffing And Polishing

Thickness: 1/2"

Quanity: 2 (picture Shows One; But This Listing Is For TWO 4" Buffing Wheels)"

• 4 BUFFING SOFT POLISHING BUFFER POLISH WHEEL"
• FOR BENCH GRINDER 1/2 Arbor Hole Size Fits Most"
• Bench Grinders Great For Buffing And Polishing
• Thickness: 1/2 Quanity: 2 (picture Shows One;"
• But This Listing Is For TWO 4 Buffing Wheels)"

• 【Function】This 3" & 4" Wood Bowl Buffing ball are mainly designed to polishing the inside of the wood bowls, also can be used for any other suitable items or objects. They are really perfect for final polishing the inside of bowls.
• 【Application】This bowl buffer wheels has threaded shaft, it should be combine the suitable threaded coupler mandrel (already included in the package) to use, the threaded mandrel can fit for both 1/2” & 5/8” shaft bench grinder or motor.
• 【How to Use】Mounted this bowl buffing wheel to the threaded mandrel, attach the mandrel to the bench grinder, then start your buffing polishing work.
• 【Material】This buffing ball is made of loose cotton cloth, the loose layers design make it more flexible, softer and easier to fit the polishing objects inner contour, to achieve better polishing effect.
• 【Dimension】3in buffing ball Dia x H: 3" x 1-3/8"; 4in buffing ball Dia x H: 4" x 1-1/2"; threaded mandrel ID x L: 1/2" & 5/8" X 3-1/2". Package: 1Set.

Product features

3" 4" Bowl Buff System with Mandrel for Bench Grinder Home DIY

Product description

These are diameter 4 inch soft buffing and polishing wheels which are ideal for stainless steel, chrome and other metals. Excellent buffing and polishing for wood metal stone brass, aluminum, bronze. The 1/2" arbor hole fits most of the bench grinder、 bench Buffers or bench polisher .

• DIAMETER:4 inch Face,1/2" Arbor Hole, H: 1" (50 ply) Material: Cotton.
• The polishing wheels are 1/2" center hole fits most bench grinder.
• High grade cotton wheels for extra long life.
• Polishing and buffing wood,metal, cast iron,brass, aluminum bronze and stone etc
• Package: 2pcs 4" cotton polishing wheels

User questions & answers

Question:	Will this fit a Makita GB600 grinder
Answer:	it comes with an outer package and inter includes the carry bag.
Question:	The description states that the 8" are 1" thick while one of the pics show a 50ply sample measuring 15mm. That is just short of 5/8". Which is it
Answer:	yes
Question:	Do the 12" buffing wheels have a 7/8" arbor hole or is that a misprint
Answer:	Yes